Hello Everyone,
at 1st let me state that this is not my work, it's the work of @Dante63 that's posted and maintain by him on the Miscellaneous Android Development Section of XDA... i just helped him test it.
this works on OnePlus 3 & 3T.
Update Sept 2nd 2018
Version 2.0
based on 5.0.5 file was provided by @mcdachpappe big thanks to him
Updated to Magisk Template 17.0
Download from Google Drive
OR
Attachment
Version 1.0 (outdated and wont work on newer OOS 5.0.X)
OnePlus3/T Google Drive - SoundMod - TWRP + MAGISK
on the GDrive forlder there're 4 files
1- the original file used to make the mod (may be used to revert for non Magisk users without backup)
2- DYI file for manual placement with root explorer (system/vendor/etc with 0644 permission)
3- TWRP flashable zip
4- Magisk Module
Note & Warning /
when using this mod with AML (Audio Modification Library) you need to either install it after AML or replace the file "mixer_paths_tasha.xml" inside the AML module with the one in this mod, other wise the file included on AML will be the one working and this mod wont.
DIY Volume Level:
Speaker Volume isn't present in the mixers
Code:
<path name="speaker">
------------------
<ctl name="RX0 Digital Volume" value="90" /> <!--earpiece , default is 84, Safe up-to 95, beyond is DANGEROUS-->
------------------
</path>
again All thanks to @Dante63 to his work and support.
to check change logs
https://forum.xda-developers.com/showpost.php?p=75203703&postcount=2
The magisk module works solid here. Thanks for sharing.
Thank you @theduke7 for creating the Thread, however I do encourage that I check the 3T mixer files, regardless it may work but there may be slight difference which if they had few additional features, they'd lose them... It won't take much time, If anyone can post the mixers for 3T and mention me, I'll check them ASAP and report if 3T is Similar to 3...
Dante63 said:
Thank you @theduke7 for creating the Thread, however I do encourage that I check the 3T mixer files, regardless it may work but there may be slight difference which if they had few additional features, they'd lose them... It won't take much time, If anyone can post the mixers for 3T and mention me, I'll check them ASAP and report if 3T is Similar to 3...
Click to expand...
Click to collapse
sure m8, i added a notice to the op, and i'll add it again here
Verified working On 3T as well.
My 3t mixer`s but i have 3 files on rr oreo https://yadi.sk/d/flTm0huE3TbDyC
On OP3T Omni 8.1 I have only 3 files too. https://drive.google.com/open?id=1V185f5L5aJNF8yJFBy0N7rc8jfWhlK_M
Feedback
On op3t RR nougat there is one file in the:
/system/vendor/etc (mixer_paths_tasha.xml)
And two files in the:
/system/etc (sound_trigger_mixer_paths_wcd9330.xml and sound_trigger_mixer_paths.xml)
I attached these files.
Dward40 said:
My 3t mixer`s but i have 3 files on rr oreo https://yadi.sk/d/flTm0huE3TbDyC
Click to expand...
Click to collapse
ejdam_ said:
On OP3T Omni 8.1 I have only 3 files too. https://drive.google.com/open?id=1V185f5L5aJNF8yJFBy0N7rc8jfWhlK_M
Click to expand...
Click to collapse
Sam998 said:
Feedback
On op3t RR nougat there is one file in the:
/system/vendor/etc (mixer_paths_tasha.xml)
And two files in the:
/system/etc (sound_trigger_mixer_paths_wcd9330.xml and sound_trigger_mixer_paths.xml)
I attached these files.
Click to expand...
Click to collapse
thank you guys, i think @Dante63 can take a look at these, but i think we need files from OOS, the Oreo OP3T OS , they'll be accurate and work on every rom.
theduke7 said:
thank you guys, i think @Dante63 can take a look at these, but i think we need files from OOS, the Oreo OP3T OS , they'll be accurate and work on every rom.
Click to expand...
Click to collapse
Sam998 said:
Feedback
On op3t RR nougat there is one file in the:
/system/vendor/etc (mixer_paths_tasha.xml)
And two files in the:
/system/etc (sound_trigger_mixer_paths_wcd9330.xml and sound_trigger_mixer_paths.xml)
I attached these files.
Click to expand...
Click to collapse
ejdam_ said:
On OP3T Omni 8.1 I have only 3 files too. https://drive.google.com/open?id=1V185f5L5aJNF8yJFBy0N7rc8jfWhlK_M
Click to expand...
Click to collapse
Each one of you provided their mixers and each mixer is different from the other...
