Stock firmware for most variants can be found here: https://mirrors.lolinet.com/firmware/moto/parker/official/
These seem to work as my device still works after flashing the appropiate firmware for my device multiple times.
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
dgcom said:
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
Click to expand...
Click to collapse
How about QPST Flash Tool? I haven't tried it yet for myself, but according to this site: https://rootmydevice.com/download-qpst-flash-tool/ should be possible.
Hi,
What are the steps to reflshing stock firmware? I want to unlock my bootloader and flash Magisk to root my One Zoom, just in case I get a bootloop I want to flash stock, any help is appreciated, thx
Debren said:
How about QPST Flash Tool? I haven't tried it yet for myself, but according to this site: https://rootmydevice.com/download-qpst-flash-tool/ should be possible.
Click to expand...
Click to collapse
Thank you, looks very interesting, will check it out.
Someone had success flashing the motorcycle one zooom xt-2010-1 I tried it I made the steps of the command line with abd fastboot and load the files but when restarting the phone turns on and off a few times and the same room is installed somebody has been able to do it since I want to change the software channel regards
bypepe said:
Someone had success flashing the motorcycle one zooom xt-2010-1 I tried it I made the steps of the command line with abd fastboot and load the files but when restarting the phone turns on and off a few times and the same room is installed somebody has been able to do it since I want to change the software channel regards
Click to expand...
Click to collapse
Mine is at retbr, but I flashed retail and its fine, the device still reports as retbr but the other firmware is installed for sure, no bloatware and reports as 29.59-49-8 and retbr stopped at 29.59-49-5
Jaysmith696 said:
Hi,
What are the steps to reflshing stock firmware? I want to unlock my bootloader and flash Magisk to root my One Zoom, just in case I get a bootloop I want to flash stock, any help is appreciated, thx
Click to expand...
Click to collapse
The Steps are:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot reboot bootloader
After bootloader is rebooted: fastboot reboot
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
dgcom said:
Any idea if I can easily change software channel? I want to try and replace US Retail with EU or generic one to see if the issue with Hotspot on AT&T goes away...
Click to expand...
Click to collapse
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
dau999 said:
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
Click to expand...
Click to collapse
Nice! Maybe I'll try that at one point, but the issue I had with original firmware was fixed by Motorola...
dau999 said:
The Steps are:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot reboot bootloader
After bootloader is rebooted: fastboot reboot
---------- Post added at 07:11 PM ---------- Previous post was at 07:08 PM ----------
I reflashed original Amazon-Version Device using RetailEU
Software Channel stays at Amazon
Click to expand...
Click to collapse
DANGER!! XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-6_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml has newer bootloader!!!
you will not be able to switch back to
XT2010-1_PARKER_AMZEU_9.0_PPHS29.59-49-5_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
Android 10
[email protected]
I flashed PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
being on XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-13_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
and all on a amazon device.
Everything went well!! Here the command lines to use:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata **exclude if you want to keep your data**
fastboot erase ddr
fastboot reboot bootloader
Fastboot reboot
dau999 said:
[email protected]
I flashed PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
being on XT2010-1_PARKER_RETEU_9.0_PPHS29.59-51-13_subsidy-DEFAULT_regulatory-XT2010-1-EUROPE_CFC.xml
and all on a amazon device.
Everything went well!! Here the command lines to use:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot erase carrier
fastboot erase userdata **exclude if you want to keep your data**
fastboot erase ddr
fastboot reboot bootloader
Fastboot reboot
Click to expand...
Click to collapse
How to upload Android 10?
I have a PLAYPL version and would like to upload RETAIL.
Please help.
wiktorrent said:
How to upload Android 10?
I have a PLAYPL version and would like to upload RETAIL.
Please help.
Click to expand...
Click to collapse
unlock your bootloader, and flash via fastboot
Hi,
thanks for the instructions. Saved my brand new moto one zoom after I tried to install an unofficial lineage rom which left it completely unusable.
But I came to wonder, that I now cannot use twrp anymore. neither the latest official parker-build 3.3.4.0-0 nor the 3.3.1-6 build from mauronofrio are working anymore. Both did before all the flashing.
My best guess is, that those builds are incompatible with either the boot.img or the bootloader.img from PARKER_RETAIL_10_QPH30.29-Q3-28-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.
