My phone model is Micromax Knight 2 E471.
It was working fine but it all happened all of a sudden. I was trying to connect my phone to the computer to access some file. Suddenly, I got a message on my screen that Encryption interrupted with some text and a button to reset. I rebooted the phone but it had the same message and I had no option but to click on the Reset button. From that time until now... it does not want to boot.
Then I searched for it on google and tried to start with two key combinations Power+VolumeUp and Power+VolumeDown. Power+VolumeDown. does not do anything but Power+VolumeUp get me to a recovery screen that says failed to mount /system, /sdcard, /cache and so many things (screenshot attached).
From the recovery option, I tried
1. wipe data/factory reset - doesnt do anything
2. wipe cache partition - doesnt do anything
Then I took it to Micromax service center. They said, OS needs to be reloaded. I paid 250/- and got it reloaded but still the issue was not resolved. Now there is a new problem. When I start the phone, it appears that it is rebooting but there is absolutely nothing on the screen. The screen is completely blank and black. The strange part is that, it keep vibrating after every minute or so which makes me feel that it is caught in a boot loop but nothing is displayed on the screen. The Service center guys says that there could either be a display issue or motherboard issue and in both cases, the hardware cost would be more. But I feel it is a software issue.
I again googled it and got to a page https://firmwarefile.com/micromax-e471 where I downloaded the firmware. The firmware folder had a file "8939_fastboot_all_images" which is a windows batch file. I installed the driver, executed the 8939_fastboot_all_images batchfile and went to the recovery screen I got from Power+VolumeUp key combination. Selected reboot to bootloader. I got lot of things in the ms-dos window but still the problem is unresolved.
I appreciate if someone here could help me what to do next.
Thanks
Something wrong with the mount points, maybe? Have you tried flashing a custom recovery like TWRP?
Adithya FRK said:
Something wrong with the mount points, maybe? Have you tried flashing a custom recovery like TWRP?
Click to expand...
Click to collapse
I cannot do anything with a screen with no display.
Can you tell me how to flash a custom recovery when the phone is in boot loop
Thanks
Your phone seems to have a Snapdragon SOC. Sorry but I'm pretty much useless with that. If it was an mtk you could have removed the battery and use SP Flash tool. Maybe someone else can help you with this.
Good luck.
bump
ACFH said:
First, dont post something like "bump", you can get ban.
2nd, if you cant flash, this tool may have. https://forum.xda-developers.com/showpost.php?p=71705583&postcount=5
This is only one tool can flash rom in this situation. If it not work, it could be hardware issue, not software.
Edit: after install qualcomn usb driver, make sure your phone is turn off, hold volume down button while plug usb cable (some phone need volume up, some need both of them, some doesnt need any button). Remember dont touch power button. If pc detect your phone like Qualcomm HS-USB QDLoader, you can using emmc.
Click to expand...
Click to collapse
Sorry for that!
First of all ToolStudio eMMC Download Tool link does not work. I downloaded the 50MB+ zip file and extracted, it asks for a password which I already put but it doesnt do anything.
Then I downloaded a downgraded version from here https://drive.google.com/drive/folders/0B7SVwjaFGLv_by1OSlMtaU9tQVE but it does not work. mMMC Download or Multil Download does not show RAM, Boot Image etc. The comments on that page also shows that there are so many people who are unable to do it. Do you know of a reliable download source for ToolStudio eMMC Download Tool?
Or do you have any other solution?
Thanks
AM also facing that problem with e471
Always showing flashing successfully .
But booting into recovery mode..
Need solution dear
Related
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
costeph said:
Hello, after playing with my z90 (with the original rom that was Z90a40_USR_S118 international, bought in october 2015) I wanted to clean it up and make some updates. So I made my backups etc... Entered the recovery (not the green lenovo one wich is very limited) with hold vol - , I choosed to wipe (the phone was encrypted just to mention) all that I can and reset to factory, all was done but when it finished, it reboot and it stuck to initializing just after lenovo logo it reboot... initializing... and it s an inifinite loop. So I retryed to go to the maintenance recovery but it s not possible a black screen come and it reboot, I can go to the limited lenovo green recovery, but no factory reset, so I make the wipe datas etc... nothing... infinite reboot loop!
So I found some rom put them in the micro SD, go for an update.zip with the recovery, update work well but... initializing.... reboot...
