CUSTOM BOOT LOGO PACK FOR OnePlus3T
! Boot Logos from this thread are only for OnePlus3T !
For OP2 -> https://forum.xda-developers.com/oneplus-2/themes-apps/mod-custom-boot-logo-pack-op2-t3523836
For OP3 -> https://forum.xda-developers.com/oneplus-3/themes/mod-custom-boot-logo-pack-op3-t3525143
It would be amazing if anyone wants to share these somewhere else, but it is my sincere request to please give the author the credits for the same as it has really taken a lot of time in no only developing the flashable zips, but as well as on editing the photos. It just takes a second to give credits and it will also make me happy
Click to expand...
Click to collapse
Boot Logo ≠ Boot Animation
Boot Logo is NOT the Boot Animation. These are two different things. Boot Logo is the splash screen we see before the boot animation.
FEATURES
> Modern Material Design
> Crafted From Scratch
> High Quality
> Possible Smallest Size
INSTRUCTIONS
> Flash the zip file using a custom recovery (TWRP, CWM, Hybrid).
COMPATIBILITY
> Compatible with any ROM/Kernel.
REVERT
> Flash attached 'OP3T Default.zip' to revert to original.
Note: Preview image resolution is reduced for a comfort viewing (original resolution = 1080x1920).
GOT = Game Of Thrones, POTC = Pirates Of The Caribbean
1. OP3T Default
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. OP3T GOT (1)
3. OP3T GOT (2)
4. OP3T GOT (3)
5. OP3T GOT (4)
6. OP3T GOT (5)
7. OP3T GOT (6)
8. OP3T MrRobot (1)
9. OP3T MrRobot (2)
10. OP3T MrRobot (3)
11. OP3T Sherlock (1)
12. OP3T Sherlock (2)
13. OP3T POTC (1)
14. OP3T POTC (2)
15. OP3T Breaking Bad (1)
16. OP3T Breaking Bad (2)
17. OP3T Batman (1)
18. OP3T Batman (2)
19. OP3T Star Wars (1)
20. OP3T Star Wars (2)
21. OP3T Star Wars (3)
22. OP3T Star Wars (4)
23. OP3T Captain America (1)
24. OP3T Captain America (2)
25. OP3T Iron Man (1)
26. OP3T Iron Man (2)
27. OP3T The Flash (1)
28. OP3T Christmas (1)
29. OP3T Christmas (2)
30. OP3T Christmas (3)
DOWNLOADS
There're many more logos(check posts) aside from the ones above
--- With 'ONEPLUS3T' and 'NEVER SETTLE' texts (like preview images) ---
Download the whole pack (.rar) - Here
Download individual (.zip) files - Here
--- Without 'ONEPLUS3T' and 'NEVER SETTLE' texts (picture & quote only) ---
Download the whole pack (.rar) - Here
Download individual (.zip) files - Here
Auto Change Boot Logo - Script (Expert only)
For those who want to change boot logo in every boot,
I've made a script that'll randomly select a .zip file in "/sdcard/bootlogo/" directory & copy it to LOGO partition. You can download the script from attachments(remove .txt).
Code:
#!/system/bin/sh
# Custom Boot Logo Random change script by B!Gguy
dir=(/mnt/sdcard/bootlogo/*) && mkdir -p /mnt/sdcard/bootlogo/tmp && tmp=(/mnt/sdcard/bootlogo/tmp)
unzip -o "${dir[RANDOM % ${#dir[@]}]}" logo.bin -d $tmp && dd if=$tmp/logo.bin of=/dev/block/bootdevice/by-name/LOGO
You can use it as an init.d script. Or use an automation app like tasker/macrodroid to run the script anytime you want.
Do not put any other .zip files in that directory.
Use this script at your own risk.
Please DO NOT post your images to make boot logos.
However feel free to post your favorite Movies, TV-Shows & I'll make a Logo when I'm free.! Enjoy Your New Boot Logo !
press Thanks! if I helped
Credits : @makers_mark for Splash Screen Image Injector.
Thanks : @Jo_Jo_2000 for testing + Original logo.bin.
Disclaimer : I will not be held responsible for any damage caused by using these zip files. Flash at your own risk.
Does any of this replace the ugly "5 seconds message" of unlocked boot loader?
Really thanks for the nice and great work.
Any plans on make some cool Boot Animations? Just asking
EDIT: I can´t hit more thanks today, I give it to you later.
h4rl4n said:
Does any of this replace the ugly "5 seconds message" of unlocked boot loader?
Click to expand...
Click to collapse
No. Just the splash screen.
Istvan_86 said:
Really thanks for the nice and great work.
Any plans on make some cool Boot Animations? Just asking
EDIT: I can´t hit more thanks today, I give it to you later.
Click to expand...
Click to collapse
Busy days ahead. But I'll try to make some bootanimations.
B!Gguy said:
No. Just the splash screen.
Click to expand...
Click to collapse
Any chance to edit that awful screen for what you know?
h4rl4n said:
Any chance to edit that awful screen for what you know?
Click to expand...
Click to collapse
No one's found a way(yet). Check this thread -> https://forum.xda-developers.com/oneplus-3t/help/request-remove-bootloader-unlocked-t3510806
Great! When you have time could you make one of Rick and Morty or Daredevil?
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Help
How can I make my own custom boot logo?
Please can someone help me with it?
Arturrior said:
Great! When you have time could you make one of Rick and Morty or Daredevil?
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
Click to expand...
Click to collapse
Here.
You are AMAZING!
