Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You flash this rom at your own risk,
i take no responsibility for any mishaps.
Subscribe to update notifications and general chat by clicking the button below
WETA 6P TELEGRAM CHANNEL
This here is my personal setup and thought i'd share. Usually i test extensively before releasing to public, but if you do find something detrimental to the usage of your device that is either Force Closing or simply not working, let me know and i will in turn inform whether that is something i will tend to.
WETA is made for Music geeks like me, its main focus is stability and Audio. It is Based off latest firmware currently, and will always be using the most up to date firmware base.
Audio mods...
A.R.I.S.E Numbers and Deuteronomy with Dolby Atmos
(Credit to @guitardedhero + @Ben Feutrill - A.R.I.S.E Audio mod - XDA thread here )
ViPER4Android 2.3.4.0 with Super quality audio driver or the new 2.5.0.5 with driver pre-installed (credit to @viper520 + @zhuhang)
- for more info on V4A, visit the WEBSITE or XDA thread
Sony Xperiaâ„¢ Z5 Premium audio system
Beatsâ„¢ libraries and effects
Dolby Atmosâ„¢
All mods are System Wide
Rom also includes...
Rooted, Busybox
deodex/Odex hybrid
3Minit Battery Mod Option - (credit to @gharrington)
- for more info on 3Minit Battery, visit the WEBSITE or XDA thread
3Minit Clock Mod Option - (credit to @gharrington)
- for more info on 3Minit Clock, visit the XDA thread
Potato Clock Mod Option - (credit to @mariozawa)
- for more info on Potato Clock, visit the XDA thread
Navbar swap back and menu buttons
Zipaligned where appropriate
All display rotations
Navbar size options
System ui dpi options
Dynamic Navbar
Headphone volume warning disabled
Layers and ready
Rom does not include...
This rom is debloated, meaning i have removed...
Google apps, there are google apps that are avaliable on the play store that have been removed.
How to install...
The usual thing here, I use TWRP so can only recommend that recovery, but i am sure you will be fine with others.
If coming from another Version Base, vendor.img may need to be flashed.. Do this BEFORE flashing the rom!
Make sure WETA zip file is in your internal SD card, and head to recovery and flash the rom zip file. Reboot.
ENCRYPTED DEVICES - If you have your data partition encrypted, and you have set a "Device pin" you are going to have issues with system UI unless you disable device pin in security settings before flashing rom.
Changelog...
V1.0.1
Fixed Center Clock FC
Added 480dpi option
V1.0
First build, MHC19I base
Deodexed
Zipaligned
Debloated (apps available on Play Store)
WETA selected audio drivers and mods (HTC, Sony)
V4a with pre installed super quality driver
Added 400+ IRS convolvers (v4a)
Dolby Atmos pre installed
Center clock option
3minit battery option
V1.1
This release may need a fresh flashing of vendor.img prior to flashing rom zip.
Bootloader and Radio will be supplied also.
Updated to MHC19Q - April Security Patches
Added AK Kernel Option
Added Sony Clear Audio
Added Sony Xloud
Added OTA function
Build.prop tweaks
- Tethering activated
- Miracast activated
- Speed tweaks
V1.2
Fixed V4A convolver location
Added Potato Clock mod, (replaces center clock)
Added OTA functionality and app
Updated AK Kernel to V.063
V1.3
Fixed Potato clock for all orientations
Added Boost call audio option
Added Emoji options
Added Ad Blocker option
Added Systemwide V4A+Dolby option
- Be aware, this option may change normal volumes.
You use this mod at your own risk, damage to speakers,
may occur if used incorrectly.!
I advise that you flash vendor.img again before flashing the rom. Also if you get systemui crashes, remember that if you have been using layers themes then you may have to wipe data. In most cases wiping dalvik and cache will be fine.
V1.4.1
Disabled wake on unplug
Allow all rotations
Enabled wifi display
Disabled safe volume warning
Enabled Double tap to wake (all kernels) settings/display
Navbar resize to 36dpi option
Removed custom kernel options for stability. Flashes stock kernel automatically,
V1.5
Option to Disable Force encryption.
- Full sdcard wipe needed to complete this, so beware.
Added Dynamic Navbar to Aroma
- This mod colours the nav bar to the status bar colour.
*some apps like facebook, haven't updated to allow
for this yet.
Added WETA Reboot app
- built from source, Github Source Code
V2.0
Updated to MHC19T - May Security Patches
Updated busybox ro 1.24.2
SELinux mode option (permissive by default)
Added AOSP Browser, cLock, Eleven Music Player
Kept Google Music
V2.1
Great Audio Update...
- A.R.I.S.E audio mod now takes over from
my audio mods (WETA) due to its superior sound.
I have no problem bowing down to something so good.
-- A.R.I.S.E V1.2 with lenovo Atmos installed by default
Thanks and credits goes to @guitardedhero + @Ben Feutrill
A.R.I.S.E Audio mod - XDA thread here
Updated SuperSU tp 2.72
Kernel mods (init.d, insecure, no DM-verity, no forced encryption)
Updated Adblock hosts file
Updated Emoji to latest unicode 9
Updated ios, twitter emoji
Pre Installed Android N Keyboard
Added/updated on-boot system performance tweaks
- auto zipalign, mediaserver killer for battery, log cleaner
Network tweaks, fstrim, sqlite, ram management
V3.0
Updated Base to MTC19V - June security patches
Updated SuperSU to V2.74-2
Sound Mods from V2.1 continue in this version
Fixed lags experienced in V2.1
V3.0.1
Fixed Streaming video issues
Fixed Streaming music issues
Fixed audio not being system wide
Updated Google Camera
Updated WebView
Removed Battery percentage from Notification pull down
Removed Battery percentage from lockscreen when charging
V3.1
WETA is now a Deodex/Odexed hybrid for stability
Reverted SuperSU to V2.68 for stability reasons
A.R.I.S.E Updgraded to Exodus RC1 (amazeballs)
Fixed Stock SystemUI.apk
- Stock SystemUI will work with encrypted devices with device startup pin active
If you want status bar mods, you need to flash stock SystemUI first, boot, disable the Device Startup Pin, and then you can flash WETA again but this time selecting your mods.
Added default music player options to Aroma
- Sony Walkman
- Eleven
- Google Music
V3.2
Updated A.R.I.S.E to Exodus RC3
build.prop audio tweaks
New Emoji options
Fixed su.d scripts
V3.3
Updated to A.R.I.S.E Exodus RC6
Updated EmojiOne to V2.2
Added Super and High quality driver options for V4A
V3.4
Updated A.R.I.S.E to Exodus RC8.1
Added WETA A.R.I.S.E tweaks for 6p
Added NavSwap, swaps Back and Recents buttons
V3.7
Updated 3Minit Battery app and smali
Replaced Potato Clock with 3Minit Clock
- Potato clack can be re added if there is a demand for it
V4.0
Updated ROM base to MTC19X
- July Security patches
V4.1
Fixed ADB issues
Updated SuperSU to 2.76
Potato Clock restored as an option in Aroma
V4.2
*flash vendor.img before this update!
