So, some of you might have noticed that I made some thread in General section, for Oreo TWRP Backup.
Some people do not like this idea, therefore I created a TWRP flash-able .zip for that.
I recommend a full wipe, or even a format data before flashing this.
Download the 3 zips, flash in order, boot, enjoy.
The files are stamped with a number, so you know what to flash in which order. Easy right ?
There is no root. I've heard SuperSU works flawlessly, but did not try as I am fine without it.
Downloads :
ROM:
https://drive.google.com/open?id=1zlFu-U2hxy2fvrkrHfZwxRMfZOBNSCoy
DmVerity:
https://drive.google.com/open?id=1AO3IgiJCDPtZD1LuS7T8viizjBGwVCWK
Fix:
https://drive.google.com/open?id=1PsMUCPOzQm6d8YS2SP9tpyK1_hgIqjiG
FOR DEVS : Beta 2 Partitions Dump feel free to use this, however please do credit me in your Aroma and XDA threads : https://drive.google.com/open?id=1RTzxthFvrV6-yU9yDwkceTGpF5srcTO7
Thanks to ambasadii, for his updater-script that I based this on.
what is the difference between the flashable and the partitions dump ?
knox
Will this trigger knox?
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
austriacus said:
what is the difference between the flashable and the partitions dump ?
Click to expand...
Click to collapse
No difference at all.
popmpopm said:
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
Click to expand...
Click to collapse
No, TWRP Flashable.
raj_p said:
Will this trigger knox?
Click to expand...
Click to collapse
This requires TWRP; if you have TWRP then your knox is already tripped.
@Paradoxxx
Please add step-wise guide to avoid confusion for people (whether to flash using Odin or TWRP).
Thank you. It has been very beautiful. everything works.
madnav said:
This requires TWRP; if you have TWRP then your knox is already tripped.
@Paradoxxx
Please add step-wise guide to avoid confusion for people (whether to flash using Odin or TWRP).
Click to expand...
Click to collapse
I added a big TWRP with bold and underline. That should do
ok nice but add TWRP in title
Any specific bootloader I have to be on? I'm on AQJ1 now...
Sent from outer space
cop1976 said:
Any specific bootloader I have to be on? I'm on AQJ1 now...
Sent from outer space
Click to expand...
Click to collapse
Should be working. If not AQH3 will do.
Does locking the phone work correctly?
Thanks
Downloading.
Which version od SuperSU will work? 2.85 or? If someone tested. If not, I'll test it by myself B)
How to enter recovery after flashing this rom? Bixby + vol up not working for me
Sent from outer space
Hi,
I'm a bit confused, how can i do to go back to stock firmware after installing this ?
Thanks
Anyone able to enter settings in Samsung mail?
For me, when pressed it takes you back to the inbox.
popmpopm said:
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
Click to expand...
Click to collapse
He hasn't used the term Odin but TWRP, if you're dyslexic or simply haven't been taught how to read don't post.
Hi flashing that update last nite on stock firmware BTU S8 boot ok but all apss and touchwiz crash all time no way to work so reflash with odin stock firmware.
maciejireland said:
Hi flashing that update last nite on stock firmware BTU S8 boot ok but all apss and touchwiz crash all time no way to work so reflash with odin stock firmware.
Click to expand...
Click to collapse
I have flash the 3 files and all perfectly work on my G950F, before i was on AQH3 XEF (France). Samsung health work, secured folder too. I juste have a "problème", it's that we can't install update by OTA. If your phone with this files crash, it's maybe because you don't have wipe with twrp before.
A bit of new stuff :
Lock screen security fixes :
950F:
https://drive.google.com/open?id=1PsMUCPOzQm6d8YS2SP9tpyK1_hgIqjiG
955F:
https://drive.google.com/open?id=1_rC4jnWEpd74shw_QzFbLmuz6yEiBqmh
Related
The same as stock + root.
