Before unlocking or flashing my XT1650-03 it was labelled as retapac and I haven't been able to find any retapac 7.0 images for fastboot but I've found other regions, are they safe to flash?
Yes it's safe, I have done that (I have retmx and used a retbr) and it works exactly the same
Malmarox said:
Yes it's safe, I have done that (I have retmx and used a retbr) and it works exactly the same
Click to expand...
Click to collapse
How do you changed it? You unlocked the bootloader or something like that?, Im thinking about change my reteu stock rom by retbr too.
vok01 said:
How do you changed it? You unlocked the bootloader or something like that?, Im thinking about change my reteu stock rom by retbr too.
Click to expand...
Click to collapse
I use this steps:
0. Download files
1. install motorola device manager
2. install minimal adb&fastboot
3. extract files from zip and put them in the same directory as fastboot.exe
3. boot phone into fastboot mode
4. flash via fastboot:
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
I don't know if you need to have unlocked bootloader, when I tried it, I already had it unlocked.
Variant xt1605-05
I have a doubt, I have a Chinese version xt1605-05, I do not want to use Chinese roms, can I flash an xt1605-03 retbr? deleting gpt.bin and bootloader? sorry my english is bad
Related
Hi guys, I've tried all the threads so far and have got no where. I unlocked my device and flashed a custom rom, that worked fine. I then noticed no way to go back to stock so I tried the odexed version with no luck. Now any rom I flash does not boot, just loops back to twrp. I would like to get as close to stock as possible even if it's another region. Has anyone had any luck on getting their phones booting after this?
I've tried flashing stock firmware from 6.0.1 then flashing ota through side load
Flashing other countries firmware (which always ends in fail messages)
I've tried multiple rom from the forum which just loop.
I've spent about 6 hours trying different combinations of recovery, boot and other images with no luck.
Any help is appreciated.
Sent from my iPhone using Tapatalk
criptix said:
Hi guys, I've tried all the threads so far and have got no where. I unlocked my device and flashed a custom rom, that worked fine. I then noticed no way to go back to stock so I tried the odexed version with no luck. Now any rom I flash does not boot, just loops back to twrp. I would like to get as close to stock as possible even if it's another region. Has anyone had any luck on getting their phones booting after this?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I have gotten stuck with bootloops a couple times now, for me re-flashing a backup or custom rom or custom kernel didn't fix it either. Keep in mind that you cannot go back to 6.0.1 once you have flashed 7.0, the bootloader won't allow it. I have had to flash back to a stock firmware from https:// firmware.center/firmware/Motorola/Moto%20Z/Stock/XT1650-03/ (remove the space after https:// ) and re-fastboot flash TWRP, re-root, and restore my Titanium Backups to get going again.
It's extremely helpful if you create a servicefile.bat to flash all the firmware parts in the right order. This is the one I made for flashing the RETMX 7.0 image (the main difference I noticed between different firmwares from that link is the number of sparsechunks, so add or delete lines as necessary. I'm sure all this info is available elsewhere, but I didn't manage to find it all in one shot. So I figured I would post it to help others out that are in the same boat. Also note that even though you are re-flashing the bootloader.img it does not re-lock your bootloader.
Code:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash oem oem.img
fastboot erase carrier
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
Copy the above text and paste it into a new text file and change the name to "servicefile.bat" without quotes (not servicefile.bat.txt), and drop it in with the extracted firmware files. Then either copy-paste your adb and fastboot files into that folder or drop all that folder's contents into your Users/*YOURNAME*/App Data/Local/Android/sdk/platform-tools/ folder. Or better yet, add "%USERPROFILE%\AppData\Local\Android\sdk\platform-tools" to your Path in your system's Environment Variables. The latter will make adb and fastboot work from any command prompt window, then you can just press shift+right-click in the folder that already has the firmware files and choose "Open command window here" and then just type servicefile.bat and press enter. Hope this helps! Good Luck and Happy Flashing!
