My samsung galaxy SM-J600G doesnt turn on, when i try to switch it on it shows "Custom Binary blocked by FRP lock". I looked it up online and the only fix is to flash the stock rom back on(i have installed pixel experience and have orange fox recovery on). But the problem is i am unable to enter download mode. It shows the same error when i use the button combinations for download mode, futhermore if i plug it into my PC it just continues to bootloop and again shows the same "Custom Binary blocked by FRP lock" error. Is there anyway i can enter download mode?
DKBJ said:
My samsung galaxy SM-J600G doesnt turn on, when i try to switch it on it shows "Custom Binary blocked by FRP lock". I looked it up online and the only fix is to flash the stock rom back on(i have installed pixel experience and have orange fox recovery on). But the problem is i am unable to enter download mode. It shows the same error when i use the button combinations for download mode, futhermore if i plug it into my PC it just continues to bootloop and again shows the same "Custom Binary blocked by FRP lock" error. Is there anyway i can enter download mode?
Click to expand...
Click to collapse
Your recovery should offer an option to reboot to Download
Flash using lates firmware done
Related
Hello everyone, I am new here, and I want to ask omething, after I turned off my Samung J7 Prime (Trying to restart it), it diddnt restart and says "Custom Binary Blocked by FRP Lock", I have stock rom odin in diffrent versions, i thried them but they fail, I saw in one thread that you need to Reformat your device, but when I am trying, to go to recovery mode, It says Recovery is Not Seandroid Enforcing, I cant use Recovery mode, I tried download mode but its blocked by FRP Lock so I cant use or flash orreformat my device, I hope I dont get ****ed! Please help really need all your help! Thank you, Hope my phone gets fixed!
" It all started when I turned off oem unlock and rebooted m phone"
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
abhinavp649 said:
you have to flash a stock firmware for your device to fix this mess up, to that you have to download the firmware according to your device's exact model and flash it under download mode.
you said you cant access download mode but i dont think if there is a possibility of lock down of Download mode by frp. First Remove the Battery and place it back to make sure it is completely switched off then Try again to enter Download mode.
press: Volume down+home+power buttons simultaneously for 5 or more seconds until the blue download screen appears.
then connect it to odin to flash the stock rom you downloaded.
hope this will fix your issue.
hit thanks if helped..
Click to expand...
Click to collapse
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Im sorry but It diddnt work.
Also I cannot access my recovery mode It says RECOVERY IS NOT SEANDROID ENFORCING.
MakiBaka30 said:
Sorry But my battery cannot be removed, also i can access download mode but when i flash my stock rom I says "Custom Binary(BOOT) blocked by FRP Lock"
Click to expand...
Click to collapse
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
abhinavp649 said:
Strange, if you have a stock boot image then why its still blocking it. is it a backup or you downloaded the image from internet. if downloaded make sure that it matches exactly with your device's model.
Click to expand...
Click to collapse
Wait, I will check, but just to make sure what kind of file should a stock rom be?
MakiBaka30 said:
Wait, I will check, but just to make sure what kind of file should a stock rom be?
Click to expand...
Click to collapse
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
abhinavp649 said:
when flashing with odin you just have one file in the package ending with .tar.md5 all the images required like recovery, boot, system, etc exist in that file itself.
Click to expand...
Click to collapse
Ok tnx, I will Check
Hey Its J7 Prime with nnon removable battery ...... Actually I turned off oem lock and restarted the phone with custom rom ........ and its says custom binary blocked by frp lock and when i unbrick using odin ...... it is also not installing ....... in the download mode also displays the same message ...... please bro help me....:crying::crying::crying::crying::crying:
Search for your stock roms here
https://updato.com/firmware-archive-select-model
https://www.sammobile.com/firmwares/
I have huge problem with my SM-T813. The FRP lock is on; after it receives automatic Samsung software update it cannot boot. It stuck on "Samsung Galaxy Tab S2 Powered by Android" and then it turns off. It cannot go to Recovery Booting (to go back factory reset) ... well after "Recovery Booting" appears, "Installing system update" appears for 20 seconds then it turns off. It can go to Download Mode, however when I try to flash the Stock ROM (.tar or .tar.md5 files downloaded from Sammobile) with Odin, well I have tried many many times the result is always failure. Written in red: "SECURE CHECK FAIL: recovery. Blocked by FRP Lock." I tried to flash the hidden.img.tar with Odin3, on Odin3 "PASS" but in reality my SM-T813 is still facing the exact same problem after this flashing. What should I do, please help. Than you very much.
dama0002 said:
I have huge problem with my SM-T813. The FRP lock is on; after it receives automatic Samsung software update it cannot boot. It stuck on "Samsung Galaxy Tab S2 Powered by Android" and then it turns off. It cannot go to Recovery Booting (to go back factory reset) ... well after "Recovery Booting" appears, "Installing system update" appears for 20 seconds then it turns off. It can go to Download Mode, however when I try to flash the Stock ROM (.tar or .tar.md5 files downloaded from Sammobile) with Odin, well I have tried many many times the result is always failure. Written in red: "SECURE CHECK FAIL: recovery. Blocked by FRP Lock." I tried to flash the hidden.img.tar with Odin3, on Odin3 "PASS" but in reality my SM-T813 is still facing the exact same problem after this flashing. What should I do, please help. Than you very much.
