Related
Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
So, let's go, let me help you mate...
1 - turn off your phone;
2 - press and hold every single physical button together (power, Vol+, Vol-)
3 - You will see a recovery screen (like an DOS on computer)
4 - Pressing Vol- you change the options, Vol+ you select any option there
5 - Enter the option: AP Fastboot
6 - Download the program called RSDLite
7 - Download a full official retail JB rom
8 - Install this rom using RSDLite
9 - After you pass whole process succesfully, your phone is ready to be used again.
Remember: CHARGE your phone to 100%, because the process is slow and your battery will drain fast, so have sure you did a long charge before installing the rom again.
I was direct on the answer...if you have any doubt...so ask...
ayeros said:
Hi first sorry for my bad english but i will do my best.
So heres the story, i tried to root my GF phone in order to install CM 10.2, i was able to install safestrap but i deleted something and now the phone dont even power one. I mean when i do any combinaison of Power + Volume up or down or even Power + volume up and down at the same time nothing hapen, No motorola logo, nothing append.
But i saw something, when the phone is plugged in usb and i try to boot it with volume down + power i saw an: OMAP thing in device manager... but ... it appear, disapear like 20 time in row and stop to appear after 2 minute i mean my comp detect, delete, detect, delete if you know whats i mean
The phone is a Rogers XT910 GSM phone it was working number one prior flashing but now it dont power on. Any idea ? i searched a lot on xda, tried almost anything, but nothing work.
I flash phone on a daily basis but never flashed a motorola phone before
Click to expand...
Click to collapse
I tryed all of those before but dont have any display at all ;\ i mean really nothing not even text on screen
Anyone ?
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
medja77 said:
hi everyone happy new year. pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/lg-g5
With that stated...
Your best bet is probably to take a look at the following thread and, if needed, post your question within that thread.
https://forum.xda-developers.com/showthread.php?t=3350648
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
medja77 said:
hi everyone happy new year
pleaaaaaase i need your help. i flashed my lg ls992 rom, but when the flash ends, normally the device rebooting but my device is going off and still of, i press power button but it's still of, trying to enter to recovery mode it's the same, connect the phone to charge but nothing change it stills off and don't charge, but when i connect it to pc , it's recognized the mobile driver but the charging signal don't appears.
i tried several thing like inplug the batterie and press 30 seconds on power button.. but nothing new, no flash program recognized my device
please help me 3 days of trying and trying but not result
Click to expand...
Click to collapse
Sorry to hear this...
Have you the Fastboot access? How to Check:
1) Remove Battery and put it back
2) Press and hold Volume - (Volume down) and connect via USB to your PC
3) The Phone Screen should change now and you can read something about Fastboot Mode
OR
Can you set your Phone into Firmware Download Mode?
1) Remove Battery and put it back.
2) Press and hold Volume + (Volume up) and connect via USB to your PC
3) The Phone goes normaly into Download-Mode now, see it on Phone Screen
4) Open LG Bridge and go to Update and then in the Bottom right Hand side onto >Correct Update Errors< this will flash your Phone with the Stock Rom
Working for you?
Dear Sir/Mdm,
This is Linn Myanmar and I am from Myanmar, Stayed in Singapore, working as an engineer.
I just bought my phone (Elephone S8) one week before and I tired rooting with tutorials from XDA forum (using flash tool, driver).
Yes, the phone has been rooted properly as root checker said and I tried installing Updated SuperSU from setting>About Phone>System Update>Local Updates>Updated SuperSU.zip.
After that the phone has rebooting with logo and never show any result and the phone just happened the screen on and off repeatedly until now.
So that please help me how to solve this and get back to its normal operation. I've tried long pressing on power button, long pressing on power button+volume up button, long pressing on power button+volume up button+volume down button quite many time, but those doesn't work and the phone hasn't come back it's normal operation.
Help me please.
With Best Regards,
Linn Myanmar
Linn Myanmar said:
Dear Sir/Mdm,
This is Linn Myanmar and I am from Myanmar, Stayed in Singapore, working as an engineer.
I just bought my phone (Elephone S8) one week before and I tired rooting with tutorials from XDA forum (using flash tool, driver).
Yes, the phone has been rooted properly as root checker said and I tried installing Updated SuperSU from setting>About Phone>System Update>Local Updates>Updated SuperSU.zip.
After that the phone has rebooting with logo and never show any result and the phone just happened the screen on and off repeatedly until now.
So that please help me how to solve this and get back to its normal operation. I've tried long pressing on power button, long pressing on power button+volume up button, long pressing on power button+volume up button+volume down button quite many time, but those doesn't work and the phone hasn't come back it's normal operation.
Help me please.
With Best Regards,
Linn Myanmar
Click to expand...
Click to collapse
Hi Linn
How did you solve your problem?
Hi have exactly the same problem at this moment and, as you, I tried everything (except the hammer but it was close...)
