Here is the last version at the moment of the Maze alpha ROM (tested only in 4GB version)
It's a complete ROM, not an OTA update, it can be flashed using the provided TWRP 3.2.1 version, I ported from a Jemmini (many thanks) version for Bluboo S1.
Unfortunately, the TWRP cannot be flashed (issue with the touch panel), only launched by fastboot.
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
There is also a SPFlashTool clean version of this ROM, useful in case of troubles (as official: no root, no busybox)
1- Reboot you phone in fastboot mode : adb reboot bootloader
2- Flash the provided TWRP : fastboot flash recovery recovery_maze_alpha_4G_twrp-321.img
3- Reboot to TWRP recovery
4- copy in your SDCARD and install, in the running TWRP, the downloaded ROM V09 : Maze_Alpha_4GB_v09_TWRP.zip
The first boot take some minutes so be patient.
Here the SPFlashTool versions :
MAZE_Alpha_4GB_V09_SPFT.zip
Here, if needed, my V09 TWRP backup (new one from 21/04/2018) :
TWRP_BACKUP_MAZE_Alpha_A_V09.zip
Credits to Jemmini and Magisk team.
Can you make this for the 6 gb version?
many thanks gonna ty it soon
Nautilus99 said:
Can you make this for the 6 gb version?
Click to expand...
Click to collapse
I do not have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
dreambo said:
I do note have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
Click to expand...
Click to collapse
Yes i know its sad, i did a backup of mine and root it but it didnt work the backup i had to do clean flash, if we can manage to have a twrp and a source of the stock roms we could make a deabloat and put update apps ( menssages, calendar etc) and put mods for awsome features i dont see RR or lineage putting thier hands on this phone
Thanks for this Rom.
Is there any root for the maze alpha x?
here
WiddleyScudds said:
Is there any root for the maze alpha x?
Click to expand...
Click to collapse
read
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
Click to expand...
Click to collapse
thorfr said:
read
Click to expand...
Click to collapse
I have an alpha x, not alpha.
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
rzoli71 said:
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
Click to expand...
Click to collapse
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
thank you
After I installed this rom, and freezed the hot knot, baidu_location FM Radio, etc, the BT connection did not break.
dreambo said:
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
Click to expand...
Click to collapse
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
ahorntaler said:
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
Click to expand...
Click to collapse
No I not have any source, I am just a simple user like any other.
If I have any source or if I can make a ROM for MAZE Alpha X, I will do it and I will share it with every body, as I do until now for the MAZE Alpha 4/64
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
iBolitN said:
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
Click to expand...
Click to collapse
Unfortunatly no. As you will see repeated times in the forum, people have issue with phone not booting after changing from stock recovery to twrp. This is do (most likely from) to verified boot setting. And by unlocking bootloader we can bypass verified boot. So without unlock you might get a successfull load into twrp, but android will not boot.
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
stargazer78 said:
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
Click to expand...
Click to collapse
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Thanks a lot for your reply....
the problem is that i cant boot into fastboot to unlock bootloader....
the phone bootloops all the time, shows the red state alert and even with vol+ pressed the menu to choose recovery or fastboot doesn't apear... thanks again.
dreambo said:
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Click to expand...
Click to collapse
Is there any way to unlock the bootloader in my situation or/and enter the fastboot mode in order to follow your steps... thanks.
Related
Rooting Method for Xperia Z Ultra Lollipop V5.1 .
What You Need :
5.1 .
Root & Recovery Pre-Installed .
Flashtool & PC .
MAKE A BACKUP FIRST
How To :
As a Start, You Gonna have Lollipop 5.0 with Root & Recovery installed .
Move 5.1 to firmwares folder .
Download This SuperSu Flashable file and move it to SDCard & Internal Storage .
Open Flashtool .
Select The ROM .
Exclude Kernel ONLY .
Flash the ROM .
Boot the Phone and enter Recovery ASAP .
Install the ZIP File, if Flashtool didn't wipe Internal storage yet, then install it from Internal storage, otherwise from SD Card .
Power Off .
Open Flashtool .
Select 5.1 .
Exclude All expect the Kernel .
Un-tick Data / Cache and the third option too .
Flash .
Boot ! .
As a feedback from my friend, he said there was not problem with 5.0 kernel on 5.1 system for first boot ( recovery entering only ) .
