100%ROOT + TWRP RECOVERY
NOTE:This Was Tested By Me On TAB 4 t231 with Firmware Version T231XXU0ANG1_T231ODD0ANF3_INU ; It May Work With Latest Firmware Verions , But I Haven't Tested
REQUIREMENTS:
* PC
*TAB 4 T231
*DATA CABLE
*PROPER DRIVERS INSTALLED
*ODIN V3.09.zip HERE and Extract thanks to @thisisapoorusernamechoice
*Download TWRP from HERE AND EXTRACT
* DOWNLOAD SuperSU from HERE
INSTRUCTIONS:
RECOVERY :
Put your tablet in download mode by Pressing the Home button + Power + Volume Down; Release buttons ,wen u see a warning ; then you should press the volume up (vol +) to continue to download mode.
* Run Odin v3.09 and connect tablet, The box in odin will turn to light blue box ID: COM;
* Check The AP box and locate the unzipped file TWRP file recovery.img.tar.md5;
*Finally click on the Star button and wait for few seconds until Odin process and show you the notice Pass in green and completely restart the tablet, click Exit to exit Odin.
RECOVERY WAS SUCCESSFULLY FLASHED
ROOT
*BOOT INTO RECOVERY BY PRESSING POWER+HOME+VOL UP
*NOW SELECT INSTALL ZIP FROM SD CARD
* CHOOSE THE sUPERSU.ZIP
*CONFIRM YES BY SWIPING
REBOOT CHECK WITH ROOT CHECKER
SUCESSFULLY ROOTED Tab 4 t231
Credits and drivers
DRIVERS
*INSTALL SAMSUNG USB DRIVERS FROM HERE HERE
*IF IT DOESNT DETECT MOBILE , TRY PDANET+ DRIVERS FROM HERE
CREDITS
*ALLAH(SWT)
*GOOGLE
*XDA
*TWRP & UNKNOWN COMPILER
* @Chainfire for Supersu.zip
*odin
*Myself(ofcourse)
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
shawn718 said:
Can i use this witn sm t237p
Sent from my SM-T237P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i second this. will it work with the SM-T237P?
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
thisisapoorusernamechoice said:
ATTENTION! Do NOT use the download links for Odin in the OP! It has been reported that the link will install malware on your computer. If you need Odin 3.07 or 3.09, I have attached them to the bottom of this post, both files are 100% safe. They're zip files, just extract the folder inside to your desktop; to run Odin just double click the .exe file, yes it's that easy. @Faiyaz5yaz thank you for making this thread, it is always a good thing to instruct users how to root their devices, but please either change the Odin download link or at the very least remove it from the OP. Unfortunately it messed up another user's computer so bad he had to reinstall windows
Click to expand...
Click to collapse
updated !!! thank u
Worked like a charm on my T231
THANK YOU SOOO MUCH
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
C,
when you flash recovery with odin you must DESELECT auto restart.
when the flash is done [res-ok] disconnect your tab and manually reboot to RECOVERY.
then reboot as normal.
m
Dark_Cristian said:
Sorry but i follow the Stephen. I got a sm-t231 and flash with odin and see the pass sign but when I reboot into recovery isn't see the TWRP recovery just the stock recovery... What's wrong?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tab-4/development/root-root-twrp-recovery-samsung-galaxy-t3021471
http://forum.xda-developers.com/tab-4/general/root-tab-4-sm-t231-gsm-wifi-t3010102
@Faiyaz5yaz
Thanks TWRP works great on my Tab 4 T231
:good:
Related
Using Flash Tools to Flash TWRP Recovery to A116
Requirements:
TWRP Rewcovery
Flash Tool
A computer
A Micromax A116 (obviously)
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps :
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Downloads :
TWRP Rrecovery :
http://d-h.st/IsY
Kernel Sources :
http://yadi.sk/d/fmIOi_ee6ADpi
MT6589 Scatter File :
https://www.dropbox.com/s/p0oc0769t5igt8s/MT6589_Android_scatter_emmc.txt
SP Flsh tools:
http://www.mediafire.com/?7ccl2tw67tklxdk
Drivers:
http://www.mediafire.com/download.php?nv96xclhjmaiclu
64bit drivers:
http://forum.xda-developers.com/showthread.php?t=2206421
TWRP is tested working.
