[TOOL]Splash screen note8 exynos - Samsung Galaxy Note 8 ROMs, Kernels, Recoveries, &

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tool splash screen note8
hello, I will share you my tool for note8 a late change your splash screen
•have a pc with windows
•have downloaded and unzipped the zip tool
•have software to retouch photos
•have the bootloader file from your rom
•have 2 minutes of your Temp
•have Odin and the data cable from your original note8
** Warning ** It is forbidden to reproduce this tutorial on another forum without asking permission.
If you use this tutorial to produce a content on your rom think about granting credit to my humble effort (thanks)
This operation involves risks: This forum "Galaxy-Note-Team & XDA" and / or myself can not be held responsible for any problems encountered during installation or possible handling problems. WELL READ THE TUTO BEFORE ANY MANIPULATIONS (SAME SEVERAL TIMES)
☆FRENCHE verssion https://mega.nz/#!G0pBxRzK!CyuiuO1OaonL1pIpa3qI3qQa-5c5XifqMdUCUWJCIWw
☆ENGLISH verssion
https://mega.nz/#!apZgWIIR!oXxrKy3824lkdRCwVbz40fKTJHDNv6LQ2Z1aIBfNCLQ
■ download the zip
■ unpack the tools (or want)
■ Double click on .exe
■ the instructions (the tool is very intuitive)
• do not worry the tool is intuitive exstrement Directive contains all you need
• BL.tar place the file of your current ROM in the in the tool file
• tool run in administrator mode
• enter the option 1, select your BL file and confirm by clicking on it (it'll decompiler your BL.tar)
• cut paste the up_param.bin parts1 file folder to the root of the tool
• click on 4 and confirm with there's gonna decompiler up_param.bin in the share folder
• retrieve the image that this change the nome logo.jpg at your convenience (keeping exactemant the same size as the original), otherwise soft brick (if it happens you reflash your original BL with Odin), and then replace the original folder units by your
• made then option 5 nomez up_param your file (the bin will be added by recompiling the tool) click enter then confirm it
• is recompile BL tar, choose option 2 (enter the name of your choice (tar will be added by the tool) click enter and confirm it
• select option 3 to add to your .md5 tar (advisor to the flash with odin), select your tar file, click enter and confirm it (if you want to return to the menu click n)
• voila you have finished your loan file to flash it in the md5 file that it found in packaged
● to flash the md5 file place it in the Rodin BL box
● if you have a problem with rebooting, flash the original BL your Roma, everything will be in order.
■ I want a user to add note8 ROOTE direct option via the mobile
Credits:
@topjohnwu For Magisk v14.2
@Chainfire For SuperSU
@MitoTakatori] For the tutorial, that inspired me
@XDA order for us to share and learn
@GalaxyNoteTeam=Team Dev Fast&Famous To be a excellent team of sharing and caring
@baloo30310 for me the images I need
@thijac99 to me fast mirrors Rom
@IZI.Xav to create our forum and GalaxyNoteTeam team Fast & Famous
Contributors​LE FENECK >>> http://www.galaxynoteteam.com/, - FrenchFamousTeam® - GNT
If my work pleased you hit the button thank you.

adon English verssion
https://mega.nz/#!WoQCBJYC!MENTe-1-fcpjZtPcdnt7kJS52-cqHtyrmeH7FDGx81Q
thanks to BALOO for the translation

Followed instructions as best I could, all I got was "md5 error. Binary was invalid"

haynesteve said:
Followed instructions as best I could, all I got was "md5 error. Binary was invalid"
Click to expand...
Click to collapse
Hello
bizarre, tar is good?
*try to flash it
I turn on my pc to check, but during my tests everything was functional.(windows 7 64 bits)
which version?

haynesteve said:
Followed instructions as best I could, all I got was "md5 error. Binary was invalid"
Click to expand...
Click to collapse
https://mega.nz/#!TsBUWLIa!vnaIvP6l_3qBqSKYfeX3vJz5VueCqYBYiVuc2F4_6jQ
I found, download this file and add it to the bin folder of the tool, restart the tool test and tell me. I've forgotten to put it, sorry.

maj of position 1.
new tools, with binary corrected

This mod sound good. But I'm a bit afraid to use it.
I'm afraid of brick my Device.
Can i easy extract my sboot file out of my device?
Is there such a dd/ command?
Gesendet von meinem SM-N950F mit Tapatalk

Logel said:
This mod sound good. But I'm a bit afraid to use it.
I'm afraid of brick my Device.
Can i easy extract my sboot file out of my device?
Is there such a dd/ command?
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
Hello
the change always involves a risk.
but just reflash the bl part of your rom.
why exstraire sboot?
on which mobile do you want to make the modification?

pendor24 said:
Hello
the change always involves a risk.
but just reflash the bl part of your rom.
why exstraire sboot?
on which mobile do you want to make the modification?
Click to expand...
Click to collapse
I thought sboot is the bootloader into a stock Rom
I have they galaxy note 8 SM-N950F/DS
CSC = DBT with nemesis custom Rom
Gesendet von meinem SM-N950F mit Tapatalk

Logel said:
I thought sboot is the bootloader into a stock Rom
I have they galaxy note 8 SM-N950F/DS
CSC = DBT with nemesis custom Rom
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
no
your ROM stock this composes into 4 files bl, ap, cp, csc.
which themselves even composes several files.
in case of problems you must reflate the BL file.
view that the modification relates to the first image that displays your note8 at the start, if it can not display it it will be in bootloop (soft brick)
go into donload mode, it does not play the splash in this mode (so no worries) and reflash the bl with odin.