Updated A.R.I.S.E to Leviticus V1.1
- includes major debloating of sound system
- includes V7.0 Dolby Atmos
V5.0
Updated ROM base to MTC20F
Updated A.R.I.S.E to Leviticus V1.3
Disabled lockscreen rotation
Enabled all VoLTE instances in framework
- this may or may not activate VoLTE
7.0 fixed (Nougat)
***kernel install fixed
***Vendor now gets installed automatically
Updated to NRD90M Nougat
Updated A.R.I.S.E to Numbers V1.8
Added Nexus Launcher
All mods in WETA Extras zip
7.0.1
Fixed systemwide audio processing
Activated NavBar mods in Systemui tuner
Fixed sim issues for some folks
*updated extras zip with mods above
7.1
Updated A.R.I.S.E to Numbers V2.1
Changed a few things in framework for better connectivity
updated sony walkman
7.2
Removed Vendor.img from install
- I will include the vendor only for new rom bases from now on
Updated SuperSU to 2.78
Updated A.R.I.S.E to Numbers 3.0
Updated V4A to 2.5.0.5
Added Encore Music Player option
Added Sony Walkman install option
Added optional Dolby Atmos install
7.3
Added back Vendor.img Flashing with rom
Updated A.R.I.S.E to Numbers V3.2 (fixes)
Added V4A cross channel irs convolvers (JoeBloggs)
Added Seperate Esira Music Player install option
*Esira is a basic music player developed by the A.R.I.S.E team.
*driver io and viper app issues should be fixed
*Dolby Atmos should be fixed
7.4
Updated A.R.I.S.E to Numbers V3.4
Added system DPI option (again)
Removed Vendor img install (again)
Added WETA stock V4A installation
- this should fix v4a not showing
in app drawer, and io errors
7.5
Re-configured how rom is built
Added V4A app version options
Tweaked systemwide audio (soundcloud fix)
Tweaked and re-added in-call volume boost
*Install should be trouble free now
*Supersu has a known bug where sometimes, the app wont show in drawer, simply install supersu app from playstore. Binaries will be already installed.
8.0
Updated to NRD90U base
Updated A.R.I.S.E to Numbers V3.5
8.1
**Wipe data,dalvik and cache. Also flash vendor.img before flashing.
Added Magisk/Phh root option
Added WETA Audio option (no arise)
***V4a, Dolby and weta reboot will only work with magisk if you set magisk to permissive.
8.2
PLEASE READ (applies to magisk users only)- because the permissive setting is stored within the magisk.img.. if you backup data then wipe and restore data after the rom flash then you wont get permissive by default.
These are your options... 1, go into root explorer and delete /data/magisk.img before you go to twrp to backup
or 2, dont restore a backup
or 3, if you have already downloaded and installed V8.2 and a backup, you can dirty flash 8.2 over the top to fix problem
or 4, i dont usually recommend this, but dirty flashing should be fine this time around
Changes
Set SeLinux to Permissive by default for Magisk install
- V4A and Dolby only work in Permissive mode with magisk.
Removed DPI options, see Dev Settings screen size adjust
Fixed WETA Audio V4A install
Added Tethering hack
8.3
Added some goodies to WETA Audio
- Sony, HTC Beats, and ALSA drivers and libs. (sounds great)
Hopefully fixed Magisk/PHH apk install
8.3.1
Fixed low call audio with WETA Audio
Extras 8v2
3Minit Clock now hidden in lockscreen for all orientations
8.4
Added OTA Updater
8.5
Added A.R.I.S.E Deuteronomy to aroma
9.0
Updated to NBD90X base
Added vendor.img to this update
9.1
Updated SuperSU to 2.78 SR1
Added Suhide 1.54
Removed Magisk
Removed Vendor until next big update
Extras 9v1
Added a bunch of fonts
9.2
Updated ARISE Deuteronomy to V1.86
9.3
Updated ARISE Deuteronomy to V2.0
Updated Suhide to 0.55
Removed ARISE Numbers
Added Google Assistant
9.4
Updated Busybox to 1.25.1
Updated ARISE to deuteronomy V2.1
Extras 9v2
Updated IOS emoji to IOS 10
WETA 10
Updated Base to NBD91K
Updated ARISE to Deut 2.3.3
Removed root for this build. (issues)
– This means you need to manually root with CF-Autoroot which can be found - HERE
- Rooting should be done after flashing the rom, reboot back into fastboot to flash root.
- And the instructions are on this page - HERE
WETA 10.0.1
I decided to add SuperSU 2.78 SR3 to auto install with rom as some people are getting good results, and it tested out good for me after a clean install.
- If you have any issues with root use CF-Autoroot
WETA 10.0.2
Updated SuperSU to 2.78 SR4
- Booting looks hopeful
Extras 10v1
updated for WETA 10
WETA 11
Updated to NMF26F
Extras 11v1
Updated compatibility to NMF26F
Removed 3Minit clock (issues)
Added Center Clock
WETA 12
Updated to N4F26J
Do not flash Gapps with this ROM!
Because this is based off of stock android, gapps are included.
ROM Download Page
Wiping data, cache and dalvik is recommended.
Wipe Data if you are coming from another rom or version base, have crashes or other issues before reporting.
Flashing of vendor.img should be done BEFORE flashing the rom if you want all functionality!
TWRP 3.0.2-2 is needed for Nougat roms onward.
TWRP 3.0.2-2 - Download
Kernel source - https://android.googlesource.com/device/huawei/angler-kernel
WETA Reboot source - https://github.com/daxgirl/6thGear-Reboot-App
CM version sources - https://github.com/CyanogenMod
If you like my work, please consider buying this poor guy a craft beer for his efforts
This rom is built from a stock google rom image and doesn't require source links.
------------------------------------------------------------>
Credits...
@Chainfire
@viper520 , @zhuhang for Viper4android
@gladiac for Forced Encryption disabler, xda thread - http://forum.xda-developers.com/and...-fed-patcher-v8-forceencrypt-disable-t3234422
@guitardedhero for general audio mod inspiration, up to date system files.
@guitardedhero + @Ben Feutrill - A.R.I.S.E Audio mod - XDA thread here @tupac4u for general help with Nougat
XDA:DevDB Information
WETA, ROM for the Huawei Nexus 6P
Contributors
Mentalmuso, mentalmuso
ROM OS Version: 6.0.x Marshmallow
Created 2016-04-02
Flashing Instructions Nougat based rom
1. Wipe Data, dalvik and cache
2. Flash Vendor
3. Flash radio and bootloader if needed.
4. Flash Rom
5. First boot approx 2min
--->
Common Questions
How do i hide stock battery?
How do i mod NavBar?
- Both of these can be found in system ui tuner. You activate this by swiping down the notification pull down and pressing and holding the settings cog until it vibrates.
This turns on a new menu in Settings called systemui tuner, its all in there. If the cog doesnt vibrate. You may need to change your animation scales back to 1x within dev settings.
