I ordered 2 of these for my wife's and my Galaxy S8. After applying them, I waited at least 12 hours before putting a case on my wife's phone. The edges peeled up almost immediately. I have 3 different cases, 2 Ringke and a leather wallet style. All 3 of them had the same issue, on both phones. I was looking at the reviews for this on Amazon and noticed the seller, New Tech Accessories, said that Armorsuit has released an updated version of this screen protector that has a more precise cut.
I know these protectors were very popular for the S7 Edge, so if anyone else is in the same boat, contact the seller through Amazon. Looks like they are going to exchange the defective ones.
stedean said:
I ordered 2 of these for my wife's and my Galaxy S8. After applying them, I waited at least 12 hours before putting a case on my wife's phone. The edges peeled up almost immediately. I have 3 different cases, 2 Ringke and a leather wallet style. All 3 of them had the same issue, on both phones. I was looking at the reviews for this on Amazon and noticed the seller, New Tech Accessories, said that Armorsuit has released an updated version of this screen protector that has a more precise cut.
I know these protectors were very popular for the S7 Edge, so if anyone else is in the same boat, contact the seller through Amazon. Looks like they are going to exchange the defective ones.
Click to expand...
Click to collapse
CASE UNFRIENDLY
Same thing happened with my S8. They didn't make the case friendly version as friendly as they should have. The version for my S7edge was great. These are cut too close to the edge of the screen.
stedean said:
I ordered 2 of these for my wife's and my Galaxy S8. After applying them, I waited at least 12 hours before putting a case on my wife's phone. The edges peeled up almost immediatelye
Click to expand...
Click to collapse
Oh no, I put an Armorsuit protector on my S8 last night. It's been on for over 12 hours but I haven't touched it yet. It looks really good on the phone. I have a Spigen ultra hybrid clear case. I hope I have better luck when I put the case on.
It shouldn't be an issue getting an exchange if you need it. Here is the reply to a user review on Amazon:
"Thank you for taking your time to leave us a feedback. We are sorry to hear that you were not satisfied with your purchase.
It is possible that you may have received a defective item. The manufacturer ArmorSuit recently released an updated version of the screen protector for the Galaxy S8 so there is a more precise cut that is replacing the first version. It is possible that you may have still received the first version.
If you wish to place a case over your device, we recommend you allow the screen protector to completely dry for 12-72 hours.
We are more than happy to assist you with a free replacement if you would like to give our product another try.
We will gladly assist you with this issue. Please contact us through Amazon's Contact Seller Link. We are unable to assist you more deeply by reviews. Please mention this review [OR use the 'Permalink' to link us to your review] and include your Order # in your message to us. We look forward to serving you."
stedean said:
I ordered 2 of these for my wife's and my Galaxy S8. After applying them, I waited at least 12 hours before putting a case on my wife's phone. The edges peeled up almost immediately. I have 3 different cases, 2 Ringke and a leather wallet style. All 3 of them had the same issue, on both phones. I was looking at the reviews for this on Amazon and noticed the seller, New Tech Accessories, said that Armorsuit has released an updated version of this screen protector that has a more precise cut.
I know these protectors were very popular for the S7 Edge, so if anyone else is in the same boat, contact the seller through Amazon. Looks like they are going to exchange the defective ones.
Click to expand...
Click to collapse
To my surprise I received 2 NEW improved design cut free of charge (only ordered one BTW) and didn't even ask the company for them! Getting my phone today so now I know why they sent them to me! You should be getting replacements too. If you haven't call or email them they stand behind their product!!
I have already sent them a message through Amazon.
I left mine on for 18 hours before trying with the case. It's buckled a tiny bit in the upper right corner and lower left corner. Other than that it's OK but very close to the case and I can see it possibly lifting on the edges with use. I assume I have one of the problem first batch. I'll contact them for a replacement either way just in case.
New Tech Accessories is sending me 2 new screen protectors. They did say if there were any more issues, I would have to do a warranty claim, which I don't think would be a problem. Also, they are just sending the protectors, so hopefully anyone else who is having an issue kept their squeegees and solution.
Same here. I have the zagg hd screen protector. My case came to days later and this is the result
Sent from my SM-G950F using XDA-Developers Legacy app
iteam said:
To my surprise I received 2 NEW improved design cut free of charge (only ordered one BTW) and didn't even ask the company for them! Getting my phone today so now I know why they sent them to me! You should be getting replacements too. If you haven't call or email them they stand behind their product!!
Click to expand...
Click to collapse
Are you going to be putting a case on your phone? Please let us know if the new designs work.
I got my new protectors. Not only did they send me replacements for the 2 that I ordered, but they sent me 4 extra. Haven't had a chance to try them yet, will do that tomorrow.
I can verify that the new protectors fit better. Tried multiple cases and no lifting at the edges.
After a couple of days the original Armorsuit protector started lifting up around the edges from contact with my Spigen Hybrid Ultra case. They sent me two of the revised more case friendly version without me even asking. I put it on 2 days ago and it is much improved. Fits my S8 with the Spigen perfectly. It looks great except for fingerprints. I just wish they come out with a glass protector that actually works and don't cost an arm and a leg. I really prefer that glass feel. Picture is attached but it doesn't do it justice because of reflections.
I bought an Armour Suit screen protector of Ebay and had no issues installing it. It fits great and the edges are not lifting. When installing, the edges did lift slightly, but I ended up using a hair dryer to let the edges stick. After applying the spray solution, when the skin adhesive drys a bit, it helps to adhere better. Also, my case doesn't cover up the edges as much as most popular cases which helps.
rudyo78427 said:
I bought an Armour Suit screen protector of Ebay and had no issues installing it. It fits great and the edges are not lifting.
Click to expand...
Click to collapse
You probably received the newer version. The first version was labeled as case friendly but wasn't. The newer one is actually case friendly and fits correctly. Armorsuit is sending out new protectors to those who received the non-case friendly ones.
New version working well with Spigen Rugged Armor. I recommend trying the case on during the install, while everything is still wet, to see if the corners are positioned properly. Also, don't "pull" to hard on the protector while squeegeeing it, since the material can stretch (and if it does, it will be too close to the edges and then will lift when a case is snapped on).
---------- Post added at 08:45 AM ---------- Previous post was at 08:43 AM ----------
Maybe OP should update thread title to reflect that the new version is "a go", especially considering Armorsuit sent everyone free replacements.
Not sure how to edit the title.
Related
I purchased a MIME tempered glass screen protector after trying others without success. First I had a Spigen nano glass tr which was nice. The Spigen didn't last long, my first 3 would lose the ability to adhere in certain areas after 1-3 weeks and my last one cracked without me dropping my phone. All of them were replaced by Amazon thankfully. I then tried the Extreme guard tempered glass which was so and I took it off after a day. I then did some research and decided that MIME would be the best because it only had the ear piece cut out as opposed to the huge ugly cut out that others have.
The MIME was by far the easiest installation I have come across. They include a anti dust sheet that is like a giant plastic screen protector that you user to get the dust off your screen before you place the glass on it. Then you just peel off the back and let the adhesive do the work. The quality is also unmatched in terms of the feel. There is no loss of touch sensitivity and the oleophobic coating doesn't wear off like my Spigen one did on my Note 3. It is also worth mentioning that the MIME has curved edges so it has a very nice feel and the curve prevents chipping for those of us who use the G3 naked.
After having my MIME for 7 weeks and surviving many small falls it finally broke. I was at school heading to my physics lab and my phone slipped out of my hand while opening a door. It fell down about 4ft and bounced onto some rocks off to the side of the building. I was worried that my phone was broken after that hard fall but thankfully only the MIME broke and there was no damage to my screen or phone at all. I was using a Cruzerlite TPU case which as most of you may know is very thin, yet it stands up to abuse very well.
Overall I'm very pleased with MIME and they even give you 40% off a replacement for any reason if it becomes defective or if you break it like I did. I'm ordering another one as soon as I get my code for the discount. Until then its back to the plastic one I had laying around my apartment.
When my replacement comes I will post an unboxing of the new one to complete this review. If anyone has questions feel free to let me know.
Here are the pictures of where it hit the rocks:
Great review.
I'm trying to decide which maker I get next.
I'm currently using a Spigen too and I have the same problem with the top corners losing adhesion. It looks awful.
Here is the one I am using. Its is sit on and has been on for going on 3 weeks now. I am very pleased with it..Good price and fit perfect even a case on the phone. Its the ICarez brand of Amazon..
Http://amzn.com/B00KGSW734
Sent from my LG-V410 using XDA Free mobile app
esimon311 said:
Here is the one I am using. Its is sit on and has been on for going on 3 weeks now. I am very pleased with it..Good price and fit perfect even a case on the phone. Its the ICarez brand of Amazon..
Http://amzn.com/B00KGSW734
Sent from my LG-V410 using XDA Free mobile app
Click to expand...
Click to collapse
I actually ordered one as a backup for until my MIME gets here. I hate using my phone without the tempered glass because the feel isn't the same and neither is the protection. The MIME is still three best tempered glass that I have tired over the past year or two with the 6-7 brands that I have used. I highly recommend it plus it doesn't suffer from the adhesion issue that others have.
Edit
also the two impact marks on the glass were fairly deep but MIME did a great job with their silicon barrier preventing any puncture or damage to my screen.
In the german Forum Android Hilfe is a posting of one user who´s G3 crashed on the floor, the Glas-Protection-shield without any damage but beneath the impact shattered the Display and the touchscreen modul.
Not even a scratch on the Hardglass Protector
Strange.....
I have a dbrand in order. It's gorilla glass 3 and .2mm thick. I am extremely careful with my electronics. I have never dropped my phone.
cynikalJ said:
I have a dbrand in order. It's gorilla glass 3 and .2mm thick. I am extremely careful with my electronics. I have never dropped my phone.
Click to expand...
Click to collapse
I am very carefully with mine as well, but unfortunately things happen when you are in a rush. I dropped my Note 3 with a Spigen glass tr and neo hybrid case from 7 feet and it was perfectly fine. I think it just depends on how it impacts the ground. Post some pictures of the dbrand glass, I'm curious to see how the cutout is on the top.
