Related
Hi all:
Does anyone have any suggestions for good screen protectors for the Tilt2 off of Ebay?
I know there are a number of name brand ones which are good, but I have an Ebay gift certificate, so I'd like to buy from there if possible. I can't seem to find any of the good name brand ones on ebay, so I was hoping someone may have tried one of the ones that are available on there.
Suggestions would really be appreciated.
Thanks!
PS: I am currently using the one that came with the phone, and I was happy with its quality, but it has gotten quite scratched up, quickly, so I need to replace it.
http://cgi.ebay.com/2-PACK-LCD-SCREEN-PROTECTOR-FOR-TMOBILE-HTC-TOUCH-PRO-2_W0QQitemZ280435833291QQcmdZViewItemQQptZPDA_Accessories?hash=item414b4739cb
Extremely easy to apply, barely any bubbles/air pockets to be seen. My screen looks like it doesn't even have one on.
Or you could try this link. I ordered mine, but I didn't received them yet so I don't have pictures to upload, but they look sharp
http://cgi.ebay.com/2-MIRROR-Screen...UK_Mobiles_Accessories_RL?hash=item19b63cfef6
I've always ordered screen protectors from Clarivue. The one I put on my Palm TX 4 years ago is still on it. They're durable.
As to ebay, the seller I've always used for clarivues is JHongs. They currently don't have protectors for the Tilt 2 listed, but the last time I asked them to list one they didn't have up, they happily did so.
Just message them, give them the link to the Tilt 2 clarivue (linked above), tell them you're ready to buy, you heard they would list it for you, and I'll betcha in 48 hrs your new screen protector will be on the way.
I bought ebay item #250541670275. It only cost $2.98, it shipped from California, and I had it within a week. They fit the tilt 2 VERY nicely, and I can't tell there's anything on the screen. Buy it!
Thanks so much to everyone who replied!
I will definitely be ordering one of the ones suggested in this thread.
Thanks again!!
Thanks so much to everyone who replied!
I will definitely be ordering one of the ones suggested in this thread.
Thanks again!!
Is the one that comes with the phone any good?
stab244 said:
Is the one that comes with the phone any good?
Click to expand...
Click to collapse
I wouldn't call it bad, but in terms of durability it's lacking compared to clarivue or boxwave or some other name brands.
im To late
but your best bet would have been zagg. most of those cheap plasic one's only hold up for about 3 month or so. zagg hold up until u decide to take it off.
www.zaggs.com that the main site and there should be some on ebay also. i kno that you have a gift card.
TEE82 said:
http://cgi.ebay.com/2-PACK-LCD-SCREEN-PROTECTOR-FOR-TMOBILE-HTC-TOUCH-PRO-2_W0QQitemZ280435833291QQcmdZViewItemQQptZPDA_Accessories?hash=item414b4739cb
Extremely easy to apply, barely any bubbles/air pockets to be seen. My screen looks like it doesn't even have one on.
Click to expand...
Click to collapse
Don't get this if you have a Tilt2. Just thought i'd give you a heads-up (it'sthe T-Mobile version).
If you still haven't purchased any scrren protector, you must have a look at this, although it's not on ebay it's very cheap and offers full body protection.
http://www.gadgetshieldz.com/att-ti...nvisible-shields-screen-protectors-skins.html
If it's not cheap enough use 20% discount cupone PPCSG20
I have excellent experience ordering from Amazon and HIGHLY recommending this seller - Eforcity. (I've ordered 3 protectors for my CDMA and got 8 in the package - someone was pissed to my bennefit )
Anyone using the anti-glare protector? Does it really reduce fingerprints like they are saying?
http://cgi.ebay.com/Anti-Glare-Scre...wItemQQptZPDA_Accessories?hash=item2a03b0c3b6
jmmmmm said:
Anyone using the anti-glare protector? Does it really reduce fingerprints like they are saying?
http://cgi.ebay.com/Anti-Glare-Scre...wItemQQptZPDA_Accessories?hash=item2a03b0c3b6
Click to expand...
Click to collapse
They say "scratch proof", but 3 of mine scratched.
Also, those "invisible shield" ones leave weird residue that does go away after a while, but it gets annoying.