SystemUI keeps crashing
- Most likely this is a theme issue, especially after a dirty flash. Uninstall all themes and the apps. Flash vendor.img, wipe dalvik and cache, and rom again.
If its happening at boot time right when your device is asking for a password, then you need to flash stock rom and disable device boot security pin. Its a problem with encrypted devices and modified SystemUI.apks
Why is my battery life crap?
- Start by looking at your custom kernel, or by looking at user apps you use. Also simply constantly watching your battery is a battery drainer. The rom is seldom at fault with battery drain problems, and if it is to blame, then it is most probably and upstream google issue and not WETA.
Where is AdAway?
- If you flashed adblocker, then that is what you flashed, not AdAway. These are different things. Adblocker is a simple replacement of your stock hosts file that in turn blocks ads.
How do i get Stock clock back? How do i remove adblocker? How do i get stock NavBar height back? How do i Get A.R.I.S.E back?
- This is so simple and if you ask any of these types of questions... then i slappa yo face..
Just dirty flash the rom again. Select what you want
What is WETA Audio?
WETA Audio is an alternative to flashing with A.R.I.S.E. It replaces A.R.I.S.E with my own setup consisting of V4A (2.5.0.5 or 2.3.4.0, optional Dolby Atmos and drivers and effects from Sony, HTC and ALSA drivers. Its a more simplistic approach to what A.R.I.S.E offers which some people were requesting. Its my go to setup now also.
mentalmuso, can you add advanced reboot menu to power button? can you add volume skip track functionality?
- Short answer, No. This rom is built from stock prebuilt google images and is the reason why its mostly so stable. mods like this require building the rom from source code, which is something im not prepare to dive into at this stage. It takes too much time out of my life and requires a bigger SSD hard drive than i have at this time. Maybe ill have interest in this in the future, if i lose my job or something.
mentalmuso can you add CM visualizer to navbar?
- This mod requires the system to have signature check verification to be disabled. Although its a cool mod, thats one security risk i wont implement.
Why is there no SuperSU app, or Why is there no PHH superuser app?
- The root apps get installed to the /data partition at installation. This means sometimes there is a conflict as you may have left over data from a previous installation. This can be remedied by simply finding the app you need on the play store and installing it. No big deal. The Root binaries would have been installed properly.
Will CMTE be coming to this rom? What about OMS support
CMTE and OMS require a rom to be built from source so commits can be added. I'm not going to build from source.
Where are the extra fonts??!!
stock Android has no way of changing the system font. And WETA can't change that. It pre installs fonts for third party apps to use. Such as 3minit clock
--->
Reserved
Nice. Why general section though?
Sent from my Nexus 6P using Tapatalk
Nasty_z said:
Nice. Why general section though?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
You know what, i dunno. This always happens to me haha. I'll get it moved.
--->
Mod can you please move this to Android development section please? @MikeChannon
Sounds sweet! Will take it for a rocking spin
Mentalmuso said:
Mod can you please move this to Android development section please? @MikeChannon
Click to expand...
Click to collapse
He isn't a moderator, he's the forum admin. If you need threads to be moved please just use the report button on the first post in future. I've done this for you already.
Heisenberg said:
He isn't a moderator, he's the forum admin. If you need threads to be moved please just use the report button on the first post in future. I've done this for you already.
Click to expand...
Click to collapse
Thanks!
Sent from my SM-G920F using Tapatalk
Mentalmuso said:
Mod can you please move this to Android development section please? @MikeChannon
Click to expand...
Click to collapse
Yes, please just hit report in the future, instead of the mention system, especially mentioning Admin. :silly:
Please address your kernel source before this is moved. See this thread for more, http://forum.xda-developers.com/showthread.php?t=2645321
Let me know when this is handled and I will move this. :good:
Cheers,
Darth
Forum Moderator
Added to Nexus 6P index thread:
[INDEX] Huawei Nexus 6P
Darth said:
Yes, please just hit report in the future, instead of the mention system, especially mentioning Admin. :silly:
Please address your kernel source before this is moved. See this thread for more, http://forum.xda-developers.com/showthread.php?t=2645321
Let me know when this is handled and I will move this. :good:
Cheers,
Darth
Forum Moderator
Click to expand...
Click to collapse
I have updated the op with kernel source. Located under the downloads section. Thanks
I like the ROM that include Viper4Android.
Just installed and running fine so far...working on a full charge and battery life test next
Sent from my Nexus 6P using XDA-Developers mobile app
BakedTator said:
Just installed and running fine so far...working on a full charge and battery life test next
Sent from my Nexus 6P using XDA-Developers mobile app
Click to expand...
Click to collapse
Battery life should be about the same as stock build. I like the fact that Viper4Android comes pre-installed with all the convolvers
Sent from my Nexus 6P using Tapatalk
Battery life is exactly the same as stock... Loving this so far... Thank you
Sent from my Nexus 6P using XDA-Developers mobile app
Think I'll give this a try later today. Thanks so much.
Just flashed this rom but getting FC when opening dolby app. Also, in viper, after going through the set up and rebooting, the settings aren't sticking. I mean I'm having to run the set up again and again. Did a fresh install and flashed the latest vendor image after the rom as well.
That's kind of weird, I had no problems what so ever...I tried installing it with center clock and got system ui force closes, but reinstalled with stock settings and everything is fine...can you pull a log for the dev?
Sent from my Nexus 6P using XDA-Developers mobile app
spuri78 said:
Just flashed this rom but getting FC when opening dolby app. Also, in viper, after going through the set up and rebooting, the settings aren't sticking. I mean I'm having to run the set up again and again. Did a fresh install and flashed the latest vendor image after the rom as well.
Click to expand...
Click to collapse
Ok, now that you have flashed the Vendor image, you shouldn't need to flash it again as the rom won't format the vendor partition. So im assuming by fresh install you have wiped all data and caches? Are you using the stock kernel that gets flashed with the rom? Flashing the Vendor.img after the rom may actually cause a problem with v4a and dolby just thinking about it.
EDIT: also what rom were you previously on?