ROM:
http://speedy.sh/qYeq2/C5303-Generic-12.1.0.1.201-signed.zip
Mirror:
https://mega.co.nz/#!boIBHLjR!qsnN28c9xqTMq562a2lgQ6AdZVlgL4uqJZBVU75lKGk
Kernel (for flashtool after install rom)
http://speedy.sh/rFurz/C5303-12.1.A.1.201-kernel-only.ftf
Mirror:
https://mega.co.nz/#!zo4HxQQa!-rVewRUW0xcOz8WFxhfOnBR1RyjsIOknQlZ6sIPGDDA
STEPS:
Download the .zip file (see downloads)
Put the pre rooted firmware + SU zip into your internal SD
Flash both files and turn the phone off
Open flashtool into flashmode
Flash 201 kernel
Reboot device
Done
Than'k
Could you upload it with something else (for example https://mega.co.nz or http://d-h.st/) because I don't have a premium acount on speedy share, and I dont want to bloat my computer with their download assistant .exe file...
What kind of fw is this? Generic Europe? Generic Global?
Thanks for sharing!
could anyone confirm this one ?
Thank'd.
Btw, how do you make the kernel only ftf? I know how to make a full ftf and extract the kernel.sin from it. Then how to make the ftf from it? Or.. any other way? Thanks in advance.
any other link ?
because i dont have premium account.
thanks
Well no need for me to update my thread..... (kidding)
Nice work mate
the more devs we have the better the community
"Put the pre rooted firmware + SU zip into your internal SD
Flash both files and turn the phone off"
Flash ?? So i need recovery in my SP with .206 ???
AdamBialas said:
"Put the pre rooted firmware + SU zip into your internal SD
Flash both files and turn the phone off"
Flash ?? So i need recovery in my SP with .206 ???
Click to expand...
Click to collapse
It is a pre-requisite that customised or cooked roms need root & recovery to install...
Im still using Stock rom .245(4.1) rooted with CWM. Do i still need to install .254(4.1) and .266(4.3) before flashing this rom and kernel? thanks in advance
cidane said:
Im still using Stock rom .245(4.1) rooted with CWM. Do i still need to install .254(4.1) and .266(4.3) before flashing this rom and kernel? thanks in advance
Click to expand...
Click to collapse
I don't think so. I have flashed a few cooked (current) ROMs with .254 rooted + CWM. What matters is having CWM to flash the ROM which comes in zip files...In fact, I had to downgrade to .254 in order to root + CWM to flash
so to correct my understanding
ROM in OP is pre-rooted but Kernel in OP is stock kernel without root?
Exactly what are the changes in this FW
I mean geez Sony only put -_- battery improvements, software enhancements and are really very generic changes
thanks
Revontheus said:
Exactly what are the changes in this FW
I mean geez Sony only put -_- battery improvements, software enhancements and are really very generic changes
thanks
Click to expand...
Click to collapse
Did you really expect them to say "Basically the same ROM without all the stuff ups we forgot to fix prior to releasing it"?
noonereallycares said:
Did you really expect them to say "Basically the same ROM without all the stuff ups we forgot to fix prior to releasing it"?
Click to expand...
Click to collapse
No, At least they should've given the exact things they fixed liked the "App Installation Animation is fixed" instead of saying "Various System Improvements". It seems so general
headache59 said:
I don't think so. I have flashed a few cooked (current) ROMs with .254 rooted + CWM. What matters is having CWM to flash the ROM which comes in zip files...In fact, I had to downgrade to .254 in order to root + CWM to flash
Click to expand...
Click to collapse
so do I still need to update to .254? im still .245 firmware
ahmedhappy312 said:
so to correct my understanding
ROM in OP is pre-rooted but Kernel in OP is stock kernel without root?
Click to expand...
Click to collapse
Can anybody answer my question plz
Sent from my C5303 using Tapatalk
ahmedhappy312 said:
Can anybody answer my question plz
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Yes it is.
