Related
Hey friends, I am very new to the rooting scene. I have a at&t htc m8 and i made the mistake of trying to root the fast and easy way. I followed a guide by a user names Unlocker. I would post the link but am unable to at this current time because i am new here
That has it's readers use hasoon2000's all in one toolkit. Well I think I screwed up in that process. when my phone was off and charging , the screen would briefly flash the TWRP ui with their lock screen. So naturally I freaked out tried my best to unroot the damn thing by following a guide created by the same guy after he got many complaints of issues
Naturally I had problems with this aswell. Now where i'm at, at this current moment is
**tampered** ***unlocked**
I successfully (i think) removed super su and did my best to get back to stock firmware. well I failed at that aswell. I still have TWRP on my phone and managed to get security turned back on.
What I am asking is for any references or maybe even some fresh help on how i can either get my phone back to stock firmware so i can take the OTA updates and be on my merry way or maybe reccomend a custom rom I can use that has the new lolipop software.
Now i was looking to update my TWRP but I am unable to locate an AT&T verison. I see sprint , verizon, and GSM. I feel pretty helpless right now but if i can get some instruction I know I will be able to figure this out.
I'm still really new to this also, but I'll try my best (just take everything I say w/ a grain of salt...):
Krob189 said:
... when my phone was off and charging , the screen would briefly flash the TWRP ui with their lock screen. ...
Click to expand...
Click to collapse
Do you mean that you'd successfully done whatever you were doing and this was happening in normal use? AFAIK it is normal for the the screen to power off during long-running TWRP actions, and power button wakes it up.
Krob189 said:
...
I successfully (i think) removed super su and did my best to get back to stock firmware. well I failed at that aswell. I still have TWRP on my phone and managed to get security turned back on.
Click to expand...
Click to collapse
Which firmware do you have on it now? Do you have ADB installed? If so, it might be helpful if you post the output of the command
Code:
fastboot getvar all
. If not, I think you'll need ADB and fastboot to help recover.
Krob189 said:
...Now i was looking to update my TWRP but I am unable to locate an AT&T verison. I see sprint , verizon, and GSM ...
Click to expand...
Click to collapse
AT&T uses GSM. The GSM version should be correct. Depending on the firmware you have installed, specific versions of twrp may not work. In my case, twrp 2.8.4.0 wouldn't work on AT&T's stock 4.4.2 firmware, but would on the 4.4.4 firmware.
EDIT: Did you make a TWRP backup before attempting these changes? Depending on the state of your firmware, restoring that might be enough to fix things.
AT&T Stock 4.4.4 RUU
This should solve your problem, if you can achieve s-off again:
AT&T Stock 4.4.4 RUU
Krob189 said:
That has it's readers use hasoon2000's all in one toolkit. Well I think I screwed up in that process. when my phone was off and charging , the screen would briefly flash the TWRP ui with their lock screen. So naturally I freaked out tried my best to unroot the damn thing by following a guide created by the same guy after he got many complaints of issues
Click to expand...
Click to collapse
All the panic is for nothing. Its normal for the TWRP screen to appear for a brief moment when the device is powered off, and you connect the charger. At least on older versions of TWPR (and the version installed by Hasoon's toolkit is quite old).
Krob189 said:
Now i was looking to update my TWRP but I am unable to locate an AT&T verison. I see sprint , verizon, and GSM. I feel pretty helpless right now but if i can get some instruction I know I will be able to figure this out.
Click to expand...
Click to collapse
The TWRP version you want is the GSM. All versions of the M8 are essentially the same (and considered "GSM") except for the CDMA (Sprint & Verizon) and dual SIM variants.
---------- Post added at 12:47 PM ---------- Previous post was at 12:46 PM ----------
brasticstack said:
Do you mean that you'd successfully done whatever you were doing and this was happening in normal use? AFAIK it is normal for the the screen to power off during long-running TWRP actions, and power button wakes it up.
Click to expand...
Click to collapse
What the OP is describing was a known bug, and happened when outside of recovery and while the phone was powered off (and while connecting the charger).
Wow thank you for fast responses!
So from my understanding I have a outdated TWRP version. I suppose I need to read up on how to update this and also how to flash a new rom. I only rooted my phone so I could pair up my ps3 controller to my phone so I can play games on it. I regret doing it now to be honest because I have modded my 3ds to play the same games i was using on my phone
I would love to be on the lolipop update that launched yesterday I believe. Should I stick to a rooted rom or just flash a stock version? Can anyone recommend a good lolipop root that has some tweaks for battery life and overall performance?
Krob189 said:
So from my understanding I have a outdated TWRP version. I suppose I need to read up on how to update this and also how to flash a new rom.
Click to expand...
Click to collapse
Just get the latest version of TWRP from their website. As you are asking what version (CDMA vs. GSM) it sounds like you are already getting there.
It sounds like you have the version of TWRP that was installed by the toolkit. That version is many months old. But its a minor bug, anyway. How often do you charge the phone with it powered off, anyway. I also don't think you can do anything in TWRP in this condition (if a security risk is your concern). The TWRP appears for a split second, and that's it.
Krob189 said:
I would love to be on the lolipop update that launched yesterday I believe. Should I stick to a rooted rom or just flash a stock version? Can anyone recommend a good lolipop root that has some tweaks for battery life and overall performance?
Click to expand...
Click to collapse
Lollipop didn't launch for AT&T, its just a long-delayed 4.4.4 update for us. To update to 4.4.4, either return to stock ROM and stock recovery to get the OTA, or relock the bootloader and run the official RUU.
Lollipop (5.0) started to roll out for some Euro CIDs, and has been out for US Dev Edition for a while. But you can't get to Sense Lollipop unless you s-off (or until AT&T releases it).
Hey guys! Unfortunately I bricked my new HTC Desire 626s while fiddling around with xposed for lollipop after successfully rooting the phone and installing cyanogen recovery. I think if I flash the stock rom on the phone through either adb or cyanogen recovery I can unbrick it, but I have been unsuccessful in finding this file on the internet. Would anyone care to give me a link or upload the stock firmware/rom of this phone? It would really help me out, thank you!
You have to make sure the firmware is the same version or newer than the one currently on the phone as well as which carrier or region the phone is from. Without that, can't provide the correct file to download.
es0tericcha0s said:
You have to make sure the firmware is the same version or newer than the one currently on the phone as well as which carrier or region the phone is from. Without that, can't provide the correct file to download.
Click to expand...
Click to collapse
Umm.. Okay so I guess I'll give you my phone's info? WAIT DOES THIS MEAN YOU CAN PROVIDE A DOWNLOAD!? IM SO EXCITED, UH OK HERE
- HTC Desire 626s
- Metro PCS USA
- Current firmware version : 1.06.1550.7
ANYTHING ELSE?? IF YOU CAN GIVE ME THAT DOWNLOAD LINK, MY MOM WONT KILL ME:crying::crying::crying: (she's really pissed :laugh Thank you btw!
