[ROM][AOSP][7.1/8.1/9.0 BETA] Unlegacy Android Project - Nexus 4 Original Android Development

The Unlegacy Android Project​Introduction
Unlegacy Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy Android was born. In our opinion, these ROMs are how the official updates would look.
On top of AOSP, we only include changes which are necessary to support the hardware, be secure, and get acceptable performance. Current features for mako include:
- Linux kernel 3.4.y merged in (currently 3.4.113 - mostly security patches and minor bug fixes)
- BFQ IO scheduler (official kernel 3.4 release), set up so GUI processes have the highest priority
- F2FS support from kernel 4.9 (for /data only! no point of f2fs on /cache)
- SELinux in Enforcing mode
Installation
If you're planning to install GApps, be sure to read the second post!
Aside from that, installation and upgrading is no different than on other ROMs.
Problems
- No known issues for mako yet.
If you notice anything, be sure to report it in this thread. Stability is our main concern. While I'm kind of busy, I usually read the thread and acknowledge the bug reports, even if I don't reply directly to them.
Downloads
See: http://builds.unlegacy-android.org. Our automated builds ensure that we always have the latest Android security patches merged in, without having to manually start and upload builds
We will have a built-in OTA updater (just like stock) soon (it's a work in progress)
Features?
There isn't much to say here - this is AOSP, if you install GApps, you pretty much get the same thing that's running on the Nexus devices (see the second post). The aim of this project is to create a fast and stable ROM - although, one could use Xposed (or similar) to add extra features.
As usual, feedback is appreciated
XDA:DevDB Information
Unlegacy Android Project, ROM for the Google Nexus 4
Contributors
Ziyan, amaces
Source Code: https://github.com/Unlegacy-Android
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 7.1.2
Current Beta Version: 8.1
Created 2017-04-10
Last Updated 2018-09-04

Reserved
GApps
If you want to install GApps, we recommend Open GApps Micro.
An important note: as this is a pure AOSP ROM, installing GApps tends to be problematic: in order to try to avoid installation issues, be sure to install GApps immediately after installing the ROM, before booting the system for the first time. If you experience any issues with the Google applications, be sure to go into Settings -> Apps, and grant every permission to every Google application - most importantly, Google Play services.
In the case of an upgrade, be sure to re-install the GApps package, as upgrading wipes /system. You shouldn't need to re-set the permissions afterwards.
Stock-like setup
Disable the following built-in (AOSP) apps:
- Android keyboard (once you installed Gboard)
- Browser
- Calculator
- Camera
- Clock
- Email
- Gallery
Install the following apps from the Play store:
- Google Photos (https://play.google.com/store/apps/details?id=com.google.android.apps.photos)
- Calculator (https://play.google.com/store/apps/details?id=com.google.android.calculator)
- Chrome (https://play.google.com/store/apps/details?id=com.android.chrome)
- Clock (https://play.google.com/store/apps/details?id=com.google.android.deskclock)
- Gboard (https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin)
- Gmail (https://play.google.com/store/apps/details?id=com.google.android.gm)
- Google Calendar (https://play.google.com/store/apps/details?id=com.google.android.calendar)
- Google Camera (https://play.google.com/store/apps/details?id=com.google.android.GoogleCamera)
SafetyNet
The ROM should pass SafetyNet after installing GApps, without anything else. Keep in mind that installing extra stuff (SU, ...) might make it fail!
Rooting
You can flash the latest Magisk to get rooted.

Just a little note on this, I've been testing his build and it's been really smooth so far. (Even more than my own AOSP build) Also for other ROM's devs out there, he's the original dev who fixed the sensors and he also fixed the camera without relying on AOSP hacks. (Well except SELinux but that's another thing...) You can check out the source for more info about it.
Because I didn't have much time to work on it, I want to thank @Ziyan for his work on this. I could even say that eventual people who are currently on the AOSP build should go on this one moving forward.

From 1 February I check ROM periodically. For now ROM is not for me. It is too raw.
There are no navigation buttons for me and I can not disable them if I want to use Button Savior, for example. ROM does not see WiFi 5GHz.
However, I am pleased that there's a thread on XDA.

Forgive me if it has already been posted in the gapps thread, but is open gapps working for 7.1.2 builds? Last I checked, it was reported that setupwizard crashes on 7.1.2 due to being outdated. Thx!

Thanks not work gapps setup wizard screen

ze7zez said:
There are no navigation buttons for me and I can not disable them if I want to use Button Savior, for example. ROM does not see WiFi 5GHz.
Click to expand...
Click to collapse
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
About 5 GHz, it seems to work fine for me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jer_ying_fd said:
Forgive me if it has already been posted in the gapps thread, but is open gapps working for 7.1.2 builds? Last I checked, it was reported that setupwizard crashes on 7.1.2 due to being outdated. Thx!
Click to expand...
Click to collapse
hasanben35 said:
Thanks not work gapps setup wizard screen
Click to expand...
Click to collapse
Yeah, Open GApps has a problem with setup wizard on 7.1.2 at the moment. I hope they'll fix it soon...

Ziyan said:
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
About 5 GHz, it seems to work fine for me: View attachment 4108596
Yeah, Open GApps has a problem with setup wizard on 7.1.2 at the moment. I hope they'll fix it soon...
Click to expand...
Click to collapse
Thx for confirming! For now I'll anxiously wait with the build already on my laptop ready to flash when the gapps are

Awesome Thank you for the continued development

Ziyan said:
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
Click to expand...
Click to collapse
I gave you a link to the thread. The code provided @spezi77 in post #2.
Request to Developers & Contributors ROMs for Nexus 4 on the navigation bar in TWRP
Ziyan said:
About 5 GHz, it seems to work fine for me.
Click to expand...
Click to collapse
That's right.
The ROM immediately shows 2 GHZ interfaces.
Within 12 seconds after the WiFi is switched on, 5 GHz interfaces are also displayed.
I was impatient.

If I dirty flash from 7.1.1 to 7.1.2 this ROM will be work without any issues?

I did a clean flash wiped everything but internal storage
I lose root frequently on this ROM and other nougat ROMs I'm using multirom twrp and multirom and hellspawn aosp nougat kernel revision 5
This ROM was installed in the primary slot of multirom
I used super su 2.79 and also tried magisk v12 neither worked
I used a 7.1.2 build with only flashing ROM and modifications : v4a an adreno driver and hellspawn kernel then booting
Then reboot to recovery and install open gapps pico 7.1
What am I doing wrong ?
Is multirom the culprit ?