Changelog :
[23/05/2013]
1. TWRP Updated to 2.5.0.0
2. Auto Root Fixed
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Vijay
Press Thanks button if I helped!!
Great !!
lol. Installed the newer version of CWM just 5 minutes back. Installing TWRP now. lol. Wish i had seen this post before.
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Abhiroxx said:
Can anyone make flushable zip to flash it via can recovery...
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
+1 for this..
Sent from my Micromax A116 using xda app-developers app
reboot problem
hi
i seem to be having some problem rebooting system does it take some time to reboot i waited for some time it did not reboot and then i pulled out the battery and booted the phone kindly advise on the same
thanks in advance:good::laugh:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
kumar abhishek said:
Using Flash Tools to Flash TWRP Recovery to A116
Steps:-
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with TWRP recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device.
5. In the extracted folder of the stock rom, go to the folder named "S9201_MP_F4_B1_IN_MMX_0.16_flasher_user" and select the file "MT6589_Android_scatter_emmc" which is our scatter loading file.
Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
**Don't interrupt this process as it can potentially brick your device.
**Make sure no power interruption takes place. (Use a laptop to ensure this).
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Auto Root Installation:-
This version has the built-in Auto-Root feature for non-rooted devices...
Steps
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
TWRP is tested working.
[/COLOR]
Credits:
TWRP Tool- yuweng
Testing And Screenshots- Mohammad Abdul Sajid, Manoj Nair
Uploading- Kushal Gupta
Press Thanks button if I helped!!
Click to expand...
Click to collapse
peekeje said:
After installing TWRP recovery successfully........it doesnt happen automatically when i reboot the phone as below.
Then i tried to install the SuperSU and BIN files thru Recovery, and SuperSu can be found in the App drawer. but the Phone is not rooted when i check thru rootchecker. and even Titanium backup or any other app cant work which require root access.
Pls tell me, how to successfully ROOT the phone. Even SuperSU installed, it cant update the binary.
1. After flashing, reboot -> system -> it will ask you whether you want to install SuperSU -> Swipe to Install
2. After reboot, there is a SuperSU Installer
3. Connect 3G data or Wi-Fi first then only start SuperSU Installer -> click at TWRP & it will download files then auto reboot & auto install
4. After reboot, SuperSU.apk will be there at app drawer... :good:
Click to expand...
Click to collapse
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
kumar abhishek said:
First of all please dont quote whole post.
It has been confirmed that there is some problem with autoroot
Pls follow root procedure posted in cwm thread
Sent from my C6502 using Tapatalk 2
Click to expand...
Click to collapse
Sorry to quote full.
I tried also the CWM procedure... and flashed both the SU and BIn files. and after reboot, its there in the app drawer. And when i open the SU, and try to update binary also, it fails.
Also, root checker says, Not root access.
can we use mobile uncle tools to flash this......
mohsin2cool said:
can we use mobile uncle tools to flash this......
Click to expand...
Click to collapse
Nope you need SP Flash Tool. Mobile uncle has some problems with mt6589 chipset
Sent from my C6502 using xda premium
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
eagledipesh said:
Hi,
I guess the screenshots are for TWRP v2.4.2.0.
Thanks!
Click to expand...
Click to collapse
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
kumar abhishek said:
Yup i updated TWRP to 2.5 but not the screenshots
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
Ha ha ha, cool then, i thought its a new thread, what is the major difference if i upgrade?
@kumar abhishek
how were you able to keep the size of this twrp recovery to just within 6mb?.
from what i have checked on the porting tool of yuweng, twrp 2.5.0.0 requires the recovery partition to be adjusted to 7mb?
i am trying to port twrp for the a919i which is similar to the a116 hd.
tia
cant see SD
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
haree said:
hi
i flashed the twrp and the root also done thanks
but this does not show the external SD do i need to do any thing to see it
any way i have flashed the SD swap and it is also working fine
thanks again for ur great contribution:good::laugh:
Click to expand...
