Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy
Related
After trying to install ICS on my folio 100 using Rom manager, the update to ICS failed. Now the Folio 100 starts normally, but it doesn’t react on the buttons (power + vol +, 3x power vol 1). It just starts normally and after that I can use everything the normal way. Except when I change language from English into Nederlands, it’s not saved and after a restart of the system it’s back in English again, including the time zone which will be back to GMT +00.00 which is very annoying. The only way to get rid of this is to reinstall Android 3. By the way, factory reset doesn’t reset anything. It just restarts the Folio.
Getting into recovery from the menu or from Rom manager won’t do the trick either. The only thing I can use is ABD. But the command “flash_image recovery recovery.img” gives an error: “Error scanning partitions: No such file or directory”. And the file is in the system-directory. So this is a dead end for me too. I searched the forum and the internet, tried several possibilities, but now I’m stuck. I’ve considered opening the Folio and to start it without NAND connected, but I haven’t tried this, because I still hope for a software solution. What will happen when I manually delete of format the internal SD? Is there anyone who can help me to get my folio into recovery one way or another? Data is lost already, so that’s no problem anymore in this case.
Fastboot command is: fastboot flash recovery recovery.x.y.z.img ... not flash_image recovery.img (name of the recovery ofc)
Ics ? CM9? If so just read the tutorial on the topic related its simple as hell...
Also best way to start an new: fast boot erase Linux/recovery/system/cache/userdata one after another then fastboot reboot (remove USB before it reboot) check the folio say magic mismatch error then reboot pressing long on power(6sec) then the recovery command.
Sent from my folio100 using XDA Premium HD app
Thanks but...
ReiverBlade said:
Fastboot command is: fastboot flash recovery recovery.x.y.z.img ... not flash_image recovery.img (name of the recovery ofc)
Ics ? CM9? If so just read the tutorial on the topic related its simple as hell...
Also best way to start an new: fast boot erase Linux/recovery/system/cache/userdata one after another then fastboot reboot (remove USB before it reboot) check the folio say magic mismatch error then reboot pressing long on power(6sec) then the recovery command.
Sent from my folio100 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, but this isn't the solution. The main problem is that I can't get my Folio into fastboot/recovery mode anymore. After that updating is simple. Done it several times before. Do you have a suggestion how I can get it into fastboot/recovery mode. ADB wont work either.
Regards Erik
Weird... hum im not home but i will check that( full keyboard is easier to answer xD)
Sent from my GT-I9000 using XDA
ErikSnippe said:
Thanks, but this isn't the solution. The main problem is that I can't get my Folio into fastboot/recovery mode anymore. After that updating is simple. Done it several times before. Do you have a suggestion how I can get it into fastboot/recovery mode. ADB wont work either.
Regards Erik
Click to expand...
Click to collapse
Remove the sdcard!
Remove SD Card
stefannsv said:
Remove the sdcard!
Click to expand...
Click to collapse
I removed the external SD-card (to the right of the orange light). But that doesn't help. How can I remove the internal SD-card? I removed the back and the battery but I do not find a sd-card. Unmounting the internal SD-card doesn't do the trick either.
did You come in the recovery menu??
I think you flashed the ics withe the wrong recovery...
flash the old rom aigan (copy the update.zip in the sdcard and update the folio via recovery menu)
when that works, try aigan with fastboot to flash first boot, then recovery (but the right version!!)
stefannsv said:
did You come in the recovery menu??
I think you flashed the ics withe the wrong recovery...
flash the old rom aigan (copy the update.zip in the sdcard and update the folio via recovery menu)
when that works, try aigan with fastboot to flash first boot, then recovery (but the right version!!)
Click to expand...
Click to collapse
I think you're absolutely rigth about flashing the wrong recovery. Problem is that I can't come into a recovery menu (power + vol up). Fastboot won't work either (3xpower + vol up). I've used both before, so the configuration on my pc is right. Now al I have to do is boot into recovery or into fastboot. That's my problem, flashing with the working Honeycomb-version is no problem at al when I get into the recovery menu. Do you no what happens if I delete the complete /system/-directory on my folio? Is that an option to force the tab into recovery?
...and how want you delete the complete sys? do you mean with root explorer in rw-option?? thats very dangerous...can't you flash with rom manager?
Rom Manager
stefannsv said:
...and how want you delete the complete sys? do you mean with root explorer in rw-option?? thats very dangerous...can't you flash with rom manager?
Click to expand...
Click to collapse
I can access the internal sd-card using ADB. This way I should be able to delete/move/copy files. After puting the system-partionion in RW-state. In Adb shell the command "flash_image recover recover.img" gives an error "erros scanning partitions: No such file or directory". The image files exists! So I'm stuck there too.