[email protected] said:
I did a clean flash wiped everything but internal storage
I lose root frequently on this ROM and other nougat ROMs I'm using multirom twrp and multirom and hellspawn aosp nougat kernel revision 5
This ROM was installed in the primary slot of multirom
I used super su 2.79 and also tried magisk v12 neither worked
I used a 7.1.2 build with only flashing ROM and modifications : v4a an adreno driver and hellspawn kernel then booting
Then reboot to recovery and install open gapps pico 7.1
What am I doing wrong ?
Is multirom the culprit ?
Click to expand...
Click to collapse
Adreno driver 7.1.2 work ?
Kernel hellspawn work ?
Link please

Please open thread in nexus 5 too for this really​ AOSP rom
Sent from my Nexus 5 using Tapatalk

GAPPs
Ziyan said:
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
About 5 GHz, it seems to work fine for me: View attachment 4108596
Yeah, Open GApps has a problem with setup wizard on 7.1.2 at the moment. I hope they'll fix it soon...
Click to expand...
Click to collapse
Hello!
I was able to install the GAPPs:
1) flash rom
2) turn on the N4
3) flash gapps
4) superSU flash (optional)
That way I did not use the setup wizard, I just added my Google account to the Play Store.
(Translation by google trandutor)

hasanben35 said:
Adreno driver 7.1.2 work ?
Kernel hellspawn work ?
Link please
Click to expand...
Click to collapse
Hellspawn kernel aosp nougat mako just Google it
as for adreno driver it works on 7.1.2 February 2016 is the last stable adreno driver for nexus 4
Here is link for the February 2016 driver
https://www.androidfilehost.com/?fid=24459283995300671
The adreno driver works for 6.0 through 7.1.2

awesome thanks

donz_Simon said:
Please open thread in nexus 5 too for this really​ AOSP rom
Click to expand...
Click to collapse
Soon! our Nexus 5 maintainer (I don't have a Nexus 5, 4 is still my daily driver) just fixed a camera bug, according to him, only some selinux fixes are remaining until the thread can be opened

Hi again, loving the rom so far and thx very much for keeping the n4 alive! I understand the rom will not have any custom rom features since it's strictly AOSP, but I wonder if it might be possible to include ambient display? It is too useful for the screen to automatically turn on without having to press power button which many n4 owners probably have problems with, and to see notifications in a dimmer black and white screen that is unobtrusive which can return to full brightness and colour with a touch of the screen.
Thx again and very grateful for your work for the n4 community!

Thanks for your hard work and this great and very stable ROM @Ziyan :good:

