Related
A new OTA version is available for those using firmware 7D-501LV100R002C100B102 (West Europe channel) downloaded from the German Huawei site http://www.huaweidevices.de/mediapad-x1-7?show=downloads
The new version is 7D-501LV100R002C100B103 and I have uploaded for you here : http://www.filedropper.com/7d-501lv100r002c100b103
EMUI is still 2.3. Modem and more than 200 applications are new.
Enjoy.
Don' t think that it's true.
1. There is no new update on German site
2. Your upload has 0 bytes file size
So something is wrong and don't spam this thread.
---------- Post added at 08:51 PM ---------- Previous post was at 08:31 PM ----------
Sorry... Now I see there is really a update. Thanks.
digitaliban said:
Don' t think that it's true.
1. There is no new update on German site
2. Your upload has 0 bytes file size
So something is wrong and don't spam this thread.
---------- Post added at 08:51 PM ---------- Previous post was at 08:31 PM ----------
Sorry... Now I see there is really a update. Thanks.
Click to expand...
Click to collapse
As I said it's a OTA update.
I don't understand your agresivity. I'm awaiting for your apologies.
As I say SORRY. But it isn't first time on XDA that some one post files that not exist. Good for use that you are not such a guy. Other question I tried it now two times and update fail every time. Do you install over rooted system?
Strange, error during update...
I'm curious, how do you obtain the file from an OTA update?
super_sonic said:
Strange, error during update...
Click to expand...
Click to collapse
Do you mean through downloaded update file or OTA?
Get it working. Installed *102 Firmware - fresh. After that the OTA update and now its working. It don't worked for me with my rooted slimed ROM.
digitaliban said:
As I say SORRY. But it isn't first time on XDA that some one post files that not exist. Good for use that you are not such a guy. Other question I tried it now two times and update fail every time. Do you install over rooted system?
Click to expand...
Click to collapse
No, my X1 is not rooted.
First, I have downloaded the OTA update but I've choosed "Install later".
Second, I went to my SD Card and I found 2 new directories, one contain 7D-501LV100R002C100B103.zip file and the other contains two files (OTA install settings). You can copy now the zip file in another place if you want to save it.
Third, after saving 7D-501LV100R002C100B103.zip file, I continued with the OTA update process.
Finally, at the end of the OTA process (after reboot), the original zip file will be deleted, but not the copy you made somewhere else.
Now, if you want to install directly (not through the OTA process) the zip file 7D-501LV100R002C100B103.zip you must rename it as update.zip and place it in \dload folder.
I read here (first post) http://forum.xda-developers.com/huawei-mediapad/general/rom-kitkat-4-4-2-emui-2-3-320-dpi-t2923307 if your phone is not a 7D-501L you may need to add a couple of files in the /dload folder to install sotck roms. I assume it's the same thing for partial updates. You will find this files inside the attached file dload.zip. You must replace the update.zip (0 bytes) included in dload.zip with the update file.
REMEMBER: This is the update for Western Europe 7D-501LV100R002C100B102 rom! This will update from 7D-501LV100R002C100B102 to 7D-501LV100R002C100B103. DO NOT USE THIS UPDATE IF YOU'RE USING OTHER ROM!
joytest said:
I'm curious, how do you obtain the file from an OTA update?
Click to expand...
Click to collapse
See post #9
7d-501l modem
Guys,
In the 7D-501LV100R002C100B103.zip you will find inside the latest modem update for 7D-501L.
So, for those people using BETA EMUI 3.0 roms on 7D-501L devices, they can update modem from 7D-503L to 7D-501L using the included update.app in \MODEM
amincom said:
Do you mean through downloaded update file or OTA?
Click to expand...
Click to collapse
Through the downloaded file... I updated modem only but not all the package...
super_sonic said:
Through the downloaded file... I updated modem only but not all the package...
Click to expand...
Click to collapse
On a 7D-501L or on a 7D-503L running B102?
