Unofficial TWRP 3.1.0-0 Moto G5 (cedric)
Latest TWRP changelog :
New features of 3.1.1-0 (adb backup, tweaked MTP startup routines and plenty of bug fixes - for full changelog)
Download Link
twrp-3.1.1-0-cedric.img
Working/Bugs
I have just tested on 16 GB variant and all seems to be working. If something is broken lemme know.
IMPORTANT NOTE :
At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Force encryption is enabled by default in stock OS and twrp will successfully decrypt /data at first boot if all goes well
If in case decryption doesn't go fine, twrp will popup a dialog box asking for password and that means decryption went wrong and you would need to wipe data once via twrp wipe options and reboot back to twrp for functioning of /data
Installation Guide
Make sure you have unlocked bootloader
Reboot to bootloader
fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary
boot)
XDA:DevDB Information
[Unofficial] TWRP 3.1.1-0 Moto G5, Tool/Utility for the Moto G5
Contributors
Santhosh M
Source Code: http://Using prebuilt stock kernel and hence no kernel source available
Version Information
Status: Stable
Stable Release Date: 2017-10-05
Created 2017-03-17
Last Updated 2017-10-05
Reserved
Reserved
Even though I have the plus variant, it's cool to see these features popping up.
Johny Cipeli said:
Even though I have the plus variant, it's cool to see these features popping up.
Click to expand...
Click to collapse
+1
Grt @Santhosh M
Santhosh M said:
Reserved
Click to expand...
Click to collapse
Gonna get that g5+ Bro? it would be awesome if you will be there for support too.
xt1670 model
Hi Santhosh
Will this TWRP work on Moto G5 model xt1670?
If so, can it be rooted using twrp temporary boot?
EDIT: I have tried this several time, I'm always getting stuck at boot, after the first data wipe, only solution is to install stock system again.
I have the Modem Version: M8937_8000.122.02.40R, 32GB
I'm offering to test
Thanks
Works fine for the most part, though reboot options Bootloader and Power Off doesn't work, just restarts normally.
XT1676
KawaiiNeko said:
Works fine for the most part, though reboot options Bootloader and Power Off doesn't work, just restarts normally.
XT1676
Click to expand...
Click to collapse
Plz share the procedure you had followed.
Did you able to achieve root access?
fAIyaZ said:
Plz share the procedure you had followed.
Did you able to achieve root access?
Click to expand...
Click to collapse
Unlocked bootloader, flashed twrp, factory reset, good to go. Sadly no root though.
KawaiiNeko said:
Unlocked bootloader, flashed twrp, factory reset, good to go. Sadly no root though.
Click to expand...
Click to collapse
Try phh su.
Flash it through twrp: https://superuser.phh.me/superuser.zip
Then installed the phh superuser app: https://play.google.com/store/apps/d....phh.superuser
fAIyaZ said:
Try phh su.
Flash it through twrp: https://superuser.phh.me/superuser.zip
Then installed the phh superuser app: https://play.google.com/store/apps/d....phh.superuser
Click to expand...
Click to collapse
worked perfectly! https://i.imgur.com/71G0cN2.png
I'll get my G5 16gb lunar grey tomorrow and can't wait to root
Thanks for testing out
Bootlooping
Hi guys, I got bootloop in my moto g5 after TWRP boot/install, should I open a new thread or somebody can help here?
linsspinho said:
Hi guys, I got bootloop in my moto g5 after TWRP boot/install, should I open a new thread or somebody can help here?
Click to expand...
Click to collapse
Depending on your phone version, you might need to flash system using fastboot.
KawaiiNeko said:
worked perfectly! https://i.imgur.com/71G0cN2.png
Click to expand...
Click to collapse
So i believe TWRP works as intended and root is also achieved via phh/whatever?
If all works fine for you would like you to make reply in the thread with detailed flashing instructions as i am not sure why few in thread have issues
can this version of twrp be used for POTTER version of moto G5 plus?
After installing TWRP my Phone stucks at the "Your device has been unlocked" screen. My system seems to be gone. I've downloaded the image from the other thread and tried to sideload it, but twrp says it's in the wrong format. TWRP boots fine
(Anyone who can upload a fully working NANDROID or sth like that?)
What can i do :/?
Edit: Solved. Unzipped the firmware and flashed manually via fastboot. Working fine!
But then again at the startup of the recovery, there's the encryption message. What to wipe now, that it'll work? Wiping /data ends in boot loop...
.sirhc said:
After installing TWRP my Phone stucks at the "Your device has been unlocked" screen. My system seems to be gone. I've downloaded the image from the other thread and tried to sideload it, but twrp says it's in the wrong format. TWRP boots fine
(Anyone who can upload a fully working NANDROID or sth like that?)
What can i do :/?
Edit: Solved. Unzipped the firmware and flashed manually via fastboot. Working fine!
But then again at the startup of the recovery, there's the encryption message. What to wipe now, that it'll work? Wiping /data ends in boot loop...
Click to expand...
Click to collapse
Did you tried wiping data, and formatting data? Remember that wiping /data is where your apps and settings are stored, and formatting /data/media is the massive storage... Maybe if you wipe both it would work
Enviado desde mi Moto G (5) Plus mediante Tapatalk
After
fastboot flash recovery twrp.img
I'm booting into recovery, cancel the encryption password verification, swipe to allow modification, wipe & format data -> Bootloop
Flashing system (and only system, not recovery etc) -> Phone boots normally, twrp ist gone ...
