[KINZIE] SailfishOS - Droid Turbo 2 Original Android Development

THIS WILL ONLY WORK ON KINZIE AKA MOTO X FORCE!
Warning: Flashing this may void your device’s warranty, lead
to data loss, hair loss, financial loss, privacy loss, security breaches, or other damage, and therefore
must be done entirely at your own risk. No one affiliated with this project is responsible for your
actions but yourself.
Click to expand...
Click to collapse
Not working:
Hotspot is working but buggy (spam turn on a bit and it should work)
Camera recording
maybe some minor bugs
To get store working set password in developer tools and then run in terminal "devel-su zypper ref" then type password and ignore first repo error.
INSTALL:
- download cm13 base
- download rootfs
- [OPTIONAL] flash Jolla bootlogo
- wipe everything (data/dalvik/system/cache you know)
- Install cm13
- Install rootfs
- Boot
- Reboot after first boot to have audio control fixed
- Have fun
Changelog:
BUILD 3:
Initial public release
STABLE 1:
Fixed usb networking
Fixed led
Fixed audio volume control
STABLE 2:
Update to 2.2.0.29
STABLE 3:
Update to 2.2.1.18
STABLE 4:
Update to 3.0.0.8
Fixed cpu hotplug settings (i thought i added it already sry) so it will now work A LOT BETTER
F.A.Q.
OTA
Run in terminal:
Code:
devel-su ssu re 3.0.0.8
devel-su ssu ar adaptation-community http://repo.merproject.org/obs/nemo:/testing:/hw:/motorola:/kinzie/sailfishos_3.0.0.8/
devel-su ssu ar adaptation-community-common http://repo.merproject.org/obs/nemo:/testing:/hw:/common/sailfishos_3.0.0.8/
devel-su zypper clean -a
devel-su zypper ref -f
version --dup
reboot phone
HOW TO REPORT BUG
After bug occurs type in the terminal following commands:
/usr/libexec/droid-hybris/system/bin/logcat
devel-su dmesg
devel-su journalctl
and give me logs from there (do not paste it in the post! Use pastebin.com)
devel-su will ask you for password, you can set it in developer tools.
Many thanks to mal and other people on #sailfishos-porters IRC channel that helped me.
XDA:DevDB Information
SailfishOS, ROM for the Droid Turbo 2
Contributors
Mister_Magister
Source Code: https://github.com/VerdandiTeam
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: SailfishOS
Version Information
Status: Stable
Current Stable Version: 4
Created 2017-08-30
Last Updated 2018-11-10

Reserved

I'd like to see how this works out.

Added Jolla bootlogo

Guys i made idle battery life a lot better. I'll upload build today/tomorrow
UPLOADED

I did not criticize the expensive system, I just wanted to show some screenshots that I took when I installed the OS.
but the forum does not allow new users to post external links with less than 10 postangens.

luccas_bandeira said:
I did not criticize the expensive system, I just wanted to show some screenshots that I took when I installed the OS.
but the forum does not allow new users to post external links with less than 10 postangens.
Click to expand...
Click to collapse
You probably still don't see it. "Selfish" is an insult. Sailfish is an Operating system made by Jolla. Know your typo :highfive:

Mister_Magister said:
You probably still don't see it. "Selfish" is an insult. Sailfish is an Operating system made by Jolla. Know your typo :highfive:
Click to expand...
Click to collapse
wtf.. ._.

Guys i have fixed notification led but you gotta wait for it a bit

Nice
Awesome..

Guys i got bt turned on (nothing else but turning on/off works but it turns on!) And also doing some weird stuff with kernel will try also fix camera recording

AD working?
Is Dalvik working on this port? Someone pointed to this on TMO : here

lfc222222 said:
Is Dalvik working on this port? Someone pointed to this on TMO : here
Click to expand...
Click to collapse
Well Mister1Magister looks like me so dunno think for yourself

next question: do you intend to have Dalvik work on any future device port you are trying to fund?
If so, how do you pick devices? (Ok, that’s 2...)

lfc222222 said:
next question: do you intend to have Dalvik work on any future device port you are trying to fund?
If so, how do you pick devices? (Ok, that’s 2...)
Click to expand...
Click to collapse
Aliendalvik not dalvik that's first. Aliendalvik is avaliable only for official devices, it just happened to work on kinzie too (just needed to change some file). I was planning to port anbox for this and any other device but it's currently almost not working and it's hard :/
How do i choose devices? Well i love motorolas because they're very very easy to port so i'm sure they will work. I'm throwing away brands that i hate/i know sfos would not work on them. My 2 crowdfunding campaigns covers moto x style and huawei p8 lite it was almost choosed by people (i picked them from sailfishos port request page). I'll by for myself from my money moto x 1 and x2 cuz i love them X force was choosed because it was very interesting device and also it's probably one of the most powerful sfos powered device rn so i wanted to show people that not only ultra old devices have sfos but newest ones too (well x force is 2 years old but still have great specs). so yeah once anbox get usable i'll try to port on x force and every device that i have/will have

Well guys my work is freezed until my X Force get repaired

Appreciate your work! Sent a small $5 donation, thanks and hope your device will be repaired soon!

alex3594 said:
Appreciate your work! Sent a small $5 donation, thanks and hope your device will be repaired soon!
Click to expand...
Click to collapse
Yeah thank you very much! It will be used to bring another device!

A question: can this sailfish version on the device be updated OTA to the latest version?
Or will it be stuck at version 2.1.1.26 built5? Many thanks and best wished

Woermel said:
A question: can this sailfish version on the device be updated OTA to the latest version?
Or will it be stuck at version 2.1.1.26 built5? Many thanks and best wished
Click to expand...
Click to collapse
There will be non ota update to 2.1.3 once my phone get fixed. cant do ota untill it gets fixed

Related

Android 6.0 for Mi3/Mi4 ! How to install GUIDE! Working GAPPS!