@pendor24
You mentioned in S8+ forum that this tool is safe for S8+ Exynos as well, right?
I'm trying to change back the splash logo to stock again!
It was changed by "King Rom"!
Thank you.

samteeee said:
@pendor24
You mentioned in S8+ forum that this tool is safe for S8+ Exynos as well, right?
I'm trying to change back the splash logo to stock again!
It was changed by "King Rom"!
Thank you.
Click to expand...
Click to collapse
Hello
the tool of this post is for the note8
the one for the s8 + exynos is found in the common section s8 / s8 +

@pendor24
At first, thanks for sharing this guide with us. After first confusing i handled it and changed the splash screen logo. [emoji106] so i can confirm, it works.
On beginning it was a bit difficult to understand your steps.
Now my question:
Do you know if this guide will also work with coming Oreo bootloader?
Gesendet von meinem SM-N950F mit Tapatalk

Logel said:
@pendor24
At first, thanks for sharing this guide with us. After first confusing i handled it and changed the splash screen logo. [emoji106] so i can confirm, it works.
On beginning it was a bit difficult to understand your steps.
Now my question:
Do you know if this guide will also work with coming Oreo bootloader? View attachment 4436302
Gesendet von meinem SM-N950F mit Tapatalk
Click to expand...
Click to collapse
Hello
AD
new version in test yard
Added lz4 compression and decompression for oreo support.
release of the tool very soon.
thank you

pendor24 said:
Hello
AD
new version in test yard
Added lz4 compression and decompression for oreo support.
release of the tool very soon.
thank you
Click to expand...
Click to collapse
That's great news. [emoji106]
Take your time. Waiting patiently!
Gesendet von meinem SM-N950F mit Tapatalk

Never mind.
I found another way.

Max_Terrible said:
Never mind.
I found another way.
Click to expand...
Click to collapse
Have you seen this thread?
https://forum.xda-developers.com/galaxy-note-8/themes/mod-06-03-2018-custom-splash-screen-t3759567
It's really easy now to change the splash screen
Don't be afraid to hit the "Thanks" button if someone helped you. It doesn't hurt.

Logel said:
Have you seen this thread?
https://forum.xda-developers.com/galaxy-note-8/themes/mod-06-03-2018-custom-splash-screen-t3759567
It's really easy now to change the splash screen
Don't be afraid to hit the "Thanks" button if someone helped you. It doesn't hurt.
Click to expand...
Click to collapse
Yep, that is exactly the other way that I found. Thanks, though.

Hello
My new version included the flash by zip but still modifying param.bin
Because there are plenty of images that can be perssonalized work on my s9+ and note9 as well as all the verssions of mobile that Itested

Hey can u upload the updated Editor ? I habe updated my Phone to 8.0 and i cant use this tool anymore while the Bootloader Files are .LZ4 is. I will change my chargingscreen an more

Related

[TOOL] [DISCONTINUED] Nexus 5 Multi-tool 3, UNLOCK, CWM/TWRP, ROOT, RESTORE, DRIVERS

Nexus 5 Multi-Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me and kwongger are putting together a new tool, its one of the first that supports windows/linux/mac AND ANDROID! thats right, the tool can be used on your device!
FEATURES
Unlock bootloader
Install CWM
Install TWRP
Add root permissions
Add build.prop tweaks
Backup device
Flash a custom recovery
Flash a custom kernel
Revert device to stock out-of-box state
Pull device information
Install drivers
Find custom kernels, recoveries and roms
Click to expand...
Click to collapse
Due to my cousin having this device(not me) i would appreciate someone to help me with testing new features?
DOWNLOAD LINK
INSTRUCTIONS ARE SIMPLE
All activities take place with the device on and you will endup back with the device on.
Download
Extract
Run Tool.exe as administrator
Install device drivers(included)​
Click to expand...
Click to collapse
FAQ
Q. After trying to revert to stock state(out of the box) my device is stuck in a bootloop?
A. Boot into recovery, wipe data/factory reset. Your prayers have beey answered
Q. After the tool flashes recovery, it doesnt seem to stick. why?
A. This is not an error with the tool or recovery, its just.. a nexus thing...
Flash it a few more times and eventually it will stick!
Q. Why is the file only 1.5 MB?
A. All files are stored on server and pulled only when needed with a utility
Q. Will the tool download all the files everytime i wanna perform an option?
A. No. it downloads the file once and detects that its already there the second time.
Q. Is this tool worth my time?
A. Who would think a 10 minute toolkit could hit the portal?
Q. Are the drivers included?
A. Yes but no. the application downloads the drivers only if you want to install them via my tool
Q. Who's yo daddy?
A. Idk, son.
Click to expand...
Click to collapse
CHANGELOG
3.0
Added CWM
Updated TWRP
Added "Where to find custom..." in flash options
2.4
Fixed menu error
Changed file type to executable
Added logo
Added root options menu
Changed root method
All processes are now verbal
No wait-for-device command
2.0
All files stored on server
Cut the tool size down to 1.5 MB
Added restore to stock state
Added install drivers+guide
Added get device info
Fixed minor error
1.0
Initial release
Click to expand...
Click to collapse
Credits
Chainfire
PlayfulGod
Cwm
Twrp​
Click to expand...
Click to collapse
NOTE: what you do with this tool is your responsibility, use it at you own risk.​
Hello,
Good work!
Published on HTCMania :good:
http://www.htcmania.com/showthread.php?t=711894
David_Vaz said:
Hello,
Good work!
Published on HTCMania :good:
http://www.htcmania.com/showthread.php?t=711894
Click to expand...
Click to collapse
Thanks
You show it as note 3 multi tool, need to change that
jd1639 said:
You show it as note 3 multi tool, need to change that
Click to expand...
Click to collapse
whopps will fix that now
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ian
irhut said:
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ian
Click to expand...
Click to collapse
You will have to Restore your phone.
My kit will have recovery functions monday.
http://forum.xda-developers.com/showthread.php?t=2508817
irhut said:
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ild.pro
Ian
Click to expand...
Click to collapse
what function did you use?
Kwongger said:
You will have to Restore your phone.
My kit will have recovery functions monday.
http://forum.xda-developers.com/showthread.php?t=2508817
Click to expand...
Click to collapse
Also no he doesnt, the only thing that could cause this is the build.prop tweaks, whitch can be reverted by pushing the backup back to /system/ Aldo mine will Also include restore options soon
What tweaks are in this?
Sent from my Nexus 4 using Tapatalk
crackmulah said:
What tweaks are in this?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Battery saving deepsleep quickbook scrolling enhancement better touch responde better jpeg quality better picture quality better internet and connection speed, googles sms Server and overall smootheness
Does this tool install the official TWRP release for the N5?
ricky310711 said:
Battery saving deepsleep quickbook scrolling enhancement better touch responde better jpeg quality better picture quality better internet and connection speed, googles sms Server and overall smootheness
Click to expand...
Click to collapse
That's quite something to say, better all these things for a new device and software.
Sent from my Nexus 4 using xda app-developers app
Synyster06Gates said:
Does this tool install the official TWRP release for the N5?
Click to expand...
Click to collapse
Yes!
also people reading the article on the portal, the tool does not use fast flash commands, it uses the dd method for those flashes, when i add kernel flashing and backing up your device as .img files then i will be adding fastboot flash commands, so yes, the flashes occur when your device is booted!
Can I ask what version of TWRP is installed, is it the latest?
ItzMar said:
Can I ask what version of TWRP is installed, is it the latest?
Click to expand...
Click to collapse
there is only one version of TWRP compiled for the N5 and yes its the latest! update coming soon!
Ok thanks man. Can I also ask where to find the device drivers?
ItzMar said:
Ok thanks man. Can I also ask where to find the device drivers?
Click to expand...
Click to collapse
i am almost finished updating the tool i will include it in the next update!! but you could more then likely find them in the general section!
ok cheers, no problem. Will wait for the new version to be up, no rush. Thanks for your commitment to provide a tool for us noobs/lazy people!
Would you recommend running your tool before first boot?
Just a few questions: when there is <waiting for device> for 5 minutes, that seems like my drivers are wrong? It was possible to unlock, but not to install a recovery, so i am trying to update my drivers...
And can i run the tool and select unlock, install recovery and root even when my device is already unlocked?