Greetings
Related
TWRP 3.1.1-0 Moto G5 plus (potter)
Latest TWRP changelog :
3.1.1-0 full changelog
Working/Bugs :
I have just basically tested and all seems to be working (including decryption of /data). If something is broken lemme know.
Please do read the installation guide note !
IMPORTANT NOTE :
At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Force encryption is enabled by default in stock OS and twrp will successfully decrypt /data at first boot if all goes well
If in case decryption doesn't go fine, twrp will popup a dialog box asking for password and that means decryption went wrong and you would need to wipe data once via twrp wipe options and reboot back to twrp for functioning of /data
Installation Guide :
Make sure you have unlocked bootloader
Reboot to bootloader
fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary
boot)
Download Link :
twrp_3.1.1-0_potter
Have used prebuilt kernel of existing sdcard fixed twrp released by vache and hence there is no kernel source to provide
XDA:DevDB Information
[Unofficial] TWRP 3.1.1-0 Moto G5 Plus, ROM for the Moto G5 Plus
Contributors
Santhosh M, vache
Source Code: http://using prebuilt stock kernel and hence no kernel source available
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Stable Release Date: 2017-03-21
Created 2017-03-21
Last Updated 2017-06-22
Reserved
Reserved
It it working properly? Can i flash Super su by temporary boot? I don't want to brick my device so asked this.. Kindly reply, thanks for the early build
Santhosh M said:
Reserved
Click to expand...
Click to collapse
Oh yussss tysm. Let's start the party. will be flashing right away when ill receive this device on 25
---------- Post added at 03:37 PM ---------- Previous post was at 03:24 PM ----------
virajkin said:
It it working properly? Can i flash Super su by temporary boot? I don't want to brick my device so asked this.. Kindly reply, thanks for the early build
Click to expand...
Click to collapse
It should be working that's why Dev has posted it. Try and let us know.
Santhosh M said:
Unofficial TWRP 3.1.0-0 Moto G5 (potter)
Latest TWRP changelog :
New features of 3.1.0 (adb backup, tweaked MTP startup routines and plenty of bug fixes - for full changelog)
Download Link
twrp-3.1.0-0-potter.img
Working/Bugs
I have just basically tested and all seems to be working. If something is broken lemme know.
Installation Guide
IMPORTANT NOTE : Since force encryption is enabled by default in stock OS TWRP will/might ask for decrypt password for /data while you boot for first time.
You would need to wipe data once via twrp wipe options and reboot back to recovery for twrp for functioning of /data
Make sure you have unlocked bootloader
fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary
boot)
XDA:DevDB Information
[Unofficial] TWRP 3.1.0-0 Moto G5 Plus, ROM for the Moto G5 Plus
Contributors
Santhosh M
Source Code:http://using prebuilt stock kernel and hence no kernel source available
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Stable Release Date: 2017-03-21
Created 2017-03-21
Last Updated 2017-03-21
Click to expand...
Click to collapse
This was the reason I went for this device.
Thank you very much.:good:
I tried booting to this recovery by fastboot boot twrp...img, to flash super su, it asked for a password, I selected cancel, so i couldnot see my internal storage folders, so just selected to reboot the system. Now the phone has stuck on ! Your device will boot in 5 seconds,, please help anyone. OP
virajkin said:
I tried booting to this recovery by fastboot boot twrp...img, to flash super su, it asked for a password, I selected cancel, so i couldnot see my internal storage folders, so just selected to reboot the system. Now the phone has stuck on ! Your device will boot in 5 seconds,, please help anyone. OP
Click to expand...
Click to collapse
Make sure u read whole OP at least once. Try to boot into fastboot. And flash again the twrp. U need to wipe your data with twrp first. Than boot ur device. Than flash latest stable SuperSu zip.
Thanks @Santhosh M for bringing twrp this fast will flash it as soon as my device arives.
fAIyaZ said:
Make sure u read whole OP at least once. Try to boot into fastboot. And flash again the twrp. U need to wipe your data with twrp first. Than boot ur device. Than flash latest stable SuperSu zip.
Thanks @Santhosh M for bringing twrp this fast will flash it as soon as my device arives.
Click to expand...
Click to collapse
Booted in TWRP and tried to wipe data, it gives error "failed to mount /data Invalid argument", unable to mount storage
virajkin said:
I tried booting to this recovery by fastboot boot twrp...img, to flash super su, it asked for a password, I selected cancel, so i couldnot see my internal storage folders, so just selected to reboot the system. Now the phone has stuck on ! Your device will boot in 5 seconds,, please help anyone. OP
Click to expand...
Click to collapse
even i got the same error message. guess i'll have to wait for stock firmware to be available now to flash and go back to stock and try again
virajkin said:
I tried booting to this recovery by fastboot boot twrp...img, to flash super su, it asked for a password, I selected cancel, so i couldnot see my internal storage folders, so just selected to reboot the system. Now the phone has stuck on ! Your device will boot in 5 seconds,, please help anyone. OP
Click to expand...
Click to collapse
virajkin said:
Booted in TWRP and tried to wipe data, it gives error "failed to mount /data Invalid argument", unable to mount storage
Click to expand...
Click to collapse
deepakdtg said:
even i got the same error message. guess i'll have to wait for stock firmware to be available now to flash and go back to stock and try again
Click to expand...
Click to collapse
Any advice? @Santhosh M
is it like we have to give password and not cancel it? and than wipe data and reboot?
none its properly mentioned to decrypt your device , why do you guys even hesitate to read
Seems like race got stared.