Enviado desde mi ONEPLUS A3000 mediante Tapatalk
NielsvdS said:
How can I make my own custom boot logo?
Please can someone help me with it?
Click to expand...
Click to collapse
makers_mark's Splash Screen Image Injector doesn't support 3T yet. I had to compile it specially for 3T. Check the official thread for usage examples of splash screen image injector.
Here -> https://forum.xda-developers.com/oneplus-3/themes/mod-splash-screen-image-injector-t3441999
B!Gguy said:
Here.
Click to expand...
Click to collapse
Loving it!!!!
game request allowed? if yes i need one for AION
thanks in advanced
Game request? Good idea! Can you create a World of Tanks boot animation? This would be really nice!
NielsvdS said:
How can I make my own custom boot logo?
Please can someone help me with it?
Click to expand...
Click to collapse
I ported it to the 1+3T, see this thread here:
https://forum.xda-developers.com/oneplus-3t/themes/change-oem-splash-screen-t3516818
---------- Post added at 12:14 AM ---------- Previous post was at 12:13 AM ----------
B!Gguy said:
makers_mark's Splash Screen Image Injector doesn't support 3T yet. I had to compile it specially for 3T. Check the official thread for usage examples of splash screen image injector.
Here -> https://forum.xda-developers.com/oneplus-3/themes/mod-splash-screen-image-injector-t3441999
Click to expand...
Click to collapse
no ckeck here: https://forum.xda-developers.com/oneplus-3t/themes/change-oem-splash-screen-t3516818
cavalier3003 said:
game request allowed? if yes i need one for AION
thanks in advanced
Click to expand...
Click to collapse
Here.
Crazy32 said:
Game request? Good idea! Can you create a World of Tanks boot animation? This would be really nice!
Click to expand...
Click to collapse
Here. BTW Boot Logo ≠ Boot Animation
Wow man, great work on these!
Maybe you could whip up one or two nice boot logos involving the DedSec hacker group from WatchDogs1/2? The art style is neat and there are TONS of images for DedSec on the net.
Hi @B!Gguy
Thank you so much for this wonderful work. Really amazing.
You will have a little desire and suggestion. Evaluating delirious.
Batman Dark Knight logo
Batman Dark Knight Joker character (a drawing similar to GOT characters)
Thank you
Related
It's been a while since I have made one of these - back during the 1st gen MyTouch was hopping.
I made this bootscreen from scratch with the intention of sharing it out with you all and ran into a snag with the animation not appearing. Thanks to a member of our boards, this issue has been worked out and now I can finally toss this out to you all. I added the "(s)" to the title since I hope to throw a few more out there as well. I also have a "MoPho" boot coming soon that I will include in this thread as well.
Special thanks go out to dased14 for his help in getting things resolved.
So here we go....
This should go without saying, but in order to use this:
Download the zip file for the animation you like.
Rename zip file to "bootanimation.zip", if needed
Place zip on phone
Using Root Explorer, Estrongs, etc. Move file to /System/Media/
Reboot and enjoy
** You MUST be rooted **
As with all other contributions. If you like it - Mash the Thanks button.
Boot Particle Animation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More Boot Animations
Here is a simple "MOPHO" loop, utilizing the Motorola font and colors. Named mopho_boot.zip
This is an energy wipe, revealing "Powered by Android". Named pba_energy.zip
This is another version of the energy wipe, revealing "MOPHO" >>> "Powered by Android". Named mopho_pba.zip
per request by twospirits
Great job....already posted this in other thread but thought I'd give you props here too.
Sent from my MB855 using xda premium
Thank you. More will come this week, hopefully.
Sent from my MB855 using Tapatalk
Works perfectly, gotta love root explorer
Sent from my MB855 using XDA App
More boot screens added. Njoy!
bootanimation.zip
Hello. Noob question..
When i try to move bootanimation.zip to /System/Media/ using root explorer, i get a the message cant move system file read only. I am rooted, unlocked , using Alien rom. How can i resolve this? Tried searching but cant find anything.
Thank you
Sorry for post, i figured it out.. thx
Great boot animations! Keep 'em coming!
Thanks a ton! These are great.
charlie2900 said:
Hello. Noob question..
When i try to move bootanimation.zip to /System/Media/ using root explorer, i get a the message cant move system file read only. I am rooted, unlocked , using Alien rom. How can i resolve this? Tried searching but cant find anything.
Thank you
Sorry for post, i figured it out.. thx
Click to expand...
Click to collapse
Top right of screen, should read mount r/w. Hit the button and it will say mount r/o..should work then
Sent from my MB855 using xda premium
pIxiLatEd said:
Boot Particle Animation
Click to expand...
Click to collapse
pIxiLatEd said:
Here is a simple "MOPHO" loop, utilizing the Motorola font and colors. Named mopho_boot.zip
This is an energy wipe, revealing "Powered by Android". Named pba_energy.zip
Click to expand...
Click to collapse
Have you had a chance to also add sound to the custom bootanimation? If so, could you post examples of where the sound file (e.g. file name format and file extension type) we would need to put in the /system/media folder or where it needs to be?
I tried to add the letter "s" following each line of code and have a android_audio.mp3 file in the /system/media file but the animation works without sound.
For example, I have something like the following in the desc.txt:
540 960 15
p 1 15 Part0 s
p 1 0 Part1 s
p 1 0 Part2 s
Is this correct?