Related

[ROM][CAF][22/09][OxygenOS Blobs][UNOFFICIAL]halogenOS 7.1.2 [Color Engine] [UBERTC]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android, Reimagined.
For the best experience, view the thread on a web browser like Chromium or Firefox.
Desktop: Brilliant. Mobile: Good. Tapatalk: OK. XDA-Labs: Horrible.
https://img.xda-cdn.com/sYTJztl8Kv1_[LIST]
[/LIST]RWoNac2kFW-Ti5M=/http%3A%2F%2Fi.imgur.com%2F9vBBxp6.png
Code:
[SIZE="3"]YOU are doing modifications to your device.
YOU are responsible for what you do.
We are not responsible for any damages, data loss or any type of unexpected,
bad or damaging results! If you have **SERIOUS** problems with this software,
please contact the developers or maintainers. We are not liable for anything
bad that happens to your device.
As long as you are responsible, some companies such as OnePlus
WILL HONOR IT. Some people occasionally describe them as heroes.
Don't be stupid and bet on that though, please be responsible for what you do.
We prohibit you from overclocking to 1337 GHz thinking, that an OEM would
replace your glorious space heater etc.
We recommend you to take the advice above regardless.[/SIZE]
halogenOS Checklist
Although no data should be lost or damaged by the flashing process,
we advise you to follow the following steps if you are coming from another rom:
Please take a full nandroid backup!
Please copy your back up to an external device.
Backing up your Internal Storage is also recommended.
When completed, please clean flash the build!
Although you usually can dirty flash halogenOS over other ROMs, considering the other
ROM has the same Android version, it is not guaranteed. In case of serious
crashes please do a clean flash.
XOS is a new generation cutting-edge OS for Android based on Code Aurora Forum releases.​
What is XOS?
halogenOS, also known as XOS is a new Android ROM which ships with the global aim to
become a modular ROM which keeps as high as potentially possible operating
performance on your mobile device while still maintaining a sufficient feature
base of nice, small and minimal features that would not be available via any
external feature base, extension, mod or plugin.
We hope you have a truly halogenified experience!
Internals of XOS
At core, the ROM is composed mainly of components from CodeAuroraForums (CAF),
featuring only extremely minor set of components from CyanogenMod (CM) which
have been added to source in order to allow for better cross-device compatibility.
Our LOVE to others
A huge thanks goes to those behind the CodeAuroraForums (CAF), the CyanogenMod
organization and all of its
contributors for the sources used in the development of the base ROM which we
started with inclusive of all the work and dedication their team puts in order to
keep us updated on the awesome contributions that they make.
We will be keen on ensuring that we be up to date with the code from our base sources,
with regular ROM updates hopefully coming from time to time.
Please do not ask for ETA's (else you shall be spooked by Mr Skeltal). Almost all of us are
students, and with the current lifestyles and routines we have, it is not that easy to acquire
time to develop the ROM, though we'll be sure to keep you updated and release OTAs as
soon as they are available and ready for publication. If you want to be really updated quick,
then join us on Telegram: http://telegram.me/halogenos
Visit our website for features such as: Downloads, Information etc.
http://halogenos.org
(Not finished yet)
Common stuff
The ROM is super stable as of now and we'll maintain a clean and proper ROM.
Known issues are going to be fixed as soon as possible. We don't have infinite time.
Planned features (don't ask for these!):
Heads-Up toggle
Button actions
OTA Updates
Highlights (some are OPO-only):
Built with UberTC
No QS Bug!!!
Reworked Lockscreen Visualizer
New implementation of button backlight
Modern Services -> Google Assistant etc.
Substratum
Full media support (FFMPEG, video codecs, ...)
Great Audio quality, no distortions, no crap
Optimized many portions of the system including surfaceflinger, inputflinger, System Server, and more
Super fast boot
Superuser-capable
Great battery life
Soundmod support (not all soundmods work on Nougat, it's not our fault)
addon.d support (backups your gapps etc. when flashing new build - don't wipe system before flashing!)
init.d support
BusyBox
Disabled Access Time for all partitions (We don't need access time. When access time is enabled, it will store the exact date of the access when a file is accessed, what just wastes write cycles (in theory) and has impact in I/O performance.)
Super smooth
Signature Spoofing toggle (Support for MicroG)
Support for trusted third-party WebViews like Chrome
Long press on home for assist toggle
Security Patches in kernel
KCal support
Kernel optimizations
OpenGapps (Mini/Micro/Nano recommended) and Banks GApps support
Offline Gestures support (super fast recoginition)
Alert Slider
Full KeyHandler & KeyDisabler support
Dexpreopt for faster (first) boot time and less space consumption on data partition
Upgrade & Boot the ROM in just 5 minutes - no more endless waiting for flashing a new build
Very high compatibility with other ROMs
How to update the ROM:
Download the latest zip
Reboot into TWRP (Please use official TWRP)
