Orginal post:
https://www.google.pl/amp/s/forum.x...lopment/experimental-phh-treble-t3709659/amp/
Downolad Version V10:
With gapps and Su:
https://androidfilehost.com/?fid=746010030569954763
Without gapps and Su
https://androidfilehost.com/?fid=673956719939820512
Installation:
- First, you MUST be running a stock Android 8.0 ROM.
- Obviously, unlock your bootloader
- Download the correct system.img variant (see list of devices above, and dowload links below)
- Flash the system.img
- Do a Factory reset
- Reboot
What nor working?
- Broken camera because DRM KEY...
But all probably work pretty good!
For Xperia XZ1 and XZ1 COMPACT FLASH ONLY A version!!
Changeleog
v10: (2018-02/18)
- Android 8.1 !
- Includes versioned vndk, so devices running both 8.1 and 8.0 should work.
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Idk i not test this because my phone go to repair. I think camera not work on all apk. Because drm key broken but i don't know on 100%.
ok I will try it
eggimong said:
ok I will try it
Click to expand...
Click to collapse
Give screen plz. I will add on #1 post. And thank u!
i stuck on bootloop..
i flashed the file include su and gapps on 47.1.A.12.75. it stuck at sony boot logo then i flashed nosu and it stuck at boot animation
then i downgraded xz1 on 47.1.A.8.49 and flashed both but same result
i am not good at english :/
eggimong said:
i heard google camera hdr+ working on android 8.1. is it working? What about battery efficiency?
Click to expand...
Click to collapse
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
snake218 said:
Maybe off topic but in Xperia XZ, Google camera hdr mod work fine without DRM keys in AOSP rom. I guess should work the same for XZ1
Click to expand...
Click to collapse
you're right I installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. it works hdr+!
eggimong said:
you're right i installed aosp 8.1 (https://forum.xda-developers.com/xperia-xz1/how-to/aosp-8-1-t3750951)because project treble cause bootloop. It works hdr+!
Click to expand...
Click to collapse
but their are limitation from sony like back cemra is set to 17 mp and iso set to 800 only they are in kernel i am working on it i am now learning kernel patching i have not done before lets hope for best
You can use TWRP brush into it？
V11 released
who can test that version?
I'll give it a shot
Download link?
N1ghtr08d said:
Download link?
Click to expand...
Click to collapse
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Redcalibur said:
Can be found in the original post from the treble forums.
Here is the post:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Good luck, let us know.
Click to expand...
Click to collapse
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
N1ghtr08d said:
Complete waste of time. I tried several different ways to flash this ROM but it's just not compatible with the XZ1 8341. Now i have to flash back to stock and the restore my TWRP backup.
Incompatible ROMs should NOT be posted on these forums unless they have been tested at the very least by the OP.
Click to expand...
Click to collapse
Hey, I'm asking this just to be sure that we can consider the rom incompatible for our device.
You used the rom that said A-only, right? Since the thread states that the XZ1 only supports build A-only. If so, we could try mentioning the issues you experienced in the original thread.
Thank you for your time.
Edit: I've just seen your posts in the original thread. Sorry for the quote.
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
I had the same experience with all A-only versions.
N1ghtr08d said:
No it's ok, I don't mind helping, it's just frustrating. I flashed the A only nosu vanilla version, then booted into TWRP and performed a factory reset and when I rebooted into system the phone just hangs on the Sony boot screen for ages then reboots and does the same thing again and again.
Click to expand...
Click to collapse
try this version, for me on xz1c it loads to the inscription of "xperia", and it hangs https://drive.google.com/open?id=118pwXm2UK95AaYTvIfDAiWDBk-rUBh6Q
Infinite restart animation………………cnm?
Related
Project Treble made it possible to install LineageOS on a P10 running on Oreo (not mine, yet). More info on the Honor View 10 forum: https://forum.xda-developers.com/honor-view-10/development/rom-lineageos-15-1-t3753000/post75665202
This sounds amazing. Will have to try over the weekend if I get time.
if i have time later tonight ill give it a try but i don't think that'll work bc i'm on 7.1 and i haven't gotten the update for oreo on mine vtr-l09
D4XT3R said:
if i have time later tonight ill give it a try but i don't think that'll work bc i'm on 7.1 and i haven't gotten the update for oreo on mine vtr-l09
Click to expand...
Click to collapse
Yes that's what I'm also wondering because I have an VTR-L09 and haven't gotten an update for Oreo yet and I kinda wanna try this but don't wanna brick my device
P10 Plus can also be used
with no root BOOT, I was flashed the system.