On a 503l running b102. Why?
super_sonic said:
On a 503l running b102. Why?
Click to expand...
Click to collapse
Read post #9
1. Unpack dload.zip on post #9 on SD Card
2. Replace included update.zip file (0 bytes) inside dload.zip with 7D-501LV100R002C100B103.zip renamed as update.zip
3. Do not touch or delete any other file or folder inside /dload folder
Update should work now.
As stated in post #9 the solution is here: http://forum.xda-developers.com/huawei-mediapad/general/rom-kitkat-4-4-2-emui-2-3-320-dpi-t2923307
"Kindly note that international ROMs are intended for use on the international version of 503L, which is 501L, as such, to use these ROMs on 503L, you will need to dupe the system into accepting them, by using the method below:
1) once you have downloaded the desired international rom, unzip to extract the update.app file
2) download the dload.zip attachment below, unzip and put the above update.app file into the root directory of dload folder
3) copy the whole dload folder into your microsd card and flash as per normal"
is it still android 4.2.2?
enzosaba said:
is it still android 4.2.2?
Click to expand...
Click to collapse
No. It is 4.4.2!
Already updated but no updated boot logo as mentioned in changes log
Sent from my MediaPad X1 7.0
amincom said:
Already updated but no updated boot logo as mentioned in changes log
Sent from my MediaPad X1 7.0
Click to expand...
Click to collapse
Boot Logo is still there. It only changed font style from the "by android" logo on first screen. More Lollipop!
A question for 7D-503L owners using 7D-501LV100R002C100B102 firmware.
Did you get B103 OTA update? I wonder if you can get OTA updates when using firmware for other models.
For everyone
1st step, stock d80020c file, then follow the 2nd post to update to d80020y
1st link d80020c:
http://forum.xda-developers.com/showthread.php?t=2663369
Guide to update via dlpkgfile to d80020y (AFTER U HAVE DONE THE 1ST LINK, STOCK ROM, STOCK RECOVERY):
http://forum.xda-developers.com/att-g2/general/links-manually-forcing-ota-20c-to-20u-t2828874
Lollipop file link (follow the same instructions of the 2nd link to update with the file):
https://mega.nz/#!AQs2ELzS!Ua2HsAAz7g2rqrSGY2u976DNWpU7WjaqO3PMeW-7KnY
credits to @Zero4
ONLY FOR D800
No warranty is provided with these files. They are provided as-is. I take no responsibility for what AT&T/LG created and pushed out.
Tested on my Unlocked G2 D800, worked perfectly... no bugs atm
I press on authorize download and nothing happen
---------- Post added at 02:36 AM ---------- Previous post was at 02:36 AM ----------
Please tell me how to download the file.
---------- Post added at 02:58 AM ---------- Previous post was at 02:36 AM ----------
Downloading already
after i ran this, and the phone restarted and started updating, after 1% progress, i got a black screen with "Err:0x1111004"
the phone restarted into the older firmware without damage, any hints?
EDIT: i tried restoring all bloatware apps - did not work,
i also tried putting everything in place, unrooting and then starting the update - also did not work
Thanks a lot, the method worked like charm finally on official lollipop
can someone provide flashable zip for AT&T lollipop 5.0.2?
Could you please suggest a simple process to update AT&T LG G2 D800 running D80020y to Lollipop?
I was able to find the official Lollipop .zip file (LGD800_Android_Lollipop_D800.zip) for D800 on LG's website but wondering how to install it. The file is 0.98GB in size which is apparently a FULL ROM.
Link to file: http://opensource.lge.com/fileMgr/download/op/LGD800/506481?
Please help!!
mayurjango said:
Could you please suggest a simple process to update AT&T LG G2 D800 running D80020y to Lollipop?
I was able to find the official Lollipop .zip file (LGD800_Android_Lollipop_D800.zip) for D800 on LG's website but wondering how to install it. The file is 0.98GB in size which is apparently a FULL ROM.
