Just received my case yesterday, it fits well, has a little ridge around the front that will protect the screen when put face down, fingerprint sensor is still easy to use, all in all it is pretty good. They did send a note saying they will be making more colors soon.
Edit
With the case on connecting to the charger is a little difficult. Oblong hole in the case and a rectangle plug does not match that good. It does work but you need to make sure that it is actually charging.
Yeah I actually was just looking at the new colors this morning.. I saw a dark navy blue, orange, and razer green that wasn't available previously when I ordered my clear one
Got orzly case too in two colors.
It's just a regular chinese-made case, you can get it on AliExpress much cheaper.
With the case on you can't swipe from the very edge of the screen. Also you can't charge it easily because the hole near the USB port doesn't fit the charging cable.
I do not recommend to buy it.
Used the ORZLY case for about a week before getting fed-up with the charging cable being finicky to get in. Bought the TUDIA case and it's fantastic. Can't recommend it enough.
Yeah orzly really botched the Razer cases.. I'm using a generic unbranded from ebay and it fits alot better!
Yep I have a tudia as well and I've had similar looking cases for the past 5 devices now ?
I too am using the Tudia case... Since Orzly screwed up on the usb c port. I'll maybe mod it later.
FanboyStudios said:
I too am using the Tudia case... Since Orzly screwed up on the usb c port. I'll maybe mod it later.
Click to expand...
Click to collapse
Edit, I found just pushing the USB C connector into the charging port works fine and actually might hold the jack in better because of the tight fit.
Related
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
Hey guys
I'm on the lookout for a great looking case for the Z2, I need it to take scratches only, I don't want shock protection as much. I found spigen ultra hybrid to be totally transparent, good on safety too?! Any users can shed some light on this case? Worth a buy?
Thanks in advance guys!
hmmm...
mokaigutti said:
Hey guys
I'm on the lookout for a great looking case for the Z2, I need it to take scratches only, I don't want shock protection as much. I found spigen ultra hybrid to be totally transparent, good on safety too?! Any users can shed some light on this case? Worth a buy?
Thanks in advance guys!
Click to expand...
Click to collapse
I have that case too white version, but after two weeks, i take it off coz it doesn't support charging docks...
gokongming said:
I have that case too white version, but after two weeks, i take it off coz it doesn't support charging docks...
Click to expand...
Click to collapse
Is that so? I was planning to buy this case, but I also want to use dock.
So, it's a no?
Ended up buying the case, pretty good quality and I don't use the charging dock so that wasn't an issue, although the flimsy bit near the sim card slot is a let down, I wouldn't recommend it just because of that
I have this case and I love it. That flimsy bit is no big deal as it's not really in a place where protection from bumps or scratches is really an issue. For charging, I used an Xacto knife and a Dremmel to make an opening that works with the standard magnetic charging cables that you can find on Amazon. However, due to case thickness, the dock WILL NOT work with the case on regardless of the custom opening I made or how you adjust the dock. That being said, I only use the dock on my nightstand and my home office desk. At work or on the road (including in the car) I have magnetic charging cables. The thing I really like about this case is that it comes off and goes on SO EASY, yet still fits snugly once on. That makes it a simple task to pop it out of the case (3 seconds tops) at night or at my desk to put in the dock.
HTH.
-Hans
Spigen always provide the best case of the Hero model devices!! I using the Neo Hybrid of my Note 3 also, planning to get Xperia Z2.
I had the case but returned it after a week. It makes the phone extra bulky and big that doesn't feel right or comfortably in my hands. My phone I now naked with a carbon fiber skins all the way around and I think that is the best combo there is
Sent from my D6503 using Tapatalk
Looks pretty nice
https://tpu-cases.com/index.php?main_page=product_info&cPath=69_106&products_id=409
Sent from my D6503 using XDA Free mobile app
indeed it does, you should order it and let us know, i would but i dont thrust new sites
BlacKca7 said:
indeed it does, you should order it and let us know, i would but i dont thrust new sites
Click to expand...
Click to collapse
i would definitely buy it but there isn't any cut for the magnetic charger, don't feel like opening the flappy microSD and charger every time for charging.
Slip your Sony Xperia Z2 into this custom fit Matte Back Black TPU Case by Diztronic and experience the peace of mind of knowing your investment is well protected. Flexible, yet stronger and more durable than silicone, TPU offers excellent shock absorption and abrasion resistance while maintaining a thin form factor.
Just bought one
I just ordered a matte black Diztronic case from their website listed by the OP. I haven't even received my new-to-me-but-used Xperia yet, but I'm thinking ahead! I have the same type of Diztronic case on my Nexus 4 and it's been absolutely great for over 1.5 years use, and a handful of good drops. I do wish the cutout was there for the magnetic charger, but I still wanted to see what it was like, maybe even cut that section out by hand if the rest of the case makes it good enough to keep.
