Related
Guys I have a strange problem my razr wont connect to any of the data 2g or 3g only on custom roms like 4.4 Kitkat,Carbon rom etc . I flashed them on slot 1,2 even on stock slot but no luck.. I tried to change Baseband But It always failed So guys help me.....
Edit 11.12.2013:::
I fixed the problem partially..
I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
Edit::::
Now Phone says NO SERVICE on both stock And custom rom but reads sim card contacts & SMS's...
I tried reflashing stock rom But no success. Help me guys...
2g/3g for many of the newer roms has been a problem with both the XT910 and XT912. I know with cyanogenmod 10.2 I'm still not able to connect to 2g/3g although LTE does work. With the newest release of cyanogenmod 11 though I do get 3g and LTE, although some people have been reporting they are not. Seems it's headed in the right direction. Give the latest CM11 build a shot and see if it works for you.
Sent from my Nexus 10 using xda app-developers app
kk but still i have no luck getting 3g on newer versions too.
Is there any APN that saved in your network setting? If it doesn't, set it and save it by hand.
Sorry for my bad English
yup apn's are saved as usual
3n3rg1c said:
yup apn's are saved as usual
Click to expand...
Click to collapse
Uninstall your SIM CARD, and reinstall it again.
Sorry for my bad English
tried Not working Now even more strange thing happend NO SERVICE on Stock also but phone is reading sim card. I can see contacts & sms saved in sim card...
3n3rg1c said:
tried Not working Now even more strange thing happend NO SERVICE on Stock also but phone is reading sim card. I can see contacts & sms saved in sim card...
Click to expand...
Click to collapse
Reboot
Sorry for my bad English
Nothing is helping me dude I also tried flashing stock rom via rsd also.,.
3n3rg1c said:
Nothing is helping me dude I also tried flashing stock rom via rsd also.,.
Click to expand...
Click to collapse
Can you make a call? Did you have paid the SIM card cost?
Sorry for my bad English
Yup my SIM is in contract and working on other phones I can make and receive calls but not on razr I get NO SERVICE message
Open the phone (or dialer, whatever you would like to call it) and Dial *#*#4636#*#* and go to Phone Information and tell us what the preferred network is.
--
Also:
What ROM did you get LTE Only on?
I learned that sometimes ROMs can mess up NV's. The only way of fixing this is to wipe everything and start fresh. And when you are flashing you cannot downgrade, it will fail every time. You may already know what I am telling you but just in case.
And what carrier are you with?
Sent from my XT912 using Tapatalk
In my case in testing I am on GSM auto prl. I tried Flashing JB stock moto BUT it also did not solved my problem. I have erased my cid and checked with different region stock also but no progress
happened with my friend's xt912
turned out sim jacket problem
Hooray I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
3n3rg1c said:
Hooray I fixed the network mess It was bad radio which did this all I flashed ICS radio and now network works fine in all roms (Stock and Custom) BuT bo mobile data on any of them
Click to expand...
Click to collapse
I m having same mobile phone xt910 with idea sim ... already pissed with moto and google for not releasing JB in entire asia &
Now Same problem here but differnence i having this problem a sudden out of nowhere
its just been 13th month for my razr
never rooted or flashed ...
just updated to ICS from stock GB via usb data cable as update was in my country
I purchase a new microSIM & also did a data / factory rest from phone boot option ( u know from tht recovery option comes after rebooting in boot seq mode) to solve the problem but no positive result ... though i found one thing if u go to settings -> more -> mobile networks-> select network ... there you'll find 3 option
1) 2G only
2) 3G only
3) automatic default
well by 1st option works it given me range ... doesn't show no service or emergency calls but 2nd & 3rd option gives me same problem " NO SERVICE " or " EMERGENCY CALL "
sys version -
673.943.328.XT910.AsiaRetail.en.03
firmware version -
GAS_ASIA_USASPDRICSIRD_P021
i m worried if its really sim card jacket problem ...
hey faheemakbar18 how much time & money it took to fix that problem
I dont think its the problem of sim jack. Just go to dialer then *#*#4636*#*# then to phone info then hit menu key select radio band & choose option to automatic.. Hope this helps you.. I had same issue when I chose US BAND
XT910
3n3rg1c said:
I dont think its the problem of sim jack. Just go to dialer then *#*#4636*#*# then to phone info then hit menu key select radio band & choose option to automatic.. Hope this helps you.. I had same issue when I chose US BAND
Click to expand...