Link to file: http://opensource.lge.com/fileMgr/download/op/LGD800/506481?
Please help!!
Click to expand...
Click to collapse
No, u cant flash it... it is the open source, not the rom, it will brick ur device...
u just need the 700mb file of the link, and put the comands (as the 2nd link explains).... will not take more than 5min
guynaa said:
after i ran this, and the phone restarted and started updating, after 1% progress, i got a black screen with "Err:0x1111004"
the phone restarted into the older firmware without damage, any hints?
EDIT: i tried restoring all bloatware apps - did not work,
i also tried putting everything in place, unrooting and then starting the update - also did not work
Click to expand...
Click to collapse
u have the d80020y without any system modification or custom recovery before putting the lp file?
Abrilabr said:
No, u cant flash it... it is the open source, not the rom, it will brick ur device...
u just need the 700mb file of the link, and put the comands (as the 2nd link explains).... will not take more than 5min
Click to expand...
Click to collapse
Oh, thanks for the info. So, the device needs to be rooted to proceed with this procedure?
I request you to add all the steps here at one place required to update from 20y to Lollipop on D800 by installing the OTA manually. The steps there look pretty confusing there.
Also, I'm unable to download the file from Mediafire. On clicking 'Authorize Download', it reloads the same page.
Will really appreciate your help! Thanks
moiramd said:
I press on authorize download and nothing happen
---------- Post added at 02:36 AM ---------- Previous post was at 02:36 AM ----------
Please tell me how to download the file.
---------- Post added at 02:58 AM ---------- Previous post was at 02:36 AM ----------
Downloading already
Click to expand...
Click to collapse
Hey men, me ayudas a flashear Lollipop en mi D800 tambien... es que tengo la Simple ROm v1.2 y no lo quiero brickear :l
so i need to go back to 20c? or can i go to straight from 20k?
Gemc666 said:
so i need to go back to 20c? or can i go to straight from 20k?
Click to expand...
Click to collapse
from 20k i advice u go to 20y and then lollipop which is 30f. i did mine yesterday. you would lose root but its only a matter of time before someone roots lollipop
if i have simple rom v1.2, how i can go back to Kitkat 20y?
kenennaoyeka said:
from 20k i advice u go to 20y and then lollipop which is 30f. i did mine yesterday. you would lose root but its only a matter of time before someone roots lollipop
Click to expand...
Click to collapse
How you updated from 20y to 30f on AT&T D800? Please share if there is any clear guide with step-by-step instructions.
Also, from where do I download the OTA update file?
kenennaoyeka said:
from 20k i advice u go to 20y and then lollipop which is 30f. i did mine yesterday. you would lose root but its only a matter of time before someone roots lollipop
Click to expand...
Click to collapse
dont care much about root, but what about my apps? will i lose them too?
some other mirror, mediafire is so slow and breaking in between.been trying for an hour.
gave up, its no use, not downloading, slow and than it stops in between
is there a way to make a flashable zip of the stock rom after installed?
some err:0x...... is appearing
not able to flash
---------- Post added at 04:31 PM ---------- Previous post was at 04:26 PM ----------
guynaa said:
after i ran this, and the phone restarted and started updating, after 1% progress, i got a black screen with "Err:0x1111004"
the phone restarted into the older firmware without damage, any hints?
EDIT: i tried restoring all bloatware apps - did not work,
i also tried putting everything in place, unrooting and then starting the update - also did not work
Click to expand...
Click to collapse
you found ny solution ? same problem
i got it working after a fresh install from 20c
Gemc666 said:
dont care much about root, but what about my apps? will i lose them too?
Click to expand...
Click to collapse
No, all your apps should remain. on your phone. Except for some reason I lost my WiFi passwords.
- AP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT_meta.tar
- BL_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CSC_ATT_G930AATT4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
Yep, muniz_ri came through again! Thanks...
