According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state, downgrade from 7.0 or unroot. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
This downgrade process supports full OTA Upgrade.
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Phone : In Developer Options >
>Turn on USB debugging
>Enable Oem Unlock
1. Uninstalling Root
We must uninstall root (supersu) on the device. Select supersu app and tap the settings.
Access > Default Access > Grant and Full Unroot > Continue > Yes > Yes
The phone is restarting now. Check the supersu app not in drawer.
Shutdown the phone.
2. Turn Phone To Download Mode.
Hold down together the Volume Up + Power button for a while. Release power key after lenovo logo shows up. On the menu select download. Download Mode dont have any screen. Screen is blank but working.)
Connect phone to PC
3. Flashing Rom
Unrar 5_K53_S123_170216_ROW_STOCK.rar (Latest) or 5_K53_S116_161115_ROW_STOCK.rar (Testing OTA)
Unrar 4_QcomDLoader.rar Open folder. Click and open QcomDloader.exe
On Downloder Window Click load button. (First on top left)
Select the directory of the rom files (The directory numbered 5 which contains many img files) Click OK.
Click settings button. (Second on top left)
Dont change anything. I was pre entered the options. Check the values. If wrong, correct.
Manifacture Order: EMPTY (Important)
Download Mode: UPGRADE
Chipset: 8937
Downloaded Rom: CHECKED
eMMC Programmer: prog_emmc_firehose_8937_ddr.mbn
Raw Program: rawprogram0.xml
patch0: patch0.xml
Click OK.
Click Start button. (Third on top left)
Status becomes Downloading. Wait for a while. Flashing finishes around 400-500 seconds.
Status becomes Finish. Progress Passed.
Disconnect the phone. Close the Downloader on PC.
Press Power button 10 seconds on phone. Device is restarting.
Wait a few minutes. Phone will be opened to first install mode . In language selection screen Shutdown the phone by pressing power button.
4. Installing ADB
Install 1_adb-setup-1.3.exe to the pc. (Select > Yes > Yes > Yes > Yes. In the opened window click Install)
5. Locking the Bootloader.
Restart phone in fastboot mode. (Hold down power + Volume DOWN keys. Fastboot Mode appairs left top of the screen.)
Connect phone to PC
Adb directory now located in C Drive. Open adb folder. Open a command window here. (CRTL+SHIFT right click on empty space. Select Open Command Prompt Here)
Type: fastboot devices then press enter. (Your device must be listing like: s356d3a9 fastboot)
Type: fastboot oem lock (OKAY [ 0.031s] finished. total time: 0.031s)
Type: fastboot oem device-info
Control all options are false.
Disconnect the phone. Restart phone by pressing power button 10 seconds.
Finished...
This rom contains no bloatware except Lenovo Help (a.k.a Lenovo Companion)
Changing The Phone Region (Optional)
Open Dialer > Type ####682# > Chose Your Region > Restart
Check Region > Type ####5993# > Last 2 chars are your region.
Changing the region gives you to access phone software's drive when connect it to PC
OFFICIAL ROM LINKS: (Lenovo Ota Server)
Update ROM S116-161115 to S123-170216
http://phonedl.ota.lenovomm.com/dls/v6/K53_S116_161115_ROW_TO_K53_S123_170216_ROW_WC2178D800.zip
Update ROM S123-170216 to S218-170605 (Official Android 7.0)
http://phonedl.ota.lenovomm.com/dls/v6/K53_S123_170216_ROW_TO_K53_S218_170605_ROW_WC48DE0BA5.zip
Changelog
Added Lenovo Vibe K6 Note Android 7.0 Nougat Official Rom Link: Download From Lenovo Server
Added Region Codes: S116-161115 Rom added to repository who wants to test OTA
....
Thanks for the thorough write-up!
Harder than unlocking bootloader
mehmet6ok said:
1. Uninstalling Root.
We must uninstall root (supersu) on the device. Select supersu app and tap the settings.
Access > Default Access > Grant and Full Unroot > Continue > Yes > Yes
The phone is restarting now. Check the supersu app not in drawer.
Shutdown the phone.
Click to expand...
Click to collapse
I've reached that stage, what should I answer to the questions about :
1. Restore original boot.img
2. Restore original recovery.img
I'm guessing a "NO" would be safer since they were modified and we're restoring anyway...ok did that.
ok, all good, although I did have to reboot my W7 computer to disable digital signing to install the Qualcomm drivers.
Thanks again, will be useful to upgrade to N on May 17th !
webvan said:
ok, all good, although I did have to reboot my W7 computer to disable digital signing to install the Qualcomm drivers.
Thanks again, will be useful to upgrade to N on May 17th !
Click to expand...
Click to collapse
Not may 17th. 2017 may:good:
Sorry what ? I'm pretty sure I got that date from Lenovo's site, let's see, yes : https://support.lenovo.com/fr/en/solutions/ht501098?cid=ww:display:1tf0ay#smartphone
"Lenovo VIBE K6 Note Android 6.0 Marshmallow Android 7.0 Nougat May-17 Pending"
Quick question, do you see any problem in flashing the recovery.img from your 5_K53_S123_170216_ROW_STOCK.rar ? I've just found out that you could easily remove the password locks by booting into TWRP and that's making me a bit nervous. Thanks !
Official OTA update rom added to first message.
webvan said:
Quick question, do you see any problem in flashing the recovery.img from your 5_K53_S123_170216_ROW_STOCK.rar ? I've just found out that you could easily remove the password locks by booting into TWRP and that's making me a bit nervous. Thanks !
Click to expand...
Click to collapse
No not tested. Not using phone locked. I tested the xposed and modules only.
mehmet6ok said:
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
....
Click to expand...
Click to collapse
QUESTION
Is this rom can receive OTA Updates? /Excited about nougat update\
Can I flash the recovery.img and boot.img in 5 rom folder through adb/cmd command?
Do you have a flashable zip file?
Please reply to me I'm waiting
Here's the screenshot list of official update for k6 note
firemax13 said:
QUESTION
Is this rom can receive OTA Updates? /Excited about nougat update
Can I flash the recovery.img and boot.img in 5 rom folder through adb/cmd command?
Do you have a flashable zip file?
Please reply to me I'm waiting
Click to expand...
