Related
Hi All:
This is my first post in this forum.
I have been using Liquid Smooth JB 2.1 RC2 ROM since Feb 2013 and I really love it. Recently the 2.2 Official version was released and I flashed the ROM accordingly along with GApps.
Unfortunately, when someone calls my phone, nothing happens, no caller display or change in display or not even a ring! The calling party state that they hear the ringing. When I tested it by calling my own phone, I saw that I could hear the ringing from the phone I was dialing from but on my S3, there was no response what so ever...to better explain it, the phone is like its on standby...even when I wake up the screen, I only see the main screen and nothing else..its like no one is actually calling.
When I tried making calls from my S3, the calls went through ok but I could not hang up! I have my phone programmed to end the call using the Power Button, but I still can't hang up. I tried this multiple times but nothing fixed it. I reinstalled the 2.2 version 3 times but no joy. I followed the installation procedure word to word! Out of despiration, I went back to 2.1 RC2 and the phone stated working again..but only this time, it seems to crash a lot. I assume its because of the insane chip that S3's come with.
I have searched the forums high and low but there is not a single thread discussing this issue! Please Help!
Device: S3 i9300 International
Kernel: 3.0.31-CM-gcea4b18
Baseband Version: i9300DDELK1
Here is some advise for success on Xda. Search and read as much as possible. Not only did you post this in the genreal section where as all questions go in the Questions and answers section (btw there is a sticky that states this). The galaxy S3 has its own forum. I moved the thread there to help you out.
mark manning said:
Here is some advise for success on Xda. Search and read as much as possible. Not only did you post this in the genreal section where as all questions go in the Questions and answers section (btw there is a sticky that states this). The galaxy S3 has its own forum. I moved the thread there to help you out.
Click to expand...
Click to collapse
Hi Mark, thanks a lot mate! Appreciate the help. I have been on XDA for the last 15 days trying to look for an answer with S3 and the Liquid Smooth 2.2 official but no luck so far so out of desperation, I posted on here.
Anyways, apologies and thanks for the help.
Liquidsmooth 2.5 V issues
Hi All: As I am a junior member and am not allowed to post questions or issues I am having on the developer forum and hence am forced to post here.
I just updated my phone to Liquidsmooth v2.5 and its working pretty good, decent battery life and all that. However, there is one issue that is bugging me and I will try my best to explain it as much as I can.
When I am on the phone for about 3 minutes and over and if I get a second call, the display shows nothing. I have to press the Home key in order to wake the screen up to view who the caller. is. However, if I am on a call and I get a another within first 1 min or 2, the second caller is displayed on the screen.
Its definitely an issues, which I had with Liquidsmooth v2.1 as well. The screen won't wake up when I am on the phone to show me who the second caller is. I did make sure that the camera was't covered and yet it does the same.
If someone has any suggestions, please let me know. Thanks.
Raj
Hey everyone!
I couple of days ago I bought this phone from alibaba.com because I got a good price for it and the specs where decent, atleast for the price.
So far, it's a great phone. It has one bug though which is that sometimes, not always, the volume will go from mute to FULL and force itself to stay there. Like if you were to try and lower the volume, either via the phone menu, or with the side buttons, it would go back up.
This is kind anoying, and these spasms lasts for maximum 30 seconds, ie after 30 seconds you can normally turn the volume down.
But overall, good phone, would've been better if it wasnt doing that. Anyways, to my question.
I want to install Cyanogen mod on this phone. That is the reason why I made this thread, to ask for help/informationg regarding this process, wether its possible or not.
Here are some information I took from the "about phone" window;
Model Number: N3
Android Version: 4.3.0
Baseband Version: N3XXUAMDK
Kernel Version: 3.4.5-526212 [email protected]#1 tue aPR 23 23:00:57 kst 2013
Build number: N3_V1.0_V01_2013
SELinux Status: Enforcing
For specifications phonewise visit this link; turns out I cannot post links yet, but just google "No.1 N3" and their main page will pop out and there are the specs. (I have the 1gb version btw, on their page it costs 199 i think)
So, is this possible? I feel like if this is some kind of software failure, installing cyanogen/or any other rom might fix it.