[Toolkit][GUI]OnePlus One Toolkit by manudroid19

Introduction
This is a Graphic User Interface Toolkit for the OnePlus One.
It will allow you to perform all the basic root actions for the OnePlus One easily.
Features:
.-Unlock your device's bootloader
.-Lock your device's bootloader
.-Root your OnePlus One without installing a custom recovery
.-Flash CM11S and ColorOS
.-Install ADB drivers
.-Install and boot custom recoveries
.-Install custom kernels
.-Self-install
.-Self-update
.-Log so you can learn from used commands
.-EFS backup & restore
Future updates:​.-Add ROM flashing feature
.-Implemet native Java downloader instead of wget
.-Add Install apk option
.-And more features... Use the "Feature Requests" section.
All of this, from a graphic interface and with a few clics.
Notes:
.-Since I'm not English, I can make mistakes, so PLEASE correct me, even in the thread or in the toolkit.
.-I don't have the phone (my order is placed), so I cannot test everything... Please report any bugs... This is my first application..
.-Since its a self-extractable file, it can take like 5 sec to start the first time.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
Installer v2.0: https://www.mediafire.com/?ljkoi4jfz7jj2pi
Acknowledgements:
@extream87 for EFS backup & restore script
StackOverFlow users, without other people's answer, I wouldn't be able to make this @Chainfire, for creating SuperSU @Mnt-XDA, for creating the bootoloader unlocker @graffixnyc, for packing ColorOS
And other peolple I forgot, for helping me making this, specially to r0i from DarkSideTeam Forums...
FAQs:
In which order must I press the buttons? I just want to root my phone...
First of anything,you must unlock your device.
If you are on 25r, you can use method 2 and avoid wiping your data.
If you have 30O or 33R, you must use method 1, and yes, it will wipe your data.
After data, you can just root, install your custom recovery or kernel or do whatever you want..
Developers info:
How was the toolkit made??
It's an application completely coded in Java, wich comes with a "tools" folder and it's runned by a hidden BAT to prevent JRE issues. The "tools" folder contains a basic ADB kit, some bat scripts that the application executes for locking and unlocking the bootloader, and a download kit based on wget for Windows.
Everything is contained in a self-executable rar file so there's only one file for users. It extracts himself on c:windowstempOPO Toolkit folder.
How does the toolkit work??
The application obtains his own path in your computer and from there, it runs the proper bat files to download the neccesary files and perform the desired actions.
Is posible to port it to other OS?
Yes. The Jar file doesn't need a port, and you just need to port the bat files into bash scripts(linux)
Edit: I've just seen @scumpicule 's toolkit. If he wants, we can colaborate using his scripts for a bigger and better GUI toolkit!! Send me a PM!!
My antivirus sais it's malware...
There's no malware on this toolkit.
Only false positives detected by a chinese antivirus, possibly because it's a self-extractable RAR file wich extracts himself on "C:WindowsTempOPO_Toolkit". The RAR file runs then the vbs file, which runs the bat file and which runs the JAR file. Maybe that's suspiciuous for the antivirus.
Why the bat runs the jar? Because some Java versions have problems while directly executing a jar.
Why the vbs runs the bat? Becayse if not, a black cmd window appears with the GUI.
The other exe files standard adb, standard fastboot, a wget for windows which I found here and a 7za module from the official webpage.
The bats are simple scripts and you can easy inspect them.
What lasts? The jar.
Whith first stable version, I will release the source code of the GUI application.
BUT if someone recognized in xda or in OP forums is suspicious and wants to look at it now, I will provide it to him.
Is this 100% clean o you want more warraties? Just ask me on the thread.
XDA:DevDB Information
OnePlus One Toolkit by manudroid19, Tool/Utility for the ONEPLUS ONE
Contributors
manudroid19
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2014-10-09
Created 2014-07-06
Last Updated 2014-10-09
Changelog:
v1.0
.-Initial release
v1.1
-Added "Flash CM11S/ColorOS" option
-Added option to install ADB drivers
-Added option to enter fastboot/recovery mode
-Changed Toolkit's main directory from C:\Windows\Temp to C:\Windows\Temp\OPO Toolkit\
v1.2
-Added option to flash a custom recovery
-Added option to boot a custom recovery
-Fixed a bug wile booting TWRP in Root feature
-Redesigned interface & code cleared
v1.3
-Attemped to fix a bug on Rooting method 2(old method. deprecated until I get the phone)
-Added new easier root method.
Note:Boot recovery & flash recovery options are possibly buggy, please tell me..
v1.3.1
-finally fixed root and recovery boot
v1.4
-added option to flash custom kernels
-added new unlocking bootloader method
v1.4.1
-fixed startup and added Java bad installation warning
v1.5
-Added update engine
-Added installation engine
-Added a drivers installation wizard
-Updated CM11S link.
-Fixed rooting
-Fixed booting recoveries
-Fixed bugs
v1.6
-Quick fix for CM11S flashing bug