Even though MIUI is still based on 4.4.4 for Mi3 and Mi4 marshmallow ROM is out for the device!
UPDATE-
Marshmallow for Mi3/Mi4 is out! and here is the guide to install it with mini review! with Working GAPPS!!!
Rom is pretty smooth for me ! DOZE works, play store works! Lil Gaming is also done in the video which was nice too!
All the links are in the video and you can tell me any bugs if you find!
Video- https://youtu.be/PKJWlYNnwXE
Downloads-
--ROM- http://bit.ly/1LKYHfR
Mirror of ROM on Mega- http://bit.ly/1kl9BQ3
--Gapps- http://bit.ly/1Wsp8d9
--TWRP recovery- https://dl.twrp.me/cancro/
Its been just a few days since Google announced its latest Android 6.0 Marshmallow version. But developers have already started working on the new update for existing devices.
According to the new Weibo post from the active Chinese developer, Ivan, we could see the first developer version of Android 6.0 Marshmallow on Xiaomi Mi3 real soon.
Of course, you may have to wait for a few more weeks until the first usable version is available, but its still good to see that thanks to such active developers, you can try out the latest Marshmallow Android update months before the official release.
Ivan notes that he’s still fixing bugs on his Xiaomi Mi3. And once he’s done with the Xiaomi Mi3 model, he will move on to the flagship Xiaomi Mi4.
So, Mi4 users also have something to cheer about. Further, he adds that he will also try to install it on the three year old Xiaomi Mi2 model as well (if possible) and finally move on the the Xiaomi Mi Note standard edition.
Check this for Updates- http://en.miui.com/thread-170774-1-1.html
Source
just hope that camera will work better than in lollipop
I hope Ivan will release also the kernel source, but that will never happen
there is not camera app?
it does show up in 2nd screenshot
Sent from my MI 3W
@TheDj408 hi bro.. Follows your videos on youtube.. I am facing a bug on all the custom roms except ivan aosp nd miui. The bug is that whenever i call someone with loudspeaker on, the other person is not able to hear anything.. Infact my voice comes back to me.. Can you help me with this bug?? I have tried everything but nothing is helping me. I have mi3
Any news?
see here: http://en.miui.com/thread-170774-1-1.html
Latest Updates, 14-Oct;
It seem like our Mr. Ivan is making good progress, as he had resolved several issues, e.g. telephony, Bluetooth & WiFi. He is working on the camera connectivity and data-connectivity issues. He also mentioned, his beta testing would take shorter than he expected to be, 1 week instead of 2 weeks!.
Click to expand...
Click to collapse
New info from Ivan Weibo:
http://m.weibo.cn/page/tpl?containerid=1005051697247850_-_WEIBO_SECOND_PROFILE_WEIBO&itemid=&title=%26%2320840%3B%26%2337096%3B%26%2324494%3B%26%2321338%3B
Internal beta testing for android 6.0 started(19-oct)
Only issue still left are
Data connectivity
Camera connectivity
Hsmetric181 said:
International beta testing for android 6.0 started(19-oct)
Only issue still left are
Data connectivity
Camera connectivity
Click to expand...
Click to collapse
can you post download link ?
GhostWANTED said:
can you post download link ?
Click to expand...
Click to collapse
UPDATES: 19-Oct, He released his beta testing to his internal testing group ! There is no major issues but the CAMERA and DATA CONNECTIVITY is not working though.
Thanks for updates
Armin_van_buuren said:
UPDATES: 19-Oct, He released his beta testing to his internal testing group ! There is no major issues but the CAMERA and DATA CONNECTIVITY is not working though.
Click to expand...
Click to collapse
ahn ok..he write international so i think he wrote wrong..
GhostWANTED said:
ahn ok..he write international so i think he wrote wrong..
Click to expand...
Click to collapse
Ops!! My bad,corrected now?
New info:
Great News!
22-Oct, He managed to resolve the data-connectivity! And he is left with camera-issue only!
Armin_van_buuren said:
New info:
Great News!
22-Oct, He managed to resolve the data-connectivity! And he is left with camera-issue only!
Click to expand...
Click to collapse
fingers crossed, keep us updated!
This weekend there are the first preview version. Camera takes still problems.
cancro的6.0还是相机问题,等到这周末还未搞定相机的话,会先发一个尝鲜版,相机问题有些难搞,还在找原因。跟其他作者搞的6.0相机不是一个问题,
Click to expand...
Click to collapse
Wow! Can't wait for it!!

[ROM][UNOFFICIAL][6.0.1][SGP712/SGP771] ResurrectionRemix for Xperia Z4 Tablet[Alpha]