Click to collapse
Problem is due to sd swap only
Sent from my C6502 using xda premium
kumar abhishek said:
Problem is due to sd swap only
Sent from my C6502 using xda premium
Click to expand...
Click to collapse
hi
u got me wrong i did the swap after initaly flashing and not seeing the external sd
and the SWAP is working fine now i have 32GB internal storage
thanks...
Upgraded from CWM to TWRP using Mobileuncle tools successfully... thanx
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Worked for me
Thanks
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Mahmoud11111 said:
Worked for me
But please can you give me a custom kernel file for this device SM G531H
because i want to change SElinux mode to permissive
Click to expand...
Click to collapse
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
ndm4ompk said:
Root Galaxy Grand Prime G531H
Download This File And Extract
https://drive.google.com/open?id=0B41td9n4b4IaMUYtNHNSSVV2ZEk
Copy SuperSU-Pro-v2.46-Patched Zip File On Sd Card
restart in Download Mood. Volume Down+Power+Home same Time
Open Odin And Connect Phone With Pc
Open AP And Locate recovery.tar.md5 File in download folder
now start,,
After Done Reboot in Recovery, Volume UP+Power+Home
Slide Baar to enter TWRP
Flash SuperSU-Pro-v2.46-Patched Zip File In SD CARD
now restart System
Open Su And Install On PLAY STORE And Update Normal And Restart Phone
Now U Done Root...
Muhammad Nadeem
Say Thanks
if u want twrp
after flash this teamwin recovery 3.0.0.0
https://drive.google.com/open?id=0B41td9n4b4IaVldfN1hkNGxING8
flash via odine , chang language after
Click to expand...
Click to collapse
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
@Elie.G said:
Twrp worked but supersu didn't work (after flash supersu via twrp my phone went into bootloop):what:
Click to expand...
Click to collapse
flash stock rom tar via odine uncheck auto reboot, after flash pull battery and insert it now go stock recovery with press
volume up+home+power key and do factory data rest and cache and now in download mode and do it again..
(only do first not flash twrp 3.0..0.0)
(first u on g531h)
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
On phone, hit the Volume Down+Power+Home at the same time :::: This will Initiate Download mode on Grand Prime
Step 2. Use Odin
On computer, open Odin. Connect your Phone to PC :::: Odin will recognize your device in Download mode
On Odin, click AP --> choose recovery.tar.md5 file --> click 'Start' on Odin. :::: Odin will start working and your phone will auto-reboot when it finishes
Step 3. Install SuperSU
On phone, hit the Volume UP+Power+Home --> slide the bar to continue :::: This will enter TWRP (recovery)
On TWRP, click install --> choose SuperSU-Pro-v2.46-Patched zip file in SD card --> slide the bar --> hit restart :::: This will install SuperSU and phone will restart
Step 4. Optimize your root!
On phone, open SuperSU app --> click PLAY STORE (to update/install via Play store) ---> hit update/install (in Play store).
Open SuperSU app again --> Update Normal --> hit Restart phone.
This finishes the last step of rooting. Your phone is rooted!
*You can check with Root Checker Basic app.
Click to expand...
Click to collapse
When i try the 3 step doesnt apeer the twrp recovery, on previous step seem to be all ok.
Thanks millomilky, my english is not good but u explain it very well, thanks again and i appreciate your work,,
Sent from my SM-G900V using XDA Free mobile app
In step 3 1st time apear a slide bar, slide it right to enter twrp,
Sent from my SM-G900V using XDA Free mobile app
ndm4ompk said:
sorry bro i d'nt have, but i send soon
try this man
http://forum.xda-developers.com/grand-prime/general/samsung-galaxy-grand-prime-ve-g531h-t3295706
i don,t try but u done and tell me, thanks
Click to expand...
Click to collapse
Unfortunately , this custom kernel is not compatible with my device , my device stucked at boot and said "kernel is not seandroid enforcing"
So i restored my stock kernel again which i backed it up.