Did you guys encounter this as well?
Were you able to lock the bootloader again or install another twrp-Version?
Do you work with banking-apps on that phone after installing this rom?
Cheers
Related
hello friends ??
I am from Peru looking for yesterday from several corners of the web I found the stock ROM of the #MotoXplay ..well I now use a #MotoZplay but I also have a #MotoXplay very well preserved ..
watching on your Sim tray I noticed that there was the sim2 slot obviously blocked by my telephone operator.
the ROM I found is dual SIM and is for the region latam
I download and install it .. so far goes very well with its short 2gb ram I leave the steps and the link + the commands and some screenshots..
And yes, now I have 2 IMEI..
although it does not read the sim2 there will be some solution later.
Sorry for my bad English..
This my first post..
:V
The process is with ADb_Fastboot
ROM stock 7.1.1.
https://androidfilehost.com/?fid=889964283620759436
Commands
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Screenshots
https://pin.it/VMEIdiO
https://pin.it/1VEnQkP
https://pin.it/UiIcyiO
https://pin.it/8ea8tfO
sorry but still not loading images xda
https://forum.xda-developers.com/chef-central/android/install-android-nougat-7-1-1-official-t3691943
Perfect & Thanks!
You are awesome, no problems on an xt1563, only the commands:
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
they give error, but they are not problem to install the update. :good::good::good::good:
elvizpdx said:
looking for yesterday from several corners of the web I found the stock ROM
Click to expand...
Click to collapse
It was published already, a day before your post.
Before unlocking or flashing my XT1650-03 it was labelled as retapac and I haven't been able to find any retapac 7.0 images for fastboot but I've found other regions, are they safe to flash?
Yes it's safe, I have done that (I have retmx and used a retbr) and it works exactly the same
Malmarox said:
Yes it's safe, I have done that (I have retmx and used a retbr) and it works exactly the same
Click to expand...
Click to collapse
How do you changed it? You unlocked the bootloader or something like that?, Im thinking about change my reteu stock rom by retbr too.
vok01 said:
How do you changed it? You unlocked the bootloader or something like that?, Im thinking about change my reteu stock rom by retbr too.
Click to expand...
Click to collapse
I use this steps:
0. Download files
1. install motorola device manager
2. install minimal adb&fastboot
3. extract files from zip and put them in the same directory as fastboot.exe
3. boot phone into fastboot mode
4. flash via fastboot:
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot reboot
I don't know if you need to have unlocked bootloader, when I tried it, I already had it unlocked.
Variant xt1605-05
I have a doubt, I have a Chinese version xt1605-05, I do not want to use Chinese roms, can I flash an xt1605-03 retbr? deleting gpt.bin and bootloader? sorry my english is bad
As the Title suggests , its better not to unlock the bootloader for rooting, if you plan to re-sell the phone, because till now there has not been found any sure shot way to lock the bootloader again.
The motorola official site does'nt have the stock firmware for Moto Z2 Play variants yet, so until then atleast, please be patient.
For me, the only reason to maintain bootloader locked is the garantee.
totally fake, u can relock it, use any retail firmware and this commands
@Echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot flash modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash boot boot.img
fastboot oem lock
fastboot oem fb_mode_clear
pause
PAUSE
fastboot reboot
EXIT /b 0
I've sold several phones with unlocked bootloaders.
What's your worry?
This are the comands to lock bootloader without loose the imei, after lineageOS.
Comands:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash oem oem.img
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash boot boot.img
fastboot oem lock
I have successfully been able to Lock the Bootloader and return to stock rom like a new Moto Z2 Play ,
Thanks to xda member Kacike27 , i dowloaded the Firmware he has posted the link for, and followed all the steps in his thread
https://forum.xda-developers.com/z2-play/how-to/close-bootloader-lineageos-losing-imei-t3769479
Great news!!!
U can download the new ANDROID PIE stock (working on at&t Mexico, Movistar Mexico, Retail, and many others) firmware from here:
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Hit the thx button
Khanov said:
Great news!!!
U can download the new ANDROID PIE stock (working on at&t Mexico, Movistar Mexico, Retail, and many others) firmware from here: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Hit the thx button
Click to expand...