ResurrectionRemix M for Sony Xperia Z4 Tablet Wifi and LTE (SGP712/SGP771)​
Code:
Your warranty may be voided ! I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications.
Issues:
- Back camera focus: image is blurred and color problem (waiting for new AOSP blobs from Sony)
- Minor bug with led while charging
- No FM radio
- Tell me what you find !
How to install
- Unlock your bootloader (you can save your TA partition before)
- Update your firmware to the last Marshmallow version (needed to update the bootloader, kernel will not boot if you use the Lollipop bootloader)
- Install AndroPlus kernel and TWRP
- Make a backup
- Push the rom's zip to the SD card (optionnaly with gapps)
- Wipe System, Data, Cache, Dalvik cache
- Install the rom (and gapps if you want)
- Reboot
- Enjoy, and give me a feedback
Advice: You can use TWRP from Androplus before installing the rom. But it will not work with cyanogenmod/ResurrectionRemix kernel.
So, after installing the rom, you can use TWRP made for CM kernel (see the link bellow) and press vol+ at boot, or keep AndroPlus TWRP and use "fastboot boot boot.img", were boot.img is AndroPlus kernel.
Edit : my TWRP for CM seem to has a bug with touchscreem randomly not working, you can reboot the tablet with Power-Vol+ until the touchscreen works (it doesn't stop working after boot, it just works well or not at all), or use the fastboot method with AndroPlus Kernel.
I will solve this problem when I'll have the time.
Thanks
@CTXz and @zacharias.maladroit for all the work with the Z5 serie and the kitakami platform
To all people who helped them: @oshmoun, @moonbutt74, @sub77, @Joeisgood99, @bazhip, @alphatact1cs, @auras76, @Myself5
@AndroPlus for his great kernel and recovery
Sony’s AOSP team for providing sources for AOSP
CyanogenMod team, they are provinding a great android distribution
ResurrectionRemix team, they are provinding another great android distribution
Google for Android
All the people I don't explicitly thanks (You can ask if you think you should be on this list, I will add you with pleasure)
Downloads
ResurrectionRemix unofficial rom for karin windy (Z4 tablet wifi only)
https://www.androidfilehost.com/?w=files&flid=83577
ResurrectionRemix unofficial rom for karin (Z4 tablet LTE)
https://www.androidfilehost.com/?w=files&flid=86534
Gapps
http://opengapps.org/
Select ARM64, android 6,0, and choose the variant you want (I recommand pico)
TWRP for CM kernel for karin windy (both Z4 tablet wifi and LTE)
https://www.androidfilehost.com/?w=files&flid=114592
Questions
- Please, avoid asking things like: how to flash this rom, what is fastboot, …
There is enough documentation on XDA and others websites. You also probably should not use this rom if you don’t know how to recover a bricked device with fastboot and flashtool.
- I’m not a professional devlopper, I don’t receive payement for this, so don’t ask for ETA, for make a rom for an other devices, …
- I only have a wifi only Z4 tablet, I make a LTE version, but since I don’t own this tablet it’s not possible for me to debug like on my wifi tablet.
Reporting a bug
- Explain what happen with the more details you can: how does this bug happen, when, ...
- Share a log if you can
Source code:
Device
https://github.com/andralex8/android_device_sony_karin_windy
https://github.com/andralex8/android_device_sony_karin
https://github.com/andralex8/android_device_sony_kitakami
https://github.com/andralex8/android_device_sony_common
Kernel
https://github.com/andralex8/android_kernel_sony_kitakami
Vendor
https://github.com/andralex8/android_vendor_sony
https://github.com/andralex8/android_vendor_qcom
The remaining source code for the kitakami platform can be obtainde from here:
https://github.com/Sony-Kitakami
https://github.com/andralex8
ResurrectionRemix source code:
https://github.com/ResurrectionRemix
TWRP source code:
https://github.com/omnirom/android_bootable_recovery
Changelog
Code:
2016/11/25
- Increase max speaker sound
- Allow to set lower minimum brightness
- Sync last ResurrectionRemix sources (5.7.4)
2016/11/13
- Sync last ResurrectionRemix sources (5.7.4)
2016/09/18
(- Use cm libbt again)
2016/09/17
- Sync last ResurrectionRemix sources (5.7.3)
2016/08/21
- Fix USB OTG (disable switch on boot)
2016/08/20
- Sync last ResurrectionRemix sources (5.7.3)
2016/08/07
- Partially fix USB OTG (fix kernel usb driver)
- Use Adreno stock blobs (32.1.A.1.185)
- Sync last ResurrectionRemix sources (5.7.2)
2016/07/29
- CyanogenMod for SGP771 karin released
- ResurrectionRemix for SGP771 karin released (based on karin source code for CyanogenMod)
2016/07/23
- ResurrectionRemix for SGP712 karin_windy released (based on karin_windy source code for CyanogenMod)
2016/07/10
- Update qcom blobs (SW_binaries_for_Xperia_AOSP_M_v05a)
- Cpuquiet and rqbalance improvements (cherry-picking from sonyxperiadev)
2016/06/15
- Fix sensors
2016/06/14
- Fix bluetooth (use broadcom libbt from AOSP instead of CM)
2016/06/05
- Fix audio (add acdb and audio config from stock 32.1.A.1.185)
2016/05/29
- Cyanogenmod for SGP712 karin_windy released
XDA:DevDB Information
ResurrectionRemix M for Xperia Z4 Tablet, ROM for the Sony Xperia Z4 Tablet
Contributors
andralex8, and a lot more (see thanks section)
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: ResurrectionRemix
Version Information
Status: Alpha
Created 2016-07-23
Last Updated 2016-11-25
If you are the guys of RR for Nexus 6P .....I'm sooooo waiting for LTE version of this Rom SGP-711. I'm currently running MM 6.0.1 but this rom would make a huge difference.
Sent from my SM-G935T using Tapatalk
jongcruz said:
If you are the guys of RR for Nexus 6P .....I'm sooooo waiting for LTE version of this Rom SGP-711. I'm currently running MM 6.0.1 but this rom would make a huge difference.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
No, I don't know about the Nexus 6P guy .
I hope to make a version for LTE one day, and for CyanogenMod too.
There is a problem with the cm rom I tried for the LTE version making it unusable. Since I don't have a LTE tablet, I'm waiting to have more informations from people with the SGP771 who tried this rom (I need at least a logcat, and I will see what I can do ).
This other big problem for the roms (AOSP, CM, RR, ...) is currently the camera. It's the same for almost all recent Sony devices, we're waiting new binaries from Sony to fix this. And there is the usb otg to fix too.
But the remaining seem to work pretty well
andralex8 said:
No, I don't know about the Nexus 6P guy .
I hope to make a version for LTE one day, and for CyanogenMod too.
There is a problem with the cm rom I tried for the LTE version making it unusable. Since I don't have a LTE tablet, I'm waiting to have more informations from people with the SGP771 who tried this rom (I need at least a logcat, and I will see what I can do ).
This other big problem for the roms (AOSP, CM, RR, ...) is currently the camera. It's the same for almost all recent Sony devices, we're waiting new binaries from Sony to fix this. And there is the usb otg to fix too.
But the remaining seem to work pretty well
Click to expand...
Click to collapse
Those are great news, I'll remain waiting and ready to test anything that comes out in my LTE version. Thanks for this new development!
