Hi
I don't know where to publish this thread cause there is no Zenfone 3 Zoom Section
So I will write it here till the moderators make the section
This thread is method for changing the stock ROM from Chinese version to worldwide version
NOTE : You can't flash ww ROM from TWRP even if you change the Updater script , also it can't be flashed from ASUS flashtool. [ I attached photos for it ]
Required things :
1- Unlocked Bootloader | you can Download the unlock app from herehttps://ln.sync.com/dl/be16e9f30/h5hsy3iq-ruag2n8n-v293cg8a-wi29bypk
2- adb & fastboot drivers | download it from here
3- WW ROM | from here
** You have to make a backup for your data cause your device will be wiped .
Steps :
1- Unlock the bootloader .
2- Install the adb & fastboot drivers on your PC
3- extract the ROM file [ will have a lot of files , you only need System.img and boot.img]
4- copy System.img and boot.img to adb&fastboot folder
5- open command Prompt
6- put your devices in fastboot mode [ restart your device then press the Vol.Up button and choose fastboot]
7- enter these commands in cmd :
fastboot flash boot boot.img
fastboot flash system system.img
fastboot format userdata
fastboot reboot
8- enjoy your new ww rom
** if you want to flash twrp then >>
1- install it from here
2- enter fastboot mode
3- in cmd , write this command
fastboot flash recovery twrp.img
DONE
photos attached for
battery Status after installing WW ROM
difference between the WB in WW ROM and CN ROM
The errors shown when flashing WW ROM from TWRP or asus flashtool
Nice guide
awesome
I know this isn't the thread for it... but there is no forum for the ZenFone 3 Zoom.
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week. It obviously doesn't flash in TWRP. I also can't unzip it without corruption errors. Redownloaded the ROM multiple times from ASUS.
I assume to update stock rom with an unlocked Bootloader we'll need stock recovery??
DriveEuro said:
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week.
Click to expand...
Click to collapse
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
calus said:
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
Click to expand...
Click to collapse
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
DriveEuro said:
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
Click to expand...
Click to collapse
And where was that twrp install originally from? I haven't found an image for this model specifically.
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Hey guys,
I need some help. I installed the apk to unlock the bootloader and my phone was fine, but after flashing twrp and installing the zip for supersu via twrp, my phone has been stuck on the boot screen. Now it says "The dm verity is not started in enforcing mode and may not work properly" when booting up. I can get back into twrp, and I've tried wiping the dalvik/art cache, system, data, and cache, but my phone still won't boot up. It's stuck on the ASUS boot screen, and I have no idea what to do now. Any help would be greatly appreciated!
magicmanfk said:
And where was that twrp install originally from? I haven't found an image for this model specifically.
Click to expand...
Click to collapse
https://www.asus.com/zentalk/tw/thread-222337-1-1.html
Use google translate.
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
magicmanfk said:
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Click to expand...
Click to collapse
No. The last update WW_V11.41.87.2 is not available for my OTA. I can download the zip though and flash. I haven't actually attempted to do this yet. I plan to flash it today. Not sure if I'll be able to do it through twrp, or if I'll have to flash back the stock recovery first.
So does this change the bands available with it? I have the WW ROM but want the additional bands the US ROM has.
why I only have system.new.dat where can i get the system.img? thank you
How did you get on with flashing the update... did you have to revert to stock recovery and if so which did you use? Thanks for your help with this.
Can I ask where/how you got the stock ROM? I'd like to make sure that these are updated/available somewhere for people on this device to use as needed, and ASUS seems to only have the updates on their website.
Is it possible to relock bootloader after converting to WW?
I'm interested in this phone. Do you know if this one is going to be shipped later this year with Snapdragon 630?. I hear something similar in a YouTube video.
JERRYZKT said:
Is it possible to relock bootloader after converting to WW?
Click to expand...
Click to collapse
Once the bootloader is unlocked it can't be relocked.
I cant find the images in the folder - are they named differently?
Already I convert CN to WW successfully. Thanks for your post . But , I want to update Nougat WW rom. Please help me boss..... I am student and ZenFone 3 Zoom is my favorite phone. Please do something for me .......
???
How can I update Nougat on ZenFone 3 Zoom.....??? Please help me .......
