[ROM][LineageOS][Android 8.1.0r52][OMS] TugaPower™ 32.0 - ONE Android Development

Ok guys, the time arrived, just pushed O 32.0 trough OTA, this update is the latest one relative to Oreo and TugaPower ROM.
It was a long run, thanks all for the support.
April security patch its included in O 32.0
Rom link: https://tugapower.net/TP/OP1/OREO/TugaPowerO32_OP1.zip
MD5: ec155ff2a19f4139cf80e2bd142bb4c8

Reserved
Bugs report:
Most of the third apps are not being able to acess camera. Will try to debug over the week and see if can fix.
WhatsApp its confirmed working.
Third part camera apps confirmed working beside stock cam.
Camera FV5
Open camera
https://forum.xda-developers.com/showpost.php?p=75983266&postcount=85
Using panorama mode on stock cam will FC cam, bug for the time being, to be able to use cam again just clear cam cache and data prior to open again.

Still downloading!
Can we use twrp-3.1.1-x_tugapower?
Update: I need to use official https://eu.dl.twrp.me/bacon/twrp-3.2.1-0-bacon.img.html
Enviado do meu A0001 através do Tapatalk

DanielFran said:
Still downloading!
Can we use twrp-3.1.1-x_tugapower?
Enviado do meu A0001 através do Tapatalk
Click to expand...
Click to collapse
Should be just fine. Advise to use latest oficial because not being too much over TWRP the last months, on my device tested with latest oficial 3.2.1-0, but think 3.1.1-x should be still up to the work

Thanks buddy!

Many, many thanks for your hard work on this ROM that I followed on Telegram...

After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Click to expand...
Click to collapse
Quick Question since my device is encrypted. How do I remove the encryption when I have a phone which does not boot?
Much thanks for the ROM

Does anyone know how to get pixel navbar with the animation? I tried looking through substratum themes but the only ones I found are without the animation.

Saplaran said:
Quick Question since my device is encrypted. How do I remove the encryption when I have a phone which does not boot?
Much thanks for the ROM
Click to expand...
Click to collapse
You format your data, factory reset does not remove encryption, format data removes

This rom is the best ever Oreo for bacon. Loving it so much:good:

well well well, we have the Tuga Oreo stable now...
gr8 work mate..
downloading it now shall test and report back..
regards

Great to see this! @danieldmm is this compiled with 64 bit Binder APIs? I'd love to pair it to Thunder Kernel 3s for sultanized camera!
Sent from my A0001 using Tapatalk

The Rom is super fine, love new icon from Lineage. Perfect beauty, only thing missed is color control

It would be nice to have the brightness bar at the bottom, like in lineageOS

pippoaacc said:
Great to see this! @danieldmm is this compiled with 64 bit Binder APIs? I'd love to pair it to Thunder Kernel 3s for sultanized camera!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
LineageOS changed quite long for 64-bit binder.
https://github.com/LineageOS/androi...on/blob/lineage-15.1/BoardConfigCommon.mk#L62
if you try let us know how it goes with kernel
Thanhtho96 said:
The Rom is super fine, love new icon from Lineage. Perfect beauty, only thing missed is color control
Click to expand...
Click to collapse
Color control will be implemented in future rom update.
Macmoc16 said:
It would be nice to have the brightness bar at the bottom, like in lineageOS
Click to expand...
Click to collapse
No idea what you are talking mate, brightness bar in this rom is stock LineageOS, never saw brightness bar on bottom over LineageOS.

Always a pleasure to see you in action, Daniel. Thank you so much for your dedication to the Bacon community!
edit: + updated my ROM index

Can't we install it with TWRP 3.1.0 ... m getting error : 7 while flashing the ROM ... help

gk4218 said:
Can't we install it with TWRP 3.1.0 ... m getting error : 7 while flashing the ROM ... help
Click to expand...
Click to collapse
Need more detail about the error, read all the letters and post what it says, usual prior to the error 7 letters it should have something written.
If you prefer take a screenshot and post here

Timmmmaaahh said:
Always a pleasure to see you in action, Daniel. Thank you so much for your dedication to the Bacon community!
edit: + updated my ROM index
Click to expand...
Click to collapse
Guess you just missed to make the post over that thread saying you updated the index

I also get an error - TWRP-3.1.1-5 TUGA-POWER. (Dirty flash rom - from/over 8.1.0r14 Agent_fabulos)

