Related
I have been using my S2 since the beginning of February 2012 and have not noticed at any time other than when making calls that the proximity sensor was activated (dull red glow). Just last night I noticed that the sensor seems to be activated all the time now, screen on, calling, whatever...
It of course turns off when the S2 is turned off. When booting back up it does not get enabled again until the end of media scanning.
Any ideas how to check which app or process is enabling this when it is not necessary nor wanted?
Shameless bump. Surely somebody has an idea what variable is involved or what program I can use to change the behavior?
Try after a fresh install with full wipe if it happens
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Well I don't know why, but the sensor has stopped running continuously without any intervention. Thanks for the reply.
I had a similar problem and I found out it was an app causing that - viber.
Probably it was the same with you.
NunxPT said:
I had a similar problem and I found out it was an app causing that - viber.
Probably it was the same with you.
Click to expand...
Click to collapse
Thanks! I had the same problem , and it was indeed Viber.
Btw , did you managed to fix it ?
ZVictor said:
Thanks! I had the same problem , and it was indeed Viber.
Btw , did you managed to fix it ?
Click to expand...
Click to collapse
New viber update today and the issue is fixed
Viber was the problem for me too
Hello all,
I updated my mobile to JB as soon as it was released in my country. Now the problem is that when I call or send sms, the message which pops up mentioning the amount deducted for it, is all transparent. I can't read the text as well.
In ICS no such problem was there. Can anyone help me solve this issue?
My mobile is not rooted.
Thank you for reading my thread.
Regards
just restart the phone...
Praveer said:
Hello all,
I updated my mobile to JB as soon as it was released in my country. Now the problem is that when I call or send sms, the message which pops up mentioning the amount deducted for it, is all transparent. I can't read the text as well.
In ICS no such problem was there. Can anyone help me solve this issue?
My mobile is not rooted.
Thank you for reading my thread.
Regards
Click to expand...
Click to collapse
I also faced this problem after updating to JB.....but after once I restarted the phone ,I did not get that problem till now....
sureshkadiri said:
I also faced this problem after updating to JB.....but after once I restarted the phone ,I did not get that problem till now....
Click to expand...
Click to collapse
Thanks a lot
Hello developers,from last 5 days my amazfit touch screen not working.Its getting charging and even displays time.I tried to restart it 100 times but no use.I drained the battery and charged it 100% but still no use.Anyone please help.
Found a solution
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
I try unpaired watch but touch not work,
bsvinod said:
Hi dear friend,
I also got the same issue with the watch. I found a solution to this. U can easily rectify it by unpairing the watch through phone's Amazfit app. Then watch will restart and touch will start to work. Afterwards if any updates for watch is available u can update.
Try this....
If already u have rectified the problem, tell me how and please share it. It will be useful for other users.
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ya it's work thanks bro its Diwali biggest gift thank you again
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
hajduk78 said:
I have the same problem, but even after I did the unpairing, it still doesn't work, and the battery drains within a day. Now I cannot even pair the watch with my phone (Mi6) as the screen does not react to touch.
Please, help!
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock?
Still no response
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
yunussalman said:
Dear bsvinod, i have done the same thing which you have said,but no use the display touch not working,its getting charged and shows the display but touch not working please help i really love this watch.
Click to expand...
Click to collapse
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
watch model
lfom said:
What is the watch model and firmware? Did you try to flash any ROM or it's still stock? ][
Click to expand...
Click to collapse
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.No,i haven't tried to flash its still stock.
Thanks in advance
yunussalman said:
the watch model is A1612 i dont have any idea about firmware as it is english version and i last updated it in september 2017 from then its display doesnt work.
Thanks in advance
Click to expand...
Click to collapse
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
No at present i have unpaired it.
lfom said:
So it's still stock... Does it connect to Amazfit app on phone? If yes, have you tried to upair the watch while it's connected and pair again? If yes again, I am sorry but most probably it's a hardware issue.
Click to expand...
Click to collapse
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
yunussalman said:
at present i have unpaired it but while i iam trying to pair it,its needed the QR code for which the watch doesnt connecting.
Click to expand...
Click to collapse
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
I Tried with other phones and other apps
lfom said:
Try with another Amazfit app version, another account, and another phone. If all fail, then again, probably it's due to a hardware failure.
Click to expand...
Click to collapse
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
I also have the same problem. Touch screen is not working. Pace 2.6.2.0. Pace is normally charging, no flickering on the screen. I have unpaired it with the phone, but no possibility to pair it again since I can't tell to confirm pairing number.
Poslano sa mog MI 6 koristeći Tapatalk
yunussalman said:
Dear friend,
i have tried with other phones and other apps but the watch doesnt show QR code to connect.
can i try to flash or factory reset my mobile by connecting it to pc?
is their any method to do it?
before the watch display stops responding i had installed custom watch faces into watch and after one week the watch's display stopped responding.