Related
If I flash TWRP using this method:
http://forum.xda-developers.com/red...-to-flash-twrp-recovery-unlock-t3473294/page1
Will I be able to normally flash CM/MIUI roms without unlocking bootloader. My bootloader was never unlocked btw.
I dont care about OTA update, I never dirty flash. Always clean
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
karkand said:
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
Click to expand...
Click to collapse
Also flash kernels etc.?
I have seen some discussions about which TWRP to install. Alka or Cofface.. what would you recommend?
Thanks
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
superstar007 said:
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
Click to expand...
Click to collapse
Do you have an unlocked bootloader? You need to check in fastboot mode, by typing in fastboot oem device-info
you may have to boot straight to recovery, or the recovery image may get overwritten
my bootloader is locked.i think above method is for locked bootloader.right.i pressed power+volume up right after flashing(after disconnecting cable),phone showed mi logo and then after 5-6 seconds its showing to connect cable again. also when i use miflash tool to unlock bootloader.its not showing advanced menu in miflash tool.any solutionfor that too.my desktop is windows 7 32 bit os.do i need a 64 bit os to get all options in miflash tool.pls any solution.
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
manudhomra said:
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
Click to expand...
Click to collapse
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Mononitoto said:
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Click to expand...
Click to collapse
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
superstar007 said:
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
Click to expand...
Click to collapse
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Mononitoto said:
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Click to expand...
Click to collapse
thank you so much it worked perfectly.and i hope installing xposed framework wont be a problem in the future.
Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!
Hit Thanks if I Helped You!
Regards,
PoseidonKing
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
boa05 said:
Hello,
I've installed a custom recovery, SuperSU and the xposed framework on my Wileyfox Swift 2 Plus and yesterday I've received an OTA update with wich I was (as expected) unable to update my phone. (it just rebooted to TWRP and did nothing) On their website I was only able to find an older build. I think what I have to do is install the stock recovery(to install the update then switch back to a custom one), but I don't know where to get it from.
Click to expand...
Click to collapse
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
linuxct said:
Here you go. https://drive.google.com/file/d/0B1k2IwBoVgfFVVF1UEY3cUVVY28/view?usp=sharing
I grabbed this from cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87 - flash it via Fastboot preferably.
Click to expand...
Click to collapse
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
E: footer is wrong
E: Signatur verification failed
Installation aborted.
Click to expand...
Click to collapse
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
I haven't checked myself but linuxct seems to say its an img file. You need to flash img files with fastboot. Have you tried unziping the .zip file and seeing if there are img files (e.g system.img, recovery.img)
If you don't know how to use fastboot here is a good tutorial: https://forum.xda-developers.com/showthread.php?t=2277112
Hope this helps.
zerospaced said:
I flashed TWRP so I can install SuperSU for root access
Click to expand...
Click to collapse
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
zerospaced said:
... but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Cyanogen is no more, Wileyfox's switching to an AOSP-based ROM through the following OTAs, which will be Android 7.0 Nougat and will start rolling on february. You've more info here: https://forum.xda-developers.com/swift-2/how-to/official-wileyfox-statement-regarding-t3528844
linuxct said:
You can enable that inside Developer options > Root access. There's no need to either alter your system nor unlock your bootloader if your only concern is root privileges.
Click to expand...
Click to collapse
No, I think that is only there in CyanogenMod (the community based custom rom) not in the Cyanogen OS (the proprietary OS for businesses). As far as I know no OEM can release an android phone with Gapps and root. We have an option there called "OEM unlock" which will allow you to unlock your bootloader (from a computer) but nothing else that would grant root out of box.
zerospaced said:
Exactly the same here. I flashed TWRP so I can install SuperSU for root access, now I've flashed back the stock recovery to apply the update and it ends in "Error".
It's also not possible to apply the downloaded zip-package manually (not via TWRP and not via Cyanogen recovery).
Log file says:
It's not an option for me to do a full reset each time they (who ever it might be in the future) release an update.
I bought this phone because I thought it might be easier to update/ get root access compared with e.g. Samsung devices, but in the end I must say Cyanogen OS is really bad and I hope there will be some mods soon, so I can get these bad/restrictive stock-OS off my phone...
Click to expand...
