[Recovery][BKL][EMUI 8.x only][Unofficial]TWRP 3.2.1-0 [14/04/2018] - Honor View 10 ROMs, Kernels, Recoveries, & Other D

Disclaimer​This software comes wth no warranty,XDA staff ,myself or TeamWin stuff can't be hold responsible for any damage it may cause to your device.
Note: Currently Oreo 8.1 custom roms are supported only on BKL-L04 with EMUI 8.1
Download and Installation​
* Download twrp recovery
* Start your device in fastboot mode
* Install the recovery using the following command:
Code:
fastboot flash recovery_ramdisk [name of the file].img --> ex: fastboot flash recovery_ramdisk twrp_blanc_0.1.img
* Restart with this command:
Code:
fastboot reboot
* As soon as you execute the restart command,remove the USB cable and keep pressing Volume UP,so the device will boot to TWRP.This is to avoid that the device boot to OS,overwritting TWRP recovery.
Features​
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Note: There are no sources for this yet,because is based on the work of @zxz0O0 ,from Honor 9 forum.
Credits
**** @zxz0O0 - This wouldn't be possible without this guy,so big big thank to him.I used his base to make this recovery work ,so in sign of respect his nick will also be on the TWRP boot screen.Thank again buddy!
**** TeamWin project ,obviously.
Download links
twrp_blanc_0.1.img - initial test release
twrp_bkl_0.2.img - OEMinfo partition is available for backup
twrp_bkl_0.3.img - /cache mounting is fixed,backup /vendor as image (vendor still can't be mounted)
twrp_bkl_0.4.img - /vendor mounting/unmounting is now fixed (thx @ante0 for the script)
twrp_bkl_0.5.img - mounting/unmounting issues shound be fixed , added a new option to exclude OEM path from wiping with Factory Reset and can be enabled/disabled in settings (thx Team OpenKirin for this), this version will work even with newer updates that bump security patch version.
twrp_bkl_0.6.img - Cache wiping issue is now fixed
twrp_bkl_0.7.img - fixed decryption on EMUI 8.1 (now you can use the same password/pin/pattern to decrypt in TWRP), /recovery_ramdisk no longer available for backup./vendor no longer available for backup (use /vendor_image instead),/system and /data can be unmounting issue with 8.1 devices is now fixed.

Pretoriano80 said:
Internal storage decryption = working
MTP and OTG connection = working
Backup&Restore = working
Click to expand...
Click to collapse
Thanks man! :laugh: Need to test this!

IcipherPT said:
Thanks man! [emoji23] Need to test this!
Click to expand...
Click to collapse
No problem! Please report back if it's working or not.

Pretoriano80 said:
No problem! Please report back if it's working or not.
Click to expand...
Click to collapse
wipe everything to decrypt?

ngoralph said:
wipe everything to decrypt?
Click to expand...
Click to collapse
Nope, just decrypting, like you do when your phone is starting and asks for PIN! [emoji6]

Pretoriano80 said:
No problem! Please report back if it's working or not.
Click to expand...
Click to collapse
Just tested on my honor view 10. It was asking for a password to decrypt. I entered my lockscreen pass and everything was decrypt.
so TWRP CAN decrypt

@youtuber123
did you try a nandroid backup?

youtuber123 said:
Just tested on my honor view 10. It was asking for a password to decrypt. I entered my lockscreen pass and everything was decrypt.
so TWRP CAN decrypt
Click to expand...
Click to collapse
Ok, so it's working!Great,please let me know if something it's broken (backup, restore, MicroSD mounting, etc).

Pretoriano80 said:
Ok, so it's working!Great,please let me know if something it's broken (backup, restore, MicroSD mounting, etc).
Click to expand...
Click to collapse
nandroid (backup and restore) is working
mtp is working too
and micro usb mounting is working
didn't tested to flash something using twrp

youtuber123 said:
nandroid (backup and restore) is working
mtp is working too
and micro usb mounting is working
didn't tested to flash something using twrp
Click to expand...
Click to collapse
There's not much stuff to flash for this device! [emoji16]

Good, finally a useful twrp....
Can we flash LOS using this now?

@Pretoriano80
tried your recovery at my view 10. flashed it via fastboot. had no success. your twrp is hanging at the start screen. tried to flash it via the twrp of dees_troy, the same result. recovery is not booting completely, remains at the twrp start screen. any ideas?

kurvenmeister said:
@Pretoriano80
tried your recovery at my view 10. flashed it via fastboot. had no success. your twrp is hanging at the start screen. tried to flash it via the twrp of dees_troy, the same result. recovery is not booting completely, remains at the twrp start screen. any ideas?
Click to expand...
Click to collapse
Which version? Another user reported that is working.
Edit: More details about your device?Which version do you have exactly?

the twrp_blanc_0.1.img
the dl-link of twrp_bkl_0.2.img is not working

kurvenmeister said:
the twrp_blanc_0.1.img
the dl-link of twrp_bkl_0.2.img is not working
Click to expand...
Click to collapse
Ok thank,link is fixed .but if the initial one didn't booted ,i don't think this will do.Which version of Honor 10 do you have (european,usa,etc)?I'm not sure it will work on the US version or any other version which is based on Oreo 8.1.