I tried to use rommanager. It work once when i was installing ICS. After this it won't boot into recovery. When I use "Flash clockworkmod recovery" in Rommanager v5.0.0.6 i only get the following phone models: Advent Vega, Elocity A7, LG/T-mobile G2X, LGE Optimus 2x, Motorolo XOOM and Viewsonic Gtablet (smb_a1002) - bootloader 1.1. I tried all the phone models, but all they do is reboot the tablet. No choice will boot into recovery. Also tried clockworkmod recovery 2.5.1.4 but also no succes.
I do not know how to install clockworkmod 3.0.0.5 for Folio. I only can find an option to install it using recovery menu or fastboot. And both won't work on my tablet.
and you have put the recover.img file in the fastboot directory?
stefannsv said:
and you have put the recover.img file in the fastboot directory?
Click to expand...
Click to collapse
Where can i find the fastboot directory?
Here I've ad complain the Problem:
http://forum.xda-developers.com/showpost.php?p=23715985&postcount=467
the fastbootdirectory is in android-sdk-windows\platform-tools
There is the fastboot.exe too.
Put the two files in that directory, connect yout folio via usb in fastboot modus with your pc or laptop, make the described commands at windows shell.
stefannsv said:
Here I've ad complain the Problem:
http://forum.xda-developers.com/showpost.php?p=23715985&postcount=467
the fastbootdirectory is in android-sdk-windows\platform-tools
There is the fastboot.exe too.
Put the two files in that directory, connect yout folio via usb in fastboot modus with your pc or laptop, make the described commands at windows shell.
Click to expand...
Click to collapse
Still the main problem is that I can't put my folio into fastbootmode via usb.
so far only 2 things prevent my folio to go into fastboot: power cord and/or mini usb unplugged.
also you talk about removing internal SD but you know what they reffere as internal SD is : a chip soldered on the motherboard?Right?
one more thing lets make it clear: fasboot directory isnt fixed, for the sake of accessibility you can put it like me C:\tools_X
also renaming recovery5.0.0.4.img (the one from nopy) into recoveryA.img (i wonder if your error come because you write the wrong commande or if its because of recover.img instead of the right name for the file.)
last option before saying: you F***ed up your tablet if nothing mentioned above works
also side note: every answer from you after a recommendation from a user : contain a new error \\\ important your problem come from : not being able to go into fastboot mode or not being able to flash the recovery via fastboot (either due to : you putting the recovery img not in the right directory or input the wrong command) its important since 1st one is prolly f.u.b.a.r and the second one is recoverable by reading and doing step by step whats explain *exactely what is explain*
the only right command is : "fastboot flash recovery *name of the recovery*.img" and not Flash_recover recover.img as you write it 2 time now
Sent from my folio100 using XDA Premium HD app
ReiverBlade said:
so far only 2 things prevent my folio to go into fastboot: power cord and/or mini usb unplugged.
also you talk about removing internal SD but you know what they reffere as internal SD is : a chip soldered on the motherboard?Right?
one more thing lets make it clear: fasboot directory isnt fixed, for the sake of accessibility you can put it like me C:\tools_X
also renaming recovery5.0.0.4.img (the one from nopy) into recoveryA.img (i wonder if your error come because you write the wrong commande or if its because of recover.img instead of the right name for the file.)
last option before saying: you F***ed up your tablet if nothing mentioned above works
also side note: every answer from you after a recommendation from a user : contain a new error \\\ important your problem come from : not being able to go into fastboot mode or not being able to flash the recovery via fastboot (either due to : you putting the recovery img not in the right directory or input the wrong command) its important since 1st one is prolly f.u.b.a.r and the second one is recoverable by reading and doing step by step whats explain *exactely what is explain*
the only right command is : "fastboot flash recovery *name of the recovery*.img" and not Flash_recover recover.img as you write it 2 time now
Sent from my folio100 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for your help,
the fastboot command fastboot flash recovery......... doesn't work. My pc keeps waiting for the device. Which is to be expected while i can't boot my folio into fastboot-mode. The command i used before is in adb shell.
Can you tell me where to put recovery.img exactly on my folio? And what i should do after i,ve put it there. I can use a root-explorer on my folio and i can use adb push ...... to move or copy files. Also mounting system in rw-mode is no problem anymore. My folio is rooted and i can use it as root or su in adb-shell.
ErikSnippe said:
Thanks for your help,
the fastboot command fastboot flash recovery......... doesn't work. My pc keeps waiting for the device. Which is to be expected while i can't boot my folio into fastboot-mode. The command i used before is in adb shell.