HippieFlasher said:
I have gotten stuck with bootloops a couple times now, for me re-flashing a backup or custom rom or custom kernel didn't fix it either. Keep in mind that you cannot go back to 6.0.1 once you have flashed 7.0, the bootloader won't allow it. I have had to flash back to a stock firmware from https:// firmware.center/firmware/Motorola/Moto%20Z/Stock/XT1650-03/ (remove the space after https:// ) and re-fastboot flash TWRP, re-root, and restore my Titanium Backups to get going again.
It's extremely helpful if you create a servicefile.bat to flash all the firmware parts in the right order. This is the one I made for flashing the RETMX 7.0 image (the main difference I noticed between different firmwares from that link is the number of sparsechunks, so add or delete lines as necessary. I'm sure all this info is available elsewhere, but I didn't manage to find it all in one shot. So I figured I would post it to help others out that are in the same boat. Also note that even though you are re-flashing the bootloader.img it does not re-lock your bootloader.
Code:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash system system.img_sparsechunk.13
fastboot flash system system.img_sparsechunk.14
fastboot flash system system.img_sparsechunk.15
fastboot flash system system.img_sparsechunk.16
fastboot flash oem oem.img
fastboot erase carrier
fastboot oem fb_mode_clear
pause
fastboot reboot
exit
Copy the above text and paste it into a new text file and change the name to "servicefile.bat" without quotes (not servicefile.bat.txt), and drop it in with the extracted firmware files. Then either copy-paste your adb and fastboot files into that folder or drop all that folder's contents into your Users/*YOURNAME*/App Data/Local/Android/sdk/platform-tools/ folder. Or better yet, add "%USERPROFILE%\AppData\Local\Android\sdk\platform-tools" to your Path in your system's Environment Variables. The latter will make adb and fastboot work from any command prompt window, then you can just press shift+right-click in the folder that already has the firmware files and choose "Open command window here" and then just type servicefile.bat and press enter. Hope this helps! Good Luck and Happy Flashing!
Click to expand...
Click to collapse
Dude, you are awesome. Worked like a charm. Was missing fastboot getvar max-sparse-size andbfastboot oem fb_mode_set plus I was flashing the modem after the chunks. Thanks again!
Sent from my iPhone using Tapatalk
Anytime! Glad I could help!
hello friends ??
I am from Peru looking for yesterday from several corners of the web I found the stock ROM of the #MotoXplay ..well I now use a #MotoZplay but I also have a #MotoXplay very well preserved ..
watching on your Sim tray I noticed that there was the sim2 slot obviously blocked by my telephone operator.
the ROM I found is dual SIM and is for the region latam
I download and install it .. so far goes very well with its short 2gb ram I leave the steps and the link + the commands and some screenshots..
And yes, now I have 2 IMEI..
although it does not read the sim2 there will be some solution later.
Sorry for my bad English..
This my first post..
:V
The process is with ADb_Fastboot
ROM stock 7.1.1.
https://androidfilehost.com/?fid=889964283620759436
Commands
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Screenshots
https://pin.it/VMEIdiO
https://pin.it/1VEnQkP
https://pin.it/UiIcyiO
https://pin.it/8ea8tfO
sorry but still not loading images xda
https://forum.xda-developers.com/chef-central/android/install-android-nougat-7-1-1-official-t3691943
Perfect & Thanks!
You are awesome, no problems on an xt1563, only the commands:
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
they give error, but they are not problem to install the update. :good::good::good::good:
elvizpdx said:
looking for yesterday from several corners of the web I found the stock ROM
Click to expand...
Click to collapse
It was published already, a day before your post.
Hi guys,
Did not see anyone here on XDA who uploaded recently leaked OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
06.03.2019, THE NEWEST PPW29.116-20 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1Axk870qsui9w3TnnRQM9pt618CQ0CnHz
MIRROR: https://mega.nz/#!0ZUyTAqI!XXPwj0mcsGs0wLFwxwX8V0OeFXgCe-NXf-2VbDvr5Nc
OLDER BUILD: PPW29.116-16 FIRMWARE DOWNLOAD (RETAIL) - BE CAREFUL, IT BREAKS SAFETYNET ON EUROPEAN G6+ VARIANTS!