Click to collapse
Just flashing back to the stock recovery does not remove SuperSU. Due to your error I'm assuming you have a non-systemless root. In order to remove SuperSU you must flash http://downloadmirror.co/Uot/UPDATE-unSU.zip (with TWRP), and if that doesn't work I would recommend flashing back to full stock cyngn from: https://cyngn.com/support.
Cheers!
linuxct said:
You mean, a Cid face? LOL
You can revert by flashing the system.img via fastboot from the very same zip I mentioned before. You can get it here: http://builds.cyngn.com/factory/marmite/cm-13.1.4-ZNH2KAS5RM-marmite-signed-fastboot-c64f8f5d87.zip
Click to expand...
Click to collapse
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
boa05 said:
Thank you very much, I've installed the stock recovery and also uninstalled xposed framework and SuperSU so the System partition would be clean but when trying to update I get a derpy android with the text: ERROR. Does anyone know how can I fully revert to stock so I can install the update, would a factory reset solve my problem?
Click to expand...
Click to collapse
boa05 said:
Thank you very much, flashing the system.img with
Code:
fastboot flash system system.img
fixed the issue and I was able to update my system to the latest version and since it only changed the system partition, no data (files from internal/external storage) nor apps (not even their data) were deleted. After the update I had to flash TWRP, SuperSU and Xposed again.
Click to expand...
Click to collapse
Thank you, but unfortunately I've read this hint after trying the unsu method described here:
https://forum.xda-developers.com/showpost.php?p=63615067
I've installed the unsu-zip package and flashed the original boot.img via TWRP. It did not help, but since I did this I have another warning message when booting: "The dm-verity is not started in enforcing mode."
In the end I managed to get the update by installing the original zip package again and after this the OTA update worked.
What still remains is the new "dm-verity error message" right after booting....
Does anyone know if there is anywhere I can find the files to manually update to the new AOSP based ROM. Or has Wileyfox not released it?
(Or has anyone captured the PTA link?)
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
rivierakid said:
There is currently no new AOSP ROM. I've received only Cyanogen OS update (probably the last one?). According the Wileyfox statement on facebook, the new ROM (Nougat) will be released in the february...
Click to expand...
Click to collapse
Nah they are releasing an update first to transition to their new rom.
"We have been ruthlessly testing this and planning a distribution for this update, with a rollout to be released beginning today with immediate effect." -Wileyfox Facebook
Click to expand...
Click to collapse
Then later (between February and end of Q1) they will release nougat. Its an easy mistake to make as they aren't too clear about it.
Thanks anyway.
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
The new update
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
I don't think it'd be a good idea to mess with the bootloader for now. Also, I uninstalled SuperSU from the app. If you have xposed I suggest you uninstall that too (At least that's what I did). Sorry I can't help more I 'm still a little newby myself.
rivierakid said:
It is unclear what kind of ROM will they release. According the statement it should be bloatware free OS
AOSP, Lineage OS, something else?
I really like cyanogenmod, so I hope there will be Lineage OS ROM in the future...
Click to expand...
Click to collapse
Sadly, an OEM cannot rely on community-driven software, so it surely won't be CyanogenMod/Lineage. But, that doesn't mean that in the future we wouldn't be able to enjoy it thanks to custom ROM development
Jahane said:
Hi, I'm not in the least technologically minded so please don't take the mick when I ask, will the new update delete the cyanogen os? Or is that something I will have to do? If so, what is safe to delete without damaging my phone?
Wow, that was a couple more questions then I had thought!
Thanks all.
Click to expand...
Click to collapse
Welcome to the community!
This depends on what you understand about 'new update'. If the new update you're talking about is the currently rolling OTA, the one that's getting prompted on every phone right now, no, that won't delete CyanogenOS yet, but prepare the device to upgrade to a CyanogenOS-free Android 7.0 ROM, which will happen in a month or so. You won't have to do anything but let the phone update each and every single time it requests it. Cyanogen itself is not something you can remove as a user, unless you install what's called a custom ROM (this means, a different ROM software than the one provided by Wileyfox), so, you don't need to worry about it but keeping your device up-to-date as soon as it prompts you with an update ^_^
MCPoppa said:
Hello,
iam very frustrated by this OTA thing..