Wahoooo said:
with no root BOOT, I was flashed the system.
Click to expand...
Click to collapse
Were you on EMUI 8 before you flashed this?
Is there a way to get the fingerprint gestures working as in emui?
i'm now on emui 8.0 and i haven't updated to lineage 15.1.. but i don't think that i'll be the first one to do it i don't want to brick my phone
I just installed AOSP version from 4PDA forum ist 64 bit version oreo 8.1 instalation trought adb fastboot,manual system.img flash.Working but have many bugs,fast charging not work,aosp camera crash external camera app working well,many apps crashing like facebook,wats app.Not able to use for daily device.Lineage and RR also avaible.I will test later.
Now tested lineage os,it work perfectly all apps working,camera working,I will use as daily phone now.
x1988 said:
Now tested lineage os,it work perfectly all apps working,camera working,I will use as daily phone now.
Click to expand...
Click to collapse
What about the camera quality?
It bad than stock rom,just because aosp camera not using second monochrome sensor,later i will try with default huawei camera app, from stock rom
x1988 said:
It bad than stock rom,just because aosp camera not using second monochrome sensor,later i will try with default huawei camera app, from stock rom
Click to expand...
Click to collapse
What system image did you use for the P10?
Friends I am a little new in this roms for huawei p10 but I would like to know if you can install linage os 15.1 for huawei p10 and how can I do it. Thank you
Does LTE works without problems?
DarkPJV said:
Friends I am a little new in this roms for huawei p10 but I would like to know if you can install linage os 15.1 for huawei p10 and how can I do it. Thank you
Click to expand...
Click to collapse
Follow the link in the OP. Basically you replace the system.img.
M1chiel said:
Follow the link in the OP. Basically you replace the system.img.
Click to expand...
Click to collapse
But it works correctly for my huawei p10. I do not want to ruin my phone You already proved it in huawei p10. Thank you very much for answering
So I have it installed and it boots. The issue I keep encountering is with Google Services Framework popping up all the time, so I can't get past the setup screen. Anyone have any ideas?
EDIT: Never mind. Just installed stock recovery and did a dalvik cache wide/format. Up and running!
MrDanMak said:
So I have it installed and it boots. The issue I keep encountering is with Google Services Framework popping up all the time, so I can't get past the setup screen. Anyone have any ideas?
EDIT: Never mind. Just installed stock recovery and did a dalvik cache wide/format. Up and running!
Click to expand...
Click to collapse
Can u show some screenshots please?
berka38 said:
Can u show some screenshots please?
Click to expand...
Click to collapse
Sure thing. Attached.
I found oreo and pie roms for our ultra on androidfilehost but after flashing I am not able to get the touch working. I think its a recovery issue, but the twrp-3.1.1 uploaded by zawzaw doesn't mount my system read/write, so no luck. Can anyone test the roms please? Also is there newer version of twrp available for our device?
Here is the link
https://androidfilehost.com/?w=search&s=togari
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
billyliem said:
I want to test it but mw z ultra cant get a single twrp working, is there a way to flash it without twrp?
Click to expand...
Click to collapse
Have you tried 3.0.2-0? That has been working for me on my C6833.
Yes, it is not working for me
Hello does the rom working? I cant install it because i cant have TWRP working in my device
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Rom tester
Hello
First of all thank you for your work, we really appreciate it, i have a suggestion, please make a Telegram group so we can join and test the rom and tell you the bugs and issues, thank you again
Which Kernel to use with this Rom?
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
the custom rom of the android pie will be continued ?, and I think you could do a post of your roms I think it would give a good revival in this forum and release the source code of the roms and the kernel
raschad said:
Hi,everyone! I'm builder this rom. I build a new ROM from source. Check it
I don't know what works and what doesn't.
The work of the touchscreen is depends on the kernel. Check
Click to expand...
Click to collapse
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
I would love to at least have a custom Android rom oreo stable and functional but by the way it will take a little longer for this to happen
...
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Jaime albino said:
I tried the last build of your oreo version, after i had done this solution to fix the touch issue https://forum.xda-developers.com/xp...t/fix-fix-touch-roms-6-0-6-0-7-x-8-x-t3884411
I run the rom for half a day, and the touch worked fine using the solution above, i only had problem with the sim card, the rom doens't recognize it so i can't have mobile network and make calls, and i lost my imei too, another problem that i ran to was that the camera didn't worked too.
beside that i didn't have any problem, but i came back to RR 5.8.3 since i couldn't use mobile network in this rom.
Click to expand...