Click to collapse
Work with locked bootloader?
Yeah, totally
TheDemonOfSky said:
Work with locked bootloader?
Click to expand...
Click to collapse
Enviado desde mi motorola one mediante Tapatalk
Khanov said:
Yeah, totally
Enviado desde mi motorola one mediante Tapatalk
Click to expand...
Click to collapse
What's program I can use to flash?
Fastboot vía CMD
TheDemonOfSky said:
What's program I can use to flash?
Click to expand...
Click to collapse
Enviado desde mi motorola one mediante Tapatalk
deleted
little tutorial on flashing this? I know how to use fastboot, used it a bit on my ex addison..
but there are few new files and I wouldn't like to brick a new phone
This is aint working on my Motorola ONE ATT Mx, once it finishes to flash the following message appears "Your device has failed verification" and it wont boot my Variant is XT1941-5, you need to flash back oreo 8.1 stock rom to boot again, a more reliable source is needed or a proper guide
This Work in XT1941-5 ?
Zacknvmnd said:
This Work in XT1941-5 ?
Click to expand...
Click to collapse
I got that one and it doesn't
Darkzide86 said:
I got that one and it doesn't
Click to expand...
Click to collapse
My device die i have brick, u can help me?
Zacknvmnd said:
My device die i have brick, u can help me?
Click to expand...
Click to collapse
I reflashed this one
https://mirrors.lolinet.com/firmware/moto/deen/official/IUSMXLA/
Hello, in Mexico is already coming Android Pie via OTA.
new link, is the brazil version, If you like to flash it
https://mirrors.lolinet.com/firmware/moto/deen/official/RETBR/
Darkzide86 said:
This is aint working on my Motorola ONE ATT Mx, once it finishes to flash the following message appears "Your device has failed verification" and it wont boot my Variant is XT1941-5, you need to flash back oreo 8.1 stock rom to boot again, a more reliable source is needed or a proper guide
Click to expand...
Click to collapse
you managed to start your computer, mine is in paperweight status, all for not waiting for the official update and flashing, help my team is a paperweight: eek:
Zacknvmnd said:
My device die i have brick, u can help me?
Click to expand...
Click to collapse
Pudiste recuperarlo, estoy en la misma problemática que usted, alguien puede ayudarnos ?
Released officially on italian market
Inviato dal mio XT1805 utilizzando Tapatalk
Hi for flash with wipe use this script, i test in my device and all work fine remember use with the last version of binares of fastboot by Google.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
PHP:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash boot_a boot.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot erase userdata
fastboot erase DDR
fastboot flash logo_a logo.bin
fastboot oem fb_mode_clear
fastboot reboot
Seyaru said:
Hi for flash with wipe use this script, i test in my device and all work fine remember use with the last version of binares of fastboot by Google.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
PHP:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash boot_a boot.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot erase userdata
fastboot erase DDR
fastboot flash logo_a logo.bin
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Hi, thanks for the contribution, I'll be coming home, espeor work and upload a screen image of the status of my device.
tell me what version of firmware did you use?
guger10 said:
Hi, thanks for the contribution, I'll be coming home, espeor work and upload a screen image of the status of my device.
tell me what version of firmware did you use?
Click to expand...
Click to collapse
Stock BR Pie
Hey everyone
My motorola one deen xt 1941-4 64GB PVT1 is not starting up
its just giving error Start Up Failed
Its just starting up in bootloader mode with locked oem and AP Fastboot Flash Mode (Secure).
Not going into recovery
not going into factory mode
Can you plz help me out to solve it plz
nashi_jee said:
Hey everyone
My motorola one deen xt 1941-4 64GB PVT1 is not starting up
its just giving error Start Up Failed
Its just starting up in bootloader mode with locked oem and AP Fastboot Flash Mode (Secure).
Not going into recovery
not going into factory mode
Can you plz help me out to solve it plz
Click to expand...
Click to collapse
Are you familiar with flashing moto firmware with fastboot.exe ?
Did it install an update recently?
Sent from my mata using XDA Labs
sd_shadow said:
Are you familiar with flashing moto firmware with fastboot.exe ?
Did it install an update recently?
Click to expand...
Click to collapse
Not much familiar but know some basics.
No it did not install any update.
