[EOL][OP5T][ROM+KERNEL] Unofficial LineageOS 14.1 with custom kernel [May 14, 2018] - OnePlus 5T ROMs, Kernels, Recoveries, & Other Dev

Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
This is an unofficial LineageOS 14.1 ROM for the OnePlus 5T. This ROM comes with a highly-customized kernel, as well as some other very custom modifications.
Custom kernels are not compatible with this ROM. I will NOT provide support if you install a custom kernel.
Changelogs for each update can be found in the 2nd post of this thread.
ROM features:
Based off latest LineageOS 14.1 sources (root access is NOT included)
OTA updates via built-in updater in Settings
Fast fingerprint unlock
sRGB, DCI-P3, and various other display color calibration modes and controls
Custom camera app featuring:
-Manual shutter speed control (1/5000th of a second up to 50 seconds)
-Manual ISO control
-Video HDR mode
-Antibanding control
-Exposure control
-Denoise control
-Face detection
-HDR
-Many other manual controls
Many other misc. performance and stability improvements under the hood
Kernel features:
Rebuilt from the ground up using the latest Nougat Snapdragon 835 base from Qualcomm (CAF)
Removed lots of excessive bloat (improves security and performance)
Improved stability (several bugs not listed here have been fixed)
WireGuard, a next generation secure VPN tunnel (more info)
DASH charge
Passes SafetyNet bootloader unlock check
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooth without destroying battery life)
Reduced display power consumption
Improved touchscreen processing latency
Improved audio jack detection
CPU underclocked to 1958 MHz by default (you can disable this; read the FAQ for more info)
Custom thermal control driver I wrote myself (features 9 thermal throttle steps; keeps the phone cool)
Westwood TCP congestion algorithm (enabled by default)
No placebo patches, features, or dangerous compiler "optimizations"
Many other misc. improvements not listed here
Source code:
Kernel (cm-14.1-sultan branch): https://github.com/sultanxda/android_kernel_oneplus_msm8998
Local manifest (contains the rest of the sources): https://github.com/sultanxda/android/blob/master/dumpling/cm-14.1/local_manifest.xml
Credits:
LineageOS and its contributors
CAF (aka Qualcomm)
zx2c4 (for WireGuard, providing project resources, working directly on development, and sending me stickers)
Open GApps
If your name should be here and it isn't, then make me use an iPhone 4s running iOS 9
Installation instructions (for first-time installation):
First, perform a backup of your existing setup, and then perform a clean install (wipe /data and /system; TWRP is recommended). Next, try flashing the ROM and see if it installs; if it installs without any issues then congratulations! Now just flash a Google apps package, Magisk if you want root access, and then reboot.
If you get an error when trying to install the ROM ("dumpling.verify_modem" error), then go to the Firmware link in the Downloads section and flash the firmware package. Once you flash the firmware zip file, you can install the ROM.
Installation instructions (for updating to a newer release):
If you are already running this ROM, then you can update to a newer version of the ROM via the built-in OTA updater or by simply dirty-flashing the new ROM build without wiping anything. HOWEVER, do NOT reinstall Google Apps after installing a new update.
Downloads:
Firmware: https://www.androidfilehost.com/?fid=818070582850490442
ROM:
Please read through the installation instructions before installing this for the first time.
Mirror 1: https://github.com/sultanxda/androi...-14.1-20180514-UNOFFICIAL-Sultan-dumpling.zip
Mirror 2: https://www.androidfilehost.com/?w=files&flid=246659&sort_by=date&sort_dir=DESC
Google Apps (required): Platform: "ARM64", Android: "7.1", Variant: "micro" or "nano" (I will not provide support if you install a different variant)
Magisk (if you want root access): https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Disable CPU underclock (optional): https://forum.xda-developers.com/devdb/project/dl/?id=28437
XDA:DevDB Information
LineageOS 14.1 with custom kernel, ROM for the OnePlus 5T
Contributors
Sultanxda, zx2c4
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Created 2018-02-05
Last Updated 2018-05-23

Changelog:
May 14, 2018:
ROM:
*Latest upstream LineageOS changes
Old changelogs:
March 28, 2018:
ROM:
*Latest upstream LineageOS changes
*Attempted to fix broken NFC when downgrading from Oreo
Kernel:
*Fixed previous build's attempt to reduce kernel power consumption (previous build didn't improve battery life; this build does)
March 21, 2018:
ROM:
*Latest upstream LineageOS changes
Kernel:
*Fixed time service crashing nonstop (this also caused high battery drain)
*Slightly reduced kernel power consumption (most of the kernel runs on a single, low-power CPU core now)
March 17, 2018:
ROM:
*Latest upstream LineageOS changes
Kernel:
*Updated to CAF LA.UM.5.8.r1-03300-8x98.0
*Rewrote alert slider driver (slightly improves alert slider responsiveness and fixes the alert slider mode not getting reapplied after a reboot)
*Fixed kernel wakelock statistics not showing up in apps like BetterBatteryStats and Wakelock Detector
March 11, 2018:
ROM:
*Latest upstream LineageOS changes
Kernel:
*Reverted to old battery driver (fixes battery percentage issues)
*Fixed battery not charging with some chargers or a computer's USB port
February 20, 2018:
ROM:
*Latest upstream LineageOS changes
Kernel:
*Fixed DASH charge issues introduced in the previous build
*Fixed incorrect battery percentage being reported in recovery
February 19, 2018:
ROM:
*Latest upstream LineageOS changes
*Camera: Fixed camera preview freeze when taking pictures with a manual ISO
*Added more volume steps for handset volume and media volume
*(from zx2c4) Camera shutter sounds are no longer forced in countries that require them
*(from zx2c4) Fixed missing 5 GHz WiFi hotspot option for some users
Kernel:
*Updated to CAF LA.UM.5.7.r1-11800-8x98.0
*Fixed USB tethering
*Fixed touchscreen gestures not working sometimes
*Rewrote battery driver for more accurate battery readings
February 5, 2018:
ROM:
*Initial release
Kernel:
*Initial release

FAQ:
1. Why did you underclock the CPU?
Answer: At the underclocked frequency, the amount of heat generated by the CPU is quite a bit less, so the CPU is throttled less often (leading to a better user experience), and battery life is better as well. The performance difference while underclocked is also not really noticeable unless you use a benchmark application.