-Added option to flash 64 GB partition layout instead of 16 GB one while flashing CM11S
v1.7
-Fixed bug while unlocking -method 2-
-Added log option
-Tried to sign installer so there's no more virus alerts
-Changed CM11S flashing method so there's no more mistakes with partitions
v1.8
-Added EFS Backup & Restore option
-Added option to select file in CM11S & Color OS flashing
-Added support to other languages... Spanish translation started
-Added default kernel & recovery
-Added option to flash 30O OTA
v1.9
-Fully support to other languages, every field can be translated
-Fixed unlock 2nd method bug
-Updated recoveries links (thanks to @katinatez)
-Cleared and improved interface
v2.0
-Added ADB & Fastboot devices list on main menu
-Now toolkit check devices connection before doing anything
-Now toolkit checks if bootloader is unlocked (if needed)
-Added Italian translation
-Added French translation
-Added German translation
-Fixed bug while opening "Final Configuration"
-Updated recovery and kernel links
-Fixed EFS Backup!
Reserved
Looks nice.
I downloaded the .exe, but when I run it, noting happens. I don't get a GUI at all.
Yep, forgot that I didn't have Java installed.
Thanks for this! Will definitely be using it whenever I need to root and whatnot again.
Nice job, thanks a lot for your sharing.
donalgodon said:
Looks nice.
I downloaded the .exe, but when I run it, noting happens. I don't get a GUI at all.
Click to expand...
Click to collapse
Make sure you have JAVA properly installed. You can check it in the official page.
Enviado desde mi GT-S6500D usando Tapatalk 2
@manudroid19... do you need help getting the bat scripts converted to bash for use in linux? If yes, I can help you if you want.
dansou901 said:
@manudroid19... do you need help getting the bat scripts converted to bash for use in linux? If yes, I can help you if you want.
Click to expand...
Click to collapse
I'm able to do it, but I haven't got much time, so if you could help me porting to linnux while I continue the main developing of the application would be nice... Do you understand Java???
manudroid19 said:
I'm able to do it, but I haven't got much time, so if you could help me porting to linnux while I continue the main developing of the application would be nice... Do you understand Java???
Click to expand...
Click to collapse
Not really. I can write bash scripts however. Didn't take a look at your code yet, but will sometime today.
---------- Post added at 03:46 PM ---------- Previous post was at 03:41 PM ----------
Just took a quick gaze at your files... Only thing that's needed to be added are the linux binaries for adb and fastboot as well as adding those to path. Just a few commands, shouldn't be hard.But I don't know how exactly to pack the whole thing in one executable file in linux, could do a script for the whole thing however...
Today I worked a bit in the Toolkit. Flashing of CM11S and color os is on its way. Bigger problem is when downloading color os(i need help, I cant find a direct link)..
A button to enter in fastboot and recovery mode is being added on main menu, and some bugs are beeing fixed. Maybe tomorrow v1.1 is out!!
Androidfilehost doesnt let me download color os from direct link. If anyone can find it or mirror it on dev host.com, it will be appreciated..
Just asked for permission to mirror... If yes, I'll provide you a link for it on devhost.
dansou901 said:
Just asked for permission to mirror... If yes, I'll provide you a link for it on devhost.
Click to expand...
Click to collapse
You may provide the reason
Enviado desde mi GT-S6500D usando Tapatalk 2
manudroid19 said:
You may provide the reason
Enviado desde mi GT-S6500D usando Tapatalk 2
Click to expand...
Click to collapse
dont work on windows 7 ?i cant activate this applikation....
rebeccadri said:
dont work on windows 7 ?i cant activate this applikation....
Click to expand...
Click to collapse
If the application doesn't show up, is ALWAYS because Java isn't properly installed...
Enviado desde mi iPod touch utilizando Tapatalk
I need the usb driver?'ve tried to root.press to download TWRP and it works. press to boot IMG .. waiting for device, but nothing happend.what should I do?
why i must unloock bootloader befor root.normally i dont need to unlock bootloader for root.
oneplus one der ersten stunde
rebeccadri said:
I need the usb driver?'ve tried to root.press to download TWRP and it works. press to boot IMG .. waiting for device, but nothing happend.what should I do?
why i must unloock bootloader befor root.normally i dont need to unlock bootloader for root.
oneplus one der ersten stunde
Click to expand...
Click to collapse
Without unlocked boot loader, you can't boot a custom recovery...
Make sure that you are in fast boot mode.
Next version will include a option to install drivers
Enviado desde mi iPod touch utilizando Tapatalk
manudroid19 said:
Without unlocked boot loader, you can't boot a custom recovery...
Make sure that you are in fast boot mode.
Next version will include a option to install drivers
Enviado desde mi iPod touch utilizando Tapatalk
Click to expand...
Click to collapse
oh than i waiting for the next version,because my pc can´t intsall the driver...
v1.1 is out!! Enjoy!!
see the changelog on second post!!