Thanks,
GP
GPhoenix said:
Have you had a chance to also add sound to the custom bootanimation? If so, could you post examples of where the sound file (e.g. file name format and file extension type) we would need to put in the /system/media folder or where it needs to be?
I tried to add the letter "s" following each line of code and have a android_audio.mp3 file in the /system/media file but the animation works without sound.
For example, I have something like the following in the desc.txt:
540 960 15
p 1 15 Part0 s
p 1 0 Part1 s
p 1 0 Part2 s
Is this correct?
Thanks,
GP
Click to expand...
Click to collapse
You have to have the sound file in the system/media/audio/notifications folder and the desc it should look kinda like this
540 960 20 < example
p 1 0 part0 < example
s nameofsound.mp3 < put this where you want the audio to start <EXAMPLE
p 0 0 part1 <example
dased14 said:
You have to have the sound file in the system/media/audio/notifications folder and the desc it should look kinda like this
540 960 20 < example
p 1 0 part0 < example
s nameofsound.mp3 < put this where you want the audio to start <EXAMPLE
p 0 0 part1 <example
Click to expand...
Click to collapse
Thanks for answering this for me - I have been job hunting/interviewing these past few days so I haven't had a chance to check on this thread.
pIxiLatEd said:
Thanks for answering this for me - I have been job hunting/interviewing these past few days so I haven't had a chance to check on this thread.
Click to expand...
Click to collapse
never a problem to lend a hand, good luck on the job hunting
pIxiLatEd said:
Here is a simple "MOPHO" loop, utilizing the Motorola font and colors. Named mopho_boot.zip
This is an energy wipe, revealing "Powered by Android". Named pba_energy.zip
Click to expand...
Click to collapse
It would be awesome if these two would be combined into one.
I'm also liking the boot particle one too.
Very nice work.
twospirits said:
It would be awesome if these two would be combined into one.
I'm also liking the boot particle one too.
Very nice work.
Click to expand...
Click to collapse
here you go try this
(remove from the named zip and place the bootanimation zip where it goes and rename if need be)
How about I have the same green smoke/wipe reveal "MoPho" then wipe again to reveal the "Powered by Android" bit? Then it will look consistent.
Not sure what this weekend holds for me, but I will make that and have it posted by sometime on Monday.
This past week has had me busy interviewing for work, but I'll have some free time coming soon to make a few more. I'll do the one mentioned above first.
Sent from my MB855 using Tapatalk
dased14 said:
here you go try this
(remove from the named zip and place the bootanimation zip where it goes and rename if need be)
Click to expand...
Click to collapse
thanks
pIxiLatEd said:
How about I have the same green smoke/wipe reveal "MoPho" then wipe again to reveal the "Powered by Android" bit? Then it will look consistent.
Not sure what this weekend holds for me, but I will make that and have it posted by sometime on Monday.
This past week has had me busy interviewing for work, but I'll have some free time coming soon to make a few more. I'll do the one mentioned above first.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
awesome
TS
pIxiLatEd said:
How about I have the same green smoke/wipe reveal "MoPho" then wipe again to reveal the "Powered by Android" bit? Then it will look consistent.
Click to expand...
Click to collapse
twospirits said:
thanks
awesome
Click to expand...
Click to collapse
Your wish is granted. Long live Jambi
This thread will show you how to do a couple things.
a) Install a custom boot animation.
b) Randomize your boot animation so each time you reboot, you get a different boot animation (only available with pro version of the app I use).
I'll be updating the thread every few days with new animations until I get a pretty good library. If I'm really super motivated, I might accept boot animation requests. Otherwise, all you need is the boot animation factory linked at the bottom of this thread.
REQUIREMENTS:
-You need to be rooted.
-You need an unlocked bootloader (only if AT&T or Verizon).
-You need a kernel that supports custom boot animation (Faux, Ktoonsez, any AOSP kernel - I'm currently using SlimBean 5.6).
-You *might need to have an AOSP ROM. I have not tried stock rooted TouchWiz yet.
Okay, here's how you do custom boot animations!!!
1) Install ROM Toolbox Lite (consider upgrading to the pro version).
https://play.google.com/store/apps/...wyLDEsImNvbS5qcnVtbXkubGliZXJ0eS50b29sYm94Il0.
*Note, there are other ways to install boot animations, but those methods are not supported in this thread.
2) Copy the boot animation file(s) to your internal or external SD card. It doesn't matter which. Nor does it matter what folder you put them into.
3) Open ROM Toolbox Lite:
4) Close out of the disclaimer:
5) From the main menu, just swipe your finger to scroll to the right:
6) Now you're at the Interface tab. Click on Boot Animations:
7) You can click on "later" to not upgrade. But I do recommend upgrading. This is a VERY cool app:
8) Click "OK" to the disclaimer:
9) From the "Server" tab, you can download boot animations. But you don't want to, because none of them are 1080x1920 and will look "small" on your screen:
10) Instead, swipe to the right so you an view the "Randomize" tab. Read the info if you like:
11) Now swipe to the left to the "Local" tab. And navigate to the folder where you stored your boot animations that you have downloaded from this thread:
INSTALLING A SINGLE BOOT ANIMATION FROM THE FREE VERSION OF ROM TOOLBOX:
1) Single-click on any boot animation you see in this folder:
2) Click on "Install".
3) Reboot phone and on the first (OR SECOND) reboot, you should see your boot animation and it should fill the 1080x1920 screen.