Was just thinking about this...if you soft bricked after attempting to install Xposed, and nothing else, you should be able to get out of it by flashing the xposed uninstaller zip. If that does not work, stay tuned to this thread http://forum.xda-developers.com/desire-626/help/htc-desire-626s-root-recovery-t3169169 as there are some others at the end of the thread in a similar predicament. It does not appear that there is an official RUU yet for the Metro version, only the T-Mobile version, and they are not compatible. Just try the uninstaller zip first because that would be the easiest thing to try and should only take a couple of minutes.
es0tericcha0s said:
Was just thinking about this...if you soft bricked after attempting to install Xposed, and nothing else, you should be able to get out of it by flashing the xposed uninstaller zip. If that does not work, stay tuned to this thread http://forum.xda-developers.com/desire-626/help/htc-desire-626s-root-recovery-t3169169 as there are some others at the end of the thread in a similar predicament. It does not appear that there is an official RUU yet for the Metro version, only the T-Mobile version, and they are not compatible. Just try the uninstaller zip first because that would be the easiest thing to try and should only take a couple of minutes.
Click to expand...
Click to collapse
I tried this before my phone got ****ed and it worked:good:! If you can help me dude that'd be great. After uninstalling or changing some stuff in priv-app on my HTC Desire 626s, when I rebooted, it would just stay in a boot loop with the optimizing app message. Any ideas?
What did you uninstall? I would ask for those apps in that thread and use a flashable zip and install via TWRP. You might also try clearing caches and/or resetting the phone again. It DOES take a long time to optimize the apps after wiping stuff as well, so sometimes it is a matter of being patient.
This is why I ALWAYS recommend to freeze apps vs uninstalling. Uninstalling them does not get you any usable space back, so there is no benefit, but it can cause issues if you do need the apps, as you can see...
es0tericcha0s said:
What did you uninstall? I would ask for those apps in that thread and use a flashable zip and install via TWRP. You might also try clearing caches and/or resetting the phone again. It DOES take a long time to optimize the apps after wiping stuff as well, so sometimes it is a matter of being patient.
This is why I ALWAYS recommend to freeze apps vs uninstalling. Uninstalling them does not get you any usable space back, so there is no benefit, but it can cause issues if you do need the apps, as you can see...
Click to expand...
Click to collapse
I believe I uninstalled the dialer and its service in an attempt to replace them with the stock lollipop ones. How do you install TWRP on this phone? My mom has the same phone and its also rooted but hers actually works so I was thinking since TWRP has a nandroid backup setting, I could simply do a nandroid backup on hers and flash it on to mine to see if it will boot up. What do you think? And for the optimizing apps thing, it would finish optimizing, say starting apps, reboot and then optimize again and repeat. Thanks for the help btw, I really hope we can fix this.
You have to unlock the bootloader @ htcdev.com and use fastboot to install TWRP. And yes, that would work, as long as they are on the same software update. Know that when you unlock the bootloader, it will automatically wipe the phone, so make sure she has everything backed up to Google, the PC, etc.
es0tericcha0s said:
You have to unlock the bootloader @ htcdev.com and use fastboot to install TWRP. And yes, that would work, as long as they are on the same software update. Know that when you unlock the bootloader, it will automatically wipe the phone, so make sure she has everything backed up to Google, the PC, etc.
Click to expand...
Click to collapse
Do you have the TWRP recovery file for me to download?
I'm afraid I'm a bit confused... How did you install Xposed and the Uninstaller without a custom recovery? Upon further searching, there doesn't appear to be a version of TWRP for your phone that I could find. Just figured you already had one. You must be on Kit Kat and not Lollipop?
es0tericcha0s said:
I'm afraid I'm a bit confused... How did you install Xposed and the Uninstaller without a custom recovery? Upon further searching, there doesn't appear to be a version of TWRP for your phone that I could find. Just figured you already had one. You must be on Kit Kat and not Lollipop?
Click to expand...
Click to collapse
I installed Cyanogen recovery before flashing Xposed and the uninstaller. I thought you had the TWRP recovery img for my phone which is why I asked. I believe some developers are working on a Clockworkmod recovery for this phone which is basically the same thing as TWRP recovery, right? Anyways I guess I just have to wait until that comes out, but I was wondering if anyone who somehow got a hold of the stock rom could upload it for us to use. It would be really helpful
ClockWorkMod is the recovery that Cyanogen uses. That is able to perform nandroid backups as well.
You have to unlock the bootloader, then if you messed up your stock rom and you've updated it to something newer than what Samsung gives for a stock recoverable rom, you must first use the tmobile vers, let it fail, and then use metropcs vers.
If you messed up recovery or anything it will all go back to stock after flash.
Next just copy superuser zip file to phone, go to download mode and adb flash cyanogen recovery img. Then reboot to recovery, choose to flash update, and find the superuser. zip and flash it, voila.
https://www.mediafire.com/?8o6qtn7hlsec0zj,yqbbzb7divlcvvc
Kitkat, anyone?
Does anybody have a stock KitKat ROM for this device? I'd like to try to bypass the FRP, but am stuck on what must be either a marshmallow or lollipop ROM.
What carrier do you have?
I can send you a backup of the FRP.img for Marshmallow or for lollipop.
You can dd if= flash it to your device and you should be all good.
I am looking for any older roms for these devices too.
Seems like not too many people save the RUU and then HTC only releases the newest.
I got lollipop and marshmallow that's it.
But like i said we can fix the frp partition.
Issue is fixed
BigCountry907 said:
What carrier do you have?
I can send you a backup of the FRP.img for Marshmallow or for lollipop.
You can dd if= flash it to your device and you should be all good.
I am looking for any older roms for these devices too.
Seems like not too many people save the RUU and then HTC only releases the newest.
I got lollipop and marshmallow that's it.
But like i said we can fix the frp partition.
Click to expand...
Click to collapse
I ended up fixing it using some ADB commands as noted in the "Well, I may have found..." thread. It'll be nice to have this phone out of my life. The day I had to spend with it was two days too many.
Hey XDA, I haven't been on here since my Samsung S2 years ago. I picked up a new moto Z for daydream, (amazon 499 special, 64 gb luna grey unlocked, retus software, 650-03). I bought it from the american amazon, and I am in canada. I popped in my Sasktel sim card and it works perfectly.
My questions are:
How do I manually flash nougat?
If I flash to the rogers 45 firmware, will I still be able to use my Sasktel sim?
How long until nougat comes out regardless? Should I just wait?
If I do flash to this "rogers 45 nougat", can I go back to my "vanilla" stock later? ( i just want daydream now, i bought the headset already. then when my area gets nougat, ill flash back to my phones nougat.. or does it make a difference?)
