Hi ,
I have an Honor 7 PLK-AL10 ( chinese version ).
I decided to flash a custom rom to remove all the chinese apps ans parameters..
So i find the huawei multitool and succeded to change the model from PLK-AL10 to PLK-L01. So next i tried to flash the custom rom "Yoda".
This worked fine but there is a pertty big problem .. ^^"
My sim card is only detected in "2G mode".
There is two emplacements for sim card in the phone, so i can choose the emplacement wich will use 3g/4g network, and the other will only have 2g network.
So the only way i find is to put the emplacement of the card sim in 2g mode so the card is recognize. But not in "3g/4g" mode
Any ideas ?
I tried to flash a stock rom but i'm not sure how to do that.
I put the update.app in the right dload folder, restart the phone with volume +/volume -/power buttons, i saw the installation began but it stuck at 5% during 1 hour ..
I will try with an other stock rom, any suggestions of a stock rom version to use ?
Sorry for my english, i hope you will understand me !
Thanks
Valnuro
You can report the problem to the Rom maintainer.
Yoda rom is for honor 7 PLK-L01 and not for PLK-AL10, even if you modify your model name to PLK-L01 the rom is not gonna work like it should be because component in the chinese version of the honor 7 are not the same than the ones in the eu version.
In the yoda rom specifications section :
Base ROM: MM 6.0 PLK-L01C432B370
Click to expand...
Click to collapse
Blendman974 said:
Yoda rom is for honor 7 PLK-L01 and not for PLK-AL10, even if you modify your model name to PLK-L01 the rom is not gonna work like it should be because component in the chinese version of the honor 7 are not the same than the ones in the eu version.
In the yoda rom specifications section :
Click to expand...
Click to collapse
So that explains why.
Related
Let's start discuss of the latest phone by Huawei - A199
Debut price at RMB 1999. Value for money?
Looking forward any expert for the custom roms (google friendly)
Bought
yenyang said:
Let's start discuss of the latest phone by Huawei - A199
Debut price at RMB 1999. Value for money?
Looking forward any expert for the custom roms (google friendly)
Click to expand...
Click to collapse
I bought it on 18 May 2013. still trying now~~
Unlocked Huawei A199
Hi
I bought it in China and cannot use the CDMA slot for Indonesia number.
Anyone know how to unlocked CDMA slot in this phone? How to root and change ROM for international use?
Thanks
hola soy marquez864
Hi I everything I have found on this phone is at anzhi page, there is everything from rom official until cooked rom that if all Chinese so that use the google chrome with your translator
arifzal said:
Hi
I bought it in China and cannot use the CDMA slot for Indonesia number.
Anyone know how to unlocked CDMA slot in this phone? How to root and change ROM for international use?
Thanks
Click to expand...
Click to collapse
i‘m afraid that there’ll be a few custom rom for A199,for the k3v2 cpu,it is special,which needs to confirm the boot.imgfile all the time,unless Huawei would unlock this structure.the models like A199,such as Huawei P6,U9508,Mate,etc all have this sort of question
on Anzhi page ,chinese developers only ported miui for them due to miui uses the same boot file.
you can browse the page.
good luck!
Huawei is introducing its latest product called P6.
huawei a199
This is the thread that I have found to have official rom and custom rom for this phone, with large capacity
rangerwill said:
i‘m afraid that there’ll be a few custom rom for A199,for the k3v2 cpu,it is special,which needs to confirm the boot.imgfile all the time,unless Huawei would unlock this structure.the models like A199,such as Huawei P6,U9508,Mate,etc all have this sort of question
on Anzhi page ,chinese developers only ported miui for them due to miui uses the same boot file.
you can browse the page.
good luck!
Click to expand...
Click to collapse
rangerwill said:
i‘m afraid that there’ll be a few custom rom for A199,for the k3v2 cpu,it is special,which needs to confirm the boot.imgfile all the time,unless Huawei would unlock this structure.the models like A199,such as Huawei P6,U9508,Mate,etc all have this sort of question
on Anzhi page ,chinese developers only ported miui for them due to miui uses the same boot file.
you can browse the page.
good luck!
Click to expand...