INSTALLING RANDOM BOOT ANIMATIONS IF YOU UPGRADED TO THE PRO VERSION OF ROM TOOLBOX:
1) At the "Randomize" tab, move the sider to the "On" position (top right of screen):
2) Swipe left to the "Local" tab:
3) Single-click a boot animation and select the "Add to randomizer" option (repeat for each boot animation you want):
4) If you're on the free version of ROM Toolbox, you'll be prompted to upgrade. Select either "Unlock boot randomizer" or "ROM Toolbox Pro". The Pro version is more expensive, but it unlocks every option the app has. And there are lots of cool options. Choice is up to you:
5) Since I already paid for the pro version, I installed that:
6) Now click on "open":
7) Go through the steps again and grant Root Permissions when prompted (your Superuser request may be different looking than mine):
8) Ignore the disclaimer:
9) When you finish adding boot animations to the randomizer, your "Randomize" tab will look similar to this. Now you're ready to reboot over and over and over and enjoy all your new boot animations!
Thank you to JaeKar99 for creating or sourcing all the boot animations that I modified to work in 1080x1920 resolution for our Galaxy S4 phones.
http://rootzwiki.com/topic/12938-boot-animations-for-galaxy-nexus-updated-122512/
Thank you to despotovski01 for creating Boot Animation Factory.
http://forum.xda-developers.com/showthread.php?t=1678540
Thank you to jsho31 on XDA for pointing me to ROM Toolbox (which I already had but didn't realize it had the boot animation randomizer - which is awesome!)
--------------------------
BluePlazmall:
http://d-h.st/oEu
CrystalMachineall:
http://d-h.st/gol
Galaxus:
http://d-h.st/Sqc
MachineAzul:
http://d-h.st/kRQ
MBokey:
http://d-h.st/kiY
Nexus_Stock:
http://d-h.st/rZL
Speedo:
http://d-h.st/b59
Spyro:
http://d-h.st/HBl
WarpVortexr:
http://d-h.st/Oz5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ddrfsdsdfds
Download links updated..
More...
Android Heat
http://www.mediafire.com/?cp512ei829wju9u
Green Apple
http://www.mediafire.com/?55810g3l1sfu5gu
AOKP Heat
http://www.mediafire.com/?vrxri2rf322tj52
Whirlpool Android
http://www.mediafire.com/?nsleip6kbso1im3
AOKP
http://www.mediafire.com/?axcbae0we6686a5
GearDroid
http://www.mediafire.com/?u1ldf7bqt3ekihh
Jolly Roger
http://www.mediafire.com/?lsrg1i3fqy6ucza
http://i1230.photobucket.com/albums/ee496/JaeKar99/J-RogerII.gif
Tardis
http://www.mediafire.com/?nv9yzsr1d3l0vsr
Blue Crumble Android
http://www.mediafire.com/?0jmw262qrx78fay
Stainless
http://www.mediafire.com/download/p4076wdvvnnod4n/Stainless.zip
SciFiDroid
http://www.mediafire.com/download/ddqc68t3gw6kj58/SciFiDroid.zip
This was posted in another thread...
fgr said:
Not working for you?
Finally found the solution in a thread by anbech, go here: http://forum.xda-developers.com/showthread.php?t=1897969
Use the CWM_CustomBootanimation_421_Enable.zip. It's for the S3, but works fine on the S4.
Just because the kernel supports it doesn't mean the system does. This flashes the file "bootanimation" to the /system/bin folder. That file is already there, so I made a copy of the existing one before overwriting it with this (just in case).
I'm not using ROM Toolbox, I just copy my animation (bootanimation.zip) to the /system/media folder since I don't change it often, but it should work.
The link above also has a good tutorial on making boot animations.
By the way, I'm using agat's kernel.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=41986187&postcount=16
The images are all broken
white.noise said:
The images are all broken
Click to expand...
Click to collapse
The images are working fine on my PC as of today. I have a question. If I install this, will it replace Samsung's display boot animation, or the ATT symbol with the globe showing?
ronj1986 said:
The images are working fine on my PC as of today. I have a question. If I install this, will it replace Samsung's display boot animation, or the ATT symbol with the globe showing?
Click to expand...
Click to collapse
Must have them all cached from a previous visit because all I get is a photobucket icon telling me it reached its bandwidth limit.
crash822 said:
Must have them all cached from a previous visit because all I get is a photobucket icon telling me it reached its bandwidth limit.
Click to expand...
Click to collapse
Me as well
Lookitfast said:
Me as well
Click to expand...
Click to collapse
http://s1061.photobucket.com/user/czeddie71/library/BOOT_ANIMATION_1080P_JELLYBEAN?sort=3&page=1
This page gives you small samples bypassing photobucket lock out.
This will not work on stock root ?
Thanks .
sam340 said:
This will not work on stock root ?
Thanks .
Click to expand...
Click to collapse
I think the stock kernel will need to be modified to allow?
Flash and find out!
Sent from my SGH-I337M using xda premium
I am on Goldeneye, followed your instructions, and it does not work. I still have the SAMSUNG boot animation. Is it not possible to manually replace the image files or make flash files out of there? Just wondering cause I would like a new animation but it is not working for me .
Edit: I believe this is cause silly Samsung uses QMG, which is proprietary, for their boot animations so unless we can figure a better way to create full HD boot animations without have to use Samsung Theme Designer I guess those using stock based wont have any others. If anyone find a successful alternative let me know. I read up on one for the Note 2 but it didnt work on my phone.