--->
Build 12/01/2019 #OPO #N
TugaPower ROM G+
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower N 65.0 LineageOS #laos #OnePlus #Android 7.1.2r36 #OMS7 #SubstratumRootLess
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
Please be sure you are using one TWRP that can handle firmware flash. ( http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366 )
Also be sure you are using proper firmware. The one recomended its the one from cm 13 nighly, you can find here: https://meocloud.pt/link/c1d9a297-e3f7-480b-9567-1bc601c073dd/TugaPowerFirmwareCM13_v4.zip/
Relative to gapps, testing open gapps 7.1 nano package, working without issues
http://opengapps.org/?api=7.1&variant=nano
Replaced built in OTA by OTA Updates app ( https://github.com/MatthewBooth/OTAUpdates )
Replaced audiofx with Viper4Arise 2.4 ( https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709 )
Disable manually AudioFX to hide the icon from drawer
Kcal Support ( use Color Control app to adjust colors )
Gello removed and replaced by latest TugaBrowser ( built in OTA for the Browser ) ( blocks ads and protect privacy)
TugaBrowser -> http://forum.xda-developers.com/android/apps-games/app-tugabrowser-t3472457
Call Record
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616 )
No more need to make microG system app
Multi-ROM Support
Increase max chg current to 2000/500mA
Kernel permissive
PoGO: Gonna catch then all
Partial screenshot ( activate screenshot on power menu button and long press there to activate partial screenshot )
Full support to Substratum OMS7 RootLess
Powered by Magisk root v16.x
Replaced Trebuchet with latest Lawnchair beta ( https://github.com/Deletescape-Media/Lawnchair )
3 finger screenshot support
What does not works:
Let me know to add here
Be sure you dont have an older Magisk module called Android Pay Fix on Magisk or NFC will start to FCing
Change log N65.0 :
Project name: android
December Security Patch
Updated Lawchair to Alpha 783
Updated Magisk Cannary Release to latest version
( use https://bit.ly/2N8UVlq in custom magisk channel )
Project name: android_external_v8
Remove unrecognized compiler flag
Revert "Backport: Fix Object.entries/values with changing elements"
Project name: android_frameworks_av
CTS error while media dump()
Project name: android_frameworks_base
Recover shady content:// paths.
Pass userId through to singleton ContentProviders
This android version is the last update, no more updates to Nougat
It was a long run...
Thanks all for the support.
Download: https://tugapower.net/TP/OP1/NOUGAT/TugaPowerN65.zip
MD5: 272a0ea5dd43041d0b45a11f1470c8bb
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Kernel:- https://github.com/LineageOS/android_kernel_oneplus_msm8974
Yeah, downloading. Android 2.3 GingerBread, i was waiting so many time for this, thanks!
UPDATE:
Installed and booted. First impression: this is not 2.3 GingerBread, i've been tricked by daniel.
Alright, in case some people want to know some first impressions:
Everything is working fine, even the backlight hardkeys.
It has some features like CM13: livedisplay, privacy guard, in-root working, custom action buttons and some other stuffs.
You can directly flash the rom with the gapps and it will not show any error (tested with opengapps nano 09/17/2016). Also flashed viper4andoid with no problem.
Adaway working with no need to install busybox.
A bug i found is that i cannot change the custom battery icon from the CM options.
To be the first build it's really great. The only things i miss are CM Theme manager and KCAL control but i'll be patient to see them in futures updates.
Thanks for the work daniel.
UPDATE 2:
With the purpose to clarify some possbile doubts i'm going to say what you need to do to get KCAL color control, Multirom support and themes. This might be useless in future updates.
Although it's not recommended so it can affect the stability and perfomance of the rom, if you are desesperate (like me) to get this features you can follow this steps. Do not report bugs to daniel related to kernel, storage, interface or FCs that could be related to the following steps if you follow them, you're using mods unrelated to the rom.
-For KCAL color control you need to flash a custom kernel compatible. I've tested Radioactive kernel and works with no problem. I repeat: This is not recommended because might cause incompatibilities, but just in case you want to get KCAL and other features related to kernel you can do it at your own risk to bugs.
-For flash it as secondary rom with multirom follow the steps from @venky716 and give him thanks: http://forum.xda-developers.com/showpost.php?p=68727289&postcount=37
Edit: KCAL control and MultiROM support already implemented.
-For themes i installed substratum. What you can do and what you can't do: You can use the theme manager with user apps like whatsapp, kernel adiutor, twitter, etc but if any change is implemented in system components you could get a boot-loop. I didn't tested system apps but i would not recommend it.
Good job Daniel. Downloading now.
Best ROM ever.
Very cool.
Sent from my A0001 using XDA-Developers mobile app
Thank you very much for this build and your hard work. I'll give it a try.
Sent from my A0001 using XDA-Developers mobile app
CM kernel?
Sent from my A0001 using Tapatalk
Thanks for work! Did NFC working?
Sent from my A0001 using XDA-Developers mobile app
This is amazing. Sorry to say but I didn't liked your 6.0 builds. Don't know why. But definetly I'm going to try this out.
Any suggestion? Should I be F2FS or EXT4?
How I can login into your browser?
Another Android 7 ROM for OPO by a great dev! Thank you for your work! Will try it soon!
thnx for effort
downloading now...
thanks for building this rom...
Hi,
first of all thank you for your work @danieldmm.
Flashed it right now and currently using the system.
Great work so far. Got system as ext4 and data and cache as f2fs formatted and it works.
However, "Anomalies" i have witnessed so far:
1. Settings -> Status Bar -> Hitting "Status Bar Icons" crashes and opens Settings again.
2. Changing the Battery status style does not change the icon
3. Camera crashing instantly after u open it.
Thats all for now since i did not use the system long but will report further bugs if any occur.
I should wait for tomorrow to do this. But will I ...
Gesture typing on aosp keyboard doesn't work ATM... Using google one instead
f2fs compatibility?
edit - i would think at this early stage a pointer to the gapps that works is probably a good thing. my thought is that as a developer point to the preference of what you have built.
and then you run away from what should I get?
milomak said:
f2fs compatibility?
Click to expand...
Click to collapse
data and cache, will test on system on my next release...
but tuga i think point a link to the gapps you used. in your op. or are they included in your download?
i've used and contributed to you.
but i think this needs to be clear
edit - only because as we move from place to place, some have have. some don't.
Weird. I can't receive snapchat sms for auth :/
milomak said:
but tuga i think point a link to the gapps you used. in your op. or are they included in your download?
i've used and contributed to you.
but i think this needs to be clear
edit - only because as we move from place to place, some have have. some don't.
Click to expand...
Click to collapse
It's written. Gapps advised it's Open Gapps Nano Package. Obviously the package for Android 7.0. Tomorrow will add the info on the thread to be more explicit. Cheers
Also notice at least for Google messenger when you pull down from status bar to reply to a text the notification doesn't go away
IF YOU'RE COMING FROM ANOTHER THREAD OR SITE, AND RUNNING THESE MODULES ON A DEVICE OTHER THAN A 3/3T, DON'T POST YOUR ISSUES HERE!
THESE WERE STRICTLY CONFIGURED FOR THE 3/3T ON OXYGEN OS!
Here are a few I've put together after snooping around the OnePlus threads and converting various mods into modules.
These modules WILL NOT work on Magisk builds older than 13.
I have a folder of modules for Magisk 11 and older (no longer maintained, nor supported) at the end of this post.
Requirements:
- Stock OxygenOS 4.1.6, Open Beta 12, or newer.
- Magisk 13.3 installed by following the installation guide: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
After installing, download any module and flash in TWRP.
NOTE: None of these modules are SystemUI or framework mods as doing such have potential to cause soft bricking, leading to doing a factory reset.
Magisk modules
Google Pixel Launcher with Essentials and Extras v2.0
Includes Pixel Launcher, along with the Google's Wallpaper Picker, and the Live Wallpapers APKs from the Google's Pixel factory image.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Pixel Launcher to 7.1.13862848
- Updated Nexus Launcher Icons to 7.1.2
- Updated Google Wallpaper Images to 20161104_RC01
- Updated Wallpapers to 1.1.153125266
- Updated Live Earth Wallpapers to 7.1.2
- Updated Live Data Wallpapers to 7.1.2
-----------------------------------------------------------------------------------------
Google Pixel Sound Set v2.0
Replaces the stock OnePlus UI, alarm, notification, and ringtone sounds with the set from the Pixel phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated sounds to match the Android O beta image for Google Pixel.
-----------------------------------------------------------------------------------------
Google Dialer with CallerID and Lookup v2.1
Google Dialer, along with the permissions XMLs and required framework to allow full functionality, including Caller ID and Lookup. Be sure to disable the stock OnePlus Dialer, and set Google Dialer as default.
v2.1 Changelog:
- Replace OPSystemUI with a blank template for Magisk as recent versions of OOS causes conflict with Google Dialer's Answer/Decline buttons.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated Google Contacts to 2.0.10
- Updated Google Dialer to 10.1.161735957
-----------------------------------------------------------------------------------------
Google Daydream VR v2.0
Allow the use of using Daydream VR, and enables downloading of additional Daydream apps from the Play Store.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- android.hardware.vr.high_performance.xml (taken from a factory image for the Google Pixel) is now included
instead of editing another XML with the needed entries
-----------------------------------------------------------------------------------------
Chrome Home Page Button v2.0
Enables the home button in Chrome, and an option to set a default home page in Chrome's Settings.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Display SELinux Status (Enforcing/Permissive) v2.1
Expose the status of SELinux (Enforcing or Permissive) at the bottom of Settings > About Phone.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
EmojiOne Emoji Set v2.0
Swap the default emoji set from OnePlus with the ones from EmojiOne.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the emoji set to 3.1.1 (July 12, 2017)
-----------------------------------------------------------------------------------------
Android O Emoji Set v2.1
Swap the default emoji set from OnePlus with the ones from Android O.
v2.1 Changelog:
- Updated the emoji set with the ones from Android O Developer Preview 4.
More information about the changes here on Android Police.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
2.4GHz WiFI Channel Bonding v2.0
As OnePlus (still) haven't fixed this, the module combines two 20MHz channels on a 2.4GHz WiFi connection into one for improved Internet speed.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Allow AudioServer/MediaServer Access v2.1
Apps such as ViPER4Android needs access to AudioServer (or MediaServer in other ROMs) to work correctly, while the kernel is set to Enforcing.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Updated the script to execute sepolicy-inject in the new location with Magisk 13.1+ (again...)
Update: Removed. No longer needed since this module was added back into the ViPER4Android packs.
Update 2: Restored.
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) v2.1
Not much to say about this module, except that this version, in my opinion, is the last version which allows selecting 3 different quality drivers. This one runs the Super High Quality driver.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
ViPER4Android FX 2.3.4.0 (Super High Quality) with Dolby Atmos 6.5 v2.1
Same as the ViPER4Android module above, except this one includes Dolby Atmos 6.5.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
- Removed the sepolicy-inject script in favor of a separate module (Allow AudioServer/MediaServer Access) for easier maintenance
v2.1 Changelog:
- Re-added the AudioServer/ModuleServer script into this module since for some reason, having it separate was causing devices to not boot.
- There is no need to use Allow AudioServer/MediaServer Access with this module.
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base v2.5
This module installs the needed files for use with ViPER4Android version 2.5.0.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
NEW
ViPER4Android FX 2.5.0.5 Base with Dolby Atmos 6.5 v2.5
This module installs the needed files for use with ViPER4Android 2.5.0.5, and also installs Dolby Atmos 6.5. A version 2.5.0.5 app of ViPER4Android (Original or Materialized) must be sideloaded as it is not included in this module.
More information here: https://forum.xda-developers.com/showpost.php?p=73357433&postcount=450
v2.5 Changelog:
- Initial release
-----------------------------------------------------------------------------------------
Gaming Controller Keylayouts v2.0
Adds keylayouts for use with Xbox 360, Xbox One, Xbox One S, and Nvidia Shield controllers.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Stereo Speaker and Microphone Gain Tweak v2.0
Created by @magura320, this module allows the earphone to be used as a speaker, and mods the microphone pickup when recording video.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
-----------------------------------------------------------------------------------------
Extended Volume Steps v2.1
Extend the media volumes to 30 steps, and the call volume to 15 steps. Credits to the article on the front page of XDA by Mishaal Rahman.
v2.0 Changelog:
- Updated the module to conform to Magisk 13.1+ template
v2.1 Changelog:
- Removed unneeded files from the module as leaving them in could cause problems with the device booting properly.
-----------------------------------------------------------------------------------------
Magisk-ready modules
Busybox Installer 1.27.1
Created by @osm0sis, this version of Busybox has never given me any problems during my use. Highly recommended.
Simply flash in TWRP. The installer will detect Magisk, build the module, and install it.
Be sure to disable Busybox in the Magisk Manager app, followed by rebooting to make use of this.
-----------------------------------------------------------------------------------------
Folder dump of old Modules for Magisk 11 or lower
Note: Modules in this folder are no longer supported or maintained. They are here in case someone out there still wants to use them.
Very helpful thread thanks
is your snapdragon camera extremely buggy? Only a few features work for me.
Most of the mods just need root..can be SuperSU also..
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
knpk13 said:
Pretty nifty stuff. I'm assuming you can't make a center clock magisk module, can you?
Thanks for the modules! The ones I've downloaded so far seem to work except for the Snapdragon camera, which doesn't open.
Edit: nevermind the camera works after granting permissions manually.
You might want to consider adding these modules to the magisk repo.
@Spasticdroid how would you compare your aptx module to this one? https://forum.xda-developers.com/apps/magisk/magisk-oneplus-3-aptx-res-audio-t3541904
Click to expand...
Click to collapse
For the center clock mod, I assume that would fall under modding SystemUI.apk or OPSystemUI.apk. I've tested a few mods from this sub-forum in the form of modules, and ended up having to factory reset my phone after disabling that module.
As for the codec, this one has the APT-X HD library included.
Thanks a lot for this awesome thread and these infos
all works like a charme
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Long post reply about GPM here: https://forum.xda-developers.com/showpost.php?p=70804660&postcount=11
Short reply, run ViPER as "Compatible" under FX Compatible Mode for use with GPM.
I've tried disabling anything that has remotely anything to do with audio, which seems to be Dirac and Dirac Control Service on this phone, to solve the issue, but no go.
Also, you don't have to run your kernel in Permissive with this module of ViPER. It's already set up to allow running in Enforcing.
matthias4 said:
I installed the Root, Busybox and the Magisk as recommended in your walkthrough.
I'm especially interested in Viper, but I have an Issue. It seems that the effect will apply to all other apps (youtube for instance), but not to Google Play music. I tried playing with the settings... My selinux is permissive, the drivers are fully activated (viper), but I fear it has to do with the fact that google play music tries to access the OP3T's standard equalizer, which cannot be bypassed by Viper.
If I were to take a wild guess, I'd say that replacing the menu from /Sound/Audio Tuner from the default OP3T to Viper should help Google Play music. Any ideas?
Click to expand...
Click to collapse
Sooo I looked here and there and foud that the FX Compatible mode fixed it. Play Music works with Viper again. Thanks OP for the great pack. That bass, though.
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
How about Google pixel navibar ?
weriwd said:
Is there any way to rever to stock speaker configuretion? Just wondering before flashing the mod.
Click to expand...
Click to collapse
Disable or uninstall the magisk mod
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
kinfam said:
Hey great work! Thanks for this.
I do have a question though, what's the difference between your Google assistant vs the one available to download within magisk?
Thanks!
Click to expand...
Click to collapse
I never bothered with the download menu in Magisk, but I just took a look, and mine does the same thing the one on the Magisk repo does, which is adding the "ro.opa.eligible_device=true" to build.prop, and not spoofing a phone as a Pixel. Something a lot of older non-Magisk mods do.
Same with the EmojiOne module.
As for the Controller Keylayout module on the repo, it's also similar, except mine has the keylayout files for the Nvidia Shield Controllers included.
saberzaid said:
How about Google pixel navibar ?
Click to expand...
Click to collapse
Not doing that as that requires System UI and/or framework-res.apk modding. Similar reason why is explained in this post: https://forum.xda-developers.com/on...gisk-modules-oneplus-3t-t3548446/post70826963
Great mods
I'm using a bunch on Oneplus 3 with open beta 11, if anyone wanted to know for compatibility reasons
You know that aptx wont work.
The HAL and hardware doesnt support it.
I have install viper addon but dont see the app. How can i start viper? Stereo Mod also not work.
pahapoika91 said:
You know that aptx wont work.
The HAL and hardware doesnt support it.
Click to expand...
Click to collapse
Source(s) for this claim please.
I have successfully installed GravityBox on Kenzo running Cosmic OS which is based on Android 8.1 Oreo
mod edit - content removed
How stable is Xposed and Gravity box in beta stage?
Are you facing random force close?
GravityBox - all-in-one tweak box - Xposed module for devices running Android 10
Version 10.1.2 [Q]
Version for JellyBean is available in this thread: https://forum.xda-developers.com/showthread.php?t=2316070
Version for KitKat is available in this thread: https://forum.xda-developers.com/showthread.php?t=2554049
Version for Lollipop is available in this thread: https://forum.xda-developers.com/showthread.php?t=3037566
Version for Marshmallow is available in this thread: https://forum.xda-developers.com/showthread.php?t=3251148
Version for Nougat is available in this thread: https://forum.xda-developers.com/showthread.php?t=3653953
Version for Oreo is available in this thread: https://forum.xda-developers.com/showthread.php?t=3739929
Version for Pie is available in this thread: http://forum.xda-developers.com/showthread.php?t=3908768
READ THIS POST CAREFULLY BEFORE PROCEEDING ANY FURTHER
Introduction
The app utilizes Riru and EdXposed Magisk module which uses original Xposed Framework API created by rovo89.
!!!!!! WARNING !!!!!!
This module utilizes EdXposed Framework which is still in early development stage and may contain bugs or might not be fully compatible with system of your Android device. I take no responsibility for any issues arising from using GravityBox with EdXposed and strongly recommend creating a full backup of your device before activating the module.
Requirements
- Magisk v19 or later
- Riru v19.5 or later (Magisk module)
- Official EdXposed release (Magisk module)
(CHOOSE WHATEVER VERSION WORKS BEST ON YOUR SETUP - EXPERIENCE SHOWS THAT DIFFERENT VERSIONS WORK DIFFERENTLY ON DIFFERENT DEVICES/SYSTEMS)
- EdXposed Manager (Application)
- Avoid using Resource hooking support if possible (Can be disabled in EdXposed Manager settings)
Installation
This procedure assumes you have working Magisk installation.
1) Install Riru and EdXposed modules using Magisk Manager
2) Install EdXposed Manager app
3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
4) Install GravityBox and enable it in EdXposed Manager
5) Reboot
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
they are enabled in module settings. This is EdXposed limitation/glitch
Feature highlight
--- Lockscreen tweaks
--- QuickSettings tile management with additional tiles
--- Statusbar tweaks
--- Navigation bar tweaks
--- Pie controls
--- Power tweaks
--- Display tweaks
--- Phone tweaks
--- Media tweaks
--- Hardware/navigation key actions
--- GravityBox Actions - interface for 3rd party apps
--- Notification control (per-app notification LED/sounds/vibrations)
--- Fingerprint launcher
--- Advanced tuning of Framework and System UI parameters
... and many more
Compatibility
GB's main concept is to make most of the preference changes to be done on the fly without need to reboot a device to achieve custom-ROM like experience.
This means it is not possible to "completely deactivate" particular feature if it causes trouble on your device or if you installed GB because you want to use only one particular feature you can't find elsewhere.
This results in issues on ROMs/devices that have parts that are diverting from default Android implementation too much, or are running heavily modified custom ROMs.
If you experience weird issues after installing GB, even if you didn't activate a particular feature, it is not because of GB is broken, it is because it is not compatible with your ROM.
It is very similar to a situation when you installed ROM built from source for Nexus to some Xperia device - it won't work.
GB is a complex module and is not suitable for 1 purpose scenario. This means, if you are running custom ROM built from source, and you are missing a certain feature, your best option is to go ask creators of those ROMs to implement those additional features. Supplementing missing features on well-known custom ROMs built from source by installing xposed modules (especially complex ones) is definitely not a good way to go and can cause more trouble than good.
GB being a complex module, it shouldn't be combined with other complex modules often racing for the same goal. They can conflict/fight on the same playground and there's no way you can deterministically say which one's going to win. They can even lose both.
So in summary:
- this module is designed to run on vanilla or close-to-vanilla Android 10 (AOSP)
- officially supports devices/systems it was developed and tested on
- Samsung Touchwiz, HTC Sense, MIUI, LeWa, Xperia, Lenovo, etc. are NOT supported. It is not guaranteed this module will work on these at all so try at your own risk. This module is simply too complex to support all kind of ROM brands that were vastly modified by vendors.
- DO NOT USE WITH CUSTOM ROMS MODULE WAS NOT EXPLICITLY DESIGNED FOR
- I will not implement any exceptions that will adapt this module to a specific custom ROM. Please, do understand, it is unmanageable.
- I will not provide any support for devices violating these compatibility rules
GravityBox [Q] has been designed for and tested on
- OnePlus 7 Pro running OxygenOS 10
- Nexus 5X running Pixel Experience 10
- Pixel 3a running Google OS
Reporting bugs
If possible, please use Github issue reporting interface for reporting bugs.