[APP] [UNOFFICIAL] DualBootPatcher with fixed TZ version issue for OnePlus 3T

DualBootPatcher
with fixed TrustZone issue for the OnePlus 3T​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dual Boot Patcher is an app created by chenxiaolong, which allows you to have multiple ROMs on a single device. This thread was originally to present a port of this app while the OnePlus 3T wasn't officially supported. However it is also official supported now but there is an issue with the official app more precisely with the TZ version while installing patched ROMs. Then you get an error like
Code:
oppo.verify_trustzone() failed to read current TZ version
This is because some ROMs use a special partition called TrustZone (TZ) to identify your device. But this partition is not accessible by ROM zip files patched with the official app. I fixed it by making the TrustZone partition accessible during flashing. I also gained much experience with the Dual Boot Patcher app so feel free to ask questions but please note that if flashing fails, first look up the error at /sdcard/MultiBoot.log and google it before reporting it... Please leave a 'Thanks' if this was helpful!
Important:
I am not responsible for any damage on your device!!! Use this app on your own risk!!!
Make a full Backup of your phone with TWRP or CWM before doing anything!!!
Click to expand...
Click to collapse
If you want to know more about how to use this app, read the official Thread:
https://forum.xda-developers.com/showthread.php?t=2447534
Working:
- patch ROM zip files
- patch GAPPS zip files
- patch SuperSu zip files
- Boot UI​
Issues:
- Sometimes after flashing something, all pins, patterns or passwords are wrong in one of the ROMs. Then simply delete the file /data/system/locksettings.db (your saved fingerprints won't be lost) with TWRP.
- If flashing of a patched zip fails for any reason, you have to choose another install location ("Partition Configuration" in the app) when patching the same zip file again!​
Important instructions for the OnePlus 3T:
- To save a patched zip file, select "OnePlus 3T" instead of "Internal storage" on the sliding menu, otherwise you won't be able to save it.​
- You should patch zip files only for data-slot because the other partitions are usually too small!​
Screenshots:
​
Licenses:
https://github.com/chenxiaolong/DualBootPatcher/tree/master/licenses​
Download:
Version 170306
DualBootUtilities.zip​Changelog:
170305:
- added the OnePlus 3T to the supported Devices
170306:
- fixed TrustZone issue (the one with removing a string from updater-script)​
davan7 said:
any issues with it?
Click to expand...
Click to collapse
As far as I know, there are no special issues when using it on the OnePlus 3T apart from the mentioned ones.
How do i boot in to secondary? No need for DualBootUtilities?
Laapander said:
How do i boot in to secondary? No need for DualBootUtilities?
Click to expand...
Click to collapse
Just select ROMs on the sliding menu of the app and then click on secondary. You don't need DualBootUtilities but you can use it to select in to which ROM you want to boot via recovery.
I have a problem, when I patch the rom file I see only OnePlus 3 and not OnePlus 3T device in the selection, I tried to flash from TWRP but also if I delete the string that is mentioned in the instruction, I received an error. The message say that file is patched for OnePlus 3 and not for OnePlus 3T.
When I used it on Nexus 6P all worked very smooth.
Now solved first problem, I wrongly edited file script but now the zip give me the follow message.
Is there any way to install Aroma zip?
MyStyle0714 said:
Is there any way to install Aroma zip?
Click to expand...
Click to collapse
You can patch and install an Aroma zip as well!
VampireHeart said:
I have a problem, when I patch the rom file I see only OnePlus 3 and not OnePlus 3T device in the selection, I tried to flash from TWRP but also if I delete the string that is mentioned in the instruction, I received an error. The message say that file is patched for OnePlus 3 and not for OnePlus 3T.
When I used it on Nexus 6P all worked very smooth.
Now solved first problem, I wrongly edited file script but now the zip give me the follow message.
Click to expand...
Click to collapse
This is because flashing the first zip failed. You have to patch your zip file again but choose another install location. If you download the updated app, you also don't have to delete the string from updater-script anymore.
Glove007 said:
This is because flashing the first zip failed. You have to patch your zip file again but choose another install location. If you download the updated app, you also don't have to delete the string from updater-script anymore.
Click to expand...
Click to collapse
Thanks but I just have the last version of the application and of I don't remove the string I have the error of verification, I can try to repatch the file.
Glove007 said:
You can patch and install an Aroma zip as well!
Click to expand...
Click to collapse
But after I tried to install it, it showed error.
MyStyle0714 said:
But after I tried to install it, it showed error.
Click to expand...
Click to collapse
Which error? (look also at /sdcard/MultiBoot.log)
Glove007 said:
Which error? (look also at /sdcard/MultiBoot.log)
Click to expand...
Click to collapse
http://imgur.com/PRvCAOJ
MyStyle0714 said:
http://imgur.com/PRvCAOJ
Click to expand...
Click to collapse
The error is displayed clear on the screen: "Zip files using AROMA installer can only be flashed from recovery", so flash it from recovery...
I always seem to get this error, no idea what I'm doing wrong.. any ideas?
Here the logs
Pharrax said:
I always seem to get this error, no idea what I'm doing wrong.. any ideas?
Click to expand...
Click to collapse
The system partition of the OnePlus 3T is probably too small for two ROMs, so try for example a data-slot!
Pharrax said:
Here the logs
Click to expand...
Click to collapse
Yes, is's because the system partition is too small. (Ich kann auch auf Deutsch schreiben...)
Glove007 said:
The system partition of the OnePlus 3T is probably too small for two ROMs, so try for example a data-slot!
Click to expand...
Click to collapse
Glove007 said:
Yes, is's because the system partition is too small. (Ich kann auch auf Deutsch schreiben...)
Click to expand...
Click to collapse
Thank you that fixed the issue :good:
(Bleiben wir bei Englisch damit andere die das Problem haben es auch verstehen )
I try to flash Aurora Rom V8 in TWRP. I am getting symlink error in aroma. Any ideas? Tried secondary and multi slot. Decrypted phone.
Edit. Something to do with V8 is 7.1.1?
Edit2. Can't take screenshot in Aroma
Laapander said:
I try to flash Aurora Rom V8 in TWRP. I am getting symlink error in aroma. Any ideas? Tried secondary and multi slot. Decrypted phone.
Edit. Something to do with V8 is 7.1.1?
Click to expand...
Click to collapse
Try data-slot and post /sdcard/MultiBoot.log!