My Question is which one of you gave me the STOCK OnePlus 3T?
UPDATE: None of you gave me STOCK Mixers
Dward40 said:
My 3t mixer`s but i have 3 files on rr oreo https://yadi.sk/d/flTm0huE3TbDyC
Click to expand...
Click to collapse
I got a request for OP3T on my thread for Oreo, and it was Stock Mixers, which Match the OP3...
Yes they are Compatible...
But I have no clue what are these Mixers here, Probably Custom...
The SoundMod will work regardless, but if their ROM depend on the Custom Mixer it (unlikly to happen) it will have issues...
So it's a Trial and Error for them...
But STOCK OP3T is Fine...
You can remove the Notice
Dante63 said:
Each one of you provided their mixers and each mixer is different from the other...
My Question is which one of you gave me the STOCK OnePlus 3T?
UPDATE: None of you gave me STOCK Mixers
I got a request for OP3T on my thread for Oreo, and it was Stock Mixers, which Match the OP3...
Yes they are Compatible...
But I have no clue what are these Mixers here, Probably Custom...
The SoundMod will work regardless, but if their ROM depend on the Custom Mixer it (unlikly to happen) it will have issues...
So it's a Trial and Error for them...
But STOCK OP3T is Fine...
You can remove the Notice
Click to expand...
Click to collapse
yes ,8, the ones provided here are custom,
i'll remove the notice
Is this true stereo or just earpiece enabled to play L channel?
przemcio510 said:
Is this true stereo or just earpiece enabled to play L channel?
Click to expand...
Click to collapse
I think it just enables dual speaker
can this mod damage the earpiece?
omar2005 said:
can this mod damage the earpiece?
Click to expand...
Click to collapse
If you pump too much volume, yes, it can be damaged
Nougat? Specifically Sultans LOS
omar2005 said:
can this mod damage the earpiece?
Click to expand...
Click to collapse
As long the sound comes out clean and clear, then no harm will be done... Crackles and noise will damage the earpiece..
moSess said:
Nougat? Specifically Sultans LOS
Click to expand...
Click to collapse
Put a request on my thread for your LOS ROM...
this looks good, but sorry a bit confuse with this "on the GDrive forlder there're 4 files"
i have magisk, should i use "OREO_MAGISK_OnePlus3_3T_DualSpeaker.zip" only? Or should I do something with those 4 in different methods for each file?
and where should i paste volume level code?
thanks.
abayer.kate said:
this looks good, but sorry a bit confuse with this "on the GDrive forlder there're 4 files"
i have magisk, should i use "OREO_MAGISK_OnePlus3_3T_DualSpeaker.zip" only? Or should I do something with those 4 in different methods for each file?
and where should i paste volume level code?
thanks.
Click to expand...
Click to collapse
Yes, that's exactly the file I flashed
Can confirm that the magisk mod is working wonderfully on one plus 3 running Unleash OS.
abayer.kate said:
this looks good, but sorry a bit confuse with this "on the GDrive forlder there're 4 files"
i have magisk, should i use "OREO_MAGISK_OnePlus3_3T_DualSpeaker.zip" only? Or should I do something with those 4 in different methods for each file?
and where should i paste volume level code?
thanks.
Click to expand...
Click to collapse
the zip you mentioned is right for you....
the vol level code need to be added to the file inside the magisk module then replaced...
open the module and inside the folder system > inside several folders there's an xml file, open in a text editor... the lines are already there, you can adjust the level ... max is 95 (or you're going to blow up your ear piece, also if you're going to use v4a or any similar audio mod also keep the level in the 84-87 range... max 90 if you're very cautious with the device volume...obviously this is do at your own risk thing, Dante63 set it up for the safe level.
Related
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
MaxtremePL said:
The new Beta of OxygenOS 3.0 does NOT come with any audio enhancements, so you may even flash packages of audio mods, as I did
Click to expand...
Click to collapse
Can you share the audio mods you used?? Thanks
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
shakaraja said:
Hey Guys!
I actually have been looking for a way to get Viper4Android working today. And i actually found a method to do it. By luck, OnePlus posted the Oxygen 3.0 based on android 6.0.1 today. This version of android is compatible with the newest version of Viper4Android. This version actually comes without an equalizer like 2.2... but oh well. I liked viper way better anyway.