Please feedback, and don't forget the backup !
is it 5.1 or 5.1.1?
The quick way to root any ROM, including the newly released 5.1.1 is, if you have an unlocked bootloader:
- Hotboot any custom kernel with a recovery (fastboot)
- Flash SuperSU
- Reboot
If you want CWM/TWRP:
- Flash NUT's Dual Recovery kernel through fastboot
- Reboot
You're now rooted, and you have recovery.
NOTE: If you have no idea how to use fastboot, then you can use QuickIMG. It lets you flash .IMGs very easily without needing to use any commands. Do however read the instructions provided before you use it.
It's also a good idea to learn how to get out of a sticky situation in case something goes wrong. If you want to be on the safe side when testing kernels, hotboot, or boot an IMG/kernel instead of flashing. Once you see that the kernel is indeed working, and you're not experiencing any bootloops or red LED blinking, then you can safely flash it to disk.
Note: Hotbooting means that the device will only boot the kernel once, so it doesn't really flash it to the device. Flashing a kernel writes it to the device, making it permanent until you replace it by flashing a different kernel yourself.
jaime4272 said:
is it 5.1 or 5.1.1?
Click to expand...
Click to collapse
5.1.X
Klaos3000 said:
The quick way to root any ROM, including the newly released 5.1.1 is, if you have an unlocked bootloader:
- Hotboot any custom kernel with a recovery (fastboot)
- Flash SuperSU
- Reboot
If you want CWM/TWRP:
- Flash NUT's Dual Recovery kernel through fastboot
- Reboot
You're now rooted, and you have recovery.
NOTE: If you have no idea how to use fastboot, then you can use QuickIMG. It lets you flash .IMGs very easily without needing to use any commands. Do however read the instructions provided before you use it.
It's also a good idea to learn how to get out of a sticky situation in case something goes wrong. If you want to be on the safe side when testing kernels, hotboot, or boot an IMG/kernel instead of flashing. Once you see that the kernel is indeed working, and you're not experiencing any bootloops or red LED blinking, then you can safely flash it to disk.
Note: Hotbooting means that the device will only boot the kernel once, so it doesn't really flash it to the device. Flashing a kernel writes it to the device, making it permanent until you replace it by flashing a different kernel yourself.
Click to expand...
Click to collapse
The way for locked bootloader not for unlocked .
Anyway, anyone tested it ?
How about using the prf (pre rooted firmware) tool for locked bootloader?
Sent from my C6833 using Tapatalk
ejhayanchorez said:
How about using the prf (pre rooted firmware) tool for locked bootloader?
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I Didn't see a pre-rooted firmware, that's why i put this guide, if someone can do it and upload the firmware that's would be awesome .
hi there. I just want to say that after following your guide I could not get in to recovery after flashing the 5.1.1 ftf minus the kernel. when turning the phone on it goes straight to normal boot but it doesn't. it goes in to a boot loop. some how it removes dual recovery and can't flash SuperSU there for loosing root and yes I was rooted with dual recovery. could you explain with more details how to please because I did as you said and didn't work
jaime4272 said:
hi there. I just want to say that after following your guide I could not get in to recovery after flashing the 5.1.1 ftf minus the kernel. when turning the phone on it goes straight to normal boot but it doesn't. it goes in to a boot loop. some how it removes dual recovery and can't flash SuperSU there for loosing root and yes I was rooted with dual recovery. could you explain with more details how to please because I did as you said and didn't work
Click to expand...
Click to collapse
Follow this guide : http://forum.xda-developers.com/xpe...ck-rom-5-1-1-lollipop-xperia-z-ultra-t3206107
This guide isn't working on all devices, don't know why.
thanks i'll give it a try
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
I was flashing paranoid android 6.0.2 for my device. I downloaded the zip(from the official paranoid android website) and checked the md5 checksum, which did not match. However, like a total idiot, I flashed it nonetheless. On booting, the phone gets stuck on the boot logo. I tried booting into recovery(TWRP) and performing a factory reset to no avail. I redownloaded the flashable zip for Paranoid, successfully verified the md5 checksum and flashed it again, no avail. Restore a full backup from within TWRP, no avail. My phone still gets stuck on the bootlogo. I have looked all over every forum without any results. Please help me out? I would like to get it back to functional state and flash the rom again. As mentioned, I have access to my custom recovery and can connect to my device via fastboot. I am willing to give any other information you may need.