Did you change anything in the ROM apart from rooting it? There are some files missing compared to my german .201 version. I don't know if there are more files than the bloatware ones, it was just a short look into it.
anyone experience unknown baseband and wifi problem after flashing?
Hi all, i'm pleased to share my work with you.
Here you have the latest official lollipop firmware for D855 ( v. 20A - LRX21M) packed in a zip flashable file.
I made this because all of us want to keep the old bootloader that is - at the moment - the only one who accept the bumped TWRP provided us by team Codefire.
I made also a step further and found a way to root this ROM.
Here you go:
First of all i suggest you to install the TWRP modded by me to allow the backup of the modem.
Be sure you select also the modem partition before taking the backup. ( If you want to restore the backup then restore also the modem )
1- download the two files and put them into the sdcard;
2- reboot in recovery and do a factory reset;
3- install the ROM and the supersu ZIP;
4- reboot the device and enjoy your rooted Lollipop ROM.
If you come from an earlier lollipop firmware you can dirty flash, it might work.
I spend a lot of time developing this so if you think i deserve you can donate ( look at my sign )
DOWNLOAD
SUPERSU flashable ZIP
ROM
MIRROR
KK MODEM ( you need this only if you downgrade from lollipop to kitkat and you don't need if you backed up before with the modded TWRP recovery)
DONATORS:( really tnx guys)
GTMoraes, tobitege, shaboogen, pRo_lama, hnyuk49, rossonero82, spotlight79, TeamSlayr, Vegard Helland, Mishaal Almashan, Sagar Singh, PAPPL, ArubidCo, bigmupps
CREDITS:
teamcodefire, chainfire
Changelog:
- 13.11.2014 - updated to the official LRX21M - 20A ( poland FW )
Q&A
What this ROM include?
In the ROM zip you can find only the system, modem and kernel (bumped) image
What do i need to flash this?
You need only to have the TWRP recovery installed
If i flash this i will lose the bumped recovery?
Nope. The bootloader will not be changed.
If i want go back to KK roms ( stock or AOSP) what i have to do?
Just flash your ROM or restore a previous nandroid backup. But, after that, flash the zip with the KK modem you can find in the 1st post.
I really need to flash the root files?
Must i answer????
Cannot write to internal SD?
With adb or a terminal emulator do:
Code:
su
restorecon -v -R /data/media
Your statusbar and navbar are gone?
This is a issue reported from some user.
Try to format manually data in TWRP before install the rom.
If this doesn't work try flashing the kdz of the H firmware ---> root ----> twrp ----> install this rom ( sperimental).
Doesn't have the option to enable LTE?
Go with a root browser to system/app/Lteconfigs/, click and install the apk, then reboot and you will have the option for LTE.
Wwooiootttttt?????
Things to do today: f5
@Skin1980: You definitely deserve some beers (or whatever you like ) 0F714082VL945954E
THANK YOU!!
You absolutely rule. Thank you
tobitege said:
@Skin1980: You definitely deserve some beers (or whatever you like ) 0F714082VL945954E
THANK YOU!!
Click to expand...
Click to collapse
Like i said in the other post really tnx. My wife and my childs are gonna kill me for the time spent on the PC!
Now this is the stuff. Maybe this G3 wasn't a bad choice after all. Beer (or some wine to keep the wife happy) incoming when I'm not at work
beast.
thank you! could you possibly link to the tot/kdz you used to downgrade from lollipop to kitkat?
What kernel do you use for rooting? 4.4 or custom?
Wait wut? So this is all done in the stock recovery? No root, no custom recovery needed? Just bang it all on the sd card and go?
rhystagram said:
beast.
thank you! could you possibly link to the tot/kdz you used to downgrade from lollipop to kitkat?
Click to expand...
Click to collapse
exactly this http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW784506432109876543213/D85510H_00.kdz
agelus69 said:
Wait wut? So this is all done in the stock recovery? No root, no custom recovery needed? Just bang it all on the sd card and go?