Please anyone have any ideas about changing SElinux mode to permissive on this phone SM-G531H don't forget me
I tried selinux mode changer app and terminal emulator but doesn't work for me
Ok i m trying find like u,,
Sent from my SM-G900V using XDA Free mobile app
Is this thread works on AOK2?
Finally, My phone has been rooted now
Now. I just need the touchwiz music player for this device.
Because This device doesn't have the default (music player).
If u have g531h then answer is yes,
Sent from my SM-G900V using XDA Free mobile app
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Zainelabdeen said:
thank you
It is one hundred percent secure :good:
Now I feel the freedom that search for it three months ago
Click to expand...
Click to collapse
Thanks Zain
Does this method work in the sm-g531h/dl variant?
I ask because i have a problem recently with a recovery for the sm-g316ml/ds. I flash a recovery for the sm-g316ml and it didnt work. thanks in advance
thanks before
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
riefers212 said:
mellomilky said:
Thanks! Mr. ndm4ompk!! (original poster's name)
It WORKED for me!!!
After searching for 3 months,
I've finally found a working ROOT solution for Grand Prime G531H.
I want to thank the author and want to write step-by-step how I followed him.
------------------
Below I've refined the original manual:
Step 1. Prepare your phone for rooting process.
On computer, copy SuperSU-Pro-v2.46-Patched zip file onto SD card.
On phone, go to Settings --> Developer Options --> Check the Manufacturer unlock :::: This will turn off a lock
No developer option menu on my g531h.
I have failed block by frp lock
Click to expand...
Click to collapse
This picture might help. Screenshot is taken from G531H that I rooted using this guide.
Rooting on some other devices does not require turning-off FRP lock.
But it's always better to turn-off FRP lock (to check Manufacturer unlock).
Click to expand...
Click to collapse
For NewBie'sHii Today Iam Going To Help All New Users Of Grand 2 SM-G7102,SM-G7105.
BasicIf U Want To Install New Custom Roms Or Any Type Of Custom Rom Then Follow The Steps.
●First You Need A Custom Recovery To Install A Custom Rom Or Any Zip Files
●There Are Many Custom Recovery Available For Grand 2 Both Varients(But I Recommend TWRP).
How To Install Custom Recovery ?●First U Need To Download TWRP Recovery
●The Recovery Should Be In Tar Format(Odin Flashable)
●Then U Need To Download Odin Latest Version(I Added The Files Link Below)
●Then Extract Odin.zip In Desktop And Open Extracted Folder From There
●Now U Need To Access Your Phone Into Download Mode,To Access Download Mode U Need To Press(Volume Down+Home Button+Power Button Together)Then U Will See An Android Icon On Your Screen Press Volume Up Button To Continue,Now Connect Ur Device To Your PC Via An USB Cable.
●Ok Now Last Step Is Open Odin As Administrator By Right Click On Your Mouse.
●Now U Will See That Odin Is Opened And There Are Many Options Like AP,CP,Etc
●Now U Need To Select Ap Option And Find Ur Recovery.tar File Where U Placed It Then Click Start To Start The Installation.(Uncheck Auto Reboot Option If U Are On Stock Rom Means 4.4.2 Kitkat,This Will Bypass install-recovery.sh)
●It Will Take Some Seconds To Complete When U See Pass Message Then Look At Your Phone.
●Now Remove Battery And Reinsert The Battery And Press Volume Up+Home Button+Power Button) To Enter Into Recovery Mode.And U Will See That TWRP Is Written In Your Screen.
Congrats You're Successfully Installed Custom Recovery
How To Install Custom Rom Or Patches ?●First Download The Rom.zip File To Your Internel Storage Or Externel Storage Wherever U Want.