[TOOL] G950xx compatible utility and G955xx splash screen customization.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, I present you a tool that I always create based on TarMd5Packager by AS
This tool will automate the backup, the decompilation, recompilation and transfer to your S8plus of up_param (it will remain that a line control was carried out on the terminal emulator directly on your mobile, for injecting into the system your splash screen change
this technique only works on soc exynos​
● be ROOTE
● have enabled debugging
● original data cable
● the terminal emulator (installed on your mobile)
● a PC under Windows
■ download the zip
■ unpack the tools (or want)
■ Double click on .exe
■ the instructions (the tool is very intuitive)
EXPLANATION OF CONTROLS
☆ 1 allows for a BACKUP of the original file (required to continue) it will be stored in the folder
UP_PARAM_Backup
☆ 2 transfer the new tar on your S8 +
☆ 3 up_param.bin decompile the file to access the images (they will find it in file shares, you do more than to change what you want scrupulously respecting the dimensions)
* Before using option 2 you must copy the file up_param.bin packaged folder to the root of the tool (it has say in there or what is the .exe that launches the tool)
☆ 4 recompile in tar after your changes
☆ 5 closes the tool
After downloading the file to your phone,
open 1 the terminal emulator
2 type
su
Click to expand...
Click to collapse
3 type
mount
Click to expand...
Click to collapse
4 type
dd if=sdcard/temp2/up_param.bin of=dev/block/sda5 bs=4096
Click to expand...
Click to collapse
5 type
Restart your mobile and enjoy
Click to expand...
Click to collapse
○verse emulsion 1 together (stable)
Credits:
@topjohnwu For Magisk v13.0 (96f8efc)
@Chainfire For SuperSU
@MitoTakatori For the tutorial I inspired
@XDA For To allow us to exchange and learn
@GalaxyNoteTeam=Team Dev Fast&FamousTo be a great team of sharing and mutual aid
@baloo30310To make me the pictures I need
@thijac99To make me fast mirrors rom
@IZI.XavFor creating our GalaxyNoteTeam forum and the Fast & Famous team
Contributors​LE FENECK >>> http://www.galaxynoteteam.com/, - FrenchFamousTeam® - GNT
If my work pleased you hit the button thank you.
whole team you thanks and waiting for your return.
◇ CHANGE LOG◇
• Stable v1 betat
■ has vennir v1
• French verssion
• graphic change
• cleaning folders from PCs and mobile tool (yet it must be done by hand)
□ to do
• Automate 100% until restart Mobile after installing the modified file
@OP
Thank you.
samteeee said:
@OP
Thank you.
Click to expand...
Click to collapse
Of nothing, with pleasure
The CMD window closes instantly after I select "4". How do I fix this?
Aphex13 said:
The CMD window closes instantly after I select "4". How do I fix this?
Click to expand...
Click to collapse
Hello, I upload a new file, you will have it in early afternoon.
Aphex13 said:
The CMD window closes instantly after I select "4". How do I fix this?
Click to expand...
Click to collapse
https://mega.nz/#!OsBTyDpI!POIZ9bjt2LqKykAvUpnrKiuxF8quTyKoIyfDdZQ45gU
Download this verssion and tell me if it works
thank you
pendor24 said:
https://mega.nz/#!OsBTyDpI!POIZ9bjt2LqKykAvUpnrKiuxF8quTyKoIyfDdZQ45gU
Download this verssion and tell me if it works
thank you
Click to expand...
Click to collapse
Works perfectly now. Thank you!
Aphex13 said:
Works perfectly now. Thank you!
Click to expand...
Click to collapse
thank you for the feedback
can anyone give me stock bootsplash s8+ or param.bin s8+ please..
Hello
param. Bin found in the file
BL of a stock rom.
Hi there! First of all thx for this tool, it works great and made the thing much easier
I have a question, how can i make an image to fit the whole screen?? I tried modifiying resolution, cms, inches...but i don´t find the key. I would appreciate any help .
Thanks!
funkatiko said:
Hi there! First of all thx for this tool, it works great and made the thing much easier
I have a question, how can i make an image to fit the whole screen?? I tried modifiying resolution, cms, inches...but i don´t find the key. I would appreciate any help .
Thanks!
Click to expand...
Click to collapse
Hello
me i'm getting to center the picture but no more.
try to put text at the top and bottom of the image, (I pence that all proportions are from the text.
So, just checking... apologies for the n00b question, but you have to be rooted for this?
Also,
Who provides the animations, you or us?
Thanks!
Hdhntr23 said:
So, just checking... apologies for the n00b question, but you have to be rooted for this?
Also,
Who provides the animations, you or us?
Thanks!
Click to expand...
Click to collapse
Hello
yes it must be root
it is up to you to modify the images.
we can use it without root by decompiling the bootloader and putting the param.bin at the root of the tool then decompiler with the tool, made your modifications and recompile. take the new param. bin recompile the bootloader and flasher with odin
(but I'm not sure that knox is not triggered)
This does not work for snapdragon version.
allaidback said:
This does not work for snapdragon version.
Click to expand...
Click to collapse
Hello
Is this a question?
or an affirmation?
can you provide me with a screen of the path
dev / block / platform /? ? ? ? ? . ufs
and up_param files. bin and param. bin (or the bl of your s8) so that I can make a snapdragon verssion
thank you
wow! i was just looking into this.. does this also allow editing on the param partition or only the images??
elliwigy said:
wow! i was just looking into this.. does this also allow editing on the param partition or only the images??
Click to expand...
Click to collapse
Hello .
no it just shows images.
what you want to edit in param. bin?
pendor24 said:
Hello .
no it just shows images.
what you want to edit in param. bin?
Click to expand...
Click to collapse
well on our device the param partition is ablock img and containsmore than juat images.. i might b looking at something else though, i cant seem to find a param.bin lol
our layout structure is dif. i think on snapdragon variants.. i however think the key to unlocking our bl is in the param psrtition
our /param block device is sda7 at /dev/block/sda7. looking in platform folder it symlinks back to /dev/block/sda7