Love it, but...
lddk23 said:
I just ordered a matte black Diztronic case from their website listed by the OP. I haven't even received my new-to-me-but-used Xperia yet, but I'm thinking ahead! I have the same type of Diztronic case on my Nexus 4 and it's been absolutely great for over 1.5 years use, and a handful of good drops. I do wish the cutout was there for the magnetic charger, but I still wanted to see what it was like, maybe even cut that section out by hand if the rest of the case makes it good enough to keep.
Click to expand...
Click to collapse
FWIW, after a few months, I love this Diztronic case...except I do dislike taking the phone out of the case to charge in my dock. It's not annoying enough for me to use something else, however, as this case is really perfect fitting, durable, not slippery, and looks nice if you like the matte finish. The other slim case I bought has a cutout for the charging dock, but still doesn't actually fit (with either spacer option). I'd have to 3D print a custom cradle spacer with additional clearance on one side, and that's not worth it. So, alas, I will probably continue to just take it out of the case every night. I will say that since battery life is so good on this phone, I pretty much never have to charge during the day, so never have to open the micro-usb cover, or take the case off to use the magnetic charger adapter (which I usually only use for traveling).
Simple and good~
Just got my cover in the mail today. Unfortunately it leaves a bit gap at the bottom where the USB port is. Anyone else got this cover and have the same issue? Also the buttons are a bit stiff.
deadman3000 said:
Just got my cover in the mail today. Unfortunately it leaves a bit gap at the bottom where the USB port is. Anyone else got this cover and have the same issue? Also the buttons are a bit stiff.
Click to expand...
Click to collapse
Yes, mine is pretty similar.
I can live with it, it is quite a decent case for the cash and I like the stiffer buttons as they help to prevent 'pocket presses'
bisto321 said:
Yes, mine is pretty similar.
I can live with it, it is quite a decent case for the cash and I like the stiffer buttons as they help to prevent 'pocket presses'
Click to expand...
Click to collapse
Ah! OK that's interesting to know. My main concern was it being a weak point during a drop (like if something hitting it square on the front edge). It's a shame it's not just a little more snug fitting as it would be perfect otherwise. The main reason I got this case instead of a standard TPU is so I can put the metal plate for my magnetic car phone holder behind the plastic back which works really well. I do notice when putting the USB cable in the phone can shift slightly up and down in the rubber housing. It's just a fraction longer than it should be. I have also ordered the Brotect screen protector after trying some other brand that is absolute carp! I am waiting on a refund for those (ordered 3 of them in case I messed up the first). I also have an issue with garbled voice on calls but not sure if that is down to my network or not yet.
Also the lack of accessories is rather depressing.
But that's what happens when you don't follow the iPhone/Samsung crowd.
Fun and games eh?
deadman3000 said:
Ah! OK that's interesting to know. My main concern was it being a weak point during a drop (like if something hitting it square on the front edge). It's a shame it's not just a little more snug fitting as it would be perfect otherwise. The main reason I got this case instead of a standard TPU is so I can put the metal plate for my magnetic car phone holder behind the plastic back which works really well. I do notice when putting the USB cable in the phone can shift slightly up and down in the rubber housing. It's just a fraction longer than it should be. I have also ordered the Brotect screen protector after trying some other brand that is absolute carp! I am waiting on a refund for those (ordered 3 of them in case I messed up the first). I also have an issue with garbled voice on calls but not sure if that is down to my network or not yet.
Also the lack of accessories is rather depressing.
But that's what happens when you don't follow the iPhone/Samsung crowd.
Fun and games eh?
Click to expand...
Click to collapse
Good idea for the use of the removeable plate.
Yes, bit disappointing about accessories - but the phone is great.
I have a Nillkin hardcase and a Nillkin flip case too - both really good and much slimmer fit than the J&D, but they offer less protection, so I will stick with J&D for now
I have the Incipio version of that case style, it fits great.
http://www.incipio.com/cases/smartp...cases/dualpro-case-motorola-droid-turbo2.html
How thick does this make the phone
Hey all if anyone looking for the new Pitaka MagEZ Case for S20 series it's finally out. Mine is on the way, Pitaka makes awesome products.
If you plan on ordering anything take a look and use the link below for extra 10% off.
http://pitaka.refr.cc/ivanmann
Got my shipping notification today as well. Ordered the MagEZ and dashboard mount wireless charger. Are you in the US? How long do you think it will take to deliver?
Shipping notice on DHL site updated w Tuesday (4/7) delivery now.
They're really quick with shipping. Have ordered several of their products. I'm in Canada, my case should come this week.
When did you order?
I ordered Monday night and the web site indicated that it would ship the next day.
Here it is Thursday afternoon and I have not received any notification. Clicking on the order link in the original email just shows the same thing: order received. Do they ship from China?
Thinking of cancelling TBH.
Yes they ship from China. You should get something soon. But reach out to their support team in case. They're very responsive and helpful usually.
bigmann77 said:
Yes they ship from China. You should get something soon. But reach out to their support team in case. They're very responsive and helpful usually.