Also, if it isnt going to fix it, I'd still want my phone to have cyanogen if possible.
Thanks in advance everyone!
issues
Just got this phone in the mail....looks identical to note 3 butttt ...it just isn't connecting to my mobile network. Very frustrating
Radio frequencies are correct etc. I'm on Telus network, I did get a connection for 2 mins and then gone.
On the manufactures website the specs indicate it comes with 4.2 but mine has 4.3. Wondering if the 4.3 is an issue.
The status bars are all grey with a red x above them. Any help would be awesome.
Thanks
Porting cyanogen-mod is possible, but just in the way, that almost nothing is impossible.
There is no cyanogen-mod porting so far for the 6589 phones, so you have to port every driver and everything by hand.
If i were you, i would try to flash the newest no1. n3 rom and look if it runs better.
At my No.1 S6 the last firmware solved always every annoying issues from the beginning.
I haven't found a thread about this phone here yet, so i cant give you a link to the latest firmware.
I saw that needrom.com has a rom for the No. 1 N3 so you who had a problem with your phone could maybe use that.
The volume error has seem to have dissapeared now for some strange reason?
Anyways I'm happy, but I still want more discussion about this phone. It's very good actually.
Thanks to the one posted here.
Also, I have no experience with android development so me porting cyanogen to this phone would not work at all
I think i will get my N3 next week.
Now i'm on my No.1 - S6...
Daemonarch2k said:
I think i will get my N3 next week.
Now i'm on my No.1 - S6...
Click to expand...
Click to collapse
From where did you buy it?
Also, please post here with your thoughts of the phone when you get it!
I buyed it second-hand, originally it came from tinydeal.
Is here a general discussion thread about this phone?
I got mine today, with firmware from 2013-11-18, and the camera-pictures are very noisy.
I guess this is an issue of the camera-drivers.
How are your photos?
So no.1 n3 dont have any custom rom
Daemonarch2k said:
Is here a general discussion thread about this phone?
I got mine today, with firmware from 2013-11-18, and the camera-pictures are very noisy.
I guess this is an issue of the camera-drivers.
How are your photos?
Click to expand...
Click to collapse
You have the white bootanimation or the black bootanimation?
My camera is good actually, cant complain on that.
I can give you all the files required to get the black boot animation "version", as I contacted customer service and they gave me the files.
extream87 said:
So no.1 n3 dont have any custom rom
Click to expand...
Click to collapse
Well, not yet atleast.
I think something will come up though sooner or later for the N3.
So, has anyone mixtured and experimented with this device?
Looking forward to hearing about your devices.
ImhereregardingmyN3 said:
You have the white bootanimation or the black bootanimation?
My camera is good actually, cant complain on that.
I can give you all the files required to get the black boot animation "version", as I contacted customer service and they gave me the files.
Click to expand...
Click to collapse
Thanks, i have the black bootanimation...
ImhereregardingmyN3 said:
You have the white bootanimation or the black bootanimation?
My camera is good actually, cant complain on that.
I can give you all the files required to get the black boot animation "version", as I contacted customer service and they gave me the files.
Click to expand...
Click to collapse
HI friend, you can give me the files please :S?
New to XDA with No.1 N3
Daemonarch2k said:
Is here a general discussion thread about this phone?
I got mine today, with firmware from 2013-11-18, and the camera-pictures are very noisy.
I guess this is an issue of the camera-drivers.
How are your photos?
Click to expand...
Click to collapse
ImhereregardingmyN3 said:
You have the white bootanimation or the black bootanimation?
My camera is good actually, cant complain on that.
I can give you all the files required to get the black boot animation "version", as I contacted customer service and they gave me the files.
Click to expand...