Really need a solution for this!
I like the phone but this way I have to buy another one and other brand for sure...
Thanks (from Portugal)
I suppose you both solved this, one war or other, but maybe someone else looks for a solution to this.
As the S8 is a MTK-phone, it's never really "dead" until it's defective. You can always revive it. So stay cool.
All you need is a Windows-PC with working VCOM-drivers, the SP-Flash-Tool and a ROM. You can get all that on www.elephone.hk/downloads (at least until today... if it's no longer there, you need to google for all that).
The problem is to shut the phone off.
Of course you can just let it boot-loop until the battery is empty, if you can take the time.
Otherwise there's no simple and foolproof way to shut it off if it's in loop.
Try everything you can imagine with the three buttons. Especially pressing the power-button for "ages". Try pressing any volume-button simultaneously, too. I had my S8 bricked to bootloop several times yesterday and today, while fiddling around with all ROMs I could find.
Sooner or later I got the phone to shut off. I somehow got it into the testing-menu, too, which is yellow and chinese and which won't help you.
I even somehow managed to boot into recovery several times, which offers "shutdown"-option. I have the impression that the S8 enters recovery eventually when it fails to boot often enough, but that's just a guess.
Anyway, once the phone is off, you have won.
Start the SP-Flash-Tool, load the scatter-file from your desired ROM (which is probably 20171018), unplug the phone, press "download", and then plug the phone to USB. You might have to press vol+ oder vol- while plugging it in, but if it's recognized, the SP Flash Tool will start flashing the ROM and your phone is up and running again.
Problem solved
I think this is too complex anyway.
The battery was empty after some days.
It was too bad lose so many information but I had to live with that.
So, finally the hammer solve the problem in less then a second...
Thank you very much. Is nice to know there are people helping to solve some problems.
Amorinix
Please also find all required files for rooting the Elephone S8 at:
https://www.mediafire.com/file/k1ldc..._root.rar/file
I hope this helps.
To turn phone off, hold all 3 buttons for about 15 seconds the phone will look like it's powering down but then restart after about 2 seconds just KEEP holding all 3 buttons and it will power off properly. In other words hold all 3 buttons for about 45 secs to power down if in a boot loop. Once powered down hold volume down whilst plugging into USB to flash.
Guys I need help ...this morning my phone restarted while charging and got stuck on huawei logo screen. i tried different combinations of Power + Volume up and down buttons but it didnt go to any other screen. then i installed hisuite on my PC and connected to my phone through USB cable, and holding volume down button i got to this screen which says FAST BOOT&RESCUE MODE and further reads "Phone Locked" "FRP Lock" in the end below Android logo.
i want to access my phone contents and get backup as I have important files to recover. Please I need some help with detailed step by step procedure to help me get through without damaging my phone or its content. I am hoping some nice techie can write me the steps needed to be taken considering I am a complete noob.
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Zep0th said:
Try forcing your way into the recovery and clearing cache
Vol up + power without having it plugged in
Just keep it pressed for 1 min + if you have to until you see the recovery
When the phone vibrates and turns on let go of the power button so it won't cycle
Click to expand...
Click to collapse
hi buddy,
i tried but no luck
Any news? I got one in the same condition. When its in eRecovery and i try to update it shows "can't get update info(or something like that)", it doesn't have factory reset button available, it doesn't have wipe button available. When I put it in fastboot, it shows Phone "Locked" and "FRP Lock".
Wtf do I do with this brick?
Thank you in advance! ( Be aware guys! I was scammed with it on the internet - full box, like new, and it doesn't even get into android)
Hi mate
Did you solve this in the end?
John Smith234 said:
Hi mate
Did you solve this in the end?
Click to expand...
Click to collapse
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
ahmowais said:
i want to access my phone contents and get backup as I have important files to recover.
Click to expand...
Click to collapse
Hi,
have you tried Emergency Backup?
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...
ahmowais said:
no mate ... the phone is not usable anymore as i couldn't get it fixed from anywhere nor found any solution online
Click to expand...
Click to collapse
That sucks, I think I got exactly the same problem, have tried all kind of combinations. Only different appearing window is fastboot but that is totally useless as the device doesnt appear on Hisuite either. What happens when the batter totally drains ?
---------- Post added at 04:29 PM ---------- Previous post was at 04:26 PM ----------
- Turn off your phone and connect it to your computer using USB cable. Press and hold the Volume Up and Power Button for 15 seconds, until the device restarts and enters the eRecovery mode. Select "Emergency backup" . Works on EMUI 9.1 only!
IMO theres no other way to save your data...[/QUOTE]
Phone does not turn off, and whatever button you press it just keeps showing Huawei start screen except for volume down and power button combination which opens fast boot window. Do you how to connect the device to laptop while in fastboot mode? We have tried fastboot commands on terminal but didnt get anywhere with file recovery...
so no solution?