I had TWRP and SuperSU installed and i've tried everything but I can't install this OTA -.-" everytime i've tried it it gives me just an "ERROR".
1. I flashed the unSU zip in twrp.
2. I set the switch for stock recovery in developer options.
3 I fastboot flashed the stock recovery.img
4 I fastboot flashed the stock system.img
Then rebooted and did the update it just runs to like 20% and stops and then it shows me "ERROR" ..
Can somebody experienced help me pls This update is annoying I had to block it out of my mobile data use because it would eat up all my mobile data
EDIT: Maybe I have to relock my bootloader?
Click to expand...
Click to collapse
Try relocking like you said, but before, flash everything included in the latest CyanogenOS fasboot image zip (from here). To flash all of them at once, execute each and every of the following commands:
Code:
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot flash cache cache.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp adspso.bin
fastboot flash devcfg devcfg.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash keymaster keymaster.mbn
fastboot flash rpm rpm.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash splash splash.img
fastboot flash tz tz.mbn
Once done, relock your bootloader by doing:
Code:
fastboot oem lock
Please note, this probably doesn't fully lock your bootloader, as some propietary DRM keys might've been lost during the unlock process...
Good luck and please, keep us posted!
Here is the last version at the moment of the Maze alpha ROM (tested only in 4GB version)
It's a complete ROM, not an OTA update, it can be flashed using the provided TWRP 3.2.1 version, I ported from a Jemmini (many thanks) version for Bluboo S1.
Unfortunately, the TWRP cannot be flashed (issue with the touch panel), only launched by fastboot.
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
There is also a SPFlashTool clean version of this ROM, useful in case of troubles (as official: no root, no busybox)
1- Reboot you phone in fastboot mode : adb reboot bootloader
2- Flash the provided TWRP : fastboot flash recovery recovery_maze_alpha_4G_twrp-321.img
3- Reboot to TWRP recovery
4- copy in your SDCARD and install, in the running TWRP, the downloaded ROM V09 : Maze_Alpha_4GB_v09_TWRP.zip
The first boot take some minutes so be patient.
Here the SPFlashTool versions :
MAZE_Alpha_4GB_V09_SPFT.zip
Here, if needed, my V09 TWRP backup (new one from 21/04/2018) :
TWRP_BACKUP_MAZE_Alpha_A_V09.zip
Credits to Jemmini and Magisk team.
Can you make this for the 6 gb version?
many thanks gonna ty it soon
Nautilus99 said:
Can you make this for the 6 gb version?
Click to expand...
Click to collapse
I do not have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
dreambo said:
I do note have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
Click to expand...
Click to collapse
Yes i know its sad, i did a backup of mine and root it but it didnt work the backup i had to do clean flash, if we can manage to have a twrp and a source of the stock roms we could make a deabloat and put update apps ( menssages, calendar etc) and put mods for awsome features i dont see RR or lineage putting thier hands on this phone
Thanks for this Rom.
Is there any root for the maze alpha x?
here
WiddleyScudds said:
Is there any root for the maze alpha x?
Click to expand...
Click to collapse
read
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
Click to expand...
Click to collapse
thorfr said:
read
Click to expand...
Click to collapse
I have an alpha x, not alpha.
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
rzoli71 said:
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
Click to expand...
Click to collapse
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
thank you
After I installed this rom, and freezed the hot knot, baidu_location FM Radio, etc, the BT connection did not break.
dreambo said:
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
Click to expand...
Click to collapse
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
ahorntaler said:
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
Click to expand...
Click to collapse
No I not have any source, I am just a simple user like any other.
If I have any source or if I can make a ROM for MAZE Alpha X, I will do it and I will share it with every body, as I do until now for the MAZE Alpha 4/64
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
iBolitN said:
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
Click to expand...
Click to collapse
Unfortunatly no. As you will see repeated times in the forum, people have issue with phone not booting after changing from stock recovery to twrp. This is do (most likely from) to verified boot setting. And by unlocking bootloader we can bypass verified boot. So without unlock you might get a successfull load into twrp, but android will not boot.
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
stargazer78 said:
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
Click to expand...