Do not wipe anything
Flash the ROM
Flash Magisk 13.3 or newer if you want
Reboot
You don't need to wipe Cache/Dalvik.
You don't need to flash gapps again. There is some magic going on which keeps your GApps. Just make sure that you don't wipe system before flashing.
You don't need more than 5 minutes.
How to install the ROM for the first time:
Download the latest zip
Reboot into TWRP (Please use official TWRP)
Wipe system, data and cache (If you want to try a dirty flash, dont wipe anything)
Flash the ROM
Flash gapps if you want
Flash Magisk 13.3 or newer if you want (Download 2.79 here)
Reboot
ROM Download Links:
Download halogenOS now:
AFH:​
NEW:Build 22/9/2017
OLD:Build 13/9/2017
OLD:Build 10/9/2017​
ROM Sources
All sources incl. ROM, Kernel, Trees @ halogenOS GitHub Organisation.
## DEVICE SPECIFIC
OnePlus One
Kernel source
Device tree
Vendor tree
This is an unofficial build.​Now the only differece is the Toolchain used​
XDA:DevDB Information
Unofficial HalogenOS, ROM for the OnePlus One
Contributors
Silvered
Source Code: https://github.com/halogenOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: HalogenOS
Version Information
Status: Stable
Created 2017-09-10
Last Updated 2017-09-22
Changelog
Changelog:
Build 22/09/2017:
Fixed Black Screen
Doze improvements
Set animation from 1.0 to 0.5
enable aptXHD support
Bluetooth: Properly check L2CAP config option output buffer length
Autoflash OxygenOS Firmware
Build 13/09/2017:
I suggest to do a clean flash before install build 13/09
Replaced Launcher3 with Pixel Launcher
Added Circular Icon in Pixel Launcher
Replaced SnapDragonCamera with OnePlusCamera
Added Color Engine
Help me
Hi all, for maintaining this ROM I pay every month a server that cost 7$. So because of this cost I can't maintain this ROM forever, if you use this ROM and love it, you can help me with a donation.
Paypal: HERE
​
First.
Happy to see HalogenOS back.
Assuming to the first post we still can't change button actions, right?
Stylez Ray. said:
Assuming to the first post we still can't change button actions, right?
Click to expand...
Click to collapse
Yes, i will add it in the next releases
Silvered said:
Yes, i will add it in the next releases
Click to expand...
Click to collapse
have you personally tested this rom and have previous mentioned bugs been resolved i.e camera?
OOS blob v3 right?
Clean flashed. Camera is fast. I like how minimal it is.
Dang that VoLTE toggle
Edit: Unable to find lockscreen gestures in settings.
Lolll @ volte screenshot
joefso said:
have you personally tested this rom and have previous mentioned bugs been resolved i.e camera?
Click to expand...
Click to collapse
If you meen the bug of camera app, i tested the build, it works fine and the camera too
Thanhtho96 said:
OOS blob v3 right?
Click to expand...
Click to collapse
Yes
Silvered said:
If you meen the bug of camera app, i tested the build, it works fine and the camera too
Click to expand...
Click to collapse
Camera already worked in permissive, but had problems in enforcing. Could you take a look for the next build?
Also the text don't in the upper bar, when it displays the context of an SMS, is somewhat too big when the screen display size is set to smallest, could this be somewhat smaller? Reboot fixed it
hdr crashes with default camera, bacon camera seems to work fine
joefso said:
Camera already worked in permissive, but had problems in enforcing. Could you take a look for the next build?
Also the text don't in the upper bar, when it displays the context of an SMS, is somewhat too big when the screen display size is set to smallest, could this be somewhat smaller? Reboot fixed it
hdr crashes with default camera, bacon camera seems to work fine
Click to expand...
Click to collapse
Confirming HDR crash on camera.
ninjasumit said:
Confirming HDR crash on camera.
Click to expand...
Click to collapse
Log please
joefso said:
Camera already worked in permissive, but had problems in enforcing. Could you take a look for the next build?
Also the text don't in the upper bar, when it displays the context of an SMS, is somewhat too big when the screen display size is set to smallest, could this be somewhat smaller? Reboot fixed it
hdr crashes with default camera, bacon camera seems to work fine
Click to expand...
Click to collapse
HDR works for me ..just enable AutoHDR in setting for both front and back camera before using it simple.
Just clear data of the camera and do the above setting.
"Though its crashing without enabling autoHDR"
Absolutely best nougat ROM for me. Plz keep updating until you made this one for Android Oreo
Silvered said:
Log please
Click to expand...
Click to collapse
Here you go.
Very nice rom love it i like near stock roms but have strayed with n roms due to camera. Great camera except the flash doesn't work right see pics the bright one was taken with google camera other pic with stock camera. When you touch screen to focus flash lights up the object like in the google cam pic but when it takes the pic the flash is so dim it doesnt really work.
What would be the best camera app to use to get full benefits of the camera blobs? Bacon camera?
Rom is fluid and responsive as compared to other caf roms. Keep updating because some of developers just creating lots of roms And neglecting there updates specially sutenized CAF roms...