@Pretoriano80
dl-link worked. tried the second version of your recovery. still no success. it is hanging at the start screen. nothing else happend. european bkl-l09, resurrection remix, oreo 8.1

kurvenmeister said:
@Pretoriano80
dl-link worked. tried the second version of your recovery. still no success. it is hanging at the start screen. nothing else happend. european bkl-l09, resurrection remix, oreo 8.1
Click to expand...
Click to collapse
The custom rom might be the culprit!I didn't tested on custom roms.

Pretoriano80 said:
Ok thank,link is fixed .but if the initial one didn't booted ,i don't think this will do.Which version of Honor 10 do you have (european,usa,etc)?I'm not sure it will work on the US version or any other version which is based on Oreo 8.1.
Click to expand...
Click to collapse
Hey mate nice to see you here
Nice job with the recovery! I've been handed out an US View 10 a couple weeks ago (with Android 8.1 pre-release stuff), I'll test it out for you.
twrp-3.2.1-0-berkeley.img didn't boot on BKL-L04 (dark screen and reboot), but Ethan made some changes and twrp-3.2.1-1-berkeley.img does work fine.
I've been told that some selinux changes were needed to boot 8.1 stuff, some critical service that fails to run because it can't find the right policy, something related to recovery_vendor partition that runs it.
It will work in 8.0 setups also just fine.
I'll let you know how it goes :fingers-crossed:
Hope we get 8.1 kernel sources soon so I blu_spark this blue beauty

Rommco05 said:
I succesfuly make full backup (except data) and flashed busybox. I dont need decrypted data all seems to be fine. In backup section just missing OEM
Click to expand...
Click to collapse
Latest version should have Oeminfo available for backup! Did you tested that version?

eng.stk said:
Hey mate nice to see you here
Nice job with the recovery! I've been handed out an US View 10 a couple weeks ago (with Android 8.1 pre-release stuff), I'll test it out for you.
twrp-3.2.1-0-berkeley.img didn't boot on BKL-L04 (dark screen and reboot), but Ethan made some changes and twrp-3.2.1-1-berkeley.img did.
I've been told that some selinux changes were needed to boot 8.1 stuff, some critical service that fails to run because it can't find the right policy, something related to recovery_vendor partition that runs it.
It will work in 8.0 setups also jsut fine.
I'll let you know how it goes :fingers-crossed:
Click to expand...
Click to collapse
Hi! My favourite kernel developer is here, nice!
I have a guess on what may be wrong, but i'm not sure. Let me know if you figure out! [emoji6]