After trying 3 types of screen protectors, I would HIGHLY suggest the regular scratch proof ones. They really work and the bubbles went away after a night of having it on.
jmmmmm said:
Anyone using the anti-glare protector? Does it really reduce fingerprints like they are saying?
http://cgi.ebay.com/Anti-Glare-Scre...wItemQQptZPDA_Accessories?hash=item2a03b0c3b6
Click to expand...
Click to collapse
Generally an anti-glare protector has a matte finish and generally the crystal clear ones are glossy. That's the distinction that matters in regards to fingerprints -- any glossy surface is going to be print-astic and hold on to finger oils with the jaws of life.
I have a clarivue anti-glare, and it is definitely more resistant to prints than the stock HTC protector was. But it's not magic, or even oleophobic, it's just an ordinary matte surface.
I also recommend a decent brand like boxwave or clarivue above some no-name protector if you want to be sure it's going to be durable. I used the same clarivue for 4 years on my palm TX and it was in a 100x better shape than the stock HTC protector was after a couple of weeks.
So like me i am sure you all went thru a lot of glass and plastic screen protectors for your galaxy S7 and nothing fits right or feels same.
Here is a new one by CORAL
https://www.youtube.com/watch?v=qL-9u0dnzuk
Here is a video review by our own ebpman
https://www.youtube.com/watch?v=Q6Fzelt0l9s.
Mod edit: Commercial links removed.
Hopefully i was able to help you all out!
EDIT UPDATE:
Review for the Coral Tempered Glass
#1 Looks 8/10- It dosent look exactly like the phone, so its like putting a case for the front as well. However dont get me wrong it does look very good so i will give it an 8 since it does not preserve the samsung color all the way but it comes very close.
#2 Design: Idk how i can rate this one. It is shaped just like the phone screen so thumbs up i guess.
#3 Functionality: Flawless touch screen experience. This field will get 10/10
#4 Compatibility: Already tried it with other cases, about 5 of them (i work at Verizon) and it works well with all of them. I can see it being a problem with some off brand super tight cases though. I tested it with UAG, Incipio, Speck, Spigen, Case Mate.
#5 Protection: It makes my phone feel very secure and is a solid over all product. so this is one place it gets 10/10 for sure. It is 0.26 MM which is thinner than 0.33 MM regular glass we are used to but if the glass was any thicker i dont think the cases would fit it, so i do believe its the perfect thickness.
Overall its a 9 depending on how it does with my cases but i am sure it ill pass with flying colors.
Will do a more in depth review once i get back home from work tonight or tomm. Will post pictures
I am using it with an otter-box commuter right now and its working great. Also idk how many of you saw this but here is the video of our very own ebpman who did a review on one as well. https://www.youtube.com/watch?v=Q6Fzelt0l9s
Another review by @seoulbrova https://www.youtube.com/watch?v=70dP...ature=youtu.be
P.S: I have more cases coming in oblique and caseology and all so ill post how those work with this here.
These companies should probably have options where the samsung logo gets hidden.
peachpuff said:
These companies should probably have options where the samsung logo gets hidden.
Click to expand...
Click to collapse
would you really like that?? i kind prefer mine as if there is nothing on the screen to preserve the orignal look. But then i am also the person whos like BEFORE and is against the after
Ordered one, hope it's as nice as it looks.
Are there any distributors of Coral products in Canada? The shipping costs bring this to about $60 CDN, which seems a bit high for me. Also, is Coral associated with Leaf (perhaps owned by them)?
I wanted to order this, but even with the $5 off coupon, it adds up to $30+. They charge $4.50 for first class mail shipping, which is ridiculous. $32 for a screen protector is a bit rich.
Sir_Eagle said:
Ordered one, hope it's as nice as it looks.
Click to expand...
Click to collapse
Please let us know how it fits! It seems like all the manufacturers are having problems with those curved edges with not only tempered glass, but also PET. Those slightly curved edges are making it difficult to find any screen protector that is full screen and doesn't have edge lifting or issues with cases. This is the first company with a full screen tempered glass protector that actually has a video of it on the s7 and addresses those issues. Still, it will be good to hear from someone that has tested it first hand that isn't paid by the company.
xxaarraa said:
I wanted to order this, but even with the $5 off coupon, it adds up to $30+. They charge $4.50 for first class mail shipping, which is ridiculous. $32 for a screen protector is a bit rich.
Click to expand...
Click to collapse
Is it ? everytime i ship something using first class mail it always ends up being over $5 honestly i cant comment on the weight as idk if i have ever shipped anything which weighs like a tempered glass but oh well i wont complain if it works properly, otherwise back it goes lol.