[ROM][8.1][A3 2016] ResurrectionRemix 6.2.1 for Galaxy A3 2016 | a3xelte | SM-A310xx

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy A3 2016 | a3xelte | SM-A310xx
UNOFFICIAL | Android 8.1
Download: HERE​
Changelog:
Code:
[COLOR="Teal"]2019-02-08[/COLOR]
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG1 to CRH1 for better security and stability (this time it mostly improved GPS)
- Fixed bluetooth calling
[COLOR="Teal"]2019-01-30[/COLOR]
- Initial release
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Installation instructions:
1. Make sure you have TWRP installed on your device to be able to flash the rom.
2. Download the latest build from the link above and copy it to a place where you can find it later.
3. Optionally download GApps for using the Play Store and other Google related services from here: https://opengapps.org. Choose ARM as architecture and 8.1 as the OS version. The size of the GApps package is upon to you how much apps you want to have preinstalled. Copy this zip aswell to a place where you can find it easy later. If you download it with Chrome or with the Google Drive App it should be by default in the Download folder.
4. Turn your phone off and press Volume UP + Home Button + Power button at the same time until the splash screen appears. Then your device should boot into the recovery. There you wipe following partitions: Data, System, Cache, Dalvik if this is your first install. All of your installed applications get lost by this. Your photos, videos etc. won't get deleted if you haven't ticked the box for internal storage. As the kernel also supports F2FS i would change the filesystem for the cache partition from ext4 to f2fs for a better system performance. Now go to the main TWRP menu, click on install and go to the place where you have placed your zips and first select the rom and then click on the left button if you have downloaded the optional GApps package to add another zip to the queue. Now swipe the slider at the bottom to install and reboot the phone to the system. The first boot can take a while and after booting you could experience some lags because of the GApps initialization but they should disappear after some time.
5. Now you have successfully installed the rom and you're ready to use ResurrectionRemix on your device. Congratulations!
Bugs:
- VoLTE (isn't working on samsung devices and won't work anytime in the future too)
- Same as LineageOS 15.1
Credits:
@danwood76 for maintaining the a3xelte device tree
@Stricted for maintaining the common device tree
Contributors:
@Borduni
Source Code:
https://gitlab.com/dariotrombello
https://github.com/ResurrectionRemix
https://gitlab.com/Exynos7580
Version Information
Android: 8.1 Oreo
Kernel: Linux 3.10.108
Status: Stable
Stable Release Date: 2019-30-01
Created: 2019-30-01
Last Updated: 2019-02-08
reserved
Many thanks:good:
I would just like to thank @Borduni @danwood76 @Stricted and all the devs that are helping maintain our device and bringing us updated ROMs! This was a rom i was wishing for very much! Thank you for all your efforts and time dedicated for us.
4-core processor or 8-core processor?
If 8 core enabled, can we get 4 core enabled version?
Also thank you all of you guys for still developing for A310F users. I wish i can donate for you guys but PayPal is not avalaible in our country.
senemir said:
4-core processor or 8-core processor?
If 8 core enabled, can we get 4 core enabled version?
Also thank you all of you guys for still developing for A310F users. I wish i can donate for you guys but PayPal is not avalaible in our country.
Click to expand...
Click to collapse
Quad Core Kernel. I won't publish any of my new roms with Octa Core Kernel's because of the high battery drain.
You don't need to donate me anything. I don't even have set up PayPal :laugh:.
Borduni said:
Quad Core Kernel. I won't publish any of my new roms with Octa Core Kernel's because of the high battery drain.
You don't need to donate me anything. I don't even have set up PayPal :laugh:.
Click to expand...
Click to collapse
Thanks bro. I will try this rom tomarrow.
And i dont like Octa Core too. Phone overheats and battery drain is too much like you said.
Keep up that great work !
Does sound work in all apps? I've used three other 8.0 roms and they all recorded mic very quietly in apps like Snap and Insta.
hajdud said:
Does sound work in all apps? I've used three other 8.0 roms and they all recorded mic very quietly in apps like Snap and Insta.
Click to expand...
Click to collapse
This will be fixed soon, it's on my list
2019-02-08
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG1 to CRH1 for better security and stability (this time it mostly improved GPS)
- Fixed bluetooth calling
As I see this rom audio recording is working fine right? I had another issue with L15.1 which was that I couldn't get faceunlock to work at all, it didn't even show up in the setings. It wasn't the gapps cause I use those same gapps on extendedAOSP and it worked. Also at some point the mic stopped working, etheir for calls nor audio recording. I'm on 14.1 now but it doesn't play flac natively and the music player I use doesn't support flac by itself, all the rest is great en 14.1. So, if anyone is kind enough to advice me about this ROM that'd be great, I'm getting a little tired of flashing, mostly because I need the phone for work during the day and the microphone dying is not cool XD Thanks in advance.
LucasNerv said:
As I see this rom audio recording is working fine right? I had another issue with L15.1 which was that I couldn't get faceunlock to work at all, it didn't even show up in the setings. It wasn't the gapps cause I use those same gapps on extendedAOSP and it worked. Also at some point the mic stopped working, etheir for calls nor audio recording. I'm on 14.1 now but it doesn't play flac natively and the music player I use doesn't support flac by itself, all the rest is great en 14.1. So, if anyone is kind enough to advice me about this ROM that'd be great, I'm getting a little tired of flashing, mostly because I need the phone for work during the day and the microphone dying is not cool XD Thanks in advance.
Click to expand...
Click to collapse
Most audio issues are fixed in the latest version.
RR should be as stable as my Lineage OS builds as it is based on my trees. Only current issue is buggy MTP but this will be mostly solved in our kernel tree soon.
RR-Pie-v.7.0.1 is coming soon
Hi,
(This is my first post on xda, so I'm not sure I'm doing it right. Tell me if I should do it differently so I learn)
I like this rom, and have used it in various versions of several devices, so I'm happy to see it is developed for this device too.
However, when i try to flash it to my SM-A310F, I get the error that this rom is for a3xelte, while my device is (blank space) .
I use TWRP v. 3.0.2.1 and have flashed the revolution OS rom with success. This rom works ok, but I just miss some the customizations and functionalities in RR.
-And also the lack of samsung software, which I use none of and just disable.
I general, I can install roms which are based on the stock samsung rom in some way or another (like the revolution OS), but not roms like RR, dotOS or lineages.
From Software settings (running revolution OS):
Baseband: A310FXXU2BPG6
Kernel version: 3.10.105-NOUGAT-ALX-0.0.2
So, do any of you clever people have a good idea why my SM-A310F is not considered worthy for RR? Is there a way to flash it anyway, or is this a hardware issue of some sort?
And thanks!
Bobbobelob said:
Hi,
(This is my first post on xda, so I'm not sure I'm doing it right. Tell me if I should do it differently so I learn)
I like this rom, and have used it in various versions of several devices, so I'm happy to see it is developed for this device too.
However, when i try to flash it to my SM-A310F, I get the error that this rom is for a3xelte, while my device is (blank space) .
I use TWRP v. 3.0.2.1 and have flashed the revolution OS rom with success. This rom works ok, but I just miss some the customizations and functionalities in RR.
-And also the lack of samsung software, which I use none of and just disable.
I general, I can install roms which are based on the stock samsung rom in some way or another (like the revolution OS), but not roms like RR, dotOS or lineages.
From Software settings (running revolution OS):
Baseband: A310FXXU2BPG6
Kernel version: 3.10.105-NOUGAT-ALX-0.0.2
So, do any of you clever people have a good idea why my SM-A310F is not considered worthy for RR? Is there a way to flash it anyway, or is this a hardware issue of some sort?
And thanks!
Click to expand...
Click to collapse
You need to update TWRP. Here you find the latest official build: https://eu.dl.twrp.me/a3xelte
And also you could do a baseband update. Flash the newest firmware for your country via ODIN and install TWRP and RR after that again.
I recommend you to use RR 7 (Android 9) instead of this. I haven't published a build since a long while.
Thanks so much for the very quick response! I will give both a try starting with updating twrp. I'm not sure where to look for the baseband update, but I will try to find it if twrp update does not work.
Bobbobelob said:
Thanks so much for the very quick response! I will give both a try starting with updating twrp. I'm not sure where to look for the baseband update, but I will try to find it if twrp update does not work.
Click to expand...
Click to collapse
You can use the tool samfirm (google it) or updato.com
Baseband updates can improve signal strength/battery life. But it is not necessary.
Thanks again, I really appreciate your help.
I'd love to try RR7, but I can't find the download link in the relevant thread (it says removed by OP) or in the RR homepage. Therefore I chose this version instead. Is RR7 available somewhere else.
https://forum.xda-developers.com/sa...m-rr-7-0-1-galaxy-a3-2016-a3xelte-sm-t3919153