Click to collapse
American noob here. XDA Developer Boocy has some interesting info: http://forum.xda-developers.com/showthread.php?t=2438752
I received my No.1 N3 (the lower end $179 version as a matter of poverty) with the black boot animation. I believe it shipped with the updated ROM version on http://www.needrom.com/mobile/no-1-n3-2/ . I didn't use Boocy's backup and root tutorial because the cpu name has a T at the end of it (MTK6589T) and this is Android 4.3.0... it seems this phone needs some time on the market before developers see a demand for custom ROMs and we can get a straight forward fix for the GPS issues.
MTK Droid Tools reference in Boocy's post rooted the phone with the superuser button and SuperSu (after spending 8 hours researching why my MTKDroidTools didn't have a root button as seen in some image searches).
As a noob who spent the past 3 days on this phone, MTKDroidTools rooted the phone, but none of the GPS "fixes" or apps I've found work... and GPS is essential for my job. I've researched other custom ROMs but found nothing. I"m stuck at attempting to go back to stock with the needrom.com version posted above (because I didn't know enough about creating and flashing backups until it was too late).
Please link any relevant guides that have helped you in working with this phone. Keep on Google and let the rest of us know when this phone gets the attention it deserves from the developer community! (Thank you developers!)
---------- Post added at 01:42 AM ---------- Previous post was at 01:23 AM ----------
danielpinto8zz6 said:
HI friend, you can give me the files please :S?
Click to expand...
Click to collapse
I've installed the first version of the stock rom from needrom.com... black boot animation. I'm installing the update, which is what I believe came on the phone, black boot animation. I don't think I've seen the white or know where it came from. I'm not sure where the boot animation is stored on the phone, but I'm assuming it is attached to the ROM and when you flash you get a different animation?
I forgot to mention I have MTK Droid Root & Tools v2.5.2... and that in rooting by pressing the SuperUser button, I replaced the HBOOT screen with CWM (when you press volume up, power on, and home screen button during boot). Not sure how I did that, but I'm still trying to figure out where the kernel, rom, and recovery screen and recovery ROM are and which one gets replaced with what. Guides appreciated.
Sorry, if GPS is so important for you, i'm afraid to say you got the wrong phone.
No Fix will make a REAL good GPS, because the antennas are not really good.
With EPO and AGPS on, my phone gets a hot fix in less than 10sec, but navigating with maps is nearly impossible.
Finding satellites inside a car with chromed windows is more than hard.
Nearly all china-phones, but specially the clones have bad gps, and i think they always will.
Better buy a better phone than a cheap samsung galaxy grand or something.
jtsimaras said:
Just got this phone in the mail....looks identical to note 3 butttt ...it just isn't connecting to my mobile network. Very frustrating
Radio frequencies are correct etc. I'm on Telus network, I did get a connection for 2 mins and then gone.
On the manufactures website the specs indicate it comes with 4.2 but mine has 4.3. Wondering if the 4.3 is an issue.
The status bars are all grey with a red x above them. Any help would be awesome.
Thanks
Click to expand...
Click to collapse
Hello,
Were you able to solved the connection problem of your phone with telus? I had the same problem would you mind sharing the solution to this problem with me please? Thank you for your kind ness.
Telus Network in Canada - No.1 N3
Anyone using the same phone in Canada with Telus network please help. Mine was able to connect to Telus 3G network for an hour and then gone. If someone here know how to fix this problem I would appreciate your help. THank you.
hello help my no.1 n3 backup rom downloads link help my
morio005 said:
hello help my no.1 n3 backup rom downloads link help my
Click to expand...
Click to collapse
Needrom.com
Gesendet von meinem SM-N9006 mit Tapatalk
Hi I got my Oneplus 2 today, it was purchased from China and imported to India and hence had the color OS, hand to install Oxygen OS as Color OS does not have google on it.
The phone feels heavy, looks great and is quite comfortable to hold
Got my hands of Oxygen OS and just finished installing, one remark on the same unlike other phones where you need to install a custom recovery to file the zip, in Oxygen I could just boot into recovery and install the zip file which is a great thing for the novice users as they will not be required to install custom recovery.