Tylor
THREAD INDEX:
I. INTRODUCTION
II. REQUIREMENTS
III. INSTALLATION GUIDE (THROUGH RECOVERY)
IV. BOOTANIMATION.ZIP INSTALLATION GUIDE
Second Post. DOWNLOADS
#_____________________________#
I. Introduction
As you know Samsung Stock Roms uses a special .qmg for the bootanimation but the procedure that converts all the bootanimation.zip to .qmg ones doesn't give good results getting a low quality bootanimation.
Android uses a binary called bootanimation to run the bootanimations, and it is situated inside the system/bin folder, Samsung has modified this binary in order to get it working with .qmg files.
-Why don't we restore the native bootanimation.zip support?
II. Requirements
This mod has been tested on many samsung devicesl!
These are all the requirements required to add the spport for the Native Android Bootanimations:
Samsung device
Rooted Smartphone
Recovery Installed (TWRP or CWM)
II. Installation guide (THROUGH RECOVERY)
The installation procedure is really easy because i've made a simple zip that makes everything accessible!
Perfrom the following steps:
Download the proper zip according to your android version from the second post
Reboot your smartphone to the recovery and install the downloaded zip
Now you have the Native Android bootanimation.zip support
Now, once you reboot your smartphone, you will see the stock Android Bootanimation.
Did you get a softbrick?
-My zip automatically creates a zip that allows to restore the previous bootanimation binary. Reboot to recovery and install the StockBootanimationRestorer.zip inside the /vr-theme folder and report your device, please
III. Bootanimation.zip installation guide
Now as you have the bootanimation.zip support you have to look for a bootanimation style repository, and inside XDA i've found this useful thread:
[BootAnimation & Shutdownanimation] MASSIVE G3 Collection <<Over 66+>> 10/9/14 -> (Thanks @KachowPow)
Easy procedure to install bootanimations.zip :
Download the style you like from the thread posted above or alternative sources
Download the Flashable_Bootanimation.zip schema and extract it
Open the /system/media folder and put the bootanimation.zip that you have downloaded (Do not extract the animation.zip)
Compress all the folders (META-INF & /system) in zip without any compression or other options
Copy the compressed zip inside your phone memory and begin with the installation procedure via Recovery
Reboot and ENJOY!
:good: I HOPE YOU'VE LIKED MY THREAD, IF SO HIT THE THANKS BUTTON :good:
-
2nd Post. Download links
-XDA Attachements:
Farewell QMG!!!
Top work Giuseppe....... I'm teaching you well ??
Howdy Giu[emoji12] nice work. Bootloops will be fun from now on.
Sent from my SM-G925F
Any photos here please. I seem not sure of what exactly to expect.
dmokiring said:
Any photos here please. I seem not sure of what exactly to expect.
Click to expand...
Click to collapse
On your Note 4 by default you have the bootanimation with Fireworks, and if you wanna install custom bootanimations you have to create them (in .qmg) losing a lot of quality. With this guide now you can install all the bootanimations you want.
Follow the guide and then choose the bootanimation you like from here Bootanimations 1440 x 2560 repository by KachowPow @ XDA
Examples downloadable on the thread posted above:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Work like a charm!! Thx man!
Bart3n said:
Work like a charm!! Thx man!
Click to expand...
Click to collapse
You are welcome!
Could you mention your device model, please ?
CoolJoseph96 said:
You are welcome!
Could you mention your device model, please ?
Click to expand...
Click to collapse
Oh sorry, mine is N910F.. love the quality of the animation!!!
Bart3n said:
Oh sorry, mine is N910F.. love the quality of the animation!!!
Click to expand...
Click to collapse
Thanks!
:good: I HOPE YOU'VE LIKED MY THREAD, IF SO HIT THE THANKS BUTTON :good:
Click to expand...
Click to collapse
Took a chance with my T700 - works quite well. Sometimes have to boot twice (hard reset). But thanks.
THREAD UPDATED - ALMOST ALL SAMSUNG DEVICES SUPPORT AND ANDROID OS
Well, lately users do not read long threads! :')
Anyway i made an update on the topic adding the support for almost all samsung devices and android os.
Lemme know your device model if it has worked or not!
After flashing the zip for KitKat on my g355h, the splash screen was shown up (as always) but it continued up until the home screen.....no boot animation. Also there is a pre-installed bootanimation.zip in /system/media/here, that came with the stock firmware......
Hey, does this support Galaxy J5? Also, nice work dude, i really appreciate your work.
EDIT:
It works for Galaxy J5. just installed a cyanogenmod bootanimation, works fine. Thanks Jertlok for this amazing mod!
Jertlok said:
2nd Post. Download links
-XDA Attachements:
Click to expand...
Click to collapse
Thanks a lot. It works nice. But when I create an boot animation it would not work. But all downloaded zip boot animation works fine on my Samsung Galaxy core Prime g360h. Can You explain where I am doing error during creating a zip boot animation. Here the attached file
---------- Post added at 11:35 AM ---------- Previous post was at 11:33 AM ----------
I can not attach file
---------- Post added at 11:41 AM ---------- Previous post was at 11:35 AM ----------
Here the link. All are correct but it it would not work on my phone. Although all downloaded zip boot animation works charm
https://drive.google.com/file/d/0B3-NCstEO255RmNISXZwa1ducFk/view?usp=docslist_api
Downloaded bootanimation.zip, placed it into media, made a zip, copied it over to my phone and if i wanna flash it say, that it can not find update binary in the meta inf folder; i looked it up in the folder and it was there, seemed to be broken, and before all this i installed the mm native bootanimation supprt(per given zip)
any suggestions?