[ROM][OFFICIAL][NIGHTLIES] LineageOS 17.1 Harpia

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
Known issues:
....
Instructions:
Download the latest build, official TWRP (3.3.0 and newer)
Boot the downloaded TWRP via fastboot
Flash the latest build
Reboot
Downloads:
Unofficial build: SourceForge-CAN EAT YOUR CAT
Official Rom and recovery: LineageOS
Google Apps: OpenGapps
XDA:DevDB Information
LineageOS 17.1 Harpia, ROM for the Moto G4 Play
Contributors
jeferson1979
althafvly
Device tree
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Based On: lineage
Version Information
Status: Stable
Current Stable Version: 17.1
Stable Release Date: 2020-03-22
Created 2020-03-22
Last Updated 2020-03-22
Reserved
Always giving thanks to @facuarmo and @Akyanonimous for the great support
Help. i tried to flash this ROM and my phone have bootloop.
I was a long term user of Pixel Experience ( Android 9 / Pie) and enjoyed it's stability. As it is no longer maintained I thought I would try out some of the latest Android 10 / Q ROMs to see how they compared. I still kept the zip file for Pixel on my SD card by way of a fall back if I wasn't happy with the latest unofficial Android 10 ROMs.
I gave Havoc OS a try for a few days and to an extent I liked it with the ability to very much set up the ROM as you like with multiple customisation options. I , however, found that the overall experience wasn't very good with quite a bit of lag and some random crashes of apps etc. I am sure with future updates it will be a much better ROM and I may well give it another try out.
After Havoc I went back to Pixel Experience for a few weeks until the next unofficial Android 10 ROM was released. Thus far I have been very happy with Lineage 17 with no bugs , lag , crashes or issues at all thus far. The only slight grumble is that the music app widget is not really required on the ' 2nd page ' and indeed was just a big black blob. I deleted it straight away. I will probably continue to use this as my daily driver for some time to come and give thanks to @jeferson1979 and any other Devs who contributed for all their hard work and for us to be able to keep our old Harpia phones going with the latest android version.
Indiawallah71 said:
I was a long term user of Pixel Experience ( Android 9 / Pie) and enjoyed it's stability. As it is no longer maintained I thought I would try out some of the latest Android 10 / Q ROMs to see how they compared. I still kept the zip file for Pixel on my SD card by way of a fall back if I wasn't happy with the latest unofficial Android 10 ROMs.
I gave Havoc OS a try for a few days and to an extent I liked it with the ability to very much set up the ROM as you like with multiple customisation options. I , however, found that the overall experience wasn't very good with quite a bit of lag and some random crashes of apps etc. I am sure with future updates it will be a much better ROM and I may well give it another try out.
After Havoc I went back to Pixel Experience for a few weeks until the next unofficial Android 10 ROM was released. Thus far I have been very happy with Lineage 17 with no bugs , lag , crashes or issues at all thus far. The only slight grumble is that the music app widget is not really required on the ' 2nd page ' and indeed was just a big black blob. I deleted it straight away. I will probably continue to use this as my daily driver for some time to come and give thanks to @jeferson1979 and any other Devs who contributed for all their hard work and for us to be able to keep our old Harpia phones going with the latest android version.
Click to expand...
Click to collapse
How you installed this ROM? Because i flash with TWRP 3.2.1-0 (the last version for Harpía) and use ARM Gapps for Android 10 but dont boot (have bootloop).
Sakul94 said:
How you installed this ROM? Because i flash with TWRP 3.2.1-0 (the last version for Harpía) and use ARM Gapps for Android 10 but dont boot (have bootloop).
Click to expand...
Click to collapse
I have indeed installed the latest Lineage 17.1 Rom and it works great. I , too , have the latest TWRP and found it very straight forward to install the zip file for Lineage , with ARM GAPPS for Android 10 and the latest Magisk for rooting my device. I assume when flashing the Rom etc you did a clean install by doing an Advanced wipe of Davlik/ART Cache , System , Data and Cache before proceeding. Good luck and hope you are able to get it going.
Indiawallah71 said:
I have indeed installed the latest Lineage 17.1 Rom and it works great. I , too , have the latest TWRP and found it very straight forward to install the zip file for Lineage , with ARM GAPPS for Android 10 and the latest Magisk for rooting my device. I assume when flashing the Rom etc you did a clean install by doing an Advanced wipe of Davlik/ART Cache , System , Data and Cache before proceeding. Good luck and hope you are able to get it going.
Click to expand...
Click to collapse
Yes, i did every step to flash this ROM but no result. The phone have bootloop.
latest TWRP for harpia is 3.2.3-r1. find that here - https://forum.xda-developers.com/devdb/project/?id=16870#downloads
try that and see if it bootloops.
bacanos said:
latest TWRP for harpia is 3.2.3-r1. find that here - https://forum.xda-developers.com/devdb/project/?id=16870#downloads
try that and see if it bootloops.
Click to expand...
Click to collapse
Thank you very much. You are an genius.
@jeferson1979 Your roms are what a rom should be! I have never thought that android 10 can run this smooth in this tiny device. All Thanks to you. Rom is very stable and is best rom available right now after AEX pie which is again your offering.
Unlike past developers your focus is more towards usage and fixing things rather than pure compiling/half baked pieces and that's what old time developing was...
Thanks to keeping this device alive. I use it because of it's light and small and easy to carry.
Now the only thing remaining is- I guess SELinux.
Thanks for all the work, I will flash this later today and post my feelings. Would it be possible to make this an official build? I loved the automatic updates via OTA from the official builds.
The ROM works great, however SELinux is not enabled, would it be possible to enable it?
Sakul94 said:
How you installed this ROM? Because i flash with TWRP 3.2.1-0 (the last version for Harpía) and use ARM Gapps for Android 10 but dont boot (have bootloop).
Click to expand...
Click to collapse
Liteh said:
The ROM works great, however SELinux is not enabled, would it be possible to enable it?
Click to expand...
Click to collapse
you can manually set SELinux to enforcing by enabling the terminal shell in the Developer options and using the command, "setenforce enforcing"
this enables enforcing but i have no idea if the SELinux policy is written or doing what it needs to be doing, and this manual enforcing only lasts until reboot. does anyone know more on this subject?
Liteh said:
The ROM works great, however SELinux is not enabled, would it be possible to enable it?
Click to expand...
Click to collapse
Selinux is on mode permissive, but you can expect next update to be on enforcing mode, by now don't turn enforcing
jeferson1979 said:
Selinux is on mode permissive, but you can expect next update to be on enforcing mode, by now don't turn enforcing
Click to expand...
Click to collapse
That's great, I'll be waiting for the next update. After a day using it, I have to say that it is indeed a wonderful ROM, very fluid and responsive.
Flashed this ROM, till now everything works great. Thank you!
Gesendet von meinem GM1903 mit Tapatalk
jeferson1979 said:
Selinux is on mode permissive, but you can expect next update to be on enforcing mode, by now don't turn enforcing
Click to expand...
Click to collapse
Can you please also release Android GO variant of Lineage. Recently I have seen one Go device, and it was so smooth even with 1GB RAM. We have 2GB so I guess Android GO will improve responsiveness and battery life slightly? Please correct me if I'm wrong.
newinnov said:
Can you please also release Android GO variant of Lineage. Recently I have seen one Go device, and it was so smooth even with 1GB RAM. We have 2GB so I guess Android GO will improve responsiveness and battery life slightly? Please correct me if I'm wrong.
Click to expand...
Click to collapse
You will see some minor improvement at memory management, but we will loose in other side. Maybe we can do some tests
I agree with newinnov. In fact i think it should be nice for the LineageOS team to keep supporting older devices (like ours) officially but in Android GO form. It would keep millions of phones out of landfills.
In our case I think the benefits overcome the loses. At this point i'm sure all of us are using our g4p for bare minimun tasks like whatsapp, email, browsing, social networking, and such. Mostly no functionality-intensive apps. Given that all of that can be done with Android GO i don't think we would lose that much

