[RECOVERY][ROOT][OFFICIAL] TWRP 3.3.1-X for the Galaxy J727P (J7 Perx) - Samsung Galaxy J7 ROMs, Kernels, Recoveries, & Oth

TWRP has come to the SM-J727P!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the twrp-3.3.1-1-j7popltespr.img.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
Also, on the stock ROM, you MUST format /data before performing any actions, due to the fact that it is force-encrypted by default.
BUGS:
None, as far as I'm aware.
TWRP PAGE
If you appreciate any of what I've done for this device and wish to buy me a coffee or something of the sort, you can donate to me at [email protected] (Paypal)
XDA:DevDB Information
TWRP for j7popltespr, Tool/Utility for the Samsung Galaxy J7
Contributors
minz1
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created 2017-10-22
Last Updated 2019-08-06

As proof:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Virgin mobile galaxy J727P
minz1 said:
TWRP has come to the SM-J727P!
In order to install this, follow these instructions:
Enable OEM Unlock in developer settings
Enter download mode (Press and hold home + volDown + Power when powered off)
Using Odin, click the 'AP' tab and select the twrp-3.1.1-X-j7popltespr.tar file you've downloaded.
Flash the TWRP image, then hold home + volUp + Power
Congratulations, you are now booted into TWRP!
Remember, on the stock ROM, dm-verity is enabled. What does this mean? If you swipe to allow system modifications, you must flash something that disables dm-verity (such as magisk or a dm-verity disabler.)
BUGS:
None, as far as I'm aware.
DOWNLOAD
If you appreciate any of what I've done for this device and wish to buy me a coffee or something of the sort, you can donate to me at [email protected] (Paypal)
XDA:DevDB Information
TWRP for j7popltespr, Tool/Utility for the Samsung Galaxy J7
Contributors
minz1
Source Code: https://github.com/Galaxy-MSM8953
Version Information
Status: Stable
Created 2017-10-22
Last Updated 2017-10-22
Click to expand...
Click to collapse
This is great thank you for all your good work !!?

peter couniaz said:
This is great thank you for all your good work !!
Click to expand...
Click to collapse
There's a button made just for thanking ?

Virgin mobile galaxy J727P
minz1 said:
There's a button made just for thanking
Click to expand...
Click to collapse
One question if I'm rooted do have to flash magisk ?

peter couniaz said:
One question if I'm rooted do have to flash magisk ?
Click to expand...
Click to collapse
No.

Virgin mobile galaxy J727P
minz1 said:
No.
Click to expand...
Click to collapse
So fare so good the only issue I see is the file manager in twrp don't seem to work ! Won't show system or much of anything !

peter couniaz said:
So fare so good the only issue I see is the file manager in twrp don't seem to work ! Won't show system or much of anything !
Click to expand...
Click to collapse
You have to go into "Mount" and mount what you wish to view

Virgin mobile galaxy J727P
minz1 said:
You have to go into "Mount" and mount what you wish to view
Click to expand...
Click to collapse
OK very good thanks !

Thank you!!!

Only issues I have noted are the temp reading and brightness doesn't work, but thank you I love this

does this work with g610y?

So to be clear, do I have to format the phone before flashing any zip everytime?

Tyreethetruth said:
So to be clear, do I have to format the phone before flashing any zip everytime?
Click to expand...
Click to collapse
Nope! Format data once to get rid of Samsung's encryption, then once you flash something that disables dm-verity and force encryption you'll be good.

Tyreethetruth said:
So to be clear, do I have to format the phone before flashing any zip everytime?
Click to expand...
Click to collapse
minz1 said:
Nope! Format data once to get rid of Samsung's encryption, then once you flash something that disables dm-verity and force encryption you'll be good.
Click to expand...
Click to collapse
So format data before flashing twrp via odin then flash magisk or format after flashing twrp then flash magisk? Also will flashing supersu also disable dm-verity?
EDIT: I figured it out, thanks for bringing TWRP to this device! Now lets see who can bring lineage(preferably oreo) to this phone.

Tyreethetruth said:
So format data before flashing twrp via odin then flash magisk or format after flashing twrp then flash magisk? Also will flashing supersu also disable dm-verity?
EDIT: I figured it out, thanks for bringing TWRP to this device! Now lets see who can bring lineage(preferably oreo) to this phone.
Click to expand...
Click to collapse
Don't you worry, Lineage is in the works

Where the roms at

Virgin mobile galaxy J727P
jaydriod26 said:
Where the roms at
Click to expand...
Click to collapse
If you want you can try my Deodexed Rom but I'm not a true developer it has one bug so far Auto replace for text does not work so fare ! So give me time an give minz1 some time thank you !

I try and test it out where the link

So would it be a good idea to flash this bootloader on a sm-j727v? Or would it just bootloop? We need root and twrp to lol

Related

[LG-F460 Recovery][JZShminer] UNOFFICIAL TWRP 3.0.0-0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
TWRP 3.0.0-0
JZ kernel stock 6.0
double tap wake
vibrator
F2FS
alucard hotplug and alucard cpu governor
TWRP SOURCE LINK
Download link(IMG&&ZIP)
rename the *.img to recovery.img and push to the sdcard
Code:
adb shell
su
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
exit
exit
adb reboot recovery
Or use any recovery to flash it.
XDA:DevDB Information
UNOFFICIAL Team-Win-Recovery-Project for LG-F460, Tool/Utility for the LG G3
Contributors
shminer, Teamwin
Source Code: https://github.com/shminer/android_device_lge_F460/tree/TWRP-MM
Version Information
Status: Stable
Current Stable Version: 3.0.0-0
Stable Release Date: 2016-03-07
Created 2016-03-07
Last Updated 2016-03-07
Reserved
20160308 changelog
update:fix slow wipe.
Hey Shminer,
is it possible to mount the encrypted data partition with your customized TWRP Version?
The official 3.0 TWRP is unable to locate the crypto footer of the data partition.
Thank you sir
AnySniper said:
Hey Shminer,
is it possible to mount the encrypted data partition with your customized TWRP Version?
The official 3.0 TWRP is unable to locate the crypto footer of the data partition.
Click to expand...
Click to collapse
I am sorry, I disabled encrypt kernel config in my kernel and remove fstab encryptable.
Most people do not need it, causing slow.
Thanks Shminer! Once again you prove that you rock the house for our obscure little devices
I can't seem to find the zip in the dl link provided in the op.
Sent from my LG-F460K using Tapatalk
How to go to recovery using keys i cant figure it out it just dont go help please
harib12 said:
How to go to recovery using keys i cant figure it out it just dont go help please
Click to expand...
Click to collapse
If you have a F460K I do it by holding volume down with power, then when you see the lg logo IMMEDIATELY let go of both and press and hold volume up with volume down. It takes some good (fast) timing but works.
I hear the F460S is volume up with power instead but can not confirm personally.
just lost my recovery (can't boot into recovery mode anymore) after flashing this on stock 6.0. How can i solve this? bro.Tks in adv
Good evening
Could you confirm that it could flashed with flashify?
My understanding it is for MM. Thanks for confrmation.
Thanks in advance for your huge job
How to install this? Sorry I'm a newbie
Can you please provide a zip format.
duyz said:
just lost my recovery (can't boot into recovery mode anymore) after flashing this on stock 6.0. How can i solve this? bro.Tks in adv
Click to expand...
Click to collapse
All of custom kernel and recovery based on 4.4 bootloader.
Try to flash 10X KDZ or TOT and flash recovery
Xtian2.Xtian2 said:
Good evening
Could you confirm that it could flashed with flashify?
My understanding it is for MM. Thanks for confrmation.
Thanks in advance for your huge job
Click to expand...
Click to collapse
Must be 4.4 bootloader.
Bangash737 said:
Can you please provide a zip format.
Click to expand...
Click to collapse
yep, there is two format file(zip and img)
shminer said:
Must be 4.4 bootloader.
yep, there is two format file(zip and img)
Click to expand...
Click to collapse
I could not find zip file there is only .img file in download section, and tell me whether i install this recovery over CWM recovery? Thanks for your help
Bangash737 said:
I could not find zip file there is only .img file in download section, and tell me whether i install this recovery over CWM recovery? Thanks for your help
Click to expand...
Click to collapse
sorry, androidfilehost folder has been updated
shminer said:
[/QUOTE]
Thanks! it worked for me.
Click to expand...
Click to collapse
need full LG G3 F460 MM in single thread
shminer said:
sorry, androidfilehost folder has been updated
Click to expand...
Click to collapse
please make a seperate thread for F460 stock,root,custom recovery, xposed. i am google for 2 days but information not at availble at one place. all koresans,vietnam language killing me.
please tell me stock 30c rom rooting,recovery flashing procedure with links.
There are no way to root stock MM yet AFAIK... the only way i think people should do is to flash stock LP, root stock LP, install recovery then flash any MM rom that suit themself... i myself prefer mokee at the moment...

[UB][RECOVERY] TWRP v3.7.0 for Xperia X

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL DOWNLOADS FOR SUZU:
https://twrp.me/sony/sonyxperiax.html​twrp-3.x.x_x-x-suzu.img: Official TWRP image​
DEVELOPMENT DOWNLOADS FOR SUZU:
Folder: https://sourceforge.net/projects/loire-development/files/twrp-recovery/suzu/​twrp-3.x.x_x-x-YYYYMMDD-suzu.zip: Flashable unofficial TWRP to FOTAKernel​twrp-3.x.x_x-x-YYYYMMDD-suzu.img: Unofficial TWRP image​
INSTALLATION
MANUALLY TO FOTA​Fastboot: Adapt the image name and install this way:​fastboot flash recovery twrp-3.x.x_x-x-suzu.img​fastboot reboot​​FROM EXISTING RECOVERY​
Enter to the current recovery
Install flashable TWRP
Reboot/Power off
HOW TO ENTER TO THE RECOVERY:
Power off your phone
Press Power and Vol- buttons at the same time until vibration
Wait for TWRP load
Sources:
TWRP device tree: https://github.com/TeamWin/android_device_sony_suzu/tree/android-9.0​Kernel: https://github.com/Chippa-a/kernel-copyleft/tree/34.4.A.2.xxx​Thanks to the TWRP Team!​
Backup-Restore function working fine so far, only issue I am seeing is phone is heating up pretty faster than before while backing up in compression mode.
Another minor thing is that earlier when entering recovery mode a purple light used to blink, now its missing.
Just saw this now and I'm really grateful. Big ups to you, man. Great work.
And I was afraid there would be no 3.2.1 for this device; 
 @Chippa_a makes it possible - intensified thanks! :highfive::good::good:
Thank you!!
I can't flash the zip because twrp does not give access to that part of the storage, weird.
fusk said:
I can't flash the zip because twrp does not give access to that part of the storage, weird.
Click to expand...
Click to collapse
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Updated from TWRP, backup/restore works, no problems so far apart from it needs more than a minute till TWRP GUI appears after boot. Thanks for update.
Do you use the stock kernel? I installed the recovery built by oshmoun in the omnirom thread. It uses the aosp kernel. It starts faster, has a better sdcard naming and can flash oem images. Maybe you could try this kernel.
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
I mean the kernel used with the recovery, not the rom kernel.
I_am_Blackford said:
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Click to expand...
Click to collapse
This is what i did. Download img, place file on phone. Download twrp app, pick choose a file, browse to recovery.img, flash. Power off, boot to recovery = win.
Reboot to system, retry installing new update = great success.
mase76 said:
I mean the kernel used with the recovery, not the rom kernel.
Click to expand...
Click to collapse
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
privatim said:
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
Click to expand...
Click to collapse
I dont know if there is a connection, but i've tested the recovery with OmniROM 7.1.2, where display is not responding. It can be installed, shows 3.2.1, but display remains dead 4 touch.
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
mase76 said:
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
Click to expand...
Click to collapse
Same result, whether fastboot or flashtool, display is dead.
Certainly missed ODM LOIRE v12, v11 is installed.
Not really sure is the latest bootloader.
Does restoring a backup change the bootloader as well?
Edit: Solved: the answer is 'yes'.
3.2.1 does not work @7.1.2 restore because of outdated bootloader.
privatim said:
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
Click to expand...
Click to collapse
Moved to XGEN ROM and now TWRP starts without delay. :good:
privatim said:
Moved to XGEN ROM and now TWRP starts without delay. :good:
Click to expand...
Click to collapse
What I do not understand, maybe bootloader or encryption, but why is 3.2.1 not backwards compatible on Suzu?
Is Omni 7.1.2 kernel (more I have not tried) or not current boot loader the reason?
Installed on last nougat internal storage 0 help
Inviato dal mio F5121 utilizzando Tapatalk
I'm glad that you finally managed to crack this damn decryption. I felt really bad with my broken promise of delivering the working build. I'm sorry, guys. @Chippa_a congratulations on your hard work

RedWolf Recovery Project Oneplus 5T Dumpling

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING
I am not a developer. I am a Carpenter who likes tinkering with android.
I am not responsible for bricked devices, dead SD cards,corrupted SD cards
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.​
Red Wolf Recovery is custom recovery based on TWRP source code however some things are working here slightly different then you might expected. The main objective of this project is to provide stable recovery with features which you have never seen before in a recovery and which have not been accepted for adding to the official source code of TWRP. This recovery is also first recovery on the world with password protection.
​
DOWNLOADS​
http://www.mediafire.com/file/iedk5oezgia6qfh/RedWolf-027-Unofficial-dumpling.img​
THANKS​
RedWolf Recovery for sources
SimonSickle for the tree
​
SOURCES​
https://github.com/TeamWin/android_device_oneplus_dumpling​
https://redwolfrecovery.github.io/​
XDA:DevDB Information
RedWolf Recovery Project, Tool/Utility for the OnePlus 5T
Contributors
cospalet
Version Information
Status: Stable
Created 2018-06-22
Last Updated 2018-06-21
I would like to give credit to z31s1g for the theme if you are on regular twrp you can get his theme here
https://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
And while your there please give him a thanks
This right here was enough to here me to switch permanently. Thanks man! Its great to see some new recoveries
dakotah2468 said:
This right here was enough to here me to switch permanently. Thanks man! Its great to see some new recoveries
Click to expand...
Click to collapse
Is that working? And is it fully functional anyway?
The encryption/decryption options are really confusing here.
If I am decrypted and wants to remain decrypted even after flashing a new rom, which all options should I select? And if options are selected, then there is no need to flash no-verity zip, right?
Wow
RedWolf have Disable Force Encryption option, but i don't think it working... (Mi6 already released RedWolf TWRP, and i checked this option. but mi6 still encryping at first boot... i think decryption user still need flash no_verify_op5_v2 everytime)
anyone can confirm this?
Look very nice.
Garry050 said:
RedWolf have Disable Force Encryption option, but i don't think it working... (Mi6 already released RedWolf TWRP, and i checked this option. but mi6 still encryping at first boot... i think decryption user still need flash no_verify_op5_v2 everytime)
anyone can confirm this?
Click to expand...
Click to collapse
Yes confirmed, still need to flash no verity.
A really cool feature is the subs overlay wipe.
I can attest to having to flash no_verity. I tried with dmverity enabled and disabled and my ROM didn't boot either time. Flashing no_verity remedies it. Great work though. Nice to see people pushing the options to a new level.
Sent from my OnePlus5T using XDA Labs
This TWRP has one more festure-
You can view the queue of all the installation files.
cannot reboot into recovery, phone just freezes
zain0300 said:
cannot reboot into recovery, phone just freezes
Click to expand...
Click to collapse
Yeah that happened to me. Just hold the power button till it turns off then hold power and volume down button to boot back into recovery.
Sent from my OnePlus5T using XDA Labs
i dont know if its with me alone but when i try to reboot when im i recovery the recovery freezes exept when i check reboot when instalation is completed
Wonderful job! I'm amazed, thank you!
Finally a great tool for this great device! Thank you, SIR!
bdwilk said:
Yeah that happened to me. Just hold the power button till it turns off then hold power and volume down button to boot back into recovery.
Click to expand...
Click to collapse
yeah I was able to reboot it. I was just reporting a bug so the op can look into it.
Xokoz said:
Is that working? And is it fully functional anyway?
Click to expand...
Click to collapse
Haven't flashed a new from yet
I flashed stock OB10 thru this recovery and after that, I did not have to flash TWRP again. This TWRP was not overwritten by stock recovery. Thats a +.
ganeshbiyer said:
I flashed stock OB10 thru this recovery and after that, I did not have to flash TWRP again. This TWRP was not overwritten by stock recovery. Thats a +.
Click to expand...
Click to collapse
I can confirm your statement

***DISCONTINUED***[RECOVERY][UNOFFICIAL][a50s][R]TWRP Recovery 3.5.1-9-0 for Samsung Galaxy A50s (SM-A507)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP is an open source, community project. A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like LineageOS or OmniROM.
Disclaimer
I'm not responsible if something went wrong on your phone(Usually nothing goes wrong). You are doing this on your own responsibility. Rooting your phone may void warranty so don't root your device unless you know what you are doing.
Downloads
Spoiler: Dead link - Moderator
CLICK HERE
Installation
HERE, thanks to @redymedan
TWRP Changelog 3.5: https://twrp.me/site/update/2021/03/17/twrp-3.5.1-released.html
Key Combos
Download Mode - Turn off device, Press and hold [vol + & vol -] connect usb to PC
Recovery Mode - Turn off device, Press and hold [vol + & Power] release power button after screen on, continue pressing [vol +]
Magisk System - Turn off device, Press and hold [vol + & Power] release both keys after screen on
Credits And Thanks:
Allah SWT.
My beloved parents, family, and my friends either in real life or social media
TWRP team for developing TWRP recovery
Linux; Samsung for kernel source
@halcyon441 @Synt4x.93 @ianmacd for references
@el0xren for promotion
@redymedan for supporting me
And more! Tell me if I forgot something
Spoiler: Dead links - Moderator
Device Tree: https://github.com/hdr-mn/android_device_samsung_a50s_twrp
Kernel source: https://github.com/hdr-mn/android_kernel_samsung_a50s_twrp
Telegram device support group: Link removed by moderator
TWRP site : https://twrp.me/
Thanks for using my built of recovery, hope you enjoy it. Bug report is open! PM me in Telegram: @hendramanu.
Stay healthy!
Reserved - Changelog
Reserved - News & others
root is lost after reboot if magisk hide is used, is there any fix for this?
AntiCheatBot said:
root is lost after reboot if magisk hide is used, is there any fix for this?
Click to expand...
Click to collapse
Hello! Sorry for late reply.
Can you tell the issue more details? Thanks.
AntiCheatBot said:
root is lost after reboot if magisk hide is used, is there any fix for this?
Click to expand...
Click to collapse
enter TWRP recovery then select Reboot - Recovery
hendramanu said:
Hello! Sorry for late reply.
Can you tell the issue more details? Thanks.
Click to expand...
Click to collapse
Please make MTP worked in GSI rom LOL
redymedan said:
Please make MTP worked in GSI rom LOL
Click to expand...
Click to collapse
Okay lol. Maybe forgot
redymedan said:
enter TWRP recovery then select Reboot - Recovery
Click to expand...
Click to collapse
thank you this worked, should I avoid using standard reboot always? because each time my phone becomes unstable until it sort of crashes (samsung logo, can't unlock) and root is lost.
Hendramamu sorry I should say that first I am super grateful you made this, I am very happy that I can use root and the root was lost after I rebooted but only if I turned on magiskhide (it would right away become unstable and apps would crash until Samsung logo appeared and it would crash more and more often until I cant unlock, then if I restart I would have root lost). but with TWRP -> reboot recovery, everything now works including my mobile banking so THANK YOU very much for making this and redymedan for the instructions
AntiCheatBot said:
thank you this worked, should I avoid using standard reboot always? because each time my phone becomes unstable until it sort of crashes (samsung logo, can't unlock) and root is lost.
Hendramamu sorry I should say that first I am super grateful you made this, I am very happy that I can use root and the root was lost after I rebooted but only if I turned on magiskhide (it would right away become unstable and apps would crash until Samsung logo appeared and it would crash more and more often until I cant unlock, then if I restart I would have root lost). but with TWRP -> reboot recovery, everything now works including my mobile banking so THANK YOU very much for making this and redymedan for the instructions
Click to expand...
Click to collapse
Hey!
Maybe because System-As-Root, but I forgot if system-as-root must reboot to recovery first to gain rooted system.
Thank you very much! ^_^ Glad if this helped
For now all of my projects source, including this one, is dead. Will recover it later.
'K thx
The TWRP is buggy, it gets randomly rebooted so I reverted it back to 3.3
3.3 is not capable of flashing fresh core kernel but TWRP 3.5 works, still useful tho
download link is dead
Any chances for TWRP 3.6? Would be really cool. I have some issues with 3.5.1
As the author has been inactive for quite some time, and it seems his user profile on Github has either been deleted or made private, I am marking this project as Discontinued and closing this thread.

Development TWRP for Samsung Galaxy A7 Lite SM-T220 SM-T225 SM-T227

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Remember this is in early development (alpha)
Not Working:
> Adb Sideloading
> Vibration (minor issue)
> Other Problems: Sometimes when you boot recovery touch not works and only solution is to re-flash TWRP again from Odin, this is kernel issue, we need custom kernel. I found out that in that case you can reboot with usb otg and mouse connected and twrp could start working on next reboot.
Install Instructions
Flash TWRP from Odin on AP Slot & Hold Volume Up + Power while flashing until TWRP appears.
Go to Advanced > Terminal and type "multidisabler" (without quotes", then data wipe.
Now reboot into system, after completing first setup of the device reboot into TWRP again to see if you can see the contents of your Internal Storage, you should, if yes you have successfully disabled Samsung encryption of internal storage.
Downloads (SM-T220): https://github.com/Skorpion96/android_device_samsung_gta7lite/releases/
Downloads (SM-T225): https://github.com/DevZillion/android_device_samsung_gta7lite/releases/tag/v0.1.0_T225
Downloads (SM-T227): https://github.com/DevZillion/android_device_samsung_gta7lite/releases/tag/v0.0.0_T227
Credits to me obviously for testing and recovery tree: https://github.com/Skorpion96/gta7lite_recovery
and to https://github.com/DevZillion for helping with TWRP.
Sources:
Device Tree:https://github.com/Skorpion96/android_device_samsung_gta7lite/tree/main
TWRP:https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
Kernel - Samsung's Stock Kernel built from source.
Flash twrp with Odin which slot ...AP yes Thanks
tom.android said:
Flash twrp with Odin which slot ...AP yes Thanks
Click to expand...
Click to collapse
yes i'll add at the post
Skorpion96 said:
yes i'll add at the post
Click to expand...
Click to collapse
There's one thing not clear enough from the instructions. It says we download the multidisabler...but where do we put it? Or is it already integrated within the TWRP functions?
nirogu325 said:
There's one thing not clear enough from the instructions. It says we download the multidisabler...but where do we put it? Or is it already integrated within the TWRP functions?
Click to expand...
Click to collapse
yes i'll fix
Skorpion96 said:
yes i'll fix
Click to expand...
Click to collapse
That's ok. I will wait until hopefully we get a custom kernel. Touch function didn't work on the first try and when I rebooted back into the GSI, I noticed I could not lower the notification panel as if touch was disabled for that part.
@nirogu325 post fixed
This is in too early development
Zillion said:
This is in too early development
Click to expand...
Click to collapse
added
I'll be adding releases here if SKorpion96 doesn't I don't own the device so don't expect a lot of releases from me.
Releases · DevZillion/android_device_samsung_gta7lite
Contribute to DevZillion/android_device_samsung_gta7lite development by creating an account on GitHub.
github.com
SM-T225 Samsung firmware no root .
Can't showup twrp during flash with odin and press power + volume up simultaneously.
You'll require Magisk v24 Patched AP tar to be able to boot into twrp
Edit: Add the file to AP slot and click Flash on Odin. Start Holding Volume Up + Power until the unlocked bootloader warning appears. Then press Power to remove it and wait for twrp to boot.
tom.android said:
SM-T225 Samsung firmware no root .
Can't showup twrp during flash with odin and press power + volume up simultaneously.
Click to expand...
Click to collapse
patch firmware with magisk
Skorpion96 said:
patch firmware with magisk
Click to expand...
Click to collapse
Magisk v25 or higher will not work.
Booted into recovery but no touch
Difficul said:
Booted into recovery but no touch
Click to expand...
Click to collapse
touch bug, reflash twrp and boot into it again
Difficul said:
Booted into recovery but no touch
Click to expand...
Click to collapse
Maybe we need a t225 specific kernel, the actual kernel is from t220
Zillion said:
Maybe we need a t225 specific kernel, the actual kernel is fro t220
Click to expand...
Click to collapse
but difference between two tablets is sim support, touch shouldn't be an issue. anyway let's see if lapchong would compile kernel of t225
Zillion said:
Maybe we need a t225 specific kernel, the actual kernel is fro t220
Click to expand...
Click to collapse
Of T225 is MT8768T
But in line 3 of system prop is mt6765
Difficul said:
Of T225 is MT8768T
But in line 3 of system prop is mt6765
Click to expand...
Click to collapse
I'll check later. I need t225 and t220 stock recoveries

Categories

Resources