Click to collapse
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Thanks a lot for your reply....
the problem is that i cant boot into fastboot to unlock bootloader....
the phone bootloops all the time, shows the red state alert and even with vol+ pressed the menu to choose recovery or fastboot doesn't apear... thanks again.
dreambo said:
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Click to expand...
Click to collapse
Is there any way to unlock the bootloader in my situation or/and enter the fastboot mode in order to follow your steps... thanks.
Note: This process is shown for OnePlus Nord 2 and work for any MTK device just replace files as per your model you need to Serch for that)
Credits @Raygen @TheWing
After relocking bootloader you can do safety net pass check to confirm by using following app:
https://play.google.com/store/apps/details?id=org.freeandroidtools.safetynettes
Download Re LiveDVD mtk. Client ( this is ready mtk client ubuntu os no need to Install python, drivers ready to go iso)
re_livedvdV3.iso
drive.google.com
Download Rufus for windows 32/64bit)
https://github.com/pbatard/rufus/releases/download/v3.17/rufus-3.17.exe
Note:Relocking has been done on OOS 11.1 v13 so stock boot img of v13, vbmeta from update zip of v13 is required, recovery must be given below.
Your need to replace files as per oxygen os version you are using.
FOLLOWING are images of DN2101 A13 OOS UPDATE IMAGES EXCEPT RECOVERY IMAGE IT WILL WORK IN ANY PHONE, U NEED YOUR AS PER YOUR REGION I WILL UPDATE THREAD AFTER COLLECTING ALL HERE
Boot img (This is stock A13 indian, other regions must use there current OOS version boot img)( other mtk devices must use there boot img here)
https://forum.xda-developers.com/attachments/boot-img.5460945/
Stock recovery(in zip unzip it you will get img file this will work for any region)( other mtk devices must use there recovery img here)
https://forum.xda-developers.com/attachments/recovery_stock-zip.5464685/
Vbmeta:must have correct vbmeta of current OOS Rom. Version (from stock A13 indian update.zip if U r using EU, OR GLOBAL region NORD replace it with the current OOS version you are for which you want to relock)(other mtk devices must use there vbmeta img here)
vbmeta.img
drive.google.com
All files for EU DN2103 ON A12 UPDTAE :
EU varient v12 files:
Boot. Img:
https://forum.xda-developers.com/attachments/boot_stock_a12-img.5461083/
Vbmeta. Img/
vbmeta.img
drive.google.com
Recovery same link for all)
recovery_stock.zip
drive.google.com
Terminal emulator commands :
1) BOOT TO FASTBOOT connect phone to pc in on condition)
adb reboot fastboot
2)to relock bootloader in terminal emulator connect phone to pc in fastboot mode and type)
fastboot flashing lock
MTK client commands:
1)Flash boot img:
python mtk w boot boot.img
2) Flash recovery img:
python mtk w recovery recovery.img
3) Flash Vbmeta :
python mtk w vbmeta vbmeta.img
wifi is not working. everything working after relock bootloader but wifi is not working
farhansaeeddnp3021 said:
wifi is not working. everything working after relock bootloader but wifi is not working
Click to expand...
Click to collapse
Factory reset u r phone and reboot see
pankspoo said:
Factory reset u r phone and reboot see
Click to expand...
Click to collapse
i did it. but it's not working
farhansaeeddnp3021 said:
i did it. but it's not working
Click to expand...
Click to collapse
Update yourbphone to latest v14
Is there any way to relock the phone just through fastboot? After installing an OTA update, the partitions should match the vbmeta partition, right? So could just relock the bootloader using fastboot flashing lock or would the phone not start then?
NetSoerfer said:
Is there any way to relock the phone just through fastboot? After installing an OTA update, the partitions should match the vbmeta partition, right? So could just relock the bootloader using fastboot flashing lock or would the phone not start then?
Click to expand...
Click to collapse
Your device will go in to boot img corrupt after that.......
PLEASE NOTE: This isnt working if you are on a custom rom! My Bootloader ist broken and locked and I have to figure out how to fix this ****.
Hello Pankspoo.
I reset my Nord 2 again with an A11 image.
Now I wanted to lock the bootloader again. I have implemented your instructions one to one.
After that, the Nord 2 will boot normally and start.
But in the developer options I can still unlock the bootloader. So the option is not greyed out. The OTA cannot be installed but does not lead to a bootloop either.