The download link does not work
Yes...Press cancel...Wipe data and reboot...It worked perfectly.
Would be better if someone actually followed exact that way and report if all is fine
Santhosh M said:
Yes...Press cancel...Wipe data and reboot...It worked perfectly.
Would be better if someone actually followed exact that way and report if all is fine
Click to expand...
Click to collapse
But I get error unable to mount /data invalid argument, phone stuck at warning message, please help
jaombk said:
The download link does not work
Click to expand...
Click to collapse
Just save the link. It'll dwld the file.
rayzen6 said:
Just save the link. It'll dwld the file.
Click to expand...
Click to collapse
Without success to download, would have another link to download.
@Santhosh M
Are you going to develop for G5 Plus? I enjoyed your roms for kenzo but you left the development.
Any plans for G5/G5 Plus?
jaombk said:
Without success to download, would have another link to download.
Click to expand...
Click to collapse
I can't able to upload here without dev's permission.
---------- Post added at 08:18 PM ---------- Previous post was at 08:02 PM ----------
naturist said:
@Santhosh M
Are you going to develop for G5 Plus? I enjoyed your roms for kenzo but you left the development.
Any plans for G5/G5 Plus?
Click to expand...
Click to collapse
+1
Never had kenzo but I was looking at development from beginning on that device. He was the first who brings custom rom to kenzo.
Squid will support and now santhosh has already started and gave twrp very fast. Future looks very bright to me.
naturist said:
@Santhosh M
Are you going to develop for G5 Plus? I enjoyed your roms for kenzo but you left the development.
Any plans for G5/G5 Plus?
Click to expand...
Click to collapse
I think that we will see squid2 here
Sent from my Moto G 2014 using XDA Labs
Unofficial TWRP for Moto G5S Plus (Sanders)
Additional Features over Official TWRP:
Supports flashing of both 32bit and 64bit ROMs and Kernels.
OREO Images/ROMs support.
Decryption and Encryption support.
No SuperSU by default.
No TWRP app.
No HTC Dumlock cruft.
Updated pigz compressor (slightly faster and more tolerant of corruption).
NTFS support(Both Read and Write).
Covers more partitions for nandroid backup (OEM, FSG and FSC).
Experimental support for SD cards that are partitioned for partial adopted storage and partial removable storage.
Faster I/O performance.
Fixed Gapps/aroma freeze issues.
IMPORTANT!!! : READ INSTRUCTIONS CAREFULLY BEFORE PROCEEDING TO FLASHING PROCESS..!!
At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either Magisk or flash any of the verity disabler zips available on xda.
Force encryption is enabled by default in stock OS and twrp will successfully decrypt /data at first boot if all goes well
If in case decryption doesn't go fine, twrp will popup a dialog box asking for password and that means decryption went wrong and you would need to wipe data once via twrp wipe options and reboot back to twrp for functioning of /data
Flashing Instructions:
Using Existing TWRP:
Reboot to recovery > Click on Install > Install Image > recovery > select recovery image and flash > reboot to recovery
Other Methods(Fastboot) :
Make sure you have unlocked bootloader
Reboot to bootloader
Enter following command in terminal: fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary boot)
Incase your device is encrypted (while coming from stock rom), Follow these steps to decrypt:
Reboot to recovery > cancel the password prompt > mount all partitions > Format Data/Userdata (on f2fs) > Reboot Recovery > Mount all partitions again > Flash Magisk > Reboot
Now you are free to use Stock ROM (Decrypted) or Flash any custom rom you want.
Download Links: https://www.androidfilehost.com/?w=files&flid=216298
TWRP Themes: Check 3rd post
Known Issues: None || Report if you find any.
XDA:DevDB Information
[RECOVERY][UNOFFICIAL][Sanders] TWRP-3.2.1-r20 (64bit Supported!), Tool/Utility for the Moto G5S Plus
Contributors
CheckYourScreen
Source Code: https://github.com/CheckYourScreen/twrp_device_motorola_sanders
Version Information
Status: Stable
Current Stable Version: r20
Stable Release Date: 2018-04-04
Created 2017-10-26
Last Updated 2018-04-04
|| Changelog ||
r20:
Fixed Encryption support on custom roms.
Updated kernel
Updated build fingerprint for latest bootloader support.
Reverted pigz changes.
Switched back to original twrp themes. (TWRP Themes can be found in 3rd post )
Various bug fixes and improvements.
r16:
Fixed compatibility with New Bootloader (C2.07-December patch)
Merged october patches in kernel.
Various twrp upstream patches and fixes.
Fixed remote wipe process (Earlier remote wipe issued from play account wasnt processed due to twrp)
r15:
Added 64bit Support (You can flash both 32bit/64bit roms or kernels with it).
Fixed Encryption Support! (No need to format data to decrypt and mount).
Updated to 3.2.1 upstream changes with full oreo support.
Remove android reboot during password check on multiple wrong inputs.
r9:
Fixed F2FS mount issues(You can flash magisk modules or SuperSu now).
Enabled NTFS Write Support (You can make backups on sdcard/pendrives formatted on NTFS).
Fixed size of various partitions.