Switching between AT&T and U firmware more often than using the phone LOL. It would really suck without full firmware!
is this an official firmware? do i need an official odin?
yes and yes
ok thank you!
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
one last question. it doesn't matter on what firmware i was before right?
davidmclaren said:
ok thank you!
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
one last question. it doesn't matter on what firmware i was before right?
Click to expand...
Click to collapse
Correct
I have tried to use Odin (3.12.3 and 3.12.17) to flash fhese .tar files; however, Odin does not see any files in the folder. Yesterday, I was able to flash an older version of Nougat with a .tar.md5 filename just fine. But it does not see the .tar files at all.
Any help would be greatly appreciated.
buddesc said:
I have tried to use Odin (3.12.3 and 3.12.17) to flash fhese .tar files; however, Odin does not see any files in the folder. Yesterday, I was able to flash an older version of Nougat with a .tar.md5 filename just fine. But it does not see the .tar files at all.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Did you extract the files once you downloaded them?
You have to extract the files.
dirtydodge said:
Did you extract the files once you downloaded them?
Click to expand...
Click to collapse
No. I did not. Thank you.
muniz_ri said:
- AP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT_meta.tar
- BL_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CP_G930AUCU4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
- CSC_ATT_G930AATT4BQD4_CL11198144_QB13294191_REV02_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
Are these to flash from G935A to Unlocked variant? Also what android version are they?
photobumm said:
Are these to flash from G935A to Unlocked variant? Also what android version are they?
Click to expand...
Click to collapse
This doesn't unlock anything. Did you look at the file name to see what "version" they are. Kinda is spelled out in the first 13 or so letters and numbers. Also, these files are for the S7 flat
dirtydodge said:
This doesn't unlock anything. Did you look at the file name to see what "version" they are. Kinda is spelled out in the first 13 or so letters and numbers. Also, these files are for the S7 flat
Click to expand...
Click to collapse
First comment mentioned "Switching between AT&T and U firmware" so I figured these files had something to do with that switch.
photobumm said:
First comment mentioned "Switching between AT&T and U firmware" so I figured these files had something to do with that switch.
Click to expand...
Click to collapse
Oh OK. I see where that could be confusing, there meaning the Muniz is working on both, this firmware and the U firmware.
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
I am not sure.
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
I think it will, qd4 is latest stock unrooted.
qodegie said:
I have an unlocked at&t s7 flat and i want to update with this firmware, my latest firmware is G930AUCU4BQA6, will it re-lock the phone or not?
Click to expand...
Click to collapse
If you mean sim unlock, the answer is no. Flashing firmware does not lock an unlocked device.
Has anyone tried to root this yet
For those who have used this and 7.0 U firmware, which do they find faster and more stable?
I found them to perform identically.
FOR A6+ (A605FN)
1-Unlock your OEM & activate USB debugging on Developers Options.
2-Restart on Dowload Mode & Flash the 4 firmware files with Odin.
3-Instal Magisk.apk & SuperUser will be working for delete bloatware,modify the system & install apps that require superuser permissions.
A605FNXXU2ARG2 - DOWNLOAD
Magisk Manager - DOWNLOAD
THANKS TO MAGISK FOR THE NEW ROOT METHOD WITHOUT RECOVERY
If I have helped you, invite me to a beer by clicking HERE.
Will safetynet check work?
DKzVeNgEnS said:
Will safetynet check work?
Click to expand...
Click to collapse
For now we have to choose between having root or pass the Safetynet.
Do not sew odin, mistake
kes228 said:
Do not sew odin, mistake
Click to expand...
Click to collapse
It is compressed in ZIP,
First you have to extract the 4 files.
It is also important not to rename the files.
josemaesra said:
It is compressed in ZIP,
First you have to extract the 4 files.
It is also important not to rename the files.
Click to expand...