Click to collapse
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no work even in the recovery.
Click to expand...
Click to collapse
Same Here , flashed the fix , and no touchscreen response after boot
phhuang said:
I'd tried your touch fix but got no luck on either Pie or Oreo ROM. The touch screen got no
work even in the recovery.
Click to expand...
Click to collapse
pvillasuso said:
Same Here , flashed the fix , and no touchscreen response after boot
Click to expand...
Click to collapse
i wasn't using those roms anymore because in the oreo version the camera doesn't work and mobile network too, the
9.0 version didn't work either, it's always in bootloop, but i flashed the oreo version again and the touch fix
using philz recovery and twrp and the touch worked like a charm as i said you just need to wait a few seconds, the
purpose of this fix is to fix the touch problem within the rom and not in the recovery, if your recovery doesn't
have touch is not something that this fix or i can do sorry. But i can guarantee that this fix works in this oreo
version because i tested it myself after a clean flash, please try again and tell me if it worked for you.
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
install error 7 in TWRP?
raschad said:
Hi, everyone! I'm compilled new ROM
Android 9.0 - AOSP Extended 6.1 for Togari
I dont know how working touchscreen.
Check it
DOWNLOAD
Click to expand...
Click to collapse
phhuang said:
install error 7 in TWRP?
Click to expand...
Click to collapse
Yep same to me.
Malle355 said:
Yep same to me.
Click to expand...
Click to collapse
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
raschad said:
Open on PC through WinRar and edit
META-INF/com/google/android/update-script
And delete the top 3 lines (getprop...)
Click to expand...
Click to collapse
Its booting but touch not working. Tried to flash the touch_fix.zip but not working.
someone needs to compile a new twrp recovery for us, xperia z ultra orphans
I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Riskypedia said:
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Click to expand...
Click to collapse
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
arslancn said:
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
Click to expand...
Click to collapse
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Riskypedia said:
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Click to expand...
Click to collapse
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
arslancn said:
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
Click to expand...
Click to collapse
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Riskypedia said:
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Click to expand...
Click to collapse
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
which version of gcam works?
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
did you have same bug on XZ1?
the battery level always in 20%.
arslancn said:
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Click to expand...
Click to collapse
Sadly, it seems it's impossible to use AOSP based system because of its stability. It's way too unstable to use, but I think I can share the built images to make progress! Again, thanks for your help
gacky1601 said:
did you have same bug on XZ1?
the battery level always in 20%.
Click to expand...
Click to collapse
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Riskypedia said:
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Click to expand...
Click to collapse
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew the methods to the image step by step from Sony's source.
Maybe we should build the kernel by ourselves
The problem you mentioned about disconnecting network, does it happens on wifi or mobile data?
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
gacky1601 said:
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew how to build the image step by step from Sony's source.
Maybe we should build the kernel by ourselves[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel
Click to expand...
Click to collapse
lilbrat said:
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
Click to expand...
Click to collapse
I think you can just try it with stock boot , vendor and oem.
I will works perfectly.
Don't forget to report if there is any problem or it work properly.
---------- Post added at 04:37 PM ---------- Previous post was at 04:20 PM ----------
[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel [/QUOTE]
Yeah. I think there are a few developers work on XZ1.
Have .
The working perfectly rom will be our target, like the thread below.
https://forum.xda-developers.com/xperia-xz1-compact/how-to/xz1c-g8441-lilac-aosp8-1-t3762581
Share your all files so that i can work with gcam to be installed properly to latest pixel experience.
Xperia XZ1 G8341 Vanilla AOSP ROM
This is my first ROM and its fully Vanilla. I Just followed this Build guide without any modifications whatsoever.
The future goal is to build a stable Rom with mostly FOSS Software, stability and useful tools/settings.
Bugs/missing functions i discovered so far:
- Camera Not working always and -> Lens Distortion. Although RAW should be possible.
- Sony Bootlogo has some Artifacts
- No automatic APN setting
- No NFC 25.05 working
- No 90/120Hz mode (or does it?)
- No Display Colour Calibration
- Low Singlethread Geekbench Score (836) and (6060 Multicore) [Governors and schedulers not optimized]
Fingerprint Sensor is working and it takes some time to find Network (not sure if bug or normal).
I hope to find usable answers to those problems + ideas and hope, to receive enough feedback to improve as much as possible.
Just Flash all files (boot, recovery [or any working TWRP], system,vendor, userdata and the OEM Binaries [
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img] and you should be good to go.