So i installed the OS without any issue took 5 minutes booted up quickly signed up into google and the phone was set up
Observation the phone heated while installing the backup apps which was not heavy use as why installing apps and syncing gmail will send more updates on the heating issue as i start using the phone.
I configured the fingerprint scanner though it takes some time to scan the fingerprint however it unlocks pretty quicky though there is an issue reported by one of the earlier reviewers that it stops working after sometime will update on that as I use the phone
Camera has not been tested so will take some night pictures today and upload them.
Hello what about second sim.Is it working?How's the sound on headphones.Your remarks on screen quality too
Sent from my SM-N910G using XDA Premium 4 mobile app
I do not think the second sim will work on the chinese version however since the phone accepts nano sim and I dont have one I was not able to test it.
The scree quality is good and bright however will test it in sunlight and let you
It does not come with earphone will need to test it for third part ones
Congrats on your new device. Feel free to review it in the thread linked below:
http://forum.xda-developers.com/oneplus-2/general/oneplus-2-user-opinion-reviews-t3177299
Thread closed
Hi all,
I've just ordered the le max 2 from oppomart to Europe.
I've ordered the 4gb/32gb version.
I'm an owner of opo the last 2 years and flashed every single custom rom out there so, by no means I'm a newbie. That said, I can't get to understand some things with the le max 2, so I'll make a list and ask for your help and you guidance figuring this phone.
1. There are 3 version of the phone X820/1/9 or just one that was divided to regions?
2. Can I install any rom on any device?
3. Are there are different twrp and root to different rom versions?
4. I see teamspain are great the thing is I don't know Spanish where can I find a comprehensive guide from start for this phone?
Basically I want to root and debloat (preferably a debloated rom) with tbe latest update, the one that improves tbe fp reader.
Thanks for your replies.
I guess that the answers should be as follows:
1. Actually there are 3 versions of the phone with 3 different ROMs (not sure what can the difference be except of numbers X820 - cn, X821 - india, X829 - USA and most probably bands). I personally use X820 (chinese) and installed the USA & Indian ROMs on it without problems.
2. I believe that most of this question was answered in no 1. ROMs are different: USA doesn't allow you to have data on SIM2 for instance and only 3G, data is allowed only on SIM1; Indian is locking your Internal Data Partition, so you have to format the partition in order to install another ROM.
3. TWRP is a little different depending upon kernel as far as I understand. There is one for 5.6 kernel and another one for 5.6 kernel. The best as I can recommend is TWRP TeaMSpaiN for kernel 5.8. It is modified and you can install any ROM with it. I had some trouble with mounting /cust with the normal TWRP though.
4. TeaMSpain has the guides in English as far as I know. If you need any help in the ROM installation, you can ask, but it is pretty clearly explained in each thread.
Regards!
valy_cta said:
I guess that the answers should be as follows:
1. Actually there are 3 versions of the phone with 3 different ROMs (not sure what can the difference be except of numbers X820 - cn, X821 - india, X829 - USA and most probably bands). I personally use X820 (chinese) and installed the USA & Indian ROMs on it without problems.
2. I believe that most of this question was answered in no 1. ROMs are different: USA doesn't allow you to have data on SIM2 for instance and only 3G, data is allowed only on SIM1; Indian is locking your Internal Data Partition, so you have to format the partition in order to install another ROM.
3. TWRP is a little different depending upon kernel as far as I understand. There is one for 5.6 kernel and another one for 5.6 kernel. The best as I can recommend is TWRP TeaMSpaiN for kernel 5.8. It is modified and you can install any ROM with it. I had some trouble with mounting /cust with the normal TWRP though.
4. TeaMSpain has the guides in English as far as I know. If you need any help in the ROM installation, you can ask, but it is pretty clearly explained in each thread.
Regards!
Click to expand...
Click to collapse
Thank you for your reply.
One last question, can I lock the bootloader.
I'm buying the device and want to experiment with it but if I won't like it I want to lock the bootloader and send it back without losing the warranty
ItsNewDroid said:
Thank you for your reply.
One last question, can I lock the bootloader.