Its been 3 days and no response from MIME... Their website says they are having issues with their contact system. Does anyone know of another tempered glass that only had the speaker cutout and isn't Spigen or MIME? I'm anxious to get my tempered glass back and I currently have an icarez as a temporary replacement until I can find a better one.
Pilz said:
Its been 3 days and no response from MIME... Their website says they are having issues with their contact system. Does anyone know of another tempered glass that only had the speaker cutout and isn't Spigen or MIME? I'm anxious to get my tempered glass back and I currently have an icarez as a temporary replacement until I can find a better one.
Click to expand...
Click to collapse
I currently have an icarez on. How do you think it compares to the MIME?
jbradt said:
I currently have an icarez on. How do you think it compares to the MIME?
Click to expand...
Click to collapse
It feels about the same, but mine keeps getting a tiny bubble off to the side which is annoying. I installed it perfectly with 0 bubbles/dirt and it keeps getting this rainbow bubble. So the quality isn't as good because it shouldn't keep popping up, also the cutout is not something that I am a fan of. If it keeps popping up I am going to send it back, but other that that, and the cutout its fairly nice. The fit isn't as close to the edge as the MIME so the gap bothers me since I'm OCD about how things fit on phones. (you can thank the years of going to school for engineering for that) I think that if I had a better cutout on the top (i.e. only for the speaker ) I would keep it as a permanent solution if it stays adhered to my screen.
Update MIME got back to me and sent me the 40% off a replacement. It should be here by Friday so I'll post a updated review with the unboxing and installation around then.
If I buy the MIME Tempered glass from a reseller (i.e. amazon) and not directly from MIME website, will I be able to receive the 40% off replacement ?
tweetious said:
If I buy the MIME Tempered glass from a reseller (i.e. amazon) and not directly from MIME website, will I be able to receive the 40% off replacement ?
Click to expand...
Click to collapse
Amazon doesn't sell them as far as I know. I believe they are only sold directly from MIME but you would have to email them to find out.
Good luck with Mime I tried both there ghost and there regular on my nexus 5 , both failed within a month , I talked a good friend into buying one also at the same time , his failed also , chips on the corners , on each one , and I'm not talking about dropping it either , at first I thought it's my fault for trying something new at that time there Ghost had just come out , so after three times I'm sorry folks in world that means your OUT, yeah big deal they will keep selling them to you at I forget 60 % off or 40 % doesn't matter if the product keeps failing time after time every time , I've had an Iloome on my Note 3 for almost a year now still perfect as the day I put it on , and I bought an icarez for my G3 a couple mnths ago still perfect also , maybe it was just my bad luck , and my friends also , but if I had a choice I would buy Either an Icarez or an Iloome , I'm sure spigen's are great but at 3 times the price there are better options.......................Peace
if I use the Tempered glass with the Original LG G3 Quick Circle Case, am I going to have any problem to keep the flap in place (attached on screen, not slightly raised) due to the slight thickness that the glass adds?
tweetious said:
if I use the Tempered glass with the Original LG G3 Quick Circle Case, am I going to have any problem to keep the flap in place (attached on screen, not slightly raised) due to the slight thickness that the glass adds?
Click to expand...
Click to collapse
My quick circle never liked to stay shut even without a glass screen protector. Spigen makes a magnet clip to keep it closed if you're worried about that.
So like me i am sure you all went thru a lot of glass and plastic screen protectors for your galaxy S7 and nothing fits right or feels same.
Here is a new one by CORAL
https://www.youtube.com/watch?v=qL-9u0dnzuk
Here is a video review by our own ebpman
https://www.youtube.com/watch?v=Q6Fzelt0l9s.
Mod edit: Commercial links removed.
Hopefully i was able to help you all out!
EDIT UPDATE:
Review for the Coral Tempered Glass
#1 Looks 8/10- It dosent look exactly like the phone, so its like putting a case for the front as well. However dont get me wrong it does look very good so i will give it an 8 since it does not preserve the samsung color all the way but it comes very close.
#2 Design: Idk how i can rate this one. It is shaped just like the phone screen so thumbs up i guess.
#3 Functionality: Flawless touch screen experience. This field will get 10/10
#4 Compatibility: Already tried it with other cases, about 5 of them (i work at Verizon) and it works well with all of them. I can see it being a problem with some off brand super tight cases though. I tested it with UAG, Incipio, Speck, Spigen, Case Mate.
#5 Protection: It makes my phone feel very secure and is a solid over all product. so this is one place it gets 10/10 for sure. It is 0.26 MM which is thinner than 0.33 MM regular glass we are used to but if the glass was any thicker i dont think the cases would fit it, so i do believe its the perfect thickness.
Overall its a 9 depending on how it does with my cases but i am sure it ill pass with flying colors.
Will do a more in depth review once i get back home from work tonight or tomm. Will post pictures
I am using it with an otter-box commuter right now and its working great. Also idk how many of you saw this but here is the video of our very own ebpman who did a review on one as well. https://www.youtube.com/watch?v=Q6Fzelt0l9s
Another review by @seoulbrova https://www.youtube.com/watch?v=70dP...ature=youtu.be
P.S: I have more cases coming in oblique and caseology and all so ill post how those work with this here.
These companies should probably have options where the samsung logo gets hidden.
peachpuff said:
These companies should probably have options where the samsung logo gets hidden.