Whats with colored screen protectors this time around?
Are they trying to hide the rainbow effect?
I can confirm that this tempered glass protector would fit as advertised because i bought the plastic ones and they fit perfectly. Heres the link. I purchased one and should arrive in a week. http://www.ebay.com.au/itm/17175543...49&var=470968620531&ssPageName=STRK:MEBIDX:IT
Just bought the gold, will update on how it looks.
Leeum said:
I can confirm that this tempered glass protector would fit as advertised because i bought the plastic ones and they fit perfectly. Heres the link. I purchased one and should arrive in a week.
Click to expand...
Click to collapse
Interesting, is that a knockoff Zagg? Not that the brand matters. As long as it fits, protects the screen and doesn't interfere with the touch sensititivy, I don't care about the brand. Maybe mfg finally figured out how to make these for the curved glass. However, the title states for Samsung Galaxy S6 S7 and I've seen plenty on Amazon that state full coverage for Galaxy S7. Then based on reviews, it seems they just rebranded an S6 protector. It does state beneath the title, [tested on Galaxy S7], and also gives the option to select S6 or S7. I hope it fits! If so, it means that there will be a lot more of these available and prices will come down. If you bought the PET one, did you notice any edge lifting?
@ -Gir-, in the video it actually shows the rainbow effect, so no, I don't think that's it. Maybe it helps with aligning it? I don't know, and it does seem sort of unnecessary. The one in the ebay link also has colored borders.
Dam, no getting these in the UK? I checked the site and they only ship to the states.
poopooplatter said:
Interesting, is that a knockoff Zagg? Not that the brand matters. As long as it fits, protects the screen and doesn't interfere with the touch sensititivy, I don't care about the brand. Maybe mfg finally figured out how to make these for the curved glass. However, the title states for Samsung Galaxy S6 S7 and I've seen plenty on Amazon that state full coverage for Galaxy S7. Then based on reviews, it seems they just rebranded an S6 protector. It does state beneath the title, [tested on Galaxy S7], and also gives the option to select S6 or S7. I hope it fits! If so, it means that there will be a lot more of these available and prices will come down. If you bought the PET one, did you notice any edge lifting?
@ -Gir-, in the video it actually shows the rainbow effect, so no, I don't think that's it. Maybe it helps with aligning it? I don't know, and it does seem sort of unnecessary. The one in the ebay link also has colored borders.
Click to expand...
Click to collapse
I am waiting on the glass one to arrive. I bought a 3 pack of the plastic ones and stuffed one of them up but second one fit on perfectly. Using a Spigen case and no screen lifting. Touch sensitivity is smooth as it is off. No problems at all
I got my onyx s7 yesterday, 1st day out of the house. Rocking a spigen case (need to change the case, rear is clear plastic and very slippy) add to that the screen is naked, im scare of breaking it.
Ive akways had tempered glass on my s5 and had no issues. ordered the crystal spigen but desperate for a tempered glass one in the uk
will wait for a price drop, they sell other items on amazon for much less. obviously this will be higher than most but hoping a small drop will happen soon
keep us posted on field tests
Leeum said:
I can confirm that this tempered glass protector would fit as advertised because i bought the plastic ones and they fit perfectly. Heres the link. I purchased one and should arrive in a week. http://www.ebay.com.au/itm/17175543...49&var=470968620531&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Looks like that one only ships in Australia, which is shame for me here in Canada. The price seems much better than the one from Coral, but maybe there is a quality difference. If I was in Oz I would likely order this one and try it out. The price of the Coral one is too high for me to order it right now.
Obsidian Octagon said:
Looks like that one only ships in Australia, which is shame for me here in Canada. The price seems much better than the one from Coral, but maybe there is a quality difference. If I was in Oz I would likely order this one and try it out. The price of the Coral one is too high for me to order it right now.
Click to expand...
Click to collapse
Yeah there is this one also. http://www.ebay.com.au/itm/18180932...49&var=483012366865&ssPageName=STRK:MEBIDX:IT
Leeum said:
Yeah there is this one also. http://www.ebay.com.au/itm/18180932...49&var=483012366865&ssPageName=STRK:MEBIDX:IT
Click to expand...
Click to collapse
Thanks, but looks like that one also only ships within Oz. I decided to order this one: https://www.amazon.ca/Galaxy-Protec...458707412&sr=8-8&keywords=screen+protector+s7
I'll report back once I get it and (try to) install it.