Sorry for the really random questions. I couldn't find the answers to these on the forums or on google. (reddit has been saying just wait, and don't flash)
You can try this thread here: http://forum.xda-developers.com/moto-z/how-to/easy-flash-to-nougat-tutorial-unlocked-t3514245 - I had success flashing the Rogers 45 firmware (am on retca software channel) but for the life of me couldn't get the Nougat update to install. I'm on Telus and had no issues with my SIM card working after I flashed to the Rogers 45. Flashed back to the retca official firmware (http://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837) this morning with no problems.
Another issue I'm running into is that I unlocked it and for the life of me I can't seem to get the phone locked again. Minor issue but that "your phone is unlocked/untrustworthy" message when you boot up is annoying
pixelens said:
...
Another issue I'm running into is that I unlocked it and for the life of me I can't seem to get the phone locked again. Minor issue but that "your phone is unlocked/untrustworthy" message when you boot up is annoying
Click to expand...
Click to collapse
Just flash the patched bootlogo you can find here... (or, better, make one as I liked more and asked for... )
enetec said:
Just flash the patched bootlogo you can find here... (or, better, make one as I liked more and asked for... )
Click to expand...
Click to collapse
Going to start a new thread so as not to hijack this one
I'll try to give you some "sparse" answers...
- Rogers is a "not carrier locked" software so, no problem with any sim... to be honest it hasn't any special at all!
It's preferred only because between the "leaked" software versions it is the only leaked in .45 and not in .17 subversion... and a .45 is needed for Nougat OTA to apply.
If you are already on a .45 I don't think you really need to flash Roger to have the sideload OTA to apply...
- if you have your full software version on pc to flash in case, yes, you can come back from rogers BUT *only* until you are still on MM.
On this phone Nougat OTA updates a LOT of things (bootloader, baseband, perhaps something on GPT too...) and is *NOT* reversible. Or, at least, not in an easy (as safe...) way... Some have poked with it and.... we have had first bricks... (quite hard ones...).
So?
So I would eventually try in another way.
DISCLAIMER: this isn't tested first hand by me. Some other ( @erfanoabdi) in chat with me reported that it worked for him, but I've to warn that as ALL hacking & tweaking operations something could go wrong (read: bootloop & eventually soft bricks... I don't think hard bricks anyway, BUT this only my-own-opinion, ok? )
Said that... my idea is making things simpler. More... many people are reporting issues with some of the upgraded parts on Nougat (wifi, Bluetooth, etc...) AND upgraded bootloader (and GPT?) are main problems if we want to return to MM, so... let's limit the upgrade to only what's really needed...
Steps should be:
- unlock bootloader
- Flash TWRP in fastboot/fastload mode
- take a *FULL* backup of *ALL* partitions by TWRP (yes, system image too!!) and put it in a safe place (no, your phone or microSD is *not* a safe place...)
- download full Nougat retmx firmware (the only N available at moment...)
- go in fastboot/fastload mode and flash *only* boot.img and system.img using mfastload commands
- enter directly in TWRP (don't boot!) and flash patch for unencrypted kernel
- wipe cache, dalvik and *format* data (yes, format, not only wipe it...). WARNING: this will erase all the contents of your internal storage memory, so take a backup before...
- Reboot...
It should boot fine on Nougat... :fingers-crossed:
(and mantaining your ret channel, not changing it to retmx probably...)
After eventually we'll talk about root...
This way it should be ready to return to MM if needed using the same procedure (changing only boot.img and system.img with MM ones...).
Obviously this is a raw description of procedures... it is written considering that you have good knowledge of the matter and you know how to install and use drivers, adb & fastboot commands, TWRP and so on...
For more info or doubts... ask @erfanoabdi :laugh:
enetec said:
I'll try to give you some "sparse" answers...
- Rogers is a "not carrier locked" software so, no problem with any sim... to be honest it hasn't any special at all!
It's preferred only because between the "leaked" software versions it is the only leaked in .45 and not in .17 subversion... and a .45 is needed for Nougat OTA to apply.
If you are already on a .45 I don't think you really need to flash Roger to have the sideload OTA to apply...
- if you have your full software version on pc to flash in case, yes, you can come back from rogers BUT *only* until you are still on MM.
On this phone Nougat OTA updates a LOT of things (bootloader, baseband, perhaps something on GPT too...) and is *NOT* reversible. Or, at least, not in an easy (as safe...) way... Some have poked with it and.... we have had first bricks... (quite hard ones...).
So?
So I would eventually try in another way.
DISCLAIMER: this isn't tested first hand by me. Some other @erfanoabdi) in chat with me reported that it worked for him, but I've to warn that as ALL hacking & tweaking operations something could go wrong (read: bootloop & eventually soft bricks... I don't think hard bricks anyway, BUT this only my-own - opinion, ok? )
Said that... my idea is making things simpler. More... many people are reporting issues with some of the upgraded parts on Nougat (wifi, Bluetooth, etc...) AND upgraded bootloader (and GPT?) are main problems if we want to return to MM, so... limit the upgrade to only what's really needed...
Steps should be:
- unlock bootloader
- Flash TWRP in fastboot/fastload mode
- take a *FULL* backup of *ALL* partitions by TWRP (yes, system image too!!) and put it in a safe place (no, your phone or microSD is *not* a safe place...)
- download full Nougat retmx firmware (the only N available at moment...)
- go in fastboot/fastload mode and flash *only* boot.img and system.img using mfastload commands
- enter directly in TWRP (don't boot!) and flash patch for unencrypted kernel
- wipe cache, dalvik and *format* data (yes, format, not only wipe it...). WARNING: this will erase all the contents of your internal storage memory, so take a backup before...
- Reboot...
It should boot fine on Nougat... :fingers-crossed:
(and mantaining your ret channel, not changing it to retmx probably...)
After eventually we'll talk about root...
This way it should be ready to return to MM if needed using the same procedure (changing only boot.img and system.img with MM ones...).
Obviously this is a raw description of procedures... it is written considering that you have good knowledge of the matter and you know how to install and use drivers, adb & fastboot commands, TWRP and so on...
For more info or doubts... ask @erfanoabdi :laugh:
Click to expand...
Click to collapse
Yes very good tutorial, I really likes to write something like this but I'm not good in English
Thanks again
erfanoabdi said:
...
Thanks again
Click to expand...
Click to collapse
Ahahahaha, this is only "chatting" in not-so-good-English ... :laugh:
Thanx for you *great* development here instead! :highfive:
enetec said:
I'll try to give you some "sparse" answers...
- Rogers is a "not carrier locked" software so, no problem with any sim... to be honest it hasn't any special at all!
It's preferred only because between the "leaked" software versions it is the only leaked in .45 and not in .17 subversion... and a .45 is needed for Nougat OTA to apply.
If you are already on a .45 I don't think you really need to flash Roger to have the sideload OTA to apply...
- if you have your full software version on pc to flash in case, yes, you can come back from rogers BUT *only* until you are still on MM.