DOWNLOAD: https://drive.google.com/open?id=1F0SFwVyXgy3ZixL36W6xwxjqPJAwiDus
MIRROR: https://mega.nz/#!VJ8xEYRT!rb476WxlV099PVJrLwbFIr1Z3XNjo89sO5MU-HfPzMQ
OLDER BUILD: PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
--- If you don't want to erase all your phone data, use script from G6PlusFlashPieOfficial_NoErase.zip. This will upgrade your G6+ to Android Pie without erasing data. ---
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Screenshots.
PS. Digital Wellbeing installed via Magisk.
My brother has a Moto G6 Plus (bought in Europe) without root, will he be able to update it without loosing his data?
Thanks in advance guys.
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
cdfreak said:
Is it also posible to use this zip, extract it and then use Fastboot to update without losing enything? So like this:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot reboot
This is normaly how i update my G6 Plus and never expierence problems......
Click to expand...
Click to collapse
Exactly like this.
@cyberon these commands are for your brother.
rafikowy said:
Screenshots.
PS. Digital Wellbeing installed via Magisk.
Click to expand...
Click to collapse
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
thump said:
So you were able to upgrade without getting the "Verity mode is set to disabled" on the boot screen or having your System Updates disabled due to the unlocked bootloader?
Click to expand...
Click to collapse
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
smitharro said:
It works, indeed, flawless, though I used the version Vache shared on telegram. I assume it's the same file you used for this tutorial. I think it's important to mention that there are 2 possibilities to update:
1. The way you describe here
2. Use the update file (Blur_Version.29.11.11.evert.retail.en.US.zip) and place in the root of the internal storage. Then check for updates (though I think this only works when coming from a specific build).
Click to expand...
Click to collapse
which file i need to do the 2nd method and where can i download it?
rafikowy said:
"Verity mode is set to disabled" is still present on boot screen - I don't care.
System Updates were disabled at the begining - there was some information about System Integrity. After flashing Magisk 18 this information dissapeared as you noticed.
Click to expand...
Click to collapse
Just rechecked and found my System Updates page no longer gives the "system integrity" error either. Still do get the "verity" error, but seems of no concern. Cool.
giorgis91 said:
which file i need to do the 2nd method and where can i download it?
Click to expand...
Click to collapse
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
smitharro said:
This should do the trick. Remember to rename the file to Blur_Version......zip. (see my previous post).
https://mega.nz/#!RRF01QID!9QjfFmaVjWQW6ZAoqqbn-tOW9bCYgnn7IojnSgrHLJU
Click to expand...
Click to collapse
Will it wipe the phone ?
giorgis91 said:
Will it wipe the phone ?
Click to expand...
Click to collapse
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Suggestions
rafikowy said:
Hi guys,
Did not see anyone here on XDA who uploaded recently released OFFICIAL PIE fastboot image ROM for Moto G6 Plus, so I decided to do it for you all. :highfive:
This is a RETAIL release so it should work on all variants of our device (I have XT1926-3 (this is RETEU, Europe, Poland) and flashed it without any problems, phone works flawlessly).
PPW29.116-11 FIRMWARE DOWNLOAD (RETAIL)
DOWNLOAD: https://drive.google.com/open?id=1shkeHg_jxsCTLgcDjwcCgecMLJKC4EB0
MIRROR: https://mega.nz/#!MQ8BBYwJ!KpwfgunwBONWlwAYFmFUEt4UsRPpjn34jJo1GHY66fo
Flashing scripts (G6PlusFlashPieOfficial.bat from the attached .zip file can be also used, it contains the same commands as below):
If you are not sure what are you doing, ask here or read fastboot documentation before flashing anything:
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin[PHP][/PHP]
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_other.img
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
I place an "m" in front of fastboot to use mfastboot.
Get the mfastbootv2 it's best for flashing this way imo
Good work buddy.
What's the command erase carrier for?
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
giorgis91 said:
Is that multilang or only in english?
Click to expand...
Click to collapse
smitharro said:
No, it shouldn't. It's an update file. So it 'll leave all your apps and settings intact.
But if you want to be sure that you have a clean install, do a 'factory reset' prior to the update!
Oh yeah, remember to grant storage the 'motorola update services'
Click to expand...
Click to collapse
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
giorgis91 said:
Is that multilang or only in english?