Switched to LZMA compression to decrease size.
r7: Initial Public Release
|| Themes ||
Here are some of the twrp themes:
Preview images: https://photos.app.goo.gl/DLrfDseGzfxE8Uq93
Download link: https://androidfilehost.com/?w=files&flid=233551
:good:
Only one that has actually be working for me ever since I got the phone. Thank you for your efforts.
this seems to suffer from the same thing the stock rom/kernel suffers from, the weird f2fs bug that makes certain mounts fail. geneticengineer has shared a kernel that fixes this in stock rom , maybe you could get in touch with him about how he updated f2fs
Thank you for your work, this seems to work well on my device. If you would like to swap the kernel, I posted a newer firmware NPS26.116-45 here:https://forum.xda-developers.com/showpost.php?p=74325160&postcount=33
revengineer said:
Thank you for your work, this seems to work well on my device. If you would like to swap the kernel, I posted a newer firmware NPS26.116-45 here:https://forum.xda-developers.com/showpost.php?p=74325160&postcount=33
Click to expand...
Click to collapse
But its for xt1806 only i think. Not real help. The most user here are outside usa.
Schrotty35 said:
But its for xt1806 only i think. Not real help. The most user here are outside usa.
Click to expand...
Click to collapse
Well my guess is that the kernel in the present twrp is from the -26 firmware posted in the other thread. That firmware was US Retail also. The OP in the other thread states in can be used on other models. But I am not going to tell you that because I do not know. I have not found any other firmware for the sanders model.
Ae3NerdGod said:
this seems to suffer from the same thing the stock rom/kernel suffers from, the weird f2fs bug that makes certain mounts fail. geneticengineer has shared a kernel that fixes this in stock rom , maybe you could get in touch with him about how he updated f2fs
Click to expand...
Click to collapse
Afaik it doesnt affect TWRP, you just need to be on a custom kernel if you are running stock rom.
Twrp has nothing to do with it.
If you face any problem flashing anything then post a screenshot or log.
revengineer said:
Thank you for your work, this seems to work well on my device. If you would like to swap the kernel, I posted a newer firmware NPS26.116-45 here:https://forum.xda-developers.com/showpost.php?p=74325160&postcount=33
Click to expand...
Click to collapse
Schrotty35 said:
But its for xt1806 only i think. Not real help. The most user here are outside usa.
Click to expand...
Click to collapse
Stock kernel is same in both the firmwares.
-45 is just for US variant, i dont recommend you to even flash that firmware on other variants.
CheckYourScreen said:
Afaik it doesnt affect TWRP, you just need to be on a custom kernel if you are running stock rom.
Twrp has nothing to do with it.
If you face any problem flashing anything then post a screenshot or log.
Click to expand...
Click to collapse
but i have a custom stock kernel, and things that fail in TWRP work in flashfire or magiskmanager
its mostly magisk modules im having problems with, ill reproduce an error when i get the chance
Ae3NerdGod said:
but i have a custom stock kernel, and things that fail in TWRP work in flashfire or magiskmanager
its mostly magisk modules im having problems with, ill reproduce an error when i get the chance
Click to expand...
Click to collapse
Flash the magisk module via twrp > take screenshot when flashing completes > go to advance section of twrp and take recovery log > reboot system > send that screenshot and recovery log here.
CheckYourScreen said:
Flash the magisk module via twrp > take screenshot when flashing completes > go to advance section of twrp and take recovery log > reboot system > send that screenshot and recovery log here.
Click to expand...
Click to collapse
will do, it happens with every magisk package i try. they used to fail in stock too till i used geneticengineers kernel from telegram now they work
didnt know you could screenshot in recovery, i assume its the same buttons
Ae3NerdGod said:
will do, it happens with every magisk package i try. they used to fail in stock too till i used geneticengineers kernel from telegram now they work
didnt know you could screenshot in recovery, i assume its the same buttons
Click to expand...
Click to collapse
Yes, same buttons to take a screenshot in TWRP
TWRP backup is frozen at 13% completed. The progress bar is still showing its animation.
I unlocked the bootloader, and then rebooted. Android came up with the language selection screen. I powered off, connected the phone to the PC, and booted into TWRP (not flashed yet):
Code:
fastboot boot twrp-3.1.1-sanders-r7.img
I did not let TWRP format /data.
Then I started a backup, selecting all partitions, so that I could always go back after flashing TWRP and Magisk.
Does anyone know why backup is stuck at 13%? Last log line says "Backing up System..."
I tapped "Cancel" after two hours. That stopped the progress bar animation, but not the backup itself.
BTW: I used TWRP from this thread, the one in another thread freezes at the TWRP boot logo.
Edit: after two hours I killed the backup by powering down (the only way it seemed). On retry it froze at 21%.
Edit 2: Retried, this time backing up everything except system. No problem. I then tried to backup system. Frozen at 1%. What is the problem here?
Edit 3: Finally, a complete backup of system! Only one to go: system_image. But unfortunately that froze at 0%. Every subsequent try freezes at 1666MB (40%). The card has over 30GB free. I tried backup to USB-OTG, but that also froze.
gewe said:
TWRP backup is frozen at 13% completed. The progress bar is still showing its animation.
I unlocked the bootloader, and then rebooted. Android came up with the language selection screen. I powered off, connected the phone to the PC, and booted into TWRP (not flashed yet):
Code:
fastboot boot twrp-3.1.1-sanders-r7.img
I did not let TWRP format /data.
Then I started a backup, selecting all partitions, so that I could always go back after flashing TWRP and Magisk.
Does anyone know why backup is stuck at 13%? Last log line says "Backing up System..."
I tapped "Cancel" after two hours. That stopped the progress bar animation, but not the backup itself.
BTW: I used TWRP from this thread, the one in another thread freezes at the TWRP boot logo.