Sent from my SM-G935T using Tapatalk
jongcruz said:
Those are great news, I'll remain waiting and ready to test anything that comes out in my LTE version. Thanks for this new development!
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
If we want to acheive the result, we should help andralex. I think our task is to install cm again and get logcat via adb.
But will it work om brokem cm? Is root access required for logcat?
Is there any plans to develop a customized stock version?
Sent from my SGP771 using Tapatalk
alex009988 said:
If we want to acheive the result, we should help andralex. I think our task is to install cm again and get logcat via adb.
But will it work om brokem cm? Is root access required for logcat?
Click to expand...
Click to collapse
Good question! I think it don't need root, the logcat command worked for me as a simple user. The adb server should be already started on the tablet at the step when the rom crash, the only problem could be the secure debugging (you need to accept the computer's RSA key to have adb working). I don't know if the dialog will appeared, or if it will be possible to accept if the Trebuchet error stay on top.
It's possible to disable this security on build time, I will make that if it's not possible to accept the key.
jongcruz said:
Is there any plans to develop a customized stock version?
Click to expand...
Click to collapse
Not for the moment. I'm focusing on the roms built from sources. Maybe later if it's not possible to get fully working cm/rr roms (e.g. camera never works), but I don't think so.
Well, hope never dies.
Sent from my SGP771 using Tapatalk
There is my first ResurrectionRemix build for SGP771 :
https://www.androidfilehost.com/?fid=24659351692116030
It's not tested right now, but the CyanogenMod version for SGP771 works, so it should works .
I'll update the thread tomorow to support SGP771 (unless you tell me it's not working).
andralex8 said:
There is my first ResurrectionRemix build for SGP771 :
Click to expand...
Click to collapse
Thanks for creating the build for the SGP771!
I installed it a few hours ago on my device and, so far, seems stable and quite like it.
Please let me know if I can help you with the SGP771 testing (feedback, logs, etc). I'm very inexperienced in the build process but always willing to learn.
jlecour said:
Thanks for creating the build for the SGP771!
I installed it a few hours ago on my device and, so far, seems stable and quite like it.
Please let me know if I can help you with the SGP771 testing (feedback, logs, etc). I'm very inexperienced in the build process but always willing to learn.
Click to expand...
Click to collapse
Do you have LTE working OK?
Sent from my SGP771 using Tapatalk
jongcruz said:
Do you have LTE working OK?
Sent from my SGP771 using Tapatalk
Click to expand...
Click to collapse
I only now tested the SIM card slot and it does not even recognise when there is a card inserted, even after rebooting the device.
jlecour said:
Thanks for creating the build for the SGP771!
I installed it a few hours ago on my device and, so far, seems stable and quite like it.
Please let me know if I can help you with the SGP771 testing (feedback, logs, etc). I'm very inexperienced in the build process but always willing to learn.
Click to expand...
Click to collapse
jlecour said:
I only now tested the SIM card slot and it does not even recognise when there is a card inserted, even after rebooting the device.
Click to expand...
Click to collapse
Thank your for testing .
Could you send me a logcat with the SIM card inserted to see where this problem come from ?
@alex009988, I checked your logcat, it seem that on CyanogenMod the tablet can connect to mobile network (at least I saw a HSPA/3G+ connection and the device got an ip address from this network before connecting to wifi), can you confirm ?
Hi. Sim card works well, it can make calls and go online. I confirm it.
Interesting. I think it's not a bug, but maybe feature of aosp Sony sourses. So, IMHO, doesn't need to be fixed.
Cm on my tyblet calls all networks by the same name.
A attached screenshots from spg771 and xiaomi redmi note 2. My operator is tele2 on both devices.
PS I haven't checked for LTE cuz it's a bit far from my home. But I guess it should work.
andralex8 said:
Thank your for testing .
Could you send me a logcat with the SIM card inserted to see where this problem come from ?
@alex009988, I checked your logcat, it seem that on CyanogenMod the tablet can connect to mobile network (at least I saw a HSPA/3G+ connection and the device got an ip address from this network before connecting to wifi), can you confirm ?
Click to expand...
Click to collapse
@andralex8
I generated a logcat with a SIM card inserted and started the logging as soon as the system was up.
During the 3 or 4 min captured in the log I also extracted and inserted the SIM tray immediately after, in order to check if any event was logged.
I will also go through the log to see if there is anything obvious.
Hope this helps!
Sorry, duplicate post.
Joao_L said:
@andralex8
I generated a logcat with a SIM card inserted and started the logging as soon as the system was up.
During the 3 or 4 min captured in the log I also extracted and inserted the SIM tray immediately after, in order to check if any event was logged.
I will also go through the log to see if there is anything obvious.
Hope this helps!
Click to expand...
Click to collapse
How did you flash the ROM? With androplus recovery and factory reset(wipe)? Are you sure that sim card is not broken? With stock ROM, does it work? I think it's kinda impossible that one man have no problem with sim card and another have it with the same device.
alex009988 said:
How did you flash the ROM? With androplus recovery and factory reset(wipe)? Are you sure that sim card is not broken? With stock ROM, does it work? I think it's kinda impossible that one man have no problem with sim card and another have it with the same device.
Click to expand...
Click to collapse
I never got to try the SIM card slot while in stock ROM. Even though I have an LTE version it's not a feature I use.
Yes, I used TWRP: cleaned system, data and both cache partitions. Then had to side load the .zip file as I didn't have a micro SD card available. The installation was successful.
Prior to this I had installed an AOSP ROM compiled by me following Sony's instructions. However, as written before, all partitions were wiped before installing RR.
Just for my understanding: you have an SGP771 using this build of RR and your SIM card slot works?
Joao_L said:
I never got to try the SIM card slot while in stock ROM. Even though I have an LTE version it's not a feature I use.
Yes, I used TWRP: cleaned system, data and both cache partitions. Then had to side load the .zip file as I didn't have a micro SD card available. The installation was successful.
Prior to this I had installed an AOSP ROM compiled by me following Sony's instructions. However, as written before, all partitions were wiped before installing RR.
Just for my understanding: you have an SGP771 using this build of RR and your SIM card slot works?
Click to expand...
Click to collapse
Year, sim card work, but I use cm, try cm too. I haven't checked RR, but if need of course I will.