Click to expand...
Click to collapse
would you really like that?? i kind prefer mine as if there is nothing on the screen to preserve the orignal look. But then i am also the person whos like BEFORE and is against the after
Ordered one, hope it's as nice as it looks.
Are there any distributors of Coral products in Canada? The shipping costs bring this to about $60 CDN, which seems a bit high for me. Also, is Coral associated with Leaf (perhaps owned by them)?
I wanted to order this, but even with the $5 off coupon, it adds up to $30+. They charge $4.50 for first class mail shipping, which is ridiculous. $32 for a screen protector is a bit rich.
Sir_Eagle said:
Ordered one, hope it's as nice as it looks.
Click to expand...
Click to collapse
Please let us know how it fits! It seems like all the manufacturers are having problems with those curved edges with not only tempered glass, but also PET. Those slightly curved edges are making it difficult to find any screen protector that is full screen and doesn't have edge lifting or issues with cases. This is the first company with a full screen tempered glass protector that actually has a video of it on the s7 and addresses those issues. Still, it will be good to hear from someone that has tested it first hand that isn't paid by the company.
xxaarraa said:
I wanted to order this, but even with the $5 off coupon, it adds up to $30+. They charge $4.50 for first class mail shipping, which is ridiculous. $32 for a screen protector is a bit rich.
Click to expand...
Click to collapse
Is it ? everytime i ship something using first class mail it always ends up being over $5 honestly i cant comment on the weight as idk if i have ever shipped anything which weighs like a tempered glass but oh well i wont complain if it works properly, otherwise back it goes lol.
Whats with colored screen protectors this time around?
Are they trying to hide the rainbow effect?
I can confirm that this tempered glass protector would fit as advertised because i bought the plastic ones and they fit perfectly. Heres the link. I purchased one and should arrive in a week. http://www.ebay.com.au/itm/17175543...49&var=470968620531&ssPageName=STRK:MEBIDX:IT
Just bought the gold, will update on how it looks.
Leeum said:
I can confirm that this tempered glass protector would fit as advertised because i bought the plastic ones and they fit perfectly. Heres the link. I purchased one and should arrive in a week.
Click to expand...
Click to collapse
Interesting, is that a knockoff Zagg? Not that the brand matters. As long as it fits, protects the screen and doesn't interfere with the touch sensititivy, I don't care about the brand. Maybe mfg finally figured out how to make these for the curved glass. However, the title states for Samsung Galaxy S6 S7 and I've seen plenty on Amazon that state full coverage for Galaxy S7. Then based on reviews, it seems they just rebranded an S6 protector. It does state beneath the title, [tested on Galaxy S7], and also gives the option to select S6 or S7. I hope it fits! If so, it means that there will be a lot more of these available and prices will come down. If you bought the PET one, did you notice any edge lifting?
@ -Gir-, in the video it actually shows the rainbow effect, so no, I don't think that's it. Maybe it helps with aligning it? I don't know, and it does seem sort of unnecessary. The one in the ebay link also has colored borders.
Dam, no getting these in the UK? I checked the site and they only ship to the states.
poopooplatter said:
Interesting, is that a knockoff Zagg? Not that the brand matters. As long as it fits, protects the screen and doesn't interfere with the touch sensititivy, I don't care about the brand. Maybe mfg finally figured out how to make these for the curved glass. However, the title states for Samsung Galaxy S6 S7 and I've seen plenty on Amazon that state full coverage for Galaxy S7. Then based on reviews, it seems they just rebranded an S6 protector. It does state beneath the title, [tested on Galaxy S7], and also gives the option to select S6 or S7. I hope it fits! If so, it means that there will be a lot more of these available and prices will come down. If you bought the PET one, did you notice any edge lifting?
@ -Gir-, in the video it actually shows the rainbow effect, so no, I don't think that's it. Maybe it helps with aligning it? I don't know, and it does seem sort of unnecessary. The one in the ebay link also has colored borders.
Click to expand...
Click to collapse
I am waiting on the glass one to arrive. I bought a 3 pack of the plastic ones and stuffed one of them up but second one fit on perfectly. Using a Spigen case and no screen lifting. Touch sensitivity is smooth as it is off. No problems at all
I got my onyx s7 yesterday, 1st day out of the house. Rocking a spigen case (need to change the case, rear is clear plastic and very slippy) add to that the screen is naked, im scare of breaking it.
Ive akways had tempered glass on my s5 and had no issues. ordered the crystal spigen but desperate for a tempered glass one in the uk
will wait for a price drop, they sell other items on amazon for much less. obviously this will be higher than most but hoping a small drop will happen soon
keep us posted on field tests
Leeum said:
I can confirm that this tempered glass protector would fit as advertised because i bought the plastic ones and they fit perfectly. Heres the link. I purchased one and should arrive in a week. http://www.ebay.com.au/itm/17175543...49&var=470968620531&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Looks like that one only ships in Australia, which is shame for me here in Canada. The price seems much better than the one from Coral, but maybe there is a quality difference. If I was in Oz I would likely order this one and try it out. The price of the Coral one is too high for me to order it right now.