@SynisterWolf (or any other mod) Could you please delete the other two threads? XDA is acting derpy right now, and it looks like two extra threads got created :/
These are the other two threads: https://forum.xda-developers.com/on...p5t-unofficial-lineageos-14-1-custom-t3745018
https://forum.xda-developers.com/on...p5t-unofficial-lineageos-14-1-custom-t3745017

Great to see you Sultan :good:

Welcome. :fingers-crossed::fingers-crossed::fingers-crossed:

is it encrypted or decrypted?

Robustuck said:
is it encrypted or decrypted?
Click to expand...
Click to collapse
Installation instructions do not say format data....

thx ,any known bugs?

Will try ASAP and report. Great to see you here...

@Sultanxda I guess you will build 15x only when it is stable

seems nfc doesn't work .

hmmzzz said:
thx ,any known bugs?
Click to expand...
Click to collapse
Not really. More or less everything should be pretty solid.
hmmzzz said:
seems nfc doesn't work .
Click to expand...
Click to collapse
Works fine for me. I can use Android Beam to transfer stuff between devices.
shafi31 said:
@Sultanxda I guess you will build 15x only when it is stable
Click to expand...
Click to collapse
And when I have a lot of free time

Oops I follow the instruction but I got forever bootanimation.
(I remember I had face this isssue with Mokee 7.1.2 ROM too.)
I never got this issue with 8.0+ ROMs. :fingers-crossed::fingers-crossed::fingers-crossed:

don't know why clean flash many times but nfc still wouldn't work.

hmmzzz said:
don't know why clean flash many times but nfc still wouldn't work.
Click to expand...
Click to collapse
Firmware u use?
Gapps?
Any Custom kernel?

shafi31 said:
Firmware u use?
Gapps?
Any Custom kernel?
Click to expand...
Click to collapse
use the firmware in the post
Clean flash
no gapps.
magisk installed

@Sultanxda but for oneplus 5 do not plan?

Is this rom unified with oneplus 5 ?

Anyone else get the following error? "This is for dumpling, your device is OnePlus 5T"

Related

Having difficulty encrypting Oneplus X

Hi everyone
I'm trying to set up encryption on my phone running CM13 nighties. I've had a number of problems so far.
The first few times I tries encrypting, it seemed like it would work and would ask for my pin upon boot. But afterwards it would show the boot animations again for hours on end.
So I reformatted the phone and flashed the latest nightly and TWRP.
Now when I try to encrypt the phone it will seem like it's going through the process then reboot, say the encryption was unsuccessful and I have to factory reset my phone.
Anyone having better luck? How can I get around this?
Sent from my ONE E1005 using Tapatalk
I have the same problem, too. Any suggestion?
I believe you need the CM13 from this thread and the revised TWRP in order for the encryption to work.
Sultanxda said:
This is an unofficial CM13.0 ROM based off of the stable branch instead of the nightly branch, with the main goal being stability with an overall good user experience. This ROM has many things in common with my OnePlus One ROM.
Custom kernels are not compatible with this ROM. I will NOT provide support if you install a custom kernel.
ROM features:
Based off latest generic CyanogenMod 13.0 stable sources (root access is NOT included)
OTA updates via built-in CMUpdater
Configurable multi-color notification LED
Custom camera app with several manual controls and high-speed video recording with audio
Custom camera HAL I made myself featuring:
-4K UHD and DCI video recording
-1440p video recording with the front-facing camera
-High-speed video recording with audio at 60 FPS and 120 FPS for 720p, and 60 FPS for 1080p
-Consistent 30 FPS video recording in all lighting conditions
-Intelligent anti-shake algorithm (significantly reduces motion blur when capturing photos)
-Faster autofocus in low lighting conditions
-No stuttering in camera viewfinder
-Improved photo quality
-Photo capture up to 4208x3120 resolution (instead of 4160x3120)
Many other misc. improvements under the hood
Kernel features:
Based off latest CAF Marshmallow kernel source from Qualcomm (LA.BF.1.1.3_rb1.13)
Removed lots of excessive bloat
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooth without destroying battery life)
CPU underclocked to 1958 MHz by default (you can disable this; see why I did this in the FAQ in the 3rd post)
Custom thermal control driver I wrote myself (features 8 thermal throttle steps; keeps the phone cool)
LCD KCAL by Savoca
Westwood TCP congestion algorithm (enabled by default)
F2FS support
NTFS support
No placebo patches, features, or compiler "optimizations"
Many other misc. improvements not listed here
Source code:
Kernel (cm-13.0-sultan branch): https://github.com/sultanxda/android_kernel_oneplus_onyx
Local manifest (contains the rest of the sources): https://github.com/sultanxda/android/blob/master/onyx/cm-13.0-stable/local_manifest.xml
Credits:
CyanogenMod and its contributors
CAF (aka Qualcomm)
myfluxi (awesome friend with lots of amazing contributions)
Open GApps
The people who first brought CM13.0 to the OnePlus X:
ashwin007
Grarak
MasterAwesome
h2o64
If your name should be here and it isn't, then make me use an iPhone 4 running iOS 8
Installation instructions (for first-time installation):
First, perform a backup of your existing setup, and then perform a clean install (wipe /data and /system; TWRP is recommended).
If you plan on using encryption with this ROM, then flash the custom TWRP build in the Downloads section below before flashing the ROM. This custom TWRP build is needed if you want to be able to access data encrypted using this ROM while booted into recovery. Otherwise, you will not be able to access your encrypted data while your phone is in recovery mode.
Then, flash the ROM, flash a Google apps package, SuperSU if you want root access(ONLY v2.65 OR HIGHER), and then reboot.
Installation instructions (for updating to a newer release):
If you are already running my CM13.0 ROM, then you can update to a newer version of the ROM via the built-in OTA updater or by simply dirty-flashing the new ROM build without wiping anything.HOWEVER, do NOT reinstall Google Apps after installing a new update.
Downloads:
TWRP (if you want to use encryption):http://forum.xda-developers.com/devdb/project/dl/?id=18841
ROM:
Please read through the installation instructions before installing this for the first time.
Mirror 1:http://forum.xda-developers.com/devdb/project/dl/?id=18990
Mirror 2:https://www.androidfilehost.com/?w=files&flid=56844&sort_by=date&sort_dir=DESC
Google Apps: Platform:"ARM", Android:"6.0", Variant:Choose "full" or smaller (do not use "stock" or "super"!)
SuperSU (if you want root access): http://forum.xda-developers.com/showthread.php?t=1538053
Disable CPU underclock: http://forum.xda-developers.com/devdb/project/dl/?id=18281
XDA:DevDB Information
CM13.0 with fancy 3.4.0 kernel, ROM for the OnePlus X
Contributors
Sultanxda
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-05-08
Last Updated 2016-06-25
Click to expand...
Click to collapse