On this phone Nougat OTA updates a LOT of things (bootloader, baseband, perhaps something on GPT too...) and is *NOT* reversible. Or, at least, not in an easy (as safe...) way... Some have poked with it and.... we have had first bricks... (quite hard ones...).
So?
So I would eventually try in another way.
DISCLAIMER: this isn't tested first hand by me. Some other ( @erfanoabdi) in chat with me reported that it worked for him, but I've to warn that as ALL hacking & tweaking operations something could go wrong (read: bootloop & eventually soft bricks... I don't think hard bricks anyway, BUT this only my-own-opinion, ok? )
Said that... my idea is making things simpler. More... many people are reporting issues with some of the upgraded parts on Nougat (wifi, Bluetooth, etc...) AND upgraded bootloader (and GPT?) are main problems if we want to return to MM, so... let's limit the upgrade to only what's really needed...
Steps should be:
- unlock bootloader
- Flash TWRP in fastboot/fastload mode
- take a *FULL* backup of *ALL* partitions by TWRP (yes, system image too!!) and put it in a safe place (no, your phone or microSD is *not* a safe place...)
- download full Nougat retmx firmware (the only N available at moment...)
- go in fastboot/fastload mode and flash *only* boot.img and system.img using mfastload commands
- enter directly in TWRP (don't boot!) and flash patch for unencrypted kernel
- wipe cache, dalvik and *format* data (yes, format, not only wipe it...). WARNING: this will erase all the contents of your internal storage memory, so take a backup before...
- Reboot...
It should boot fine on Nougat... :fingers-crossed:
(and mantaining your ret channel, not changing it to retmx probably...)
After eventually we'll talk about root...
This way it should be ready to return to MM if needed using the same procedure (changing only boot.img and system.img with MM ones...).
Obviously this is a raw description of procedures... it is written considering that you have good knowledge of the matter and you know how to install and use drivers, adb & fastboot commands, TWRP and so on...
For more info or doubts... ask @erfanoabdi :laugh:
Click to expand...
Click to collapse
Wow! Thank you for the response! This answered pretty much all of my questions, but also sparked a few more. The Moto Z was a pretty big purchase for me so I am in no hurry to lose functionality. A lot of people are using translators on here, so I'll be simple (sorry if it comes off as blunt or rude, typing with translators in mind)
I want to stay on android 7. Downgrading to 6.0 is not a worry for me.
I want to get future updates from my carrier. (official android/moto updates and security patches. I want to be able to use the "Google Tango" mod, if it comes out)
I want to be able to use the projector mod and daydream.
I do not plan on rooting my phone (maybe later), and I do not want to unlock my bootloader.
Will the retmx nougat be different then the copy of nougat I would get from retus?
Finally, is there any benefit to waiting for the OTA? Or am I getting the exact same copy of nougat on XDA, that I would in three weeks from OTA? I already bought the daydream headset, am I waiting for nothing?
*two more questions I guess*
Do I need a SD card?
do I need to unlock my bootloader to do this upgrade?
( http://forum.xda-developers.com/moto-z/how-to/update-to-7-0-nougat-xt1650-03-retus-t3513095)
(http://forum.xda-developers.com/moto-z/how-to/easy-flash-to-nougat-tutorial-unlocked-t3514245)
Sorry for all the questions. I have looked all over XDA and haven't been able to find an answer (reddit, and google too :/). I am hoping that other people will be able to read this, and have their questions answered as well.
Again, thank you. You guys are really smart.
pixelens said:
You can try this thread here: http://forum.xda-developers.com/moto-z/how-to/easy-flash-to-nougat-tutorial-unlocked-t3514245 - I had success flashing the Rogers 45 firmware (am on retca software channel) but for the life of me couldn't get the Nougat update to install. I'm on Telus and had no issues with my SIM card working after I flashed to the Rogers 45. Flashed back to the retca official firmware (http://forum.xda-developers.com/moto-z/development/moto-z-official-firmware-downloads-t3449837) this morning with no problems.
Another issue I'm running into is that I unlocked it and for the life of me I can't seem to get the phone locked again. Minor issue but that "your phone is unlocked/untrustworthy" message when you boot up is annoying
Click to expand...
Click to collapse
Awesome, so I would probably want to take note of my retus (not retca, because I bought mine from the american amazon, right?). Do I need to unlock my bootloader to get regular android 7? or did you root as well as upgrade?
Thank you for the response.
Porcelainfog said:
Awesome, so I would probably want to take note of my retus (not retca, because I bought mine from the american amazon, right?). Do I need to unlock my bootloader to get regular android 7? or did you root as well as upgrade?
Thank you for the response.
Click to expand...
Click to collapse
Yup, you'll want the retus firmware I would think. I'm not sure if you have to unlock your bootloader, I did only because I was having issues with the Nougat update and thought that might be why but it didn't make a difference. I did get the Nougat update to install this morning though, tried it on another computer (stupid ADB). I did not root though, just unocked my bootloader and did the Rogers flash then the Noughat sideload.
I'd try it without unlocking the bootloader, if you get an error saying "can't read file <###>" when trying to adb sideload the Nougat update, try different ADB drivers or a different computer first before unlocking it. The couple people I know that have chimed in say they're unlocked as well but haven't indicated whether you need to be or not.
Based on your expressed needs... I'll just wait your OTA. Nothing more. It's only a matter of weeks anyway...
Sorry for being a newb and asking here but I'm finding it difficult to get my head around this.
I was originally on MM and upgraded to Nougat on unlocked I international Moto Z.
I then decided to install TWRP, root and try a new ROM. If I want to go back to stock Nougat can't it just be a case of flashing the Nougat update I have download on my computer through ODIN or is it going to be a little more complex than that?
Thanks for any help
pixelens said:
Yup, you'll want the retus firmware I would think. I'm not sure if you have to unlock your bootloader, I did only because I was having issues with the Nougat update and thought that might be why but it didn't make a difference. I did get the Nougat update to install this morning though, tried it on another computer (stupid ADB). I did not root though, just unocked my bootloader and did the Rogers flash then the Noughat sideload.
I'd try it without unlocking the bootloader, if you get an error saying "can't read file <###>" when trying to adb sideload the Nougat update, try different ADB drivers or a different computer first before unlocking it. The couple people I know that have chimed in say they're unlocked as well but haven't indicated whether you need to be or not.
Click to expand...
Click to collapse
Ok, I'll try it without unlocking the bootloader and let you know what happens. Is your new version of nougat working properly (unrooted?)? Is there a difference between the nougat I am going to flash, and the OTA i'll get in a few weeks? (If you say there is no difference, I'll flash it ASAP without unlocking boot loader and let you know. Working daydream, playstore, and moto mods right?)
Again, thank you for helping a noob like me out.
Porcelainfog said:
Ok, I'll try it without unlocking the bootloader and let you know what happens. Is your new version of nougat working properly (unrooted?)? Is there a difference between the nougat I am going to flash, and the OTA i'll get in a few weeks? (If you say there is no difference, I'll flash it ASAP without unlocking boot loader and let you know. Working daydream, playstore, and moto mods right?)