Click to expand...
Click to collapse
TWRP is needed my friend
yocasta said:
What kernel do you use for rooting? 4.4 or custom?
Click to expand...
Click to collapse
I patched the stock kernel...
5PP44527BR123160Y
Beer your way mate. Thanks for your help.
D.S
super work :good:
But be careful at the modem!!! It was not compatible with our country
Skin1980 said:
I patched the stock kernel...
Click to expand...
Click to collapse
Sweet, great news!
Sorry for this question but after flashing this rom via bump twrp can we go back to KK Aosp by flashing it back? Or do we need to connect to a PC to restore back to stock fw?
Rman666 said:
super work :good:
But be careful at the modem!!! It was not compatible with our country
Click to expand...
Click to collapse
The D855 is the international version.
The modems are interchangeable.
D.S
Nice job. Thank you. (ID: 6MC15224ET241474H)
I need help to unbrick my phone. Here are the details of my phone and things I did before it became useless.
- Version: Updated version of Samsung Galaxy S6 Edge Marshmallow Android 6.0.
- replaced its recovery with TWRP via odin (3.10.6)
- install a ROM with the use of TWRP recovery.
- After rooting my phone and flashing a new rom via TWRP, I can't use my phone's physical buttons.
I also tried full-wipe installation of Custom rom and I got the same issue. I tried restoring it to a stock rom, but it always says "Fail".
Do you guys have any suggestions how can I fix my phone?
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
callumbr1 said:
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
Click to expand...
Click to collapse
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
lexeroy said:
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
Click to expand...
Click to collapse
Have you flashed the stock firmware you just posted?
callumbr1 said:
Have you flashed the stock firmware you just posted?
Click to expand...
Click to collapse
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
lexeroy said:
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
Click to expand...
Click to collapse
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
callumbr1 said:
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
Click to expand...
Click to collapse
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
lexeroy said:
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
Click to expand...
Click to collapse
I will pm you the link.
Ohhhh thanks man! Finally this BTU firmware worked to my phone! ???
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
lexeroy said:
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
Click to expand...
Click to collapse
I suggest TWRP. Make a full Nandroid back up before just incase. But if anything goes wrong you can just flash that stock back to fix.
I would root first with cf autoroot.
Then flash your ROM.
Do a full wife when rom installer asks as this is safest way.
If it bootloops just wait.
Glad i can help
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
lexeroy said:
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
Click to expand...
Click to collapse
It is compatible im using it mate. Did you do a clean install? Wipe data when installer asks? My first boot took around 30 mims
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
lexeroy said:
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
Click to expand...
Click to collapse
Which kernel did you install when the installer asked you? Yeah id say its probably the most stable rom for s6 edge.
Did you do full wipe in aroma?
Odin Flashable Android 8.0.0 Oreo Stock Firmware.
Only for Exynos G950F and G950FD variants. For Galaxy S8+ visit here - https://forum.xda-developers.com/galaxy-s8+/development/rom-galaxy-s8-t3749444
Instructions -
1. Extract zip.
2. Open Odin 3.13.1 and place AP, BL, CP, and HOME_CSC/CSC.
3. Start and wait for the device to reboot.
4. Done!
Note - Use Odin 3.13.1 only for new firmware.
Downloads -
Official Oreo Odin Flashable CRGB - https://drive.google.com/open?id=1OkYK8Z3KPbm9ftJpQ-5yN0DyZpnUNS9f
Odin 3.1.3.1 - https://drive.google.com/open?id=19a2IW8SOFIUy7sDxZQTDo1YcnbXFFEXd
Installation video -
Credits -
@murtaza02 for his guide - https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555
Press the thanks button if you want to:silly:
What about CSC? I only see Home_CSC. I will try it as soon as possible. Thank you for uploading it
:good:Thanks for ROM it!!!
