hi
i recently rooted by phone successfully using highonanriod 5.1.1 method after it successfully working then after installing a new launcher from google play store my phone crashed (approx 37 hours after rooting) i tried smart switch update installation it rushes through all the way finishes then i got firmware updater unknown error happened a couple of times then i downloaded stock 5.1. rom of samsmobile and flashed that to my phone then is just stayed on Samsung first screen i restarted the phone via vol down plus and entered download menu
and it says
Odin mode
product name: SM-G920F
CURRENT BINARY : Samsung official
SYSTEM STATUS: CUSTOM
SECURE DOWNLOADED: Enabled
Reactivation lock: off
knox warranty void 1 (0x500)
RP SWREV: B: 3 K: 2 S:2
I have tried to flash twrp but get recovery is not seandriod enforcing and even when i flash stock i cant access recovery stock basically vol up +home+ pwr button doesn't do anything
i have tried flashing stock 5.1
i have prepacked everything with stock ap,bl,cp csc and even the pit file
my phone isn't seen by adb i run out of ideas and i tried everything i cant fix it if i cant fix this then i basically will have no phone i i used all my spare cash getting the s6 .
pls help
if i posted in the wrong forum pls move (i am noobie to xda)
techwax said:
pls help
if i posted in the wrong forum pls move (i am noobie to xda)
Click to expand...
Click to collapse
On Smart Switch use the option Emergency software recovery and initialization.
When you conect un odin what say?? You try to use odin for install stock room?
Hello everyone, I am new here, and I want to ask omething, after I turned off my Samung J7 Prime (Trying to restart it), it diddnt restart and says "Custom Binary Blocked by FRP Lock", I have stock rom odin in diffrent versions, i thried them but they fail, I saw in one thread that you need to Reformat your device, but when I am trying, to go to recovery mode, It says Recovery is Not Seandroid Enforcing, I cant use Recovery mode, I tried download mode but its blocked by FRP Lock so I cant use or flash orreformat my device, I hope I dont get ****ed! Please help really need all your help! Thank you, Hope my phone gets fixed!
" It all started when I turned off oem unlock and rebooted m phone"
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
abhinavp649 said:
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
Click to expand...
Click to collapse
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Im sorry but It diddnt work.
Also I cannot access my recovery mode It says RECOVERY IS NOT SEANDROID ENFORCING.
MakiBaka30 said:
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Click to expand...
Click to collapse
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
abhinavp649 said:
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
Click to expand...
Click to collapse
Wait, I will check, but just to make sure what kind of file should a stock rom be?
MakiBaka30 said:
Wait, I will check, but just to make sure what kind of file should a stock rom be?
Click to expand...
Click to collapse
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
abhinavp649 said:
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
Click to expand...
Click to collapse
Ok tnx, I will Check
Hey Its J7 Prime with nnon removable battery ...... Actually I turned off oem lock and restarted the phone with custom rom ........ and its says custom binary blocked by frp lock and when i unbrick using odin ...... it is also not installing ....... in the download mode also displays the same message ...... please bro help me....:crying::crying::crying::crying::crying:
Search for your stock roms here
https://updato.com/firmware-archive-select-model
https://www.sammobile.com/firmwares/
Hi all, it's been a while! I have a Galaxy J3 (2016) that is in development to be used for purposes other than a phone, and has a custom Android 5.1.1 on it. I am trying to see if it is possible to either install the stock ROM or flash TWRP and a custom ROM but am running into some issues. I found TWRP for this model and when I tried to install it through ODIN, the operation failed after a few seconds and the phone displayed "MDM mode. Can't download". I tried factory resetting through the recovery and it said MDM mode didn't allow factory reset. I booted up the system and turned on developer mode, but everything in the developer mode menu is grayed out so I couldn't factory reset using that method either. Does anyone know how to go about removing this "MDM mode"? I did some research and didn't really find any solutions. Any help is appreciated!
bump
same issuie
Have the same problem
I am looking into using ADB sideload/fastboot methods instead since the bootloader is locked-out from the MDM. Does anyone know if there are any ADB/fastboot methods of enabling USB debugging manually through a stock recovery??
Help needed please!!
rtrofimovich said:
Hi all, it's been a while! I have a Galaxy J3 (2016) that is in development to be used for purposes other than a phone, and has a custom Android 5.1.1 on it. I am trying to see if it is possible to either install the stock ROM or flash TWRP and a custom ROM but am running into some issues. I found TWRP for this model and when I tried to install it through ODIN, the operation failed after a few seconds and the phone displayed "MDM mode. Can't download". I tried factory resetting through the recovery and it said MDM mode didn't allow factory reset. I booted up the system and turned on developer mode, but everything in the developer mode menu is grayed out so I couldn't factory reset using that method either. Does anyone know how to go about removing this "MDM mode"? I did some research and didn't really find any solutions. Any help is appreciated!
Click to expand...
Click to collapse
Hi
I have the same problem here, did you managed to find a solution??
Please let me know asap
Thanks
snsmosko said:
Hi
I have the same problem here, did you managed to find a solution??
Please let me know asap
Thanks
Click to expand...
Click to collapse
Not yet. I haven't had much time to play with it lately, work is keeping me busy elsewhere
I need help in bypassing the FRP lock on my phone.
I can no longer access the recovery(vol up + power + home) of my phone.
When I try to flash stock firmware thru Odin(v.3.12.7) it is coming up with "Custom Binary(BOOT) Blocked By FRP Lock"
I already tried using Device Initialization & Emergency Software recovery thru Smart switch but it is not recognizing my phone.
I have attach some photos of the problem FYR.
Hope someone can provide a solution to revive my phone.
BUMP
BUMP
BUMP
My samsung galaxy SM-J600G doesnt turn on, when i try to switch it on it shows "Custom Binary blocked by FRP lock". I looked it up online and the only fix is to flash the stock rom back on(i have installed pixel experience and have orange fox recovery on). But the problem is i am unable to enter download mode. It shows the same error when i use the button combinations for download mode, futhermore if i plug it into my PC it just continues to bootloop and again shows the same "Custom Binary blocked by FRP lock" error. Is there anyway i can enter download mode?
DKBJ said:
My samsung galaxy SM-J600G doesnt turn on, when i try to switch it on it shows "Custom Binary blocked by FRP lock". I looked it up online and the only fix is to flash the stock rom back on(i have installed pixel experience and have orange fox recovery on). But the problem is i am unable to enter download mode. It shows the same error when i use the button combinations for download mode, futhermore if i plug it into my PC it just continues to bootloop and again shows the same "Custom Binary blocked by FRP lock" error. Is there anyway i can enter download mode?
Click to expand...
Click to collapse
Your recovery should offer an option to reboot to Download
Flash using lates firmware done