Click to expand...
Click to collapse
Funny, just after dinner I got an email with shipping notice.
I have a tracking number with an origin a state away (NJ), USPS first class package.
Should arrive in a few days.
I want to see what all the hype is about.
I got the magnetic one. I do have magnetic vent mounts from my excellent Evutec cases. I wish they made Samsung cases, by far they are my favorite.
Got my carbon fiber look on too!
wrong section
mali019 said:
wrong section
Click to expand...
Click to collapse
How so?
jlip5617 said:
Got my carbon fiber look on too!
Click to expand...
Click to collapse
Nice, have you tried taking pics in the bright sunlight, off axis and using the flash to see if it produces any unusual artifacts like flaring or hazing?
cpufrost said:
Nice, have you tried taking pics in the bright sunlight, off axis and using the flash to see if it produces any unusual artifacts like flaring or hazing?
Click to expand...
Click to collapse
I haven't noticed any issues so far!
I am waiting for carrier to pickup. Got tracking number ,but not picked up yet
So got my MagEZ and the wireless charger dash mount. Did not expect the metal plates to be so low on the phone body - I guess that's how they don't block the wireless charging coil.
I'm actually more disappointed in the lack of screen coverage. The sides of the phone are the most exposed in this case then any other case I've tried but worst is the lack of lip on the top of bottom. On every other case I've tried, there is at least some gap when I turn it face down on the table - with this case on, this is pretty much laying down flush on the screen itself.
Got my MagEZ today, finally nearly two weeks after ordering. USPS isn't the greatest for sure!
It's a good case. Definitely NOT for protection. I mean it will provide more protection than nothing. In hand it feels nice. The presentation is also good. As in you can tell it's not an Otterbox!
If one want's thinner they'd have to skin their phone. There's something about a naked phone, dunno, the edges feel weird like I'm going to drop it in an instant. It's weird because before the days of non removable batteries it actually didn't feel "wrong" rocking a naked phone...
jlip5617 said:
Got my carbon fiber look on too!
Click to expand...
Click to collapse
So that is a latercase, no Pitaka with metal plates (and still wirelessly charging).
I like the latercases rim being bent upwards but they are missing the metal plates.
Also, I do not like the manufacturers actions around Pitaka and would therefore, personally, not buy from them. But that is my personal opinion only.
corwin_amber said:
So that is a latercase, no Pitaka with metal plates (and still wirelessly charging).
I like the latercases rim being bent upwards but they are missing the metal plates.
Also, I do not like the manufacturers actions around Pitaka and would therefore, personally, not buy from them. But that is my personal opinion only.
Click to expand...
Click to collapse
Agreed. Latercase straight up ripped Pitaka off and just because he has a bigger audience felt he could get away with it.
I got the Pitaka Mag case as well. This is my 3rd Pitaka case. Had this on my s8 and s10 before. This model seems to fit lower on the sides than previous models and the cutout for the charging port is wide open this year. Not sure why. This is still my favorite case because it's strong, super thin, and metal plates for car mount.
sdotagain said:
I got the Pitaka Mag case as well. This is my 3rd Pitaka case. Had this on my s8 and s10 before. This model seems to fit lower on the sides than previous models and the cutout for the charging port is wide open this year. Not sure why. This is still my favorite case because it's strong, super thin, and metal plates for car mount.
Click to expand...
Click to collapse
It's open at the bottom because to close it there would be a very thin strip that would be rather flimsy. Still far better than having the entire bottom open.
My only gripe about this case is how hard it is to take off! But once it's on, it's very solid and doesn't feel like it's peeling away or falling off when you grab the edges like most thin TPU style cases.
I have to say that it is perfect, IMO. I am using Pitaka since the S8 and they are always in a class of their own. I tried like 100 cases over the years and I have settled to this:
- Pitaka Mag Case for daily, normal use. This is the best for me.
- "Self made" Pitaka Pro case (more sturdy) using a dbrand grip case and placing the Pitaka metal plates in the right places under the back skin, salvaged from an old Pitaka case (destructive). This is the sturdy case, still offering magnetic attachment and wireless charging.
corwin_amber said:
I have to say that it is perfect, IMO. I am using Pitaka since the S8 and they are always in a class of their own. I tried like 100 cases over the years and I have settled to this:
- Pitaka Mag Case for daily, normal use. This is the best for me.
- "Self made" Pitaka Pro case (more sturdy) using a dbrand grip case and placing the Pitaka metal plates in the right places under the back skin, salvaged from an old Pitaka case (destructive). This is the sturdy case, still offering magnetic attachment and wireless charging.
Click to expand...
Click to collapse
Good idea! I wish they would make the procase for Galaxy phones. I too use the MagEz case as my daily and now using the Ringke Fusion X as my rugged case when needed. Last year I tried those O shaped metal rings attached to the back of a Tech 21 but it still didn't quite line up with the car mount. I thought about getting the plates from a previous case but luckily been able to resell them for close to 50% value.