Click to collapse
Hi. I have XT910 for more than two years. After brought the phone from Australia to Hong Kong (use Hong Kong SIM card) and back to Australia (replace SIM card with Aus one), I have the same problem as you. Phone can make voice call, but no mobile data connection (3G, 2G).
Want to know if your problem is fixed or not?
I once had an issue like this on my xt910 gsm and I found a way to fix it
Murphyung said:
I once had an issue like this on my xt910 gsm and I found a way to fix it
Click to expand...
Click to collapse
Hi. Can you tell me how to fix the issue: no mobile data, and phone saying "Syncing SIM card contacts"? Thanks.
I've ruled out everything I could think of, and the best this did was just give me 4G (7MB/sec downloads), and not 4G LTE (used to get 35MB/sec and up).
Things I've tried (with proper wiping/cleaning cache, data, system, dalvik cache before every single flash):
1- Unlock the SM-G900T, and add the IMEI to my account on att
2- check with att that LTE is working
3- get a new SIM card anyway because I'm paranoid!!!
4- Flash NG3 stock on the device, flash it back to NCH
5- Root the device, flash TWRP, and CM based Slim ROM on the device, and com.android. ... error
6- flash back to stock
7- APN is correct, ATT Phone APN and LTE is selected
What I noticed now is that typing *#*#4636#*#* in the dialer does nothing, and I mean nothing! It just sits there.
What am I missing here? (besides the rest of hair I had left on my head)
RESOLVED: It was a brilliant att agent that messed up my data plan while switching IMEI numbers!!! Lesson learned; think outside the box.
Glad you got it resolved.
Please edit your title so people can see easily see that too.
This is actually a common result and one of the most basic trouble shooting steps would be confirming that your SIM card is properly provisioned for LTE.. which usually requires a call to the carrier to check your account settings from the carrier side.
Enjoy your faster phone.
.
I thought you aren't suppose to give att your imei if it's a tmobile device?
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Change the rom
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
valy_cta said:
So by a stupid mistake I have selected in *#*#4636#*#* the Radio Band to USA. The signal suddenly dropped and it stopped working at all, the nework does not connect except in 4G and only for data. Calls and text are not working, only 4G data works fine. This is on the sim1 though. On sim2 all is ok (except that with the X829 ROM, on sim2 I have no data, and on sim1 I have no calls )) ). I was on sim1 when I've changed the Radio Band, so I guess that only this one got affected since sim2 is working properly.
Is there any Radio Band files that I can restore? Or some app that can restore the settings of the modem?
Any help is highly appreciated.
PS: Reinstalling the ROM (clean or dirty) doesn't help. Factory resetting also doesn't help. I would downgrade to 014s but I'm afraid not to end up with a brick.
Click to expand...
Click to collapse
I did the same thing by my mistake.And my le max 2 also became not able to connect internet. In my case, it can't connect both 4G and 3G .
But I fixed it. But I don't know that it get back to the original completely.
I'm japanese.And I'm sorry for that my English skil is very poor.
My current rom is Le2_X820-MAX_ROW-5.8.015S_V29_CUOCO92.
I used DFS CDMA TOOL and checked the items on the "Band Preferred" same as "RF BC Config".
1. download HTC Diag Driver. You have to customize .inf file later.
2. conect device to your windows pc and choose MTP and USB Debugging.
3. enter the follows command.
"adb shell"
"su"
"setprop sys.usb.config diag,adb"
When you enter this command, your device change over diag mode.
4. diag driver install.
You have to find hardwawer ID from device manager.
And replace the hardware ID in .inf file.
5. If you install diag driver correctly, you will be able to use DFS CDMA TOOL.
sorry, I can't explain any more..English is difficult...
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Ootp said:
If i were you. I would change the rom from china to indian rom. It would help you. The radio band of chinese rom and the indian rom is different. It would replace the radio band of chinese rom and if it doesn't work. Then return to the chinese rom
I'm 100% sure it would help you.
Click to expand...
Click to collapse
Many thanks for the advice but it didn't help. I had installed the indian rom and then to the chinese without any change in the behavior of the modem. I'll try the chatmonchy's advice to see if there will be any improvement.
xterminater07 said:
I bought my phone from china and I'm in US, and it works perfect on stock with LTE enabled for AT&T by default. Might I ask why did you change it to US band and it stopped working? It would still work right?
Click to expand...
Click to collapse
Actually I'm in Europe and looks like we use slightly different bands (??). I get 4G data but without calls. To other networks like 2G and 3G it connects sometimes but it's for few seconds only. I even don't remember what made me change the bands to USA, I guess I was curios what settings those were. The options are "USA band" and "Band 6", neither one is working well for my device. And strangely though, there is no other option to go back like "Auto" or something. It seems that I'm not the only one that did it. After a google search, it turned out that a lot of people had the same issue. For some, the factory reset helped, for others was flashing via TWRP the radio bands again.
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
valy_cta said:
I had solved the issue and I will post a guide later on for those who want to unlock additional bands or did the same mistake as I did.
Thanks for the help guys.
Click to expand...
Click to collapse
That's good!!
I'm looking forward to your guide about unlock additional bands.
thread: [SOLVED] Accidentally changed the Radio Band to USA
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
readion said:
Hi, gyus
I had the same problem, i select USA band and everything went wrong,
The simplest way for me was:
installing "X820 LeMax2 RevolutioN_Team Resurrection Remix", no other from TeamSpain, only Resurrection Remix
http://revolutionlemax2.blogspot.al/
https://mega.nz/#!T9o0wAhJ!iLa9mrPAr...VkCg3_L-q2RgnA
then after installation, go in dialer and call *#*#4636#*#*.
There are three band: Automaic, USA, and EURO.
I select the EURO and everything i'ts OK.
BEFORE DO ACTIONS DON'T FORGET TO BACKUP ALL THE ROM WHERE YOU ARE WITH TWRP
Click to expand...
Click to collapse
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
---------- Post added at 02:35 PM ---------- Previous post was at 02:33 PM ----------
karellang said:
Hi, how to install this ROM? Which TRWP I need? I install with official TWRP, but bootlop after instalation.
Click to expand...
Click to collapse
Try this link for recovery by GrossoShop Couco92
https://www.androidfilehost.com/?w=files&flid=57913
Does not help. If I go to servise menu (dial *#*#4636#*#*) , I see Radio turned OFF and I can´t change it. How to solve this ?
Did you post any guide how you solved the issue?
Unfortunately USA band selected
Hi,
I live in India. I bought Oppo F3 Plus (CPH1613) 4Gb Ram, 64GB Storage, Qualcomm MSM8976 Pro Snapdragon 653 a year ago and was working too much fine. I was wondering about Qualcomm mobile secret codes and found this *#*#4636#*#* . I dialed this and accidentally changed radio band to USA band and suddnly on instant my mobile didn't get any network signal. From then, I went for Oppo care, and mobile repairing shops and self tried and tested for lots of time; but everyone unable to bring phone to normal. I reset my mobile, flashed stock rom for countless times, wiped all data but nothing helped me out. Finally i rooted my oppo f3 plus and tried to boot in fastboot mode; but Oppo removed bootloader and fastboot mode from 2016 (as posted in XDA). I got a little link about resetting USA band to automate and is erasing modemst1 and modemst2. But again it have to be performed from fastboot.
Help me out for my mobile.
You can flash a modem file, it will reset it as well. Changing the ROM won't update the modem configuration. Try to search modem files and flash them via TWRP.
OK so freedompop is an app that lets you call, text, and get data for free. They also include a sim card, but you need to make an account and order it. Add your credit card to make account, once you get it make sure to call them and tell them you want to be on the free service, i got some special that gave sim card plus unlimited call and text with 2gb for 5 dollars. Once you make an account go ahead and go to your sim port and remove sim(easly done by taking a small flat head at 20 degree angle to push sim out, the you can use your finger to push it down or get another small flat head and grab from both sides to pull out). It will say invalid sim.....now thanks to darksavior, this is what i did and the idoneapps gt
Rooted
Step
1. Open up odin, click options and select nand erase all if you want, then click ap and select the N900PVPUDNH7_N900PSPTDNH7_N900PVPUDNH7_HOME.tar. Connect your phone in odin mode(power down, hold volume down, home button, and power button, press up to accept and your in odin mode) then hit start untill your phone reboots
2. Mine gets stuck at the samsung logo so what you do is go to recovery mode(power down, hold volume up, home, power)get to factory reset and reboot. 5 mins later it should say setting up phone for first time, this may take 5 to 10 mins.