Click to collapse
Can receive Ota update: YES. select old firmware. After install you will receive the Ota update.
Tested with QComdownloader and Qfil. All OK. Not tested with command.
Flashable zip file: NO
mehmet6ok said:
Can receive Ota update: YES. select old firmware. After install you will receive the Ota update.
Tested with Qdownloader and Qfil. All OK. Not tested with command.
Flashable zip file: NO
Click to expand...
Click to collapse
Thanks!
mehmet6ok said:
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
....
Click to expand...
Click to collapse
Question
It will wipe my all data and my important files?
firemax13 said:
Question
It will wipe my all data and my important files?
Click to expand...
Click to collapse
First time installation from root to unroot: YES
Do Backup
After installing the S116-161116, OTA UPDATE to S123-170216 Rom: NO
mehmet6ok said:
First time installation from root to unroot: YES
Do Backup
After installing the S116-161116, OTA UPDATE to S123-170216 Rom: NO
Click to expand...
Click to collapse
If I will flash the latest S123-170216 ROM still can receive the nougat update?
Or I need to flash the old S116-161116 ROM and update via OTA the latest S123-170216 ROM and receive the nougat update?
firemax13 said:
If I will flash the latest S123-170216 ROM still can receive the nougat update?
Or I need to flash the old S116-161116 ROM and update via OTA the latest S123-170216 ROM and receive the nougat update?
Click to expand...
Click to collapse
No difference and no matters. Old firmware was an ota working test for me.
According to net sniffing with latest rom, system updater apk can succesfully checks server and running.
There seems no problem.
Sent from my Lenovo Leovo VIBE K6 Note using XDA Labs
mehmet6ok said:
No difference and no matters. Old firmware was an ota working test for me.
According to net sniffing with latest rom, system updater apk can succesfully checks server and running.
There seems no problem.
Click to expand...
Click to collapse
SORRY FOR DISTURBANCE AND NOOB QUESTION
And also thank you so much for your cooperate
Sent from my Lenovo VIBE K6 Note using XDA Labs
---------- Post added at 03:03 PM ---------- Previous post was at 02:52 PM ----------
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Can I upload your file to MediaFire and MEGA for faster download?
Because Google Drive is so slow downloading can't wait here in Philippines.....All we know here in Philippines the connection is to slow.....
I can provide you a link for both MediaFire and MEGA.
firemax13 said:
SORRY FOR DISTURBANCE AND NOOB QUESTION
And also thank you so much for your cooperate
Sent from my Lenovo VIBE K6 Note using XDA Labs
---------- Post added at 03:03 PM ---------- Previous post was at 02:52 PM ----------
Reguired Files
First Download all required files from here http://goo.gl/Gfs1zf
Install Drivers in 2_Driver.rar
Install softwares in 3_Microsoft C.rar (For 64bit Windows install Both)
Can I upload your file to MediaFire and MEGA for faster download?
Because Google Drive is so slow downloading can't wait here in Philippines.....All we know here in Philippines the connection is to slow.....
I can provide you a link for both MediaFire and MEGA.
Click to expand...
Click to collapse
No problem...And let me share the new links.
mehmet6ok said:
No problem...And let me share the new links.
Click to expand...
Click to collapse
I'm own my way tomorrow I will upload the link.
Please report to me if the link broke or down.
Thanks again!
mehmet6ok said:
According to adilrenzu's guide here we are now able to root Lenovo K6 Note successflully. This guide is for users who want to change their phones to the factory original state. I tested this with my lenovo k6 note. Bu as you know rooting and unrooting operations are dangerous and may brick your phone. Please do it with your own risk.
....
Click to expand...
Click to collapse
LINKSHere's the link I made.
I will upload the S116-161116 ROM and S123-170216 ROM later.
LINKS:
Adb_setup-1.3.zip
Link: http://www.mediafire.com/file/1s22pdptn8q8oox/1_adb-setup-1.3.exe
Driver.rar / Lenovo Usb Driver
Link: http://www.mediafire.com/file/rf4hfmm6nq8bw9s/2_Driver.rar
Microsoft C.rar
Link: http://www.mediafire.com/file/v6so59rww6o6b8f/3_Microsoft_C.rar
QcomDLoader.rar
Link: http://www.mediafire.com/file/i9pnl00kl2e22c2/4_QcomDLoader_(1).rar
Platform_Tools_Windows.zip with fastboot
Link: http://www.mediafire.com/file/1h71jaodrc2om06/platform-tools-latest-windows.zip
( PS. PLEASE REPORT IF THE LINK IS BROKEN OR CORRUPTED )
Please like button!!:good::good::good:
Wait for the ROM link I will upload it later
Related
[ROM][Official Beta][7D-503L & 7D-501u][Lollipop 5.1.1][EMUI 3.1][C208B011SP05/SP06]
Huawei has officially started its lollipop upgrade program for MediaPad X1 (7D-503L & 7D-501u) by pushing the first OTA updates to beta testers.
If you are not one of them but would still like to give it a swirl, ROM files and update instructions as below.
Flashing method is standard huawei procedures other than u will need to flash 2 files this time round, the first serves to re-partition the internal memory to accommodate lollipop.
The usual 'be careful, do it at your own risks' caveats apply, do take note that everything on the phone's internal memory (the 16GB part) will be wiped, your microSD card will not be affected though.
Have fun!
Not working:
1) Please note MHL (HDMI) function is not available in this ROM, if you require this function, do not update.
2) Xposed Framework is also a no go on EMUI 3.1 without modding, if u really must try, remember to have the uninstaller (flashable zip) ready in your microSD card, u will need that when you run into a X1 that fails to boot
(Huawei's default per app 320/400 dpi setting is working fine, thus non working Xposed is non consequential if u only need it for this purpose)
Steps:
1) Ensure your X1 (501u and 503L) is on the latest official (non-rooted) EMUI 3.0 B011 ROM, if not, kindly update to it
7D-501u - http://emuirom123.dbankcloud.com/7D-501u_EMUI3.0_Android4.4_V100R002C208B011.zip?rid=1141
7D-503L - http://emuirom123.dbankcloud.com/7D-503L_EMUI3.0_Android4.4_V100R002C208B011.zip?rid=1142
Clear cache and reset to factory settings before you flash the Beta 5.1.1 below.