Related

[ROM][MOD][YOG4PAS1N0] Cyanogen OS 12.1 - Rooted | Cleaned | Small Mods

Android 5.1.1 - Cyanogen OS 12.1 - YOG4PAS1N0
Features:
- Cleaned (see what is removed in attaches)
- SuperSU (because Titanium Backup works better with it)
- Disabled Cyanogen Recovery Flashing
- /system folder, no .dat files
- No Yahoo homepage in Chrome, there was apk for that
No need gapps.
Firmware included.
Really better than Cyanogen OS 12, worth to try.
Enjoy :good:
https://www.androidfilehost.com/?fid=24052804347801673
Kernel untouched, source
https://github.com/CyanogenMod/android_kernel_oneplus_msm8974/tree/stable/cm-12.1-YOG4P
Hello my friend did u include hexo theme and blurred lockscreen as in ur previous version 12 ?
Sent from my A0001 using Tapatalk
scematics said:
Hello my friend did u include hexo theme and blurred lockscreen as in ur previous version 12 ?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yeah, of course they are here
I will give it a try this evening!
Thanks for sharing.
I will give a try too
Sent from my A0001 using Tapatalk
Let's give a spin!
Does it have or will it have multirom support?
lopilop said:
Does it have or will it have multirom support?
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-one/development/kernel-t3186870
How' s the batterylife mate?
madsponge26 said:
How' s the batterylife mate?
Click to expand...
Click to collapse
No info for now, it exist less than 2 hours
Should be as stock, maybe a little better
CraZY_BoY^ said:
No info for now, it exist less than 2 hours
Should be as stock, maybe a little better
Click to expand...
Click to collapse
Maybe ak kernel can help a lot
Sent from my A0001 using XDA Free mobile app
@CraZY_BoY^ this is tempting! Your ROM or mine? Any clues which should I flash?
Flashing is spell wrongly on the first post
I am trying to flash gapps mini 5.1 latest I got error code 40
Is there any recommended gapps to be used with the rom
Thanx
scematics said:
I am trying to flash gapps mini 5.1 latest I got error code 40
Is there any recommended gapps to be used with the rom
Thanx
Click to expand...
Click to collapse
Gapps are included
This ROM look promising.
Is there any performance tweak?
Back
Installation of the ROM is too smooth indeed and works fine.
I did dirty flashing from zero and things are getting excellent so far.
- ROM is supplied with Hexo theme who are interested in.
- Rom is supplied with blurred lockscreen as was in Cyanogenmod 12 by crazy boy.
- ROM is supplied with gapps slims built in as I think .. but need confirmation from crazy boy
I am going to install my staff back as well as xposed installer 71-22 and let me see the progress and update u accordingly.
Thanx Crazy Boy for ur marvelous work and effort.
scematics said:
Back
Installation of the ROM is too smooth indeed and works fine.
I did dirty flashing from zero and things are getting excellent so far.
- ROM is supplied with Hexo theme who are interested in.
- Rom is supplied with blurred lockscreen as well as was in Cyanogenmod 12 by crazy boy.
- ROM is supplied with gapps slims built in as I think .. but need confirmation from crazy boy
I am going to install my staff back as well as xposed installer 71-22 and let me see the progress and update u accordingly.
Thanx Crazy Boy for ur marvelous work and effort.
Click to expand...
Click to collapse
Waiting for your update on working xposed
scematics said:
Back
Installation of the ROM is too smooth indeed and works fine.
I did dirty flashing from zero and things are getting excellent so far.
- ROM is supplied with Hexo theme who are interested in.
- Rom is supplied with blurred lockscreen as was in Cyanogenmod 12 by crazy boy.
- ROM is supplied with gapps slims built in as I think .. but need confirmation from crazy boy
I am going to install my staff back as well as xposed installer 71-22 and let me see the progress and update u accordingly.
Thanx Crazy Boy for ur marvelous work and effort.
Click to expand...
Click to collapse
Blur lockscreen and gapps are part of the ROM in the first place.
What about camera guys?
Enviado do meu A0001 através de Tapatalk