●Then In TWRP Recovery
●Select>Wipe Option Then Tick 4 Options
●Data,Cache,Dalvik-Cache,And System
●Now Install Ur Rom.zip File From Ur Specific Storage Where U Placed The Rom.zip File And Wait For Installation Complete(If There Is No Patch Required For The Rom,Then Follow This Instruction Only)
●And If There Is Any Patch Required To Fix Any Bug Of Any Rom That You're Installing Then All U Need To Do This Just Follow Above Step But Before Start U Select 1 Option Add Zip Files (Which Is Came After U Select Any Zip File),And Select Your Patch Zip For Your Rom,Then Start The Installation.
How To Fix BootLoop On Your Current Rom ?●Bootloop Is An Irritating Bug Of Any Device.
What Is Bootloop ?
●Look You're Using A Rom Such As Stock Or Custom Rom.And U've Powered Off Your Devicr Or U've Selected Restart,And Suddenly U're Saw That You're Phone Is Not Booting Or Stuck At Samsung Galaxy Grand 2 Logo Or In Boot Animation.And Not Booting Or Not Turning Up The Soft Key Lights.
How To Fix Bootloop ?
●If You've Did'nt Flashed Anything Then Select Wipe Dalvik Cache And Cache,After That Reboot Your Phone And Your Phone Will Start Within Some Minutes.
●If U Flashed Something That Is Not Supported By You're Device And U Dont Know What U've Done And U Saw Bootlooping Then Wipe All Partitions
System
Data
Dalvik-Cache
Cache
Then Reflash Your Rom With Patch(If U Remember How To Do This Then Ok Or Otherwise Follow My Step In This Thread Which I've Written Above.
How To Flash A Rom Without Loosing Any Of Your Personal Data Or Apps ?If U Want To Flash A Custom Rom With All Your Personal Data And Apps Then Stay Chilled You're In Right Place.
●First Of All Go To TWRP Recovery Go To Wipe And Select Only System,Cache,Dalvik-Cache Do Not Wipe Data
●Then Flash Your Favourite Custom Rom With Out Loosing Your Apps And Personal Data. :good:
Anirban Ganguly[email protected] Grand 2 duos,Lte(4G) Hit Thanks●If U Need Any Help Then Feel Free To PM Me At Xda.
●More Guides Are Coming Soon.
●Iam Bit Busy In Development,So When I've Free Time I Will Add More.
DownloadsDownloads Link In 3rd Post.
How To Install Boot.img Or Recovery.img Without A Pc ?●First You Will Need To Download Flashify From Play Store
●Open Flashify And Give It A Root Access
●Then Select Flash Img
●Then locate Your Img File Wherever You Placed It And Select Flash
●It Will Automatically Reboot
Thats It For Now More Guides Are Coming Soon
Reserved
DOWNLOADS
●TWRP[ms013g][Grand 2 Duos SM-G7102]
http://forum.xda-developers.com/galaxy-grand-2/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3107535
●Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Anirban Ganguly said:
DOWNLOADS
?TWRP[ms013g][Grand 2 Duos SM-G7102]
https://basketbuild.com/devs/aapav01/ms013g/TWRP/3.0.0
?TWRP[ms01lte][Grand 2 LTE SM-G7105]
https://www.dropbox.com/s/8lrh85ps62h2l8l/recovery.tar.md5?dl=0
?Odin
https://drive.google.com/file/d/0BwyPHEL3RNOzRmtlZnA3UmwwZ1U/view?usp=drivesdk
Click to expand...
Click to collapse
Bro Direct links of others work not allowed in xda... better give their thread link...so that no one will report to mod
....
Ok
Please, how do I flash recovery for Samsung Grand 2 without pc?
Billygent said:
Please, how do I flash recovery for Samsung Grand 2 without pc?
Click to expand...
Click to collapse
only possible only when a existing custom recovery installed on your device,if u want to flash zip but if u want to flash img file then follow my guide which is written above
This thread is really helpful for new users. Thx for this thread, really helpful.
Sincerely, NYT
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Flashing Recovery.IMG without PC
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
It is easy and convinient if you're gonna use this method somehow watch out for the bugs because it may cause u to get stuck on recovery booting or download mode (good news is it wont affect with ur memory).
Use flashify, select the downloaded recovery (Extract when needed) and wait for some few minutes to flash the file.