---------- Post added at 10:01 AM ---------- Previous post was at 09:49 AM ----------
I ask because I'm italian and I see that the file as "en.US" in the name, i tried just now to rename the file but with "it.IT" and the system find it as an update. But i want to know if i can choose the language or it's just in english
Click to expand...
Click to collapse
All stock ROMs are multilingual. So Italian shouldn't be a problem.
what dos this mane: Verity mode is set to disabled when you boot the phone up?
cdfreak said:
what dos this mane: Verity mode is set to disabled when you boot the phone up?
Click to expand...
Click to collapse
A short explanation:
dm-verity
transparent integrity checking for block devices
read error if block integrity check fails
try to recover damaged blocks (from Android 7.0)
useful for read-only partitions like*system
fundamental part of*verified boot*on Android
Verified boot
device software integrity based on hardware root of trust
Boot chain (simplified)
verify*bootloader*using a hardware root of trust
bootloader*verifies*boot*and*recoverypartition
kernel*verifies*system*partition
uses dm-verity for the integrity checks once execution has moved to the boot partition
Hmmm. For some reason I get "Server error" in play store. And autobrightness jumps up and down every few seconds. Have tried returning to oreo and reflashing/factory resetting to no avail On reteu.
EDIT: Hmm also get the error in oreo now Anyone know whats up? Came from Lineage 16.
OFFICIAL
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
COMMANDS
Code:
#MOTO G5
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
:fingers-crossed:
Hi takoa, thanks for your efforts. What are the differences with the firmware OPP28.85-16?
security update
Is this flashable in any cedric? I have a Moto G5 XT1675 italiani TIM brand (now with pixelexperience)
Any hope for capturing OTA update? I'd prefer to flash delta update instead of factory image
Hi. I’m currently on Android 7, build NPPS25.137-72-4, reteu channel.
I can directly flash this via fastboot to get 8.1? Thanks!
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
yilhernandez said:
xfahim Hi, of course you can directly flash this firmware to go to 8.1. Greetings
Click to expand...
Click to collapse
Ah so it doesn’t matter which version am I using? I thought I’d need something for the reteu channel. Thanks for the confirmation!
moto g5
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
juan raul perez kana said:
hola amigo, donde puedo descarar el firmware: CEDRIC_RETAIL_8.1.0_OPP28.85-19-4-2_cid50 para el moto g5 xt1670
Click to expand...
Click to collapse
Code:
https://mirrors.lolinet.com/firmware/moto/cedric/official/
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
TheFixItMan said:
Get the latest firmware from
https://mirrors.lolinet.com/firmware/moto/cedric/official/
Fastboot commands
Note in order to flash gpt & bootloader the firmware must be the same or newer than what is on your device
If you get a security downgrade error the firmware you are trying to flash is too old
Click to expand...
Click to collapse
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
vaibhavsirohi91 said:
Already got the latest one from RETIN folder (India)but still my device stuck into bootloop
Click to expand...
Click to collapse
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
TheFixItMan said:
Assuming you got no errors when flashing the firmware & all parts of the firmware were flashed correctly
Did you erase userdata?
You can also go into stock recovery mode and factory reset
Also you can try & remove any sim & sdcards from the device & see if it boots without them
Click to expand...
Click to collapse
I am getting these errors and i can't even access recovery
vaibhavsirohi91 said:
I am getting these errors and i can't even access recovery
Click to expand...
Click to collapse
Can't see any errors there but you may want to use an older fastboot version
TheFixItMan said:
Can't see any errors there but you may want to use an older fastboot version
Click to expand...
Click to collapse
Logical system not found......and i am using the latest zip from Retin folder (India)
vaibhavsirohi91 said:
Logical system not found......and i am using the latest zip from Retin folder (India)
Click to expand...
Click to collapse
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
TheFixItMan said:
I don't believe that is an error but rather an issue with that version of fastboot
I didn't say use another firmware - just use an older version of fastboot
Try versions from
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
Obviously I presume gpt & bootloader flashed successfully
Click to expand...
Click to collapse
Ok wait let me try
vaibhavsirohi91 said:
can't apply mfastboot commands and when applying fastboot commands.......my phone still stuck in bootloop
Click to expand...