Obsidian Octagon said:
Thanks, but looks like that one also only ships within Oz. I decided to order this one:
I'll report back once I get it and (try to) install it.
Click to expand...
Click to collapse
Hope that Jetech works for you! Just checked again on Amazon and it looks like there are quite a few options now with the same description as the Coral one; namely 9H hardness, oleophobic coated and full coverage (Sorry, can't add urls, newbie poster, long time browser). Also, all seem to have the colored borders. Prices seem to range from about $8.99-$29.99 (Checked Amazon UK and there seems to be a few on there too!). I have noticed that like the Jetech, most of these state the thickness is 0.3 mm, which one reviewer stated made pressing the home button difficult for his fat fingers. Curious to know if anybody else has had that issue before. It seems this is a common thickness for the tempered glass. My last one had a gap under the home button so it wasn't an issue.
@ Leeum, thanks for the update on the fit of the plastic ones. Good to know you didn't have issues with edge lift with the Spigen case.
@ StickyGeko, I had the same case and almost dropped it first day! Immediately ordered another case and only kept that one on there long enough for the new one to arrive. Ended up going with the Spigen Slim Armor. Still a bit smooth for my liking, but it seems to have just a bit more padding.
Well I have been struggling to find a decent screen protector untill now.
Online there were alot of terrible reviews on most protectors due to the protectors not sticking. They lift after a few days, reduce the touch sensitivity. The good ones have a sort of dot matrix you can see when the screen is tilted certain ways. So I thought I'd order the genuine Samsung ones I thought hey who better than the manufacture.
I wasn't holding up much hope but I was pleasantly surprised. It isn't a glass protector and it isn't quite the film protectors. It's a little thicker the clarity is crystal clear and the feel is nice. It works with certain cases but not huge bulky ones. I tend to use a case for work and I have a skin on the rear of the phone to stop scratches and a screen protector on the front. Touch wood I haven't broken a phone yet. I want it looking nice and shiny after a year so not to bothered hiding it with a skin.
I will update this review in 7 days after using it in my day to day life. The protector has adhesive all over and is easy to fit as the outer protector has two alignment tabs to hold and a white line the matches perfectly to the bottom and top edges of where the screen starts so you can align perfectly.
I purchased mine in the UK for £14.99 you get 2 in the packaging which is pretty substanical so they shouldn't loss there shape when posting either.
Feel free to ask any questions
Happy reading and happy purchasing.
If you have this protector please write how your experience with it has been so far.
Just ordered these too as I found a very faint scratch on my screen.
Let me know how you get on mate.
Where are you finding samsung branded protectors? They aren't listed on the samsung website.
seawolf823 said:
Where are you finding samsung branded protectors? They aren't listed on the samsung website.
Click to expand...
Click to collapse
http://www.mobilefun.co.uk/official-samsung-galaxy-s8-plus-screen-protector-twin-pack-p63092.htm
This is where I purchased mine
orignall products..
Where we find orignal roduct of my cell phone everyone give me first copy
MopHeadGeek said:
http://www.mobilefun.co.uk/official-samsung-galaxy-s8-plus-screen-protector-twin-pack-p63092.htm
This is where I purchased mine
Click to expand...
Click to collapse
Please keep us posted on this thanks.
5 days later so far so good the screen protector also works with a tech 21 clear impact case! It hasn't lifted as of yet. Tiny bit of dust being collected by the very edges ever so slight other than that it's perfect.
I'm also wondering how it's doing. Does the protector cover right up to the edge where it meets with the medal? How's it feel...like olephobic coating and feeling smooth...not rubbery.
It is holding up perfect for my usage one issue which I caused I nicked the bottom of the protector which has caused it to tear ever so slightly my fault for taking it out of a case. It feels perfect for me you can tell it isn't the glass but it isn't a bad feel.
The dust collecting on the edges is seriously getting on my nerves. The ocd in me wants to rip the protector off and the other part of me can't stand the small faint marks I have on the screen.
Thank you thumbs up
MopHeadGeek said:
Well I have been struggling to find a decent screen protector untill now....
.
Click to expand...
Click to collapse
Hey man thanks, can I suggest that you edit first post so it's easier to track your review.
Also screen protector seemed to be an issue and seems like you found the solution so I'd make it sticky ?
Thanks again ordering
I bought the neo flex from spigen, im waiting for my tough armour case to arrive before i test it. I will keep a weekly report as well if you want so we can have all the information about screen protectors in one same spot
Jnioms said:
I bought the neo flex from spigen, im waiting for my tough armour case to arrive before i test it. I will keep a weekly report as well if you want so we can have all the information about screen protectors in one same spot
Click to expand...
Click to collapse
Make sure u trim the corners a little first before applying or it'll lift at some point on the corners I'd ur not perfectly straight with ur application. I took about 1-2mm off mine by following the contours of the corners. It's perfect now.
Despite Spigen advertising to apply it with the case on and that its "case friendly"... Its not perfect. By trimming it slightly before application you'll avoid it lifting.
Sent from my SM-G955F using Tapatalk
KennyLegend said:
Make sure u trim the corners a little first before applying or it'll lift at some point on the corners I'd ur not perfectly straight with ur application. I took about 1-2mm off mine by following the contours of the corners. It's perfect now.
Despite Spigen advertising to apply it with the case on and that its "case friendly"... Its not perfect. By trimming it slightly before application you'll avoid it lifting.
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
Thank you very much for the information! I will sure do
Off-topic: Im still waiting for my case to finally test the flex, tracking information says it's already in the country. Argentina's Custom is the worst thing ever...
This is PET or TPU? Anyone know?
Sent from my SM-G950F using Tapatalk
Screen Protector for Samsung S8
I saw a Screen Protector that is quite highly recommended. InvisShield Extreme Screen Protector for Samsung S8. It can be found here http://www.sgfreshidea.com/mobile-phone-beauty-news-singapore/samsung-s8-plus-invisshield-extreme-screen-protector-singapore.html
the official one was the best s***t that I bought in years... doens´t stick very well in the borders collecting all the lint...
sousa_2005 said:
the official one was the best s***t that I bought in years... doens´t stick very well in the borders collecting all the lint...
Click to expand...
Click to collapse
Agree I had mine since day one and it's perfect with every single case. And I test a few glass screen protectors without luck. As much as I like glass this oficial screen protector seems like a protector made by spigen because of his quality.
Anyone uses a bumper/case compatible with this screen protection ?
Anyone have suggestions or links?
Sent from my Pixel 2 XL using Tapatalk
Took a month or 2 to see kickstand cases show up on Ali and eBay when I purchased my M10 lcd.Waiting myself.
One of the official cases comes with a kickstand. I ordered one and should get it today. Not the best ever, but we don't have many options at the moment.
DavidMT909 said:
One of the official cases comes with a kickstand. I ordered one and should get it today. Not the best ever, but we don't have many options at the moment.
Click to expand...
Click to collapse
Hows the case? I'm looking to get one myself but not sure as there's not many cases with a kickstand. Things i wanna know is, is the silicone a finger print magnet and does it pick up lint easy
DavidMT909 said:
One of the official cases comes with a kickstand. I ordered one and should get it today. Not the best ever, but we don't have many options at the moment.
Click to expand...
Click to collapse
Thanks! Do you have a link?
Sent from my Pixel 2 XL using Tapatalk
jwoody86 said:
Thanks! Do you have a link?
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
https://liaow.com/huawei-mate-20-x-case-black.html
That is where I ordered mine. You can probably find it cheaper somewhere because that is expensive. I just wanted my pen, case and phone to come in one order. And not many places are selling cases yet, especially since I ordered it October 27th. I can't tell you anything personally yet because I had some issues with DHL and originally using a PO Box. They called me once, I gave them a physical address. The guy that was supposed to first deliver it didn't read the updated note and marked it not deliverable. I called, and the lady said she saw the note and said he must have read the original address and not checked the update. So after about two hours, I got a notification it was on hold. I called again and another guy told me she put the information in wrong, blah blah. So he told me it would be delivered Wednesday. I told them why does it have to be Wednesday now, why not Tuesday when I should have had it Monday. So he looked in his system and tried, and it is supposed to be delivered Tuesday with an URGENT tag. It's been a hassle, but should be worth it. Pictures of the case from online attached...
Here is a cheaper site...
https://www.giztop.com/accessories/official-protective-silicone-kickstand-full-case-for-huawei-mate-20-x.html
So I received my order. The case is very finger print resistant. It's made better than it looks in my opinion. The kickstand spring is snappier than you would think being so small. The kickstand snaps back into place with a magnet. The only part that worries me is the thin rubber piece between the charging port and screen. Hopefully that doesn't break too easily. The inside is like a velvet coating. The phone does come with a clear rubber case that feels tacky so it has good grip. It also comes with a plastic screen protector to start you off.
Edit... The phone also came with a screen protector already put on for me. Nice. They did a good job centering it too.
DavidMT909 said:
So I received my order. The case is very finger print resistant. It's made better than it looks in my opinion. The kickstand spring is snappier than you would think being so small. The kickstand snaps back into place with a magnet. The only part that worries me is the thin rubber piece between the charging port and screen. Hopefully that doesn't break too easily. The inside is like a velvet coating. The phone does come with a clear rubber case that feels tacky so it has good grip. It also comes with a plastic screen protector to start you off.
Edit... The phone also came with a screen protector already put on for me. Nice. They did a good job centering it too.
Click to expand...
Click to collapse
Nice! Can you take a few photos with the case on please? Did you get the AL00 or the L29?
GaryLe85 said:
Nice! Can you take a few photos with the case on please? Did you get the AL00 or the L29?
Click to expand...
Click to collapse
AL00...
DavidMT909 said:
AL00...
Click to expand...
Click to collapse
I really appreciate it thank you! ?
Now to order mine, btw hows the ? usability?
GaryLe85 said:
I really appreciate it thank you!
Now to order mine, btw hows the ? usability?
Click to expand...
Click to collapse
I haven't used the pen a lot yet. I'm still setting my phone up. I customize a lot and use widgets more than the average person. But from what I've used it seems okay. It has a different feel on the glass than Samsung's S-Pen. It's like smooth metal over glass is the best way to describe it. And it feels much better holding an actual pen over the toothpick sized S-Pen. The M-Pen has a charging port the same as the phone. It took me a day to notice it as I was messing with the phone more.
DavidMT909 said:
I haven't used the pen a lot yet. I'm still setting my phone up. I customize a lot and use widgets more than the average person. But from what I've used it seems okay. It has a different feel on the glass than Samsung's S-Pen. It's like smooth metal over glass is the best way to describe it. And it feels much better holding an actual pen over the toothpick sized S-Pen. The M-Pen has a charging port the same as the phone. It took me a day to notice it as I was messing with the phone more.
Click to expand...
Click to collapse
Thanks so much for all of the info and pics man!! Enjoy that beast!! Still waiting on my delivery!
Sent from my Pixel 2 XL using Tapatalk
Mate 20x kickstand
Hi for you guys who has bought the back case with kickstand. How was it? Worth it? It is true there is magnetic plate inside the cover so that it can stick to car magnetic mount?
mohdfahimap said:
Hi for you guys who has bought the back case with kickstand. How was it? Worth it? It is true there is magnetic plate inside the cover so that it can stick to car magnetic mount?
Click to expand...
Click to collapse
I think the kickstand is solid, more than it looks. The stand part is snappy, and yes it has a little magnet in it. I noticed it when I set it on my wash machine. I literally just went right now and tested it to give you a good idea, and it's strong enough to hold the phone against the side of the wash machine.
This looks good with both functions of kickstand and magnet. Though it will be shipped from China.
https://www.amazon.com/dp/B07KG4B9F...olid=3F77U6HF72DF9&psc=0&ref_=lv_ov_lig_dp_it
DavidMT909 said:
So I received my order. The case is very finger print resistant. It's made better than it looks in my opinion. The kickstand spring is snappier than you would think being so small. The kickstand snaps back into place with a magnet. The only part that worries me is the thin rubber piece between the charging port and screen. Hopefully that doesn't break too easily. The inside is like a velvet coating. The phone does come with a clear rubber case that feels tacky so it has good grip. It also comes with a plastic screen protector to start you off.
Edit... The phone also came with a screen protector already put on for me. Nice. They did a good job centering it too.
Click to expand...
Click to collapse
I have this same case it feels pretty good plus to me the kickstand gives the phone screen a good view when it's kicked out.
Finally received one of my cases I ordered from Ali. The redwood look one . Fits great and you can find the fps a lot easier than the OEM case. Still waiting for the kickstand cases to show upon Ali to order. I haven't seen anything yet
Here is another one I found:
For Huawei Mate 20 X Case for Huawei Mate 20X Cover Slim Robot Armor Kickstand Shockproof Rubber Case for Huawei Mate 20X Fundas
https://s.click.aliexpress.com/e/binPffDO
Kickstand and card holder
Do u guys have any link of case with kickstand and card holder ?
