[Tutorial] Root after November security update (A5 2017). - Samsung Galaxy A3, A5, A7 (2017) Guides, News, & D

Edit: You can follow the solution of @ashyx through the following link to fix the problem can not flash twrp or boot via Odin. I think it will work
Link: https://forum.xda-developers.com/sa...g-sm-a520f-2017-kernel-source-t3557622/page31
Hello everyone,
After I updated the latest firmware, I was unable to flash BOOT or TWRP via Odin. It just returned the result that ONLY OFFICIAL BINARIES ARE ALLOWED TO BE FLASHED (RECOVERY / BOOT). I think samsung locked the bootloader. Today, I have found a way to fix this problem because knox 0x1 but can not root is not pleasant at all!
I only tested on my A520F, not tested on any other device. I am not responsible for any errors on your device.
1. Go to http://updato.com and download 2 firmware updates with your CSC.
+ Latest firmware 7.0 (November security).
+ Latest firmware 6.0 (MM).
2. Backup your important data
3. Reboot to download mode.
4. Add AP, CP, CSC of firmware 7.0 (November security) to the corresponding slot in Odin.
5. Add BL file of lastest firmware 6.0 (MM) to BL slot in Odin.
6. Start and wait a moment.
7. Setup and after that, you can flash TWRP or BOOT via Odin without bootloader errors.
Enjoy!
Sorry for my english...

Original info from this thread maybe?
https://forum.xda-developers.com/sa...g-sm-a520f-2017-kernel-source-t3557622/page31
.

Hi ahyx, i searched google about not being able to flash twrp or boot after security update in November and know the information is that maybe samsung has locked the bootloader. So, I just tried replacing the BL file of the old firmware that I saved on my laptop and it worked. I do not notice that you have found the solution first. Sorry for it as an act of plagiarism. I will link to your topic as a good faith (sorry for my english)

Oh man, thank you very much !! helped me here too! I had my a5 17 with this 'softbrick' but thank God I was able to install twrp, and so doing root haha I just can not downgrade to the MM.

this one are 100% work?
i need to download lates MM version and lates Nougat version? then i flash only BL of MM and CP,CSC and AP of nougat version? tia

kobejor said:
i need to download lates MM version and lates Nougat version? then i flash only BL of MM and CP,CSC and AP of nougat version? tia
Click to expand...
Click to collapse
Vou need to download the latest Nougat 7.0 firmware (A520FXXU2BQK4) and fw plus MarshMallow 6.0.1 (A520FXXU2AQG4).
I, as a Brazilian, downloaded the fw of Brazil.
And then in AP, CP and CSC you put the respective AP, CP and CSC files of the Nougat rom
and in BL the Marshmallow rom file.
It works, man!
At first I had some problems, the smart was out of system because before finishing the process I got some errors (old usb port, bad contact, etc.). Try to keep all the smart USB drivers on your PC, turn on the debug and also the OEM mode and restore your a5. Today I have been able to downgrade and I am using the stock rom 6.0.1

guys can someone please upload MM boot loader so we don't have to download the ROM completely (approx 2.1 GO )
THANKS GUYS

When i try to flash it says: SW REV CHECK FAIL DEVICE 2 BINARY 1

T-Rex said:
guys can someone please upload MM boot loader so we don't have to download the ROM completely (approx 2.1 GO )
THANKS GUYS
Click to expand...
Click to collapse
http://www.mediafire.com/file/8173e...911830_QB14224310_REV00_user_low_ship.tar.md5
BL MM (6.0.1) - From ZTO Brazil

caiquess95 said:
Vou need to download the latest Nougat 7.0 firmware (A520FXXU2BQK4) and fw plus MarshMallow 6.0.1 (A520FXXU2AQG4).
I, as a Brazilian, downloaded the fw of Brazil.
And then in AP, CP and CSC you put the respective AP, CP and CSC files of the Nougat rom
and in BL the Marshmallow rom file.
It works, man!
At first I had some problems, the smart was out of system because before finishing the process I got some errors (old usb port, bad contact, etc.). Try to keep all the smart USB drivers on your PC, turn on the debug and also the OEM mode and restore your a5. Today I have been able to downgrade and I am using the stock rom 6.0.1
Click to expand...
Click to collapse
I'm also Brazilian, and it worked for me! Thank you!