Edit: after two hours I killed the backup by powering down (the only way it seemed). On retry it froze at 21%.
Edit 2: Retried, this time backing up everything except system. No problem. I then tried to backup system. Frozen at 1%. What is the problem here?
Edit 3: Finally, a complete backup of system! Only one to go: system_image. But unfortunately that froze at 0%. Every subsequent try freezes at 1666MB (40%). The card has over 30GB free. I tried backup to USB-OTG, but that also froze.
Click to expand...
Click to collapse
Might be due to data partition being encrypted, you cant write anything in it without decrypting it first.
Format data and reboot recovery, then make the backup. You can flash magisk after taking the backup.
Btw r9 new release on its way with some really important changes
CheckYourScreen said:
Might be due to data partition being encrypted, you cant write anything in it without decrypting it first.
Format data and reboot recovery, then make the backup. You can flash magisk after taking the backup.
Btw r9 new release on its way with some really important changes
Click to expand...
Click to collapse
I was not trying to write the backup to the data partition, but to external SD card (tried OTG-USB as well without success).
I have flashed TWRP, formatted the data partition, and flashed Magisk. I have not tried to create a new backup yet. First I want to find out why Magisk does not pass the Safetynet check.
Can't wait to see what r9 brings. Thanks for your efforts. :good:
gewe said:
I was not trying to write the backup to the data partition, but to external SD card (tried OTG-USB as well without success).
I have flashed TWRP, formatted the data partition, and flashed Magisk. I have not tried to create a new backup yet. First I want to find out why Magisk does not pass the Safetynet check.
Can't wait to see what r9 brings. Thanks for your efforts. :good:
Click to expand...
Click to collapse
Magisk won't pass safety net with stock boot.img (kernel). Here is a modified kernel.
https://forum.xda-developers.com/showthread.php?p=73930507
After flashing new kernel Magisk passes no problem.
Sent by way of magic
lilcdroid said:
Magisk won't pass safety net with stock boot.img (kernel). Here is a modified kernel.
https://forum.xda-developers.com/showthread.php?p=73930507
After flashing new kernel Magisk passes no problem.
Sent by way of magic
Click to expand...
Click to collapse
When I flash this my WiFi stops working completely. I'm running aosp extended rom. I'm not sure if I can achieve battery life as good as I can on the stock ROM as I can on this one so im not sure what I should do about that..
Brycearuuni said:
When I flash this my WiFi stops working completely. I'm running aosp extended rom. I'm not sure if I can achieve battery life as good as I can on the stock ROM as I can on this one so im not sure what I should do about that..
Click to expand...
Click to collapse
Sorry I wasn't aware you weren't still on stock. That kernel will only work on stock. I would verify with the maintainer of AOSP extended ROM that the kernel is patched to work with Magisk.
Sent by way of magic
DisclaimerThis software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.
Note: Currently Oreo 8.1 custom roms are supported only on BKL-L04 with EMUI 8.1
Download and Installation
* Download twrp recovery
* Start your device in fastboot mode
* Install the recovery using the following command:
Code:
fastboot flash recovery_ramdisk [name of the file].img --> ex: fastboot flash recovery_ramdisk twrp_blanc_0.1.img
* Restart with this command:
Code:
fastboot reboot
* As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.
Features
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Note: There are no sources for this yet,because is based on the work of @zxz0O0 ,from Honor 9 forum.
Credits
**** @zxz0O0 - This wouldn't be possible without this guy,so big big thank to him.I used his base to make this recovery work ,so in sign of respect his nick will also be on the TWRP boot screen.Thank again buddy!
**** TeamWin project ,obviously.
Download links
twrp_blanc_0.1.img - initial test release
twrp_bkl_0.2.img - OEMinfo partition is available for backup
twrp_bkl_0.3.img - /cache mounting is fixed,backup /vendor as image (vendor still can't be mounted)
twrp_bkl_0.4.img - /vendor mounting/unmounting is now fixed (thx @ante0 for the script)
twrp_bkl_0.5.img - mounting/unmounting issues shound be fixed , added a new option to exclude OEM path from wiping with Factory Reset and can be enabled/disabled in settings (thx Team OpenKirin for this), this version will work even with newer updates that bump security patch version.
twrp_bkl_0.6.img - Cache wiping issue is now fixed
twrp_bkl_0.7.img - fixed decryption on EMUI 8.1 (now you can use the same password/pin/pattern to decrypt in TWRP), /recovery_ramdisk no longer available for backup./vendor no longer available for backup (use /vendor_image instead),/system and /data can be unmounting issue with 8.1 devices is now fixed.
Pretoriano80 said:
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Click to expand...
Click to collapse
Thanks man! :laugh: Need to test this!
IcipherPT said:
Thanks man! [emoji23] Need to test this!
Click to expand...
Click to collapse
No problem! Please report back if it's working or not.
Pretoriano80 said:
No problem! Please report back if it's working or not.
Click to expand...
Click to collapse
wipe everything to decrypt?
ngoralph said:
wipe everything to decrypt?
Click to expand...
Click to collapse
Nope, just decrypting, like you do when your phone is starting and asks for PIN! [emoji6]
Pretoriano80 said:
No problem! Please report back if it's working or not.
Click to expand...
Click to collapse
Just tested on my honor view 10. It was asking for a password to decrypt. I entered my lockscreen pass and everything was decrypt.
so TWRP CAN decrypt
@youtuber123
did you try a nandroid backup?
youtuber123 said:
Just tested on my honor view 10. It was asking for a password to decrypt. I entered my lockscreen pass and everything was decrypt.
so TWRP CAN decrypt
Click to expand...