Billygent said:
I want to flash recovery.img for Samsung g7102 but I've got no pc. Is there a way to do that?
Click to expand...
Click to collapse
use flashify if you have root
To root without pc,you can use Kingroot
CF-Auto-Root is no more working to root Samsung A8 after latest Marshmallow update. So here I'll tell you another way to root your A800F or A800I. Also I'll tell you how to install TWRP and Install Xposed. Is little bit complicated but this works.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Prerequisite :
On PC
USB Driver
Odin
Minimal ADB
TWRP Recovery
[*]On Phone Storage
SuperSU
Xposed Installer apk
Xposed SDK
DOWNLOAD LINKS BELOW
Steps
Download all files in a folder and install USB Driver (Skip if already installed). Extract Minimal ADB. Save SuperSU zip on your phone's storage.
Enable developer option on phone ( Tap “Build number” seven times to enable Developer option ).
Enable OEM unlock and USB debugging under developer option.
Put phone in download mode ( Hold vol down + home + power key to reboot to download mode )
Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number.
Now select the recovery file that you have to flash/install on your phone. Click on ‘PDA’ / ‘AP’ and select the file ‘recovery.tar’. (In ODIN, check the Auto Reboot and F. Reset Time options, if not already.) Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete. After the installation is completed, your phone will reboot normally.
Next you have to launch the ADB drivers file. Launch command.bat file from the ADB folder and give the first command to check whether the device is successfully connected to PC or not. A popup will open in your phone. tap allow.
Code:
adb devices
Enter another command to reboot your device into recovery:
Code:
adb reboot recovery
Now you are on TWRP recovery. Click on Install and select SuperSU file that you downloaded on your phone in step 1. and flash.
Flash Xposed SDK too if you want to use Xposed framework
You will get bootloop first time. Its normal. And first boot may take about 10 mins. You don't have to worry. After reboot install Xposed installer to use Xposed.
Done :laugh:
Notes
Do not reboot to TWRP recovery using key combinations. Use any rebooter app to reboot to recovery.
This way is enforcing not permissive. I am searching for permissive. I'll update.
This method works on latest stock firmware.
Downloads
On PC
USB Driver size: 9.2MB
Odin size: 1.1MB
Minimal ADB size: 628.5KB
TWRP Recovery (A800F) size: 10.4MB
TWRP Recovery (A800I) size: 10.4MB
[*]On Phone Storage
SuperSU size: 4.1MB
XposedInstaller size: 611.8KB
xposed-v85.1-sdk23-arm.zip size: 4.6MB
xposed-uninstaller.zip size: 304KB
no command error
z.
adarshbp010 said:
after typing in in the command.bat
it say updating android in my phone after that says no command
did i do something wrong?
Click to expand...
Click to collapse
You have to launch command.bat please read step 7 again. :good:
Hi,
I guess with proper usb driver for other Samsung A series it should work as well ?
Thank you for this guide btw (even though it is not for my device)
shu006 said:
You have to launch command.bat please read step 7 again. :good:
Click to expand...
Click to collapse
..
adarshbp010 said:
Sry i was using some other method
Ur method bought me to a menu sayin reboot now ,install from adb ,install from sd thing
Wat should i do? ;-;
Click to expand...
Click to collapse
Are you on twrp ?
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
hiroprotagonist said:
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
Click to expand...
Click to collapse
my problem is sam. whtas we can. help please
I did all the steps..
but I get seandroid error..
help please
fatihyildirim said:
I did all the steps..
but I get seandroid error..
help please
Click to expand...
Click to collapse
My A800i too.
Sent from my SM-A800I using XDA-Developers Legacy app
fatihyildirim said:
my problem is sam. whtas we can. help please
Click to expand...
Click to collapse
fatihyildirim said:
I did all the steps..
but I get seandroid error..
help please
Click to expand...
Click to collapse
ethanhunt2202 said:
My A800i too.
Sent from my SM-A800I using XDA-Developers Legacy app
Click to expand...