If you experience problems with certain feature, provide the full-detailed info that can help me
to reproduce the bug and attach error.log file you'll find in:
/data/user_de/0/com.solohsu.android.edxp.manager/log
If you use different manager or there is no log file present, use ADB to capture log: adb logcat -s EdXposed-Bridge
In case you experience SystemUI crashes or other apps Force Closing, or device soft reboots, attach logcat from time
crash occurs. (use adb logcat *:E or your favorite logcat app from Play Store).
Please, don't attach big logs. Only the portion where error is clearly seen.
Disable all other xposed modules before reproducing bug to make sure it is really GravityBox related
Remember, this app was developed and tested on one particular device so it is not guaranteed that it will work flawlessly on yours.
Click here to read additional, more detailed info on Reporting bugs provided by @trjlive
Multilanguage support
Volunteers are welcome to translate GravityBox to other languages.
Simply download this file: https://github.com/GravityBox/GravityBox/raw/q/GravityBox/src/main/res/values/strings.xml
Use Notepad++ to edit strings and then send me edited file so I can include translations into next release.
Source code
GravityBox is opensource. Sources are available in my gihub: https://github.com/GravityBox/GravityBox/tree/q
If you're a dev and have some ideas for additional features, feel free to fork it, work on it and send the pull requests.
Copyright notice
https://github.com/GravityBox/GravityBox/blob/q/NOTICE
Support development
Coding, maintaining and supporting this project costs me a lot of my precious time. If you find this project useful, you are more than welcome to support its development via donation. This form of support is meant to compensate for my time dedicated to the community + eventually, help me to afford newer device to keep up with AOSP evolution thus providing continuous support as Android evolves. Thanks!
Info about premium features and PayPal transaction ID verification system
1) Those who supported development via PayPal donation can use their PayPal transaction ID to unlock premium features.
As of v2.9.5, there are two premium features:
- Backup/restore of GB settings.
- Ultimate notification control
2) If you contributed to the project by providing translations, code fragments, or by any other way
you can apply for a free transaction ID by contacting me via PM.
3) Be aware that there's a system that can identify potential transaction ID
abuse. E.g. when one ID is being used by more users. Such IDs will get blocked automatically.
This can also happen when you previously exposed your ID in public forum and other users took
advantage of it. If this is the case, contact me via PM so I can issue new, special ID.
In case you own more devices, you can use one transaction ID on up to 10 of them.
4) If you are using your own custom builds of GB for personal use, you will get hash mismatch
upon verifying your ID as verification system accepts requests only from official releases of GB.
If you want to be able to verify IDs with your custom build, contact me via PM so I can setup
a special hash for your build.
If you are using a custom build that you provide for broader group of users (e.g. in a custom ROM),
it is necessary to ask for new hash everytime your new custom version is released for public use.
These rules are based on mutual trust so please, do not violate them.
Credits
- RikkaW for creating and maintainng Riru Magisk module
- solohsu & MlgmXyysd for creating and maintaining EdExposed Magisk module
- @frank93 for donating Pixel 3a for development
- @bgcngm for his code contributions to the project
- @MohammadAG for Xperia specific contributions to the project
- @rovo89 for his ultimate Xposed framework and "Volume keys to skip track" mod
- @peptonib for starting me up with this project
- @simmac for app icon
- @romracer for Motorola specific code contributions
- @firefds for Samsung specific code contributions
- CyanogenMod project
- ParanoidAndroid project
- Slim, RootBox, AOKP, OmniROM projects
- Sergey Margaritov for ColorPickerPreference
- ArthurHub for Image cropping library
- All those who provided translations for different languages (Mr.Premise, peptonib, kidmar, ch-vox, romashko, Indiant, lelemm, oicirbaf, unavix, LuHash, WedyDQ10, mp3comanche, awaaas, liveasx, samsonbear, Eric850130, xtrem007, benjoe1, asmb111, Fatih Firinci, ...)
- and finally, all those who keep the project alive by supporting me via donations (you know who you are)
Changelog
https://github.com/GravityBox/GravityBox/blob/q/CHANGELOG.txt
Changelog 10.1.2 - 07/03/2021
- Clock: reverted to old hooking strategy for better compatibility
- Dialer: adjusted for compatibility with the latest Google Dialer
--- fixes muting Dialpad tones during UNC Quiet Hours
Developed and tested on:
- OnePlus 7 Pro running OxygenOS
- Pixel 3a running Google OS
- Nexus 5X running Pixel Experience
Current issues
- Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
- Key actions: Home double-tap not working
- Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
- Lockscreen: Changed custom carrier text won't appear immediately
- ... + potentially others mainly device/system variation specific
Design changes
- Navigation bar dimension changes require reboot
Download
https://github.com/GravityBox/GravityBox/releases/tag/v10.1.2_q
Module is also available in official Xposed Repository and LSPosed repository.
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Note that using Blacklist/Whitelist mode in EdXposed Manager may have side effects such as Zygote not
being able to access module preferences due to SELinux restrictions which results in relevant features not being enabled even if
they are enabled in module settings. This is EdXposed limitation/glitch
Commit history
Commit history for transition from 10.1.1 to 10.1.2
Just saw play store unlock key got updated, then see your post. Thanks for your great work!
Thanks..cant wait to try this once my phone gets android 10 support.
edison0354 said:
Just saw play store unlock key got updated, then see your post. Thanks for your great work!
Click to expand...
Click to collapse
Pardon my ignorance, but what's play store unlock key? Thanks
hallo dare said:
Pardon my ignorance, but what's play store unlock key? Thanks
Click to expand...
Click to collapse
He's talking about "GravityBox Unlocker".
Sent from my #FlagshipKiller6T using Tapatalk
Working pretty well right off the bat. Thanks! Gotta have my status bar brightness tweak!
OP7pro
Some tweaks are superfluous on OOS 10, but of course this mod isn't exclusive to OOS.
Haven't yet tested if enabling both stock and GB tweaks simultaneously causes hiccups
Humble request eventually. I've been trying out OOS gestures; it would be cool to add tweaks to those such as slide and hold back gesture for custom actions.
Great work!
C3C076 said:
Changelog 10.0.0-beta-1 - 28/09/2019
- Initial beta version for Android 10
Developed and tested on:
- OnePlus 7 Pro running OxygenOS
Current issues
- Power: Proximity wake up not working on OP7Pro (and maybe other devices) due to proximity sensor not reporting proper value until device is fully awaken
- Key actions: Home double-tap not working
- Key actions: Haptic-feedback on OxygenOS may feel a little delayed on keys that have actions defined; as it is performed on key release to avoid double vibrations
- Key actions: action to kill foreground app not working
- Lockscreen: Changed custom carrier text won't appear immediately
- Media: Expanded volume panel is not linked to stock expand button functionality of OxygenOS
- ... + potentially others mainly device/system variation specific
Design changes
- Navigation bar dimension changes require reboot
EdXposed related recommendations
- For OxygenOS, make sure to use version with a Bootloop fix from here: https://github.com/ElderDrivers/EdXposed/pull/354 (YAHFA version seems to be more stable)
- Keep Resource hooking support disabled in EdXposed Installer settings if possible, as EdXposed doesn't seem to be stable enough in that part
Download
https://github.com/GravityBox/GravityBox/releases/tag/v10.0.0-beta-1_q
Module will be available in Xposed Repository as soon as it is considered stable enough.