3. Congrats, your on stock rom. Invalid sim and attempting to activate phone should pop up, you click active and it will say failed and hit exit. Power back down to odin mode
4. Click ap again and choose the CF-Auto-Root-hltespr-hltespr-smn900p.tar file, it will restart and root, when the message appears 10 seconds to restart try to go into odin mode again and choose the twrp-2.8.7.0-hlte-4.4.img(this is the verision needed to install most roms nowadays) and install twrp. Go to recovery mode, wipe, advance wipe, select delvik cache and cache, then reboot to system. Power off phone again and go into odin mode last time, and click CP button and choose the modem.bin file and reboot to system.
5. put the GTv3.1.5.apk in root of your sd or phone so you can find it. So we need to go to settings, general, security, check mark unknown sources and discheck verify apps. go on apps, samsung, my files, all, choose where you put your file,and click on it, then hit install, open, grant root access, it should say Baseband: N900PVPUBMJ4 and Bootloader: N900PVPUDNH7
6. Click sim uicc unlock, success, and should show UNLOCKED. Click the off button on hiddenmenu and it should turn on, click the IOTHIDDENMENU button on bottom of screen, TestMode Menu, UE SETTINGS AND INFO, SETTINGS, PROTOCOL, GCF, GSM/(E)GPRS/WCDMA GCF ON, success, restart phone to see At&t at bottom
7. Settings, connections, more networks, mobile networks, network mode, Gsm/umts, automatic, then access point names, plus sign, name what ever you want, apn fp.com.attz (or what ever it says in envople your sim came in) the button on the left from home button, save, and click the circle so its green.
8. Turn on your wifi and go to playstore to download the freedompop messaging phone sim app, open it up, it should read your sim and sign you in. Turn off your wifi and you should see an H+ network. Thats it your on freedompop now
9. Since this is older firmware i looked and saw developers stopped making roms for this back in 2014, so your pretty much stuck on this firmware but its not so bad your rooted. So what i did was install System app remover (ROOT) from play store and removed the annoying samsung dms service to get rid of the activation screen and anything else i didnt want on the phone.
Bonus, my 3 year old orginal samsung battery went crazy and kinda got fat. So i ordered another orginal oem note 3 battery because ive tested batterys through AccuBattery app and found out batterys lie about their mAh size orginals dont. Anyways got the new battery, used the battery repair on it, and advanced battery calibrator app, (calabrate, ok, close ad, shut down, charge to 100%) so now my freedom pop working and brand new battery
and here is link to all files from google drive https://drive.google.com/drive/folders/0B9MVYh1yVnznNzhQeWxtUTJhZnM?usp=sharing
Yes, it works. I sim unlocked my note 3 for domestic use without sprint's help. I did it two weeks ago. My phone now gets LTE gsm through freedompop's gsm sim. There's two threads in the general note 3 sprint section to read up on, but this might be the simpler one:
https://forum.xda-developers.com/note-3-sprint/general/sprint-galaxy-note-3-international-t3339789
The tutorial needs to be re-written. The goal is to be on NH7 bootloader, 4.4 rom, and MJ4 modem. Galaxy tools will unlock the sim only on 4.4 and it only needs to be done once. I installed NH7 stock rom, rooted, then installed MJ4 modem. You won't be able to use sprint roms anymore after you're done altering stuff in the hidden menu. It will have trouble getting a gsm signal. I am on a note 7 ported rom from the main note 3 section. You can try any others if you want.
Here's the corrections from the tutorial thread:
Step 1: Do NOT install the cf-auto root recovery from that thread, since its meant for lollipop, and it won't work on kk.
Step 2: You only need GT 3.1.5 apk
Step 3: You only need MJ4
Step 4: You need to be on a 4.4 rom to do this.