---------- Post added at 05:35 PM ---------- Previous post was at 05:34 PM ----------
Bogimaster said:
Downloaded bootanimation.zip, placed it into media, made a zip, copied it over to my phone and if i wanna flash it say, that it can not find update binary in the meta inf folder; i looked it up in the folder and it was there, seemed to be broken, and before all this i installed the mm native bootanimation supprt(per given zip)
any suggestions?
Click to expand...
Click to collapse
when i tried it with the MM flasshable zip(for example), it worked
---------- Post added at 06:16 PM ---------- Previous post was at 05:35 PM ----------
i got it work by replacing the files in system/media, its okay
secondly, is there a way to change the boot splash screen and/or the shutdownanimation??
probably this only works on aosp roms...
I have a Note 3 with a Note 7 port, so I flashed the MM zip.
Does not work unfortunately, stays in the initial Samsung Galaxy Note 3 screen and jumps straight to lock screen (it skips boot animation entirely)
I dunno if I should blame this on the bootanimation itself or that I am using a custom ROM
Any suggestions?
Does this work on stock firmware with root and custom recovery?
Works perfectly on Note3neo (sm-n7505), is there any way to also change the shutdown animation ?
TheCharlie17 said:
Works perfectly on Note3neo (sm-n7505), is there any way to also change the shutdown animation ?
Click to expand...
Click to collapse
+1
Willy Susilo Presents:
Redesigned Galaxy S5 splash screens for Galaxy S5 Exynos (SM-G900H) [k3gxx]
End of Life Thread Support (EOL) [04 Jul 2017]
So, no more updates and no more new designs for this thread. If you have new splash screen design, use it personally or share it to your new thread and give me credit or post the design to this thread. But, don't worry. You still can download my splash screen design zips and post comments on this thread. I will reply you when I have free time. Thanks for supporting my thread :good:
Information:1. Special thanks to @amtra for his flashable zip file
2. I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE!
3. For S5 Exynos SM-G900H only
4. I have tested the zips on my Galaxy S5 Exynos (SM-G900H) before posting them to this thread
5. If you want to take these designs please credit me and PM me
6. IF YOU WANT TO DEVELOP THE SPLASH SCREEN TO FLASHABLE ZIP OR PORT TO ANNOTHER DEVICES AND TAKE THIS DESIGNED LOGO SPLASH SCREEN, PLEASE CREDIT ME BECAUSE IT IS MY HARD WORK. I NEED 3 DAYS TO MAKE IT LOOKS PERFECT. IT IS ORIGINAL 100% MADE BY ME
How to use:1. Boot to recovery (custom recovery)
2. Select the zip (attachment bellow)
3. Flash and reboot
4. BOOM!
5. Download links:
Google Drive
Media Fire
Update Log:1. UPDATE (2 Oct 2016) I have built Galaxy S7 Edge splash screen for Galaxy S5 Exynos
2. UPDATE (8 Dec 2016) Added S8 Splash screen (Hey our S5 has become futuristic ) and added The white version of splash screens
3. UPDATE (5 Jan 2017) Im going to add support for another Exynos devices so I need tester
4. UPDATE (1 Feb 2017) I will support S5 Exynos and Note 4 Exynos devices only, dont ask me to make it compatible with other devices
5. UPDATE (28-29 Mar 2017) Added new S5 splash screen designs, designed by @abhinav3081
6. UPDATE (17 Apr 2017) Added Google splash screen for S5, designed by @jayantraj
7. 04 July 2017: End of Life thread support (EOL)
Custom your own boot logo?Check this out
Gallery:
1. Stock splash screen
View attachment 3663398
2. Redesigned S5 splash screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Redesigned S5 splash screen (white version)
4. Redesigned S5 splash screen vs S6 stock splash screen comparison
5. S7 Edge splash screen port (black)
6. S7 Edge splash screen port (white)
7. S8 splash screen (black)
8. S8 splash screen (white)
9. S5 splash screen by Abhinav
10. S5 splash screen by Abhinav (2)
11. Google splash screen (black)
12. Google splash screen (white)
If you have interest about computers and IT (software, hardware, etc) you can join my international telegram group -> HERE
Lol cute, I have created this for Toxic but don't know why param.bin don't edits
Can we delete it to boot faster ?
Will this work on locked BL devices like g900a?
Edit: can't get the param.bin to open :/, says invalid tar magic.
Sent from my SAMSUNG-SM-G900A using Tapatalk
BlackMesa123 said:
Lol cute, I have created this for Toxic but don't know why param.bin don't edits
Click to expand...
Click to collapse
Yeah, What's your problem? What happened to you?
Paktunio said:
Can we delete it to boot faster ?
Click to expand...
Click to collapse
Sorry, you can't delete it. You can make your phone boots faster by: changing boot animation to simpler one or make a blank boot animation! (I've made a blank boot animation but it only boots 1 second faster, LOL)
And, Don't install Xposed Framework! It may make your phone boot slower
Rakuu said:
Will this work on locked BL devices like g900a?
Edit: can't get the param.bin to open :/, says invalid tar magic.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
Have you tried any other terminal emulator apps? I think you have to root and unlock you bootloader.
willysusilo said:
Have you tried any other terminal emulator apps? I think you have to root and unlock you bootloader.
Click to expand...
Click to collapse
I tried moving the file to my comp and used the "file" command on it, said it was an executable and tar also refused to open it there. I'm thinking either the mount point is different or its encrypted for us.