Grrr, lenovo... So I take the big tools, installed a minimal win7 with qualcom drivers, lenovo ones, qpst. I tried many manipulation to enter the download mode with port com (I finaly managed multiple times with not the exact manipulation it s vol- + power + 10s and multiple spanning of the vol - button....) And I have succefully flashed multiple roms with qfil but with always the same results... initializing, reboot... I don t know where to search now, I someone can help me to find where to go, perhaps reflashing the recovery or I saw the .qnc in a russian forum but I can t understand one word.... 2 days of flashing make me hate my lenovo, my first brick with a phone . Any help?
Thanks,
sorry for my bad english
Steph
Click to expand...
Click to collapse
Hi,
here is my solution if can help.
I had on my vibe shot s208 rooted ROW. It stacked after SU update in boot loop.
1. I did wipe data without formatting from recovery mode (Vol+ and Vol- and Power button. When Logo is on release power button and hold Vol+ and Vol - until you are in recovery mode). STILL boot loop.
2. I did wipe data with formatting from the same menu. - STILL boot loop.
3. I did factory reset from recovery menu (Vol - and Power after logo is on release Power and hold Vol - until you get recovery mode) - STILL boot loop.
Then I did next:
1. I downloaded and installed QFIL (QPST_2.7.422) - I am not allowed to post links yet.
2. I have connected OTG adapter to phone. Phone was off.
3. then connected OTG to PC. It was some HDD activities but I did not hear any sound.
4. press Vol- for as long as something is going on - HDD activities. Then I think came up sound too - but not sure.
5. I had installed Qualcomm USB drivers from before I suppose.
6. Because I couldn't see my device as ...908 I disconnected and connected again usb cable... then I got my device as ...908 in device manager, but it was written "RECONNECTED" or similar in front of word "QUALCOM".
7. Then just follow instructions for QFIL. and ROM will be installed.
First I have installed INTERNATIONAL no root ROM. But because I needed phone to be rooted in order to use data recovery software I flashed again with s240 ROOTED. When I flashed second time I did not use OTG, just direct usb cable connection to PC, and my phone was again recognized after I reconnected usb cable and in device manger was "RECONNECTED" in front of word "QUALCOM".
Hello, thanks for replying. But I already tried all the roms with qfil, they were successfully installed as wtih miflash but I always got a initializing boot loop... Unfortunately I tried some other method, I successfully erase all partitions, I m now in 9006 mode with a long vibration on start and I cant do anything now No flashing works anymore... I ll try some stuff when I had a little time.
did you find a solution ?? , cause I have the same problem ... tried everything, adb or cwm recovery won't work cause my device is not rooted nor the usb debugging is on .. so am stuck with this "initializing loop".. flashing didn't solve it for me, I tried every ROM I could find, rooted or not .. nothing .... this problem happened with my phone after wiping user data and trying to restore QCN, cause before this problem I had another one with network services, tried to solve it, and here I am, from bad to worse
Hello,
I had the same problem. I tried with QFile and MiFlash but unfortunately without success. will you a track ?
I reinstalled the drivers QDLoader HS- USB Driver. I maintained volume + for 3 seconds , however, nothing happens ! (Before it worked ) I also tried adb reboot eld the prolème is the USBport phone is not known !
I followed the procedure of DejXDA carefully until the end staying press the VOL- the phone starts to recharging battery ... have you others sollutions ? thanks in advance.
Hey there !
Same problem for me... The solution may be to rebuild the partition table, but we need a working phone, and a backup with QPST.
Would anyone post a *.qcn file from his phone, made with QPST Software Download ? or a *.hex ?
And the user partitions ? Or a factory image (*.mbn) ?
Any gurus here, what would you advise for that problem ? Would using QPST properly work ?
Cheers !
Z90-7 (Z90a40) unbricked (at last...)
Hello!
After days and days of fails, my Z90-7 is unbricked!
How?
Just follow the OTG cable method, but copy in the SD card, in the sdfuse folder, this image:
Z90a40_S209_150716_ROW.qsb
You can download it from russian forum*, freely.
*I'm not allowed to post links, but enter the exact reference (Z90a40_S209_150716_ROW.qsb) in Google search (don't accept the Google's proposition to correct it), the link is the first answer. Use Google trad as I did if you don't speak russian .
Hello ,
I have a Lenovo vibe shot Z90-7
I wanted to set an international Rom 5.1 and now since it gets stuck on initializing indefinitely.
I have access to the recovery mode so I spend not to turn off the phone.