Related

TWRP not installing/Stuck on Stock Recovery after a Revert to Stock

Hello,
I've unlocked my bootloader and subsequently had installed TWRP (months ago).
Not long after, I decided to go back to stock for a while, and went back to CM a month ago.
However, I realized back then that I was loading into stock recovery even after taking the steps to install TWRP (http://forum.xda-developers.com/honor-5x/development/root-kiw-l24-usa-kiwi-t3305190)
During these steps, there were no errors (fastboot/adb logs show all things were done successfully).
However, some funky quirk (that I don't remember) got me loaded with TWRP once, which gave me the window to install CM (I remember it involving having to be connected to the PC).
Now I'm trying to install a new CM build, but I can't get it loading TWRP.
I've downloaded the TWRP Manager App, which tells me that I have TWRP 3.0.0.0, but when I reboot to recovery, I am given the stock EMUI recovery.
Does anyone know what is happening in this case? Has anyone experienced a similar issue?
Thank you!
undesputed said:
Hello,
I've unlocked my bootloader and subsequently had installed TWRP (months ago).
Not long after, I decided to go back to stock for a while, and went back to CM a month ago.
However, I realized back then that I was loading into stock recovery even after taking the steps to install TWRP (http://forum.xda-developers.com/honor-5x/development/root-kiw-l24-usa-kiwi-t3305190)
During these steps, there were no errors (fastboot/adb logs show all things were done successfully).
However, some funky quirk (that I don't remember) got me loaded with TWRP once, which gave me the window to install CM (I remember it involving having to be connected to the PC).
Now I'm trying to install a new CM build, but I can't get it loading TWRP.
I've downloaded the TWRP Manager App, which tells me that I have TWRP 3.0.0.0, but when I reboot to recovery, I am given the stock EMUI recovery.
Does anyone know what is happening in this case? Has anyone experienced a similar issue?
Thank you!
Click to expand...
Click to collapse
Reinstallt it try this TWRP http://www.mediafire.com/download/15g5i63gke9ddgp/kiwi_twrp_3-21_recovery.img its version 3.0.2.0 (Most recent)
The most recent is 5-14 (also based on v3.0.2.0 ).
TWRP 5.14
3-21 was built on March 21, and 5-14 on May 14.
mooms said:
The most recent is 5-14 (also based on v3.0.2.0 ).
TWRP 5.14
3-21 was built on March 21, and 5-14 on May 14.
Click to expand...
Click to collapse
Just for the record I'm using a even newer one than the 5-14 posted above
@yuweng posted a version of 3.0.2.0 that will make images of many partitions on the phone that even 5-14 ignores
you can download it here >> https://www.androidfilehost.com/?fid=24588212152305793
please note it was discovered early on that you cannot share the oeminfo partition on the phone, it's locked to your device and can / will brick a phone it's not from. just be careful what you restore with such a powerful version of TWRP.
@undesputed
I have seen this before where flashing TWRP does not seem to stick.
boot to the bootloader and see if frp is unlocked ... if not you need to
boot to your OS and remove your google account from the device
reboot to the bootloader and attempt the flash again. if it still fails to stick you can always just use
fastboot boot twrp.img and it will work just fine... just not installed
Arobase40 said:
Do you mean 3.0.2.0 is newer and supports more partitions than 5-14 ???
Click to expand...
Click to collapse
Their both 3.0.2.0 the one I just posted has more features
Sent from my SM-N920T using Tapatalk
clsA said:
Just for the record I'm using a even newer one than the 5-14 posted above
@yuweng posted a version of 3.0.2.0 that will make images of many partitions on the phone that even 5-14 ignores
you can download it here >> https://www.androidfilehost.com/?fid=24588212152305793
please note it was discovered early on that you cannot share the oeminfo partition on the phone, it's locked to your device and can / will brick a phone it's not from. just be careful what you restore with such a powerful version of TWRP.