Obsidian Octagon said:
Looks like that one only ships in Australia, which is shame for me here in Canada. The price seems much better than the one from Coral, but maybe there is a quality difference. If I was in Oz I would likely order this one and try it out. The price of the Coral one is too high for me to order it right now.
Click to expand...
Click to collapse
Yeah there is this one also. http://www.ebay.com.au/itm/18180932...49&var=483012366865&ssPageName=STRK:MEBIDX:IT
Leeum said:
Yeah there is this one also. http://www.ebay.com.au/itm/18180932...49&var=483012366865&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Thanks, but looks like that one also only ships within Oz. I decided to order this one: https://www.amazon.ca/Galaxy-Protec...458707412&sr=8-8&keywords=screen+protector+s7
I'll report back once I get it and (try to) install it.
Obsidian Octagon said:
Thanks, but looks like that one also only ships within Oz. I decided to order this one:
I'll report back once I get it and (try to) install it.
Click to expand...
Click to collapse
Hope that Jetech works for you! Just checked again on Amazon and it looks like there are quite a few options now with the same description as the Coral one; namely 9H hardness, oleophobic coated and full coverage (Sorry, can't add urls, newbie poster, long time browser). Also, all seem to have the colored borders. Prices seem to range from about $8.99-$29.99 (Checked Amazon UK and there seems to be a few on there too!). I have noticed that like the Jetech, most of these state the thickness is 0.3 mm, which one reviewer stated made pressing the home button difficult for his fat fingers. Curious to know if anybody else has had that issue before. It seems this is a common thickness for the tempered glass. My last one had a gap under the home button so it wasn't an issue.
@ Leeum, thanks for the update on the fit of the plastic ones. Good to know you didn't have issues with edge lift with the Spigen case.
@ StickyGeko, I had the same case and almost dropped it first day! Immediately ordered another case and only kept that one on there long enough for the new one to arrive. Ended up going with the Spigen Slim Armor. Still a bit smooth for my liking, but it seems to have just a bit more padding.
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
What 3d glass screen have everyone ordered? Please share on this thread, my screens should be coming soon!!
I'm not a fan of glass screen protectors on a curved screen. There is always to much glare.
Sent from my SM-G925P using XDA-Developers Legacy app
I haven't bought one yet, but I'll be getting most of my info from this YouTube channel. This guy does quality reviews.
For example, see this video about the Olixar glass screen protector:
https://youtu.be/o2R1YEX4yrw
He's already stated that he'll be reviewing several glass screen protectors for the S8+, and I think most of the information should apply to the S8 as well.
i bought the olixar one only, says case compatible. Lets see when it comes if it fits with the spigen thin armor.
https://in.mobilefun.com/63316-olix...e-compatible-glass-screen-protector-black.htm
Just posted this on the Plus forum - thought I'd share here too. Looks like it might be good. https://www.youtube.com/watch?v=QvdxxTUu1ac
Where is the plus forum? Lol
Th3PorTuGa said:
Where is the plus forum? Lol
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8+
Thanks
Dr. Fed said:
I haven't bought one yet, but I'll be getting most of my info from this YouTube channel. This guy does quality reviews.
For example, see this video about the Olixar glass screen protector:
https://youtu.be/o2R1YEX4yrw
He's already stated that he'll be reviewing several glass screen protectors for the S8+, and I think most of the information should apply to the S8 as well.
Click to expand...
Click to collapse
Sucks that the Amazon link he posted, the item's unavailable. Hopefully it'll come back in stock. Curious about other glass protectors and if they're case-friendly. This one does look promising though.
waynerbbx said:
Just posted this on the Plus forum - thought I'd share here too. Looks like it might be good. https://www.youtube.com/watch?v=QvdxxTUu1ac
Click to expand...
Click to collapse
Another one to look at as well. I actually am currently using one of their glass screen protectors for my S6. Haven't had any issues with it, so also good to know.
Anyone try the Zagg yet? It supposed to have full screen adhesive, hoping to see some user reports though since its $50.
Don't do it!
nagle3092 said:
Anyone try the Zagg yet? It supposed to have full screen adhesive, hoping to see some user reports though since its $50.
Click to expand...
Click to collapse
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
eddieloera said:
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
Click to expand...
Click to collapse
:good:
Zagg isn't even special. they just came around the market early with heavy marketing tactics. Uses the "it cost more , must be better gimmick."
eddieloera said:
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
Click to expand...
Click to collapse
Thanks, looks like I will just go with a plastic protector. I've got a glass one on now but the touch sensitivity is pretty ****ty.
Not a great cover
eddieloera said:
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
Click to expand...
Click to collapse
I'm in the same boat with this screen protector. I put it on last night. I appreciated the little frame to help you guide it, but the screen response is crap. There is one section that I have to forcibly push down for it to register. There are some parts that lift and you can hear the plastic coming down to make contact with the screen when being touched. Not the best fit, and for $50 it better be perfect. Calling Best Buy after work to see about a return / refund. There was a $24.99 one there that I'll try next, but it didn't curve.