I Agency will proceed as this I put out the létélphone I press the volume + and I connect it to the ordidateur to put in download mode, but there is nothing after it launches in initializing .
So I essyer with presses of flight - and connects to the PC and it remains on the Lenovo logo.
In prériphérique manager there wrote lenovo ADB android.
Can not have Qualcomm hs -usb in the Port . even after installing the driver.
you have an idea what I can do?
Thank you
z90-7 not working
Hi,
i tried to install 20150619_VIBEUI_V2.5_1525_5.404.1_ST_Z90-7-Root_Phoenix rom on my lenovo vibe shot using Qfil , After Qfil finished flashing the mobile shutdown and It does not turn on anymore
and computer does not recognize it anymore.
what can I do??
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
crandroid99 said:
I'm not a n00b, I've rooted every Android device I've ever had, and I have my OnePlus Two running the latest CM14.1 nightlies. But I can not figure out what to do for this poor tablet.
I had downloaded and installed an OTA from Lenovo, but it must have been corrupt because the tablet got stuck in a boot loop. I can boot into recovery, so I tried formatting it and clearing all the caches, then it goes to a screen with a loading bar, which fills completely and just sits there. I've left the thing on all night. Nothing.
Sending it to Lenovo is a no-go because I voided the warranty when I rooted it.
I've also tried reinstalling the stock firmware, but the Intel phone flash tool either get's blocked by Windows 10 (with no way to whitelist it) or fails to flash properly.
Click to expand...
Click to collapse
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
Can someone please guide my through this? I'm so confused
Click to expand...
Click to collapse
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
xaocot said:
what did it says the update would do? android 6.0? latest update for this tablet was released 7 months ago... the unlock tool u mentioned unlocks the bootloader, and try to find a win7 pc to do the flashing. some users on a different forum stated that windows 10 will cause problems during flashing
good luck
Click to expand...
Click to collapse
This update was seven months ago. It did not claim to bring 6.0, just minor fixes.
Thank you for clearing that up, now I just have to figure out how to download and use it xD.
Also I have figured out how to enable the hidden administrator account in Win10 and use that to get around the security warning, still tries to boot partway through flashing. Unless there's some other part of Win10 that's disagreeing with it.
Sent from my ONE A2005 using Tapatalk
the same problem with me!
crandroid99 said:
What I've tried:
Just plain booting it - screen turns on and doesn't do anything, just black
Rebooting through recovery (power + vol_up) - plays boot animation, goes to a screen with a loading bar like it does after an update, but once the bar fills, a white line appears at the top of the screen and nothing happens
Downloading the official KitKat firmware (http://forum.xda-developers.com/android/help/lenovo-tab-s8-50f-stock-firmware-rom-t2989791), unarchiving the rar file and rearchiving it into a .zip, putting it on a MicroSD card, putting the card in the tablet, flashing through recovery - can't find the .zip, says SD card is blank
Clearing caches and wiping data - same as when rebooting through recovery
Using the Intel phone flash tool through bootloader (power + vol_down) - tool can't find device
Using the same tool through fastboot (power + vol_up + vol_down) - gets to the sleep 4000 ms step, reboots the device, then the device goes to the same loading screen and the flash tool can't contact it. I think it's trying to boot into the OS to finish the flash, but that's the problem to begin with
I've tried loading the temporary CWM session but that fails
I can't for the life of me figure out what the @bailka011 Unlock Tool is supposed to do or how to use it, plus the download link isn't working.
plz someone too guide me ,the same problem is happening but there is no appearance of a loading screen,when i switch on the tab ,it showws the lenova logo and goes to a black screen thats keeps on flahsing!! i dont knwo what to do ,when i connect to pc and try to flash it doesnt work,i dont what to do plz help me!!
Click to expand...
Click to collapse
Hello All
I find myself in a desperate situation.
I have rebooted to ffbm mode by mistake and my phone will not start.
I have just the white start screen with the wilefox logo...it does not get passed this.
I could do with some urgent help if there is anyone out there?...
Thanks
Update....I'm out of it...thank god...if anyone else finds themselves here then volume down and power button for a few seconds. Then you find yourself in the recovery mode where you can select reboot using the volume keys to navigate up/down. Rebooting then worked. What a relief!
mitchw1971 said:
Hello All
I find myself in a desperate situation.
I have rebooted to ffbm mode by mistake and my phone will not start.
I have just the white start screen with the wilefox logo...it does not get passed this.
I could do with some urgent help if there is anyone out there?...