@undesputed
I have seen this before where flashing TWRP does not seem to stick.
boot to the bootloader and see if frp is unlocked ... if not you need to
boot to your OS and remove your google account from the device
reboot to the bootloader and attempt the flash again. if it still fails to stick you can always just use
fastboot boot twrp.img and it will work just fine... just not installed
Click to expand...
Click to collapse
@clsA
frp is labeled as "UNLOCK" as oppsed to bootloader labeled as "UNLOCKED".
If it's just about removing my google account, will this be resolved the next time I do a factory reset?
Nevertheless, thank you so much for the command fastboot boot twrp.img, I realized that that was what I had used the last time.
I'm currently able to boot into TWRP this way. Awesome!
@clsA
Thanks for the link & infos.
Can you tell which features are added in this new TWRP ? name of the partitions ?
Thanks.
mooms said:
@clsA
Thanks for the link & infos.
Can you tell which features are added in this new TWRP ? name of the partitions ?
Thanks.
Click to expand...
Click to collapse
it would be much easier to just install it and test it for yourself
I did find a bug it would not backup to my OTG stick
clsA said:
it would be much easier to just install it and test it for yourself
I did find a bug it would not backup to my OTG stick
Click to expand...
Click to collapse
I don't use all the features, so i will maybe miss the changes.
Never used OTG to made a backup (I use ext_SD), I don't know if it works with other builds of TWRP.
mooms said:
I don't use all the features, so i will maybe miss the changes.
Never used OTG to made a backup (I use ext_SD), I don't know if it works with other builds of TWRP.
Click to expand...
Click to collapse
USB-OTG works flawlessly on the 5-14 version I was not able to use it with the newer one @yuweng posted in his guide
the screen shots show all the partitions it's able to work with
Arobase40 said:
I thought 3.0.2.0 was just an interim version between twrp_2-27 and twrp_5-14... ^^
Click to expand...
Click to collapse
your confusing TWRP versions with TWRP release dates
2-27 and 5-14 are release dates where as 3.0.2.0 is the version of TWRP not the date
the first version of TWRP for this device was actually 2.8.7.0 and was released on 2-16-2016
Same issue
Hey so I have the same exact issue umm did you ever resolve this problem becuSe I can't seem to crack it and it's a bit frustrating cuz by no means am I a pro but coming from using the OnePlus one the OnePlus 2 the OnePlus x and the Nexus 6 rooting them and restoring them after many failed attempts resulting in bricking my phone and even eventually unbrick them I do know a thing or two and I am stumped please help you are the only other person in this world other then my self that seems to be having this issue if you don't mind would you be so kind and email gmail me cuz I don't use or check this forum often thanks millerfamily805
clsA said:
Just for the record I'm using a even newer one than the 5-14 posted above
@yuweng posted a version of 3.0.2.0 that will make images of many partitions on the phone that even 5-14 ignores
you can download it here >> https://www.androidfilehost.com/?fid=24588212152305793
please note it was discovered early on that you cannot share the oeminfo partition on the phone, it's locked to your device and can / will brick a phone it's not from. just be careful what you restore with such a powerful version of TWRP.
@undesputed
I have seen this before where flashing TWRP does not seem to stick.
boot to the bootloader and see if frp is unlocked ... if not you need to
boot to your OS and remove your google account from the device
reboot to the bootloader and attempt the flash again. if it still fails to stick you can always just use
fastboot boot twrp.img and it will work just fine... just not installed
Click to expand...
Click to collapse
Can it be used with other honor devices?
Got my answer... Thanks...
Sent from my PLK-L01 using XDA Labs
It depend on the device