[TEST][TWRP]Unofficial DOOGEE MIX TWRP ^

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
ABOUT TWRP:
Hallo!,Everyone
*ROOT USING WILL FULLY WORK USING MAGISK*
*Thx To mans0amador IN needrom see cerdits*
*THIS TWRP IS FOR TESTING SO PLEASE REPORT BUGS*
*After more editing in the STOCK ROM
*I found it forced to install recovery on any reboot and not accept any modding for system and the root WILL* WORK After i remove this options
*So I waitting for doogee to realase a stabel rom with no bugs and MOD it , Please wait for it :^) ​INFORMATION:
1- Based On Needrom TWRP by @Iceman For maizu m3x Version 3.0.3
2- PORTED BY ME @Mr13Dx , @seg2015 " THE SAME MAN "
3- I do
Code:
1- remplaced the kernel with rooted kernel
2- remplaced file_contexts and file_contexts.bin " (Thanks to [email protected] for this amazing tool.)
3- remplaced "recovery.img-board"
4- edited recovey.fstab " some mount's points.
5- adds som lines to default.prop to get good density and hwrotation is 180 (Thanks to DOOGEE MIX THERED IN TELEGRAM )
BUGS:
1 The resolution is 1080x1920 ( use twrp materailised them)
If you found twrp for 720x1280 tell me please;
2 not tested yet but can works
Changelogs:
* Stock Theme version
Code:
*/
20170913 Return to 3.0.3 Version ( many bugs fixed)
20170731 - Filename: recovery-20170731-2533.img
- Change resolution to 720x1280 , thanks to [user=5620724]@Echaeos[/user] for test
*/ 20170729 - Filename: recovery-20170729-1913.img
- initial release
DOWNLOAD:
* TWRP WITH ORIGINAL THEME
Link
]
CREDITS:
@me for the port
Kernel root cerdits
Credits: @eg843 (xda) for the idea
@Magisk
@needrom
@getdroidtips(.)com for unlock bootloader method
@Echaeos (xda) for providing 4/64 patched kernel
@doogeeMIXTHEREDINTELEGRAM to the hwrotation is 180
@jemmini the twrp base For Mt6757
@needrom
@temwin
@needrom
@Echaeos for test with me
@you,
Nice, will try it this evening. Did you manage to install supersu or magisk?
pheemc said:
Nice, will try it this evening. Did you manage to install supersu or magisk?
Click to expand...
Click to collapse
NOT Yeet
i wait someone tell me the twrp has 720x1280 ui in ramdisk
you cant test it by yourself
guys, thanks for your work. I've just tested the new twrp but I still have a reversed screen, blocked with request of decryption and any touch on the screen doesn't work. I have unlocked bootloader, I forgot a passage maybe? Thanks
Same here... Maybe in .twrs file wie habe to add tw_rotation=1?!
Also unable to install supersu vor magisk...
Echaeos said:
guys, thanks for your work. I've just tested the new twrp but I still have a reversed screen, blocked with request of decryption and any touch on the screen doesn't work. I have unlocked bootloader, I forgot a passage maybe? Thanks
Click to expand...
Click to collapse
dear @Echaeos
thenks for your test , please tell me the twrp you downloaded
and please if you now any fixes bugs for twrp and twrp has 720x1280 twres file tell me
Mr13Dx said:
dear @Echaeos
thenks for your test , please tell me the twrp you downloaded
and please if you now any fixes bugs for twrp and twrp has 720x1280 twres file tell me
Click to expand...
Click to collapse
"recovery-20170729-1913.img" this image, for me it's not a big deal the rotation of twrp but is unuseable, the touch screen doesn't work, the volume or power either, I can't do anything. Now, after flashing with fastboot command "fastboot flash recovery x.img" I noticed that the recovery stay there for awhile, then return to stock recovery
Echaeos said:
"recovery-20170729-1913.img" this image, for me it's not a big deal the rotation of twrp but is unuseable, the touch screen doesn't work, the volume or power either, I can't do anything. Now, after flashing with fastboot command "fastboot flash recovery x.img" I noticed that the recovery stay there for awhile, then return to stock recovery
Click to expand...
Click to collapse
I think it is an port bug
but you can test the themed ver and it is has 720x1280 and 1 st img has 1080x1920 screen so it is unuseable
and the stock recovery retenus is a filename recovery-from-boot.p he flash stock recovery
so after the twrp work you can root and delete it using an exploer
Mr13Dx said:
I think it is an port bug
but you can test the themed ver and it is has 720x1280 and 1 st img has 1080x1920 screen so it is unuseable
and the stock recovery retenus is a filename recovery-from-boot.p he flash stock recovery
so after the twrp work you can root and delete it using an exploer
Click to expand...
Click to collapse