CM Nougat for MT2

This thread can be used for tracking the progress of CM14 for the Mt2?
Note:
https://plus.google.com/u/0/photos/photo/109932426055289104206/6329128826640065154?icm=false
Link is not opening
plus.google.com/109932426055289104206
Nougat for Ascend Mate 2 MTL203
So this post caught my eye... Is someone working on Android 7.0 for the Ascend Mate 2 or is it already out there?
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
shm quit development on this but released the sources
https://bitbucket.org/S-H-M/android_device_huawei_mt2
https://bitbucket.org/S-H-M/android_kernel_huawei_msm8928
Sadly
http://forum.xda-developers.com/showpost.php?p=69194744&postcount=234
ScoobSTi said:
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
Click to expand...
Click to collapse
i think that would be after someone submits a working build.
Unofficial CM14.1
bgcngm said:
https://android.cmphys.com/cyanogenmod-mt2/
Click to expand...
Click to collapse
MT2-User said:
Unofficial CM14.1
Click to expand...
Click to collapse
Stock Camera works. Both front and rear ones. Gallery app works.
DT2W also works!
Clean flash plus Open GApps nano package as shown.
Battery life: with profiles settings as Performance and Tasker running in the foreground.
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
Good to see the great community behind this phone is still developing... Thanks guys... May you have a Happy MT2 New Year...
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
nate5711 said:
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
Click to expand...
Click to collapse
@nate5711: I think this CM14.1 runs more smooth than CM13 (official). It hasn't crashed yet; previously CM13 rebooted occasionally. The battery life is very nice also: 9-10 hours SOT, similar to CM13.
I have been using TWRP by Matt (this CM14.1 Developer) for a while, so I didn't see any problem with it (the previous version is 3.0.M5-0 released on July 19; https://android.cmphys.com/twrp-mt2/). The only thing is TimeService which led to inaccurate time in TWRP, but I always named Nandroid backup myself which is much shorter while with more information. It has been fixed as Matt stated:good:
I did make a Nandroid backup of CM13 using TWRP-3.0.M5.0 and I am sure there is no problem to switch between this CM14.1 and CM13 without loss of data. I tried both clean and dirty flash of CM14.1 (over CM13), and currently I've been running the dirty-flashed one flawlessly. I tried switch between CM14.1 and CM13 with TWRP and there's no problem at all.
Sure, as I mentioned earlier, LiveDisplay night mode doesn't work. There's no CMTE either. Otherwise everything is good on my end.
Thanks to Matt for his wonderful job! :good::good::good:
BTW, Matt has his CM13-Dec 26 nightly available to us also and he said the Camera (CM13) has been fixed. TBH, I haven't tried his CM13-20161226 yet since I am very satisfied with his CM14.1-20161225.
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Sent from my Ascend Mate 2 using Tapatalk
hopkins31 said:
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Click to expand...
Click to collapse
Yes, arm 7.1 GApps required even for dirty flash over CM13.
Thanks for the helpful info, dl the rom and I'm very much enjoying it..
Thank you for providing the latest build. I have installed it and seems to be working fine. Need to use it for a few days to cycle the battery to know how good is the backup.
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
divhandyman said:
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
Click to expand...
Click to collapse
Disable the tap to wake setting under display will stop the camera popping up.

Official onyx CM 14 news?