[Unofficial] [05.10.2017]TWRP 3.1.1-0 Moto G5 [cedric]

Unofficial TWRP 3.1.0-0 Moto G5 (cedric) ​
Latest TWRP changelog :
New features of 3.1.1-0 (adb backup, tweaked MTP startup routines and plenty of bug fixes - for full changelog)
Download Link
twrp-3.1.1-0-cedric.img
Working/Bugs
I have just tested on 16 GB variant and all seems to be working. If something is broken lemme know.
IMPORTANT NOTE :
At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Force encryption is enabled by default in stock OS and twrp will successfully decrypt /data at first boot if all goes well
If in case decryption doesn't go fine, twrp will popup a dialog box asking for password and that means decryption went wrong and you would need to wipe data once via twrp wipe options and reboot back to twrp for functioning of /data
Installation Guide
Make sure you have unlocked bootloader
Reboot to bootloader
fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary
boot)
XDA:DevDB Information
[Unofficial] TWRP 3.1.1-0 Moto G5, Tool/Utility for the Moto G5
Contributors
Santhosh M
Source Code: http://Using prebuilt stock kernel and hence no kernel source available
Version Information
Status: Stable
Stable Release Date: 2017-10-05
Created 2017-03-17
Last Updated 2017-10-05
Reserved
Reserved
Even though I have the plus variant, it's cool to see these features popping up.
Johny Cipeli said:
Even though I have the plus variant, it's cool to see these features popping up.
Click to expand...
Click to collapse
+1
Grt @Santhosh M
Santhosh M said:
Reserved
Click to expand...
Click to collapse
Gonna get that g5+ Bro? it would be awesome if you will be there for support too.
xt1670 model
Hi Santhosh
Will this TWRP work on Moto G5 model xt1670?
If so, can it be rooted using twrp temporary boot?
EDIT: I have tried this several time, I'm always getting stuck at boot, after the first data wipe, only solution is to install stock system again.
I have the Modem Version: M8937_8000.122.02.40R, 32GB
I'm offering to test
Thanks
Works fine for the most part, though reboot options Bootloader and Power Off doesn't work, just restarts normally.
XT1676
KawaiiNeko said:
Works fine for the most part, though reboot options Bootloader and Power Off doesn't work, just restarts normally.
XT1676
Click to expand...
Click to collapse
Plz share the procedure you had followed.
Did you able to achieve root access?
fAIyaZ said:
Plz share the procedure you had followed.
Did you able to achieve root access?
Click to expand...
Click to collapse
Unlocked bootloader, flashed twrp, factory reset, good to go. Sadly no root though.
KawaiiNeko said:
Unlocked bootloader, flashed twrp, factory reset, good to go. Sadly no root though.
Click to expand...
Click to collapse
Try phh su.
Flash it through twrp: https://superuser.phh.me/superuser.zip
Then installed the phh superuser app: https://play.google.com/store/apps/d....phh.superuser
fAIyaZ said:
Try phh su.
Flash it through twrp: https://superuser.phh.me/superuser.zip
Then installed the phh superuser app: https://play.google.com/store/apps/d....phh.superuser
Click to expand...
Click to collapse
worked perfectly! https://i.imgur.com/71G0cN2.png
I'll get my G5 16gb lunar grey tomorrow and can't wait to root
Thanks for testing out
Bootlooping
Hi guys, I got bootloop in my moto g5 after TWRP boot/install, should I open a new thread or somebody can help here?
linsspinho said:
Hi guys, I got bootloop in my moto g5 after TWRP boot/install, should I open a new thread or somebody can help here?
Click to expand...
Click to collapse
Depending on your phone version, you might need to flash system using fastboot.
KawaiiNeko said:
worked perfectly! https://i.imgur.com/71G0cN2.png
Click to expand...
Click to collapse
So i believe TWRP works as intended and root is also achieved via phh/whatever?
If all works fine for you would like you to make reply in the thread with detailed flashing instructions as i am not sure why few in thread have issues
can this version of twrp be used for POTTER version of moto G5 plus?
After installing TWRP my Phone stucks at the "Your device has been unlocked" screen. My system seems to be gone. I've downloaded the image from the other thread and tried to sideload it, but twrp says it's in the wrong format. TWRP boots fine
(Anyone who can upload a fully working NANDROID or sth like that?)
What can i do :/?
Edit: Solved. Unzipped the firmware and flashed manually via fastboot. Working fine!
But then again at the startup of the recovery, there's the encryption message. What to wipe now, that it'll work? Wiping /data ends in boot loop...
.sirhc said:
After installing TWRP my Phone stucks at the "Your device has been unlocked" screen. My system seems to be gone. I've downloaded the image from the other thread and tried to sideload it, but twrp says it's in the wrong format. TWRP boots fine
(Anyone who can upload a fully working NANDROID or sth like that?)
What can i do :/?
Edit: Solved. Unzipped the firmware and flashed manually via fastboot. Working fine!
But then again at the startup of the recovery, there's the encryption message. What to wipe now, that it'll work? Wiping /data ends in boot loop...
Click to expand...
Click to collapse
Did you tried wiping data, and formatting data? Remember that wiping /data is where your apps and settings are stored, and formatting /data/media is the massive storage... Maybe if you wipe both it would work
Enviado desde mi Moto G (5) Plus mediante Tapatalk
After
fastboot flash recovery twrp.img
I'm booting into recovery, cancel the encryption password verification, swipe to allow modification, wipe & format data -> Bootloop
Flashing system (and only system, not recovery etc) -> Phone boots normally, twrp ist gone ...
Greetings