U can do it, but u need dissasembly the phone, to make test point, if phone isn't hw damaged yes u can fix it in that way
hi may I ask if you have resolved the problem? Been experiencing the same problem when my huawei p20 lite got stuck on a startup logo screen
same problem with me, phone is stuck on start up logo, not moving anywhere despite using all the tricks, any solutions, anyone have?
Hi, I have same problem. Stuck on HUAWEI logo and power off do restart.
Phone is with last stock FW, FRP and BOOTL. locked. I tried update from SD card, but no succes. All buttons combinations not working except fastboot. But in fastboot, there is no possibility to do something due to locked btldr.
But I have one advantage, I have same phone model with same firmware working. Is there any possibility to recover bad piece?
*bump*
anyone who fixed this ?
Hello,
I'm going on again on my WP15 which is on bootloop after trying to put an magisk patched rom to obtain root.
The objective now is just to put a official factory rom (which I downloaded from the official website for the right model)
The problem now is not how to do that but how I can connect the phone to the computer because :
Assuming that the phone is connected via usb-c to the computer on usb-a and the phone is on.
1 The screen is black
2 windows connect sound
2.1 Com port connected (device manager)
X wait 1s
3 windows disconnect sound
3.1 com port disconnected (device manager)
2&3 x2
4 Screen on : On screen :5G oukitel logo + android logo + Orange state; devive unlocked[...] not trusted[...]; device will boot on 5s
repeat 1 indefinitely
Please Note :
That I do not have ADB access since I switched from w10 to 11 so the rsa keys are not valid.
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
The phone is only off when out of battery, As soon as I connect a cable the phone turn on and I can do nothing except disconnect cable and wait (Can be very long with an 15000 mAh battery...)
There is absolutely no custom bootloader so no twrp or any custom recovery/installation bootloader.
With that... I think it's definitely bricked... I'm already thinking of soldering a new rom (or asking someone to do for me)
If you need more details or precisions tell me !
Thank you in advance !
Lunalunea said:
The phone is stuck but when I say stuck, it's completely because button vol- + power = nothing, constant bootlooping and vol+ + power = the same schema (1,2,3,4) except that there is no wait time between 2 and 3, it's instant.
Click to expand...
Click to collapse
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
vxsw said:
seems you missed the most important thing what I've said - ignore any phone activity, just hold.
use this for flashing https://spflashtools.com/windows/sp-flash-tool-v5-2208 I've used 5.2134, lower versions not support mtk6833. and do not use 6.+ versions.
again:
- install mtk usb-com drivers (by manual of flashtool if you did not do it yet)
- check at firts only boot.img and vbmeta.img (do not use "format" only "download")
- power off phone (if you can't, plug your phone in pc and click "download", it'll throw error with suggestion to disconnect battery, but phone would power off. if this didn't help, then just skip this point and try to continue anyway)
- unplug your phone
- click "download" button (yes while your phone unplugged)
- on unplugged phone, hold both volume buttons and hold power button too (three buttons at once).
- hold it all >15 seconds (20 for sure) and ignore any phone activity, just hold.
- release power button only (keep holding both volumes)
- plug your phone (still keep holding both volumes)
- now flashing process must start and you may release any buttons.
Click to expand...
Click to collapse
Hello,
Sorry, I was not very active since this post and I abandoned for a very long time.
But ! Your instructions was good and I finally got my phone back to life !
Since then I realized that the Oukitel brand is very sketchy about theirs ROMs on the Oukitel website because the WP15 model is associated with the WP13 ROM on the download center so... WHY ? this is so confusing because now I have a WP15 advertised ROM (From a website... Yes... I know I was dumb to do that) and it's working yes... but this is very buggy for example the gyroscope is crazy or my MAC address is never the same even if I turn the built-in MAC address spoofing option off...
I will do some research just to get my phone as normal by doing it as clean as possible because I know now what is implying for doing that.
Thank you so much for your patience and especially for your guide and I apologize for my dumbness.
Lunalunea said:
the WP15 model is associated with the WP13 ROM on the download center
Click to expand...
Click to collapse
have no idea what are you talking about.
just checked in dl center on oukitel official site and seems all is ok. wp15 have it's own fw page and redirect to correct dl fw page, wp13 have it's own.
you can't mix up fw, in case wp13 signed exactly as wp13:
v318a-oq-s88-128g8g-bom2-hdp-r0-cts-eu_OUKITEL_WP13_EEA_V12_20210731_user_20210731.tar .gz
wp15 have no direct sign, but it have a cpu defenition:
TF919_OQ_S89_6833_R0_EEA_V1.9.7.2_S211014 .zip
i.e. mt6833 aka dimensity 700. wp 13 have a dimensity 800 aka mt6873
nb, in dl center, fw tool seems not works properly, so you must use a flashtool as I'd referred before.
I've tried everything, for 5 full days, then had no option left but to give up. Sorry.