It gets charging its displaying only the current watch face but touch not responding.
Click to expand...
Click to collapse
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
yunussalman said:
Dear friends,
As my problem not resolved i went to mi showroom in hyderabad to get repaired as i entered and switched on my watch the touch got response and i increased my brightness and after 10 sec it again not responding i showed to them they said they dont know how to do.
One of other repair person said its clearly an software problem.After i came to room it again started responding but after few seconds it again stops.so can you please guide me how to factorh reset my amazfit pace english version watch?
Or help me to flash rom as mine is stock rom...please help
Click to expand...
Click to collapse
If it's paired with phone, go to Amazfit app -> My Watches -> More and tap on Unpair (it will erase all data on watch).
Or use the remote control app to go to Settings -> Device and choose factory reset. But I thought you had already done this (factory reset)...
Dear developers,
i have tried everything and at last my watch has been working its been updated 4 times and at present the version is 2.8.0.5
previously it was 1.2.6.0 or something.....its been working but sometimes the touch is not working,if i left it aside and after 10 to 15 minutes or after i restart it then it will work.
can you guys help me for this?
we can say that screen is flickering(making small quick moments).
please help
Anyone please help....iam a fitness freak and i badly need it to get repaired
Amazfit screen not showing anything
Hello, I'm writing hoping someone can help me.
My pace it's broken or so it seems, like it is turned on but not showing anything on screen. In first it seemed dead but was connected to my phone and counting steps but nothing on screen.
When receiving notifications it was vibrating as usual but again nothing on screen.
If I turn it off it shows battery charging, when I turn is on shows Amazfit logo but after screen shutsdown and nothing appears.
I have it unpaired now and can't pair again...
I have unlocked boatloader and reflashed latest us tomorrow but... Same behavior, did this appened to someone, or can someone help?
Thank you
lfom said:
Use the phone with Amazfit that is currently paired with the watch to unpair it, keep both close and connected to each other so when you unpair all data on watch will be erased.
Or try this:
https://github.com/MajeurAndroid/Adb-Remote-Screen
Click to expand...
Click to collapse
hi , anyone had any sucess with this app? the remote screen . ? i cant get it to work and also have the same problem with the stratos touchscreen , but half of the right side does not work
i bought a new amazfit verge us version (a1811) and updated its fw to 3.2.2.0. everything is fine but when the screen is off, notification beep sounds like sizzling and bad. all other sounds are normal. do you have the same problem? how can i fix it?
stu35 said:
i bought a new amazfit verge us version (a1811) and updated its fw to 3.2.2.0. everything is fine but when the screen is off, notification beep sounds like sizzling and bad. all other sounds are normal. do you have the same problem? how can i fix it?
Click to expand...
Click to collapse
A1811 is not US version it's international version, included US market. No i did not noticed any sounds problem. But if say honest most time i using only vibrate notifications without any sounds Sounds is in smartphone
several people in the forum came across the same problem. is it a condition that I need to send to the warranty? Is it solved by software update? I also sent a notification from the feedback section of amazfit watch.
stu35 said:
several people in the forum came across the same problem. is it a condition that I need to send to the warranty? Is it solved by software update? I also sent a notification from the feedback section of amazfit watch.
Click to expand...
Click to collapse
As i mentioned usually i using notifications without sound, only vibration is activated. When i did factory reset notifications sounds fine to me. But that was once, maybe two time when i used notifications with sound at all after these updates. So i can't confirm it's issues/bugs or not. But one advise which i got from Amazfit support when i asked about battery life which after update is shorter, they advised me to first do factory reset. So i can advise you the same. If problem will be the same you can try to chat before you will bring watch to seller or authorized service to Amazfit support and when after you will talk with support do what they will advise you or bring to service or seller. Factory reset if say honest most time fixing small problems in many devices (if there is no biggest violations): smartphones, smart watches and ect. Without detail review hard to say it's software problem or soundspeaker I have problem with wifi in my smartphone, when is turned on bluetooth wifi dropping, usually internet wokring fine in others device, dropping is not often, but when i turning off bluetooth works fine. Manufactor supporting gave me some advices which did not helped to me, need to test in others device or with others wifi connections, but i can't to do right now that. So it's conflict between wifi and bluetooth or just others reason it's hard to say. The same is with yours situation, about problem can confirm some costumers.users, but for others can work fine. So i posted my advises, i think the best right now is just to talk with Amazfit support before you return it to seller or bring it to authorized service or do factory reset, which by the way i recommend to do before connect with Amazfit support, cos i'm sure they will ask about that
thanks for the reply. i will try the factory reset. i hope it will fix it. thank you.. :good:
i did factory reset to watch and sent test notifications from amazfit watch app. nope. still continues same problem.. after all i set warning tone volume silent and only vibration. i hope it will be fixed with a firmware update.
stu35 said:
i did factory reset to watch and sent test notifications from amazfit watch app. nope. still continues same problem.. after all i set warning tone volume silent and only vibration. i hope it will be fixed with a firmware update.