[UNOFFICIAL] TWRP 3.2.3-0 [TREBLE][64bits]

Latest TWRP changelog :
New features of 3.2.3-0:
Changelog)
Download Link - 64 bits version (non-treble)
twrp-3.2.3-0-64bits.img
Download Link - Treble version (64bits too)
twrp-3.2.3-0-treble.img
Working/Bugs
I have just tested on 16 GB variant and all seems to be working. If something is broken lemme know.
IMPORTANT NOTE :
At first boot twrp will ask for "Swipe to allow modifications for /system" and if you choose to allow it system partition will get modified. So if you choose to reboot back to OS without performing anything in twrp, the OS won't boot (as verity check is enabled in stock OS/kernel) . To avoid this you have to flash either SuperSU or flash any of the verity disabler zips there in xda
Force encryption is enabled by default in stock OS and twrp will successfully decrypt /data at first boot if all goes well
If in case decryption doesn't go fine, twrp will popup a dialog box asking for password and that means decryption went wrong and you would need to wipe data once via twrp wipe options and reboot back to twrp for functioning of /data
Installation Guide
Make sure you have unlocked bootloader
Reboot to bootloader
fastboot flash recovery twrp-****.img (if you want permanent flash) or fastboot boot twrp-****.img (if you want temporary
boot)
XDA:DevDB Information
[Unofficial] TWRP 3.2.3-0 Moto G5, Tool/Utility for the Moto G5
Contributors
ZJRDroid
Source Code: Local manifests
Version Information
Status: Stable
Stable Release Date: 2019-01-18
Created 2019-01-18
Last Updated 2019-01-18
Thanks for the updated TWRP! Works like a charm
Are there any circumstances which would make it necessary to use the non-treble version?
image not signed or corrupted moto g 5 cedric. is this for cedric?
edit2: my friend used the fastboot boot recovery option the recovery booted and asked a password, then he pressed back and the other screen with the swipe button has appeares (allow system modifications) and now what to do? the sdcard folder doesn't have nothing inside, neither the external sd
update3: after requering the password he pressed back and then formatted the phone, phone booted into the stock rom, and the twrp is gone.
update4: tried install viperos cedric android 9.0.0 gave error 7 I don't know what to do twrp is working, he tried this https://www.youtube.com/watch?v=VCqROwIGLLE and now stock rom is gone. we are loosing hope ;-;
update 5: tried using the twrp provided by this guy https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737/page11 but nothing. still error 7 even doing the procedure above ^^
update 6: Forget everything you read, upthere^^^^ he downloaded the rom for a different phone XD
so anone tested any treble roms from the project forum on our phones with this twrp?
luigge said:
edit2: my friend used the fastboot boot recovery option the recovery booted and asked a password, then he pressed back and the other screen with the swipe button has appeares (allow system modifications) and now what to do? the sdcard folder doesn't have nothing inside, neither the external sd
Click to expand...
Click to collapse
What did he do exactly to avoid the password screen?
so...does this fix some of the issues present in the previous treble recovery? such as the camera not working? flashlight not working? crashes? can i use it as a daily driver?
I tried this ones. Camera working and no crashes, really stable.
[PORTED][semi-GSI][PPR2.181005.003][UNOFFICIAL]P sGSI PR2[A-ONLY]
......
[8.1][sGSI]MIUI10 for Project Treble
......
[9.0] [UNOFFICIAL] [ARM64 A-ONLY] AOSiP Pizza Alpha [EXPERIMENTAL] (Camera crashes but open camera works with videos)
.......
[GSI] OmniROM 8.1 [Unofficial] [ARM64]-[A-Only] [21.10.18]
Those i tested for like 1 hour and in this time everything works good. Iam staying with Omni cuz it feels uber fast and stable.
alright so here's a question: the lineage treble build to flash before the img is down, so where can i find a treble-ised rom to flash before the actual image?
fenerbuuh said:
I tried this ones. Camera working and no crashes, really stable.
[PORTED][semi-GSI][PPR2.181005.003][UNOFFICIAL]P sGSI PR2[A-ONLY]
......
[8.1][sGSI]MIUI10 for Project Treble
......
[9.0] [UNOFFICIAL] [ARM64 A-ONLY] AOSiP Pizza Alpha [EXPERIMENTAL] (Camera crashes but open camera works with videos)
.......
[GSI] OmniROM 8.1 [Unofficial] [ARM64]-[A-Only] [21.10.18]
Those i tested for like 1 hour and in this time everything works good. Iam staying with Omni cuz it feels uber fast and stable.
Click to expand...
Click to collapse
how'd you get the MIUI10 sGSI working on your phone? mine keeps rebooting into twrp
Links for both versions are down. Can you re-upload, please?
actuallynxthing said:
Links for both versions are down. Can you re-upload, please?
Click to expand...
Click to collapse
here
Both of these are not working for me.
All I get is the normal, stock recovery screen.
But yeah, do note that I had installed the 3.3 official which worked for just one boot. After that, I'm getting the stock recovery screen too.
---------- Post added at 04:58 AM ---------- Previous post was at 04:14 AM ----------
eljoantonyn said:
Both of these are not working for me.
All I get is the normal, stock recovery screen.
But yeah, do note that I had installed the 3.3 official which worked for just one boot. After that, I'm getting the stock recovery screen too.
Click to expand...
Click to collapse
Spoke too soon !
Got it working.
Now I need to see why it says "wrong password" while trying to decrypt.
Link fallen
Would you people kindly stop deleting your files from android file host, sick of broken links
Cloudane said:
Would you people kindly stop deleting your files from android file host, sick of broken links
Click to expand...
Click to collapse
I would use the 64bit twrp in the link below
It's not treble but then there's no stable treble roms for this device anyway (which is probably why this twrp is not maintained)
The following 64bit twrp will work with all 64bit custom roms
https://drive.google.com/open?id=1MLlljM7BzMj9Da57LeyBHyg81cHdW1cB
Treble version works good in XT 1670 (2GB 32GB). Some laggy gui, but good. Ty for your hard work!
He.Art said:
Treble version works good in XT 1670 (2GB 32GB). Some laggy gui, but good. Ty for your hard work!
Click to expand...
Click to collapse
If you want an never version use Jarl's TWRP - it works perfectly fine except if you encrypt backups (not the same as backing up encrypted data)

TWRP for Android 9 Pie?