Again, thank you for helping a noob like me out.
Click to expand...
Click to collapse
Seems to be working properly, at least from what I remember of Nougat on my 6P. I've had not force closes or other issues. I haven't tried Daydream apps out yet, but they did install fine (which they wouldn't under Marshmallow - got the "not compatible with your device" message). Play Store works fine, Incipio Battery Moto Mod works fine, haven't tested the others yet.
As far as what's different between this version and the OTA in a few weeks, I have no clue - but from what I gather this is a stock Nougat pulled from a device that got the OTA (don't quote me on that though hah). As for a few weeks, where are you hearing that? Can't get an answer out of Telus at all here and am wondering if maybe they're working on pushing it out as 7.1.x instead of 7.0. Who knows...
Let me know how it goes without unlocking the boot loader, having a ***** of a time trying to get it relocked lol (not the end of the world though).
pixelens said:
Seems to be working properly, at least from what I remember of Nougat on my 6P. I've had not force closes or other issues. I haven't tried Daydream apps out yet, but they did install fine (which they wouldn't under Marshmallow - got the "not compatible with your device" message). Play Store works fine, Incipio Battery Moto Mod works fine, haven't tested the others yet.
As far as what's different between this version and the OTA in a few weeks, I have no clue - but from what I gather this is a stock Nougat pulled from a device that got the OTA (don't quote me on that though hah). As for a few weeks, where are you hearing that? Can't get an answer out of Telus at all here and am wondering if maybe they're working on pushing it out as 7.1.x instead of 7.0. Who knows...
Let me know how it goes without unlocking the boot loader, having a ***** of a time trying to get it relocked lol (not the end of the world though).
Click to expand...
Click to collapse
Hey so I got it onto 7.0 finally. I ended up unlocking my bootloader. I didn't try without it, I read somewhere that it could cause a soft brick. Just wanted to say thanks to you guys that helped and Prfndhatrdofman (if he reads this) for his guide.
PS
holy ****ing ****. **** adb. **** android studio. **** drivers. And ****ing .zip extentions (took me like 30 minutes to put .zip on the end of Blur_Version...zip. Yes, I am an idiot).
Telus appears to have finally updated their update page for moto z nougat. Tentative date of December 19.
Forum post - Telus
Dawnhawk said:
Telus appears to have finally updated their update page for moto z nougat. Tentative date of December 19.
Forum post - Telus
Click to expand...
Click to collapse
LOL, of course they did!
---------- Post added at 04:26 PM ---------- Previous post was at 04:25 PM ----------
Porcelainfog said:
Hey so I got it onto 7.0 finally. I ended up unlocking my bootloader. I didn't try without it, I read somewhere that it could cause a soft brick. Just wanted to say thanks to you guys that helped and Prfndhatrdofman (if he reads this) for his guide.
PS
holy ****ing ****. **** adb. **** android studio. **** drivers. And ****ing .zip extentions (took me like 30 minutes to put .zip on the end of Blur_Version...zip. Yes, I am an idiot).
Click to expand...
Click to collapse
Cool. And ya re ADB haha
FOR MOTO G7 PLUS ONLY!!!
Hello, everyone.
I created a .bat file "executable " For those who want to flash the stock rom on your Moto G7 Plus.
Just put it in the stock Rom folder along with the fastboot files and run the file.
For those who want the file, just download it by the following link or download the file that is on the thread.
http://www.mediafire.com/file/q836uaerr17pn0f/Flash_ROM_G7%252B.zip/file
Could you share where to get the Stock ROM fein?
---------- Post added at 11:13 PM ---------- Previous post was at 10:25 PM ----------
Tried the same sequence with a Stock ROM last week, but didn't achieve to get back to original ROM. I always get the prompt in the initial boot, that a different OS is installed than the original. This has the consequence that I cannot upgrade wit OTA anymore. And there is an upgrade already available (Jan security patch)
moto g7 G7........
any one have a flash rom.bat stock rom for moto g7.......
Which stock rom did you flash on your Moto g7 plus?
Where can I find the stock rom?
Nes.
NesNol said:
Where can I find the stock rom?
Nes.
Click to expand...
Click to collapse
Didn't you just find it yesterday on the telegram group?
What was the problem that you asked again here today?
Latest Stock ROM RETAIL at that link is the one we have all been using.
You'll need to download it to a computer, unzip it in a folder with the fastboot/ADB files, then fastboot flash it with phone attached in bootloader mode.
NesNol said:
Where can I find the stock rom?
Nes.
Click to expand...
Click to collapse
You have a model of the XT1965-3 smartphone and region of the software is reteu? Then this your last firmware.
"Your device has loaded a different operating system."
baikal0912 said:
You have a model of the XT1965-3 smartphone and region of the software is reteu? Then this your … .
Click to expand...
Click to collapse
Thank you very much!
I guess that the software channel was reteu.
A second moto g7 phone I bought - and is unmodified - says "software channel: reteu".
The information on the package of my phone says XT1965-3.
I flashed this image already, the result is a 'working' system except for the message at the start "Your device has loaded a different operating system." .
NesNol said:
Thank you very much!
I guess that the software channel was reteu.
A second moto g7 phone I bought - and is unmodified - says "software channel: reteu".
The information on the package of my phone says XT1965-3.
I flashed this image already, the result is a 'working' system except for the message at the start "Your device has loaded a different operating system." .
Click to expand...
Click to collapse
This will get rid of that message we all got too:
[Bootlogo] Modded Bootlogo from unlocked bootloader
The new RETEU stock version was just updated in last few days, before that not available and you could have used the RETAIL channel that I mentioned above, it worked fine for several users on RETEU channel.
Dahenjo said:
This will get rid of that message we all got too:
The new RETEU stock version was just updated in last few days, before that not available and you could have used the RETAIL channel that I mentioned above, it worked fine for several users on RETEU channel.
Click to expand...
Click to collapse
Get rid of the message?
Does that also mean that OTAs will work? That banking apps will not complain about the integrity of the system?
Thanks!
NesNol said:
Get rid of the message?
Click to expand...
Click to collapse
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
After unlocking bootloader there is some message like this on starting device, keep in mind we all got these too and everything is fine but we like to cover it up with a different bootlogo, just looks better that is its only purpose. This message is because you also upgraded the firmware, meaning it's not really a different OS but only a different version of your correct OS.
Does that also mean that OTAs will work? That banking apps will not complain about the integrity of the system?
Click to expand...
Click to collapse
For G7 Plus we are not getting the OTAs properly after unlocking or rooting, I was originally rooted on PPW29.98-28 and repeatedly got the notifications of upgrading to 29.98-66-2 but it kept failing, the only way to stop it was freezing the Moto Update Process using Titanium Backup. So my only remaining option to upgrade was to fastboot flash the full firmware, as you just did, it wipes your data but gets you to the same place.