Just wanted to give my 2 cents to the forum.. just wanted to let people know there is opportunity here to enjoy better music while you are waiting for CM 13 like me =)
How i got it to work:
- First install Oxygen 3.0 with a custom TWRP created for Oxygen 3.0 (see this url: link to oneplus forums)
- Secondly, use the custom made SuperSU (credits to @Yash98) = this link
- When the phone is updated and rooted, you can install BusyBox through the app store. After you did that download the APK of Viper on your phone via the original XDA thread
- Don't run it yet. Download SELinuxModeChanger via the original XDA thread.
- Change the mode to permissive, go back to Viper and install the drivers. It'll ask you for a reboot, do so. After the reboot open Viper4Android and press the 3 dots on the right high corner. Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Hope this can make anybody happy. I'm an audiophile so i'm more than happy.
- Shakaraja.
Click to expand...
Click to collapse
Thanks for the detailed guide... Will test now thanks
anees167 said:
Can you share the audio mods you used?? Thanks
Click to expand...
Click to collapse
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Did you disable boot to stock recovery and also you may have to fastboot recovery
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
I have distorted sound using the v4a. How fix it?
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
It dosent work getting distorted sound
viper4android install than sound break problem is fix?
mohamm3edadam said:
I'm not able to install custom recovery it just gets stuck at the one plus logo. And when I reboot normally it gets back to stock recovery. Any solution plz
Click to expand...
Click to collapse
You need the TWRP version meant for H2OS. You will find it in any H2OS based ROM thread.
Skick3 said:
Can I reduce the loudest sound of OxyGenOS3 with Viper4Android?
Click to expand...
Click to collapse
Yes, there are options. Find gain controls and tweak them to your preference.
ras_fyah said:
I have distorted sound using the v4a. How fix it?
Click to expand...
Click to collapse
Akhil701 said:
It dosent work getting distorted sound
Click to expand...
Click to collapse
If you still are on OOS 2.2.x then V4A will not work. This fix is specifically meant for OOS 3.
If you are on OOS 3, then try reflashing OOS 3 with a clean flash. This might fix it, but only if you are on OOS 3.
mvha said:
Bluetooth doesn't work when V4A drivers is installed.
Anyone can solved this problem?
Click to expand...
Click to collapse
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
locxFIN said:
Thanks, got it working. Don't notice too much difference in sound, but maybe I just haven't foudn the right settings yet.
Click to expand...
Click to collapse
Search XDA Forums for V4A profiles and use a preferred profile according to your type of music.
whwhdtk5689 said:
viper4android install than sound break problem is fix?
Click to expand...
Click to collapse
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
arch_geek said:
Only if you have flashed the latest beta of OOS 3. This fix is OOS 3 specific and DOES NOT APPLY TO OOS 2.
Click to expand...
Click to collapse
yes. i'm oos 3.0 MM.
wow i'm install now viper4android !
thank you !
arch_geek said:
Did you install the right drivers? And also check if you set the SELinux mode to Permissive.
Click to expand...
Click to collapse
You've Got a Point. I have installed wrong version of V4A. Now working all. Thank You
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
shakaraja said:
Examining the driver status would show that the driver is enabled. If it's not. Try to empty the google music cache & removing the data (i did so somewhere in the process).
Click to expand...
Click to collapse
Hm i had the same problem. Driver Status was false.
My Workaround was i clicked in Viper many Menus up an down. Lock Effect Mode disable to speaker. UI Setting to Expert and suddenly the Driver Status was True.
No cleaning data. I didn´t installed google play music.
With Viper4Anroid on OO2 Oxygen3 the sound are definitly noiser and better. (Master Gain (Limiter) / Output Gaine -20db)
Thx for the hint with these app.
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
How to root your phone. You find it in these guide
> http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
MaxtremePL said:
Divine Beats by Royal Seeker (DolbyDigital+ version) located at:
http://theroyalseeker.github.io/
In order for this mod to work you need permissive SElinux
Click to expand...
Click to collapse
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
_Epix_ said:
Sorry for the noob question and if I'm posting at the wrong place. When you first install OOS 3.0 it's not rooted right? How do I root it? Thanks for the help.
Click to expand...
Click to collapse
If you flashed OOS 3, it is highly likely that the build was not a pre-rooted build. To root follow this guide at this link :
http://forum.xda-developers.com/oneplus-2/general/guides-how-to-guides-beginners-t3146568
anees167 said:
Last time I used viper was the nexus 4 days almost 2 years ago... They have improved the audio (most likely new audio hardware on OP2) but yh it sounds a lot better then stock oxygenOS 3 it does the job till Maxxaudio is back
Click to expand...