Sent from my SAMSUNG-SM-G900A using XDA Labs
willysusilo said:
Yeah, What's your problem? What happened to you?
Click to expand...
Click to collapse
param.bin don't flash, I tried too arter97 zip with script edited but nothing
Hi,
I did step 2 and entered all the codes,went on step 3 and opened the folder in CM's file manager,but param folder is empty,just wondering why can't i see the param.bin in the folder,is it because the commands didn't work or do I have to have another file manager to see the file and open it.
I got error mkdir failed for /sdcard/param, file exists. There is a param.bin file but if i try to open it on my laptop it comes up with param.bin.cpgz and extracting that gives me another param.bin
willysusilo said:
Have you tried any other terminal emulator apps? I think you have to root and unlock you bootloader.
Click to expand...
Click to collapse
Hey... Android Terminal Emulator not work in my 900H device my device is already rooted and Using stock rom but i try to open Android Terminal Emulator giving FC
I cant tar xf /sdcard/param.bin It says "invalid tar magic". Is ur device exynos because i think snapdragon devices dont work
willysusilo said:
Hii
I have designed our new Galaxy S5's splash screen
You can also use this menthod to other Android devices BUT, DO AT YOUR OWN RISK! I'M NOT RESPONSIBLE FOR YOUR ANDROID!
Here's how to change it:
1. Install Android Terminal Emulator app
2. Open the app and type these codes:
su
dd if=/dev/block/mmcblk0p8 of=/mnt/sdcard/param.bin bs=4096
mkdir /sdcard/param cd /sdcard/param tar xf /sdcard/param.bin
Note: if you didn't find it on sd card, change all /mnt/sdcard directories with /storage/emulated/0/
Menthod 2: If you failed xf command, extract param.bin on sd card manually by your self
3. Now, in file explorer open sdcard/param
and replace logo.jpg with your new picture (make sure you have name the picture logo.jpg and the picture has the same resolution with your phone)
4. Then, open terminal emulator app again and type these codes:
su
cp -f /sdcard/logo.jpg /sdcard/param/logo.jpg cp -f /sdcard/warning.jpg /sdcard/param/warning.jpg cp -f /sdcard/download.jpg /sdcard/param/download.jpg rm -f /sdcard/param.bin cd sdcard/param
tar cf - `ls | sort -t.` > /sdcard/param.bin
dd if=/sdcard/param.bin of=/dev/block/mmcblk0p8 bs=4096
If you use /storage/emulated/0/ on step 2 don't forget!
If you use menthod 2, you dont need cp command
5. Reboot and see the changes
Click to expand...
Click to collapse
Bro.. m failed to find this folder... m using root explorar..
scso43 said:
I cant tar xf /sdcard/param.bin It says "invalid tar magic". Is ur device exynos because i think snapdragon devices dont work
Click to expand...
Click to collapse
Faisal_RK said:
Hey... Android Terminal Emulator not work in my 900H device my device is already rooted and Using stock rom but i try to open Android Terminal Emulator giving FC
Click to expand...
Click to collapse
Before I post this thread, I have tried on My SM-G900H and it works! I know that our S5 Exynos is lack of support. If I have more free time, I will try to port CM13 to our S5 Exynos. (I'm not promise)
justinxfan said:
I got error mkdir failed for /sdcard/param, file exists. There is a param.bin file but if i try to open it on my laptop it comes up with param.bin.cpgz and extracting that gives me another param.bin
Click to expand...
Click to collapse
Delete param folder in your sd card and try again
Sorry for unclear instruction
willysusilo said:
Before I post this thread, I have tried on My SM-G900H and it works! I know that our S5 Exynos is lack of support. If I have more free time, I will try to port CM13 to our S5 Exynos. (I'm not promise)
Click to expand...
Click to collapse
Bro... i m also porting a GenNXT deodexed rom.. so plz... can u define it in details..
How to Replace or change ...the new logo.jpg
Plz bro...
I m failed to find a param.bin folder.
After this command i have param.bin but having different size
original=8MB edited=990KB
tar cf - `ls | sort -t.` > /sdcard/param.bin
amtra said:
After this command i have param.bin but having different size
original=8MB edited=990KB
tar cf - `ls | sort -t.` > /sdcard/param.bin
Click to expand...
Click to collapse
Is the image larger? My param.bin was only 512k, obviously the partitions are different for everyone or at least by device model which would explain most people failing.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Rakuu said:
Is the image larger? My param.bin was only 512k, obviously the partitions are different for everyone or at least by device model which would explain most people failing.
Sent from my SAMSUNG-SM-G900A using Tapatalk
Click to expand...
Click to collapse
The extracted param.bin is 8MB, and the extracted param.bin is less than 1MB
Hi guys so i have a Xperia Z5 (E6683) and i made a custom bootanimation for it but everytime i flash it either it would crash the phone or it will just show the logo
Note im running on Lineage 18.1 Android 11 i think this is an issue from my bootanimation file can anyone help me fix this?
Use this bootanimation zip at your own risk tho please help me fix this?
the whole animation is 60 fps 1080x1920 i made it in after effects and premiere pro
Original video down below (ToonOS.zip)
_harley said:
Hi guys so i have a Xperia Z5 (E6683) and i made a custom bootanimation for it but everytime i flash it either it would crash the phone or it will just show the logo
Note im running on Lineage 18.1 Android 11 i think this is an issue from my bootanimation file can anyone help me fix this?
Use this bootanimation zip at your own risk tho please help me fix this?
the whole animation is 60 fps 1080x1920 i made it in after effects and premiere pro
Original video down below (ToonOS.zip)
Click to expand...