Click to collapse
hiroprotagonist said:
I tried this method and sadly it does not work on my firmware version. Gets stuck on the boot screen when you reboot to recovery and says recovery is not seandroid enforcing...
Version is A800IXXU2BPG7
Click to expand...
Click to collapse
Thread updated. Please download recovery for A800I from download section.
Good working.
Sent from my SM-A800I using XDA-Developers Legacy app
Does the bluetooth work flawlessly using this method?
jumpinjellyfish said:
Does the bluetooth work flawlessly using this method?
Click to expand...
Click to collapse
yes
Cant Enter Recovery Mode
sorry can you help me i do every step you write but it not working it said no command installed. What should i do please help me( my phone is A800F)
Thien170598 said:
sorry can you help me i do every step you write but it not working it said no command installed. What should i do please help me( my phone is A800F)
Click to expand...
Click to collapse
Firmware version ?
@shu006 Xposed framework doesn't want to download....I flashed that xposed SDK and when I installed the app, neither Download/update nor uninstall was available to click on.
biso46 said:
@shu006 Xposed framework doesn't want to download....I flashed that xposed SDK and when I installed the app, neither Download/update nor uninstall was available to click on.
Click to expand...
Click to collapse
Dont look at that.. Just see if framework is installed or not.
Links not working..
This device is more reasonable to buy as it is small and elegant at a decent price.
It is IP68 water-friendly device and the display is much better - higher FPS than on higher resolution OLEDs - good for action games.
Root using CF-autoroot
Download the file from CF-auto-root repository:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
If you have Nougat or after update to Android 7.0:
https://download.chainfire.eu/1090/CF-Root/CF-Auto-Root/CF-Auto-Root-a3y17lte-a3y17ltexx-sma320f.zip
Wipe data + cache before
Flash CF-autoroot before device initial configuration
WARNING! KNOKX will be: tripped. E-fuse: << BLOWN >> Warranty: VOID!
Click to expand...
Click to collapse
Unzip the file
Run Odin from the unzipped folder
Browse by clicking AP button the *.md5 file from the unzipped folder
Connect the A320F in download mode (start the device by holding Power+Home+Volume DOWN)
After starting the device in download mode, press Volume UP one to allow the download
A new COM port should be recognized by Odin after the device is connected via USB
Press Start button in in Odin
Rooting will take place automatically and the device will restart twice.
After the first restart you can disconnect the cable from the PC.
Second restart might take a few minutes.
After that you will find the SuperSU app installed.
Other, more complicated methods:
Rooting using custom recovery:
You will need:
SM-A320F with Exynos CPU (waiting for updates on other model)
Android Marshmallow 6.0.1 on your device
Odin v3.0.4 (download link below)
Team Win Recovery Project - TWRP (download link here) or ClockWork Mod Custom Recovery - CWM (download link below)
(Recommended custom recovery: Team Win Recovery Project :good: - more features, newer, works better)
SuperSU-v2.79-201612051815 (latest ZIP version available today - download link below)
SM-A320F TWRP & CWM recovery installation procedure:
On your device enable developer options and then disable OEM lock (FRP lock) for the device to allow you to flash custom recovery
(Activate OEM unlock from developer options menu)
Boot your device in Odin downlaod mode (hold VolDOWN + Home + Power)
Flash the *.tar file of TWRP or for the CWM using Odin's PDA option
(Uncheck Auto Reboot and F. Reset Time)
Force reboot your device (hold VolDOWN + Power for 10 seconds)
SM-A320F SuperSU ZIP installation procedure:
Copy SuperSU-v2.79-201612051815.zip on a microSD card (trough USB data cable or any other method)
Unplug the USB data cable from the phone and shut down the device
Start your device in Recovery mode (Hold VolUP + Home + Power)
(RECOVERY IS NOT SEANDROID ENFORCED - this warning is normal when booting into CWM custom recovery but not with TWRP)
The recovery menu will appear
> Using TWRP Recovery:
Swipe to allow modifications
Tap on Install
Tap on Select Storage at the bottom and select MicroSDCard then tap OK
Browse for the SuperSU-v2.79-201612051815.zip and tap on it to install it
Swipe to install SuperSU (confirm Flash)
> Using CWM Recovery:
Select Install zip update package (use VolDOWN/VolUP to navigate and Power to select)
Select Choose zip from sdcard
Select SuperSU-v2.79-201612051815.zip and press Power to install Super SU
The installation will perform automatically and the device will reboot twice.
First reboot will take longer. Please be patient. After the second reboot you will have SuperSU and root.
Downsides/bugs:
Knox will be tripped the second you flash a custom recovery (Warranty void: 1 - non reversibile)
(That means that you will lose the warranty for your device and that can not be changed)
(Perhaps that's why I personally can't invest more than $300 in a Samsung cellphone ever)
You won't be able to use Knox-related functions including Secure Folder ever again
Because of a SuperSU bug you won't be able to use Smart View (Miracast, project the screen to smart TV) unless you make an edit as follows:
Lewdog45 said:
Use a file browser such as Root Browser and go to the root of your device then locate the "System" folder and find build.prop and edit it with any application that can edit it and find the bottom line, right at the edge of the bottom line you need to press enter twice and then paste this:
wlan.wfd.hdcp=disable
And then save it and reboot your device.
Click to expand...
Click to collapse
Special thanks to: ashyx for compiling and updating TWRP recovery for SM-A320F and to XN Logos for providing compatible CWM recovery with SM-A320F.
Please feel free to post your attempts on rooting this device and the results. If other methods will show-up I will include them up here.
jnflos said:
Up to this point there is no success in rooting the Galaxy A3 2017 device.
This device is more reasonable to buy as it is small and elegant at a decent price.
Unfortunately there is no sign of working root method for the device.
Please feel free to update this topic with your attempts on rooting this device, and if success will strike, it will float up here for everyone to see.
Click to expand...
Click to collapse
+1
Thanks to developpers
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Here
I tried this morning without succes
copernic75 said:
I tried this morning without succes
Click to expand...
Click to collapse
Why didn't it work? Any errors in Odin?
No error in odin.
When i tried To reboot in revovery mode i don't have access to cmw .. just Android error message + Knox error
XN Logos said:
News good, this one is Working , root cwm for galaxy A3 2017 Sm-A320F,
hit a Thanks if i helped you,
Click to expand...
Click to collapse
Thanks! I will test this on my Galaxy SM-A320FL (single sim) to see...
Root was successful! I will update the first post with the mini tutorial and the files needed
REMOVED
I have indeed a a320-FL french model... Exynos inside.
What do you suggest?
jnflos said:
Root was successful! I will update the first post with the mini tutorial and the files needed
Click to expand...
Click to collapse
This cwm worked for Exynos?
tys0n said:
This cwm worked for Exynos?
Click to expand...
Click to collapse
Yes it worked. Please follow the tutorial that I wrote on the first post.
jnflos said:
Yes it worked. Please follow the tutorial that I wrote on the first post.
Click to expand...
Click to collapse
Ok good then I will remove my earlier post. I don't have the device so I can't try it.
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
copernic75 said:
I tried again this morning with success!
I can have access to recovery but not to sd card (internal or no)... so I can't root the device.
Any idea?
Click to expand...
Click to collapse
Format the SD card on your PC using FAT32 option (use an USB adapter).
Copy the zip on the card, Insert it into the phone and reboot into recovery to test.
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
copernic75 said:
Yes... that's what I did. I found the solution into Google.
Thanks anyway for your help.
Do you think that it will be possible to install TWRP instead of CWM in recovery?
Click to expand...
Click to collapse
Yes. You can flash twrp in cwm and reboot to recovery. Twrp will be there instead.
wich version to choose?
Sorry. There's no twrp for a320 yet, but in general it's working fine to flash new recovery with existing one.
Hey guys, I will receive my a3 2017 soon and I was wondering if it would be preferable to root it now than waiting for the update to Nougat and re-root it then... Any idea when the update will be available for this phone? I was also wondering if I should use a specific brand or type of micro sd card with this phone?
Thanks