Im using note 9 and mate 20x but finding case for mate 20x same as one using for my note 9 ? Its very convenient when u wanna use card for cash out.
Unfortunately there not may choices for our beast mate 20x
If you have any cases you're interested in please let me know and if I have it I'll take pictures and give you a review of it. Reply to this thread with a ink of the product so I know which one you're talking about. I have pretty much purchased one of every case under $20 on both websites. Close to 100.
MyNarwhalBacon said:
If you have any cases you're interested in please let me know and if I have it I'll take pictures and give you a review of it. Reply to this thread with a ink of the product so I know which one you're talking about. I have pretty much purchased one of every case under $20 on both websites. Close to 100.
Click to expand...
Click to collapse
Do you have this one? It's cheap!
https://www.amazon.com/gp/product/B083LYJV6Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
cpufrost said:
Do you have this one? It's cheap!
https://www.amazon.com/gp/product/B083LYJV6Y/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
Sure do. This a generic case that is also sold on Aliexpress. It's not bad, especially for the price. It has a textured inside that feels coated with anti finger print stuff. It does attract dirt easily. The outside clear plastic is very slippery. The black frame is matte and has very little grip. The camera lip protects it OK and the top and bottom lips protect the front as well. I think could have come out a little farther as the sides have no lip, depending how the phone falls, could leave it vulnerable. The buttons are pretty springy. Cut outs should be all where they should be.
Protection: C
Button Feel: B
Materials: B
Which one is your top choice?
Do you have the i-blason marble case by chance?
https://www.amazon.com/i-Blason-Sam...rds=i-blason+marble+s20&qid=1587367089&sr=8-1
I don't need any case review but thank you for what you are doing, it's very nice from you.
What about this one?
Nillkin Camera Protection Case for Samsung Galaxy S20 Ultra 5G Slide Protect Lens Protection Cover for Samsung S20 Ultra 2020
https://www.amazon.com/Nillkin-Samsung-Galaxy-S20-Ultra/dp/B086W9LK12/
bigmann77 said:
Which one is your top choice?
Click to expand...
Click to collapse
Sadly. I don't have that one but I did have it for the S10+. Buttons were pretty responsive and protection was very good. A little bulky but the protection was excellent.
mxjcmxjc said:
What about this one?
Nillkin Camera Protection Case for Samsung Galaxy S20 Ultra 5G Slide Protect Lens Protection Cover for Samsung S20 Ultra 2020
https://www.amazon.com/Nillkin-Samsung-Galaxy-S20-Ultra/dp/B086W9LK12/
Click to expand...
Click to collapse
Already In the mail. Hopefully comes soon. I ordered this the day it came out on AliExpress
bigmann77 said:
Which one is your top choice?
Click to expand...
Click to collapse
Great question unfortunately it really depends what my day looks like. How formal I will be. If I'm going to be in a meeting all day or out and about. In the city or the wilderness. Even my outfit color.
Did you purchase any ballistic cases?
I'm curious if you have tried any of the "official" or "genuine" (/s) Alcantara cases on Aliexpress? https://bit.ly/2YdH46F is an example
20degrees said:
Did you purchase any ballistic cases?
Click to expand...
Click to collapse
Unfortunately none of which were under my price point. $15 - $20
pinoymutt said:
I'm curious if you have tried any of the "official" or "genuine" (/s) Alcantara cases on Aliexpress? https://bit.ly/2YdH46F is an example
Click to expand...
Click to collapse
Honestly they looked identical to my Samsung case. So I didn't. I just ordered it.
Did you purchase an Incipio Dual Pro? I'm concerned with the back camera protection.
I'm really looking for a case that have full front protection (including the side edges - most cases only have top and bottom lips) and the back camera not flush with the case.
freezingpoint said:
Did you purchase an Incipio Dual Pro? I'm concerned with the back camera protection.
I'm really looking for a case that have full front protection (including the side edges - most cases only have top and bottom lips) and the back camera not flush with the case.
Click to expand...
Click to collapse
Until I can find it for $15 or less I will not purchase it as it's outside my price range. Shame Incipio usually can be found cheap on ebay
Which case you got is the thinnest / least bulk?
Thanks.