Thanks!
Shreyas
shreyasminocha said:
I was flashing paranoid android 6.0.2 for my device. I downloaded the zip(from the official paranoid android website) and checked the md5 checksum, which did not match. However, like a total idiot, I flashed it nonetheless. On booting, the phone gets stuck on the boot logo. I tried booting into recovery(TWRP) and performing a factory reset to no avail. I redownloaded the flashable zip for Paranoid, successfully verified the md5 checksum and flashed it again, no avail. Restore a full backup from within TWRP, no avail. My phone still gets stuck on the bootlogo. I have looked all over every forum without any results. Please help me out? I would like to get it back to functional state and flash the rom again. As mentioned, I have access to my custom recovery and can connect to my device via fastboot. I am willing to give any other information you may need.
Thanks!
Shreyas
Click to expand...
Click to collapse
What was your last rom? Did u upgrade ur bootloader?
You probably looking at mega unbrick guide
cva_kabil said:
What was your last rom? Did u upgrade ur bootloader?
Click to expand...
Click to collapse
I was running stock OxygenOS(>3.0.0) ROM.
shreyasminocha said:
I was running stock OxygenOS(>3.0.0) ROM.
Click to expand...
Click to collapse
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
cva_kabil said:
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
Click to expand...
Click to collapse
That said, should I follow a bricked guide before doing the above?
cva_kabil said:
Yeah thats d problem, PA roms are only compatible with old lollipop bootloader, u said u were in oos3 which means u hv updated to ur bootloader to marshmallow. Try clean flashing new bootloader supported roms. Before downloading check for its compatibility, all nougat roms r compatible.. U can try if u wish ))
Click to expand...
Click to collapse
Also, is there any way I can downgrade my bootloader?
shreyasminocha said:
Also, is there any way I can downgrade my bootloader?
Click to expand...
Click to collapse
Flash any 2.X.X ROM. One way is to fastboot flash old stock recovery and flash safest way I think. The other is to flash with twrp make sure after flashing the ROM to flash old twrp IMG after. Make sure you boot right back into twrp.
shreyasminocha said:
Also, is there any way I can downgrade my bootloader?
Click to expand...
Click to collapse
Assuming you're on OOS3 with TWRP for new bootloader,
- Boot into recovery
- Wipe everything except SD Card
- Flash OOS2 zip
- Boot into it
- Goto settings, unlock dev options, enable advanced reboot
- Then reboot to bootloader
- Flash twrp for old bootloader via fastboot, use this one https://dl.twrp.me/onyx/twrp-3.0.2-0-onyx.img
Done
-Now u hv sucessfully downgraded ur bootloader,flash PA or any supported roms
Used mega unbrick tool because I was unable to unlock bootloader and now I'm stuck at 1+ logo (powered by android disappears quickly), did you solve it?
edit: nevermind, adb sideload with stock OOS fixed it.
TravaPL said:
Used mega unbrick tool because I was unable to unlock bootloader and now I'm stuck at 1+ logo (powered by android disappears quickly), did you solve it?
edit: nevermind, adb sideload with stock OOS fixed it.
Click to expand...
Click to collapse
Tried mega unbrick. (bootloop)
Tried OOS3.1.4.zip via stock recovery and success message apears after installation but still bootloop (previusly it was on CM13)
Tried ADB sideload (but not booting)
i have access to ADB and Fastboot.
please help :crying:
iamsandiprathva said:
Tried mega unbrick. (bootloop)
Tried OOS3.1.4.zip via stock recovery and success message apears after installation but still bootloop (previusly it was on CM13)
Tried ADB sideload (but not booting)
i have access to ADB and Fastboot.
please help :crying:
Click to expand...
Click to collapse
Did you managed to sort it out? How?
Mega unbricked guide?