Required whitelisted packages
In case you use blacklist/whitelist functionality of EdXposed make sure all the following packages are whitelisted (not blacklisted respectively) for full GravityBox experience.
- Android System (android)
- System UI (com.android.systemui)
- Call Management (com.android.server.telecom)
- Download Manager (com.android.providers.downloads)
- Phone (com.android.dialer or com.google.android.dialer)
- Phone (com.android.incallui) (OxygenOS only)
Commit history
Full commit history for migration from Pie to Q
Click to expand...
Click to collapse
i just installed this and made a few mods on my status bar etc. do you happen to know if this cause battery drain?
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
LOS 17
Moto G3
Edxposed 4.5.5 sandhook
Gravity Box V10 beta-1
While ik custom rom support isn't guaranteed, LOS17 codebase at the moment is very close to AOSP and they've yet to add any navbar customization
Also the reason for me to set navbar heights to 0 instead of disabling the navbar outright is that the back gesture of Q relies on the navbar being enabled while the bottom swipe gestures don't need a navbar to work
Any possibility of a 4G/LTE toggle on Q. As well as a toggle for LTE+ as some carriers disable said icons in certain regions.
Sent from my Google Pixel 3a XL using XDA Labs
---------- Post added at 06:35 AM ---------- Previous post was at 06:06 AM ----------
DanGLES3 said:
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
Click to expand...
Click to collapse
Also, can confirm this happens on stock for me to.
Sent from my Google Pixel 3a XL using XDA Labs
buzzaldrine said:
i just installed this and made a few mods on my status bar etc. do you happen to know if this cause battery drain?
Click to expand...
Click to collapse
GravityBox is designed with care regarding battery consumption, so no, there shouldn't be any unexpected battery drain nor long-term wake locks.
DanGLES3 said:
If I set both navbar heights to 0 and reboot everything seems fine, until I go into landscape then back to portrait, the navbar comes back in portrait (it still remains hidden in landscape)
LOS 17
Moto G3
Edxposed 4.5.5 sandhook
Gravity Box V10 beta-1
While ik custom rom support isn't guaranteed, LOS17 codebase at the moment is very close to AOSP and they've yet to add any navbar customization
Also the reason for me to set navbar heights to 0 instead of disabling the navbar outright is that the back gesture of Q relies on the navbar being enabled while the bottom swipe gestures don't need a navbar to work
Click to expand...
Click to collapse
Skittles9823 said:
Any possibility of a 4G/LTE toggle on Q. As well as a toggle for LTE+ as some carriers disable said icons in certain regions.
Also, can confirm this happens on stock for me to.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
There was config_show4GForLTE in GravityBox / Advanced Tuning / SystemUI available in Pie but it's no longer there on Q so it seems like it was removed in Q.
Regarding navbar 0 dimensions. Hard to tell as I can't reproduce on OP7Pro.
This feature overrides framework config values so it is quite mystery to me that different values could be read from config after orientation change.
Resource config value replacement happens no matter what orientation, and always when config values are referenced.
Also, when your device has vertical navbar in ladnscape, you must set "Navigation bar width" to 0 instead of landscape height.
Edit: also try what kind of results you get when activating Expanded desktop using "Hide navigation bar" mode.
(Expanded desktop mode can be set in Display tweaks. Expanded desktop mode can be activated either from the power menu or using QS tile
Current Expanded desktop state is persisted across reboots).
Is that padding normal ?
and WiFi with Vibration Mode disappeared
C3C076 said:
There was config_show4GForLTE in GravityBox / Advanced Tuning / SystemUI available in Pie but it's no longer there on Q so it seems like it was removed in Q.
Click to expand...
Click to collapse
Well that's unfortunate. I'll have to speak to my carrier and see if I can get it changed, or something. I doubt they'll go through with it but it's worth a shot.
Sent from my Google Pixel 3a XL using XDA Labs
Systemless? I use GPay all the time and I want to try this out. Magisk hide works right now and idk if it will work with GB.
can't try this module as after installing riru and edxposed modules I get a bootloop
you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:
magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
magisk-riru-core-v19.5.zip
any clue? tia
FcukBloat said:
can't try this module as after installing riru and edxposed modules I get a bootloop
you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:
magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
magisk-riru-core-v19.5.zip
any clue? tia
Click to expand...
Click to collapse
Try switching to the Yahfa backend. I had the same issue as well initially but after switching all was fine. It seems to be far more stable compared to sandhook.
Sent from my Google Pixel 3a XL using XDA Labs
Skittles9823 said:
Try switching to the Yahfa backend. I had the same issue as well initially but after switching all was fine. It seems to be far more stable compared to sandhook.
Sent from my Google Pixel 3a XL using XDA Labs
Click to expand...
Click to collapse
thanks will try as soon as I hopefully fix the bootloop, didn't consider the YAHFA version because was reported to be for OOS. will see thanks again!
Hi,
Just installed Q version but at the same time that XPRIVACY which caught me in a bootloop...
Now it's fully working on my Pixel 3A running QP1A.190711.020.C3, EXKERNEL and XPOSED 4470 (last canary).
I'm also becoming a donator since I've used your plugin since my 1st android device running kit kat!
Thanks a lot!
Edit : Been using Sandhook version.
First bug : after enabling more steps to audio control, process android.media gets a lot of forced closed.
Wolfblade1215 said:
Systemless? I use GPay all the time and I want to try this out. Magisk hide works right now and idk if it will work with GB.
Click to expand...
Click to collapse
EdXposed passes SafetyNet and uses Magisk, so yes it is 'systemless'
FcukBloat said:
can't try this module as after installing riru and edxposed modules I get a bootloop
you know what I am doing wrong maybe? I am on pixel 3 with official Q, rooted with magisk canary latest version, and just installed the two apk's mentioned and the two modules below:
magisk-EdXposed-SandHook-v0.4.5.1_beta.4463.-release.zip
magisk-riru-core-v19.5.zip
any clue? tia
Click to expand...
Click to collapse
Because you didn't read much regarding EdXposed compatibility. The stable release of EdXposed is still not compatible with Q. You need to use the fix zips which are available under Pull Requests in GitHub page of EdXposed.
Sent from my #FlagshipKiller6T using Tapatalk
DarkSJ1998 said:
EdXposed passes SafetyNet and uses Magisk, so yes it is 'systemless' Because you didn't read much regarding EdXposed compatibility. The stable release of EdXposed is still not compatible with Q. You need to use the fix zips which are available under Pull Requests in GitHub page of EdXposed.
Click to expand...
Click to collapse
thanks. well i followed information and links in requirements section in OP... now i realize the yahfa version linked is the fixed one, the sandhook version links to the old non-fixed one