Just returned mine.
senor360 said:
I'm in the same boat with this screen protector. I put it on last night. I appreciated the little frame to help you guide it, but the screen response is crap. There is one section that I have to forcibly push down for it to register. There are some parts that lift and you can hear the plastic coming down to make contact with the screen when being touched. Not the best fit, and for $50 it better be perfect. Calling Best Buy after work to see about a return / refund. There was a $24.99 one there that I'll try next, but it didn't curve.
Click to expand...
Click to collapse
I just got back from Best Buy like 2 hours ago. I returned it and they asked no questions. I did, however, keep the screen on until I got there because I wanted to explain that I was afraid of breaking the screen protector upon removal. They said it was fine and to go ahead an remove it. It came off pretty easily, which made me wonder how long it would have stayed on if I would have decided to keep it. I got my $50 back and I instead bought the $24.99 I think you're talking about. Also made by Zagg called "HD Clear." Its a floppy plastic one and a lot harder to put on correctly but this is the one I had on my S6 and I loved it. Currently I have my S8 curing so the small bubbles can evaporate.
I'm wondering if after I return my Zagg I should just make a drive to the mall and visit the Ghost Armor kiosk and pay to have them put it on? Their website shows a 'case friendly' one costs $29.99 for the screen alone. Not sure how much the person putting it on would charge above that, but I've at least used them before and they also have a guarantee.
I had a tempered glass protector on my S6 that was great, but it had a flat screen so no issues. I tried 2 different tempered glass on my S7 Edge. Neither were any good so I went with a plastic shield that was OK but it's not the same as glass. I just put a Armorsuit plastic screen protector on my S8. It looks better than the one I had on my S7 Edge. If you go on Amazon and check out the reviews on the glass protectors, you see almost all bad reviews. The good reviews are probably mostly fake. I'm going to wait and see if someone finally makes a glass screen protector that actually works properly on curved screens.
I ordered the Philonext on Amazon, arriving tomorrow. I will post later on how it is.
The problem with the 3D curved tempered glass is that the adhesive they use is not like the flat glass versions. Not sure why no one can do this. If you look at all full coverage glass (had one for the LG V20, same issue) the adhesive is only on the outer most edges. Since the adhesive is like .02mm or so, the rest of the screen doesn't sit flat against the display. So this causes the user to use a bit more force to press down on the glass cover. Until someone can fully coat the glass with adhesive as the fully flat glass does, then all will suck. I bought the Verizon Full coverage glass and it's the same...bad touch sensitivity!
I've been using a heavy duty case with built-in screen protector on my phones for the last few years. Because of the nature of my work having the screen protector built into the case is important, I only use the case at work and I hate using stick on screen protectors on my phones since they're not needed for normal use. I've been trying to find a heavy duty case with built-in screen protector for the S8+ but they all come without the screen protector, I'd guess it's because of the curved screen. Does anyone know if there will eventually be versions that come with the screen protector? Or if there are some cases with the screen protector that I haven't found yet?
SubyWill said:
I've been using a heavy duty case with built-in screen protector on my phones for the last few years. Because of the nature of my work having the screen protector built into the case is important, I only use the case at work and I hate using stick on screen protectors on my phones since they're not needed for normal use. I've been trying to find a heavy duty case with built-in screen protector for the S8+ but they all come without the screen protector, I'd guess it's because of the curved screen. Does anyone know if there will eventually be versions that come with the screen protector? Or if there are some cases with the screen protector that I haven't found yet?
Click to expand...
Click to collapse
Lifeproof has their case and it's waterproof, but expensive @ $80! Also, you can look at the Love Mei cases and can buy them from ebay or amazon. :good:
http://www.lovemeicase.com/index.php?route=product/category&path=87_207
I have good experiences with love mei powerful and otterbox defender cases on past phones.
the otterbox defender is a plastic hard case with an additional silicone case wrapped around it, and an integrated plastic screen protector.
the otterbox usually also comes with a clip that can be used as a holster or kickstand.
the love mei powerful is basicly a DIY kit for making your phone an "active" model.
it's a metal case with a silicone bumper sandwiched between the front and back plates, held together by screws.
the screen protector is glass glued to the front metal plate, and all holes are covered or sealed to offer basic splash and dust resistance.
if you're looking for a case you only use for work and take off at home i'd recommend the otterbox, it's the easiest to take off.
Otterbox Defender doesnt have a built in screen protector!!! Per Otterbox website
jpinks said:
Otterbox Defender doesnt have a built in screen protector!!! Per Otterbox website
Click to expand...
Click to collapse
Can confirm it does. I have it, it definitely feels like a sturdy commuter or a unicorn bettle case
No it doesn't. I have one too.
thedicemaster said:
the otterbox defender is a plastic hard case with an additional silicone case wrapped around it, and an integrated plastic screen protector.
the otterbox usually also comes with a clip that can be used as a holster or kickstand.
if you're looking for a case you only use for work and take off at home i'd recommend the otterbox, it's the easiest to take off.
Click to expand...
Click to collapse
I have the otterbox defender for the S8 (not the +). I can confirm that the otterboxes for both the S8 and S8+ DO NOT have built in screen protectors. While every previous versions of these cases did, and they gave no indication prior to the release date of the phone that they wouldn't (including on their website when they started shipping them, I preordered mine when I ordered my S8), the new version "is screenless to allow full use of the curved screen", and otterbox tells you to buy one of their alpha glass screen protectors at $50/pop if you want a screen protector.