Click to collapse
Actually V4A can be tweaked to sound better than MaxxAudio. Try XtremeMUSIC mod by androidexpert35. It includes V4A as an addon.
Link to the above mod is here: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
&roid said:
Thank you soooo much! This did the trick. I was so frustrated with the MM update until you saved my ears with this suggestion. :good:
Click to expand...
Click to collapse
Try XtremeMUSIC mod. Link: http://forum.xda-developers.com/android/software/mod-beatsaudio-e-xloud-installer-t3029951
WETAmod
Any issues need to be accompanied with relative info, I can't fix anything if I have no idea the module, firmware version, conflicting modules.. it'll drive me nuts if you just say something doesn't work and that's all you put
WETAmod is a control app that installs audio and ui mods over a stock system.
WETAmod, for the OnePlus 6, is now, the controller of WETA UI mods, such as 3Minit and NavBar etc. Audio mods are staying separate as independant Magisk Modules. It just makes more sense that way.
For my last 5-6 devices I've built roms based off stock firmware images, though I'm deciding this is kind of a pointless endeavor, for me anyway. Downloading and flashing a gb zip when most files are not modified is a waste of bandwidth. WETAmod is an evolution from my roms to something more compact. Existing files will be replaced and patched only where needed.
Included in the module folder..
3Minit battery - status bar + Home button
3Minit clock
Battery bar - navigation bar
Navigation bar height
Immersive modes
Audio (individual Magisk Modules)
- WETA selected audio modules
- V4a 2.3.4.0 + 2.5.0.5 + 2.6.*
- dual speaker mod
- some experimental things activated
See post #3 for operation notes
Thanks to @zhuhang (v4a), @gharrington (3Minit), @topjohnwu (magisk)
@Mentalmuso
--->
Downloads + links...
Telegram thread
t.me/WETAop6
Module Folder
https://mega.nz/#F!atFjxATC!PVM77k3NGB9jurmiN43XGw
--->
WETAmod instruction
1. Download and flash the appropriate installer zip for your firmware version.
2. Flash via TWRP (magisk modules can be flashed via magisk manager also)
3. Open WETAmod and Grant su permissions.
The app itself, is similar to rom control apps but the majority of mods are applied via shell scripts. If the page you are making selections on has an "execute" or "apply" bar on it, you need to press that for the mods to be applied. This may result in a sysui reboot, or in some rare cases a full reboot.
If you have more questions, then come visit the telegram thread. I am not the best at explanations via xda at times, and things are always evolving in my corner.
WETA Audio
Android audio. This can be a touchy subject with regards to driver and module ports from other devices. I'll be transparent here, and say this... drivers from other devices may prove useless. Though the drivers I use here, have been tested to be functional... Which is a good start I'd say, then using ears... have a perceived difference in the positive to stock audio. Use your own ears, be subjective, use or don't use this module.
--->
Mentalmuso said:
WETAmod Magisk Modules
This is a simple thread sharing modules I am using personally on DP3. While I decide what direction I am going to take with this device, I needed to be on the latest firmware with my favorite mods.
I am currently still working on the note 8 rom WETA, and am deciding whether a rom is actually something I want to do on this device considering there are already a few great options in this forum.
Thanks to @zhuhang (v4a), @gharrington (3Minit), @topjohnwu (magisk)
@Mentalmuso
--->
Click to expand...
Click to collapse
deleted i know it's a horrible idea but i wanted to give samsung expericence another try
Is this for android p only?
omar2005 said:
I am watiting for this note 8 rom
thank you
Click to expand...
Click to collapse
What?
Edit.. I have a Note 8 device.... And a Note 8 ROM. I'm not saying there is a note 8 ROM planned for this device. That would be a horrendous idea.
--->
vxkillswitchxv37 said:
Is this for android p only?
Click to expand...
Click to collapse
It is, as that is what I run as a daily driver
What is "WETA" ?
Can I use this modules on other roms?
Mar-cel said:
What is "WETA" ?
Can I use this modules on other roms?
Click to expand...
Click to collapse
It's a tag, it's a name, it's an identifier.
You can use them on any dp3 or upcoming Pie OOS based rom.
Though I'd imagine all the OOS roms once updated to pie will have these features. I'm just filling a gap.
I'm a Samsung and LG Dev mainly, that has become bored and annoyed with things surrounding those devices.
Thank you man !
Neil_Armstrong_ said:
Thank you man !
Click to expand...
Click to collapse
No sweat
Does the 3minit battery module also work with the official oreo?
cukisan said:
Does the 3minit battery module also work with the official oreo?