Click to collapse
I'll try it later when I have time.
However: I could also install non-working bootanimation.zip files on my LOS 18.1 (but on Xiaomi Mi A2) and didn't encounter any crashes.
DId you really flash it? You normally only have to move it to /system/media.
User699 said:
I'll try it later when I have time.
However: I could also install non-working bootanimation.zip files on my LOS 18.1 (but on Xiaomi Mi A2) and didn't encounter any crashes.
DId you really flash it? You normally only have to move it to /system/media.
Click to expand...
Click to collapse
yeah i did via adb terminal using adb root,remount,shell then removing the main bootanimation then run adb push bootanimation.zip /system/media
sometimes it works it does show the animation then it will crash then bootloop it
sometimes it will boot but with only the sony logo appearing
User699 said:
I'll try it later when I have time.
However: I could also install non-working bootanimation.zip files on my LOS 18.1 (but on Xiaomi Mi A2) and didn't encounter any crashes.
DId you really flash it? You normally only have to move it to /system/media.
Click to expand...
Click to collapse
When I reboot the phone, it displays the animation okay, but then slows down (still during the first loop), halts, and reboots after a few seconds.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
_harley said:
When I reboot the phone, it displays the animation okay, but then slows down (still during the first loop), halts, and reboots after a few seconds.
Click to expand...
Click to collapse
What happens if you do the following:
Code:
prompt_PC:~$ adb shell
prompt:~$ bootanimation
(if you are in your shell, type boot and hit tab-key. I think it was called bootanimation, but maybe it was something similar to that).
User699 said:
What happens if you do the following:
Code:
prompt_PC:~$ adb shell
prompt:~$ bootanimation
(if you are in your shell, type boot and hit tab-key. I think it was called bootanimation, but maybe it was something similar to that).
Click to expand...
Click to collapse
there's no response on terminal i deleted the bootanimation for now i hope you can help me fix this issue thank you!
User699 said:
What happens if you do the following:
Code:
prompt_PC:~$ adb shell
prompt:~$ bootanimation
(if you are in your shell, type boot and hit tab-key. I think it was called bootanimation, but maybe it was something similar to that).
Click to expand...
Click to collapse
@_harley
I don't see your answer here but my email preview says you already answered and said it returns nothing.
Sorry for that, sometimes xda seems to be a bit buggy for me.
I can try your attached boot animimation in about 30 to 60 minutes and will report back what my device does.
If my device reacts strage too, I'll look into it and maybe find a solution (maybe. I just did a few experiments with boot animations which means I'm not that skilled).
User699 said:
@_harley
I don't see your answer here but my email preview says you already answered and said it returns nothing.
Sorry for that, sometimes xda seems to be a bit buggy for me.
I can try your attached boot animimation in about 30 to 60 minutes and will report back what my device does.
If my device reacts strage too, I'll look into it and maybe find a solution (maybe. I just did a few experiments with boot animations which means I'm not that skilled).
Click to expand...
Click to collapse
alright I'll wait thank you!!
oh and yeah i have both the animation and the video attached
_harley said:
there's no response on terminal i deleted the bootanimation for now i hope you can help me fix this issue thank you!View attachment 5286907
Click to expand...
Click to collapse
Well, now it's there. Okay.
Did you enter your password/pin/pattern/... on your device and viewed the screen while executing that command? It should show your bootanimation if the bootanimation.zip is correct.
_harley said:
alright I'll wait thank you!!
oh and yeah i have both the animation and the video attached
Click to expand...
Click to collapse
Sure, you're welcome.
Okay @_harley , I tried it.
Your version didn't even start for me (no bootanimation) so I unpacked it and changed one letter:
1080 1920 60
c 1 0 part0
Click to expand...
Click to collapse
Then I repacked it and it works perfectly now.
I attached it again in case you need it.
User699 said:
Okay @_harley , I tried it.
Your version didn't even start for me (no bootanimation) so I unpacked it and changed one letter:
Then I repacked it and it works perfectly now.
I attached it again in case you need it.
Click to expand...
Click to collapse
Thank you so very Much!!
You're welcome!
User699 said:
Okay @_harley , I tried it.
Your version didn't even start for me (no bootanimation) so I unpacked it and changed one letter:
Then I repacked it and it works perfectly now.
I attached it again in case you need it.
Click to expand...
Click to collapse
oh yeah i forgot to ask you but is it smooth when you try the animation?
mine now works but it's a bit laggy haha
_harley said:
oh yeah i forgot to ask you but is it smooth when you try the animation?
mine now works but it's a bit laggy haha
Click to expand...
Click to collapse
Yes, it was smooth.
Where does is lag? If it seems slow on specific "places" you may need to reduce pictures which look identical (very simillar) in that part.
User699 said:
Yes, it was smooth.
Where does is lag? If it seems slow on specific "places" you may need to reduce pictures which look identical (very simillar) in that part.
Click to expand...
Click to collapse
the whole animation i decreased it to 24 and now it's a bit smooth but still you can notice the lag
_harley said:
the whole animation i decreased it to 24 and now it's a bit smooth but still you can notice the lag
Click to expand...
Click to collapse
Really?
No, on my device it doesn't lag. Maybe it's device specific?
Unfortunately I don't know enough about it to actually have an idea on why this is happening on your device but not on mine.
But I hope you'll solve it!
What you could do, though, is looking at the bootanimation.zip from lineageos – maybe their txt file will give you a hint?