[ROM][PORT][SM-T585][SM-T580] TW Port 8.1 from P580/585 and T395

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Magisk (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and Magisk
Information
My port based on:
firmware: P580KXU1CRJ7 (Tab A with S PEN P580) Android 8.1 with October security patch
firmware: T395XXU3BRJ5 (Tab Active2) Android 8.1 with November security patch
kernel: J600GDXU1ARE2 (Galaxy J6 SM-J600F 2018) 3.18.14
Removed only knox and few features (nfc, fingerprint, radio)
P580/P585 port:
Work
all
Links
LTE version:
WiFi version:
1. 20181101: https://drive.google.com/file/d/1yaV7qPaUd0zxFycJYs6FnSrny8qVbOGm/view?usp=sharing
T395 port:
Work
almost all, this is port from the tablet to the tablet, no any issues with TW or keyboard as was before
Known Issues
- camera (flash working)
- auto brightness too dark
Links
LTE version:
2. 20181101: additional patch (remove crypt data\sdcard for easy backup/restore via TWRP, switch drm to L3 - no HD in netflix, but it's working): https://drive.google.com/file/d/1XyvMZlWq1KvEMxJmC8IVIqwDylDMrqs9/view?usp=sharing
1. 20181101: https://drive.google.com/file/d/1FHEFjwh1NO1mwYBQMIvumyxSO8w4TYYV/view?usp=sharing
WiFi version:
2. 20181101: additional patch (remove crypt data\sdcard for easy backup/restore via TWRP, switch drm to L3 - no HD in netflix, but it's working): https://drive.google.com/file/d/11NAAKHLHXrQuobytac7jDkRwpdh7dcwK/view?usp=sharing
1. 20181027: https://drive.google.com/file/d/1rcg_WGXeTqawv-ZyhL2_yuAaXZJvhPzo/view?usp=sharing
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870/
Thanks
Thanks to Samsung
How are you friend Valera! ?? First of all I appreciate this new port of samsung oreo. It is much better than the previous one due to the fact that it is from tablet to tablet. I installed it 2 hours ago and everything is wonderful, I'm probably my daily driver from now on. I will comment on bugs that I have found, some already mentioned in the OP. Camera does not work
- processing error when starting samsung account session
- blue filter
- gps seems to work
- I have a book cover and the screen does not turn on or off with the magnet
this is all for the moment, while I will continue watching a series in netflix with chromecast that works well in this rom, also the smart view. Thank you! It is a huge job!
Great ... I'm waiting port for t585 version. Good day!
which branch do you use ?? the TouchWiz-8.0? also if the book cover feature isn't working, i saw that the feature isn't enabled in your defcon.
Good morning!
I continue with this rom and it goes very well, but I have found one more problem and that is that the bluetooth is not activated.
Thank you very much for your great work!
Thanks man!!! Btw, can you add navbar? I reqlly would like to see ìt on a touchwizz rom for the tab a??
Nice work Valera. Waiting for t585 version hope you will fix camera also :good:
Hi all
Added port for lte version too.
Also I added small patch - I had remove encrypt data\sdcard, it's really annoying for me - I need backup\restore firmware, because I often back to los 15\16 and then back to port.
Rawwrius01 said:
which branch do you use ?? the TouchWiz-8.0? also if the book cover feature isn't working, i saw that the feature isn't enabled in your defcon.
Click to expand...
Click to collapse
Yes, kernel the same, as for port before.
I'll check cover, may be not today, havn't time at all right now, on weekend I'm sure will be a version.
silly request, a link to your twrp please. I have twrp 3.1.1 on my T585 now, will it work ok?
bobfrantic said:
silly request, a link to your twrp please. I have twrp 3.1.1 on my T585 now, will it work ok?
Click to expand...
Click to collapse
should be enough
Today there was a new stock 8.1 firmware for the P580 (same as our but with s-pen). This is our related tablet with same hardware. As result now we have ideal fully worked port. Right now for T580 only, soon I'll finish it for T585.
This is good, and I hope soon we will get original stock firmware too.
Another great news... btw spen futures can be removed? Because it is unuseful for T585.
On Sammobile you can download original 8.1 FW for p580, p585.
Valera1978 said:
Today there was a new stock 8.1 firmware for the P580 (same as our but with s-pen). This is our related tablet with same hardware. As result now we have ideal fully worked port. Right now for T580 only, soon I'll finish it for T585.
This is good, and I hope soon we will get original stock firmware too.
Click to expand...
Click to collapse
I am struggling to get the ROM working on my p580. With Odin it works but when I make a flash able zip with superr kitchen it stuck at the boot screen. Also the twrp isn't working. How do you got your twrp working on Oreo ?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Oh Valera! why do you do it? LOL
Just kidding! You make me after a tired day of studies in the middle of the night I put to flash my tablet! Hahaha
The port from the Tab P580 must surely go even better, so I'll download it right away, thank you very much for all your great work!
And apparently the official rom oreo for our Tab A T580 / 585 will be launched soon, or so we hope. Maybe this will help future development.
Thank you very much Valera!
Valera1978 said:
Today there was a new stock 8.1 firmware for the P580 (same as our but with s-pen). This is our related tablet with same hardware. As result now we have ideal fully worked port. Right now for T580 only, soon I'll finish it for T585.
This is good, and I hope soon we will get original stock firmware too.
Click to expand...
Click to collapse
It's getting exciting!!
Of course, rom flashed on my tab T580, this version of the P580 works great, I did not find a single error. Thank you very much for this great work.
It is very fast, there is more ram available with respect to nougat, I really love it, new daily driver!
Greetings Valera and thanks for everything
The first problem that is detected so far is that the bluetooth is not activated
Yeah, bluetooth won't turn on in the P580 port.
Waiting for lte version