Click to collapse
is there any thread on anzhi to hack the cdma slot? becoz I just find hack for gsm only.
anyway, my friend has an unlocked huawei a199 (the cdma slot), how can I dump his ROM and restore it to mine?
thanks. :victory:
CWM recovery
Hello!
Does somebody have CWM or TWRP recovery for this phone?
arifzal said:
Hi
I bought it in China and cannot use the CDMA slot for Indonesia number.
Anyone know how to unlocked CDMA slot in this phone? How to root and change ROM for international use?
Thanks
Click to expand...
Click to collapse
rangerwill said:
i‘m afraid that there’ll be a few custom rom for A199,for the k3v2 cpu,it is special,which needs to confirm the boot.imgfile all the time,unless Huawei would unlock this structure.the models like A199,such as Huawei P6,U9508,Mate,etc all have this sort of question
on Anzhi page ,chinese developers only ported miui for them due to miui uses the same boot file.
you can browse the page.
good luck!
Click to expand...
Click to collapse
I found some posts on the ROM from Chinese Flashing Forum web: shuajizhijia.com/huawei/a199/
Anybody know whether flashing my A199 with one of those ROM will allow the use of other provider's CDMA SIM card?
Thanks.
Ok.. so now I managed to flash my phone with one of the ROM downloaded from Shuajizhi, but my A199 still doesn't read my CDMA card...
Do I need to root my phone first? How can I install gApps on my phone?
Thanks for any help..
I finally got my phone unlocked, now i need to back up NV items... i tried using the NV item reader/writer but the back text files shows "Unknown Error" on all items.. anybody have any other solutions?
AREK28 said:
I finally got my phone unlocked, now i need to back up NV items... i tried using the NV item reader/writer but the back text files shows "Unknown Error" on all items.. anybody have any other solutions?
Click to expand...
Click to collapse
Hi,
How you got your phone unlocked? Can you explain please? I also have A199 with cdma part locked
Hi guys,
I've buy one A199 when I was in China for work 4 months ago , now I'm returned in Europe but my phone company use only 3g and this phone actually use only 2g line.
Now my question are , There is european firmware for this phone?
It's possible to unlock 3g line and /or there are custom roms for european use?
And the last question is , It's possible to add android market? because actually if I download the app, it isn't possible to open
Thanks in advance for your response
bikermao said:
Hi guys,
I've buy one A199 when I was in China for work 4 months ago , now I'm returned in Europe but my phone company use only 3g and this phone actually use only 2g line.
Now my question are , There is european firmware for this phone?
It's possible to unlock 3g line and /or there are custom roms for european use?
And the last question is , It's possible to add android market? because actually if I download the app, it isn't possible to open
Thanks in advance for your response
Click to expand...
Click to collapse
If you mean to use 3g in GSM card slot - no, you cannot, it is only for GSM 900/1800 Mhz, but not for HSDPA 2100 Mhz. CDMA card slot you can use only for cdma 800 Mhz also. As to Google account and market - sure you can. You need to root your phone first with a help of EROOT program . Then use gapps-jb-20121011-signed . I suggest to do this all on clean last firmware version CV100R001C92B130 .
ag70 said:
If you mean to use 3g in GSM card slot - no, you cannot, it is only for GSM 900/1800 Mhz, but not for HSDPA 2100 Mhz. CDMA card slot you can use only for cdma 800 Mhz also. As to Google account and market - sure you can. You need to root your phone first with a help of EROOT program . Then use gapps-jb-20121011-signed . I suggest to do this all on clean last firmware version CV100R001C92B130 .
Click to expand...
Click to collapse
Thanks ag70 ,
now I try to root my phone and install the market
Bricked a199
hello all, i bought this phone online. Now the condition is brick. anyone can give me a solution?
if the power button is pressed, only vibrate once and lcd dead
if connected on a pc, there are no new devices
I can not charge the battery
can you put the phone in recovery mode ?
How did you unlock the gsm slot
Sent from my HUAWEI A199 using XDA Free mobile app
Hello everyone.
I am new to the forum I am from France for 3 years.
I have a technical question about the honor 7 .
I imported china PLK - TL01H version that works very well.
I unlock the bootloader and ROOTE the phone. (Thanks to you).:good:
When I try to install the official rom europe, the installation stops at 90 %.