Thanks
Update....I'm out of it...thank god...if anyone else finds themselves here then volume down and power button for a few seconds. Then you find yourself in the recovery mode where you can select reboot using the volume keys to navigate up/down. Rebooting then worked. What a relief!
Click to expand...
Click to collapse
Not working for me , help please ???, I had just unlocked my tab bootloader and flashed twrp recovery but instead of booting inyo recovery I booted into ffbm mode by pressing power mode , you are the only one who can help me please ??
I don't like to leave you high-and-dry...but I moved on from this phone already 3 years ago and its a distant memory.
All I can suggest is trying combinations of the buttons like. vol+ & vol- at the same time then press power and hold all 3 buttons.
Also on previous phones where I messed about and nearly killed the thing I found that holding the power button for AGES would eventually wake it up. It may be a waste of time but on occasions I found that just doing the same thing over and again eventually brought a result (although this is said to be the first sign of madness...so careful with that). Good luck with your endeavour...been there many times :S
mitchw1971 said:
I don't like to leave you high-and-dry...but I moved on from this phone already 3 years ago and its a distant memory.
All I can suggest is trying combinations of the buttons like. vol+ & vol- at the same time then press power and hold all 3 buttons.
Also on previous phones where I messed about and nearly killed the thing I found that holding the power button for AGES would eventually wake it up. It may be a waste of time but on occasions I found that just doing the same thing over and again eventually brought a result (although this is said to be the first sign of madness...so careful with that). Good luck with your endeavour...been there many times :S
Click to expand...
Click to collapse
May be I was wrong before that it is because of ffbm but here is the thing with which I had just suffered ... Yesterday just thought to go and unlock the device and root it with magisk, but when I booted into twrp , I found the twrp wasn't showing the device internal storage , so I searched on youtube and found that formatting data will help so I just did that rebooted again in twrp and it did work but while wiping other stuffs such as dalvik, cache , I accidentally wiped the system so I end up getting a lenovo tab 4 10 which can't boot anymore, And one more stuff is that my device is dm verity which is a biggest headache for me , I had almost 5 samsung phones and all rooted easily but the procedure of lenovo and their support is worst, I had decided to never go with any lenovo product in future but also can't waste my money on that tab : (
Btw ... Coming back to the topic while navigating to the device forum I found the o.p. has posted a system sparse image which can be used to restore the system but even after restoring it my device is not booting up only lenovo logo is popping up and then into fastboot mode, sadly there is no custom roms available for this device as I had also thought to flash the firmware using the guide but I am totally confused and scared about to not to do anything which will hard brick this device, I am still able to boot into recovery which I think is a strange think because after flashing sparse image it should be replaced by the stock recovery file, but as described no booting into system, I tried contacting in the xda forum but no one is replying , I even tried sending pm to the o.p. but no response .
I am conpletely newbie in this fastboot devices and the lack of support just sucks ,thanks for reading this and replying me if you have any suggestion from your previous experience then free fell to tell.
Akash23q2 said:
May be I was wrong before that it is because of ffbm but here is the thing with which I had just suffered ... Yesterday just thought to go and unlock the device and root it with magisk, but when I booted into twrp , I found the twrp wasn't showing the device internal storage , so I searched on youtube and found that formatting data will help so I just did that rebooted again in twrp and it did work but while wiping other stuffs such as dalvik, cache , I accidentally wiped the system so I end up getting a lenovo tab 4 10 which can't boot anymore, And one more stuff is that my device is dm verity which is a biggest headache for me , I had almost 5 samsung phones and all rooted easily but the procedure of lenovo and their support is worst, I had decided to never go with any lenovo product in future but also can't waste my money on that tab : (
Btw ... Coming back to the topic while navigating to the device forum I found the o.p. has posted a system sparse image which can be used to restore the system but even after restoring it my device is not booting up only lenovo logo is popping up and then into fastboot mode, sadly there is no custom roms available for this device as I had also thought to flash the firmware using the guide but I am totally confused and scared about to not to do anything which will hard brick this device, I am still able to boot into recovery which I think is a strange think because after flashing sparse image it should be replaced by the stock recovery file, but as described no booting into system, I tried contacting in the xda forum but no one is replying , I even tried sending pm to the o.p. but no response .
I am conpletely newbie in this fastboot devices and the lack of support just sucks ,thanks for reading this and replying me if you have any suggestion from your previous experience then free fell to tell.
Click to expand...