My phone just got the android 9 update, I already had installed root with twrp on my device with android 8.0
So when I tried to re-root my phone I needed to reinstall the TWRP but it couldn't decrypt the data
I tried all of the posible solutions to this but nothing
I think that is the TWRP version that can't decrypt data in android 9.0
But in the web isn't any version that support the Mi 8 LIte with Android 9.0
Do I need to wait until someone update the TWRP version or what can I do?
Thanks in advance
Sebaxe07 said:
My phone just got the android 9 update, I already had installed root with twrp on my device with android 8.0
So when I tried to re-root my phone I needed to reinstall the TWRP but it couldn't decrypt the data
I tried all of the posible solutions to this but nothing
I think that is the TWRP version that can't decrypt data in android 9.0
But in the web isn't any version that support the Mi 8 LIte with Android 9.0
Do I need to wait until someone update the TWRP version or what can I do?
Thanks in advance
Click to expand...
Click to collapse
Formatting data have to decrypt it, you have to be sure that TWRP is able to mount data partition.
SubwayChamp said:
Formatting data have to decrypt it, you have to be sure that TWRP is able to mount data partition.
Click to expand...
Click to collapse
So I need to erease all of my phone data to be able to use twrp? But why it didn't have this problem the first time?
Sebaxe07 said:
So I need to erease all of my phone data to be able to use twrp? But why it didn't have this problem the first time?
Click to expand...
Click to collapse
You are upgrading now; for this you need to decrypt it for first time and probably every time that you switch from a miui to an AOSP rom. Be sure that your data partition is mounted and I guess you can´t see the files under TWRP. Try first with this zip https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Stock Miui re-encrypt data on first boot after factory reset, so you need to flash Universal DM-Verity
I also need TWRP for pie.
Try this recovery, It has more features than TWRP https://sourceforge.net/projects/orangefox/files/test_builds/OrangeFox-R9.0-1-platina.zip/download
SubwayChamp said:
Try this recovery, It has more features than TWRP https://sourceforge.net/projects/orangefox/files/test_builds/OrangeFox-R9.0-1-platina.zip/download
Click to expand...
Click to collapse
Thanks
SubwayChamp said:
Try this recovery, It has more features than TWRP https://sourceforge.net/projects/orangefox/files/test_builds/OrangeFox-R9.0-1-platina.zip/download
Click to expand...
Click to collapse
Would you happen to know if opengapps aroma works with this recovery. I have tried 3 or 4 other revoveries and once options are selected and install starts recovery reboots. After that I have to hold power to force reboot because no matter what reboot option I choose it just goes back to recovery.
cidxtc said:
Would you happen to know if opengapps aroma works with this recovery. I have tried 3 or 4 other revoveries and once options are selected and install starts recovery reboots. After that I have to hold power to force reboot because no matter what reboot option I choose it just goes back to recovery.
Click to expand...
Click to collapse
Unfortunately I can't tell you for sure cause left 3 days to unlock my bootloader but I used this recovery in two Xiaomi devices (R5Plus and Mi Max) and was the best I ever tried, never had issue flashing Aroma zips.
Be sure that once finished the installation Reboot box in Aroma be unticked
SubwayChamp said:
Unfortunately I can't tell you for sure cause left 3 days to unlock my bootloader but I used this recovery in two Xiaomi devices (R5Plus and Mi Max) and was the best I ever tried, never had issue flashing Aroma zips.
Be sure that once finished the installation Reboot box in Aroma be unticked
Click to expand...
Click to collapse
Never had an issue with redmi note 4x and aroma either. The reboot box does not make a difference because the install never happens. I will download and try.
Sebaxe07 said:
I think that is the TWRP version that can't decrypt data in android 9.0
But in the web isn't any version that support the Mi 8 LIte with Android 9.0
Click to expand...
Click to collapse
If you are using the wzsx150 3.2.3 twrp found under the ROM/recovery section, versions 0121 and 0212 are both supposed to be for Android 9. I haven't tried myself though, as I am still on 8.
I can confirm version 0212 does indeed decrypt data partition, making it mountable it inside TWRP. Of course phone's now running on official Android 9 MIUI 10, updated on Wednesday.
So heads up for anyone trying to use open gapps aroma installer. No recovery will install it. Tried batik, orange fox, perp, and wzsx150 twrp and all do the same. After all the selections when the actual installation starts the device reboots (installs nothing but does save setting options) back to recovery. All reboot options (system, fastboot, etc) all reboot back to recovery only holding power button will allow device to boot into system.
MetallicGR said:
I can confirm version 0212 does indeed decrypt data partition, making it mountable it inside TWRP. Of course phone's now running on official Android 9 MIUI 10, updated on Wednesday.
Click to expand...
Click to collapse
I am using wzsx150 3.2.3-1003 and it does not decrypt data, even with proper password.. Where can I find 0212. I cannot find it in this forum. ..only the bad one I am using.
EDIT: Nevermind. Found it.
MetallicGR said:
I can confirm version 0212 does indeed decrypt data partition, making it mountable it inside TWRP. Of course phone's now running on official Android 9 MIUI 10, updated on Wednesday.
Click to expand...
Click to collapse
Any idea why is 0212 half the size of 0121, and the others for that matter (28MB vs 60MB).
I believe it's somehow compressed. If you open these files with something like 7zip you'll see the size is very close between the two.
MetallicGR said:
I believe it's somehow compressed. If you open these files with something like 7zip you'll see the size is very close between the two.
Click to expand...
Click to collapse
Oh okay. That would make sense.
lexridge said:
I am using wzsx150 3.2.3-1003 and it does not decrypt data, even with proper password.. Where can I find 0212. I cannot find it in this forum. ..only the bad one I am using.
EDIT: Nevermind. Found it.
Click to expand...
Click to collapse
Can yo share the 0212 img to Pie I'm stll in Oreo and the Pie update notification is a little annoying so I want to update but I haven't found the twpr 0212 for mi 8 lite.
Here you go. https://forum.xda-developers.com/showpost.php?p=78876979&postcount=46
Another member replied to your other thread as well.