[ROM][SM-T825][UNOFFICIAL] LineageOS 16.0 | Android 9.0 20191024

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Known Issues:
- speakers during calls
- camera can be buggy, it's work, but some errors in logcat in isp module
Few notes about initial release:
- the config and the vendor has been re branded
- the kernel has been updated to the last caf kernel LA.UM.7.5.r1-04000-8x96.0 (December 27, 2018). our original samsung kernel based on LA.UM.6.5.r1-05300-8x96.0 (January 04, 2018). I spent 2 weeks to make it work. It was really intersting experience
Links:
LineageOS Builds:
10. 20191024: october security patch: https://drive.google.com/file/d/1Dhbk78CTdMoZ-g51xB1Y3ShF2whEnIIb/view?usp=sharing
9. 20190913: update to new stock pie kernel T820XXU3CSH9, almost all proprietary files from pie stock: https://drive.google.com/file/d/1EgXDbl9rk4FohLUU8_wxRL2UNXYsK95k/view?usp=sharing
if you not updated the tablet and use old bootloader - for correct work fingerprint\sensors after install lineage you need install the next file: https://drive.google.com/file/d/1eDn1_pgW1wJGXUibjv53ytSmtJINNVZY/view?usp=sharing
8. 20190812: experimental firmware: august security patch + review overlay, update adreno driver and some proprietary files, fix otg: https://drive.google.com/file/d/1tOAh38CYqSXhiUTHKKvUMZJS67MGCaU0/view?usp=sharing
7. 20190811: august security patch: https://drive.google.com/file/d/1jZZlNJNEyC7fmGBJ_a--p-kLhj92v7Or/view?usp=sharing
6. 20190707: july security patch: https://drive.google.com/file/d/1r4qV8kZhk-uFJyICHMiMuAwseDWKIy3l/view?usp=sharing
5. 20190518: https://drive.google.com/file/d/1-5w8pH7xCtTVDIY3VedHzl0-dvLs7n1u/view?usp=sharing
4. 20190331: update keystore, if you update from version before - in recovery remove /data/system/locksettings.db: https://drive.google.com/file/d/1GzyFgekBYM6aXDfmnpiDlQRrtsL9bT8e/view?usp=sharing
3. 20190327: https://drive.google.com/file/d/1GRgDIA3SIExafmYx81VeRqU7W-rplCZg/view?usp=sharing
2. 20190319: https://drive.google.com/file/d/1eo5t6qBXDkU4OxZCPtd32LjiXAk3-REy/view?usp=sharing
1. 20190211: https://drive.google.com/file/d/1LJ-jO_3PmIoXebUKkLqFgG1ju_pzfFud/view?usp=sharing
TWRP:
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack: https://drive.google.com/file/d/1KyX6xZ8WrcNyHo73-lHhU2dZjX0KFJc1/view?usp=sharing
Gapps:
http://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any, usually I'm using micro or nano
P.s. gapps wizard still buggy in lineage, it can crash
Sources:
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8996
Device: https://github.com/Valera1978/android_device_samsung_gts3llte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gts3llte
Thanks
Thanks to LineageOS team
Hi all
I have not been here for a long time, there were many different projects.
For the last 2 months my main priority has been to run the pie on tab s3. It was not very easy. First, I spent a lot of time on sensors, then I spent 2 weeks on the caf kernel, and then a huge amount of time on the ril. a week ago everything was ready, but there were big problems with stability, as a result, after 20-30 builds, today I managed to solve all the problems. I tested the firmware a bit, it looks exactly the way I wanted - everything is fast and smooth.
This is great. Thank you!
Any chance you can build for t820?
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Known Issues:
- speakers during calls
- camera can be buggy, it's work, but some errors in logcat in isp module
Few notes about release:
- the config and the vendor has been re branded
- the kernel has been updated to the last caf kernel LA.UM.7.5.r1-04000-8x96.0 (December 27, 2018). our original samsung kernel based on LA.UM.6.5.r1-05300-8x96.0 (January 04, 2018). I spent 2 weeks to make it work. It was really intersting experience
Links:
LineageOS Builds:
1. 20190211: https://drive.google.com/file/d/1LJ-jO_3PmIoXebUKkLqFgG1ju_pzfFud/view?usp=sharing
TWRP:
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack: https://drive.google.com/file/d/1KyX6xZ8WrcNyHo73-lHhU2dZjX0KFJc1/view?usp=sharing
Gapps:
http://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any, usually I'm using micro or nano
P.s. gapps wizard still buggy in lineage, it can crash
Sources:
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8996
Device: https://github.com/Valera1978/android_device_samsung_gts3llte
Vendor: https://github.com/Valera1978/android_vendor_samsung_gts3llte
Thanks
Thanks to LineageOS team
Click to expand...
Click to collapse
Why don't we have android 9.0 for Tab S3? That. Is my question.
Valera1978 said:
Hi all
I have not been here for a long time, there were many different projects.
For the last 2 months my main priority has been to run the pie on tab s3. It was not very easy. First, I spent a lot of time on sensors, then I spent 2 weeks on the caf kernel, and then a huge amount of time on the ril. a week ago everything was ready, but there were big problems with stability, as a result, after 20-30 builds, today I managed to solve all the problems. I tested the firmware a bit, it looks exactly the way I wanted - everything is fast and smooth.