Click to collapse
Maybe you have this fixed by now.. I searched around a bit about this and found this:
https://blogthetech.com/flash-file-lenovo-tab-4-10-tb-x304l-firmware-download-stock-rom/
Only one step I'm unsure about and that is "You will need to power off your device and connect it to the PC while off."
On my Wileyfox device (different device, I know) I need to power off and then press and hold all buttons (power, vol +, vol -) until device vibrates and gives a blank screen/no screen, this is how to boot into EDL mode on my device.
Your device maybe works differently, try both ways.
This is probably the best way of unbricking your tablet and here is the firmware file you need:
TB-X304L (WiFi and LTE)
TB-X304F (WiFi only)
Do I understand you correctly that you also have a dm-verity check issue?
For that you need to be booted up and have USB debugging on, tablet connected to pc and you type in this command:
Code:
adb reboot "dm-verity enforcing"
It will reboot and dm-verity check should by then be fixed.
RavZ75 said:
Maybe you have this fixed by now.. I searched around a bit about this and found this:
https://blogthetech.com/flash-file-lenovo-tab-4-10-tb-x304l-firmware-download-stock-rom/
Only one step I'm unsure about and that is "You will need to power off your device and connect it to the PC while off."
On my Wileyfox device (different device, I know) I need to power off and then press and hold all buttons (power, vol +, vol -) until device vibrates and gives a blank screen/no screen, this is how to boot into EDL mode on my device.
Your device maybe works differently, try both ways.
This is probably the best way of unbricking your tablet and here is the firmware file you need:
TB-X304L (WiFi and LTE)
TB-X304F (WiFi only)
Do I understand you correctly that you also have a dm-verity check issue?
For that you need to be booted up and have USB debugging on, tablet connected to pc and you type in this command:
It will reboot and dm-verity check should by then be fixed.
Click to expand...
Click to collapse
Thanks for your effort, I had fixed my tab a week before by flashing the stock firmware but can you tell me what is the use of that dm verity commond.
And yes my tab is dm verity.
Akash23q2 said:
Thanks for your effort, I had fixed my tab a week before by flashing the stock firmware but can you tell me what is the use of that dm verity commond.
And yes my tab is dm verity.
Click to expand...
Click to collapse
I should've given it another read, you have headache over dm-verity cause you want to root your device with custom recovery and stuff like that. This command line will not do you anything, not anything you want anyways.
On a Wileyfox Swift 2 device there was an bad uptade that made dm-verity check fail, this command was used to "reset" dm-verity. I assumed you had a similar issue but now I'm sure yours is a different kind of issue.
You would probably want to find a way of disabling dm-verity on your device.
Made one search for it and found this:
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
If it is only root you want you could get it with Magisk without flashing a custom recovery, you need the boot image of your device and you patch it with Magisk.
Then you flash the patched boot.img to your device. I believe this way works around dm-verity so is why I mention it.
https://www.droidwin.com/patch-stock-boot-image-flash-magisk/
Akash23q2 said:
May be I was wrong before that it is because of ffbm but here is the thing with which I had just suffered ... Yesterday just thought to go and unlock the device and root it with magisk, but when I booted into twrp , I found the twrp wasn't showing the device internal storage , so I searched on youtube and found that formatting data will help so I just did that rebooted again in twrp and it did work but while wiping other stuffs such as dalvik, cache , I accidentally wiped the system so I end up getting a lenovo tab 4 10 which can't boot anymore, And one more stuff is that my device is dm verity which is a biggest headache for me , I had almost 5 samsung phones and all rooted easily but the procedure of lenovo and their support is worst, I had decided to never go with any lenovo product in future but also can't waste my money on that tab : (
Btw ... Coming back to the topic while navigating to the device forum I found the o.p. has posted a system sparse image which can be used to restore the system but even after restoring it my device is not booting up only lenovo logo is popping up and then into fastboot mode, sadly there is no custom roms available for this device as I had also thought to flash the firmware using the guide but I am totally confused and scared about to not to do anything which will hard brick this device, I am still able to boot into recovery which I think is a strange think because after flashing sparse image it should be replaced by the stock recovery file, but as described no booting into system, I tried contacting in the xda forum but no one is replying , I even tried sending pm to the o.p. but no response .
I am conpletely newbie in this fastboot devices and the lack of support just sucks ,thanks for reading this and replying me if you have any suggestion from your previous experience then free fell to tell.
Click to expand...
Click to collapse
Search on how to flash system with adb interface.
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.