[SHARED] Xperia 5 II Twrp

https://mega.nz/folder/spBwXZoL#D1Wf8xLl1WacstfVnLnKhA
Any chance of some info on how to install?
TYIA.
what is this
Can you give a bit more details where you got this? Did you compile it? Was it pulled from another sony device? Do you have a github link?
Once again @M-Rom ! First TWRP for the Xperia 2019 Flagships and now the 2020 Series...
Same as for the Xperia 1 II:
-Download and extract the ZIP File to Your fastboot Location and rename it to recovery.img (for ease use)
-Use:
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
-Disconnect Your Device from USB and wait for it to turn off
-Press and hold VolumeDOWN & the Power Button together until You see the TWRP Logo (or use the reboot recovery option)
Miustone said:
Once again @M-Rom ! First TWRP for the Xperia 2019 Flagships and now the 2020 Series. Guide:
-Download and extract the ZIP
-Rename the file inside to boot.img
-fastboot flash boot_a boot.img
-fastboot flash boot_b boot.img
-Disconnect from USB and wait for the Device to run off
-Press and hold VolumeDOWN together with the Power Button
-TWRP should Start (in Chinese again!? lol)
Happy testing!
You can join My Discord Server if You need help with that... Ask Jayram which has successfully booted and used TWRP on his Xperia 5 II
MOD EDIT: Link removed, please read the STICKY!
Click to expand...
Click to collapse
Tried these steps and it worked perfectly, it is in chinese by default.
Updated My Instructions since 2020 Xperia Devices have a seperated recovery partition against the boot image/ramdisk ones on the older Devices. That's a huge win for Android Devices! Happy flashing Dear MARK II Users!
This installs successfuly, but it's kind of useless with the storage encryption. I tried wiping, but after restarting the device it becomes encrypted again. You need to change the language every time too. Is there any way to keep the internal storage decrypted? like the disabler .zip for samsung devices?
palamosteliaro said:
This installs successfuly, but it's kind of useless with the storage encryption. I tried wiping, but after restarting the device it becomes encrypted again. You need to change the language every time too. Is there any way to keep the internal storage decrypted? like the disabler .zip for samsung devices?
Click to expand...
Click to collapse
Doesn't TWRP support decrypting? On my previous devices it wasn't a problem, I never had an urge to decrypt the device.
Nezorflame said:
Doesn't TWRP support decrypting? On my previous devices it wasn't a problem, I never had an urge to decrypt the device.
Click to expand...
Click to collapse
Different TWRPs support different features. To get this one to support decrypting it will have to be worked on by the dev.
Unfortunately the internal storage decryption is broken since the December security patch update (58.0.A.28.51)...
OhayouBaka said:
Unfortunately the internal storage decryption is broken since the December security patch update (58.0.A.28.51)...
Click to expand...
Click to collapse
I recently got a 5 ii, currently on 58.0.A.10.3 and received 58 0.A.28.51 update notification. Should I not update if I want root?
mtshure said:
I recently got a 5 ii, currently on 58.0.A.10.3 and received 58 0.A.28.51 update notification. Should I not update if I want root?
Click to expand...
Click to collapse
You can still update if you want root via Magisk, but you will need to patch the boot img instead of flashing the Magisk zip in TWRP.
That would be soooo great to get TWRP or OrangeFox for Xperia 5 ii turning on Android 12!
Yoannjap said:
That would be soooo great to get TWRP or OrangeFox for Xperia 5 ii turning on Android 12!
Click to expand...
Click to collapse
Soon
King081 said:
Soon
Click to expand...
Click to collapse
No... Really?
But untill when could we hope for that?
Whoever is trying to adapt OrangeFox for X5ii_A12... Thanks a million!
Yoannjap said:
No... Really?
But untill when could we hope for that?
Whoever is trying to adapt OrangeFox for X5ii_A12... Thanks a million!
Click to expand...
Click to collapse
Yeah I'm being serious, we have it in private testing currently
Can somebody please confirm both recoveries (twrp / orangefox) currently available for (x5ii / pdx206 / XQ-AS52) only work on android 11 or prior? I tried both and they bootloop.
go0 said:
Can somebody please confirm both recoveries (twrp / orangefox) currently available for (x5ii / pdx206 / XQ-AS52) only work on android 11 or prior? I tried both and they bootloop.
Click to expand...
Click to collapse
Yes it will not work, new one will be out real soon
m

Categories

Resources