2) Download the 2 necessary ROM files (the smaller 30+MB one is an update for modem / radio / kernel and also for re-partitioning etc; the larger near 1GB file is the ROM proper)
7D-503L
http://www.mediafire.com/download/9ea7yb206d869ya/7D-503LV100R002C208B011SP05.zip
http://www.mediafire.com/download/7o9g94z8c756ijs/7D-503LV100R002C208B011SP05_Main.zip
7D-501u
http://www.mediafire.com/download/pfp85guitv71745/7D-501uV100R002C208B011SP06.zip
http://www.mediafire.com/download/dld8lxrewj288tm/7D-501uV100R002C208B011SP06_Main.zip
3) At the root of your microSD card, create a folder and name it 'dload', rename the 30+MB file to 'update.zip' and copy that into 'dload' folder
4) Go to 'Settings', 'Updater', 'Menu' and 'Local update'. Choose the (only) update available and perform the update.
5) Phone will reboot and update will run, when you see a big tick, eject the microSD card and the phone will reboot again (if it doesn't, simply long press the power button to force shut and restart it).
6) After the phone has rebooted, re-insert the microSD, navigate to 'dload' folder and erase the update.zip file
7) Unzip the near 1GB ROM file and copy the update.app file into 'dload' folder
8) Download unlmt.rar file below and copy the 0 byte cfg file into the dload folder
9) repeat above steps 4) to 6) (delete update.app instead at step 6)**
** If you are prompted for a PIN code when the phone reboots after a flash, fret not, simply force shut it by long pressing the power button, then enter Recovery by pressing the vol+ & power button simultaneously, and choose to clear cache. The PIN code request will be gone when the phone reboots
Google Play Store and Calendar / Contacts Sync
10) Your X1 should now be on 5.1.1, download and install the 3 google apk files below to get Play Store and Calendar / Contacts Sync.
(Good news here is the whole google framework already exists in the ROM, therefore there is no need to mess with root to do that)
Root
To obtain root access on this ROM, use the latest Wondershare MobileGo one click root (Win) program - thanks to jonjong http://forum.xda-developers.com/showpost.php?p=63397619&postcount=34 - to root it.
There is also another 'cleaner' method of flashing custom CWM recovery and then chainfire's update.zip, but this will involve unlocked bootloader and some knowledge or ability to read chinese, will find some time to include a detailed write-up if there is demand for it. For now, you can download the necessary below:
http://www.mediafire.com/download/i564vr6587r2ma8/X1_5.1.1_Root.rar
Both methods need an unlocked bootloader AFAIK. If u come from B011, the bootloader should already have been unlocked.
If your X1 is 501L, you can unlock your bootloader by flashing the latest B102 ROM (EMUI3.0 / KK 4.4.2 / International / GAPPS) released by Huawei Germany - thanks to super_sonic http://forum.xda-developers.com/showpost.php?p=63420650&postcount=50
B102 download: http://www.mediafire.com/download/i...iaPad_X1_SDCard_Update_Android_4.4.2_B102.zip
Do note that if you do a factory reset after updating to 5.1.1 or re-flash 5.1.1 within 5.1.1, there is a chance that the bootloader will be re-locked.
Your mileage may vary.
Good luck
what about 501u ??
Great! Finally! Waiting for 501U
How is the performance guys. Is it snappier or the same lags?
Thank you very much, have been waiting for this since August as promised by Huawei. I don't want to stuck at kitkat (B011).
---------- Post added at 01:36 PM ---------- Previous post was at 01:33 PM ----------
With my 2 cents, you can use this rom on 501u with 4G switch off.
I dont understand,i have done everything right,but still its 4.4.2 and not 5.1.1.
And it doesnt recognize which version i have!!
When it boots it says android,and it doesnt have the Honor X1 logo.
drake19 said:
I dont understand,i have done everything right,but still its 4.4.2 and not 5.1.1.
And it doesnt recognize which version i have!!
When it boots it says android,and it doesnt have the Honor X1 logo.
Click to expand...
Click to collapse
reset the phone to factory settings, clear cache and re-flash.
hope it helps.
potatohead said:
reset the phone to factory settings, clear cache and re-flash.
hope it helps.
Click to expand...
Click to collapse
I have reset the phone,cleared cache but it does not re-flash the rom,it says something in chinese and it has and explanion mark.
When i flashed the first small update,in system info,it was saying that is B011SP5 but it wasnt 5.1.1.
drake19 said:
I have reset the phone,cleared cache but it does not re-flash the rom,it says something in chinese and it has and explanion mark.
When i flashed the first small update,in system info,it was saying that is B011SP5 but it wasnt 5.1.1.
Click to expand...
Click to collapse
have u tried flashing the big file it in recovery?
if still not working, download and unzip the attached file, put the unzipped 0 byte cfg file together with update.app in dload folder, reboot the phone and see if it auto flashes, if it does, hope it flashes as per normal.
if it doesn't, restart in recovery and tried flashing it again.
potatohead said:
have u tried flashing the big file it in recovery?
if still not working, download and unzip the attached file, put the unzipped 0 byte cfg file together with update.app in dload folder, reboot the phone and see if it auto flashes, if it does, hope it flashes as per normal.
if it doesn't, restart in recovery and tried flashing it again.
Click to expand...
Click to collapse
It flashes the rom but its the same,old android logo on boot and it thinks that it have 4.4.2 not 5.1.1.
Mine X1 it came with european rom 7D-501L but on the box the model is 7D-503L,i flashed the 4.4.2 with the product flag.
drake19 said:
It flashes the rom but its the same,old android logo on boot and it thinks that it have 4.4.2 not 5.1.1.
Mine X1 it came with european rom 7D-501L but on the box the model is 7D-503L,i flashed the 4.4.2 with the product flag.
Click to expand...
Click to collapse
1st try also same problem as yours, I tried with dload contain only update.app then successful. Hope this will help.
jonjong said:
1st try also same problem as yours, I tried with dload contain only update.app then successful. Hope this will help.
Click to expand...
Click to collapse
Have you flashed it via updater at second time!?
Thank you so much, working great for 501L
Please more details for my 501l
Should i flash the modem file too before updating with the main file as per suggested procedure.. how did you manage to make this work on a 501l .. please clarify..
anyone got root?
giuliano.rigon said:
Should i flash the modem file too before updating with the main file as per suggested procedure.. how did you manage to make this work on a 501l .. please clarify..
Click to expand...
Click to collapse
1. Ensure your X1 501L is on the latest EMUI 3.0 7D-503LV100R002C208B011 ROM.
2. Flash this rom => http://www.mediafire.com/download/9e...08B011SP05.zip
3. Follow post #9 put attach file to dload folder + main rom and copy to micro sd card, and go to restart your phone.
Good luck.
sikidim7 said:
anyone got root?
Click to expand...
Click to collapse
Same question here, tried a few methods but no prevail, my bootloader is unlocked & rooting were easy on Kitkat. Any advise?
File was removed from mediafire apparently.. .. is it the same one you can download at the start of this post? i have dowloaded it already.. the file you tried to share has been in any waymodified for 501l.. thanks
---------- Post added at 09:42 AM ---------- Previous post was at 09:40 AM ----------
Cannot find file on mediafire.. is it a modificstionof the one at the start of the post, the 503l one.. i got that one..
Sorry but mediafire lists your file as unavailable.. thanks for reposting if you can..
---------- Post added at 04:22 PM ---------- Previous post was at 04:05 PM ----------
Eoo007 said:
Thank you so much, working great for 501L
Click to expand...
Click to collapse
Unrooted 501l on european b103.. how do i proceed please to flash this lollipop 503l on my phone.. if anyone could help..
giuliano.rigon said:
Sorry but mediafire lists your file as unavailable.. thanks for reposting if you can..
Unrooted 501l on european b103.. how do i proceed please to flash this lollipop 503l on my phone.. if anyone could help..
Click to expand...
Click to collapse
it is the same file i posted in the OP, it is not removed, rather Eoo007 didn't do a proper link, here u go:
http://www.mediafire.com/download/9ea7yb206d869ya/7D-503LV100R002C208B011SP05.zip
from huawei's forum, this file apparently also serves the purpose of re-partitioning to accommodate lollipop, other than updating the necessary modems.
good luck
Guide to rooting infocus Epic 1 (for windows) for build 00.
This method is only tested on build 00IN_1_360 only. If you are on the older build, first update your phone to build 00IN_1_360 then proceed. Check Build number in settings->about phone.
Proceed at your own risk, I will not be help responsible if your phone bricks, Your warranty will be void after this. Also all phone data will be lost including data on internal memory like photos, etc after these steps so take necessary backups.
Prepare your system
1. Extract and Install MTK Driver Auto Installer v5.1632 (google it)
2. Install Phone F Driver (from phone CD-emulation/driver folder upon connecting your phone)
3. Minimal ADB and Fastboot installer v.1.4.2 (from xda)
4. Download latest SuperSU flashable zip file from here
5. Download twrp-3.0.3-0-epic1-noveritynoencrypt.zip from here, extract in the folder where you have installed adb and fastboot
6. Download noencryptnoverty_boot.zip from attachments and extract to folder where you have installed adb and fastboot
Steps to root:
1. Enable Developer options in phone settings (goto phone settings -> about phone -> tap build number 7 times)
1a. Enable OEM unlock
1b. Enable USB Debugging
2. Connect phone to computer, wait for hardware to auto install
3. open cmd as administrator
3a. goto the directory where adb and fastboot is installed
4. type command:
4a.
adb reboot bootloader
(Wait for phone to come in fastboot)
4b.
fastboot OEM unlock
(press vol up key on phone)
4c.
fastboot flash boot noveritynoencrypt.img
4d.
fastboot flash recovery recovery.img
4e.
fastboot reboot
You will get an phone orange state prompt, do not worry its normal. Phone may reboot once or twice. Wait for phone to normal bootup.
5. open cmd and type command
5e.
adb reboot recovery
Phone will reboot in recovery i.e. TWRP
6. Tap on Keep system read-only. Do not swipe to allow modifications. If TWRP asks for password, don't enter any press back.
7a. Tap Wipe -> Format Data. Come out to main menu, then click reboot and then recovery to restart recovery.
7b. Tap Wipe -> Advanced Wipe -> Select Dalvik /ART, Cache, Data and Internal Storage. This is important step, as these partitions are encrypted at the moment, so if you flash anything the phone rom may corrupt.
8. Come out and then Tap Reboot -> System
9. Once the phone is back, turn off the phone. Then power on with vol up key pressed to boot into TWRP
10. Tap Backup, select all partitions, select phone storage (SD card preferred) and take backup (optional step but highly recommended )
11. Now tap install, goto the location where you had copied SuperSU zip file, flash it.
Congratulations your Phone is rooted. Reboot, see SuperSU icon in app drawer.
Many thanks to @mujammil786 for providing stock files and @Bornstud for testing twrp builds
Special thanks to our devs @DespairFactor for modifying boot.img to disable Encryption and Verity and @kirito9 for creating TWRP for our device. Without their help, it wouldn’t have been possible.
MODS
(Take backup of your ROM/Data before applying any mods)
Viper4Android (Advanced Sound Enhancement)
Hugely Customizable and better than MaxxAudio or Dolby Atmos IMHO
Now working on our device Infocus Epic 1
Need to flash the 2 attached files via TWRP before installing the official app from HERE. Although latest version v2.5.0.5 also works, but i personally prefer v2.4.0.1 (busybox required)
(Note the attached files are not my work, they are picked from here and here. Say thanks to original contributors.)
Good V4A profile: HERE
Extract it to ViPER4Android Directory in internal Storage
Xposed
Needs no introduction. Every android enthusiast should know what it is. Anyway if you are new, xposed opens limitless ROM customization(s) and useful features via 100s of its modules.
Installation:
1. Flash framework xposed-v87-sdk23-arm64.zip from HERE via TWRP. Reboot after installation will take long time (~10 - 15 minutes)
2. Install app XposedInstaller_3.1.1.apk from HERE
Restoring phone back through SUT
If you are stuck somewhere or want to restore the phone factory state (like for when giving to repair), you can restore the phone back via SUT
Link for build 1280: https://firmwarefile.com/infocus-epic-1
Also dont turn off your phone as suggested in sut readme file. It only works when your phone is on. Check below vid for more instructions
https://m.youtube.com/watch?v=eV_cId5fC9E
Reduce battery consumption & phone temperature
Found an interesting thread, mod works on our device also
https://forum.xda-developers.com/red...tings-t3687897
I have tried both flavor 1 and flavor 2 over the past week. Results with flavor 1 were positive in the beginning but for some reason standby drain shot up after 3-4 days, not sure what the reason was.
On flavor 2, I have just disabled MTK perfservice by setting
ro.mtk_perfservice_support = 0 in build.prop
Yes this limits the a72 core to 1.5ghz, but i have noticed phone is heating less and need for charging the phone has reduced. I haven't noticed much drop in performance either, but that might be as I don't use intensive apps.
Mafioso said:
I've managed to unpack nb0 file through a688 tool, however its only successful in unpacking few files before it crashes with some array size error, but the good thing is I was able to extract the scatter file for this phone before it happened.
Anyway, I was hopeful that I would be able to make backup of Stock ROM and Recovery through it via spflash tools however as it turns out, spflash tool is giving me error while doing readback BROM ERROR: STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
Not sure how to fix it, i've updated my drivers as well as i'm using latest version of spflash tool (SP_Flash_Tool_v5.1628_Win)
Attaching scatter file.
Click to expand...
Click to collapse
From where uve downloaded the stock firmware
Romeotamizh said:
From where uve downloaded the stock firmware
Click to expand...
Click to collapse
http://firmwarefile.com/infocus-epic-1
Mafioso said:
http://firmwarefile.com/infocus-epic-1
Click to expand...
Click to collapse
Oh
---------- Post added at 08:17 AM ---------- Previous post was at 08:17 AM ----------
Romeotamizh said:
Oh
Click to expand...
Click to collapse
Look in other sites bro for img files
Romeotamizh said:
Oh
---------- Post added at 08:17 AM ---------- Previous post was at 08:17 AM ----------
Look in other sites bro for img files
Click to expand...
Click to collapse
Hmm yaa, but at the moment no sites with for .img file for this phone. All sites point to this image only. Let's hope somebody posts. Thanks!
Mafioso said:
Hmm yaa, but at the moment no sites with for .img file for this phone. All sites point to this image only. Let's hope somebody posts. Thanks!
Click to expand...
Click to collapse
Ooh bro I'm happy to help but seriously i Duno about these kind of extensions hope u understand
Mafioso said:
I'm trying to root Infocus Epic 1, its a good budget phone with decent specs. Availability is only in India, not sure other regions. Anyway I'm having hard time to root it, since not much support is available. But so far, I have tried below things:
1. Tried to root with Kingroot, doesn't work .Probably because it is very new version of Marshmallow with Oct'16 patch level and kernel dated in dec 16.
2. Tried to generate scatter file via MTK Droid tool v2.5.3, after enable USB debugging in phone. The phone get detected in the tool, however create scatter file option in block map is disabled I've read somewhere, it might be due to MTK6797 (Helios x20) is quite new and is not yet fully supported by tool yet. Not sure if its true though. But if I can generate scatter file, I can extract phone's stock recovery via SPFlash tool readback to try a hand at porting twrp/cwm with some help..
3. Downloaded stock Infocus Epic 1 firmware in hope for recovering stock recovery.img or MTK scatter file, however on unpacking the firmware package, I found it contains unknown image file of nb0 extension which is it to be flashed via SUT Tool. Not sure how to unpack this file
Any more ideas, how can i atleast start with my quest to root/put custom recovery on this phone ? @Romeotamizh Pls help.
Click to expand...
Click to collapse
I can give u stock recovery of epic 1..
mujammil786 said:
I can give u stock recovery of epic 1..
Click to expand...
Click to collapse
how bro, are you able to get it via SPFlash tool readback option or are you able to unpack the nb0 file ?
Anyway you should post it here, somebody else might pick it up and build twrp for it. At the moment, I'm stuck with SPFlash tool unable to readback my phone as stated above , doubt i would be able to flash anything to test
Mafioso said:
how bro, are you able to get it via SPFlash tool readback option or are you able to unpack the nb0 file ?
Anyway you should post it here, somebody else might pick it up and build twrp for it. At the moment, I'm stuck with SPFlash tool unable to readback my phone as stated above , doubt i would be able to flash anything to test
Click to expand...
Click to collapse
I was able to extract it from last update zip
---------- Post added at 04:45 PM ---------- Previous post was at 04:33 PM ----------
Epic 1 stock recovery
https://drive.google.com/file/d/0B4FNo4vddleCNmpwcS1hS3FLam8/view?usp=drivesdk
mujammil786 said:
I was able to extract it from last update zip
Click to expand...
Click to collapse
ok I see, please post it here. I can update it in the first post. Might be useful for anyone willing to develop for this phone.
Also did you try to read-back the phone via SPFlash tool ? I'm running into issues, but maybe i'm not doing something correctly. Might be you will have better luck.
Mafioso said:
ok I see, please post it here. I can update it in the first post. Might be useful for anyone willing to develop for this phone.
Also did you try to read-back the phone via SPFlash tool ? I'm running into issues, but maybe i'm not doing something correctly. Might be you will have better luck.
Click to expand...
Click to collapse
Well i tried but i got ctrl device error ,btw i have uploaded stock recovery
mujammil786 said:
Well i tried but i got ctrl device error ,btw i have uploaded stock recovery
Click to expand...
Click to collapse
thanks, updated first post.
Mafioso said:
thanks, updated first post.
Click to expand...
Click to collapse
Thanks let's hope for best
I like this phone and the only thing lacking is Root, Hope someone will do it
I hope so too. However, it seems its not that straight forward anymore i.e. communicating with SPFlash tool on newer MTK chipsets. I was going through guides for LeTV x620 (also with MT6797), not sure but it seems they require authentication file now for the process, which might not be available for our phone.
I already tried all the other download agents like DA_PL.bin, DA_PL_High.bin, DA_BR.bin in flash tool through which this LeTV is able to communicate, it's same error for us with all.
Also other curious thing, I was unable to run any fastboot commands on this phone. The phone gets detected in fastboot when put in fastboot mode (vol - + power) i.e. I get output on fastboot devices.
However If i try to run any commands like fastboot oem get-bootinfo or fastboot oem device-info I get error message remote command unknown
Mafioso said:
I hope so too. However, it seems its not that straight forward anymore i.e. communicating with SPFlash tool on newer MTK chipsets. I was going through guides for LeTV x620 (also with MT6797), not sure but it seems they require authentication file now for the process, which might not be available for our phone.
I already tried all the other download agents like DA_PL.bin, DA_PL_High.bin, DA_BR.bin in flash tool through which this LeTV is able to communicate, it's same error for us with all.
Also other curious thing, I was unable to run any fastboot commands on this phone. The phone gets detected in fastboot when put in fastboot mode (vol - + power) i.e. I get output on fastboot devices.
However If i try to run any commands like fastboot oem get-bootinfo or fastboot oem device-info I get error message remote command unknown
Click to expand...
Click to collapse
My device does not get detect in fastboot can u show me screen shot of command u are trying....
mujammil786 said:
My device does not get detect in fastboot can u show me screen shot of command u are trying....
Click to expand...
Click to collapse
If it's not detected maybe its related to your drivers. I've installed the following drivers
1. Try installing the Phone F Driver (from phone CD-emulation upon connecting)
2. MTK Driver Auto Installer v5.1632.00 (you can get from needrom)
3. Minimal ADB and Fastboot installer v.1.4.2 (from xda)
Run cmd as administrator:
adb reboot bootloader
When phone reboots in fastboot mode
fastboot devices
You should see your phone being detected from above.
Mafioso said:
If it's not detected maybe its related to your drivers. I've installed the following drivers
1. Try installing the Phone F Driver (from phone CD-emulation upon connecting)
2. MTK Driver Auto Installer v5.1632.00 (you can get from needrom)
3. Minimal ADB and Fastboot installer v.1.4.2 (from xda)
Run cmd as administrator:
adb reboot bootloader
When phone reboots in fastboot mode
fastboot devices
You should see your phone being detected from above.
Click to expand...
Click to collapse
Ok will try thanx
bootloder get unlocked and locked too
ok so phone get detected in fastboot mode:victory: .was able to lock and unlock boot loader but without custom recovery it is no useful for us.
unlocked bootloader.
tried flashing Vernee_Apollo_Lite_P6(same spec. as epic 1) twrp recovery.
flashing done but after flashing phone refused to boot.
flashed stock recovery from update zip.
locked bootloader.
phone booted but erased internal memory after boot.
---------- Post added at 11:47 AM ---------- Previous post was at 11:44 AM ----------
do you know any guide for making twrp and i think phone will not boot if it detect any change in system partition i think
This is for Marshmallow B13. However, I can confirm that installing twrp using tenfars tool still works even on latest B17 nougat or B08 mifavor 5.
However, some users don't have luck with it.
I advise to check first on Axon Toolkit located here:
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108
I made this guide for users who haven't unlocked and rooted their A2017 B13 chinese version.
After reading so many guides here from @tenfar, @DrakenFX, and many others, I finally unlocked bootloader, rooted, installed TWRP and Xposed.
I take no responsibility if anything happens to your phone while doing this process. Just follow every step stated here and hope you don't mess around. Please READ all the instructions here first before doing anything.
Backup all your important data before you do any steps below. This process will delete all contents of your phone except external sdcard.
Step 1: Download the zip file and extract all files to your local disk in one folder.
TWRP recovery 3.1.0-0
axon7root.zip
TWRP_UnlockBootloaderPackage_by_DrakenFX.zip do not extract this file.
Step 2: Enable USB debugging and OEM unlocking under Developer options. to show Developer options, go to Settings, About phone, tap Build Number 7x.
Step 3: Open Windows Explorer and browse to the folder where you extracted the files downloaded above. Press and hold SHIFT key then right click and choose Open Command Window here. type:
Code:
adb reboot edl
This will reboot the phone in edl mode where it's just black screen.
Step 4: Install the Qualcomm's driver .
Download Qualcomm driver to your local disk ,extract and install it
Qualcomm 9008 driver : http://d-h.st/35tx
in the install process choose WWAN, the first option.
Alternative: you could just also install the native drivers provided by the phone. If you have done step 2 already, just long press Power button for about 10seconds to reboot to its system. Once booted, connect your phone to your pc via usb and swipe down from the notification. Choose "install drivers" from the connect options. Open your Windows Explorer and find the new drive containing the driver. After installing, repeat step 3.
Step 5 : open your PC's device manager and find out the com port number which your phone is from COM ports & LPT tree.
Code:
Usage Example: axon7root.exe -p COM4 -b -r
Options:
-p Port number eg: COM8 or 8
-b write boot.img only
-r write recovery.img only
-d dump boot.img and recovery.img from phone(not impl yet)
Step 6: in the command window from step 3, type:
Code:
axon7backup.exe -p COM# -d
replace # with the number of your COM PORT.
This will save the backup files for you stock boot and recovery image.
Step 7: to install TWRP, type:
Code:
axon7root.exe -p COM# -r
Step 8: reboot to TWRP by holding POWER + UP buttons.
Optional:
Step 8a: Copy twrp-3.1.0-0-ailsa_ii.img to your sdcard/extsd. Update to latest TWRP. Install -> IMG (lower right button) -> choose twrp-3.1.0-0-ailsa_ii.img. (Don't reboot to system yet)
Step 8b: From the TWRP, find Reboot to recovery. verify that you have version 3.1.0-0 already.
Step 9: Copy TWRP_UnlockBootloaderPackage_by_DrakenFX.zip to your sdcard/extsd.
Step 10: Back-up and pull current fastboot image. Type:
Code:
adb shell dd if=/dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img
adb pull /sdcard/fbop_lock.img
Step 11: Flash/Install TWRP_UnlockBootloaderPackage_by_DrakenFX.zip. (do not reboot yet)
Step 12: Type:
Code:
adb reboot bootloader
Step 13: Now let's Unlock the Bootloader. (THIS WILL WIPE DATA+INTERNAL STORAGE)
Type:
Code:
fastboot oem unlock
Confirm yes from your phone.
Step 14: You'll boot in TWRP. once there do the following:
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions
Step 15: Once done, REBOOT system. Follow the setup wizard to gain access to your phone. enable USB debugging again.
Optional: To install root, Boot to recovery again and install/flash SUPERSU 2.79. download at UPDATE-SuperSU-v2.79-20161211114519.zip and copy to your sdcard.
To install Xposed (for MM only), flash xposed-v87-sdk23-arm64.zip and install the apk XposedInstaller_3.1.1.apk.
Do not REBOOT after installation of Supersu and Xposed. Instead, go to Terminal and type:
Code:
reboot disemmcwp
Credits to all the great minds here in xda for doing all their best.
UPDATE: TWRP flashable zips available. Credits to @parazite69 and the russians for these.
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE3Lyb!vQuJlu6apdIrqdBqqgxEHsiKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJyGCiC!0CkXk0yj17HK-JTkvkM5JuKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
I would like this as well.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
BlazingBullets said:
I would like this as well.
Click to expand...
Click to collapse
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
otaconremo said:
I suggest do a full update to b13 using sdcard update first..
the file can be found on this thread.
https://forum.xda-developers.com/axon-7/development/axon-7-chinese-stock-roms-t3436817
When I got my phone, it was also on B11 rooted. but I upgraded it to B13 without problems.
Click to expand...
Click to collapse
doesn't work if you are unlocked or not using the stock recovery
BlazingBullets said:
doesn't work if you are unlocked or not using the stock recovery
Click to expand...
Click to collapse
I can confirm it's not working, root, unlocked and TWRP.
If somebody can compile B13 for TWRP will really help us.
Thanks!
You're right. You'll need stock recovery to do a full update though. I haven't backed up my B11 stock recovery but I do have the B13 stock boot and recovery. Message me if you want those files.
Sadly no one else wants to make a twrp update for B13. And I don't know how. I already asked from draken a couple of months ago but i think he has never got a time for it.
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
thanhtri87 said:
Can you help me,
I try to step by step but step 8
Went i push POWER + UP volume, i have a black screen, not TWRP, i can not do any thing
Click to expand...
Click to collapse
try pressing just the power and Up buttons until it reboots and release when you see the ZTE logo. that should enter you into recovery.
yvgamer94 said:
I would love to try this since I want to try installing a2017U nougat ora2017 G software instead Chinese stock but the link for axon7backup: http://d-h.st/Ienb is timing out and dead. I can't seem to get any twrp recoveries working with the other axon7tool method https://forum.xda-developers.com/axon-7/development/axon7tool-flash-backup-boot-recovery-t3514254 and also the signed twrp is gone. I need a working recovery the files from here. Will try reinstalling b10 and then try find b11 for the current recoveries to see if any work instead of giving me a black recovery screen.
Click to expand...
Click to collapse
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
HTC55555 said:
Hello was wondering about the terminal reboot portion. I've been rooted with SU for a few days now can I just flash Xposed and install the apk without the worry of using terminal? Thanks
Sent from my ZTE A2017U using XDA-Developers Legacy app
Click to expand...
Click to collapse
have you tried your method without the terminal command? personally, I don't know if that works without the command but I just used it since it won't harm anyway.
danromania said:
I'm stuck at B11 A2017 chinese version, can you give me a link for B13 for twrp flash?
Click to expand...
Click to collapse
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
parazite69 said:
Hi just used from a russian website , Flashable b13 zip!
ZTE_A2017V1.0.0B13_BootStack_by_djkuz.zip https://mega.nz/#!AwpE…siKdy3Aje3vdqXJupa9A4s
CRC32: CEE662FD
MD5: 67635E2EEE51BFF0E3B6F73591BA88B8
SHA-1: DAC1646FD8B0349CF262C7FD4C15987D5F700304
ZTE_A2017V1.0.0B13_StockSystem_by_djkuz.zip https://mega.nz/#!gpJy…uKflqeeCugZQosmbGj9xPk
CRC32: 79D0419A
MD5: DDD785A98FD32144920970B6B6BE8089
SHA-1: C96EDFE8F414A0D6904DAB1ED8673591D8DE496B
I am using it and it works! I Have just updated the bootstack and then installed the ZAD rom, but if you like the stock just install them both!
Click to expand...
Click to collapse
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
otaconremo said:
the links were up okay as I opened them now. you may want to disable your antivirus too since this will trigger it false positive.
also, all the files I used were posted in the links i posted. credits to the owners btw.
Click to expand...
Click to collapse
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
yvgamer94 said:
Thanks for replying. The link works until you try to download it. When you get past the ads, you get to this http://fs1.d-h.st/download/00237/Ienb/axon7backup.zip Did you also try downloading it? Either I am doing something wrong? Thanks.
Click to expand...
Click to collapse
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
otaconremo said:
Great find! Do you mind if I put this in my OP so that others can use it too? Seems like a lot of other users can't manage to get my method well.
Click to expand...
Click to collapse
Sure go ahead.
otaconremo said:
Yes I did download my files using those links. Try installing adblock plus on your browser. Or try other browsers.
Click to expand...
Click to collapse
It's probably just my pc or browser. It's ok though since I managed bootloader unlock and flash twrp with this guide instead:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514/
Thanks for your help though
I have one (stupid) question for which I can't find answer: I stuck at step 2 when I need to enable OEM unlocking. Problem is that some PIN is required but I don't know it and don't know where to find it? Many thanks!
INSTALL STOCK PIE USING BELOW INSTRUCTIONS
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2. Install Adb drivers on windows if you are using windows or if you are using linux install adb drivers in linux
3. This firmware can't be Install Using NOST or OSTLA , because This firmware is A home Brew File pulled From DRG345B Ota File
4. So i Included bat script for windows and shell Script For linux Just use that file To Flash the firmware
5. you people will receive OTA updates monthly When Nokia Rolled out Security Patch updates
6. Simply I Can say this is equal to Stock Rom
INSTALLATION PROCEDURE
1. Download my Stock Pie firmware
2. Extract it in One folder
3. make sure that you have been already installed Adb drivers in your respective OS
4. Now turn of your phone , connect Your phone to pc Using Type C usb Cable
5. now wait until your phone show charging animation and now press volume down & power key for 5 seconds at a time
6. now you people will be in download mode
7. click on flash_all.bat(windows) , flash_all.sh (linux) in extracted folder
8. Now sit back and relax for 15 minutes it will do the job and autometically your phone reboots and it will boot up
9. congratulations now you are on stock pie DRG-345B December security Patch 2018
DOWNLOAD STOCK PIE FROM BELOW LINK
NAME - DRG-345B-0-00WW-B01-PIE-DEC2018
Download Link
Please Hit Thanks Button If You Understand My Guide. Keep Going...!!!