I used the appropriate boot.img recovery & vbmeta.img.
Do you have any idea?
Best regards
7tyjupiter said:
Hello Pankspoo.
I reset my Nord 2 again with an A11 image.
Now I wanted to lock the bootloader again. I have implemented your instructions one to one.
After that, the Nord 2 will boot normally and start.
But in the developer options I can still unlock the bootloader. So the option is not greyed out. The OTA cannot be installed but does not lead to a bootloop either.
I used the appropriate boot.img recovery & vbmeta.img.
Do you have any idea?
Best regards
Click to expand...
Click to collapse
Check YASNAC app from play store if it's showing safety net check passed your locked.
While installation of OTA what's errors u r getting.
After locking OEM unlock not grates off actually now it's available to unlock again with switchable tab
Sorry for crossposting a lot today, but I am really stuck and it seems that this may be the tool I need. I am on A15, cannot lock bootloader and cannot update.
So, to be sure, for this to work I need the boot.img, recovery.img and vbmeta.img for A15 stock rom? If yes, where can I get those files?
I found the files! Thank you for this guide! It worked perfectly. I really thought my phone was completely bricked. Coming from a Pixel, the root/restore process on this thing is a complete nightmare!!
https://forum.xda-developers.com/attachments/boot-img.5460945/
this link says like this
Oops! We broke the matrix. Someone call Neo!You do not have permission to view this page or perform this action.
Ok. So I think if f-ed up big time! only message I get now is a big red "!" and: "the current image have been destroyed please flash te correct image....
HELP!
Hi, I have a question. I have an unlocked bootloader, if I have my mobile service serviced and I have the original rom reinstalled there will the botloader be locked?
lachatol said:
Hi, I have a question. I have an unlocked bootloader, if I have my mobile service serviced and I have the original rom reinstalled there will the botloader be locked?
Click to expand...
Click to collapse
Definitely, no doubt about that. But the rooting-proces after that is easy and well described here. Don't forget to FIRST take you OTA's, that makes things easier!
exis_tenz said:
Definitely, no doubt about that. But the rooting-proces after that is easy and well described here. Don't forget to FIRST take you OTA's, that makes things easier!
Click to expand...
Click to collapse
I want to lock the botloader, I don't want root anymore. I just need to be sure that if I service the phone for reinstallation to the original firmware, then the bootloader will be locked. Will be? thank you for answer
No worries, it'll be locked after a factory flash!
farhansaeeddnp3021 said:
wifi is not working. everything working after relock bootloader but wifi is not working
Click to expand...
Click to collapse
This happened to me. It turns out that I had version A10 and flashed the A12stock_boot.img and when rebooting I had no wifi. I had no twrp either, since I had just flashed the stock recovery too.
So, I figured "did this actually updated to A12?" I checked the build version on the settings and no, it did not. So maybe thats the reason the system gets confused and some functions (I only noticed wifi) don't work properly.
Anyway, this is how I solved it:
1) restored my A10 version (flashing the file I got from a link on this post)
2) rebooting to A10, I did have wifi. I tried to update to A19 through Software Updater, but even though it did download the update.zip, it failed to update ("didn't pass the verification"). So, I:
3) flashed TWRP again, rebooted into it and installed the update.zip file (in data/ota_package/) that had just been downloaded by Software Updater.
4) Rebooted.
5) Fastboot flashing lock
6) Rebooted again. Congrats, its a brand new phone!!
P.S. Don't forget to lock the OEM unlocking option in Settings.
extranoob said:
This happened to me. It turns out that I had version A10 and flashed the A12stock_boot.img and when rebooting I had no wifi. I had no twrp either, since I had just flashed the stock recovery too.
So, I figured "did this actually updated to A12?" I checked the build version on the settings and no, it did not. So maybe thats the reason the system gets confused and some functions (I only noticed wifi) don't work properly.
Anyway, this is how I solved it:
1) restored my A10 version (flashing the file I got from a link on this post)
2) rebooting to A10, I did have wifi. I tried to update to A19 through Software Updater, but even though it did download the update.zip, it failed to update ("didn't pass the verification"). So, I:
3) flashed TWRP again, rebooted into it and installed the update.zip file (in data/ota_package/) that had just been downloaded by Software Updater.