Hello all,
Does somebody know about official CM 14 if will be soon available for onyx device?
I saw the latest releases are for oneplus 1 and 2 and the only missing device in oneplus is the onyx device.
Thanks in advance for your replies.
It will be available soon..if OnePlus One gets the official nightly then the next is onyx's turn.have patients.
Still some huge bugs to work out with data and camera. If you want a taste of Nougat I've personally tested Aosp-Ext and Tesla-N. Both stable and full functional. Just need footej app for video recording.
Exodusche said:
Still some huge bugs to work out with data and camera. If you want a taste of Nougat I've personally tested Aosp-Ext and Tesla-N. Both stable and full functional. Just need footej app for video recording.
Click to expand...
Click to collapse
Yeah I wanted to check a stable version of Nougat, if its official better than better. O will check both of them. Are they both bor the new bootloader? Thanks for your reply .
ttarze said:
Yeah I wanted to check a stable version of Nougat, if its official better than better. O will check both of them. Are they both bor the new bootloader? Thanks for your reply .
Click to expand...
Click to collapse
Yes. Both are available for the new bootloader
ttarze said:
Yeah I wanted to check a stable version of Nougat, if its official better than better. O will check both of them. Are they both bor the new bootloader? Thanks for your reply .
Click to expand...
Click to collapse
And for added bonus use either BlackReactor or Arsenic kernel. If your on telegram PM me @Exodusche can send you some files.
Where's tesla n for onyx?
Sent from my Pixel Xl using Tapatalk
gurgao said:
Where's tesla n for onyx?
Sent from my Pixel Xl using Tapatalk
Click to expand...
Click to collapse
You can get the links for Tesla N on Google+
Ashwins CM14.1 build is stable, but I went back to Sultans CM13 because the camera on CM14.1 sucks duck
gurgao said:
Where's tesla n for onyx?
Sent from my Pixel Xl using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/oneplus-x/general/index-thread-oneplus-x-onyx-t3334793
So no volte on onyx?? As it is there for one plus one
Damien3187 said:
So no volte on onyx?? As it is there for one plus one
Click to expand...
Click to collapse
No VoLTE for OnePlus X unless OnePlus release it.
Official CM 14.1 is here ....
https://download.cyanogenmod.org/?device=onyx
I have opx with cm-13.0-20161219-NIGHTLY How I can update it to cm-14.1-20161220-NIGHTLY ? I've tried to update it from the settings, but after reboot phone stuck on first boot screen. Should I do any specific manipulations?
walsash said:
I have opx with cm-13.0-20161219-NIGHTLY How I can update it to cm-14.1-20161220-NIGHTLY ? I've tried to update it from the settings, but after reboot phone stuck on first boot screen. Should I do any specific manipulations?
Click to expand...
Click to collapse
I believe you need to flash it from recovery, and not from Settings.
ubston said:
I believe you need to flash it from recovery, and not from Settings.
Click to expand...
Click to collapse
I've already tried it, from twrp41. And also tried flash cm-14.1-20161220-NIGHTLY-onyx-recovery.img from fastboot.
I think it could run if I make factory reset, but I don't want loose data(reinstall apps, configure it), I just want update. Maybe, I can do backup, then factory reset, then install cm14, recover backup? So, for this variant, what data I need to backup?
Official CM14.1 Nightly is now live for Onyx > https://download.cyanogenmod.org/?device=onyx
walsash said:
I have opx with cm-13.0-20161219-NIGHTLY How I can update it to cm-14.1-20161220-NIGHTLY ? I've tried to update it from the settings, but after reboot phone stuck on first boot screen. Should I do any specific manipulations?
Click to expand...
Click to collapse
I think the kernel is faulty in this version because it doesn't boot for me either. I updated from the last unofficial version to first nightly and got stuck at 1+ logo bootanimation.
Ok, I started it with:
1. http://forum.xda-developers.com/oneplus-x/general/guide-deep-sht-guide-to-upgrade-t3494243
2. http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
but I think it's laggy, Settings freezes, administrative menu freezes. So, I'm back to last cm13.
walsash said:
Ok, I started it with:
1. http://forum.xda-developers.com/oneplus-x/general/guide-deep-sht-guide-to-upgrade-t3494243
2. http://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
but I think it's laggy, Settings freezes, administrative menu freezes. So, I'm back to last cm13.
Click to expand...
Click to collapse
Is ur bootloader updated
Sent from my Pixel using Tapatalk