XZ1 Single Sim(25.05.19)
XZ1 Dual Sim
SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_yoshino.img
120Hz Mode
Obviously I am not responsible for bricked devices or anything that this could be related to.
XDA:DevDB Information
RumiRom, ROM for the Sony Xperia XZ1
Contributors
celeron1
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Stock AOSP Userdebug
Version Information
Status: Testing
Created 2019-05-25
Last Updated 2019-05-30
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
marios199546 said:
Don't use V8 binaries, V9 are out
https://developer.sony.com/file/dow...-for-aosp-pie-android-9-0-kernel-4-9-yoshino/
Worse perfomance is expected because of lack of qti perf framework
Click to expand...
Click to collapse
Neat!
Im gonna try these. Thanks a lot.
I would marry if you turn 60fps to 90-120-144 omg plz plz
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
There is little to nothing about this I could find for the xz1 except one oreo based rom. I have to compile the kernel for it and find out if 60+ hz is really working and how to succesfully implement a toggle option for it. Since im new at this it might take some time without help but its something I want to impliment.
The Xz1s Display obviously is really underperforming in non Sony roms without the "Bravia engine" (colour apperence) imo compared to other open roms. I tried the Bravia magisk module but could not see any difference (also did not checked what it should do at system level).
So if someone has more knowledge feel free to share
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
*Update 29.05. I Fixed Wifi for the 120Hz version. link in first post
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
What about the version for two SIM cards?
Model G8342.
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Riskypedia said:
Your rom works perfect on my phone, thanks dev.
Btw, doesn't it support Treble? I cannot boot any of the GSI roms on the forum...
Click to expand...
Click to collapse
It should support Treble.
Maybe you also need to flash "Disable DM Verity" and "Magisk" after
Can be used on G8342 ? ?
Sent from my Sony Xperia XZ1 using XDA Labs
celeron1 said:
I compiled a Kernel from here and modified:
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-base-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar-sde.dtsi
arch/arm64/boot/dts/qcom/dsi-panel-somc-poplar.dtsi
(changed 60hz to 90/120hz).
How can I check if the Panel really is working under those frequencies and if other steps are needed?
When compiling I got an Error with drivers/staging/wlan-qc/qcacld-3.0 -> so i removed them from drivers/staging/Kconfig (So apparently no Wifi).
These are the Kernels (boot):
90Hz
120Hz
Camera seems to work without problems (also Raw) so I guess there is something wrong with the precompiled Sony Kernel.
Also the Sony bootlogo is not present (no artifakts??)
And again. Flash at own risk.
Click to expand...
Click to collapse
Can i use this kernel with stock sony rom? (Existenz patched btw...)
ΒΕΓΑ said:
Can i use this kernel with stock sony rom? (Existenz patched btw...)
Click to expand...
Click to collapse
The Kernel is for AOSP (Linux kernel 4.9) so normally it shouldnt work with the Stock Firmware but i dont know if it works with the patched Existenz rom.
therma.cpp said:
What about the version for two SIM cards?
Model G8342.
Click to expand...
Click to collapse
Its for the single Sim.
Im not satisfied with the current State but I can build a dual sim version as well. (Building on hdd due to small SSD so it might take a while)
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
sinkoo1979 said:
Screen is not responsive (SOV36). Any suggestions?
update: not the rom. tried to flash different rom and same result.
Click to expand...
Click to collapse
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
celeron1 said:
Does it respond different while charging?
Is the screen properly clean?
Try flashing the last stock rom > same result?
If not try flashing any gsi > result?
Then full cfw flash + sw binary.
And do factory resets before flashing.
Hoping for the best. Not sure how and if the SOV36 model differs from the rest
Click to expand...
Click to collapse
no
yes
no
did not work
works with stock
sinkoo1979 said:
no
yes
no
did not work
works with stock
Click to expand...
Click to collapse
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
celeron1 said:
Dis you try one of these GSIs and did you flash the SW-Binaries after?
How "non responsive" is it? Laggy/Not at all/Ghost touches etc.?
Since this is off-Topic i will delete this message after you read it. You shuld open a new Thread where the Problem could be discussed.:good:
Click to expand...
Click to collapse
Nothing at all
sinkoo1979 said:
Nothing at all
Click to expand...
Click to collapse
Try flashing a oreo based stock rom.(or if you only tried oreo then pie), then flash gsi etc
ΒΕΓΑ said:
I would marry if you turn 60fps to 90-120-144 omg plz plz
Click to expand...
Click to collapse
don't you think it would be the least manner to put some pics of your ass when you come around with "marrying-for-asking"? XD :silly::silly: