As the subject says, due to the lack of wireless charging I would really like to see a cradle for the OnePlus 5 (as well as the 3/3T). I know there are plenty of USB cradles for phones out there but there are none with dash charge, I'm not sure a standard usb cradle would be able to transfer the dash charge functionality.
So, to the question, would anyone else be interested if OnePlus could make either a cradle attachment for dash charging or a cradle which would be the dash charger and just have a normal plug?
As the phone is sitting in it you could use it for an alarm clock next to your bed also while it's charging although portrait orientation would make more sense for charging.
I'll add a poll later, unfortunately, the network in my work hates XDA and the pages break all the time
just find a stand imo. you shouldn't need dash charging capabilities if you plan on using the cradle/dock for extended periods.
So I was thinking the same thing and I did find a dock with dash charging on amazon (us). I bought it and can confirm that dash charging does work.
I have some pics below and proof of dash charging.
Amazon link belo if anyone is interested
https://www.amazon.com/gp/product/B06XY8T7M8/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1
Related
i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"
I ordered mine this morning!! YAY
The first thing I'm going to do is work on plans for doing a Qi Wireless charging case. I figured I would use a thick piece of wood (or 3D printed piece of plastic ) as the "case" with a cut out for the Qi parts salvaged from something found on eBay or Amazon (from a iPhone charge case etc) and connect it all via the magnetic charge port. What I was hoping to figure out is if anyone knows the positive or negative sites on the magnetic charge connector?? Or does it even matter?
I know this project will add some bulk to the already large device, but I really would like wireless charging as I have fallen in love with it!!
Thanks in advance!
David
One thing to factor in mind is the slow charging rates with wireless charging.
With the quick charge function on the S800, you can probably go from 0-100 in 2hours. Whereas with wireless charging it could take 8+ hours. Great if you just want to leave it on your desk at work I guess, but from personal experience with modding the note 2 to be wireless charging compatible, it was rarely a practical as I always used the cable > wireless.
liqn7 said:
One thing to factor in mind is the slow charging rates with wireless charging.
Click to expand...
Click to collapse
I pretty much use wireless charging exclusively with my Nexus 4 and I have never had a problem with it.
Thanks for the reply though!!
David
Hey guys! Bought the official samsung charging pad today, for novelty factor more so then anything else if im honest! It was €55 to buy online here in Ireland (which is crazy money) but i got it along with a case for only €40 as part of a deal so i thought why the hell not. It came without a cable so naturally i assume i must use the fast charge cable with it? Here are a few questions i have.........
If using the fast charging cable with it , does that mean i will be getting fast charging capabilities from it? (iam assuming not)
If its generally not a good idea to use fast charge plugged in over night then does this apply to the wireless pad in conjunction with the fast charger?
And lastly. Can i run the cable from the usb port on my computer or does it have to be plugged in to a socket when using the wireless pad? The answers may seem obvious but just asking none the less! Not taking any chances with this baby ha
I have four of them. Two of the small rectangular ones from last year, and two of the newer round ones from this year, so I'll take a stab at your questions.
If using the fast charging cable with it , does that mean i will be getting fast charging capabilities from it? (iam assuming not)
I have not seen, nor did I expect to see, any difference using a fast-charger vs. standard. As such, I only use standard charger adapters for wireless duty.
If its generally not a good idea to use fast charge plugged in over night then does this apply to the wireless pad in conjunction with the fast charger?
My S6 Edge stops charging while on either version of the wireless charging pad, once it reaches 100%. The light on the (newer, round) pad goes from blue to green once it has reached this point.
And lastly. Can i run the cable from the usb port on my computer or does it have to be plugged in to a socket when using the wireless pad? The answers may seem obvious but just asking none the less! Not taking any chances with this baby ha
Unless your PC can source 2A from the USB port, then, no, you cannot use your PC USB port to power the wireless charging pad.
Any idea where i could get a longer geniune samsung charging cable so? I bought the wireless pad for use at a desk but the cable on the fast charger is too small to reach from the socket to the desk! I would need the cable to be at least another foot or two longer
Questions belong in Q&A, not General.