Click to expand...
Click to collapse
None of these will work with Oreo. Is 3minit not available anywhere? I only made these mods as I couldn't find anything for pie. Id be happy to make some Oreo versions as well.
I was sure but I wanted confirmation. I looked around but nothing for Oreo. thank you very much anyway
cukisan said:
I was sure but I wanted confirmation. I looked around but nothing for Oreo. thank you very much anyway
Click to expand...
Click to collapse
I'm on Oreo right now, and even though Pie is imminent, I'll make the 3min mods as I miss em
cukisan said:
I was sure but I wanted confirmation. I looked around but nothing for Oreo. thank you very much anyway
Click to expand...
Click to collapse
I've started adding Oreo modules to the mega folder. 3min and v4a so far
For people who require more instant gratification
Telegram thread
t.me/WETAop6
--->
So is this just straight up other modules you packaged up? Not sure I see the point.
EmRav said:
So is this just straight up other modules you packaged up? Not sure I see the point.
Click to expand...
Click to collapse
Is that a negative vibe I sense there?
I've had the op6 for just over a week, was on dp3 and made the modules for it. Because thats what I do. I didn't see any other dp3 modules out there so I thought I'd share... You know.. for the community.
What exactly are you getting at? And if you have "no point" then just move along.
Mentalmuso said:
Is that a negative vibe I sense there?
I've had the op6 for just over a week, was on dp3 and made the modules for it. Because thats what I do. I didn't see any other dp3 modules out there so I thought I'd share... You know.. for the community.
What exactly are you getting at? And if you have "no point" then just move along.
Click to expand...
Click to collapse
Nope! No negative vibe, I just see all the things you listed available on the Magisk download already so I'm wondering if there is any difference between your bundle and those. If there isn't a difference shouldn't we keep things to one source and move this to a purely discussion forum?
Dual Speaker Sound Mod for G95xU/U1/W/0/08
Snapdragon S8/S8+ Pie, Oreo and Nougat
*NOTE: it is highly likely that this is compatible with more, most or all Qualcomm Snapdragon S8 and S8+ but NOT AT ALL compatible with Exynos. Of course test at your own risk
You and only you are responsible for the decisions you make when modifying your phone
* Dual Speaker Sound Mod install instructions and download link for Pie and Oreo (TWRP,Safestrap)
Pie/Oreo Dual Speaker Mod
To install just simply select the zip you want to install flash the zip in Safestrap (TWRP)
Alternatively you can download (I attached the file) flash into Safestrap (TWRP) mount system then use file manager to back up your original found in /system/vendor/etc by copying it to sdcard or renaming it to mixer_paths_tavil.bak (i already have mine saved so i just deleted it). Select the modded file you downloaded and copy it to /system/vendor/etc then select it again to change permissions (chmod) to 0644 and voila'
Pie_Oreo_Dual_Speaker_Mod_G95xU.zip
https://forum.xda-developers.com/attachment.php?attachmentid=4717063&d=1551787087]DualSpeaker_DolbyFix_G95xPie.zip
Pie/Oreo mixer_paths_tavil.xml
*Dual Speaker Sound Mod Install instructions and download link for Nougat (Root)
Flash Dual_Speaker_Mod_Nougat_G95XU.zip using TWRP, Safestrap or just use your favorite root file explorer to replace /system/etc/mixer_paths_tavil.xml with this modded one ***Important make sure permissions on the file are set 0644
Credits
- @Dante63 For his guide and personally helping me himself
- @FatalONEM8 For helping me with zips
- @ImbaWind For Dolby Atmos Mod
- @afaneh92 for Safestrap
- @partcyborg For root on Nougat making the mod possible
- @jrkruse For making the Oreo and Pie mod possible also helping unbrick my S8
- @klabit87 for helping me unbrick my S8
- @koobie777 For testing Pie mod
- And everyone in the in the Samsung/Snapdragon/Android/locked boot loader community that loves mods
Enjoy the mod :victory:
The mod works best and is compatible with a lot of apps/mods especially stereo enabling apps as this mod only makes the phone dual speaker so it will will be mono dual speaker unless you have something installed that makes it surround sound stereo. JamesDSP, Dolby Atmos,
V4A ect.