nothing to do guys, even with the mod version the screen is even worst with only a first portion of screen (I think because It see it as Full HD) and like always no touch response. I remember you that I'm trying with fastboot and not with SP Tools, speak that, don't give up we can do it :good:
guys nothing new on the way?
Anyone tryed to install magisk 13.5 beta with the TWRP given to root the device?
Hello friends ,
For me the problel its the screen because réal its a HD screen not qhd,full HD .... And its Samsung amoled , its the problèmes sur because you can install twrp but screen many bug after install if you need help i am here and very motivied
Thanks for your reply
Regards
pikachu27 said:
Hello friends ,
For me the problel its the screen because réal its a HD screen not qhd,full HD .... And its Samsung amoled , its the problèmes sur because you can install twrp but screen many bug after install if you need help i am here and very motivied
Thanks for your reply
Regards
Click to expand...
Click to collapse
Thanks! For your testing
Please report buges and if you now any things for fixes, twrps 3.1.1 has 720x1280 , a devices to use it as base tell me
you will be a rock if you help me!!
what you see
a black secreen or what!
Thanks!
Good news
Mr13Dx said:
Thanks! For your testing
Please report buges and if you now any things for fixes, twrps 3.1.1 has 720x1280 , a devices to use it as base tell me
you will be a rock if you help me!!
what you see
a black secreen or what!
Thanks!
Click to expand...
Click to collapse
Root is available
You can use Magik for this
Tutorial on page 19 xda #root doogee mix#
Or on needrom download...
Regards
PS: 4gb and 6gb OK
Yes using rooted kernal
Echaeos said:
"recovery-20170729-1913.img" this image, for me it's not a big deal the rotation of twrp but is unuseable, the touch screen doesn't work, the volume or power either, I can't do anything. Now, after flashing with fastboot command "fastboot flash recovery x.img" I noticed that the recovery stay there for awhile, then return to stock recovery
Click to expand...
Click to collapse
hi
this is my first doogee and i ran into a little problem.
i tested that recovery.img. so i unlocked my bootloader and flashed that recovery with fastboot.
now if i power on the phone it says untrusted ( thats normal i know) but it dont boot up.
it goes into the recovery and because of no touch etc i cant to anything.
i even cant go into the bootloader where i can choose fastboot option. (vol+ and power dotn work anymore)
i have tried flashtools but there i get a brom cmd send da error.
anyone knows a soultion?
p.s: you said you noticed that the phone goes into stock recovery again after some time. how ?
edit:
nevermind. fixed it with flashtools
i edited some things in flashtool settings.
1.For download agent select DA_PL.BIN ( all in one cant work in this problem)
2.menu Options -> connection - > choose usb full speed with battery
Guys.
Already rooted and i will Cook my clean eragon Rom in the next days.
4gb version
Gesendet von meinem MIX mit Tapatalk
:good:
skeleton1911 said:
Guys.
Already rooted and i will Cook my clean eragon Rom in the next days.
4gb version
Gesendet von meinem MIX mit Tapatalk
Click to expand...
Click to collapse
Skeleton you're make it to run twrp? I always have problem, it boot but I can't basically do anything
------------------------------------------------
Tried the flashing with fastboot, the twrp doesn't boot at all. Another thing guys, i'm not a linux programmer but if I unzip the recovery image I see that the permissions for almost thing aren't 0777 (which means that the recovery take permission to WRITE , to read and EXECUTE) Tell me if I'm wrong.
Echaeos said:
Skeleton you're make it to run twrp? I always have problem, it boot but I can't basically do anything
Click to expand...
Click to collapse
I ran into a problem .
What happend:
I finished to build my rom. Used flashtools to flash it. All went good . But then at 80% my pc shuts down.
I thought W*F ,
Now the phone is dead. Even boot to bootloader dont work. I will try to fix it , hope I can manage that.
(P.s using flashtools again don't work . I get a hash mismatch error. I think the preloader or bootloader is damaged.. we will see.
To your question.
No custom recovery. The first version of my rom will be without root. Use magisk with patched boot.img to get root . But without r/w permissions, because of the stock recovery
Gesendet von meinem P9000 mit Tapatalk

Categories

Resources