Thank you.
I have a question I'd like to add!
I've never used wireless charging before, can you use it on the s6 edge with a case on the phone? Does this impede the wireless charging? Thanks!
jkt97401 said:
I have a question I'd like to add!
I've never used wireless charging before, can you use it on the s6 edge with a case on the phone? Does this impede the wireless charging? Thanks!
Click to expand...
Click to collapse
Impede? Yes.
Any distance between the surface of the charging-pad and the back of your phone will impact the wireless inductive charging. The less, the better.
Also, obviously, any case that includes conductive materials will be a non-starter.
That said, my Speck case and my wife's (brand unknown at this moment) case work satisfactorily with both the Samsung round and rectangular charging pads. I have read that there are people that have had poor wireless charging experiences with some (probably thicker, more rugged) cases.
Searching should find the specifics.
So I've been able to test out this nice USB car charger from Choetech Official with Qualcomm 2.0 charging capabilities. And I must say this lil thing works very well. Charged my Nexus 6 up from 15% to 73% around 45min. It's a well built charger that has smart technology for recognizing what kinda devices you have plugged in.
Has a dimmed LED that changes from blue to green when you plug up a fast charge device.
It's a dual USB port charger.
Input: 12-24V
Output 1: 5V 2.4A
Output 2: 5v 2.1A/9V 1.7A/12V 1.3A
I really like this unit. Works better then the crappy one i used to own by Qmadix. That one always seem to stop working after 2 weeks of use.
[Quick Charge 2.0 Car Charger]CHOE 30W (with Most Powerful QC 2.0 Port) Dual USB Car Charger with Micro USB Cable(White) https://www.amazon.com/dp/B00YX7Y3G8/ref=cm_sw_r_other_awd_GxKlwbPTT27F2
PS. the Choetech C0046 does come with nicely built 3ft USB cable.
I received this charger couple weeks ago and have been using it. The charger arrives in a nice package with the standard accessories. Inside it has the charger, the usb cable, instructions manual, and a pamphlet that ask if you're happy with the product or not. Pretty standard nowadays. I got the black charger but they also offer it in white. The charger is shorter than my other ones which is a plus for me. I don't like them to stick out of my car port since it's really close to my shift knob. The charger comes with two usb ports. 1 is for quick charge 2.0 for some phones like my galaxy note 5. The other is a normal port that charges pretty fast too, up to 2.4 amps. You can use either ports to charge your devices and they will charge to the max allowed but if you have a quick charge 2.0 enabled device, it's best to use that port. They colored the port blue for fast recognition which is nice. I don't have to fiddle around with it while I'm driving to figure out which port it is. The quick charge can charge my phone from 50% to close to full in about 45 mins. It takes longer if the phone is being used. I use the charger daily during my drive to school. I always charge it up to 100% before I head to class so it can last me all day. I was worried that by using quick charge so often, it would deteriorate my battery life but I haven't experienced that yet and hope I never do. When I use the charger to charge 2 devices, they both charge at their max. My phone charges with the quick charge while the other phone charges with the other port and it doesn't affect each other, which is very good. I really love this charger. If Iphones had quick charge, I would buy this charger for everyone in my family.
Choetech also was nice enough to allow me to test one of these charger for them.
I found it to be an excellent charger.
I have copied my review from amazon here for the fine folks here at XDA.
I will try to answer any questions you may have, just post up a reply or send me a PM.
--------------------------------------------------------------------------------------------------------------------------------------
This is a great little charger, and I do mean little.
The size actually surprised me a bit considering this is a 4 port charger.
I expected this to be a huge block sticking up from my 12v car port, but it actually is a nice small charger.
I have 2 port chargers that are bigger than this is, enough about that, on to the review.
Looking in the package you will find:
The Choetech 4 port Quick Charge 2.0 certified charger
3' USB cable
Instruction manual
The USB cable is one of the best ones I have received with a charger in a while.
It is not thin and flimsy like you usually get.
The charger itself is made of a nice gloss black plastic and looks and feels like it will hold up well to years of abuse in your vehicle.