*note to devs, you may include this mod in your ROM's without asking me first just make sure to give credits :angel:
samguy2020 said:
dual speaker sound mod for g95xu/u1/w (us/canadian models)
snapdragon s8/s8+ oreo and nougat
you and only you are responsible for the decisions you make when modifying your phone
* dual speaker sound mod install instructions and download link for oreo (safestrap)
dual_speaker_mod_g95xu.zip
*dual speaker sound mod install instructions for nougat (root)
flash dual_speaker_mod_nougat_g95xu.zip using your favorite method or use your favorite root file explorer to replace /system/etc/mixer_paths_tavil.xml with this modded one ***important make sure permissions on the file are set 0644
credits
- @dante63 for his guide and personally helping me himself
- @fatalonem8 for helping me with zips
- @imbawind for dolby atmos mod
- @afaneh92 for safestrap
- @partcyborg for root on nougat making the mod possible
- @jrkruse for making the oreo mod possible
- and everyone in the in the samsung/snapdragon/android/locked boot loader community that loves mods
enjoy the mod :victory::d
the mod works best and is compatible with a lot of apps/mods especially stereo enabling apps as this mod only makes the phone dual speaker so it will will be mono dual speaker unless you have something installed that makes it surround sound stereo. Jamesdsp, dolby atmos,
v4a ect.
*note to devs, you may include this mod in your rom's without asking me first just make sure to give credits :angel:
Click to expand...
Click to collapse
do i need flashed rom for i have dual speaker sound?
jploco said:
do i need flashed rom for i have dual speaker sound?
Click to expand...
Click to collapse
Yes, if you see where the Oreo mod is posted you will find it
samguy2020 said:
yes, if you see where the oreo mod is posted you will find it
Click to expand...
Click to collapse
thanks brother
nvm
Thanks
Thanks, works great.
has anyone tried flashing this to Pie OneUI? Safestrap works on it.
changstalicious said:
has anyone tried flashing this to Pie OneUI? Safestrap works on it.
Click to expand...
Click to collapse
The file itself would probably and most likely work but it might be placed in a different location on Pie maybe just the zip needs to be modified to place it into the new location but as of right now I am uncertain because actually going to test and update this for Pie but unfortunately bricked my S8, sorry.
Even though I do not have an S8 anymore I will try to to get this updated for Pie support because I know how important this mod is for ths S8 especially now that Pie has Dolby natively.
I just need to fine someone with an S8 willing to work with me
Please stay tuned ?
Is there a way to increase the volume of the top speaker, or is it maxed out? Been using this mod for while just waited for a dedicated thread to ask this.
Thank you guys for this wonderful mod. As previous poster posted it works great. I did one of the loka glue screen protectors. I figured I just got the glue in my earpiece I can hear it but the volume is awfully low
I skimmed through the .xml and didn't see much on volume didn't want to just start throwing values out to see if it worked ???
koobie777 said:
Is there a way to increase the volume of the top speaker, or is it maxed out? Been using this mod for while just waited for a dedicated thread to ask this.
Click to expand...
Click to collapse
TheMadScientist said:
Thank you guys for this wonderful mod. As previous poster posted it works great. I did one of the loka glue screen protectors. I figured I just got the glue in my earpiece I can hear it but the volume is awfully low
I skimmed through the .xml and didn't see much on volume didn't want to just start throwing values out to see if it worked ???
Click to expand...
Click to collapse
Search for "earpiece"
I set it to a so-called highest "safe value"
<ctl name="RX0 Digital Volume" value="95"/>
You can increase this value from 95. I know someone who set it at 145 lol but it's all on your own discretion
SamGuy2020 said:
Search for "earpiece"
I set it to a so-called highest "safe value"
<ctl name="RX0 Digital Volume" value="95"/>
You can increase this value from 95. I know someone who set it at 145 lol but it's all on your own discretion
Click to expand...
Click to collapse
Excellent my friend thanks! I saw that value but I wasn't 100% sure so I figured better to ask. When I get home I'll try increments of 10 and report back what I find to be a good balance of top and bottom speakers, imo anyways lol.
120 seems like a sweet spot for mine. I know age and condition of speaker comes into play but I'm using viper 2.
On a s8 for verification of works just fine here
TheMadScientist said:
120 seems like a sweet spot for mine. I know age and condition of speaker comes into play but I'm using viper 2.
On a s8 for verification of works just fine here
Click to expand...
Click to collapse
I'm on Oreo so no viper for me sadly, but hey thanks I'll try 120. I wonder if ainur works, I have it installed but I can't really tell a difference lol.