I'm buying the device and want to experiment with it but if I won't like it I want to lock the bootloader and send it back without losing the warranty
Click to expand...
Click to collapse
I don't know if you can lock the bootloader back, should be possible. Mine came with bootloader unlocked, bought it from honorbuy.
valy_cta said:
I don't know if you can lock the bootloader back, should be possible. Mine came with bootloader unlocked, bought it from honorbuy.
Click to expand...
Click to collapse
I bought from oppomart. I will check if the bootloader is unlocked. Hope it is, then problem solved
valy_cta said:
I don't know if you can lock the bootloader back, should be possible. Mine came with bootloader unlocked, bought it from honorbuy.
Click to expand...
Click to collapse
Hey there. I registered now on XDA and hope to get some help. I nave a problem with my Le Max2. If this is not the right place, you can tell me where to post and delete this comment.
However, I was saying... Basically my Le Max2's display becomes so pale and bleach. It happens randomly, at least that's what I think. The greys become nearly white and the blacks a lot lighter. This is very very annoying. It also looks so bad. I can "solve" (momentarily) this by covering the light sensor on top of the screen with my finger. By doing that, the colours return normal. That's all I know.
I am running Cuoco92's ROM. Thanks if you'll read this.
Kreez00 said:
Hey there. I registered now on XDA and hope to get some help. I nave a problem with my Le Max2. If this is not the right place, you can tell me where to post and delete this comment.
However, I was saying... Basically my Le Max2's display becomes so pale and bleach. It happens randomly, at least that's what I think. The greys become nearly white and the blacks a lot lighter. This is very very annoying. It also looks so bad. I can "solve" (momentarily) this by covering the light sensor on top of the screen with my finger. By doing that, the colours return normal. That's all I know.
I am running Cuoco92's ROM. Thanks if you'll read this.
Click to expand...
Click to collapse
Hi there, this is due to the brightness of light that comes into the sensor. If it's too bright outside, you'll see how the display becomes brighter and it also enhances the whites in some areas (some don't want this); as it becomes darker, the display gets darker and the unnecessary whites go off. As far as I know, there is nothing to be done regarding this as it's how the system works and you'll find it in stock EUI as well.
You might want to disable the ambient sensor, but I don't know how this will affect the device's performance and stability of the system. You can try it though and post results here.
valy_cta said:
Hi there, this is due to the brightness of light that comes into the sensor. If it's too bright outside, you'll see how the display becomes brighter and it also enhances the whites in some areas (some don't want this); as it becomes darker, the display gets darker and the unnecessary whites go off. As far as I know, there is nothing to be done regarding this as it's how the system works and you'll find it in stock EUI as well.
You might want to disable the ambient sensor, but I don't know how this will affect the device's performance and stability of the system. You can try it though and post results here.
Click to expand...
Click to collapse
Thank you for your reply. What I did was turning off the light (or ambient) sensor and the better screen visualization (don't know the proper name in english, i've set italian). What happens is, the brightness stays the same (it's manual now) but the colours keep getting paler. Maybe LeEco should add a control for this function. Or the problem may be solved by flashing another ROM (cm13)
Hi all,
I have a Samsung Galaxy Note 8 running Oreo 8.0 and have started to notice an odd issue when playing games.
Whenever I'm in a shooter game like PUBG Mobile, Bullet Force, Critical Ops etc. I encounter choppy touch input when trying to aim by swiping my finger around the screen; I would drag my finger and get no response for a split second then a 'jump' to where my finger is. Also, this seems to be more of an issue in the top half of the screen than the bottom depending on how I rotate the phone in landscape mode.
I tried reflashing the stock Oreo firmware with Odin and factory reset the device twice, all to no avail.
What else can I try to fix the problem or at least identify whether it is a hardware or software problem?
Thanks in advance.
hassan272 said:
Hi all,
I have a Samsung Galaxy Note 8 running Oreo 8.0..........
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following Q&A thread that's specific to your device and variants.
https://forum.xda-developers.com/showthread.php?t=3677038
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my SM-G900V device.