Nitrogen OS 7.1 with substratum

Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Yogendra Kher said:
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Click to expand...
Click to collapse
Have you tested the rom?
Tested a bit, looks really great! (Installed the jan02 rom and after the fingerprint fix)
Use the stock Google camera and working good, taking pictures (sometimes out of flash, but avarage good), recording video in 4k without problem.
When make a call the phone go to "do not disturb", after the call get back to normal.
In the rom have minimal usefully options to mod, by the way we have a very good and simple AOSP experience.
Only used 30 minutes, but the battery only fall 3% (I know, no syncing a lot of apps, only installed and checked a few, but it's good)
Don't test the vulcan api, because don't install gapps, just only some apps for testing.
So thanks, I think this rom on my top 3!
Its in testing from what I can see.
I was using it all day yesterday and I must say its amazing. No cam or flashlight issue.
I had a 3-4 random reboots though. Hope that gets fixed soon.
Here are some screenshots
Tested it. Have to say its a great rom, probably the best for me! Goodix fp is working without any patches. Camera and flashlight work, but still buggy same like other nougat roms.
Not sure whether vulkan api is working.
adizz4 said:
Its in testing from what I can see.
I was using it all day yesterday and I must say its amazing. No cam or flashlight issue.
I had a 3-4 random reboots though. Hope that gets fixed soon.
Here are some screenshots
Click to expand...
Click to collapse
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
ASDFking said:
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
Click to expand...
Click to collapse
http://xyyx-dev.ru/nitrogen-os/testing/nougat_7.1/kenzo/
ASDFking said:
Is there an official thread or guide for it? For kenzo, as the link provided is for Mi3 and Mi4.
Click to expand...
Click to collapse
There's no official thread at the moment AFAIK. I'm sure it'll be up once the testing is done.
But the test builds are mentioned above in case you want to give it a try.
irul.monster said:
Tested it. Have to say its a great rom, probably the best for me! Goodix fp is working without any patches. Camera and flashlight work, but still buggy same like other nougat roms.
Not sure whether vulkan api is working.
Click to expand...
Click to collapse
What about volte. And can you click hdr in google camera. Someother changes from cm.
No other changes...pretty good, but not as lineage currently
Yogendra Kher said:
Hello Devs....
I found one thread in MI official forum about Nitrogen OS 7.1 with substratum stable.
Please refer below link & tell whether is it possible to port for our RN3 Pro.
It has lots of customization options.
Here is the link:
http://en.miui.com/thread-417072-1-1.html
Waiting for reply.
Thanks in advance.
Click to expand...
Click to collapse
I think this thread should be in kenzo Roms section
http://xyyx-dev.ru/nitrogen-os/testing/nougat_7.1/kenzo/
where is the officialy forum for kenzo on to rom nitrogen os
Cant flash SuperSu 2.79..??? is the rom prerooted..??
$lim $hady said:
Cant flash SuperSu 2.79..??? is the rom prerooted..??
Click to expand...
Click to collapse
yes
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Minions007 said:
yes
Click to expand...
Click to collapse
There is no root option under developer options.. and i wont get the supersu icon when i flash the supersu 2.79 zip
$lim $hady said:
There is no root option under developer options.. and i wont get the supersu icon when i flash the supersu 2.79 zip
Click to expand...
Click to collapse
I am using the latest build and it has phh's superuser.
There is no need to flash supersu 2.79 zip root is avilable already
manudhomra said:
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Click to expand...
Click to collapse
everything working fine camera video volte out of the box xender(for file sharing) substratum battery life very good . I used it since 4 days faced not a single reboot. very stable.
sometime flashlight from toggle not working and with camera also.
manudhomra said:
Can anyone provide full review of this ROM. Anyone who is using latest build. Full feedback will be highly appreciated.
Click to expand...
Click to collapse
custom header are available,have not seen them in any nougat except Nitrogen os uptil now but no animation are available :good:

[ROM][LineageOS][Android 8.0.0r30][OMS] TugaPower™ 1.0 RC

Build 2017/11/12 #OPO
TugaPower ROM G+
Telegram Group: https://t.me/TugaPowerOPO
#TugaPower O 1.0 RC LineageOS #laos #OnePlus #Android 8.0.0 #OMS #SubstratumRootLess
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
Please be sure you are using one TWRP that can handle firmware flash. ( http://forum.xda-developers.com/oneplus-one/development/unofficial-twrp-3-0-x-tugapower-t3398366 )
Also be sure you are using proper firmware. The one recomended its the one from cm 13 nighly, you can find here: https://meocloud.pt/link/c1d9a297-e3f7-480b-9567-1bc601c073dd/TugaPowerFirmwareCM13_v4.zip/ , altough people also have good results using the c7 firmaware
Relative to gapps, testing open gapps 8.0 nano package, working without issues
http://opengapps.org/?api=8.0&variant=nano
Replaced built in OTA by OTA Updates app ( https://github.com/MatthewBooth/OTAUpdates )
V4A for the time being its not working so its removed.
Kcal Support ( use Color Control app to adjust colors )
Gello removed and replaced by latest TugaBrowser ( built in OTA for the Browser ) ( blocks ads and protect privacy)
TugaBrowser -> http://forum.xda-developers.com/android/apps-games/app-tugabrowser-t3472457
Call Record ( Not yet ported )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616 )
No more need to make microG system app
Kernel permissive
PoGO: Gonna catch then all
Full support to Substratum OMS RootLess without Andromeda
Powered by Magisk root v14.x and Magisk Manager 5.0.x versions
Replaced Trebuchet with latest Lawnchair beta ( https://github.com/Deletescape-Media/Lawnchair )
What does not works:
Check post 2
Let me know to add there
Also make a clean install, do not attempt to flash over Nougat rom or other based OREO roms, it will probably fail or have problems.
Change log O 1.0 RC:
Android r30
November Patch
Initial build of TugaPower ROM based on Lineage Oreo
Stuff will be added in future, little patiente, also be in mind this is a Release Candidate and stuff could be not working at all.
Report if you find something not working.
Thanks all for the support.
Download: https://androidfilehost.com/?fid=745849072291688147
MD5: 9c4f663a02943d111d7325db3c19f396
Please dont mirror for now the roms zips, thanks
A big thanks to @jhalayashraj for the help and patiente
Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/Fabulous-Oreo/device_oneplus_bacon
Kernel:- https://github.com/Fabulous-Oreo/kernel_oneplus_msm8974
Bugs
Buttons configuration its not possible.
Use apk as workround to config
https://play.google.com/store/apps/details?id=com.irishin.buttonsremapper
Privacy Guard does not work.
Block orientation in horizontal does not work
Tips:
https://forum.xda-developers.com/showthread.php?p=74496475
Woww first one to comment..downloading the rom right now
Damn, I've been eagerly awaiting the Oreo ROM blessed by Daniel. Thanks man, can't wait to get it flashed.
Awesome work. Thanks.
Does this require a clean flash? It would it work a dirty flash over N52?
Sent from my A0001 using Tapatalk
Thanks for this awesome Oreo ROM! :good:
Downloading now. . .
KlotX said:
Awesome work. Thanks.
Does this require a clean flash? It would it work a dirty flash over N52?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Clean flash needed....
slimbullet said:
Clean flash needed....
Click to expand...
Click to collapse
Thanks
Sent from my A0001 using Tapatalk
are there any known bugs?
camera is oos?
lilzad said:
are there any known bugs?
Click to expand...
Click to collapse
Buttons for now are not configurable...
BB~ said:
camera is oos?
Click to expand...
Click to collapse
Camera is using sultan blobs, because its the only one for now that works on oreo
Daniel, not the hero we deserve but the hero we need!
Please
can i use the data backup from N52 after a clean flash?
Or should i create new datas?
danieldmm said:
Buttons for now are not configurable...
Camera is using sultan blobs, because its the only one for now that works on oreo
Click to expand...
Click to collapse
Wait so cm blob doesn't even work?
ludskyrider said:
Please
can i use the data backup from N52 after a clean flash?
Or should i create new datas?
Click to expand...
Click to collapse
Everithing that its system related do not backup/restore, its asking for problems, user apps and user apps data should not be an issue.
DeadFox-xda said:
Wait so cm blob doesn't even work?
Click to expand...
Click to collapse
Over Lineage camara would not even work.
danieldmm said:
Everithing that its system related do not backup/restore, its asking for problems, user apps and user apps data should not be an issue..
Click to expand...
Click to collapse
Well, i was just talking about a data backup
Wooooowww Tuga power
danieldmm said:
Camera is using sultan blobs, because its the only one for now that works on oreo
Click to expand...
Click to collapse
I'm afraid that's not entirely true.Aex oreo is not using sultan's hals and camera still works fine except for the video recording,which is bound to fix soon.
Mr.Ak said:
I'm afraid that's not entirely true.Aex oreo is not using sultan's hals and camera still works fine except for the video recording,which is bound to fix soon.
Click to expand...
Click to collapse
Good for him, even on mine was facing the video recording issue, the fix was easy on my case.
Just need to change some paths of audio.
Code:
$(LOCAL_PATH)/audio/audio_platform_info.xml:system/vendor/etc/audio_platform_info.xml \
$(LOCAL_PATH)/audio/audio_policy.conf:system/vendor/etc/audio_policy.conf \
$(LOCAL_PATH)/audio/mixer_paths.xml:system/vendor/etc/mixer_paths.xml
Its all moved to vendor folder in my case. This fixed audio sound problems and video camera recording.
first of all, thanks for developer, it is the step forward and anyway like it or not, it just another one rom at the popular base (oreo), so we can think that our device is still not forgotten. 3 oreo roms here,,,
then i'd like to share my exp with this rom.
- it's very fast and simple to install, i've just flashed twrp under my cm13 and wiped data, cache and system, no storage wipe, no format. just a few moments and it works without boaring startup wzrd.
- i've got less SOD situations at first use. may be i can see it after installantion of progs (and their services), but other roms (except stock) shows much worse results, and i even suppose i'll be able to use it in casual life (no custom roms can do it before: hydrogen 7.12., flyme 6. oreo - even didn't started properly).
- the fail is that the buttons are not configurable, i hope i can use something like mi-pop or other soft-button app.
- i see, there are some other bug can be, there is a first build, so, feel free to write you first looks.

Categories

Resources