4) Rebooted.
5) Fastboot flashing lock
6) Rebooted again. Congrats, its a brand new phone!!
P.S. Don't forget to lock the OEM unlocking option in Settings.
Click to expand...
Click to collapse
If u gets wifi issue just flash boot image of OOS version u r using via fastboot
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
devil1 said:
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
Click to expand...
Click to collapse
It's not possible to switch from stock ROM to custom without doing clean install. You will have to root again.
First update to latest Official Stock ROM, then take backup of your files to your PC or to SDCard (if you have one) , flash to latest Official TWRP and check my POCO F1 Ultimate Collection & Guides. You can find everything there. I have awarded recommended ROMs in my collection.
Feel free to ask if you have any question regarding the guides.
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
devil1 said:
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
Click to expand...
Click to collapse
First you need to take backup of your files to PC or External SDCard.
Then you should update to latest version of MIUI via OTA if it's possible or via TWRP (you can use the stock recovery rom to do it via twrp). (You can also use my guides for clean install stock rom)
Then you should unlock your bootloader if it's not already unlocked.
Then flash latest Official TWRP.
Then flash latest firmware (not vendor) just to make sure you are on the latest. (You should be on latest firmware after updating to the latest MIUI version)
Then Wipe everything + format data according to my guides and flash the ROM you want. If you choose A12 Pixel Experience or crDroid keep in mind that these ROMs use their own recovery because these are encrypted by default ROMs and TWRP can't handle the decryption of A12 encrypted ROMs yet. So to make OTA updates and that stuff work correctly devs of these ROMs decide to use their own recovery which can handle the decryption of encrypted roms and as result to make OTA update work fine. Check the installation instructions of these roms in their threads. (Afterwards you can use adb sideload to flash stuff using these recoveries)
After that, flash Magisk since you want root.
Then you can restore titanium backup if you want.
OK i follow your instruction.Thanks
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
i have find this video.This is not the good phone but i think that the installation is the same:
devil1 said:
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
Click to expand...
Click to collapse
Yes use Fastboot Method to flash TWRP. No problem with encryption.
After that follow my clean install custom rom guide to flash the ROM you want. Also please check the instructions in the threads of ROMs you want to flash. A12 crDroid and PE use their own recoveries.
Basically tell me which ROM you want to flash to help you exactly with steps.
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
devil1 said:
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
Click to expand...
Click to collapse
Send a screenshot what you type in cmd and where you have the twrp.img
Or you mean you can't find it in your device while you are booted on TWRP?
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
devil1 said:
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
Click to expand...
Click to collapse
Are you sure you select Install Image?
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
devil1 said:
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
View attachment 5549731
Click to expand...
Click to collapse
I have all the steps on my guide. Please read it carefully. It boots back to mi recovery because you haven't flash TWRP yet just booted into. After boot into TWRP u need to flash twrp in recovery section so it will stay after reboot.
Please read the steps.
Download portable Minimal ADB and Fastboot and latest Official TWRP recovery.
Open cmd from minimal adb and fastboot and write:
fastboot boot and the path you have TWRP.
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.0_9-0-beryllium.img
Then proceed with the rest steps in my guide. Connect ur device to pc while u are booted into TWRP and copy TWRP.img to your device. Then in TWRP press Install Image and select the twrp.img u just copied into ur device. Select recovery and done.
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
devil1 said:
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
Click to expand...
Click to collapse
Hmm strange, probably of MIUI. Anyway since you are going to flash custom rom, when u flash twrp in recovery go back and select wipe and wipe everything (read my clean install guide), go back press format data type yes, and then reboot to TWRP.
EDIT: I just saw u rebooted to system. That's not what we want. Press reboot to recovery.
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
devil1 said:
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
Click to expand...
Click to collapse
The TWRP flashed correctly. You overlap it again by pressing reboot to recovery from MIUI updater.
Don't do that...do the combination to boot to TWRP after flashing it. Power+Volume Up.
And continue with clean install steps in my guide to flash custom rom.
In my guide I write nowhere to boot to MIUI and press from MIUI Updater reboot to recovery, please stick to my guide and you will be fine.
Poco f1 update not