[P600][n1awifi][ROM][7.1] Official LineageOS 14.1 - weekly

LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Screenshots and Videos
Screenshots
Click to expand...
Click to collapse
What works?
Working​Boot
Display/Brightness
Touchscreen
Audio
Wifi
S-Pen
Buttons/Lights
SDCard
USB Storage
GPS
Bluetooth
IR Blaster
Camera
DRM (L3)
SELinux Enforcing
Not working​MHL
Miracast
Not in the list? Report below
Click to expand...
Click to collapse
Other issues
(empty)
Click to expand...
Click to collapse
How to install
This ROM REQUIRES Lollipop bootloader. See this post to learn how to update your bootloader.
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Factory reset
4. Install ROM
5. Install Gapps
6. Reboot to system
You can skip factory resetting ("dirty flash") if you're upgrading from Official LineageOS to a newer Official build.
Click to expand...
Click to collapse
Downloads
Official LineageOS ROM: https://download.lineageos.org/n1awifi
Gapps: http://opengapps.org/ [Recommended: ARM 7.1 Pico or Nano]
Root: https://download.lineageos.org/extras
Exynos5420 team ROMs (UNOFFICIAL builds):
ROM: http://download.exynos5420.com/LineageOS-14.1/n1awifi/
Old downloads:
https://forum.xda-developers.com/devdb/project/?id=16957#downloads
Click to expand...
Click to collapse
Note: n1awifi is the same device as lt03wifi - the SM-P600
Thanks to
Without these people this ROM wouldn't exist:
Exynos5420 dev team ( @deadman96385 @thompatry @ZakooZ @Orion116 @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588 )
@ShevT - For his work on the P601 (huge contributor to our current device tree)
@Raymanfx - First to bring CM to this device
Click to expand...
Click to collapse
Changelog
Current changelogs: https://download.lineageos.org/n1awifi/changes/
Old changelogs:
Code:
20170302
Fix bug where SetupWizard didn't have buttons
Lockscreen rotation setting added to Display->Rotation settings
20170222
Go official!
Fix video rescaling issue
SEPolicy fixups
Add noise suppression blobs
Enforce SELinux
20170130
Automatic screen brightness no longer enabled by default - zakooz
Enable our cache partition - zakooz
fstab: Mark cache, userdata as formattable - deadman96385
sepolicy: Update policies for media - cryptomilk + deadman96385
Doze fixups and tweaks - BadDaemon + deadman96385 + tincho5588 + zwliew
power: Use our kernel nodes - zakooz
Use NV21 color format instead of nv12tiled - tincho5588
ramdisk: fix s5p-smem ownership - tincho5588
Config: fix audio_effects.conf - tincho5588 + deadman96385
AudioFX: build the package again - tincho5588
20170113
Security patch: 05 January 2017
Enable "Samsung Doze"
GPU: Allow user under/overclock
GPU: Allow user thermal throttling points
GPU: Allow user voltages
20170107
Updated to LineageOS
Fixed microphone (Credit to @thompatry)
Fixed DRM
20161226
Update to final CyanogenMod sources (RIP CM)
Update to Android 7.1.1
December 2016 Security patch
Enable lockscreen rotation
Fix issue where the system was using the wrong audio_effects.conf
Enable advanced low power audio
Include Deathly Aduitor in installation
Increase maximum allowed charging current
No longer using haxes to avoid qualcomm telephony code
Update to 3.4.113 (from 3.4.112)
Update IR driver to samsung LL
Deathly Aduitor no longer complains about outdated kernel
Update Sound effect libs from T705XXU1ANF8 (Samsung MM)
Update mobicore from T705XXU1ANF8 (Samsung MM)
20161201
Major restructure and reorganization (now using exynos5420-common)
Updated audio configuration to official lollipop
Fixed offline charging
Updated audio blobs to official lollipop (kitkat bootloader has no problem with this)
Enabled US 5GHz wifi bands
Updated everything except for GPU driver to samsung's official Marshmallow sources (From klimtlte)
Allow apps to see and control:
USB charging currents
S-Pen Power Saving Mode (turn off S-Pen detection if it is inserted)
All the CPU thermal throttling points
S-Pen booster (increase CPU frequency when the S-Pen touches the screen)
Touchscreen booster (increase CPU frequency when a finger touches the screen)
Capacitive button booster (increase CPU frequency when a finger touches the buttons)
20161113
Fixed bug where buttons would light up even if lights were disabled in settings
Fixed bug where software buttons were enabled by default and restored option to disable them in Settings->Buttons
Camera fully working without crashes
Android security patch: 5 November 2016
20161107
Updated to CM14.1 (Android 7.1)
Fixed camera (but it's quite unstable)
20161030
Fixed battery stand-by problem introduced in previous build
Fixed HD video playback
Audio should crackle less
Now including Cyanogenmod Setup Wizard
Fixed possible system hang and reboot on first-boot
Enabled freeform windows
Improved system UI smoothness
Improved button lights HAL
Enabled strong stack protection
20161008
IR Blaster fixed? I can't test this because my IR emitter is faulty
Disabled doze - our device doesn't properly support this and it will actually decrease battery life