Click to collapse
Ok, so it's working!Great,please let me know if something it's broken (backup, restore, MicroSD mounting, etc).
Pretoriano80 said:
Ok, so it's working!Great,please let me know if something it's broken (backup, restore, MicroSD mounting, etc).
Click to expand...
Click to collapse
nandroid (backup and restore) is working
mtp is working too
and micro usb mounting is working
didn't tested to flash something using twrp
youtuber123 said:
nandroid (backup and restore) is working
mtp is working too
and micro usb mounting is working
didn't tested to flash something using twrp
Click to expand...
Click to collapse
There's not much stuff to flash for this device! [emoji16]
Good, finally a useful twrp....
Can we flash LOS using this now?
@Pretoriano80
tried your recovery at my view 10. flashed it via fastboot. had no success. your twrp is hanging at the start screen. tried to flash it via the twrp of dees_troy, the same result. recovery is not booting completely, remains at the twrp start screen. any ideas?
kurvenmeister said:
@Pretoriano80
tried your recovery at my view 10. flashed it via fastboot. had no success. your twrp is hanging at the start screen. tried to flash it via the twrp of dees_troy, the same result. recovery is not booting completely, remains at the twrp start screen. any ideas?
Click to expand...
Click to collapse
Which version? Another user reported that is working.
Edit: More details about your device?Which version do you have exactly?
the twrp_blanc_0.1.img
the dl-link of twrp_bkl_0.2.img is not working
kurvenmeister said:
the twrp_blanc_0.1.img
the dl-link of twrp_bkl_0.2.img is not working
Click to expand...
Click to collapse
Ok thank,link is fixed .but if the initial one didn't booted ,i don't think this will do.Which version of Honor 10 do you have (european,usa,etc)?I'm not sure it will work on the US version or any other version which is based on Oreo 8.1.
@Pretoriano80
dl-link worked. tried the second version of your recovery. still no success. it is hanging at the start screen. nothing else happend. european bkl-l09, resurrection remix, oreo 8.1
kurvenmeister said:
@Pretoriano80
dl-link worked. tried the second version of your recovery. still no success. it is hanging at the start screen. nothing else happend. european bkl-l09, resurrection remix, oreo 8.1
Click to expand...
Click to collapse
The custom rom might be the culprit!I didn't tested on custom roms.
Pretoriano80 said:
Ok thank,link is fixed .but if the initial one didn't booted ,i don't think this will do.Which version of Honor 10 do you have (european,usa,etc)?I'm not sure it will work on the US version or any other version which is based on Oreo 8.1.
Click to expand...
Click to collapse
Hey mate nice to see you here
Nice job with the recovery! I've been handed out an US View 10 a couple weeks ago (with Android 8.1 pre-release stuff), I'll test it out for you.
twrp-3.2.1-0-berkeley.img didn't boot on BKL-L04 (dark screen and reboot), but Ethan made some changes and twrp-3.2.1-1-berkeley.img does work fine.
I've been told that some selinux changes were needed to boot 8.1 stuff, some critical service that fails to run because it can't find the right policy, something related to recovery_vendor partition that runs it.
It will work in 8.0 setups also just fine.
I'll let you know how it goes :fingers-crossed:
Hope we get 8.1 kernel sources soon so I blu_spark this blue beauty
Rommco05 said:
I succesfuly make full backup (except data) and flashed busybox. I dont need decrypted data all seems to be fine. In backup section just missing OEM
Click to expand...
Click to collapse
Latest version should have Oeminfo available for backup! Did you tested that version?
eng.stk said:
Hey mate nice to see you here
Nice job with the recovery! I've been handed out an US View 10 a couple weeks ago (with Android 8.1 pre-release stuff), I'll test it out for you.
twrp-3.2.1-0-berkeley.img didn't boot on BKL-L04 (dark screen and reboot), but Ethan made some changes and twrp-3.2.1-1-berkeley.img did.
I've been told that some selinux changes were needed to boot 8.1 stuff, some critical service that fails to run because it can't find the right policy, something related to recovery_vendor partition that runs it.
It will work in 8.0 setups also jsut fine.
I'll let you know how it goes :fingers-crossed:
Click to expand...
Click to collapse
Hi! My favourite kernel developer is here, nice!
I have a guess on what may be wrong, but i'm not sure. Let me know if you figure out! [emoji6]
Latest TWRP changelog :
New features of 3.2.3-0:
Changelog)
Download Link - 64 bits version (non-treble)
twrp-3.2.3-0-64bits.img
Download Link - Treble version (64bits too)
twrp-3.2.3-0-treble.img
Working/Bugs
I have just tested on 16 GB variant and all seems to be working. If something is broken lemme know.