My wife just powered it off during a call and when tried to turn it on it showed up with the message
I have tried to unlock bootloader but it requires developer option to be turned on.
Simply I can follow the instructions if you provide some.
And thanks for reply buddy
nashi_jee said:
Not much familiar but know some basics.
No it did not install any update.
My wife just powered it off during a call and when tried to turn it on it showed up with the message
I have tried to unlock bootloader but it requires developer option to be turned on.
Simply I can follow the instructions if you provide some.
And thanks for reply buddy
Click to expand...
Click to collapse
I would start with
Motorola smart assistant
It has a recovery option
There's a link in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my mata using XDA Labs
sd_shadow said:
I would start with
Motorola smart assistant
It has a recovery option
There's a link in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Click to expand...
Click to collapse
I have already tried this LMSA. It shows its model in recovery option i.e xt1941-4. But when I try to recover it ends up with MODEL NOT SUPPORTED
Waiting for reply / solution from any expert please.
nashi_jee said:
Waiting for reply / solution from any expert please.
Click to expand...
Click to collapse
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Another option would be trying to switch a/b system
Hoping that the non active partition is bootable.
Some instructions about that in my adb thread.
Sent from my mata using XDA Labs
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Switching active system partition is the easiest
If the bootloader will even allow the commands
It may not.
Sent from my mata using XDA Labs
Thanx to help me.
But I am confused.
Can you plz help me through team viewer or wonething like that if you dont mind
sd_shadow said:
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem_a NON-HLOS.bin
fastboot flash fsg_a fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp_a adspso.bin
fastboot flash logo_a logo.bin
fastboot flash boot_a boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash system_a system.img_sparsechunk.0
fastboot flash system_a system.img_sparsechunk.1
fastboot flash system_a system.img_sparsechunk.2
fastboot flash system_a system.img_sparsechunk.3
fastboot flash system_a system.img_sparsechunk.4
fastboot flash system_a system.img_sparsechunk.5
fastboot flash system_a system.img_sparsechunk.6
fastboot flash system_a system.img_sparsechunk.7
fastboot flash system_a system.img_sparsechunk.8
fastboot flash system_a system.img_sparsechunk.9
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor_a vendor.img_sparsechunk.0
fastboot flash vendor_a vendor.img_sparsechunk.1
fastboot flash oem_a oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Another option would be trying to switch a/b system
Hoping that the non active partition is bootable.
Some instructions about that in my adb thread.
Sent from my mata using XDA Labs
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Switching active system partition is the easiest
If the bootloader will even allow the commands
It may not.
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
I tried RSD Lite last night and successfully flashed the firmware but the problem still exists.
Everything gone good then why its not back into life?
One more thing I am thinking that the firmware folder does not contain any recovery file. Is it normal?
nashi_jee said:
You could flash firmware but if you don't flash the correct firmware for the software channel on the device it won't work.
Usually the software channel is the named for the carrier or region.
https://mirrors.lolinet.com/firmware/moto/deen/official/
You can flash the firmware with fastboot.exe
Setting up and Using adb.exe and fastboit.exe https://forum.xda-developers.com/android/general/index-links-setting-using-adb-fastboot-t3495167
The flashing commands should be
I tried RSD Lite last night and successfully flashed the firmware but the problem still exists.
Everything gone good then why its not back into life?
One more thing I am thinking that the firmware folder does not contain any recovery file. Is it normal?
Click to expand...
Click to collapse
Recovery is part of the boot.img now
Sent from my mata using XDA Labs
sd_shadow said:
Recovery is part of the boot.img now
Click to expand...
Click to collapse
It finishes successfully but again comes up with same error
i face same problem you solve that problem or still not?
Same problem
Hey guys. Wait please I'm working for your blank flash for your device . Recently I worked two models before . Check this coming soon I'll add your model.
https://forum.xda-developers.com/one-vision/how-to/start-failed-motorola-one-macro-t4082275/amp/
still No luck mate.
yehison said:
Hey guys. Wait please I'm working for your blank flash for your device . Recently I worked two models before . Check this coming soon I'll add your model.
https://forum.xda-developers.com/one-vision/how-to/start-failed-motorola-one-macro-t4082275/amp/
Click to expand...
Click to collapse
Should I try this method for Motorola XT1941-4?