[OFFICIAL][a7xelte][SM-A710F]Lineage OS 17.1 for A7 2016

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10.0, which is designed to increase performance and reliability over stock Android for your device. The port for the Exynos7580 based devices was created by @Stricted and I along with many contributions from other people in the Android community.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What works
Calls, SMS, Mobile Data​Camera​NFC​WiFi​Bluetooth​Torch​Sensors​GPS​HWC​What doesn't work
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS.​You tell me!​​
Known Issues
If you are running the latest update and are not able to enroll a fingerprint you may need to clear the fingerprint data using this zip (flashable in TWRP): https://mega.nz/#!6YZV2QTY!hOYYwrbkTPfThUIJUffOEQWMosdCxeqy_7JdGpYp3AA​​
There are still quite a few features that are not yet completed for LineageOS 17.1, these are not bugs this is a beta release.
Any hardware related issues will be ignored if you do not provide:
a) Logcat
b) proc/last_kmsg
c) data/tombstones
d) dmesg
Also do not under any circumstances post bug reports if you are using substratum themes or unsupported magisk modules or you have performed any system modifications
Installation
Install the latest TWRP (Available Here)​Make a full backup (just in case something goes wrong)​Do a full wipe (Cache, Data, System)​If this is your first time on a LineageOS ROM format data​Download the latest LOS build and transfer it to your phone​Install LOS​If you are installing GApps do it at the same time (preferably in the same install queue)​And finally boot, the first boot can take several minutes as it optimizes all the apps​Do NOT install the TWRP app when prompted, this will cause a bootloop​​Downloads
Latest Official releases HERE​OpenGapps HERE(ARM, 10, nano)​TWRP is availableHERE​Magisk is available HERE​​Thanks
@Stricted​@l-0-w​@danwood76​@sekil​@alexax66​@macs18max (BT call audio fix)​@Borduni​All the testers on the Discord group (https://discord.gg/8fp9cr7)​And all others who have contributed to the Exynos projects past and present.​​
XDA:DevDB Information
Lineage OS 17.1 for A7 2016, ROM for the Samsung Galaxy A Series
Contributors
Androbots, danwood76, Stricted
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/LineageOS/android_kernel_samsung_universal7580
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest Stock.
Based On: AOSP
Version Information
Status: Stable
Update frequency: Every week (Nightlies)
Current Stable Version: 17.1
Current Beta Version: 18.0
Created 2020-04-24
Unofficial change log below:
Code:
Changes in the 24/04/2020 release:
[INDENT]- Disable rounded corner animations (thanks @dariotr)
- Cleanup overlays (thanks @dariotr)
- Switched to new BSP to solve licensing issues (thanks @stricted)
- Synced to latest LOS (including April security patch)
[/INDENT]
Thanks danwood for the thread layout
android not boot. stop on bootanimation.
not file for clean fingerprint a7 (2016).
is file a5 (2016)
king.alpha said:
android not boot. stop on bootanimation.
not file for clean fingerprint a7 (2016).
is file a5 (2016)
Click to expand...
Click to collapse
Yes same dude, im stop on bootanimation, before I installed and succeeded, when I wanted to install magisk ROM instead of bootloop, and I tried to install ROM again then stop the boot animation
king.alpha said:
android not boot. stop on bootanimation.
not file for clean fingerprint a7 (2016).
is file a5 (2016)
Click to expand...
Click to collapse
gshsgsbw said:
Yes same dude, im stop on bootanimation, before I installed and succeeded, when I wanted to install magisk ROM instead of bootloop, and I tried to install ROM again then stop the boot animation
Click to expand...
Click to collapse
Y'all might wanna redownload the ROM. I've updated the link yesterday forgot to post an update
thanks for great android 10.
android is nice work.
but recent botum not work.
is the rom only for exynos or can it run on snapdragon version too
hw menu and back button doesn't work. but still great
capacitive buttons and navigation bar and sms do not work. but it is a beautiful job.
I hope you can port this also to A3 2016 - A310F
New update
Changelog:
* Source Upstream
* Merged all changes from the a5xelte tree.
* All the cool stuff that comes with source upstream including the controversial LineageOS clock. ( I like it )
* Will work on getting the HW keys and SEpolicy right.
Thanks for sticking around this long.
Thanks @linuxandria for hosing the zips.
Thanks to the 7580 LineageOS team.
https://downloads.linuxandria.com/lineage/a7xelte/
New Update! (hopefully the last one before we go official)
* Fixed SEPolicy we boot enforcing now. (thanks danwood76)
* Fixed the HW back keys they should work fine now. (thanks danwood76)
* Fixed SafetyNet which means you can use apps like Google Pay and Netflix now!
* Merged android_r40 July patch.
Download: https://www.dropbox.com/s/i86wyid694ctsei/lineage-17.1-20200707-UNOFFICIAL-a7xelte.zip?dl=0
Have fun!
Androbots said:
New Update! (hopefully the last one before we go official)
* Fixed SEPolicy we boot enforcing now. (thanks danwood76)
* Fixed the HW back keys they should work fine now. (thanks danwood76)
* Fixed SafetyNet which means you can use apps like Google Pay and Netflix now!
* Merged android_r40 July patch.
Have fun!
Click to expand...
Click to collapse
hi thanks for your great job . can I flash this rom on a710fd ?
and what are issues with it ? has pixel (google) apps? I need closest rom to pixel experience and so far only this one seems to be compatible with my device. (any suggestions?)
a710fd said:
hi thanks for your great job . can I flash this rom on a710fd ?
and what are issues with it ? has pixel (google) apps? I need closest rom to pixel experience and so far only this one seems to be compatible with my device. (any suggestions?)
Click to expand...
Click to collapse
Yes. You can flash this on any Exynos variant of the A7 2016.
You can flash gapps from https://opengapps.org/ I would highly recommend you flash the pico Android 10.0 ARM variant as it is the most light and jank free GApps package.
After you boot-up, you can download and install Google apps such as the dialer app. Make sure you set the apps like the Dialer and the Messages as the default apps in Settings -> Apps and Notifications -> Default Apps
Let me know how you feel the ROM is.
Thanks
Thanks for the good work bro. It's smooth.
Fingerprint still not working
Hi
My fingerprint sensor is not working with this OS. Why ? Will you be fixing that in a future update
And thanks for this project man. Galaxy a7 2016 seems to be a very uncommon phone because almost no custom ROMs support it.
cl.ement05 said:
Hi
My fingerprint sensor is not working with this OS. Why ? Will you be fixing that in a future update
And thanks for this project man. Galaxy a7 2016 seems to be a very uncommon phone because almost no custom ROMs support it.
Click to expand...
Click to collapse
Hey, the FP sensor works just fine here. What's the problem? Which build? Can you provide logs please?
Androbots said:
Hey, the FP sensor works just fine here. What's the problem? Which build? Can you provide logs please?
Click to expand...
Click to collapse
Well it's not working on my devices (sm-a710m variant). When I open the fingerprint setup well it's like the fingerprint sensor wasn't detected (I just get stuck on the "touch sensor" screen.
I wish I could provide logs yes but how Using bug report ?
cl.ement05 said:
Well it's not working on my devices (sm-a710m variant). When I open the fingerprint setup well it's like the fingerprint sensor wasn't detected (I just get stuck on the "touch sensor" screen.
I wish I could provide logs yes but how Using bug report ?
Click to expand...
Click to collapse
https://www.xda-developers.com/what-is-adb/ this should help. What we need here is a logcat. Once you've followed the instructions in the above guide,
type in the following when u open the fingerprint registration settings page:
adb logcat > log.log
and send that log to me
Androbots said:
https://www.xda-developers.com/what-is-adb/ this should help. What we need here is a logcat. Once you've followed the instructions in the above guide,
type in the following when u open the fingerprint registration settings page:
adb logcat > log.log
and send that log to me
Click to expand...
Click to collapse
Thanks for the link but I know what is adb and how to use it lol. I am not (that) noob in technology.
However am sorry it looks adb is not working on my phone. Is micro g needed to have adb working ?