IMPORTANT NOTE :
At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Force encryption is enabled by default in stock OS and twrp will successfully decrypt /data at first boot if all goes well
If in case decryption doesn't go fine, twrp will popup a dialog box asking for password and that means decryption went wrong and you would need to wipe data once via twrp wipe options and reboot back to twrp for functioning of /data
Installation Guide
Make sure you have unlocked bootloader
Reboot to bootloader
fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary
boot)
XDA:DevDB Information
[Unofficial] TWRP 3.2.3-0 Moto G5, Tool/Utility for the Moto G5
Contributors
ZJRDroid
Source Code: Local manifests
Version Information
Status: Stable
Stable Release Date: 2019-01-18
Created 2019-01-18
Last Updated 2019-01-18
Thanks for the updated TWRP! Works like a charm
Are there any circumstances which would make it necessary to use the non-treble version?
image not signed or corrupted moto g 5 cedric. is this for cedric?
edit2: my friend used the fastboot boot recovery option the recovery booted and asked a password, then he pressed back and the other screen with the swipe button has appeares (allow system modifications) and now what to do? the sdcard folder doesn't have nothing inside, neither the external sd
update3: after requering the password he pressed back and then formatted the phone, phone booted into the stock rom, and the twrp is gone.
update4: tried install viperos cedric android 9.0.0 gave error 7 I don't know what to do twrp is working, he tried this https://www.youtube.com/watch?v=VCqROwIGLLE and now stock rom is gone. we are loosing hope ;-;
update 5: tried using the twrp provided by this guy https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737/page11 but nothing. still error 7 even doing the procedure above ^^
update 6: Forget everything you read, upthere^^^^ he downloaded the rom for a different phone XD
so anone tested any treble roms from the project forum on our phones with this twrp?
luigge said:
edit2: my friend used the fastboot boot recovery option the recovery booted and asked a password, then he pressed back and the other screen with the swipe button has appeares (allow system modifications) and now what to do? the sdcard folder doesn't have nothing inside, neither the external sd
Click to expand...
Click to collapse
What did he do exactly to avoid the password screen?
so...does this fix some of the issues present in the previous treble recovery? such as the camera not working? flashlight not working? crashes? can i use it as a daily driver?
I tried this ones. Camera working and no crashes, really stable.
[PORTED][semi-GSI][PPR2.181005.003][UNOFFICIAL]P sGSI PR2[A-ONLY]
......
[8.1][sGSI]MIUI10 for Project Treble
......
[9.0] [UNOFFICIAL] [ARM64 A-ONLY] AOSiP Pizza Alpha [EXPERIMENTAL] (Camera crashes but open camera works with videos)
.......
[GSI] OmniROM 8.1 [Unofficial] [ARM64]-[A-Only] [21.10.18]
Those i tested for like 1 hour and in this time everything works good. Iam staying with Omni cuz it feels uber fast and stable.
alright so here's a question: the lineage treble build to flash before the img is down, so where can i find a treble-ised rom to flash before the actual image?
fenerbuuh said:
I tried this ones. Camera working and no crashes, really stable.
[PORTED][semi-GSI][PPR2.181005.003][UNOFFICIAL]P sGSI PR2[A-ONLY]
......
[8.1][sGSI]MIUI10 for Project Treble
......
[9.0] [UNOFFICIAL] [ARM64 A-ONLY] AOSiP Pizza Alpha [EXPERIMENTAL] (Camera crashes but open camera works with videos)
.......
[GSI] OmniROM 8.1 [Unofficial] [ARM64]-[A-Only] [21.10.18]
Those i tested for like 1 hour and in this time everything works good. Iam staying with Omni cuz it feels uber fast and stable.
Click to expand...
Click to collapse
how'd you get the MIUI10 sGSI working on your phone? mine keeps rebooting into twrp
Links for both versions are down. Can you re-upload, please?
actuallynxthing said:
Links for both versions are down. Can you re-upload, please?
Click to expand...
Click to collapse
here
Both of these are not working for me.
All I get is the normal, stock recovery screen.
But yeah, do note that I had installed the 3.3 official which worked for just one boot. After that, I'm getting the stock recovery screen too.
---------- Post added at 04:58 AM ---------- Previous post was at 04:14 AM ----------
eljoantonyn said:
Both of these are not working for me.
All I get is the normal, stock recovery screen.
But yeah, do note that I had installed the 3.3 official which worked for just one boot. After that, I'm getting the stock recovery screen too.
Click to expand...
Click to collapse
Spoke too soon !
Got it working.
Now I need to see why it says "wrong password" while trying to decrypt.
Link fallen
Would you people kindly stop deleting your files from android file host, sick of broken links
Cloudane said:
Would you people kindly stop deleting your files from android file host, sick of broken links
Click to expand...
Click to collapse
I would use the 64bit twrp in the link below
It's not treble but then there's no stable treble roms for this device anyway (which is probably why this twrp is not maintained)
The following 64bit twrp will work with all 64bit custom roms
https://drive.google.com/open?id=1MLlljM7BzMj9Da57LeyBHyg81cHdW1cB
Treble version works good in XT 1670 (2GB 32GB). Some laggy gui, but good. Ty for your hard work!
He.Art said:
Treble version works good in XT 1670 (2GB 32GB). Some laggy gui, but good. Ty for your hard work!
Click to expand...
Click to collapse
If you want an never version use Jarl's TWRP - it works perfectly fine except if you encrypt backups (not the same as backing up encrypted data)
My phone just got the android 9 update, I already had installed root with twrp on my device with android 8.0
So when I tried to re-root my phone I needed to reinstall the TWRP but it couldn't decrypt the data
I tried all of the posible solutions to this but nothing
I think that is the TWRP version that can't decrypt data in android 9.0
But in the web isn't any version that support the Mi 8 LIte with Android 9.0
Do I need to wait until someone update the TWRP version or what can I do?