Click to expand...
Click to collapse
Try to obtain your device pit file
And then reparation your device through Odin and fish back your stock rom
Not that easy, mate. I had tried it 10 times and always failed. The FRP lock blocks it and almost everything else.
dama0002 said:
I have huge problem with my SM-T813. The FRP lock is on; after it receives automatic Samsung software update it cannot boot. It stuck on "Samsung Galaxy Tab S2 Powered by Android" and then it turns off. It cannot go to Recovery Booting (to go back factory reset) ... well after "Recovery Booting" appears, "Installing system update" appears for 20 seconds then it turns off. It can go to Download Mode, however when I try to flash the Stock ROM (.tar or .tar.md5 files downloaded from Sammobile) with Odin, well I have tried many many times the result is always failure. Written in red: "SECURE CHECK FAIL: recovery. Blocked by FRP Lock." I tried to flash the hidden.img.tar with Odin3, on Odin3 "PASS" but in reality my SM-T813 is still facing the exact same problem after this flashing. What should I do, please help. Than you very much.
Click to expand...
Click to collapse
Try to boot to download mode
and flash your stock rom via samsung odin
Hi
I recently rooted a Galaxy J5 500FN , and one morning when I turned on the device it didn't start up, but instead says "CUSTOM BINARY BLOCKED BY FRP LOCK" ; I googled around and found fix'es for it to reflash stock rom via Odin in Download mode...
So I tried that a few times, but every time I try to flash in odin the phone says "MDM MODE CAN'T DOWNLOAD"
How can I disablre MDM mode?? , OR at least another suggestion to fix the frp lock.............
PLEASE HELP!!!
Thanks
snsmosko said:
Hi
I recently rooted a Galaxy J5 500FN , and one morning when I turned on the device it didn't start up, but instead says "CUSTOM BINARY BLOCKED BY FRP LOCK" ; I googled around and found fix'es for it to reflash stock rom via Odin in Download mode...
So I tried that a few times, but every time I try to flash in odin the phone says "MDM MODE CAN'T DOWNLOAD"
How can I disablre MDM mode?? , OR at least another suggestion to fix the frp lock.............
PLEASE HELP!!!
Thanks
Click to expand...
Click to collapse
Where did you get this phone? MDM lock should be belong to a companies or phone retail store (which has the retail mode with the MDM )
please tell more. I am still looking for the solutions.
its unlocked(G935u) and i buy it from ebay.com
now after OTA update my phone stuck at download mode
Some times recovery mode can access but my volume down,up and power keys are not responding to taps
but touch screen is working
i had downloaded G935U from Updato.com and flashed using odin 3.13
ODIN says you pass flashing with a green box,no error during flashing but my phone never boot up
when try to go into recovery mode
android symbol comes and give a message 32% erasing and turn off
if i again force fully try to turn on stuck at samsung s7 edge logo with blue lines on top"recovery mode" in small letters.
Jaise joy said:
its unlocked(G935u) and i buy it from ebay.com
now after OTA update my phone stuck at download mode
Some times recovery mode can access but my volume down,up and power keys are not responding to taps
but touch screen is working
i had downloaded G935U from Updato.com and flashed using odin 3.13
ODIN says you pass flashing with a green box,no error during flashing but my phone never boot up
when try to go into recovery mode
android symbol comes and give a message 32% erasing and turn off
if i again force fully try to turn on stuck at samsung s7 edge logo with blue lines on top"recovery mode" in small letters.
Click to expand...
Click to collapse
What version is show up when you enter into Download mode 7.0 or 8.0 ?
it shows 7
but now phone dont turn ON to download/Recovery mode
Jaise joy said:
but now phone dont turn ON to download/Recovery mode
Click to expand...
Click to collapse
Make sure you charge your phone for about 2 hours and try to enter into Download mode again : ).
After that re-flash latest stock firmware for your region and use latest Odin version . Good luck
https://odindownload.com/download/
I want to my current rom G9650ZHU3ARK1 flash into G9650ZCU3ARK1 , lots of tutorials in the internet said that I don't have to turn off the OEM lock. I think that is because I didn't turn off it. I use odin 1.13.1 and ADB is installed, and after odin started progress, it shows me failed .
Then I have to reboot my phone, but there's a warning "An error has occurred while updating the device software. Use the Emergency recover function in the Smart Switch PC software."
I tried Smart Switch but no device shows in the emergency software recovery option .
And now my phone can't even shutdown, or can't enter downloading mode anymore. or recovery mode ( volume up + bixby + power ) , the only thing that it can do is reboot into error interface.
I don't know how to recover my phone, anyone can help me? please.
hey, same issue here, do u fix it?
if yes, can u tell me how can i enter download mode? i`m stuck in "an error..." screen, cant enter download mode :C