I need this in order to have Roma French 4g network.
( currently I 'm only H +).
Do you have a tip for me?
Thank you in advance to you.
The Huawei recovery doesn't allow EU roms on Chinese models and vice verca due to the specs of them being different . It might work if you extract the update.app and install it manually via adb though
Sent from my PLK-L01 using XDA Free mobile app
Hi there,
Can you give some more information about this?
I have an european version, but i would like to flash the chinese version.
How can i do that safely so if there is something worng i can go back to stock rom and avoid a brik?
Thank you so much
This is the UNMODIFIED STOCK ROM for the Chinese version of Moto X Pure/Style. Model Number XT1570.
The Chinese variant NEVER moved to Marshmallow. While this ROM is NOT the newest, it is one of later official ROM.
Since entire Google is censored by the Chinese government, this ROM does NOT come with ANY Google applications. Many of the similar function are replaced by (much inferior) Chinese equivalent.
Note that Chinese variant is different from other dual SIM variant in the following way:
1. LTE band is different. This is the only variant I am aware of which support both US/AT&T and China/China Unicom LTE band
2. Chinese variant support Baidu Navigation signal in addition to GPS and GLONASS
Additional hardware detail of Chinese variant is in my other post:
https://forum.xda-developers.com/moto-x-style/help/moto-x-style-chinesevariant-xt1570-t3239240
Download URI Link
https://pan.baidu.com/s/1eSIatzk
Password
uwbj
Notice that by default, the batch file WILL flash stock recovery files. be warned!
Is there any chance of flashing it into a XT1572 firmware and be able to use the other bands? I'm new at this and I'm not sure if is it possible
YisusDeSalta said:
Is there any chance of flashing it into a XT1572 firmware and be able to use the other bands? I'm new at this and I'm not sure if is it possible
Click to expand...
Click to collapse
people in China tried and it was very messy. radio no longer worked property. I advice you against it.
I have flashed Lineage OS CM13. both sim card works. BUT I am not in China at the moment, and China uses a different frequency. So, I can't guarantee if it works or not.
YisusDeSalta said:
Is there any chance of flashing it into a XT1572 firmware and be able to use the other bands? I'm new at this and I'm not sure if is it possible
Click to expand...
Click to collapse
Do it at your own risk.. there are possiblties that
1) 2nd SIM won't work
2)you will end up in bootloop
3)while flashing you might get pre valid fail errors
4) it might get installed but you will get lots of FCS
5) everything will be Chinese so you won't understand anything
Do it at your own risk..
Advice to take backup of your rom via twrp and then proceed (at your own risk)
Sagar_1401 said:
Do it at your own risk.. there are possiblties that
1) 2nd SIM won't work
2)you will end up in bootloop
3)while flashing you might get pre valid fail errors
4) it might get installed but you will get lots of FCS
5) everything will be Chinese so you won't understand anything
Do it at your own risk..
Advice to take backup of your rom via twrp and then proceed (at your own risk)
Click to expand...
Click to collapse
Chinese version of x style is being sold in Iran due to sanctions of American manufacturer. our service center flashes xt1572 retasia ds 6.0.1 official ROM and it works fine in IRAN, Chinese network may vary. they also tried flashing retasia and retla DS 7.0 on xt1570 but sim won't work.
i'm gonna try it myself.
kngharv said:
people in China tried and it was very messy. radio no longer worked property. I advice you against it.
I have flashed Lineage OS CM13. both sim card works. BUT I am not in China at the moment, and China uses a different frequency. So, I can't guarantee if it works or not.
Click to expand...
Click to collapse
Hi, can you share the link for "OS CM13" for download for XT1570, i want to try it.
I am currently on 5.1.1 stock ROM, i need clarification on two things
1. My google maps only works when i try to find something but when i ask for assistance it looses GPS signals while i move. I had tried different location & networks but situation remains the same. So any similar issues or should i change to some other Navigation App. My location is Pakistan.
2. Battery timings with 4G LTE, i am getting approx 8-10 hours. Tried replacing it with new but same results.
Hope to hear from you soon.