Thanks in advance
Sebaxe07 said:
My phone just got the android 9 update, I already had installed root with twrp on my device with android 8.0
So when I tried to re-root my phone I needed to reinstall the TWRP but it couldn't decrypt the data
I tried all of the posible solutions to this but nothing
I think that is the TWRP version that can't decrypt data in android 9.0
But in the web isn't any version that support the Mi 8 LIte with Android 9.0
Do I need to wait until someone update the TWRP version or what can I do?
Thanks in advance
Click to expand...
Click to collapse
Formatting data have to decrypt it, you have to be sure that TWRP is able to mount data partition.
SubwayChamp said:
Formatting data have to decrypt it, you have to be sure that TWRP is able to mount data partition.
Click to expand...
Click to collapse
So I need to erease all of my phone data to be able to use twrp? But why it didn't have this problem the first time?
Sebaxe07 said:
So I need to erease all of my phone data to be able to use twrp? But why it didn't have this problem the first time?
Click to expand...
Click to collapse
You are upgrading now; for this you need to decrypt it for first time and probably every time that you switch from a miui to an AOSP rom. Be sure that your data partition is mounted and I guess you can´t see the files under TWRP. Try first with this zip https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Stock Miui re-encrypt data on first boot after factory reset, so you need to flash Universal DM-Verity
I also need TWRP for pie.
Try this recovery, It has more features than TWRP https://sourceforge.net/projects/orangefox/files/test_builds/OrangeFox-R9.0-1-platina.zip/download
SubwayChamp said:
Try this recovery, It has more features than TWRP https://sourceforge.net/projects/orangefox/files/test_builds/OrangeFox-R9.0-1-platina.zip/download
Click to expand...
Click to collapse
Thanks
SubwayChamp said:
Try this recovery, It has more features than TWRP https://sourceforge.net/projects/orangefox/files/test_builds/OrangeFox-R9.0-1-platina.zip/download
Click to expand...
Click to collapse
Would you happen to know if opengapps aroma works with this recovery. I have tried 3 or 4 other revoveries and once options are selected and install starts recovery reboots. After that I have to hold power to force reboot because no matter what reboot option I choose it just goes back to recovery.
cidxtc said:
Would you happen to know if opengapps aroma works with this recovery. I have tried 3 or 4 other revoveries and once options are selected and install starts recovery reboots. After that I have to hold power to force reboot because no matter what reboot option I choose it just goes back to recovery.
Click to expand...
Click to collapse
Unfortunately I can't tell you for sure cause left 3 days to unlock my bootloader but I used this recovery in two Xiaomi devices (R5Plus and Mi Max) and was the best I ever tried, never had issue flashing Aroma zips.
Be sure that once finished the installation Reboot box in Aroma be unticked
SubwayChamp said:
Unfortunately I can't tell you for sure cause left 3 days to unlock my bootloader but I used this recovery in two Xiaomi devices (R5Plus and Mi Max) and was the best I ever tried, never had issue flashing Aroma zips.
Be sure that once finished the installation Reboot box in Aroma be unticked
Click to expand...
Click to collapse
Never had an issue with redmi note 4x and aroma either. The reboot box does not make a difference because the install never happens. I will download and try.
Sebaxe07 said:
I think that is the TWRP version that can't decrypt data in android 9.0
But in the web isn't any version that support the Mi 8 LIte with Android 9.0
Click to expand...
Click to collapse
If you are using the wzsx150 3.2.3 twrp found under the ROM/recovery section, versions 0121 and 0212 are both supposed to be for Android 9. I haven't tried myself though, as I am still on 8.
I can confirm version 0212 does indeed decrypt data partition, making it mountable it inside TWRP. Of course phone's now running on official Android 9 MIUI 10, updated on Wednesday.
So heads up for anyone trying to use open gapps aroma installer. No recovery will install it. Tried batik, orange fox, perp, and wzsx150 twrp and all do the same. After all the selections when the actual installation starts the device reboots (installs nothing but does save setting options) back to recovery. All reboot options (system, fastboot, etc) all reboot back to recovery only holding power button will allow device to boot into system.
MetallicGR said:
I can confirm version 0212 does indeed decrypt data partition, making it mountable it inside TWRP. Of course phone's now running on official Android 9 MIUI 10, updated on Wednesday.
Click to expand...
Click to collapse
I am using wzsx150 3.2.3-1003 and it does not decrypt data, even with proper password.. Where can I find 0212. I cannot find it in this forum. ..only the bad one I am using.
EDIT: Nevermind. Found it.
MetallicGR said:
I can confirm version 0212 does indeed decrypt data partition, making it mountable it inside TWRP. Of course phone's now running on official Android 9 MIUI 10, updated on Wednesday.
Click to expand...
Click to collapse
Any idea why is 0212 half the size of 0121, and the others for that matter (28MB vs 60MB).
I believe it's somehow compressed. If you open these files with something like 7zip you'll see the size is very close between the two.
MetallicGR said:
I believe it's somehow compressed. If you open these files with something like 7zip you'll see the size is very close between the two.
Click to expand...
Click to collapse
Oh okay. That would make sense.
lexridge said:
I am using wzsx150 3.2.3-1003 and it does not decrypt data, even with proper password.. Where can I find 0212. I cannot find it in this forum. ..only the bad one I am using.
EDIT: Nevermind. Found it.
Click to expand...
Click to collapse
Can yo share the 0212 img to Pie I'm stll in Oreo and the Pie update notification is a little annoying so I want to update but I haven't found the twpr 0212 for mi 8 lite.
Here you go. https://forum.xda-developers.com/showpost.php?p=78876979&postcount=46
Another member replied to your other thread as well.