Step 5: You can open the hidden menu with GT. No need to open the phone app and dial to get it.
If that doesn't work, I also installed the regionlock away app and changed some other settings of the hidden menu from the other sim unlock thread. I'm not sure if that makes a difference.
Ill try this. So from what i understand. Download stock NH7 rom from sammobile, root, install gt apk, flash the mj4 modem, and follow the directions on gt apk
djhulk2 said:
Ill try this. So from what i understand. Download stock NH7 rom from sammobile, root, install gt apk, flash the mj4 modem, and follow the directions on gt apk
Click to expand...
Click to collapse
Sounds right. Also install twrp 2.8.7.0 recovery so you can install a rom from https://forum.xda-developers.com/galaxy-note-3
It has to be that version because newer versions have issues with roms that use aroma installers.
darksavior said:
Sounds right. Also install twrp 2.8.7.0 recovery so you can install a rom from https://forum.xda-developers.com/galaxy-note-3
It has to be that version because newer versions have issues with roms that use aroma installers.
Click to expand...
Click to collapse
ok the only problem im having is finding a cf rooter under 5.0
ok i followed your instruction i did the 3.15 app only. pressed unlock and the SIM uicc: UNLOCKED. it is also saying phone type gsm, then i dialed Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success"
and i got success. But it is saying the sim card is still invalid
but i have done all i should right? and am unlocked
djhulk2 said:
ok i followed your instruction i did the 3.15 app only. pressed unlock and the SIM uicc: UNLOCKED. it is also saying phone type gsm, then i dialed Goto the phone app and dial *#0011# the menu should open up press menu and back then menu key input "Q" press ok then press menu key input again "0000" press ok and wait for the menu to open
UE Setting & Info >Setting >Protocol >GCF >GSM/(E)GPRS/WCDMA GCF ON
It will say "success"
and i got success. But it is saying the sim card is still invalid
but i have done all i should right? and am unlocked
Click to expand...
Click to collapse
Are you on the MJ4 modem? I installed that after i unlocked my sim and the invalid sim msg went away. I rooted with kingoroot on pc. There might be alternate ways but that seemed to work.
You can also try the method from https://forum.xda-developers.com/showthread.php?t=2593305
darksavior said:
Are you on the MJ4 modem? I installed that after i unlocked my sim and the invalid sim msg went away. I rooted with kingoroot on pc. There might be alternate ways but that seemed to work.
You can also try the method from https://forum.xda-developers.com/showthread.php?t=2593305
Click to expand...
Click to collapse
yes im getting modem from this post https://forum.xda-developers.com/showthread.php?t=2684798
it is no longer showing invalid sim but At&T at bottom xD
djhulk2 said:
yes im getting modem from this post https://forum.xda-developers.com/showthread.php?t=2684798
it is no longer showing invalid sim but At&T at bottom xD
Click to expand...
Click to collapse
now it showing at&t and t mobile, after clicking settings, network, mobile networks, select provider....but how do i choose this freedom pop network
djhulk2 said:
now it showing at&t and t mobile, after clicking settings, network, mobile networks, select provider....but how do i choose this freedom pop network
Click to expand...
Click to collapse
Fp uses the att network. Make an apn with fp.com.attz then download the fp messaging app. It should give you a notification of your phone number. If the connection is unstable, use another rom.
ok i will try again, i did all those steps without the modom. I installed the modom last and was on at&t...then i installed rom and said invalid sim xD so ill try again the right way. it should no longer say invalid sim any more at all right? and i dont need to select the gsm network or lte cmda? just once it shows at&t at bottom make the apn?
darksavior said:
Fp uses the att network. Make an apn with fp.com.attz then download the fp messaging app. It should give you a notification of your phone number. If the connection is unstable, use another rom.
Click to expand...
Click to collapse
so after an hour success. im connected to a network showing as H+ and internet working. im going back to darklord rom and hope sim still works
Qq on the darklord rom it says sim invalid. So i only got freedompop to work on the sprint stock rom
djhulk2 said:
Qq on the darklord rom it says sim invalid. So i only got freedompop to work on the sprint stock rom
Click to expand...