Can you tell me where to put recovery.img exactly on my folio? And what i should do after i,ve put it there. I can use a root-explorer on my folio and i can use adb push ...... to move or copy files. Also mounting system in rw-mode is no problem anymore. My folio is rooted and i can use it as root or su in adb-shell.
Click to expand...
Click to collapse
Don't put the recovery.img into the folio! Copy it to your pc. In the folder where the fastboot.exe is. Then start your folio an go in the fastboot modus (power and three times volume up)
Connect your folio via mini-usb with your pc and open a windows shell(cmd).
Now type
fastboot erase recovery
Fastboot flash recovery nameoftherecoveryfile
stefannsv said:
Don't put the recovery.img into the folio! Copy it to your pc. In the folder where the fastboot.exe is. Then start your folio an go in the fastboot modus (power and three times volume up)
Connect your folio via mini-usb with your pc and open a windows shell(cmd).
Now type
fastboot erase recovery
Fastboot flash recovery nameoftherecoveryfile
Click to expand...
Click to collapse
I can't get into fastboot-mode with my folio!!!!!!! That's the whole problem. The pc stays waiting for the device!
ErikSnippe said:
I can't get into fastboot-mode with my folio!!!!!!! That's the whole problem. The pc stays waiting for the device!
Click to expand...
Click to collapse
install PDANet on your pc
ErikSnippe said:
I can't get into fastboot-mode with my folio!!!!!!! That's the whole problem. The pc stays waiting for the device!
Click to expand...
Click to collapse
Is the problem the fastboot modus at the folio or the connection to your pc?
I'm sorry that probably many have asked the same quesiton, but I'm desperate. The case is I followed the guide on rootyourmobile dot com how-to-unlock-bootloader-install-twrp-and-root-huawei-honor-7 to unlock, install twrp and root. All went good until installing SuperSu through TWRP, where the installation process got cancelled and I'm now stuck at honor-logo. I can still access twrp(it's in chinese though), by holding volum up + power, but I dont manage to access fastboot mode.
I realize this is a way to go. I guess my problem is not getting into fastboot, I also tried all options under Reboot in TWRP. Should I let the battery run out? Any help is much appreciated. Hope my phone is not total garbage...
DigiGoon said:
Okay follow these step, if you don't understand any step ask again. But follow these:
Download the UPDATE.APP of the Build number you were on before.
Extract system.img, boot.img, recovery.img, cust.img from that UPDATE.APP
Flash all these files via bootloader mode, to boot into bootloader mode, once a loop is over and you see blank screen on your phone, quickly press Vol DOWN button and while pressing it connect your phone to a PC. If this doesn't work and you get into recovery, then in recovery go to option Reboot, in that select Bootloader.
Once in bootloader mode, flash these files by firing these commands from a CMD, make sure files are situated in the same location where you open up the CMD.
Code:
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash boot boot.img
Now after your phone boots up normally, put the same UPDATE.APP from which these files were extracted in dload folder of your external SDcard.
Now switch off your phone and press all the three buttons(Vol UP + Vol DOWN + Power) simultaneously.
Flashing process will start.
Hope this helps.
Click to expand...
Click to collapse
mosoo said:
I'm sorry that probably many have asked the same quesiton, but I'm desperate. The case is I followed the guide on rootyourmobile dot com how-to-unlock-bootloader-install-twrp-and-root-huawei-honor-7 to unlock, install twrp and root. All went good until installing SuperSu through TWRP, where the installation process got cancelled and I'm now stuck at honor-logo. I can still access twrp(it's in chinese though), by holding volum up + power, but I dont manage to access fastboot mode.
I realize this is a way to go. I guess my problem is not getting into fastboot, I also tried all options under Reboot in TWRP. Should I let the battery run out? Any help is much appreciated. Hope my phone is not total garbage...
Click to expand...
Click to collapse
No need to open a separate threat. Check your post.
Why are you quoting my post and starting a new thread with it?
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
Solutions:
1. Boot into recovery (Power + VolUp) and restore last backup (I really do hope you have a backup). It should be enough to restore just boot image. Mine ended in eRecovery few days ago after messing with Magisk and I've successfully recovered my device from there
2. Download original firmware, extract it, boot into fastboot (obv., try fixing it first, but you've flashed TWRP so it must work for other stuff, too) and just reflash original boot image
3. Download original firmware, extract it, boot into fastboot and reflash original recovery, then try eRecovery (this will probably wipe all your data, though)
There are tons of manuals how to extract Huawei/Honor firmware images (even a nice little program to do it for you), so I'd suggest searching around for that SW instead of asking how.
Kingofiron257 said:
Hello guys, I am new here to XDA Developers, so here's my take on my phone's problem..