Click to expand...
Click to collapse
This is support with chat option - https://support.amazfit.com/hc/en-us (if you can't see help/chat option, then scroll down with mouse and you will see chat window in left side of computer/smartphone), check from time to time are they online, coz they often are diconnected from chat. I can chat with they only when is evening in my country. I guest they are in US and connecting only in day time, maybe after lunch time
This is support via mail - https://en.amazfit.com/support.html, you can write from mail anytime, they will answer to you soon when they will can, probably
There is nothing to thank, I trying to help as much as I can. Sad that factory reset did not helped, try to chat with support (live or via mail, you probably just sent feedback from app, in feedback they don't react, i mean they will not answer to you)
I saw a post in Reddit from a Huami global support person in the Amazfit subreddit and i have mentioned to him about the sound problem as well as other things. He say it is a known problem and it is worked on. So hopefully with the next firmware we will get a fix for that.
Sent from my LG-H870 using XDA Labs
PsychoTribe said:
I saw a post in Reddit from a Huami global support person in the Amazfit subreddit and i have mentioned to him about the sound problem as well as other things. He say it is a known problem and it is worked on. So hopefully with the next firmware we will get a fix for that.
Sent from my LG-H870 using XDA Labs
Click to expand...
Click to collapse
Yep, and i wrote that here somewhere and on FB and other places. Its being worked on.
A problem with the sound is two months to me. The manufacturer is made to "cuckoo" - refuses to recognize the problem. A problem with sound exists in all - Europe, Russia, America.
I tried everything, settings, restart, unlock, new installation, Chinese version, factory settings - did not fix a problem.
There is an update rolling out at the moment that says it is fixing the problem. It is 3.2.3.0 if i remember correctly. Just have some patience. Should be here any time now.
PsychoTribe said:
There is an update rolling out at the moment that says it is fixing the problem. It is 3.2.3.0 if i remember correctly. Just have some patience. Should be here any time now.
Click to expand...
Click to collapse
I can confirm, i got update today was written the same
Hi,
Recently my Amazfit Stratos 3 is unable to pair with any music device using bluetooth (i.e. earphones, earbus, etc.). Bluetooth works when pairing with the phone app but when trying to connect with my earphones it says "Turning Bluetooth on" and then "Bluetooth is off".
It was working fine a week ago and nothing changed.
Tried to restart, shut down, etc.. but no luck.
Anyone has any thoughts?
Try a factory reset.
I had a similar problem with bluetooth, when I turned on wifi it worked bluetooth too. It might work for you too.
omerhodzic1 said:
I had a similar problem with bluetooth, when I turned on wifi it worked bluetooth too. It might work for you too.
Click to expand...
Click to collapse
Tried but Wifi is also not working!
lindomaroliveira said:
Try a factory reset.
Click to expand...
Click to collapse
Tried a factory reset and it didn't help. no changes..
Bluetooth working for syncing with the App.. I don't understand this...
leugim1 said:
Tried but Wifi is also not working!
Tried a factory reset and it didn't help. no changes..
Bluetooth working for syncing with the App.. I don't understand this...
Click to expand...
Click to collapse
I have the very same problem. Bluetooth is working for syncing with the App, but cant get it work for pairing with earphones. Always says blueetohd off. This happened to me after upgradng to firmware to 4.2.4.0. Before that version it was working perfectly.
After reaching out to support several times and providing an error report the answer was :
We have checked your issue and it is an issue that cannot be solved online
This seems a canned response, I don believe that suddenly the watch is "broken"
toffen said:
I have the very same problem. Bluetooth is working for syncing with the App, but cant get it work for pairing with earphones. Always says blueetohd off. This happened to me after upgradng to firmware to 4.2.4.0. Before that version it was working perfectly.
After reaching out to support several times and providing an error report the answer was :
We have checked your issue and it is an issue that cannot be solved online
This seems a canned response, I don believe that suddenly the watch is "broken"
Click to expand...
Click to collapse
Hi,
Also got that response from Amazfit support. They have asked me to do further tests to the connectivity but they all fail. I don't know how to fix this issue..
Any suggestions are welcomed..
Completely related to https://forum.xda-developers.com/smartwatch/amazfit/stratos-3-probleme-bluetooth-t4029301