Click to collapse
Make sure you're on the correct bootloader and modem. It shouldn't say that anymore. As i said, you can also try the other tutorial that has a bit more stuff to edit in hidden menu. Use GT to access it.
You can try the regionlock away apk.
What darklord rom are you on? Darklord roms tend to be junk compared to the new note 7 ports.
Phronesis might work but I'm on a norma note 7 port, installed with tmobile option(not sure if that helps), and mobile networks I did not touch. It was set to auto (lte/3g/2g)
Ill try the tmobile option also, it doesnt have at&t option from install
So region lockaway didnt do anything, i try click unlock from gt and it asks for a code. I did the dial and domestic unlock but it also didnt do anything
Unless....i can only use 4.4 roms
I tried "FREEDOMPOP(CDMA sprint sim LTE)" on "MM 6.0.1 Darklord Modded V5 By JCordero31 N5N7 APPS 1/22/17" with MVNOBuzbee.zip
but it did not work. MVNOBuzbee.zip might need edited but i just decided to move on.
So then...is just this rom not working with or i need be on any 4.4 rom
djhulk2 said:
So region lockaway didnt do anything, i try click unlock from gt and it asks for a code. I did the dial and domestic unlock but it also didnt do anything
Unless....i can only use 4.4 roms
Click to expand...
Click to collapse
You are not on the correct bootloader or modem. That's why it got locked again. Also, you can't unlock on a LP rom, so you''ll get that window for a code. So let me repeat myself:
You have to be on NH7 and MJ4 and a 4.4 rom to unlock sim. you HAVE to stay on NH7 and MJ4 FOREVER in order for the sim unlock to stick. You don't have to stay on the 4.4 rom. NEVER flash a stock rom again since it will flash its own bl and modem, in your case, PH1.
You undid all your work by flashing a stock rom...
Ok i can live with that. So as long as modem and bootloader stay same...i can unlock, then flash any 4.4 rom and not have ti redo all this?
Hi,
Following a tips in an android newsblog (In France), i was visiting the *#*#4636#*#* menu.
By curiosity, I tap on the menu "Sélectionner une bande radio" (choose a baseband).
I've only a "United States" choice but after did nothing. I lose all my phone network.
Just the data work and the sms.
What can I do to this ?
I think to flash a baseband firmware but where can I find one ?
Thanks for everyone who could save my phone
RyseSorel said:
Hi,
Following a tips in an android newsblog (In France), i was visiting the *#*#4636#*#* menu.
By curiosity, I tap on the menu "Sélectionner une bande radio" (choose a baseband).
I've only a "United States" choice but after did nothing. I lose all my phone network.
Just the data work and the sms.
What can I do to this ?
I think to flash a baseband firmware but where can I find one ?
Thanks for everyone who could save my phone
Click to expand...
Click to collapse
Switch your radio band back to automatic? Go to *#*#4636#*#* and click the overview (3 dots) at the top right. Hit select radio band, then hit automatic. Reboot phone.
Thanks but no auto option for me :/
I've done a Factory reset but no change.
Somcom3X said:
Switch your radio band back to automatic? Go to *#*#4636#*#* and click the overview (3 dots) at the top right. Hit select radio band, then hit automatic. Reboot phone.
Click to expand...
Click to collapse
I try to put network in Only 3G or 2G and got nothing. Maybe that's why there's no call but sms and data. No VoLTE in France.
When selecting United States band (that I didn't want to do), i break the 3G and 2G connection.
Hi,
I've speak with the Motorola support in France.
In the hidden menu, i've selected the united states band so now I only received the LTE (the only which are the same than here). No 3G and no 2G.
And because We've got no VoLTE, I can't use calls.
And no method to revert this process.
Go in warranty...
Actually there should be a way, because I have the selection:
Automatic
Europe
Automatic
United States
You probably have to update to a current stock ROM so the modem firmware updates and you might be able to select a different baseband... all theory but if you still have the phone, it's worth a try.
edit: I'm using a custom ROM, so I may be wrong.
For you there is no way of using a custom ROM without having problems with warranty.
If still relevant, I made the same mistake with my stock Moto xt1650-03 and the only way managed to restore signal was by using fastboot erase modemst commands. Though I have seen people not recommending this method, it worked for me.