Hi
I don't know where to publish this thread cause there is no Zenfone 3 Zoom Section
So I will write it here till the moderators make the section
This thread is method for changing the stock ROM from Chinese version to worldwide version
NOTE : You can't flash ww ROM from TWRP even if you change the Updater script , also it can't be flashed from ASUS flashtool. [ I attached photos for it ]
Required things :
1- Unlocked Bootloader | you can Download the unlock app from herehttps://ln.sync.com/dl/be16e9f30/h5hsy3iq-ruag2n8n-v293cg8a-wi29bypk
2- adb & fastboot drivers | download it from here
3- WW ROM | from here
** You have to make a backup for your data cause your device will be wiped .
Steps :
1- Unlock the bootloader .
2- Install the adb & fastboot drivers on your PC
3- extract the ROM file [ will have a lot of files , you only need System.img and boot.img]
4- copy System.img and boot.img to adb&fastboot folder
5- open command Prompt
6- put your devices in fastboot mode [ restart your device then press the Vol.Up button and choose fastboot]
7- enter these commands in cmd :
fastboot flash boot boot.img
fastboot flash system system.img
fastboot format userdata
fastboot reboot
8- enjoy your new ww rom
** if you want to flash twrp then >>
1- install it from here
2- enter fastboot mode
3- in cmd , write this command
fastboot flash recovery twrp.img
DONE
photos attached for
battery Status after installing WW ROM
difference between the WB in WW ROM and CN ROM
The errors shown when flashing WW ROM from TWRP or asus flashtool
Nice guide
awesome
I know this isn't the thread for it... but there is no forum for the ZenFone 3 Zoom.
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week. It obviously doesn't flash in TWRP. I also can't unzip it without corruption errors. Redownloaded the ROM multiple times from ASUS.
I assume to update stock rom with an unlocked Bootloader we'll need stock recovery??
DriveEuro said:
I have US model and I've unlocked the bootloader, installed TWRP, rooted.
I want to install rom update that was just released last week.
Click to expand...
Click to collapse
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
calus said:
How did you do the rooting? No issues so far? Is there a guide somewhere you followed?
Click to expand...
Click to collapse
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
DriveEuro said:
Use the bootloader unlock.
Install TWRP.
Install SuperSU zip file.
Click to expand...
Click to collapse
And where was that twrp install originally from? I haven't found an image for this model specifically.
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Hey guys,
I need some help. I installed the apk to unlock the bootloader and my phone was fine, but after flashing twrp and installing the zip for supersu via twrp, my phone has been stuck on the boot screen. Now it says "The dm verity is not started in enforcing mode and may not work properly" when booting up. I can get back into twrp, and I've tried wiping the dalvik/art cache, system, data, and cache, but my phone still won't boot up. It's stuck on the ASUS boot screen, and I have no idea what to do now. Any help would be greatly appreciated!
magicmanfk said:
And where was that twrp install originally from? I haven't found an image for this model specifically.
Click to expand...
Click to collapse
https://www.asus.com/zentalk/tw/thread-222337-1-1.html
Use google translate.
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
magicmanfk said:
Also, does this bootloader unlock still allow the pushed OS updates from ASUS? Want to make sure I can get Nougat when it comes out!
Click to expand...
Click to collapse
No. The last update WW_V11.41.87.2 is not available for my OTA. I can download the zip though and flash. I haven't actually attempted to do this yet. I plan to flash it today. Not sure if I'll be able to do it through twrp, or if I'll have to flash back the stock recovery first.
So does this change the bands available with it? I have the WW ROM but want the additional bands the US ROM has.
why I only have system.new.dat where can i get the system.img? thank you
How did you get on with flashing the update... did you have to revert to stock recovery and if so which did you use? Thanks for your help with this.
Can I ask where/how you got the stock ROM? I'd like to make sure that these are updated/available somewhere for people on this device to use as needed, and ASUS seems to only have the updates on their website.
Is it possible to relock bootloader after converting to WW?
I'm interested in this phone. Do you know if this one is going to be shipped later this year with Snapdragon 630?. I hear something similar in a YouTube video.
JERRYZKT said:
Is it possible to relock bootloader after converting to WW?
Click to expand...
Click to collapse
Once the bootloader is unlocked it can't be relocked.
I cant find the images in the folder - are they named differently?
Already I convert CN to WW successfully. Thanks for your post . But , I want to update Nougat WW rom. Please help me boss..... I am student and ZenFone 3 Zoom is my favorite phone. Please do something for me .......
???
How can I update Nougat on ZenFone 3 Zoom.....??? Please help me .......
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'