With future updates we may be able to capture them and then a dev can make them into a TWRP flashable zip with no wiping of internal data. We had that on G5 Plus which was a nice thing and they are still doing that. But until that might happen the best we can do is the same for now - when your channel has an update just get it from lolinet (these are all official stock firmwares there) and fastboot flash after backing up your data.
Usually it is more from the rooting (if you did that too) that may mess up your banking or other apps, but in Magisk there are settings that may work on that, you'll just have to try and see but there are mixed results. My choice is to not use banking apps on my devices anyway even if not unlocked or rooted, I just do it from home on a computer that I won't forget and leave out in public somewhere. :crying:
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
…
…
Click to expand...
Click to collapse
Hi,
thank you very much for your elaborate answer!
I will come back on it soon.
Nes
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
After unlocking bootloader there is some message like this on starting device, keep in mind we all got these too and everything is fine but we like to cover it up with a different bootlogo, just looks better that is its only purpose. This message is because you also upgraded the firmware, meaning it's not really a different OS but only a different version of your correct OS.
For G7 Plus we are not getting the OTAs properly after unlocking or rooting, I was originally rooted on PPW29.98-28 and repeatedly got the notifications of upgrading to 29.98-66-2 but it kept failing, the only way to stop it was freezing the Moto Update Process using Titanium Backup. So my only remaining option to upgrade was to fastboot flash the full firmware, as you just did, it wipes your data but gets you to the same place.
With future updates we may be able to capture them and then a dev can make them into a TWRP flashable zip with no wiping of internal data. We had that on G5 Plus which was a nice thing and they are still doing that. But until that might happen the best we can do is the same for now - when your channel has an update just get it from lolinet (these are all official stock firmwares there) and fastboot flash after backing up your data.
Usually it is more from the rooting (if you did that too) that may mess up your banking or other apps, but in Magisk there are settings that may work on that, you'll just have to try and see but there are mixed results. My choice is to not use banking apps on my devices anyway even if not unlocked or rooted, I just do it from home on a computer that I won't forget and leave out in public somewhere. :crying:
Click to expand...
Click to collapse
So you expect that in future my phone will be OK again? And receive OTAs while having Magisk installed.
I tried indeed to Magisk my phone, as I did with my old OnePlus One.
Which leads to TWRP, but then I discovered that the recovery has disappeared on this Moto!?
Then I was lost, and read about A/B and treble(?).
Concerning the banking applications: Even if I handle the banking transactions on my Mac, I still need the banking app on my phone for authentication.
Which is also true for accessing my medical data (GP, hospitals, etc), insurance companies, taxes, etc.
Last question: Is there a full description of how to magisk my phone?
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
…
…
…
…
Click to expand...
Click to collapse
I have replied to this messages twice.
None has arrived?!
Nes
---------- Post added at 01:34 PM ---------- Previous post was at 01:33 PM ----------
Dahenjo said:
Yes, you said: except for the message at the start "Your device has loaded a different operating system."
…
…
…
…
Click to expand...
Click to collapse
I have replied to this message twice.
None has arrived?!
Nes
NesNol said:
So you expect that in future my phone will be OK again? And receive OTAs while having Magisk installed.
I tried indeed to Magisk my phone, as I did with my old OnePlus One.
Which leads to TWRP, but then I discovered that the recovery has disappeared on this Moto!?
Then I was lost, and read about A/B and treble(?).
Concerning the banking applications: Even if I handle the banking transactions on my Mac, I still need the banking app on my phone for authentication.
Which is also true for accessing my medical data (GP, hospitals, etc), insurance companies, taxes, etc.
Last question: Is there a full description of how to magisk my phone?
Click to expand...
Click to collapse
Sorry not to reply yet, I sometimes have other things going on besides my phone. Also I thought I gave you a good answer on the situation, based on what I know as just another user (not a dev, not with Moto).
Yes, there have been changes since your last phone, it was the same for me. So it's good to find out as much as possible before deciding to unlock & root again, because the results may not be like before. We used to unlock and flash TWRP directly but we can't do that now or maybe brick the phone. It is always the risk when choosing not to remain fully stock/locked/etc as when you bought it, and with that is a responsibility to do the research first and not just expect other users to tell you every step.
So I don't know if things will change, but for now we can't get OTAs anymore after unlocking. For me I didn't mind and I am willing to upgrade manually if that let's me work with the device the way I like with root & using custom ROMs etc. I didn't plan to ever go back to how I bought it and don't need banking apps or other types that rooting might mess up. For others that may not be the case so they must learn the situation then decide for themselves.
As for installing Magisk, now we have TWRP working enough to just put the Magisk zip on your SD card and install it in TWRP. Before we had a functional TWRP we had another method by installing Magisk Manager and using it to patch the boot.img then fastboot flash that, but it's not needed anymore since TWRP, just do it the old way now.
Flashing the roms from lolinet, in my case ( RETEU[/URL) is a complete reset of the phone, I assume.
To flash, these steps should be right:
Copying the firmware to sdcard.
Boot in TWRP
Flashing the lolinet firmware.
Delete Dalvik Cache.
Should TWRP and Magisk be reinstalled immedeately after this procedure? Or renew the developer mode, reinstall twrp and magisk?
Woif said:
Flashing the roms from lolinet, in my case RETEU is a complete reset of the phone, I assume.
To flash, these steps should be right:
Copying the firmware to sdcard.
Boot in TWRP
Flashing the lolinet firmware.
Delete Dalvik Cache.
Should TWRP and Magisk be reinstalled immedeately after this procedure? Or renew the developer mode, reinstall twrp and magisk?
Click to expand...
Click to collapse
It won't work to flash full firmware in TWRP, so far the only way is using fastboot with phone connected to a computer in bootloader (unlocked) mode. Unzip firmware into your fastboot/ADB folder and also the batch file available in this thread, then run the batch file.
Yes this will reset/wipe your phone (except for SD) so backup your data first, and it will be like when you first bought it. You can reinstall TWRP and then Magisk, but boot to system first and set things up including enabling USB debugging setting in developer options again.
I am going to try and update now as the notifications are much too annoying.
Moto G7 Plus - lake Stock rom / firmware download here
NesNol said:
Where can I find the stock rom?
Nes.
Click to expand...
Click to collapse
Moto G7 Plus - lake
Download the Moto G7 Plus - lake stock firmware according to the Country/region/retail/carrier for example US Retail > T-Mobile, Verizon or Amazon, and everything is flashed through fastboot mode
XT1965-2 > https://boycracked.com/2019/02/11/official-motorola-moto-g7-plus-xt1965-2-stock-rom/
XT1965-3 > https://boycracked.com/2019/02/11/official-motorola-moto-g7-plus-xt1965-3-stock-rom/
XT1965-4 > https://boycracked.com/2019/02/11/official-motorola-moto-g7-plus-xt1965-4-stock-rom/
XT1965-6 > https://boycracked.com/2019/07/26/official-motorola-moto-g7-plus-xt1965-6-lake_retcn-stock-rom/
XT1965-9 > https://boycracked.com/2019/07/26/official-motorola-moto-g7-plus-xt1965-9-lake-stock-rom/
XT1965-T > https://boycracked.com/2019/07/26/o...-g7-plus-xt1965-t-lake-us-t-mobile-stock-rom/
Remove the line
'fastboot erase userdata'
from the flashROM.bat file and it won't factory reset. It will act like an upgrade.