If you check Otterbox's website you'll see the myriad of 1-star reviews for their S8 cases over this issue, as they basically bait-and-switched everyone who preordered the Defender, and are now saying "Give us more money to have your screen protected."
I'd steer clear of the Otterbox for that reason. If you don't need the holster, the Lifeproof is probably your best way to go. If you do need the holster... Well then, I don't know what to tell you. Perhaps an Otterbox with an added screen protector, though the ones I've tried don't fit well. Or get the Lifeproof and add a belt clip to it. The one Lifeproof sells has some mixed reviews, but you can probably aftermarket add one that would work, or just use an old fashioned holster-type slip case.
Anyone can recommend me any cases for the S8, with a built in screen protector? All the ones you mentioned here are not released yet. Plus I've done research before the S8 released, and the day the S8 released, and I was unable to find any cases with a built in screen protector, that wss already released. All the info I can get is greatly appreciated!
SubyWill said:
I've been using a heavy duty case with built-in screen protector on my phones for the last few years. Because of the nature of my work having the screen protector built into the case is important, I only use the case at work and I hate using stick on screen protectors on my phones since they're not needed for normal use. I've been trying to find a heavy duty case with built-in screen protector for the S8+ but they all come without the screen protector, I'd guess it's because of the curved screen. Does anyone know if there will eventually be versions that come with the screen protector? Or if there are some cases with the screen protector that I haven't found yet?
Click to expand...
Click to collapse
I just came across Punkcases this morning. They have a few different versions of cases. One of them has a built in screen protector, and is certified water, snow and dustproof, and also military grade. I just purchased mine this morning a few minutes ago. I thought I would share here, since you're also in need of a case with the built in screen protector.
The reviews on their website, for this specific case, seems to be very good. I have yet to try one out myself though. But as soon as I receive mine I will let you know how it is. I chose expedited shipping when I ordered this morning. By the way, I already broke my S8 while in an OtterBox Defender case, and had to get a replacement from insurance(arriving today). But to me, OtterBox cases are complete BS, and the case broke in one day. Not to mention, after the S8 and the OtterBox case both broke. My dog got a hold of the OtterBox case and was able to rip off the side bumpers, and rip the case in half, in literally seconds. That's how bad, and crappy Otterbox cases are, that they're able to rip in seconds! It's supposed to be very durable and resist a lot! I honestly thought it would be tough as nails, and resist a dog messing and biting with it for awhile before it got damaged! Not seconds!
But I leave you with a link here on the bottom, directly to the case I purchased. which has a built in screen protector.
https://www.punkcase.com/products/g...irtproof-snowproof-case-1?variant=33285829377
My S7 edge just got bricked last week and so, having nothing to lose, I thought I'd test the case. It's an Otterbox. I'm not sure of the name but it's fairly thin looking. I was honestly expecting poor results but throwing it about 2m high and 3m forward onto cement left it without a scratch. I did it about 7 or 8 times.
Sent from my SM-G955F using Tapatalk
bigj0110 said:
I just came across Punkcases this morning. They have a few different versions of cases. One of them has a built in screen protector, and is certified water, snow and dustproof, and also military grade. I just purchased mine this morning a few minutes ago. I thought I would share here, since you're also in need of a case with the built in screen protector.
The reviews on their website, for this specific case, seems to be very good. I have yet to try one out myself though. But as soon as I receive mine I will let you know how it is. I chose expedited shipping when I ordered this morning. By the way, I already broke my S8 while in an OtterBox Defender case, and had to get a replacement from insurance(arriving today). But to me, OtterBox cases are complete BS, and the case broke in one day. Not to mention, after the S8 and the OtterBox case both broke. My dog got a hold of the OtterBox case and was able to rip off the side bumpers, and rip the case in half, in literally seconds. That's how bad, and crappy Otterbox cases are, that they're able to rip in seconds! It's supposed to be very durable and resist a lot! I honestly thought it would be tough as nails, and resist a dog messing and biting with it for awhile before it got damaged! Not seconds!
But I leave you with a link here on the bottom, directly to the case I purchased. which has a built in screen protector.
https://www.punkcase.com/products/g...irtproof-snowproof-case-1?variant=33285829377
Click to expand...
Click to collapse
Dogs you receive this case yet? Any idea when it's going to be released?
bigj0110 said:
But I leave you with a link here on the bottom, directly to the case I purchased. which has a built in screen protector.
https://www.punkcase.com/products/g...irtproof-snowproof-case-1?variant=33285829377
Click to expand...
Click to collapse
Looks interesting but I can't see on the website how you install it. It also looks like you would have to disassemble it whenever you need to change the SIM or MicroSD. I travel abroad every month or two and have to change my SIM every time.
When you have it, can you also check if it is wireless charging friendly?
GCbard said:
Dogs you receive this case yet? Any idea when it's going to be released?
Click to expand...
Click to collapse
I'm waiting for it to arrive to me. But it is already released. It should be here any business day now.
Otterbox Defender with Screen Protector Available in the UK?
This is my first time here... I found this thread because I too, am searching for the best of the best case for my Galaxy S8.