I got, to days ago, the B161 (Android 9 + Emui 9) stable version on my Mate 10 Pro BLA-L29 (nordic european).
I'm using two sim, the first one is an italian sim from a virtual operator, the second one is a Vodafone (business) sim.
After a while, i have received a new specific update for the operator I use in the second slot (Vodafone). The update installed itself!
Now, I have the BLA-L29 9.0.0.161 (C432E4R1P11) Emui 9 with a custom version named VDF.IT 9.0.0.6 (LT.F01).
I have never seen an operator custom version installed on a no brand version.
How can I remove this custom version without doing a factory reset?
Thanks to all want help me
NolanBart said:
I got, to days ago, the B161 (Android 9 + Emui 9) stable version on my Mate 10 Pro BLA-L29 (nordic european).
I'm using two sim, the first one is an italian sim from a virtual operator, the second one is a Vodafone (business) sim.
After a while, i have received a new specific update for the operator I use in the second slot (Vodafone). The update installed itself!
Now, I have the BLA-L29 9.0.0.161 (C432E4R1P11) Emui 9 with a custom version named VDF.IT 9.0.0.6 (LT.F01).
I have never seen an operator custom version installed on a no brand version.
How can I remove this custom version without doing a factory reset?
Thanks to all want help me
Click to expand...
Click to collapse
I'm sure a factory reset won't sort it, AFAIK you are stuck with it, unless you are bootloader unlocked, it fancy the FH route.
NolanBart, any succes with debranding?
ghostofcain said:
I'm sure a factory reset won't sort it, AFAIK you are stuck with it, unless you are bootloader unlocked, it fancy the FH route.
Click to expand...
Click to collapse
Did you find solution?
https://forum.xda-developers.com/huawei-p20-pro/help/how-to-carrier-custom-version-update-t3929370
I want to refuse offer to install Custom Version on P20 Pro.
Problem on Huawei P30 Pro [carrier custom patch]
How can we remove such custom patches (carrier custom patches) without rooting?
(I got an update while I was traveling in Singapore. But now I don't need that. EMUI 10 update also contains update for carrier custom patch... I need to remove it before upgrading to EMUI 10)
Can you downgrade (roll back) in hisuite?
Tried my luck on a factory reset and it did remove the carrier config for Starhub SG which automatically installed when I inserted a Starhub SIM. Now I can join beta programs again ?
What carrier config? I use Starhub SIM as well but nothing was installed except APN.
Hi,
I received yesterday a note 10 pro chopin in France. It is th china version with a global Rom (12.5.1) and everything seems to work except ... phoning and messaging services :-(
Does anyone have the same issue ?
I have a SIM card from Red SFR (a french communication company) wich works on other phones. I have also tried the SIM of my daughter in the chopin and the result is the same.
I have tried to manualy search for cellular networks but after trying to serach, the phone says 'Couldn't search for mobile networks'.
I have installed the last miui update 12.5.5 and it didn't change anything.
Does anyone have any idea how to solve it ?
I just sent a message to the seller to inform him of the problem.
I have also checked that the frequencies used by the phone doesn't cover all french mobile frequencies but they have common frequencies at least (3/4 for 4G)
Thank you
You can try to enter the phone information in the dial screen by typing *#*#4636#*#* to set the preferred network type.
This is machine translation
after Installing the Global ROM Vodafone Turkey Is not Working Is there AnySOlution
Can i get CHinies ROM with Google Play + Multi Language Modification
same trouble here(france)only way for now is to flash for china rom and miui 13 problem with sim card is fixed,trouble is no carplay android auto on this rom
playaz187 said:
same trouble here(france)only way for now is to flash for china rom and miui 13 problem with sim card is fixed,trouble is no carplay android auto on this rom
Click to expand...
Click to collapse
China version havnt android auto , and poco x3 gt not detect sim if you flash chines rom , but note 10 pro 5g woeked fine when flash global rom
global rom don t work with french carrier
playaz187 said:
global rom don t work with french carrier
Click to expand...
Click to collapse
try indonessian rom
strike.strong said:
try indonessian rom
Click to expand...
Click to collapse
i ll just give a try same result Orange carrier appear and then No Service,then orange reappear etc etc
fixed with last mui 13 global version work fine