This charger does support Qualcom Quick Charge 2.0, meaning that it will auto adjust voltages and amperage to best charge you compatible device as quick as possible.
In testing I found this charger to be able to charge my LG G4 and Samsung Galaxy Note 5 in about the same time as my other Quick Charge 2.0 certified wall chargers.
This will also charger non Quick Charge 2.0 certified devices at the maximum rate they will allow.
I tested my LG G3 that is not Quick Charge 2.0 certified and will max out at 2.1a charge rate.
It got 2.0a charge rate from this charger which is great.
There is also a blue LED on this to help you find it easier in the dark.
The LED itself is dim as to not be distracting,
I have attached some pictures showing how small this charger is and me using it to charge multiple devices including 2 phones and a GPS unit.
I have had zero problems with this unit and am glad to have it.
I would recommend this to anyone with a car or truck and either multiple devices they need to use daily or a device that is Qualcom Quick Charge 2.0 certified.
If this review has helped you at all, please click thanks below to let me know.
I received this at a discount in exchange for an honest review, this does not change my opinion of the product in any way.
Hey guys,
I got to use this charger too. Having 4 ports, one with quick charge was really handy. I was able to charge my Nexus 6, Nexus 9 tablet, and an iPhone 5S all from the same charger without having any drop off in charge rate from any of the devices I could measure with Ampere (Nexus 6 & 9). Overall, there isn't much more to say that the other guys above didn't say.
Other thoughts:
It's really small. This thing packs a lot of power for its size.
It is scratch and finger print prone, but I plan on leaving this in the car all the time; so that doesn't really affect me.
The charging light changes color based upon normal charging (Blue) versus quick charging (Green)
NOTE: I was given a discounted product in return for an honest review. All opinions and statements are my own
I grabbed the 2-port charger at 10 bucks a couple of weeks ago at Android Police.
I wonder why there aren't dual QC 2.0 ones out there.
hiteshonline said:
I grabbed the 2-port charger at 10 bucks a couple of weeks ago at Android Police.
I wonder why there aren't dual QC 2.0 ones out there.
Click to expand...
Click to collapse
probably grabs too much power and the design to make that might be too complicated without having some power fall off? Personally, my phone is the only QC device i'd worry about and the rest could take the slower charging. But that's my 2 cents.
I have this charger, too, along with a number of other CHOETECH products. Their quality is top notch with affordable pricing!
I have this charger in white so it sticks out surrounded by all the black leather in my car, but that makes it easy to spot and I keep the white charging cable in the quick charge slot so I know which to use when my phone is low. It doesn't seem to charge fast while the phone is in use, but it does charge quickly if you just leave your phone idle and let the charger work its magic.
Even you didn't have a quick charge device, it's handy to have a two port charger. I'm happy with that product.
Sent from my LG-H811 using Tapatalk
I'm looking for an aftermarket charging dock similar to the Samsung but without the ridiculous price tag. Does anyone have any advice? I also was thinking of an idea for a charging adapter that I think should either exist already or be easy to make from existing designs.
I want to wirelessly charge my phone when in my car by simply dropping it into my cupholder in the center console. I was thinking, if there was a way to take an existing wireless Fast Charge adapter, and turning it into a ring or band (similar in size and shape to a Slap Bracelet). It would only need to be inserted into the cupholder, expand to the shape of the round opening, and when you drop your phone into the cupholder, it would begin to charge. If this product doesn't exist, is there a way to make it with current products already on the market?
I'm interested in something similar to this. My car has a little cubby that my phone fits in perfectly and I'd like to install a wireless charger directly under the panel that my phone sits on. My concern is the difference between AC and DC current which could be avoided by using an actual car wireless charger but I'm also skeptical about most of the wireless chargers out there.
The high power ones have fans. Under the cubby might not be enough air circulation to keep it cool, and could cause it to overheat or even catch fire. I'd avoid that.
I just bought a 3A charger from Amazon. http://www.amazon.com/Charge-Anker-...&redirect=true&ref_=oh_aui_detailpage_o00_s00 Look for Quick Charge 3.0 and make sure and get a compatable cable.