Nice work!!
thanks!
downloaded and installed. works flawlessly although I assumed it would wipe my data (running Batman 1.5) but it didnt and instead upgraded to Oreo without a single glitch while retaining all my data. will monitor over the next couple days to see if the "dirty flash" affects any functionality and battery life and revert.
EDIT: lost my root access as expected of course.
.I've also been with me in 10 minutes without any mistake, keeping the data 100%
mateoo337 said:
What about CSC? I only see Home_CSC. I will try it as soon as possible. Thank you for uploading it
Click to expand...
Click to collapse
I used HOME_CSC because CSC would wipe the data.
How I can flash without wipe? Can i flash over the stock rom?
Marconicosax said:
How I can flash without wipe? Can i flash over the stock rom?
Click to expand...
Click to collapse
Yes. This is a stock rom only. You can flash it on oreo beta 6 or stock nougat.
Ruturaj Kadam said:
Yes. This is a stock rom only. You can flash it on oreo beta 6 or stock nougat.
Click to expand...
Click to collapse
are you sure I do not lose data and apps?
Tx
Marconicosax said:
are you sure I do not lose data and apps?
Tx
Click to expand...
Click to collapse
Yes you will not lose data if you're updating from stock.
Did this update work with G950FXXU1AQK7 or it is necessary the G950FXXU1AQL5
Thanks in advance
VITMAD said:
Did this update work with G950FXXU1AQK7 or it is necessary the G950FXXU1AQL5
Thanks in advance
Click to expand...
Click to collapse
It works on AQK7 too.
Ruturaj Kadam said:
It works on AQK7 too.
Click to expand...
Click to collapse
Soon I'll give you some news, about if works or not
Thanks in advance
Hi
Thank you for share
What CSC firmware please ?
Hello guys... what about this "CRAP" crappy news? retired from deployment waiting for a new version..
have you experienced any issue?
or is just a move to move people attention to the new S9?
coyote950 said:
Hi
Thank you for share
What CSC firmware please ?
Click to expand...
Click to collapse
INS
ergal said:
Hello guys... what about this "CRAP" crappy news? retired from deployment waiting for a new version..
have you experienced any issue?
or is just a move to move people attention to the new S9?
Click to expand...
Click to collapse
No issues. Its stock Oreo firmware.
Ruturaj Kadam said:
No issues. Its stock Oreo firmware.
Click to expand...
Click to collapse
https://www.sammobile.com/news/sams...roid-8-0-release-new-version-being-developed/
EDIT: reading users comments it seems the issue is related to OTA update process failing.
ergal said:
https://www.sammobile.com/news/sams...roid-8-0-release-new-version-being-developed/
EDIT: reading users comments it seems the issue is related to OTA update process failing.
Click to expand...
Click to collapse
Yes I know about it. But I faced no issues.
Edit : Its ok as this one is a Odin flashable.
Ruturaj Kadam said:
Yes. This is a stock rom only. You can flash it on oreo beta 6 or stock nougat.
Click to expand...
Click to collapse
I'm using stock nougat. it can flashable to my device ? my screenshot detail
Once flahed. Will it support OTA update in future?
Is it require root ? I'm new user..
*dual SIM Singapore starhub
Thanks in advance..
Hi, Guys.
I just installed new OREO Firmware CRB7 [PDA G950FXXU1CRB7-CSC G950FOXM1CRAP-BL G950FXXU1CRB7 (DBT) - Changelist 12993656] and I did exactly the same steps as in the previous CRAP Firmware – HERE ( https://forum.xda-developers.com/galaxy-s8/development/oreoodin-official-firmware-galaxy-s8-t3748669 ).
This time I’ve used a new ODIN, v3.12.10.1, and I didn’t absolutely NOTHING different from what I had already done in the previous flash, so there is nothing more to add to what was said earlier, just follow what it has been said, as simple as that.
I'm so sorry no longer available to answer user questions, but understand that I'm just reporting something I just did, without any kind of problems.
Other questions that could be put beyond all that has been said, I could only answer with certainty if I had experienced this same doubt, that is, I would have to reproduce the problem to give the answer, understand?
Has anyone asked if through an update via update.zip could install Recovery TWRP or Root ... I would say yes, but I can not be sure of this because I never did ... it's a matter of trying!
So I leave here the LINK of new firmware, to be installed via ODIN, just like any other firmware to be installed this way ... there are no secrets.
I also leave LINK for Magisk v16.0 (1600), Magisk Manager v5.6.1, Magisk Uninstaller 2018-02-22 and TWRP 3.2.1-0 dreamlte, for anyone who needs this software.
Good Luck to All
PDA G950FXXU1CRB7 - CSC G950FOXM1CRAP - BL G950FXXU1CRB7 (DBT)
https://www.androidfilehost.com/?fid=746010030569955941
Magisk v16.0(1600)+MagiskManager v5.6.1+MagiskUninstaller_2018-02-22
https://www.androidfilehost.com/?fid=962187416754462528
Odin3 v3.12.10.1
https://www.androidfilehost.com/?fid=673956719939821692
TWRP 3.2.1-0 dreamlte
https://www.androidfilehost.com/?fid=746010030569953853
Hi. I have not yet installed any custom ROM, just installed TWRP and Magisk. Later I'm going to test some ROMs, but so far everything is perfect, no problem.
I already had a custom ROM before flashing the new firmware, so maybe I had no problems installing the TWRP or Root
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
it does not let me flash the twrp, it tells me that only official binaries
juan_itoo said:
it does not let me flash the twrp, it tells me that only official binaries
Click to expand...
Click to collapse
Because phone is on Prenormal Status, no? If so, you may attend 7 days with phone ON, without restart them (I think [emoji848]).
S8 [email protected] v7.3.4(109)
limafranco said:
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
Click to expand...
Click to collapse
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
This
juan_itoo said:
This
Click to expand...
Click to collapse
[emoji21]Just like I said
S8 [email protected] v7.3.4(109)
trocopassu said:
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
Click to expand...
Click to collapse
Yes, it works.
I just flashed. Its the same FW for both versions (Exynos)
How u r knox 0x0 after flashing twrp and magisk @trocopassu
mayank233 said:
How u r knox 0x0 after flashing twrp and magisk @trocopassu
Click to expand...
Click to collapse
Custom Kernel
S8 [email protected] v7.3.4(109)
Samsung just released a new Odin version that fixes the problem of the new compression files.
Now the flash is done the old way
PS: Odin version 3.13.1
Please, a mirror of the ROM
alejobog said:
Please, a mirror of the ROM
Click to expand...
Click to collapse
Hi.
File to download is not ROM but the Official Stock Firmware for the S8 G950F.
Now, new ODIN with has .lz4 file support, so you can download Official Stock Firmware directly from SamMobile and flash this on your S8 G950F (or other) with the new ODIN.
I leave here LINKs for SamMobile G950F Firmware and ODIN with support for .lz4 files
ODIN (.lz4 support) - https://www.androidfilehost.com/?fid=746010030569958654
SamMobile G950F (firmware) - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
ppelao3k said:
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
Click to expand...
Click to collapse
Yes, same problem.
if I have this message in download mode --- 'Only official released binaries are allowed to be flashed' after having installed official CRB7 --- can I flash official AQL5 ROM to go back to version 7 and thus be able to install TWRP ??
Please advise before doing so, as I understand in the state that is today, I must wait a week to install something in download mode ... is it correct?
If I make a mistake without asking, I could be without a phone for a week and I would have to commit suicide ... hahaha
Thank you.
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
VITMAD said:
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
Click to expand...
Click to collapse
Thanks, matte. Congratulations also to you for your decision.
how could you manage to flash without giving instruction about OEM unlock? i dont have option in dev mode for OEM unlock.