Thank you
hey ...so had a custom ROM installed, then flashed nit with the instructions u gave... everything works fine... but i cant seem to find "update phone"....
xoro091 said:
hey ...so had a custom ROM installed, then flashed nit with the instructions u gave... everything works fine... but i cant seem to find "update phone"....
Click to expand...
Click to collapse
just fatory reset
xoro091 said:
hey ...so had a custom ROM installed, then flashed nit with the instructions u gave... everything works fine... but i cant seem to find "update phone"....
Click to expand...
Click to collapse
You will receive ota updates may be issue is with your phone just do factory reset or click on software update to check
link to firmware down
Android 10 was released today for Galaxy M30 (INS) ,
Here i am posting 2 links
1. For users Who Just Want Stock Rom as it is
2. For Users Who Need rooted stock rom
Steps :
1. Download Zip and Extract
2. For without root users just flashing via odin would be enough
3. Progress if you wana root
4. when your done with setting up your stock rom , go into Software info and activate developer option
5. Turn on OEM unlock and turn off Auto Update System
6. Boot into download mode again
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
10. now be careful and press volume down and power till your device boots and quickly press volume up and power to boot into recovery mode
11. Wipe Data in stock recovery and reboot and your good to go
So Here's a Grive Link
Both Firmwares need to be extracted and flashed via odin
Unrooted Stock Firmware
Stock Unrooted
Magisk Rooted
Magisk Rooted
XDAevDB Information
ANDROID 10 (ONEUI 2) Stock Firmware and Rooted (M305FDDU3CSL4), ROM for the Samsung Galaxy M30
Contributors
Er. Aditya
ROM OS Version: Android 10
Thanks to ,
Samsung For Firmware
topjohnwu for magisk
reserved just in case
last one
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
shrmp said:
Sorry for ignorance, but... how do I flash the stock unrooted firmware using Odin?
Click to expand...
Click to collapse
unzip the zip file and there u will find these files
AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
in odin on your right you will find slots to select files
under BL choose BL_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
under AP choose AP_M305FDDU3CSL4_CL17406009_QB27774088_REV00_user_low_ship_meta_RKEY_OS10.tar.md5
under CP choose CP_M305FDDU3CSL1_CP14521597_CL17406009_QB27626610_REV00_user_low_ship.tar.md5
under CSC choose HOME_CSC_OMC_ODM_M305FODM3CSL4_CL17406009_QB27774088_REV00_user_low_ship.tar.md5
make sure ur phone is in download mode and you have your drivers installed
I see, does updating with Odin erase userdata?
---------- Post added at 22:05 ---------- Previous post was at 21:08 ----------
Nevermind, I just tried flashing the update but it does not work with the SM-M305M variant. Back to waiting...
Er. Aditya said:
7. open odin and turn off auto reboot
8. Choose the magisk patched zip and extract
9. In Odin under AP choose this tar and flashed
Click to expand...
Click to collapse
But, in Magisk here, it states:
Reboot to download mode, and flash magisk_patched.tar as AP in Odin, together with the BL, CP and HOME_CSC files. Never flash only an AP file, as Odin can shrink your /data file-system if you do.
Will it be any issues, if we just flash the AP?
Thanks. Flashed Magisk now.
Can i simply falsh it with twrp??
i did everything correctly i'm stuck on Samsung Boot Logo
help
zer0C00L...... said:
i did everything correctly i'm stuck on Samsung Boot Logo
help
Click to expand...
Click to collapse
these steps have been tested alot of times so make sure you dont miss any
Prxtek said:
Can i simply falsh it with twrp??
Click to expand...
Click to collapse
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
Er. Aditya said:
these steps have been tested alot of times so make sure you dont miss any
Click to expand...
Click to collapse
By any chance you have a list of bloatwares to remove?
vdbhb59 said:
Nope. Plus this phone does not have a TWRP for Q as of now. Moreover, please do not try any TWRP as of now.
Use ODIN only.
---------- Post added at 00:48 ---------- Previous post was at 00:46 ----------
By any chance you have a list of bloatwares to remove?
Click to expand...
Click to collapse
with root you can simply use titanium backuo and remove according to you
Er. Aditya said:
with root you can simply use titanium backuo and remove according to you
Click to expand...
Click to collapse
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
vdbhb59 said:
I tried, and I end up in bootloop, millions of times..
Trouble is, some inbuilt apps are bound with /system, and unable to get through. Moreover, you cannot imagine, I have been into bootloop 11 times since last evening.
So, if a list is present, I would be happy.
Last thing, did you notice, even if you have not logged into google account, it still keeps installing those 5 bloody recommended apps.
Click to expand...
Click to collapse
thats google preload stuff but happens just once , i havent faced this issue yet between make a list of apps your removing il take a look
and il work on a debloated version once i get some time
Please upload to one of the alternative sites (google quota block)
Whats the deal with U3, U4, U5 and greater version of bootloaders with Exynos chipset?
I know Samsung has locked bootloaders of USA snapdragon variants, but can all exynos chip-set ones be unlocked?
Or till U2 bootloader can be unlocked and can have root but above U3 cannot be rooted?
It's so confusing, Please someone Help me
Posted for the latest Patched Magisk here: https://forum.xda-developers.com/ga...d-firmware-t4026819/post81336955#post81336955
---------- Post added at 01:52 ---------- Previous post was at 01:52 ----------
For guides: https://forum.xda-developers.com/galaxy-m30/how-to/guide-galaxy-m30-recovery-edl-modes-t4020231
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
kesleyf said:
The M305M variant firmware with Android 10 can be found on sammobile. Can it be flashed without regard for the country it was made for or it has to be the same as the original firmware?
Click to expand...
Click to collapse
Can be used. However ensure you have mounted system.
You may lose data due to that. So ensure to have a backup.