[ROM][10.0][POPLAR] Unofficial PixelExperience Plus [STOCK-BASED][03 Sep 2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience Plus for Sony XZ1 [poplar]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
This build does not use Sony Open Device sources, but it's built using stock sources (like Lineage OS 17.1, BlissRom and other ROM) hence it's stable
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera (memory leak fixed)
Bluetooth
Fingerprint reader
NFC
Sound / vibration
Known issues
Camera crash after dirty flash
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Unofficial downloads
XZ1 Single SIM
XZ1 Dual SIM[/color][/b]
Stay tuned
Pixel Telegram channel
XZ1 Telegram Group
Pixel blog​
If you liked my work, you can support me!
Android OS version: 10.0.0_r40
Security patch level: July 2020
Build author/Device Maintainer: @Gabrius99
XZ1 Single SIM Source code: https://github.com/Gabrius99/device_sony_poplar
XZ1 Dual SIM Source code: https://github.com/Gabrius99/android_device_sony_poplar_dsds
Kernel Source code: https://github.com/whatawurst/android_kernel_sony_msm8998
Thanks to @derf elot and @modpunk for Device Tree and Kernel Tree
Source code: [url]https://github.com/PixelExperience[/url]
ROM Developer: jhenrique09
​
XDA:DevDB Information
Pixel Experience, ROM for the Sony Xperia XZ1
Contributors
Gabrius99, derf elot, modpunk
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Firmware Stock
Version Information
Status: Stable
Current Stable Version: RC1
Stable Release Date: 2020-08-10
Created 2020-08-10
Last Updated 2020-09-02
Some tips
How to pass SafetyNet Check that is, hide root permissions from apps that detect it
Magisk 20.4 does his work pretty well, so often just flash Magisk zip directly after flashing the ROM, then reboot.
If you already flashed and booted ROM, don't wipe anything, but try this.
• Flash Magisk;
• Reboot to system;
• Open Magisk, enable Magisk Hide from settings, then go to Magisk Hide section and hide:
- PlayStore
- PlayService
- Google Pay (if installed)
• Go to Settings > Apps and wipe data of:
- PlayStore
- PlayService
- Google Pay (if installed)
• Open PlayStore and wait ~1 min. Then go to settings section and scroll down. There should be: Certified Device.
After this, from Magisk hide all apps that you don't want to detect root permissions and they shouldn't detect it anymore.
How to fix camera crash
Camera crash occurs because of cache optimization that isn't present anymore when you dirty flash and wipe cache/ART. You'll need to recompile it opening a terminal emulator (Termux) and using:
Code:
cmd package compile -f -m speed com.sonyericsson.android.camera
(Thanks to derf elot)
Why GCam doesn't works?
Modded GCams need full RAW support, that is locked on ROM based on Sony Stack (like this). So GCam will simply crash if installed. Anyway there is one version that doesn't use API2 and works almost well, you can download it directly from PlayStore. Obviously it won't support HDR+ (and currently I don't plan to add it, it is far beyond my skills).
Changelogs and older builds
RC2 "Now you see me" - 03 September 2020
- Updated to Android 10_r41 - August patches
- Kernel updated to version 4.4.234;
- Fixed GPS doesn't lock position;
- Fixed BT headset not working;
- Other small improvements.
RC1 "Here we go" - 10 August 2020
XZ1 Single SIM
XZ1 Dual SIM
- Initial release
to anyone who is going to ask here: NO. GCAM MOD IS NOT WORKING SINCE IT'S STOCK BASED.
thank you
great rom
jimmy1235 said:
to anyone who is going to ask here: NO. GCAM MOD IS NOT WORKING SINCE IT'S STOCK BASED.
thank you
great rom
Click to expand...
Click to collapse
But Google camera is working, good enough for me
It is not high customisable but very stable, you wouldn't feel the difference between stock and this ROM
pleniceanu cristian said:
But Google camera is working, good enough for me
It is not high customisable but very stable, you wouldn't feel the difference between stock and this ROM
Click to expand...
Click to collapse
jimmy1235 said:
to anyone who is going to ask here: NO. GCAM MOD IS NOT WORKING SINCE IT'S STOCK BASED.
thank you
great rom
Click to expand...
Click to collapse
Yeah, Arnova's modded GCam does not work because of lack of raw support.
You can install GCam from PlayStore though. It hasn't HDR+, but photo sphere works.
Gabrius99 said:
Yeah, Arnova's modded GCam does not work because of lack of raw support.
You can install GCam from PlayStore though. It hasn't HDR+, but photo sphere works.
Click to expand...
Click to collapse
problem with app not allowing rooted phone
Parallax's said:
problem with app not allowing rooted phone
Click to expand...
Click to collapse
I have rooted phone, everything ok
Parallax's said:
problem with app not allowing rooted phone
Click to expand...
Click to collapse
I updated post #2 and I wrote a brief guide on how to pass safetynet check. Try that
The good: Very stable ROM, almost everything tested seems to be working, stable network signal, the most stable so far. I hope it gets updates at some point. Good work.
Anyone wishing for a close to stock stable Android 10 should try it.
The bad: the stock camera is crashing but that's already said.
It would be great if you could bring Sony sound settings but that is a little harder I think
pleniceanu cristian said:
The good: Very stable ROM, almost everything tested seems to be working, stable network signal, the most stable so far. I hope it gets updates at some point. Good work.
Anyone wishing for a close to stock stable Android 10 should try it.
The bad: the stock camera is crashing but that's already said.
It would be great if you could bring Sony sound settings but that is a little harder I think
Click to expand...
Click to collapse
Thanks for feedback. There is a fix in the second post. Starting from next build it shouldn't crash anymore on clean flash though. Do you have a XZ1 single sim or dual?
Gabrius99 said:
Thanks for feedback. There is a fix in the second post. Starting from next build it shouldn't crash anymore on clean flash though. Do you have a XZ1 single sim or dual?
Click to expand...
Click to collapse
Single.
Don't know what i'm doing wrong, but after flashing ROM via TWRP, phone reboots to TWRP and Will nota boot to OS.
Any hint?
Speaker87 said:
Don't know what i'm doing wrong, but after flashing ROM via TWRP, phone reboots to TWRP and Will nota boot to OS.
Any hint?
Click to expand...
Click to collapse
You should format data and remove encryption
Gabrius99 said:
You should format data and remove encryption
Click to expand...
Click to collapse
Thanks you for the hint, i'll try and feedback
Speaker87 said:
Thanks you for the hint, i'll try and feedback
Click to expand...
Click to collapse
It worked
Thank you
I flashing ROM, no volte, using China Unicom sim
The Bluetooth headset is successfully connected, but the music is still played by the phone speaker.
Wuqiman1993 said:
The Bluetooth headset is successfully connected, but the music is still played by the phone speaker.
Click to expand...
Click to collapse
Reconnect or close and open again speaker or delete device and readd. Maybe restart phone?
Wuqiman1993 said:
The Bluetooth headset is successfully connected, but the music is still played by the phone speaker.
Click to expand...
Click to collapse
Same issue, and I also tried to reconnect Bluetooth speaker but not work at all
New update
New Update
RC2 "Now you see me"
Changelog:
- Updated to Android 10_r41 - August patches
- Kernel updated to version 4.4.234;
- Fixed GPS doesn't lock position;
- Fixed BT headset not working;
- Other small improvements.
Thanks to @derf elot who did a great work.
How to update:
No need to clean flash, you can simply apply the update from TWRP.
Anyway, if weird issues occur, you should clean flash and retry. Soemtimes you need to format /data partition after clean flash to remove completely the encryption.
XZ1 Single SIM
XZ1 Dual SIM

Categories

Resources