I was sitting on a flight from the UK to New York 3rd week of June 2017, next to a woman who had an Otterbox Defender for her Galaxy S8 and it had a Otterbox OEM built in screen protector. The quality of the plastic appeared to look and feel like the same plastic they have always used in the defender model.
I had previously read the threads from various sites on this case because I have always used the defender since my galaxy S about 7 phones ago and was going to upgrade my S7 to the S8 soon. I was actually searching for case info while on the flight. Anyway, I had read that the new Defender for the S8 came without screen protection.
I had a discussion with her and she told me that bought the case at a street shop in Glassgow that sold many things other than phones so it was not a dedicated phone store. I howevr, have not been able to locate one even on international websites. There is no mention of this on Otterbox's website and I neglected to ask her how long ago she bought it.
Could it be that this is another "Not In America" thing? Any light anyone can shed on this would be helpful! I received my S8 yesterday but have not yet ordered a case for it.
I got the Punkcase waterproof (Studstar) for my S8. Firstly, I just wanted to mention the customer service I received from Punkcase - it was pretty bad. I ordered the case, two weeks later still hadn't received anything, and no updates. So I found another waterproof case that looked pretty similar on eBay, ordered that and asked to cancel the Punkcase. They sent me a message saying the case was very popular and backordered, and thanks for your patience, but they didn't cancel it. Almost two weeks later still no case, and no word, so I emailed them again and told them to cancel my order (again), since it hadn't been shipped and was almost a month since my order. They immediately (within an hour) sent me a tracking number saying it had been shipped, but no apologies or communication, and no cancellation. However, the tracking number was just that, a number - it hadn't been shipped at all, and wouldn't be for another week. They just created a tracking number to prevent me from being able to cancel the order. Pretty dishonest.
I finally received the case, and really it's just ok. It feels cheaper than the $40 I paid, and certainly if I'd paid the regular price of $80 I would have been pissed.The one I got off ebay for $15 was about the same quality. It is definitely water proof, and has the screen protector, but there is a bit of a gap between the cheap plastic protector and the screen, the case adds enormous width and I feel like a face down drop would absolutely not protect the screen enough to prevent a shattered screen. I'm going to use it for a while, but keep looking guys, the Punkcase is not the one.
Ghostek Cases?
Does anybody here have any experience with Ghosttek Cases?
More specifically this one: http://www.ghostekproducts.com/phon...f-protective-case-cover-ghostek-nautical.html ?
I have the pelican voyager for the s8 plus and it comes with a removable built in screen protector and a belt clip.. some of the reviews weren't great but I took a chance on it and liked it just fine
I had the nautical. Its a good case for 40 dollars.
I now have the lifeproof fre and ill say from having both the fre is definitly worth the money.
I didnt even want to test the nautical under water....the lifeproof works great under water.
The nautical is bulky
The lifeproof is slim... about perfect... only downside is the screen protector has a very small rise off the screen... not a deal breaker tho.
Hope this helps
S8 Clayco Hera Series https://www.amazon.com/gp/product/B06XJ3L7FL/
I don't think I have seen this case mentioned, but it seems to be a good middle ground between something like a life proof and one of the cases more meant for further waterproofing. The reviews on the S8 version really bash it for the screen protector losing a lot of touch sensitivity, but in my experience it isn't that much- just the occasional key stroke. Meanwhile the S8 Plus version is well reviewed. Overall I like it and use it, although not all the time only when I am doing something where I really need the protection such as hiking or going to the bar and having a few.
Edit: Looks like the one I bought is out of stock and they are coming out with an updated one: https://www.amazon.com/Clayco-Updated-Version-Full-body-Protector/dp/B073TRVKKK/
mrspock08 said:
I have the otterbox defender for the S8 (not the +). I can confirm that the otterboxes for both the S8 and S8+ DO NOT have built in screen protectors. While every previous versions of these cases did, and they gave no indication prior to the release date of the phone that they wouldn't (including on their website when they started shipping them, I preordered mine when I ordered my S8), the new version "is screenless to allow full use of the curved screen", and otterbox tells you to buy one of their alpha glass screen protectors at $50/pop if you want a screen protector.
If you check Otterbox's website you'll see the myriad of 1-star reviews for their S8 cases over this issue, as they basically bait-and-switched everyone who preordered the Defender, and are now saying "Give us more money to have your screen protected."
I'd steer clear of the Otterbox for that reason. If you don't need the holster, the Lifeproof is probably your best way to go. If you do need the holster... Well then, I don't know what to tell you. Perhaps an Otterbox with an added screen protector, though the ones I've tried don't fit well. Or get the Lifeproof and add a belt clip to it. The one Lifeproof sells has some mixed reviews, but you can probably aftermarket add one that would work, or just use an old fashioned holster-type slip case.
Click to expand...
Click to collapse
I disagree. Life proof sux. There is like a 1mm strip of foam in the middle of the case and that is the extent of drop protection. I have both defender with alpha glass and lifeproof. Lifeproof feels like a trinket from a quarter machine at the grocery store compared to defender. I have gone through 5 or 6 alpha glass protectors and the new ones are better but still not a perfect fit. Call the warranty line for whichever case u want and u can get it for like $5. Both of these cases have lifetime replacement warranties.