Click to expand...
Click to collapse
Thank you very much for your work on the T825 and congratz on solving the issues!
Sadly I'm another one of those hijacking T820 users. I'd be very happy to help you bring your work to the T820, too. If you need somebody to test T820 builds: please feel free to contact me.
666anoymous666 said:
Why don't we have android 9.0 for Tab S3? That. Is my question.
Click to expand...
Click to collapse
The official one ui update for the tab s3 will come only and the end of the year
Thank you so much for your hard work @Valera1978, please do not abandon the project, you are doing a great job for us all owners of galaxy tab s3
Great job! Thank you so much!
I was waiting for this great news.
Hi,
this ROM is great, very smooth and stable - thank you very much.
The only thing which doesn't work is USB-OTG
I tried to bypass with android.hardware.usb.host.xml, i tried the OTG-Enabling Module for Magisk, but no USB-Device is recognized by the tablet - except the connected Windows-PC.
Also in TWRP USB-OTG does not work.
Does anybody know a workaround?
Looks like the OP is a post and go
c_86 said:
Looks like the OP is a post and go
Click to expand...
Click to collapse
Maybe just not the time to check in here or reply daily. We will see.
Now I installed crDroid, same error. Therefore, I think the error is actually TWRP. After installing TWRP, the tablet stops responding to plugged-in USB devices, except the PC ...
Ralfi said:
Hi,
this ROM is great, very smooth and stable - thank you very much.
The only thing which doesn't work is USB-OTG
I tried to bypass with android.hardware.usb.host.xml, i tried the OTG-Enabling Module for Magisk, but no USB-Device is recognized by the tablet - except the connected Windows-PC.
Also in TWRP USB-OTG does not work.
Does anybody know a workaround?
Click to expand...
Click to collapse
My construction with usb(otg)-microusb + microusb-type-c dnw even on my phone (xiaomi mi8). Original usb(otg)-type-c still on the way to me from aliexpress. When it arrive (hope 1-2 weeks) - i'll check it.
VVombat said:
Maybe just not the time to check in here or reply daily. We will see.
Click to expand...
Click to collapse
Yes, sorry was hard last week, and worked on weekend.
Time was only for release note pro 12.2 pie.
Few notes about tablet t820 (wifi version):
I have another tablet (tab a t585) - it's exynos 7870 and lte\wifi version completely the same. Differ only in gps.
But with t820\825 all much-much more harder. Time ago we (i'm and bonuzzz) tried to merge vendor for both tablets, but no luck.
Samsung made different vendor, initial scripts, links. Without tablet I cann't do anything.
Good news: most likely in March I will get a t820 and I will have few weeks for bring lineage too.
Valera1978 said:
Good news: most likely in March I will get a t820 and I will have few weeks for bring lineage too.
Click to expand...
Click to collapse
Thx for clarifying the difficulties! And thx for making hope....so good news! I'm really lookwing forward - as the S3 seems to be the last Samsung 4:3 device, it deserves passion
Thank you for the rom, i am really happy with it! It works perfect for daily use, no major battery drain, pen works too! Two minor bugs:
1. The tablet freezes and restarts after display wake up if you only enter the sim pin after restart but not the unlock pin.
2. The tablet always wakes up with the same luminance.
It is so much faster than the Samsung garbage...
Valera1978 said:
Good news: most likely in March I will get a t820 and I will have few weeks for bring lineage too.
Click to expand...
Click to collapse
This is indeed very good news! Looking forward to it! If you need any help testing, just message me.
Wow man, I just dusted off my Tab S3 that has been collecting dust since it came out... Amazing job, just amazing! Thanks. The tablet is finally useable.
Valera1978 said:
Yes, sorry was hard last week, and worked on weekend.
Time was only for release note pro 12.2 pie.
Few notes about tablet t820 (wifi version):
I have another tablet (tab a t585) - it's exynos 7870 and lte\wifi version completely the same. Differ only in gps.
But with t820\825 all much-much more harder. Time ago we (i'm and bonuzzz) tried to merge vendor for both tablets, but no luck.
Samsung made different vendor, initial scripts, links. Without tablet I cann't do anything.
Good news: most likely in March I will get a t820 and I will have few weeks for bring lineage too.
Click to expand...
Click to collapse
This would be so awesome if you could do something for our T820! Havoc OS on this device would be a dream! :angel:
thank you for your great work. I hope you manage to fix OTG