Well I tried 120 and wasn't really to my liking. I went up to 800 lol and not sure if the hardware is there for it but it definitely seems louder. Doesn't quite match the regular speaker, thinking about going further.
koobie777 said:
Well I tried 120 and wasn't really to my liking. I went up to 800 lol and not sure if the hardware is there for it but it definitely seems louder. Doesn't quite match the regular speaker, thinking about going further.
Click to expand...
Click to collapse
It will never match the regular speaker because it isn't built for it.
It won't ever be as good as the S9 but it's better than nothing
SamGuy2020 said:
The file itself would probably and most likely work but it might be placed in a different location on Pie maybe just the zip needs to be modified to place it into the new location but as of right now I am uncertain because actually going to test and update this for Pie but unfortunately bricked my S8, sorry.
Even though I do not have an S8 anymore I will try to to get this updated for Pie support because I know how important this mod is for ths S8 especially now that Pie has Dolby natively.
I just need to fine someone with an S8 willing to work with me
Please stay tuned
Click to expand...
Click to collapse
I would love to help with developing a dualspeaker mod for pie. Message me if your interested
Updated OP for Pie support.
Anyone know a eyxnos model mod? G955F here.
CptUnicorns said:
Anyone know a eyxnos model mod? G955F here.
Click to expand...
Click to collapse
Are you on oreo or pie?
Just a quick search popped up with this it's for oreo but like mine there is strong possibility that exynos oreo mod woulld be compatible with pie. I added another zip to also include a Pie fix for Dolby Atmos i could easily show you what lines to add to floating_feature.xml to make Dolby Atmos work with phone speaakers and not just headphones if you are on pie
https://forum.xda-developers.com/galaxy-s8/themes/dual-speaker-audio-mod-s8-s8-t3738770
Hi guys. I managed to enable Dual Speaker Mod on OnePlus 3/3T on OxygenOS and Android 9 and 10.
Changelog:
v1.0
- First release for Pie
v2.0
- fixed for OxygenOS Pie
- support for custom Android 9 & 10
- Magisk Module
LINK (MIRROR): Google Drive
or Magisk Repo!
Installing:
1. Install module in Magisk Manager
2. Reboot and profit
Please test and report if you having issues here or on Telegram
Reserved
Thank you ! A Magisk module is possible ?
lutherkingmartin said:
Thank you ! A Magisk module is possible ?
Click to expand...
Click to collapse
Soon!
Sent from my OnePlus3T using XDA Labs
Tested it on latest havoc ROM with OP3. Sadly it doesn't work
mrfrantastic said:
Tested it on latest havoc ROM with OP3. Sadly it doesn't work
Click to expand...
Click to collapse
hello, yes doesn't work havoc os latest version. OP3T.
@mrfrantastic @acceslevel are you using another mods like Viper4Android, Dolby or both combined with AML?
For me is working even with Viper4Android installed.
Sent from my OnePlus3T using XDA Labs
IonutGherman said:
@[email protected] are you using another mods like Viper4Android, Dolby or both combined with AML?
For me is working even with Viper4Android installed.
Click to expand...
Click to collapse
Nope, none of them or anything audio related. Also no EdXposed.
Maybe someone else with OP3 can confirm my report.
IonutGherman said:
Hi guys. I managed to enable dual speaker mod on OnePlus 3T (didn't tested on OnePlus 3, but I think is working) with HavocOS 2.7 build 01.08.2019 and is working good. It should work with ROMs based on LineageOS, didn't tested on OxygenOS since LOS team changed some things in mixer_paths_tasha.xml.
Version 1.0
- first release for Pie
LINK (MIRROR): URL
Installing:
1. First backup your original mixer_paths_tasha.xml by renaming it to mixer_paths_tasha.xml.bak
2. Copy mixer_path_tasha.xml (modded one) to /system/vendor/etc
3. Reboot and profit
Please test and report if you having issues!
Magisk version coming soon!
Click to expand...
Click to collapse
In my custom rom already have this file ??? don't know why ( skydragon OS )
baba duy said:
In my custom rom already have this file ??? don't know why ( skydragon OS )
Click to expand...
Click to collapse
Replace mixer_paths_tasha.xml with the modded one.
Sent from my OnePlus3T using XDA Labs
IonutGherman said:
Replace mixer_paths_tasha.xml with the modded one.
Sent from my OnePlus3T using XDA Labs
Click to expand...
Click to collapse
i can't dowload it dead link
baba duy said:
i can't dowload it dead link
Click to expand...
Click to collapse
Try downloading from XDA
Sent from my OnePlus3T using XDA Labs
What are the lines you have changed/ added to the xml?