Updated default CPU governor and I/O scheduler configuration - battery life should be vastly improved if you weren't use custom CPU governor settings
Updated and enabled sdcardfs - Testing, storage should work better though
Many clean-ups in the device configuration
Removed system dependency on qualcomm ext-telephony (currently a mess on wifi-only-non-qualcomm devices)
Builds are about 50mb smaller (first boot is longer though) (give me feedback on what you prefer!)
Security patch - October 5, 2016
20160925
Fixed Bluetooth
Fixed Flashlight (and camera preview)
Fixed Settings app crash
Small fixes to RIL (lack of) and WiFi
20160916
Fixed GPS
20160915
Fixed audio
Fixed video rendering
Security patch - September 6, 2016
20160908
Initial release
Click to expand...
Click to collapse
Source code
Device: https://github.com/LineageOS/android_device_samsung_n1awifi
Kernel: https://github.com/LineageOS/android_kernel_samsung_exynos5420
Exynos5420 team: https://github.com/exynos5420
Click to expand...
Click to collapse
XDA:DevDB Information
SM-P600 LineageOS14.1 Official, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ZakooZ, https://github.com/exynos5420
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Stable
Created 2016-09-08
Last Updated 2017-06-22
FAQ
Before using the ROM:
Q. Can I have an ETA for the next build?
A. This ROM is scheduled to build every Thursday at 8 AM GMT. The download becomes available 1 to 5 hours later. If the build fails then you have to wait until the week after.
Q. Does this ROM support custom kernels?
A. No. You can still use them but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them.
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports while using it as Xposed can cause a lot of bugs.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available for nougat, however when it is ready you will need to use the version arm sdk 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post..
Q. What TWRP versions are supported?
A. ShevT's. Check out this thread for the TWRP download.
Q. Can the builds be dirty flashed over each other?
A. Yes if you're on Official builds.
Q. How do I dirty flash builds on top of old (working) ones?
A. Flash the ROM zip only (no gapps, don't wipe data).
Q. Will this work on Kitkat bootloader?
A. Read the install instructions.
Using the ROM:
Q. How do I enable software buttons?
A. Settings->Buttons.
Q. How do I change my Menu button to a Recents/AppSwitcher button?
A. Settings->Buttons.
Q. Do I need to provide a log if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a log.
Q. How do I get a logcat, and what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control
GPU Voltage Control
GPU Governor Control
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Stogie87 said:
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Click to expand...
Click to collapse
It currently works on top of the CM13 device specific code so it's probably best to use KK bootloader. Making it compatible with LP bootloader is difficult and not a top priority at the moment
The Rom is working in lp Bootloader, unfortunately not so well. Where can I get the kitkat Bootloader?
The Google App is not working for me
wulkanat said:
The Google App is not working for me
Click to expand...
Click to collapse
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
ZakooZ said:
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
Click to expand...
Click to collapse
Wow, the Rom is now very smooth, only with the standard gapps there are many fc and you cant sign in a google account.
Great work so far, excited for the stable build! No crash on gapps for me , everything felt pretty quick for an early build.
How about for note n8010
Plz
shukenmg said:
How about for note n8010
Plz
Click to expand...
Click to collapse
The new Note 10.1 is completly different from the Old one, so you are in the wrong thread. Don't expect too much, the n8000 is a very Old device.
New build
cm-14.0-20160915-UNOFFICIAL-n1awifi.zip
Fixed:
Audio
Video rendering (in Youtube and such)
Settings app now has cyanogenmod stuff (don't expect the settings to work) (root works)
New build
cm-14.0-20160916-UNOFFICIAL-n1awifi.zip
Fixed:
GPS (with help from @deadman96385)
Links are dead?
Edit, nevermind. Being dumb.
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
angus242 said:
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
Click to expand...
Click to collapse
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
ZakooZ said:
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
Click to expand...
Click to collapse
No problems. I appreciate all the work. I'm just reporting what I've found. Ya never know what might fall through the cracks. :good:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
kryzeK said:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
Click to expand...
Click to collapse
Should work on P601, but try at your own risk (RIL won't work for sure)

[ROM][7.1.2_r33] AOSPlusone 7.1 [SultanXDA's Camera HAL][OMS] | 25/08/17

Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Hi everyone, freshgiammi here. Some of you may know me from my previous work on maguro (Galaxy Nexus), while some others may not. Here I am, presenting you an AOSP build of Nougat for our Oneplus One.
What does it differ from other ROMs?
Simple. It's philosophy is staying close to stock. Even closer that OmniROM. Closer to AOSP than AOSP itself.
Jokes apart, AOSP is the true philosophy, with a few tweaks to make it feel snappier but not too much intrusive changes.
HOW STABLE IT IS
Rock steady.
This ROM is designed with two things in mind: Security and Stability.
Everything is tested for multiple days (both from me, and from private testers) to be sure nothing lets the final user with instabilities. This makes the ROM stable and reliable, not making it go into full retard when you need it most.
And since this is AOSP based, with an AOSP philosophy in mind, remember that any feature that is not included in the official source code won't be added.
Beware. Since we have no N official builds, issues are to be expected. Devs are working hard to fix them as they get spotted, but some bugs only appear to certain users or under certain conditions. Because of that, if you encounter an issue please let me know.
Tag me in a reply, attaching a logcat/dmesg (last_kmsg if your phone reboots) with the steps to replicate and a short description of the problem. That way I can fix it faster.
WHAT DOES THIS ROM OFFERS, MORE THAN AOSP?
Well, there's some neat stuff aside from AOSP that's included here.
-SultanXDA's Camera HAL with Stagefright Hardening
-Night Light and Storage Manager (from Google Pixel)
-SELinux Enforcing
-F2FS Support (beware, you need to format to F2FS with TWRP 2.8.6.0 as 3.0.2.0 has issues with F2FS formatting.)
-Substratum is available! Go theme your device as you like it!
More? You tell me!
DOWNLOADS
Lastest Build: AOSPlusone_bacon_250817 FINAL RELEASE
Gapps: OpenGapps
Sources up at my Github!
Feel free to clone and create your own rom. Just make sure to prevent authorship and pull requests if you fix something!
Changelog is on #2, while FAQs and extra ZIPs are on #3!
XDA:DevDB Information
AOSPlusone, ROM for the OnePlus One
Contributors
freshgiammi
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Created 2016-10-11
Last Updated 2017-08-25
Reserved. (CHANGELOG)
14 Jun. 2017 -> 25 Aug. 2017
Code:
[B]ROM: Updated to 7.1.2_r33[/B]
HAL: Upstreamed code to match Sultanxda's sources
+ Something that I don't remember but hey everything works well
21 Mar. 2017 -> 14 Jun. 2017
Code:
[B]ROM: Updated to 7.1.2_r11[/B]
ROM: Updated Substratum and Interfacer to lastest versions
[B]Kernel: Updated to 3.4.113[/B]
Kernel: Updated to match lastest kernel/common source from Android (3.4 is now deprecated)
Kernel: Upstream patches from LOS-14.1
[B]Kernel: Camera-drivers fixups from CAF[/B]
[B]HAL: Upstreamed code to improve stability
HAL: Fixed overexposure when taking picture with in good lightning conditions.
HAL: Fixed zooming in/out during video recording on Instagram/Snapchat[/B]
HAL: Merged patches from SultanXDA
[B]Vendor: Updated WDM libraries to match bullhead 7.1.1 ones[/B]
Vendor: Shimmed GraphicBuffer for camera libraries
[B]Snap: Merged upstream patches from LOS-14.1[/B]
Snap: Removed touch-to-screenshot during video recording
Snap: Fixed ZSL not re-enabling after disabling HDR
Snap: Added back 1440p resolution for videos
Previous Changelogs:
05 Feb. 2017 -> 21 Mar. 2017
Code:
[B]ROM: Updated to 7.1.1_r28[/B]
[B]ROM: Fixed Torch QS not working between reboots[/B]
[B]ROM: Substratum is now rootless[/B]
ROM: Substratum App is now bundled within the ROM
[B]HAL: Merged lastest patches from SultanXDA[/B]
[B]HAL: Moved nativehandle logic from CameraServer to HAL[/B]
Snap: Rebased Snap on CM14.1 sources
22 Jan. 2017 -> 05 Feb. 2017
Code:
[B][B]ROM[/B]: enabled F2FS support[/B]
ROM: Removed leftovers from Camera2
ROM: Re-enabled textiles check (Textiles are not globally allowed anymore)
[B]ROM: Enabled backuptool (thanks to @mandaman2k)
ROM: Fixed ringtone and notifications not being set (thanks to @medic)[/B]
ROM: Fixed qti.tetherservice crashing at startup
[B]ROM: Merged some security patches on hardware/qcom/media-caf[/B]
[B]Kernel: Fixed fast-charging not working for some users[/B]
Kernel: Fixed MPDecision not turning off cores 2 and 3
[B]Kernel: Restored CONFIG_MACH_OPPO;.[/B] (This will probably make kernel more stable,
but can cause instabilities. Please report any reboots.)
[B]Kernel: Fixed NULLPointer (kernel panic) when watching WEBM videos or using Google Fit.[/B]
Kernel: Merged the latest patches from LOS
[B]Snap: Fixed crash when resuming a video paused during recording[/B]
Snap/CameraHAL: Merged lastest patches from Sultanxda.
16 Jan. 2017 -> 22 Jan. 2017
Code:
[B]Adapted Camera HAL to work with the new stagefright hardening![/B]
[B]SELinux is now enforcing![/B]
[B]*maybe*[/B] Fixed HW Encryption (Need confirms)
[B]Fixed most of HFR/HSR;[/B] Everything works besides [email protected] and [email protected]
[B]Fixed Ambient Display
Fixed audio misbehaving with AUX cords (>3 pins jack)[/B]
11 Jan. 2017 -> 16 Jan. 2017
Code:
[B]Replaced Camera2 with Snap: Enjoy all the functionalities of Sultan’s HAL![/B]
[B]Fixed HSR; Slow-Mo isn’t working yet.[/B]
Updated Camera Capabilities for a better HAL compatibility and features
[B]Updated Display-CAF with newer commits to fix the Split Screen issue[/B]
Fine tuned RT Scheduler priorities
[B]Enabled prefhint: (Layers are rendered faster now, resulting in a smoother experience)[/B]
Enabled “Moves” in Settings
[B]Fixed Face Unlock (Trusted Face)[/B]
09 Jan. 2017 -> 11 Jan. 2017
Code:
Changed kernel name for conformity (from -cyanogenmod to -bacon)
[B]Fixed USB tethering not working[/B]
Replaced Launcher2 with Launcher3 (Materialized version)
25 Nov. 2016 -> 09 Jan. 2017
Code:
Updated to 7.1.1_r13 (5 Jan. Security Patchset)
[B]ADDED SULTANXDA’S CAMERA HAL! Enjoy that sweet camera optimization
Enabled HSR (High speed recording). Slow-mo doesn’t work yet.[/B]
Added back Substratum, with improved functionalities and customization.
Updated bionic libraries to load shims correctly
[B]Enabled Night Mode
Enabled Storage Manager[/B]
Under-the-hood device optimization
05 Nov. 2016 -> 25. Nov 2016
Code:
[B]Updated to 7.0.0_r21 (5 Nov. Security Patchset)[/B]
Removed Music app
Removed Browser2 (WebView Shell) app
[B]Added Chromium [/B]
Updated audio: AOSPlusone now uses Google Nexus’s audio files.
[B]ENABLED MULTIROM COMPATIBILITY[/B]
[B]Updated Adreno libs to LA.BF.1.1.3_rb1.12 (from Onyx)[/B]
Updated Kernel to match CM-14.1 sources
[B]Updated Substratum to OMS7 [/B]
Added reboot back to Power Menu
[B]Cleaned frameworks/av patchsets: restored some code from Nougat to improve security.[/B]
Enabled init.d/addon.d support
A bunch of other misc fixes
09 Oct. 2016 -> 05 Nov. 2016
Code:
[B]05 Nov. 2016[/B]
Added On-Screen NavBar and HW Keys customization (Settings -> Buttons)
Fixed vulnerability for Dirty COW exploit
Android 7.0.0_r14
Sync’d Kernel with CM14.1 sources
Fixed Bluetooth MAC
Enabled SystemUI tuner hidden options
Fixed Snapchat with on-screen buttons
Added Swipe Libs for AOSP Keyboard
Added Nexus/Pixel Bootanimation
Updated Adreno Blobs to lastest source (HTC M8 MRA58K Update)
Fixed Gapps F/C after first flashing
Added SuperSU to settings (You still need to flash it)
Updated Substratum
Reserved (FAQ)
Q: Plz add feature "X"
No. Just no. If it isn't in AOSP, it won't be added. Please stop asking. If you want themes there's substratum, for anything else XDA is full of mods and stuff. Just use the search button.
You can find more stuff in the "Themes and Apps" section.
Q: This thing is broken, please fix.
Please do not report bugs and issues this way. Attach to your message a log (dmesg or logcat, last_kmsg if it reboots) and if you can, the steps to replicate the issue. This way you help the dev track down bugs quicker.
Please don't report if you're on a different kernel or have mods installed.
Q: I've fixed stuff, how can I help?
Cool! Just submit a pull request on my repo or contact me via Hangouts.
Another Nougat rom, downloading right now, thanks!
Just a question: Is it compatible with multirom?
mustang_ssc said:
Another Nougat rom, downloading right now, thanks!
Just a question: Is it compatible with multirom?
Click to expand...
Click to collapse
Haven't tested yet, as I don't have MultiROM. But it should work just fine, if you apply the same modifications as the ones on Updateing's post.
Wow great concept! Everything I ever wanted from a ROM AOSP + Substratum. Nothing else
Hope you can enable SE-Linux soon
works theme ? some screenshots
Awesome! This is everything I wanted from a rom. Clean, with very minimal system level modifications.
beatbrot said:
Wow great concept! Everything I ever wanted from a ROM AOSP + Substratum. Nothing else
Hope you can enable SE-Linux soon
Click to expand...
Click to collapse
That'll take time, but we all hope to have that soon. I'm just not very good at writing SELinux policies haha
SirSoviet said:
Awesome! This is everything I wanted from a rom. Clean, with very minimal system level modifications.
Click to expand...
Click to collapse
I hope I can hit where OxygenOS didn't...
EDIT: Gah I forgot to add Substratum's App! But masquerade is installed, so you can get the app from the play store in the meanwhile, i'll make sure to add it in the next build.
Does this use AOSP's original camera blobs or Sultan's modified ones?
Spider-Vice said:
Does this use AOSP's original camera blobs or Sultan's modified ones?
Click to expand...
Click to collapse
CM. I've tried Sultan's, but I still need to work on his kernel.. A few incompatibilities.
Great!! Is it necessary a full wipe if I come from updateing's build?
capitanouncino said:
Great!! Is it necessary a full wipe if I come from updateing's build?
Click to expand...
Click to collapse
Shouldn't be needed, but I'd recommend a clean install. Make a backup first if you're going for a dirty flash.
And new Nougat for opo. I think this device is not gonna die for 2 years you guys are awesome. Thanks..
Any bugs encountered yet? Other than the issues stated in the OP
Sent from my OnePlus One using XDA Labs
C4SCA said:
Any bugs encountered yet? Other than the issues stated in the OP
Sent from my OnePlus One using XDA Labs
Click to expand...
Click to collapse
Currently setting it up..Pico TTS crashed once (and only once, so veeeerrry minor). I'll edit the post if i find more bugs
Edit 1: Whenever I tried to setup whatsapp without profile picture, it got into a endless loop. However, adding a picture and then removing it via settings worked just fine. (This is probably just a whatsapp-thing as I am also whatsapp-beta-tester)
beatbrot said:
Currently setting it up..Pico TTS crashed once (and only once, so veeeerrry minor). I'll edit the post if i find more bugs
Edit 1: Whenever I tried to setup whatsapp without profile picture, it got into a endless loop. However, adding a picture and then removing it via settings worked just fine. (This is probably just a whatsapp-thing as I am also whatsapp-beta-tester)
Click to expand...
Click to collapse
Pico TTS crashes on my side too. Gapps issue I guess.
WhatsApp works fine here. (Stable, not beta)
Shouldn't this be in android development?
rudolf895 said:
Shouldn't this be in android development?
Click to expand...
Click to collapse
+1
The GPS issue is solved then? Have been using the OPO as my primary driver, and it was near impossible to use ride hailing services and google maps with the last few builds.

[EOL][ROM][8.1.0] Unofficial ResurrectionRemix 6.2.1 with 3.4.113 Kernel [Nov 24]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Most of the introductions of this post are copied from YumeMichi's LineageOS 15.1 post.
Custom kernels are not compatible with this ROM. I will NOT provide support if you install a custom kernel.
ROM features:
Based off latest ResurrectionRemix Oreo sources (root access is NOT included)
Custom camera HAL made by Sultanxda featuring:
-4K UHD video recording
-High-speed video recording with audio at 60 FPS and 120 FPS for 720p, and 60 FPS for 1080p
-Consistent 30 FPS video recording in all lighting conditions
-Intelligent anti-shake algorithm (significantly reduces motion blur when capturing photos)
-Faster autofocus in low lighting conditions
-No stuttering in camera viewfinder
-Improved photo quality
-Photo capture up to 4208x3120 resolution (instead of 4160x3120)
Many other misc. improvements under the hood
Custom camera app not included. Maybe in a later version, the ROM has the default Snap as Camera App.
Kernel features
Based off latest CAF Marshmallow kernel source from Qualcomm (LA.BF.1.1.3_rb1.13)
Removed lots of excessive bloat
Dynamic CPU input boost driver I wrote myself (makes the phone feel smooth without destroying battery life)
CPU underclocked to 1958 MHz by default (you can disable this; see why I did this in the FAQ in the 3rd post)
Custom thermal control driver I wrote myself (features 8 thermal throttle steps; keeps the phone cool)
LCD KCAL by Savoca
Westwood TCP congestion algorithm (enabled by default)
exFAT support
NTFS support
No placebo patches, features, or compiler "optimizations"
Many other misc. improvements not listed here
Source code:
Kernel (lineage-16.0-sultan branch): https://github.com/YumeMichi/kernel_oneplus_onyx
Device tree: (oreo-sultan branch): https://github.com/aszorenyi/device_oneplus_onyx
Local manifest (contains the rest of the sources): https://github.com/aszorenyi/android
Special thanks:
@YumeMichi
@Sultanxda
LineageOS Team
ResurrectionRemix Team
Installation instructions (for first-time installation):
First, perform a backup of your existing setup, and then perform a clean install (wipe /data and /system; TWRP is recommended).
Then, flash the ROM, flash a Google apps package, Magisk if you want root access, and then reboot.
Installation instructions (for updating to a newer release):
If you are already running my RR 6.1 ROM, then you can update to a newer version of the ROM by simply dirty-flashing the new ROM build without wiping anything.
Downloads:
REQUIRES OXYGENOS 3.1.3/3.1.4 FIRMWARE!
ROM: https://github.com/aszorenyi/android/releases
Google Apps: https://opengapps.org
Magisk (if you want root access): https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Disable CPU underclock: https://forum.xda-developers.com/devdb/project/dl/?id=21084
FAQ:
What's the difference between this ROM and ResurrectionRemix?
They're almost the same thing, however I've added the following things:
I've fixed the Running Services Button's position on QS footer
Classic GPS Toggle
It acts like the GPS toggle in pre-KitKat versions. Basically if you have Network Location Enabled (Battery Saving) it will toggle Location between Battery Saving and High Accuracy, otherwise it will toggle between Off and Device Only.
Double tap to sleep on Lock screen (this was cherry picked from RR gerrit)
Option to hide Edit QS tiles button from QS footer (ported from Havoc-OS)
Alert Slider Customization (Notification modes, Flashlight, Brightness, Rotation and Ringer)
[*]Custom kernel? OSS camera?
Since this ROM is based on YumeMichi's LOS 15.1 device tree (and Sultan's cm-13.0), custom kernels are not compatible and I won't add OSS camera.
[*]Unlock cpu maxfreq?
Use the flashable zip provided by Sultanxda.
XDA:DevDB Information
ResurrectionRemix Oreo for OnePlus X, ROM for the OnePlus X
Contributors
hunfatal, YumeMichi, sultanxda
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: OxygenOS 3.1.3/OxygenOS 3.1.4
Based On: ResurrectionRemix
Version Information
Status: Stable
Stable Release Date: 2018-07-16
Created 2018-07-16
Last Updated 2019-09-16
Reserved
Changelog
2018-11-24
- Latest RR and LineageOS changes
- Latest kernel and device tree changes from YumeMichi
- November, 2018 security patches
2018-10-04
- Latest RR and LineageOS changes
- Latest kernel and device tree changes from YumeMichi
- October, 2018 security patches
2018-09-12
- Latest RR and LineageOS changes
- Latest device tree changes from YumeMichi
- September, 2018 security patches
2018-08-25
- Added more customization for alert slider (tri-state button)
Notification modes
Flashlight (on, off, blink)
Brightness (auto, brightest, darkest)
Rotation (auto, portrait, landscape)
Ringer (normal, vibrate, silent)
- Latest RR and LineageOS changes
- Latest device tree changes from YumeMichi
2018-08-12
- Latest RR and LineageOS changes
- August, 2018 security patches
2018-08-01
- Latest kernel and device tree changes from YumeMichi
- Latest RR and LineageOS changes
2018-07-18
- Fixed missing 4k option in camera recording
- Added/fixed missing hardware buttons customization
Reserved
Gonna try it now... RR+oreo :laugh:
RRemix= Awesome Rom...
Nice.
Wow, amazing
Screenshots?
Wow, amazing
micoeyes said:
Screenshots?
Click to expand...
Click to collapse
I will create some screenshots later today.
Sent from my OnePlus X using XDA Labs
Awesome... Onyx still alive with these ROMS...
Can anyone post screenshots and battery performance and other features..
Can it be used as a daily drive..???
LAKSHMI SAINATH said:
Can anyone post screenshots and battery performance and other features..
Can it be used as a daily drive..???
Click to expand...
Click to collapse
If you use los 15.1 and previous RR nougat rom then you won't be disappointed... Sultan kernel and RR customization... More than enough for me..
LAKSHMI SAINATH said:
Can anyone post screenshots and battery performance and other features..
Can it be used as a daily drive..???
Click to expand...
Click to collapse
I use this as my daily driver, tested 2 days before uploaded (just rebuild yesterday for latest RR changes). I will upload screenshots soon.
The device tree and the kernel is the same as YumeMichi's LineageOS 15.1 so battery performance and stability is probably the same (I didn't use that ROM so I don't have exact stats).
Edit: Screenshots uploaded.
hunfatal said:
I use this as my daily driver, tested 2 days before updloaded (just rebuild yesterday for latest RR changes). I will upgrade screenshots soon.
The device tree and the kernel is the same as YumeMichi's LineageOS 15.1 so battery performance and stability is probably the same (I didn't use that ROM so I don't have exact stats).
Click to expand...
Click to collapse
4k is missing in video... I flashed oos cam and when i enable 4k it crushes...
sagardakua said:
4k is missing in video... I flashed oos cam and when i enable 4k it crushes...
Click to expand...
Click to collapse
I will check it tomorrow. OOS camera not compatible.
I've uploaded some screenshots. I will upload a new build tomorrow to fix the missing 4k record option in camera.
Can you add the lock screen menu?
I would like to know does shutter sounds even turning off...
Coz most of Oreo roms i used is having that problem it makes me discomfort while clicking pics..
Hello
the RR Rome is great and good unfortunately I'm missing a shot. Missing assignment of Back, Home, Menu.
Or did I just not find this option?
greetings
Patjutzu said:
Hello
the RR Rome is great and good unfortunately I'm missing a shot. Missing assignment of Back, Home, Menu.
Or did I just not find this option?
greetings
Click to expand...
Click to collapse
Enable navbar in settings on navigation tab, and set its mode to smartbar. The default after turning it on is aosp.
Or if you meant the hardware buttons, as far as I can see it's not available yet, I will check this, maybe it's not available in current RR builds.
Sent from my OnePlus X using XDA Labs

[KERNEL] DxT [10&11] [HMP]

DxT Kernel ​
* Your warranty is now void.
* I am not responsible for bricked devices, strained relationships,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
This kernel is only for Payton
Features
1. Built with Clang 13 + Polly optimize
2. Merge Linux kernel and driver as soon as possible
3. DxT is CAF based and uptodate with latest tag
4. Fixed all compile-time warnings
Other Features
1. kcal, sound gain control
2. CPU OC using some sdm660 frequencies ,[Little cores = 2.0ghz ,Big cores = 2.5ghz]
3. Added & Updated LZ4 for ZRAM (Enabled by Default)
4. AnyKernel3 Installer Script
5.Compiled With Latest Proton CLANG 12
6. Exfat driver comes from arter97
7. Available I/O scheduler: bfq, cfq(default), deadline
8. Available TCP congestion algorithm: westwood(default)
9. Merge some optimization commits from Sultan
10. Kernel-level cpusets parameter optimization, optimize CPU core calls
11. Latest Wireguard driver
12. Adreno GPU boost
13. Some other visible and invisible optimizations...
Due to different moto action implementation on different roms i made two versions
* normal version support roms like superior,pixel experience,msm-xtended,ancient
* L version support roms like LOS,crdroid,havoc,derpest
DOWNLOAD
DxT v4.2
DxT v4.2-L
DxT UC
OTA SUPPORT:
# DxT Kernel FKM Manager Support
This kernel has FKM Manager support for autoflash updates directly from the app.For this to work you must import the configuration link in the section "Flasher" of the app:
Then you must select the option: "Import a kernel download configuration"
This are the URLs for the two versions,just copy,paste and save. (You must add and save one first and if you want both versions available add the other after)
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
Telegram Group
Use the app EXKM, FK Manager, kernel adiutor or smartpack to tweak the kernel!
special thanks to all contributators
attack11, nathanchance , joshuous , akhilnarang , flar2 , kerneltoast , GuaiYiHu , Pzqqt
if u like my works u can donate
[email protected] - upi
https://www.paypal.me/cool585 -paypal
XDA:DevDB Information
DxT kernel, Kernel for the Moto X4
Contributors
dhinesh_cool
Source Code: https://github.com/DhineshCool/Dxt_payton
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v4.2
Created 2020-06-22
Last Updated 2021-07-25
## DxT Changelogs ##
v4.2
*upstreamed to v4.276
*merged latest caf tags
*latest proton clang
*improved cpu frequency
*clean up rarely working freq
*improved cpu idle
*fixed battery drain on idle
*removed prlmk to prevent twrp crash
*more code cleanup fro stability
V4.1
*Fixed battery drain issue
*Fixed some bugs
v4.0
*upstreamed to v4.270
*latest proton clang
*fully rebase
*rework thermal engine
*rework ram-managment
*lot see my git
ota json has been changed
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
v3.6
*upstreamed to v4.258
*latest proton clang
*added anxiety io for faster app opening
*added z3fold from sony
*improved zram performance
*updated ashmem
*fixed some thermal sensor spamming on logcat
*more fixes see my git
v3.5
*upstreamed to v4.253
*Merged tag LA.UM.9.2.r1-02000-SDMxx0.0
*latest proton clang
*Backport new vmalloc for "large performance benefits"
*selinux: Allow audit to be disabled
* page_alloc: double zone's batchsize
*nuke more debloat
*more optimation for better smoothness
now ui will be more smooth
*Updated wireguard to "1.0.20210124"
v3.4
*DxT rebased to caf base
*upstreamed to v4.251
*added persist bug fix
*latest proton clang
*Gpu added 710 freq
*more ion fixes from sultan
*Enable CONFIG_HID_NINTENDO
*Updated wireguard to "1.0.20201221"
v3.3
New Year Release
*upstreamed to v4.248
*latest proton clang
*Gpu oc to 800mhz
*no thermal throttling on gpu
*more ion fixes from sultan
*Updated wireguard to "1.0.20201221"
note uc version pushes to bimonthly release
v3.2
*upstreamed to v4.247
*fix payload calculation
*usb: Add Drivedroid Support
*power: msm-core: Fix mutex not getting unlocked in error path
*cpufreq: stats: optimize proc files
*mm: speed up mremap by 20x on large regions
*work on cpu idle
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clang
**** rework on uc version -it now fully stable no thermal throttling ****
*for the people on xda i released v3.1 on my telegram group , i forget to update on xda
that why directly releasing v3.2
v3.1
*upstream to v4.244
v3.0
*upstreamed to v4.240
*clean up codes
*fixed build warning
*added additional safetynet patch
*rework on thermals
*work on cpu idle
*work on ram managment
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clan
v2.8
*upstreamed to v4.239
*power: bcl: Improve power efficiency of the workqueue
*used latest proton clang (20201010)
v2.7
*upstreamed to v4.238
*qcacld-3.0: Disable Wifi SAE by default
*optimizations for block
*used latest proton clang (20200930)
v2.6
*upstreamed to v4.237
*New OC for payton (thnx to seba3567)
*Remove some scheduler
*ipc logging disabled
*changes on debugfs
*increase thermal trip points
*optimize gpu
*used latest proton clang (20200923)
Reserved
Much appreciated! I've been wanting a custom kernel for Moto x4!
Running on HavocOS 3.6, seemingly no issues. Definitely feels snappier than the base kernel. Will update after a couple days use.
Thanks again!
Installation instructions?
Zohaibzx said:
Installation instructions?
Click to expand...
Click to collapse
Method 1: Download and install the zip for your rom from the download links, then flash in twrp
Method 2: Use Franco Kernel Manager (requires root) and configure it to use the proper link listed under OTA support. FKM will read any new releases in Dhinesh's github, and update the kernel without a need to flash in recovery.
Hope that helps!
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Flashed using fkm in pixel rom. No issues
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
helo123 said:
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
Click to expand...
Click to collapse
U can manually set minimum freq
Zohaibzx said:
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
Click to expand...
Click to collapse
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
dhinesh_cool said:
U can manually set minimum freq
Click to expand...
Click to collapse
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
RBJ26 said:
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Click to expand...
Click to collapse
U need clean flash latest havoc then install
helo123 said:
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
Click to expand...
Click to collapse
Weird I will check ,but lag is due to ram management
I added some tweaks for ram management that was causing lag after sometime for 3gb variant I was aware of this issue I will fix soon
dhinesh_cool said:
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
Click to expand...
Click to collapse
1900-7 Dual Sim 3GB 32GB
dhinesh_cool said:
U need clean flash latest havoc then install
Click to expand...
Click to collapse
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
RBJ26 said:
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
Click to expand...
Click to collapse
Flash through twrp
Or u need root to flash via fk manager
dhinesh_cool said:
Flash through twrp
Or u need root to flash via fk manager
Click to expand...
Click to collapse
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
RBJ26 said:
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
Click to expand...
Click to collapse
On FKM u need to give proper permission to storage then on flasher u need select storage and give access

Categories

Resources