Sent from my Moto Z (2) using XDA Labs
vickbuitenzorg said:
Moto G7 Plus - lake
Download the Moto G7 Plus - lake stock firmware according to the Country/region/retail/carrier for example US Retail > T-Mobile, Verizon or Amazon, and everything is flashed through fastboot mode
Click to expand...
Click to collapse
Can I use a different retail code than current stock? My phone is XT1965-2, PPW29.98-28, RETLA. The system reminders are all in Spanish. Could I update to PPW29.98-66, EEGB (UK English) without a problem?
Also, if this is possible, could I update by removing the 'fastboot erase userdata' line from the BAT file, or, due to the language change, would I need to leave that line and do a factory reset?
I'd like to keep this simple. I tried rooting and not a single tutorial on here has ended with root privileges for various reasons. I'm done with it. I flashed stock firmware in hopes of removing any trace of files that may have been altered during the various root tutorials I followed, but Samsung Pass says the device is still rooted.
What do I need to do to return to 100% stock?
noxarcana said:
I'd like to keep this simple. I tried rooting and not a single tutorial on here has ended with root privileges for various reasons. I'm done with it. I flashed stock firmware in hopes of removing any trace of files that may have been altered during the various root tutorials I followed, but Samsung Pass says the device is still rooted.
What do I need to do to return to 100% stock?
Click to expand...
Click to collapse
I assume you unlocked the bootloader. Try Relocking and flash the firmware again.
Weather that will work is anybodys guess.
Rooting is a pretty simple procedure I can't think of any reason it didn't work except user error.
This method works perfectly on T860.
***********************
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
jhill110 said:
I assume you unlocked the bootloader. Try Relocking and flash the firmware again.
Weather that will work is anybodys guess.
Rooting is a pretty simple procedure I can't think of any reason it didn't work except user error.
Click to expand...
Click to collapse
Well, this isn't the first time I've rooted a device and I followed every step of every tutorial I found on here and, for some reason, it would not root. This is the first, and only, device I've had this much trouble with.
The tutorial for rooting without TWRP: I made the patched AP file and flashed it; however, I could not boot into recovery or download mode and it always stuck on the boot logo.
The tutorial for installing TWRP didn't have a link for the encryption disabler and the one I found did absolutely nothing and the folders in storage just showed as a string of numbers and letters.
Maybe, if someone could put together a full tutorial with the files being used within the tutorial, it would have worked.
noxarcana said:
Well, this isn't the first time I've rooted a device and I followed every step of every tutorial I found on here and, for some reason, it would not root. This is the first, and only, device I've had this much trouble with.
The tutorial for rooting without TWRP: I made the patched AP file and flashed it; however, I could not boot into recovery or download mode and it always stuck on the boot logo.
The tutorial for installing TWRP didn't have a link for the encryption disabler and the one I found did absolutely nothing and the folders in storage just showed as a string of numbers and letters.
Maybe, if someone could put together a full tutorial with the files being used within the tutorial, it would have worked.
Click to expand...
Click to collapse
Did you get the bootloader unlocked?
Unlocking the bootloader:
https://www.getdroidtips.com/how-to...to_Unlock_Bootloader_on_Samsung_Galaxy_Tab_S6
To get to download mode it's volume up and volume down then plug your pc into device. NOT POWER AND VOLUME DOWN. This can be a pain in the back side.
If you do it this way you'll get the option unlock / lock bootloader or go to bootloader mode.
If you follow the instructions perfectly and then follow the instructions for rooting it will work.
Move on to root.
ROOTING :
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
AP SLOT = PATCHED FILE
BL SLOT = BL FILE
CP SLOT = CP FILE (T865) NOT T860... T860 HAS NO CP FILE
CSC SLOT =HOME CSC FILE
DON'T forget to setup WiFi before installing magisk manager. ^^^^^^^^^
Install TWRP.
TWRP :
https://forum-xda--developers-com.c...b-s6/development/recovery-twrp-3-3-1-t3975587
I hope this helps you out.
If you have anymore questions just ask.
Disable DM VERITY ENCRIPTION DISABLER
PATCHED ODIN
jhill110 said:
Did you get the bootloader unlocked?
Click to expand...
Click to collapse
Yep, bootloader unlock was easy. I'll give root another try with your steps in a couple of days when I'm off work. Sorry if I came across a bit aggressive in my previous posts; I have a tendency to do so even when I'm not frustrated.
This has been so frustrating to me because I know rooting is usually a simple process; as you said previously.
jhill110 said:
ROOTING :
https://forum-xda--developers-com.c...-to/root-guide-t860-root-twrp-method-t4095677
AP SLOT = PATCHED FILE
BL SLOT = BL FILE
CP SLOT = CP FILE (T865) NOT T860... T860 HAS NO CP FILE
CSC SLOT =HOME CSC FILE
DON'T forget to setup WiFi before installing magisk manager. ^^^^^^^^^
Click to expand...
Click to collapse
So, yea, I'm a bit late getting around to this. Sorry.
This is where things get hung up. Everything flashes just fine and I can even get into TWRP; however, when I try to boot the tablet i get the Galaxy Tab S6 screen, then the warning about the bootloader being unlocked, and back to the Galaxy Tab S6 screen but with a "unofficial software" warning....and repeat. It just boot loops and this is where I've since I started this thread.
Also, returning to stock doesn't completely remove root traces as I can't use Samsung Pass and I simply get a warning about the device seemingly being rooted even though it isn't.
If you installed TWRP, then you tripped Knox tripping Knox will permentally disable Samsung Pay as far as I'm aware. You'll never get it back, regardless of root or no root access.
Also, I'm not sure why you're installing TWRP AND trying to flash a Magisk patched OS. It's one or the other, you don't need to do both. Unless something has changed in Android 10?
If you're flashing TWRP, you just need to flash Magisk in TWRP(along with the other files!), no need to patch AP.
bartleby999 said:
If you installed TWRP, then you tripped Knox tripping Knox will permentally disable Samsung Pay as far as I'm aware. You'll never get it back, regardless of root or no root access.
Also, I'm not sure why you're installing TWRP AND trying to flash a Magisk patched OS. It's one or the other, you don't need to do both. Unless something has changed in Android 10?
If you're flashing TWRP, you just need to flash Magisk in TWRP(along with the other files!), no need to patch AP.