[ROM][UNOFFICIAL][j7popltespr][9.0.0] LineageOS 16.0 [BETA]

LineageOS is an AOSP based Pie ROM, with contributions from members of the Android community.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Bugs:
Camera/Camcorder
Selinux is permissive
Audio volume steps don't work
You tell me
What works:
Boots
Audio (Recording/Playback)
Video Playback
GPS
Wifi
Bluetooth
FM Radio
In-Call Audio
RIL (NOTE: You must go into Settings, and follow this: (Network & Internet) -> (Mobile Network) -> (Advanced) -> (Carrier Settings). This will fix things for one reason or another.)
Installation Instructions:
First off, make sure you are running the latest TWRP. It will be continually updated with support for this ROM's features.
Secondly, ensure at the very least, you are on a recent update. If you are not, then flash the stock ROM via Odin, and perform a system update.
Thirdly, this ROM is ONLY for the SM-J727P, also known as j7popltespr, or the J7 2017 Snapdragon.
Perform a factory reset in TWRP
Select advanced settings under 'Wipe', and wipe 'System'
Flash the LineageOS 16.0 ROM
Install any other modifications (OpenGApps (Platform ARM64, Ver. 9.0.0), and/or Magisk)
Wipe Dalvik & Cache
Reboot and wait
Downloads:
LineageOS 16.0:
https://www.androidfilehost.com/?fid=1899786940962576314
TWRP:
https://forum.xda-developers.com/galaxy-j7/development/recovery-twrp-3-1-1-x-galaxy-j727p-t3692663
Be sure to hit that thanks button to show that you support this development and/or donate to me via my PayPal, [email protected]
XDA:DevDB Information
LineageOS 16.0 (j7popltespr), ROM for the Samsung Galaxy J7
Contributors
minz1
ROM OS Version: 9.x Pie
ROM Firmware Required: O Firmware
Based On: LineageOS
Version Information
Status: Beta
Created 2019-09-05
Last Updated 2019-09-05
NOTE: I will likely not be releasing any more Lineage 16.0 builds for the J7. I wanted to get something stable out, but unfortunately some of the bugs require far more effort to resolve. This build is probably the best working one to date, so that's what's released. I hope you enjoy!
minz1 said:
NOTE: I will likely not be releasing any more Lineage 16.0 builds for the J7. I wanted to get something stable out, but unfortunately some of the bugs require far more effort to resolve. This build is probably the best working one to date, so that's what's released. I hope you enjoy!
Click to expand...
Click to collapse
Hi , nice work there ...
just wondered if this can be ported to c7 pro coz both have similar soc ( Qualcomm MSM8953-Pro Snapdragon 626) and have common vendor ... :laugh:
Regards
jesvi said:
Hi , nice work there ...
just wondered if this can be ported to c7 pro coz both have similar soc ( Qualcomm MSM8953-Pro Snapdragon 626) and have common vendor ... :laugh:
Regards
Click to expand...
Click to collapse
We do not have a maintainer for the C7 Pro currently, but it is possible.
Hi,i'm sasi2006166 and i want to join your "team", yes i know how to build roms in fact u can see many of my threads in j7 2016 exynos7870 section, thanks
I got it to work but not internet . I went back to 8.1. However even after I formatted and swiped everything my phone only says have 8 gigs of storage with only 2.5 available . This only happened after flashing this rom a few times . Any idea how to fix this so phone recognizes 16 gig ? Oh and btw your rom is cool and when I have more experience may put it back on . Thank you for all your great work on J7 , I love this phone !
@Tigerevo Hello, can you give us detail about how you restored to the stock ROM 8.1? Did you use TWRP backup or do you use ODIN to flash your phone?
---------- Post added at 03:58 AM ---------- Previous post was at 03:50 AM ----------
@minz1 I think I have I faint idea of what is causing the camera to misbehave, as I noted in another post about the quirks of the Oreo ROM in the J7 Perx, if you uninstall the stock Messages app or the Contacts app, it automatically ruin your camera, both front and rear making it unable to work while summoning any app that require them, it doesn't make the app crash or anything, it just show a black viewfinder unable to make it take a shot or record video, not even the flash. As for the LTE or by default 3G Internet, it's unfortunate that there are no open source for the Snapdragon 625 modem or binary blobs going around to interface with it. But all in all very smooth and nice running ROM for an initial Android 9.0 port to the J7 Perx
I formatted and swiped system . I then used odin.
---------- Post added at 06:34 PM ---------- Previous post was at 06:33 PM ----------
Oh and somehow someway my phone recognized the full 16 gigs today
---------- Post added at 06:35 PM ---------- Previous post was at 06:34 PM ----------
Oh and somehow someway my phone recognized the full 16 gigs today
ROM Has Random Shutdowns Changed To New Battery So It's Not The Battery
YouTube Doesn't Load Or Snapchat
Everything Else Works Fine Its Just Those That I Came Across And The Ones You Mentioned
Bluetooth Connects But Audio Still Plays Through The Phone
YouTube Doesnt Work Or Snapchat,Instagram Can't Post Anything
Music Cause Phone To Reboot As Well After A Couple Of Skips The Phone Shutsdown And Reboots To Recovery
Scrolling Down Instagram And Sharing Posts Causes A Reboot To Recovery
Flashed to j727r4 and working with same bugs as mentioned. Had to flash the j7popltespr lineage 14.1 prior to flashing lineage build 16 in order for system to boot. Not sure why. Also magisk 20.0 prevents system from booting as well. Magisk 18.1 on the other hand is working. Crossing fingers for a working lineage 17.0 ?
ct760ster said:
@Tigerevo Hello, can you give us detail about how you restored to the stock ROM 8.1? Did you use TWRP backup or do you use ODIN to flash your phone?
Try using this twrp backup . https://forum.xda-developers.com/galaxy-j7-2017/how-to/twrp-backup-j7-perx-sm-j727p-rooted-t3993843
---------- Post added at 08:52 PM ---------- Previous post was at 08:50 PM ----------
Nulati said:
Flashed to j727r4 and working with same bugs as mentioned. Had to flash the j7popltespr lineage 14.1 prior to flashing lineage build 16 in order for system to boot. Not sure why. Also magisk 20.0 prevents system from booting as well. Magisk 18.1 on the other hand is working. Crossing fingers for a working lineage 17.0
Click to expand...
Click to collapse
Try Magisk 19.2 !
Click to expand...
Click to collapse
help i cant get acess to carrer setting
Imei are there everthing is fine .just cant get service
Minz any idea ?
SaraO7 said:
help i cant get acess to carrer setting
Imei are there everthing is fine .just cant get service
Minz any idea ?
Click to expand...
Click to collapse
Same problem here, grayed out options, these posts are within a few days of each other but surely this isn't something new... then again, if it is (something new), should it be taken to mean that there are indeed 'new' issues/features? Boy, now we're cooking with gasoline!
This is a solid rom, but my 'good phone' decided it needed to be in the bath (I'd already told it to be BY the bath, awaiting my requests) so now I'm all like: mllmlmm, you know? And don't even get me STARTED on spending money. Psht!
krbzzr said:
Same problem here, grayed out options, these posts are within a few days of each other but surely this isn't something new... then again, if it is (something new), should it be taken to mean that there are indeed 'new' issues/features? Boy, now we're cooking with gasoline!
This is a solid rom, but my 'good phone' decided it needed to be in the bath (I'd already told it to be BY the bath, awaiting my requests) so now I'm all like: mllmlmm, you know? And don't even get me STARTED on spending money. Psht!
Click to expand...
Click to collapse
Lol that funny and sad at the same time
It is easy fix why just @minz1 fix it and send us zip file . I dont think this will be hard for him .
I want to learn how to make my own rom to fix my own problems and don't wait like fool to fix it :fingers-crossed:
SaraO7 said:
Lol that funny and sad at the same time
It is easy fix why just @minz1 fix it and send us zip file . I dont think this will be hard for him .
I want to learn how to make my own rom to fix my own problems and don't wait like fool to fix it :fingers-crossed:
Click to expand...
Click to collapse
As the developer stated in her post, this ROM will not get further updates or end up as a final release because the burden to fix those bugs are unsurmontable for a single person. Let's behave as civilized people and not start talking nonsense to just pan handle some free meal.
ct760ster said:
As the developer stated in her post, this ROM will not get further updates or end up as a final release because the burden to fix those bugs are unsurmontable for a single person. Let's behave as civilized people and not start talking nonsense to just pan handle some free meal.
Click to expand...
Click to collapse
Yeah it is free meal .but it is professional website .and should have good staff ..not every free meal should be bad ..I don't say this is bad post or bad ROM ..I said why not just response to our problems we don't want update ..just fix this only bug and it will be very good professional free meal
any
can you fix any bugs it a really good rom please fix man :crying::crying::crying::crying::crying::crying:
Is it works on sm-j727s ?
Nulati said:
Flashed to j727r4 and working with same bugs as mentioned. Had to flash the j7popltespr lineage 14.1 prior to flashing lineage build 16 in order for system to boot. Not sure why. Also magisk 20.0 prevents system from booting as well. Magisk 18.1 on the other hand is working. Crossing fingers for a working lineage 17.0 ?
Click to expand...
Click to collapse
Is sm-j727r4 exynos 7870 model? I want to flash this lineageos file on my sm-j727s.

Categories

Resources