Click to collapse
Sorry, but I forgot to indicate that we have to eliminate the "m" from mfastboot.
or rename fastboot.exe to mfastboot.exe :good:
Stock firmware for most variants can be found here: https://mirrors.lolinet.com/firmware/moto/parker/official/
These seem to work as my device still works after flashing the appropiate firmware for my device multiple times.
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
dgcom said:
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
Click to expand...
Click to collapse
How about QPST Flash Tool? I haven't tried it yet for myself, but according to this site: https://rootmydevice.com/download-qpst-flash-tool/ should be possible.
Hi,
What are the steps to reflshing stock firmware? I want to unlock my bootloader and flash Magisk to root my One Zoom, just in case I get a bootloop I want to flash stock, any help is appreciated, thx
Debren said:
How about QPST Flash Tool? I haven't tried it yet for myself, but according to this site: https://rootmydevice.com/download-qpst-flash-tool/ should be possible.
Click to expand...
Click to collapse
Thank you, looks very interesting, will check it out.
Someone had success flashing the motorcycle one zooom xt-2010-1 I tried it I made the steps of the command line with abd fastboot and load the files but when restarting the phone turns on and off a few times and the same room is installed somebody has been able to do it since I want to change the software channel regards
bypepe said:
Someone had success flashing the motorcycle one zooom xt-2010-1 I tried it I made the steps of the command line with abd fastboot and load the files but when restarting the phone turns on and off a few times and the same room is installed somebody has been able to do it since I want to change the software channel regards
Click to expand...
Click to collapse
Mine is at retbr, but I flashed retail and its fine, the device still reports as retbr but the other firmware is installed for sure, no bloatware and reports as 29.59-49-8 and retbr stopped at 29.59-49-5
Jaysmith696 said:
Hi,
What are the steps to reflshing stock firmware? I want to unlock my bootloader and flash Magisk to root my One Zoom, just in case I get a bootloop I want to flash stock, any help is appreciated, thx
Click to expand...
Click to collapse
The Steps are:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot reboot bootloader
After bootloader is rebooted: fastboot reboot
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
dgcom said:
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
Click to expand...
Click to collapse
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
dau999 said:
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
Click to expand...
Click to collapse
Nice! Maybe I'll try that at one point, but the issue I had with original firmware was fixed by Motorola...
dau999 said:
The Steps are:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot reboot bootloader
After bootloader is rebooted: fastboot reboot
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
Click to expand...
Click to collapse
DANGER!! XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-6_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml has newer bootloader!!!
you will not be able to switch back to
XT2010-1_PARKER_AMZEU_9.0_PPHS29.59-49-5_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
Android 10
[email protected]
I flashed PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
being on XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-13_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
and all on a amazon device.
Everything went well!! Here the command lines to use:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata **exclude if you want to keep your data**
fastboot erase ddr
fastboot reboot bootloader
Fastboot reboot
dau999 said:
[email protected]
I flashed PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
being on XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-13_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
and all on a amazon device.
Everything went well!! Here the command lines to use:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata **exclude if you want to keep your data**
fastboot erase ddr
fastboot reboot bootloader
Fastboot reboot
Click to expand...
Click to collapse
How to upload Android 10?
I have a PLAYPL version and would like to upload RETAIL.
Please help.
wiktorrent said:
How to upload Android 10?
I have a PLAYPL version and would like to upload RETAIL.
Please help.
Click to expand...
Click to collapse
unlock your bootloader, and flash via fastboot
Hi,
thanks for the instructions. Saved my brand new moto one zoom after I tried to install an unofficial lineage rom which left it completely unusable.
But I came to wonder, that I now cannot use twrp anymore. neither the latest official parker-build 3.3.4.0-0 nor the 3.3.1-6 build from mauronofrio are working anymore. Both did before all the flashing.
My best guess is, that those builds are incompatible with either the boot.img or the bootloader.img from PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.
Did you guys encounter this as well?
Were you able to lock the bootloader again or install another twrp-Version?
Do you work with banking-apps on that phone after installing this rom?
Cheers