Long story short, I wanted to root my phone so I could enable the OTG option for my phone cuz I tend to get my storage filled up and use a USB to transfer files. So, I did root my phone, got its bootloader unlocked and successfully done the operation. I used the kiwi_twrp_3-21_recovery.img via ADB and Fastboot tool for this.
But when I used ADB and Fastboot to flash the boot-kiwi-marshmallow-otg,img file and restart it afterwards, the phone will go straight to eRecovery mode. Here I cannot download the recovery it wants because it always show download info fail of some sort and that I cannot debug the phone either. I do can get it to Fastboot mode but my computer won't detect it.. So my phone is basically a stone now. What should I do now? It is my first time so I don't wanna get busted, any help will be appreciated! Thanks!
For reference: I was using this this thread for OTG enabling feature:
https://forum.xda-developers.com/honor-5x/how-to/tutorial-enable-otg-honor-5x-t3322274
And for rooting process, I just watched this video:
https://www.youtube.com/watch?v=Y-2SWbInT6U
Click to expand...
Click to collapse
what recovery do you have now?? can you access twrp? or you are left with emui recovery??
if you have emui recovery, just perform a dload flash
Looks like he solved it.
adriansticoid said:
Looks like he solved it.
Click to expand...
Click to collapse
We need his solution , the one he tried
gopinaidu77 said:
We need his solution , the one he tried
Click to expand...
Click to collapse
Let's wait for his post.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
Let's wait for his post.
Click to expand...
Click to collapse
Its been long he replied. Omg ,what is going ?
Stop. Spamming. The. Thread. For. Points.
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
SubwayChamp said:
I dont´know what you tried to do before to get this status or if you have an unlocked bootloader to perform some operation in fastboot mode. If you are in stock rom you can try enter to recovery and use MiAssistant feature is a kind of adb sideload in-built that you can use to reinstall again the rom onto your device. Here you will find some guide lines about this behind the concept http://www.xiaomitool.com/adb
Click to expand...
Click to collapse
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Jackevolution said:
So, i have news, i can go on recovery mode (recovery i have is called "Team Win Recovery Project 3.2.1.0"), but in order to make write action (now i can only read) request me a password, obviously neither 1 of my pass (sim pin/screen unlock) work.
Click to expand...
Click to collapse
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Jackevolution said:
You right sorry. I have Bootloader unlocked. My brick come becose of me trying to root the phone with "1clickrooter" for redmi5 plus. When phone rebooted on recovery he ask me for a password. No pin works on this pass requesto so i try to wipe cash, phone automatically reboot and stuck in logo screen. Cannot turn of or go to recovery, only action i can make is to go on fastboot mode.
Click to expand...
Click to collapse
SubwayChamp said:
If you can reboot now to recovery twrp then just cancel when it prompts for a password and you have to format data in order to can reboot to system again
Click to expand...
Click to collapse
Already done, now semms to be stuck on the same loading screen, baibe he installing apps? It taking sooo long...
i think this isn't working. It's just 20 minute that phone is stuck on "Mi" screen...
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Jackevolution said:
Nope, definetly not worked. There is a way to put filesin the phone from recovery?
Click to expand...
Click to collapse
Yes, you can reflash again the rom, put the rom zip in your adb folder and short the name as you can, and flash it using adb sideload, to do this tap on "advanced option" and then "adb sideload" in recovery menu and in adb terminal in your pc type adb sideload nameofrom.zip where nameofrom is te name of the rom, don´t forget the extension .zip as I wrote. TWRP will load the zip and flash it again and then you can flash Magisk to root device.
If you can´t see storage of device in your pc is cause it´s encrypted but you can perform adb sideload anyway
Jackevolution said:
Hi guys, my redmi 5 plus is stuck on logo loading screen and i can only go for fastboot. Cannot neither turn off phone.
I tried with Mi Flash tool but program fail with "Can not find flash_all.bat". I tried different version of roms and Mitool, but still have this error. How can i repair my device? Thnak you all for the future responsed
Ps: sorry for my really bad english
Click to expand...
Click to collapse
Look at the error you got every time "Can not find flash_all.bat" its mean that you are selecting invalid path, okay so here is correct method to flash via fast-boot method:
Download the latest fast boot rom zip one option is http://bigota.d.miui.com/V9.5.12.0....FA_20180525.0000.00_7.1_global_343bc5aaef.tgz
Unzip .tgz using winrar and the zip will be extracted in folder named as vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 inside this folder there will be another folder named same.
Open Mi Flash tool and click to select direct to folder vince_global_images_V9.5.12.0.NEGMIFA_20180525.0000.00_7 open the folder and then open the other folder click Ok (don't open the the images folder)
Connect your redmi 5 plus in fast boot mode and click refresh, then choose clean all and click Flash