It turned out people were stuck with my A7 2017 using the rom of India nougat, I could not install nor the recovery much less to do the root, with your help here I got I'm from Brazil, I just installed via odin the file BL zto android 6, I entered the download mode and installed recovery and did the root, now only joy.

Download ROM quickly in Android Duniya site.

same problem hahaha, now it's root after the December patch

thangluong said:
Edit: You can follow the solution of @ashyx through the following link to fix the problem can not flash twrp or boot via Odin. I think it will work
Link: https://forum.xda-developers.com/sa...g-sm-a520f-2017-kernel-source-t3557622/page31
Hello everyone,
After I updated the latest firmware, I was unable to flash BOOT or TWRP via Odin. It just returned the result that ONLY OFFICIAL BINARIES ARE ALLOWED TO BE FLASHED (RECOVERY / BOOT). I think samsung locked the bootloader. Today, I have found a way to fix this problem because knox 0x1 but can not root is not pleasant at all!
I only tested on my A520F, not tested on any other device. I am not responsible for any errors on your device.
1. Go to http://updato.com and download 2 firmware updates with your CSC.
+ Latest firmware 7.0 (November security).
+ Latest firmware 6.0 (MM).
2. Backup your important data
3. Reboot to download mode.
4. Add AP, CP, CSC of firmware 7.0 (November security) to the corresponding slot in Odin.
5. Add BL file of lastest firmware 6.0 (MM) to BL slot in Odin.
6. Start and wait a moment.
7. Setup and after that, you can flash TWRP or BOOT via Odin without bootloader errors.
Enjoy!
Sorry for my english...
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------
I try this with the Android 6.0.1 BL but I recived the next error: SV REV. CHECK FAIL. DEVICE: 3. BINARY: 1
please help me.. my Phone is A5 2017 (SM-A520F)

RubenDGuerreroG said:
--------------------------------------------------------------------------------------------------------------------------------------
I try this with the Android 6.0.1 BL but I recived the next error: SV REV. CHECK FAIL. DEVICE: 3. BINARY: 1
please help me.. my Phone is A5 2017 (SM-A520F)
Click to expand...
Click to collapse
OK two things.
1. You can't have downloaded the boot image specified as it's a rev. 2 binary not 1.
2. Your device has been updated to rev. 3, so you're probably out of luck for downgrading.

ashyx said:
OK two things.
1. You can't have downloaded the boot image specified as it's a rev. 2 binary not 1.
2. Your device has been updated to rev. 3, so you're probably out of luck for downgrading.
Click to expand...
Click to collapse
Same problem here...
I can't root anymore

ashyx said:
OK two things.
1. You can't have downloaded the boot image specified as it's a rev. 2 binary not 1.
2. Your device has been updated to rev. 3, so you're probably out of luck for downgrading.
Click to expand...
Click to collapse
I just bought the A520F/DS (Malaysia) which still has MM 6.0.1. Can I use the procedure - Flash latest Nougat (Rev. 3 or later) in AP, CP, CSC) leaving BL blank - then do root? (Would I be correct to assume the bootloader will be unaltered, i.e. still be MM 6.0.1?) Thanks.

Just dropping by to leave some info, I successfully flashed TWRP on my single sim A520F with December bootloader updated to january after porting 7.1.1, and another one, same single sim, with January bootloader. Although, i have a friend with Duos that can't flash anything too since november patch.
So i think this issue is more like a bug, i don't see why samsung would lock only duos devices and not single too. N8 issue is actually the dissappearing oem unlock toggle, csc related. Some countries have it, some countries don't. But in our situation, this is more like a frp lock stuck on, no matter why oem toggle says. I surely hope i am right and future updates will bring duos users the freedom back.
Regards
Sent from my SM-A730F using Tapatalk

Has anyone tried updating to January Security Patch using the same trick? Say, Odin combination of rev 2 BL (from MM) + rev 4 January nougat update (AP+CP+CSC) and had their phones rooted after flashing?
Update: Done using this trick and had my device rooted successfully.

@ashyx
Hi
Is it possible to skip updating bootloader when flashing, to avoid rooting problems?
e.g. Can we update to android O with an unlocked bootloader of Android N or MM?

Related

How to downgrade from Android 6.0.1 to 5.1.1

Hello
I flashed the latest firmware available for my S6 edge (SM-G925F) : G925FXXU3DPDP (XEF).
I've never used Android 5.1.1 on my phone and I asks to you if downgrade is possible at this point (latest BL I think) and if yes, how ?
Thanks you for your further replies
Bye.
I Think Once u Flashed The latest Firmware U can't Go back
Because Of bootloader
Bt U can try Download Android LP And boot loader And put Ur phone in Download Mode Flash with odin
i updated on 6.02...
didn´t like it...
flashed back to 5.1.1 stock without problems (odin)
Hello poci,
You were running with which firmware ?
It's easy to go back to lollipop?
I'm reading some comments off people wich say No, ando some less who say Yes.
i made an OTA update from 5.1.1 to 6.0.2... but i didn´t like the battery drain on 6.0.2......(or 6.0.1 i don´t know anymore)
after clean install of 6.0.2....there was no change at all...
then i went back to 5.1.1 by flashing a stock 5.1.1. firmware with odin...no trouble or anything else...
If flash fails, is my device will be hardbricked ???
if you have the right firmware...i would say "no"
so why should it fail?
i used this firmware for my o2 edge
G925FXXU3QOLD_G925FTEF3QOL1_G925FXXU3QOJB_HOME.tar
Beceause newest bootloaders blocks downgrade, you was in which firmware on Marshmallow ?
don´t know exactly...60.1 then
when 6.0.2 blocks downgrade...

ROM Ereo 8.0 Beta

Rom Oreo with the s7 all version Snap...! Update from Nougat 7.0 AT&T
Note : sm-g930p use bootloader V4. (ex: G930PVPU5BQJ3 ) is lv5
Rom 7.0 AT&T https://drive.google.com/open?id=1vzeUNaH8vTD6oysELVh96UNpgD3B948l (Flash ODIN)
Rom 8.0 Beta 4
https://forum.xda-developers.com/att-galaxy-s7/how-to/oreo-otas-t3749902
or
https://drive.google.com/open?id=1Y6LESKbJ8tYinCFIzJGFiI7OtH1vyfST
After flash ODIN 7.0 AT&T , copy Rom 8.0 beat 1 to sdcard and go to Recovery ( Power + Volume Up + Home) next "Apply update from SD card" chose Rom 8.0 , wait until finish...
Final , Once upgraded successfully, continue to recovery and wipe the cache
GOOD LUCKY...
The Source :https://forum.xda-developers.com/att-galaxy-s7/how-to/oreo-otas-t3749902
Has anyone tried this on Sprint U rom?
£itt€r PoY said:
Rom Oreo with the s7 all version Snap...! Update from Nougat 7.0 AT&T
Rom 7.0 AT&T https://drive.google.com/uc?id=1Uh5mNql0kRq6a1SBtifZ7X1mDMFksSUL&export=download (Flash ODIN)
Rom 8.0 Beta
https://forum.xda-developers.com/att-galaxy-s7/how-to/oreo-otas-t3749902
After flash ODIN 7.0 AT&T , copy Rom 8.0 to sdcard and go to Recovery ( Power + Volume Up + Home) next "Apply update from SD card" chose Rom 8.0 , wait until finish...
Final , Once upgraded successfully, continue to recovery and wipe the cache
GOOD LUCKY...
The Source :https://forum.xda-developers.com/att-galaxy-s7/how-to/oreo-otas-t3749902
Click to expand...
Click to collapse
Not positive, but I'm pretty sure if you have a newer sprint firmware (around Nov), you won't be able to do this due to the updated binary. Can someone confirm? Otherwise, a bunch of people will flash only receive the binary fuse error.
lvpre said:
Not positive, but I'm pretty sure if you have a newer sprint firmware (around Nov), you won't be able to do this due to the updated binary. Can someone confirm? Otherwise, a bunch of people will flash only receive the binary fuse error.
Click to expand...
Click to collapse
It's because of the bootloader version on the newer Sprint builds. The builds from G930PVPU5BQJ3 onward use bootloader V5, while all models (including the universal ones) use bootloader V4, which is why there's an error if you try to flash a firmware with an older older bootloader version over the newer Sprint builds, as Samsung doesn't allow for downgrading of the bootloader.
Before im use rom U lv4. After ,odin and update...^^
Link Dead
Rom 7.0 AT&T https://drive.google.com/uc?id=1Uh5m...xport=download (Flash ODIN)
raziel6714 said:
Link Dead
Rom 7.0 AT&T https://drive.google.com/uc?id=1Uh5m...xport=download (Flash ODIN)
Click to expand...
Click to collapse
Fixed

help me unbrick Galaxy AMP 2 JA120AZ

I removed frp and after restarting I got to recovery screen with a message stating "DM-VERITY verification Failed: , googling around I figured I needed to reflash the rom (ODIN), thing is I already tried many times and i always get a FAIL while flashing the SYSTEM part, I've tried downloading from different sources, so maybe I am downloading the wrong firmware, is this possible if boot and rec are flashing fine?, so i went to search and I always ended p with same firmware version.
then I found some others:
USA (Anritsu) AIO Official Frimware SM-J120AZ J120AZTUS5ARA1 Android 6.0.1 Marshmallow 05-Feb-18 Download
USA (Anritsu) AIO Official Frimware SM-J120AZ J120AZTUU3AQH2 Android 6.0.1 Marshmallow 10-Sep-17 Download
USA (Anritsu) AIO Official Frimware SM-J120AZ J120AZTUS3AQE1 Android 6.0.1 Marshmallow 13-Jun-17 Download
USA (Anritsu) AIO Official Frimware SM-J120AZ J120AZTUS2AQB2 Android 6.0.1 Marshmallow 15-Mar-17 Download
USA (Anritsu) AIO Official Frimware SM-J120AZ J120AZTUU2APJ2 Android 6.0.1 Marshmallow 10-Nov-16 Download
USA (Anritsu) AIO Official Frimware SM-J120AZ J120AZTUU1APD2 Android 6.0.1 Marshmallow 29-May-16
Which one should i get, or HOW Can i Know which one i Need?
it is a cricket device but seems like all of those are cricket
model under battery says SM-j120AZ-UD
i know it had android 6.01 but then again all of those files are 6.01
under the sticker there has some numbers:
170224 which must be a date, and REV 03 to the right of the barcode.
made in vietnam if that helps at all.
Please Help.
nevermind, I got it , thank you, had wrong firmware

Stuck on Android 8! NEED HELP in selecting firmware to flash.

Recently bought a used samsung galaxy s9 plus. It is stuck on android 8. When I try to update it it says that I'm already on the latest software.
When I tried to search for firmware to flash manually I got confused because CSC is XAA which refers to unlocked version but currently installed firmware is of some carrier I guess...
Can anyone please suggest me the correct firmware which I need to flash in order to get Android 9 with one UI.
See attached screenshot for exact number firmware installed.
Flash a higher binary firmware using Odin. Make sure you use full 4 file firmware. Also remember to backup your files
WaleedAkmal said:
Recently bought a used samsung galaxy s9 plus. It is stuck on android 8. When I try to update it it says that I'm already on the latest software.
When I tried to search for firmware to flash manually I got confused because CSC is XAA which refers to unlocked version but currently installed firmware is of some carrier I guess...
Can anyone please suggest me the correct firmware which I need to flash in order to get Android 9 with one UI.
See attached screenshot for exact number firmware installed.
Click to expand...
Click to collapse
Your model is SM-G965U1
https://www.sammobile.com/samsung/g...SM-G965U1/XAA/download/G965U1UES7CSK2/308022/
Download soft using SamFirm program

Need Help with Galaxy Note 8 SM G950U

So this is the Phone i have BaseBand VersionZ: N950USQS5CRK2 Service providers are XAA/XAA/TMB Knox version is 3.1 ps on phone info it only shows one active csc code XAA its G950U SnapDragon variant now i can't receive any updates on this says its updates to latest Its on Oreo rn i wanna go to pie now ive heard flashing the official pie firmware with odin should do the trick but the thing is i dont have the OEM unclock button yet i tried the date and time way to get it fastly but it didnt work what i wanna know is do i need to have OEM unlock enabled before flashing a official firmware of pie for this phone? i just wanna upgrade it to PIE pls help.
MISTAKENLY WROTE G950U ITS N950U SORRY ITS A NOTE 8
Savitar8097651 said:
So this is the Phone i have BaseBand VersionZ: N950USQS5CRK2 Service providers are XAA/XAA/TMB Knox version is 3.1 ps on phone info it only shows one active csc code XAA its G950U SnapDragon variant now i can't receive any updates on this says its updates to latest Its on Oreo rn i wanna go to pie now ive heard flashing the official pie firmware with odin should do the trick but the thing is i dont have the OEM unclock button yet i tried the date and time way to get it fastly but it didnt work what i wanna know is do i need to have OEM unlock enabled before flashing a official firmware of pie for this phone? i just wanna upgrade it to PIE pls help.
MISTAKENLY WROTE G950U ITS N950U SORRY ITS A NOTE 8
Click to expand...
Click to collapse
You won't see the OEM toggle on the "U" varient as the bootloader can't be unlocked. You do not need this to just flash official filmware anyway.
Factory resetting the phone may fix the OTA update issue you are facing, this will wipe the phone so back up everything important. If not head to SamMobile or Updato.com to download the latest filmware and flash it with Odin.
stonedpsycho said:
You won't see the OEM toggle on the "U" varient as the bootloader can't be unlocked. You do not need this to just flash official filmware anyway.
Factory resetting the phone may fix the OTA update issue you are facing, this will wipe the phone so back up everything important. If not head to SamMobile or Updato.com to download the latest filmware and flash it with Odin.
Click to expand...
Click to collapse
hello thanks for that can u guide me specifically which firmware should i flash ive got the N950U with xaa/xaa/tmb i mentioned my baseband version above aswell sorry for the hassle im kinda new to this stuff and i dont wanna end up bricking my device
Savitar8097651 said:
hello thanks for that can u guide me specifically which firmware should i flash ive got the N950U with xaa/xaa/tmb i mentioned my baseband version above aswell sorry for the hassle im kinda new to this stuff and i dont wanna end up bricking my device
Click to expand...
Click to collapse
https://www.sammobile.com/samsung/g...SM-N950U1/XAA/download/N950U1UES8DTG2/359207/
I think this is the filmware you need (xaa).
stonedpsycho said:
https://www.sammobile.com/samsung/g...SM-N950U1/XAA/download/N950U1UES8DTG2/359207/
I think this is the filmware you need (xaa).
Click to expand...
Click to collapse
he yea thanks ill try ur firmware aswell i tried flashing this one N950USQU5DSD3 firmware and on odin after setup connection it gave all threads completed 1 failed 0 completed can u help me on this?
this my phone
Bootloader Version :
N950USQS5CRK1
PDA Version :
N950USQS5CRK2
CSC Version:
N950UOYN5CRK1
Baseband Version:
N950USQS5CRK1
i took the firmware off this post https://forum.xda-developers.com/galaxy-note-8/help/official-pie-update-n950u-t3925823

Categories

Resources