Ofcourse I can compare, but it would help me for making a script to modify the original xml without replacing it.
Hope you are willing to share your knowledge!
Not working on my OnePlus 3, any media won't play after replacing this with my original xml file.
One of my two sim cards also stopped working.
Workings on oneplus 3 with havoc latest version. Thanks
ShayantanS said:
Workings on oneplus 3 with havoc latest version. Thanks
Click to expand...
Click to collapse
I am also on latest HavocOs. Are you sure it's working?
mrfrantastic said:
I am also on latest HavocOs. Are you sure it's working?
Click to expand...
Click to collapse
Yes bro... 100%. I covered the bottom speaker to check and also brought the earpiece close to ears, it worked.
Only thing which I did was didn't do the .bak option and instead copied the original to main folder and replaced the original with modified one.
ShayantanS said:
Yes bro... 100%. I covered the bottom speaker to check and also brought the earpiece close to ears, it worked.
Only thing which I did was didn't do the .bak option and instead copied the original to main folder and replaced the original with modified one.
Click to expand...
Click to collapse
I used a different file explorer and now it works. I used Total Commander before, fyi.
mrfrantastic said:
I used a different file explorer and now it works. I used Total Commander before, fyi.
Click to expand...
Click to collapse
I will improve the script and will make a Magisk module, but now I don't have time because I work 2 jobs and I am all the time tired and not in the mood to script something.
Confirm that using a root file explorer application, any media content will fail to load, but using the TWRP inbuilt file manager it works just fine. Havoc 2.8
Thanks a lot!
Hello world!
I get this A7 2018, only the audio quality and loudness dont like me, my previous redmi 9t had better audio, so the A7 I thought that would be better than my redmi without dolby, so playing with some files in vendor trying to get a dual Speaker mod (not fully get and no good results i llave it) get with a .xml and trying I get good results for audio :laugh: I want to share it with all you.
Is for stock OneUI 9
With the help of kubura2999 the dual speaker finally worked, the original dual speaker file has an error with the headphones, it doesn't work, so I mixed the work of kubura2999 and my dual speaker and its now fixed, with some extra loudness
Use at you oun risk
Install with magisk and reboot
Thanks for you mixed_paths.mxl @kubura2999
Can you upload the same file, but in a zip?
I cant download the file and i have difficulties to copy and paste the lines on my phone.
kubura2999 said:
Can you upload the same file, but in a zip?
I cant download the file and i have difficulties to copy and paste the lines on my phone.
Click to expand...
Click to collapse
Magisk version ready check post
edwin_ecoral can you test my files in the attachment for double speaker? To check does it work for you and anybody else.
If it does maybe you can include in your magisk zip.
Its not flashable zip in the attachment
Here is the mixer_gain file
kubura2999 said:
edwin_ecoral can you test my files in the attachment for double speaker? To check does it work for you and anybody else.
If it does maybe you can include in your magisk zip.
Its not flashable zip in the attachment
Click to expand...
Click to collapse
Its working but the headphones doesnt work, I take a file that make my dual speaker working without the bug of headphones, thanks for you help
I just saw that you updated your post.
I also fixed my mixer_gain file to work for headphones to
I upload the file instead the double_speaker.zip for you if you want to compare the vaules or if you wana test more.
Or not, it dosent matter when everything works now.
Anyway there is a tweak more if you want to get more from the phone and get dual speaker which makes dolby work with speaker not just with earphones.
Just enter on the end of the floating_feature.xml which is located in sytem/etc this line:
<SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>TRUE</SEC_FLOATING_FEATURE_AUDIO_SUPPORT_PSEUDO_DUAL_SPEAKER>
thanks, but I already had it
Does this mod work on GSI ROMs?
but a7 2018 only have one speaker...
It works well... Good job. Thanks man.
MaxMiMax said:
but a7 2018 only have one speaker...
Click to expand...
Click to collapse
It also utilizes the speaker that is used during phone calls...
MaxMiMax said:
but a7 2018 only have one speaker...
Click to expand...
Click to collapse
It also utilizes the speaker that is used in voice calls.
kubura2999 said:
Can you upload the same file, but in a zip?
I cant download the file and i have difficulties to copy and paste the lines on my phone.
Click to expand...
Click to collapse
Thx for the update, Users appreciate a lot.
Ping me whenever You get time.
GOOD LUCK!
There a modificated magisk module for OneUI 3+ vendors (Basically for TreeUI ports)
Credits: VDavid003 - modificated this magisk module for OneUI 3