Click to collapse
I pulled out 4 archives, I put one does not sew,On the body it says that the current is official, the bootloader is unlocked everywhere stand OFF http://prntscr.com/knd460
kes228 said:
I pulled out 4 archives, I put one does not sew,On the body it says that the current is official, the bootloader is unlocked everywhere stand OFF http://prntscr.com/knd460
Click to expand...
Click to collapse
Try with this ODIN,
& say me if working,please,
thanks.
josemaesra said:
Try with this ODIN,
& say me if working,please,
thanks.
Click to expand...
Click to collapse
Also does not sew ( http://prntscr.com/kndfnb
kes228 said:
Also does not sew ( http://prntscr.com/kndfnb
Click to expand...
Click to collapse
If possible, send me your official boot.img and I can patch it in 5min.
josemaesra said:
If possible, send me your official boot.img and I can patch it in 5min.
Click to expand...
Click to collapse
I will grateful to you https://drive.google.com/open?id=1lbou9k_VvraEwKMuyqn57bBg1kP4LxMc
kes228 said:
I will grateful to you https://drive.google.com/open?id=1lbou9k_VvraEwKMuyqn57bBg1kP4LxMc
Click to expand...
Click to collapse
This is you patchet boot.img - Download
[/COLOR]
josemaesra said:
This is you patchet boot.img - Download
Click to expand...
Click to collapse
Do not sew, nothing is written on the phone http://prntscr.com/kndrvh
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
josemaesra said:
This is you patchet boot.img - Download
Click to expand...
Click to collapse
Can I flash your firmware? with your region?
Here is my worth
http://cs5-3.4pda.to/13690992/Scree...Settings.jpg?c9a72894c1607654b646c19c7ce6be4e
kes228 said:
[/COLOR]
Do not sew, nothing is written on the phone http://prntscr.com/kndrvh
---------- Post added at 01:19 PM ---------- Previous post was at 01:17 PM ----------
Can I flash your firmware? with your region?
Here is my worth
http://cs5-3.4pda.to/13690992/Scree...Settings.jpg?c9a72894c1607654b646c19c7ce6be4e
Click to expand...
Click to collapse
I do not know what that error is due to,
but the solution is to flash your official firmware and then flash your patched boot.img,
this patched boot.img can not return error since it is the one corresponding to your official firmware.
josemaesra said:
I do not know what that error is due to,
but the solution is to flash your official firmware and then flash your patched boot.img,
this patched boot.img can not return error since it is the one corresponding to your official firmware.
Click to expand...
Click to collapse
It is a pity that it does not work out
kes228 said:
It is a pity that it does not work out
Click to expand...
Click to collapse
I tried flashing your boot.img and I get `` device not supported '',
so the boot.img is different for each region and firmware.
What is your region? And firmware, I'll try)
kes228 said:
What is your region? And firmware, I'll try)
Click to expand...
Click to collapse
My firm is A605FNXXU2ARG2 and my region is PHE
josemaesra said:
My firm is A605FNXXU2ARG2 and my region is PHE
Click to expand...
Click to collapse
Thank you, and can your patched boot from your firmware if everything gets done, I'll sign you off
Guys, I need help! I got a demo unit a605x. On joys stitched through one official firmware for Russia. Everything went without errors, but when you restart and further installation does not give the modem and the inscription in English, they say, contact the operator. After reading the forum I can not understand what I did wrong? I understood that it was necessary to sew without a file of the CP (responsible for the modem)? And another point, does the process of firmware OEM option lock: on/off? Or he is affected with the unofficial firmware? I didn't change it, maybe that's the problem. What I just did not put the firmware, all by. Maybe there are bright heads here? Thanks in advance!
josemaesra said:
If possible, send me your official boot.img and I can patch it in 5min.
Click to expand...
Click to collapse
when @kes228 already failed, and then Odin patched given but still error, the date still 27. maybe his cellphone already in RMM prenormal condition..
I realize that there are some issues about global realme XT, I came to a lot of problems like others. Let me summarize some points:
1. Global version : (Ru/Eu/TW/......)
*come with NFC
the main difference between global and India version
(you can't tell between EX and EUEX) , so NFC is the key.
*cannot unlock bootloader (from os6 to os7)
If you do unlock bootloader, try to show us how.
*cannot root (unless BL unlocked)
*do not update to India Rom, if you do try this post
https://forum.xda-developers.com/realme-xt/help/realme-ui-bugs-eu-device-t4076145
*the lastest update is Android 10 ui c.01 (update a.05 to a.06 first before to c.01)
https://realmeupdater.com/downloads/latest/RMX1921EUEX/
https://download.c.realme.com/osupdate/RMX1921EUEX_11_OTA_1010_all_lZytoJtMnV4X.ozip
which is newer than India c.03 rom, I think that's why we still can update via recovery mode.
*Realme Official ROMs Archive for Realme XT
https://realmeupdater.com/downloads/archive/RMX1921EUEX/
anyone with other issues please add on. Thanks!
-- unlock bootloader is possible now, however I don't have xt anymore --
Hi, where is this being downloaded from. Took over two hours then it gave me a failed download notice so I tried two more times with failed again. Thanks
the lastest update is Android 10 ui c.01
the link is still working.
https://download.c.realme.com/osupdate/RMX1921EUEX_11_OTA_1010_all_lZytoJtMnV4X.ozip
donkeyman1234 said:
the lastest update is Android 10 ui c.01
the link is still working.
https://download.c.realme.com/osupdate/RMX1921EUEX_11_OTA_1010_all_lZytoJtMnV4X.ozip
Click to expand...
Click to collapse
I'll try again thanks....
mdcowby said:
I'll try again thanks....
Click to expand...
Click to collapse
How do you install this once downloaded When I go into recovery and click this file I get an error. Do you have to unzip it I've never messed with. .ozip files
Thanks for your help
No. I think you're at A.05. Then update to A.06.
After that you can update to Android 10.
schwatter said:
No. I think you're at A.05. Then update to A.06.
After that you can update to Android 10.
Click to expand...
Click to collapse
Correct I have A. 05 so I have to update to A. 06 then. where can I find the A. 06 I have global realme xt just want to make sure I grab the right download.
firmware can be downloaded here:
https://realmeupdater.com/downloads/archive/RMX1921EUEX/
donkeyman1234 said:
firmware can be downloaded here:
https://realmeupdater.com/downloads/archive/RMX1921EUEX/
Click to expand...
Click to collapse
Thanks so much.....
---------- Post added at 07:53 AM ---------- Previous post was at 07:43 AM ----------
mdcowby said:
Thanks so much.....
Click to expand...
Click to collapse
One more? When I put it on my SD card how do I install it. I'm not used to, .ozip files
Boot into recovery mode and choose update from sd card. Or just move the file to the phone memory and use phone's file explorer to open it, then the phone shall be able to update.
But wait. Some say A.05 can unlock bootloader. If you need it, test it. Maybe you have luck.
donkeyman1234 said:
Boot into recovery mode and choose update from sd card. Or just move the file to the phone memory and use phone's file explorer to open it, then the phone shall be able to update.
Click to expand...
Click to collapse
Perfect thanks again. worked perfectly now I just hope installing to Android 10 I'll do that tomorrow. Stay safe
---------- Post added at 08:55 AM ---------- Previous post was at 08:47 AM ----------
schwatter said:
But wait. Some say A.05 can unlock bootloader. If you need it, test it. Maybe you have luck.
Click to expand...
Click to collapse
I'm not into all that anymore I spent more time on my lgv20 phone then with anything else. I do like the opinion of rooting at some point if this will root. I had a Lgv20 since 2016 loved that phone. But I'm enjoying this one a lot. I just want to be updated to the latest versions. And security patches. Thanks again for your help.