Click to expand...
Click to collapse
Not Samsung Pay, I couldn't care less about that, but Samsung Pass; I guess it looks for knox being tripped now too. That sucks, but I'll make do without it.
I was following the guides posted above. The root guide said to flash a Magisk patched OS and then there was a guide for installing TWRP. I never had this many issues or this much confusion with my 1st gen Tab S; maybe I just haven't kept as close of an eye on these things since I've been without a tablet for awhile before getting the Tab S6.
Anyway, for clarification, all I need to do is flash TWRP and then flash magisk from within TWRP? Or, just install the magisk apk after booting into Android?
noxarcana said:
Not Samsung Pay, I couldn't care less about that, but Samsung Pass; I guess it looks for knox being tripped now too. That sucks, but I'll make do without it.
I was following the guides posted above. The root guide said to flash a Magisk patched OS and then there was a guide for installing TWRP. I never had this many issues or this much confusion with my 1st gen Tab S; maybe I just haven't kept as close of an eye on these things since I've been without a tablet for awhile before getting the Tab S6.
Anyway, for clarification, all I need to do is flash TWRP and then flash magisk from within TWRP? Or, just install the magisk apk after booting into Android?
Click to expand...
Click to collapse
My bad for some reason I just read that as Samsung Pay. But yeah Samsung Pass also doesn't work with root, I'm not sure if that is permanent though as I've never used Samsung Pass, but did come across this thread https://forum.xda-developers.com/general/rooting-roms/samsung-pass-knox-tripped-devices-t3687977 it is possible to get some components of Knox to function again, (I have a working Secure Folder) so might be worth taking a look.
As for you question...
You should give this thread a good read... https://forum.xda-developers.com/galaxy-tab-s6/development/recovery-twrp-3-3-1-t3975587
Basic steps are... Unlock the bootloader and then boot into system and ensure it's unlocked in settings. You may need to connect to the web, I can't remember tbh
First you need to install TWRP, once that is done you need to reboot but YOU HAVE TO boot directly back into TWRP. You cannot boot into system, or TWRP will be overwritten by stock recovery and you'll need to start over again. Once TWRP is installed, boot into TWRP and format data then reboot recovery, flash Kernel then flash encryption disabler then unmount the system and flash Magisk 20.4 - Finally reboot to system.
I'd seriously and strongly suggest reading that TWRP thread to ensure things go smoothly.
bartleby999 said:
First you need to install TWRP, once that is done you need to reboot but YOU HAVE TO boot directly back into TWRP. You cannot boot into system, or TWRP will be overwritten by stock recovery and you'll need to start over again. Once TWRP is installed, boot into TWRP and format data then reboot recovery, flash Kernel then flash encryption disabler then unmount the system and flash Magisk 20.4 - Finally reboot to system.
I'd seriously and strongly suggest reading that TWRP thread to ensure things go smoothly.
Click to expand...
Click to collapse
I'll give those threads a thorough reading over tonight and tomorrow night while at work and then see if I can get this all sorted out Monday when I'm off. I remember Pass still working with root on the original Tab S so I'm hoping it hasn't changed.
Thanks for jumping in to try and help me with this. I'll update within a few days instead of months like my last update. ?
noxarcana said:
I'll give those threads a thorough reading over tonight and tomorrow night while at work and then see if I can get this all sorted out Monday when I'm off. I remember Pass still working with root on the original Tab S so I'm hoping it hasn't changed.
Thanks for jumping in to try and help me with this. I'll update within a few days instead of months like my last update. ?
Click to expand...
Click to collapse
It has definitely changed. Pass doesn't work on my Tab S6 and I'm rooted, I guess Knox is now integrated with alot of Samsung apps now. Not sure if it's possible or not to get it working again though, I've never bothered to research it as I don't need it for anything - But as I said, I got Secure Folder working again, so there's some hope for Pass I guess - That first thread I linked looked promising, but I only skimmed it, because frankly I'm not interested.
If you need anymore help, report back -I'll try my best. Also, the TWRP thread I linked is full of helpful people. :good:
bartleby999 said:
It has definitely changed. Pass doesn't work on my Tab S6 and I'm rooted, I guess Knox is now integrated with alot of Samsung apps now. Not sure if it's possible or not to get it working again though, I've never bothered to research it as I don't need it for anything - But as I said, I got Secure Folder working again, so there's some hope for Pass I guess - That first thread I linked looked promising, but I only skimmed it, because frankly I'm not interested.
If you need anymore help, report back -I'll try my best. Also, the TWRP thread I linked is full of helpful people. :good:
Click to expand...
Click to collapse
Perhaps I'm just not meant to have root with this device. Flashing that kernel causes Wifi not to work, but it does boot. Not flashing the kernel also booted, but I couldn't install Magisk Manager. Other than the bootloader still being unlocked, I'm back on stock firmware.
noxarcana said:
Perhaps I'm just not meant to have root with this device. Flashing that kernel causes Wifi not to work, but it does boot. Not flashing the kernel also booted, but I couldn't install Magisk Manager. Other than the bootloader still being unlocked, I'm back on stock firmware.
Click to expand...
Click to collapse
What firmware are you running?
I remember seeing something about one of the newer Kernels effecting WIFI on Android 10. Assume you're running that?
If that's the case, give the TWRP thread a browse - You maybe able to find an older version of the Kernel that'll work - As far as I'm aware, an older Kernel than what you currently installed will work, but a newer version than currently installed will possibly cause bootloop.
I can't help much with Android 10 specific stuff as I'm still running Android 9 because it's stable.
bartleby999 said:
What firmware are you running?
I remember seeing something about one of the newer Kernels effecting WIFI on Android 10. Assume you're running that?
If that's the case, give the TWRP thread a browse - You maybe able to find an older version of the Kernel that'll work - As far as I'm aware, an older Kernel than what you currently installed will work, but a newer version than currently installed will possibly cause bootloop.
I can't help much with Android 10 specific stuff as I'm still running Android 9 because it's stable.
Click to expand...
Click to collapse
I am definitely on the latest Android 10 update so I'll see if I can find an earlier version that will work. I'll see what I can find out on the TWRP thread.
noxarcana said:
I am definitely on the latest Android 10 update so I'll see if I can find an earlier version that will work. I'll see what I can find out on the TWRP thread.
Click to expand...
Click to collapse
If you can't find an older Kernel (I'm not sure there is one for Android 10), it may be the case that you'll need to wait for the Kernel to be updated.
bartleby999 said:
If you can't find an older Kernel (I'm not sure there is one for Android 10), it may be the case that you'll need to wait for the Kernel to be updated.
Click to expand...
Click to collapse
Yea, it looks like Samsung made some "wifi improvements" in OneUI 2.5 and that's causing some kernel issues preventing wifi from working. I think I could find a kernel fairly easily, but I think I'm just going to wait for a kernel update. If it never comes, I'll find an older kernel. Thanks for the help!