Does anyone else here loose ALL IPv6 connectivity on their S9 after the screen is off for 10-20min? Toggling WiFi Off/On fixes it.
All other devices on my network (including iOS and other wireless ones) have no trouble keeping a IPv6 connection.
Note: IPv6 Service is DHCPv6 with PD provided natively by my ISP.
i do.
the ipv6 client on s9+ seems problematic.
shoulda receive ipv6 advertise accordingly
Related
I got my HTC Hero on Orange in the UK last week.
I am getting an issue where a normally stable wireless network will be knocked out if i connect the Hero on Wifi.
I know its not the radio - connects fine on WEP secured work network and on the open connection on the train and at McDs
I have done a fair bit of googling and RTFM and basically found lots of router specific issues on Android phones but nothing that looks like the same issue i have encountered except one on the Android community forum where no one has a solution or suggestion i havent already tried.
XDA developers was a great help with unlocking and flashing a ROM to my Trion so i thought i would amend the post i made there and see if i get any more expert opinion on here. Apologies for the length of the post - will post ROM and build numbers if that helps (and someone tells me where to look on the phone!)
Conscious this is a lenghty post (hello all!) but thought as i struggled to find anything it might help others in the same situation if i detail the issues and what i have looked at and hypothesised that i need to try to resolve this - in case anyone else has similar issues.
Netgear DGFV338 ADSL and Ethernet VPN & Firewall router.
Three wireless laptops and Sony Ericsson G900 all connect fine
Laptops run XP Pro, Windows 7 RC and a dual boot Vista/Ubuntu machine
desktops (all on gigabit backbone) run similar mix but only lose internet after router and modem have borked.
I am running this on a 20 MB Virgin connection which is usually faultless (3 years or so uptime not counting upgrades to the modem). Speed or timeout is not an issue - usually get between 12MB and 17MB DL and 700kbps UL
As soon as i connect with the Hero i can use the Wifi but briefly (one web page, start to load Market etc) - basically network detected and WPA-PSK TKIP connected, IP allocated and showing in wireless clients table of router.
I was running restricted MAC access and IP/MAC binding as i have ports open for the 360's and the Wii and want to restrict access to these devices only but removed this as part of the troubleshooting.
Shortly afterwards 20 seconds to 1 minute after connection the wifi drops - all connections lost, laptops lose connections and i lose connection to Virgin. It requires a full reboot of modem and router with the Hero off to recover a connection.
I wiped the router and all the security and all the other pcs etc work fine
then turn on hero - same story. So its not any of my more esoteric and paranoid router settings - i dont think.
Been on the Netgear forums and apart from some issues with the G1 and AES on home routers (mine is the full enterprise kit metal case) i find nada
Troubleshooting to date has narrowed it down to a couple of choices.
I know my router but i am brand new to this phone so some of this is pure guess work. One suggestion was ARP floods from multiple requests from phone getting it blocked by the firewall. Except traffic logs dont support this
Encryption support:
I use WPA PSK TKIP - this is detected as WPA Personal by the Hero but it can connect to router when i use the pass and this setting so i am working on the basis this is supported and correct.
I have read about issues with poor AES support on some routers which are fixed by a firmware update but have the same issue with other devices on AES so would prefer TKIP. So it could be encryption handling - initial connection works but error logging could crash the router if this is not working correctly
Anybody know if the WPA personal listed for connections is TKIP or AES?
I cant find any clear information on this.
Orange DNS or restricted gateway settings:
This appears to be the main symptom - i lose DNS support and therefore access to the internet. Turning off the Hero and reconnecting the laptop gives me access to the router but i need to reboot the modem to get my IP back (dynamic but changes every 12 months or so) the hypothesis is that the Orange connection in this build has the DNS hardcoded to go through their DNS servers which either Orange or Virgin systems dont like and boots my connection off the internet. Bit of a long shot but as i cant seem to find any way to fix static IP or DNS listings it could be the case as i cant switch to OpenDNS as i would to test this otherwise.
Only comes to mind as the first day with the phone (when Orange 3G was not active) i didnt have this problem - wifi on phone and laptop worked fine and both together
Bit of a longshot but the symptoms point to a DNS corruption if it isnt my router treating repeated WPA or DNS requests as a DOS attack. It could be DHCP creating errors but i can bind a MAC to specific IP to override this on the router. It sees the Hero, recognises the MAC and adds it to the restriction whitelist.
I havent checked ARP logging but that theory could pan out as its unlikely DNS would take down the router and modem - ARP or DOS lockdown could.
WiFi Channel
I run channel 11 due to neighbours wifi interference - Wii wont work at all with default channel.
I cant find the default channel information on the Hero but would assume it is 6 like most devices.
this one is strange - if it is the Wifi Channel then seeing the router should be a problem and connection shouldnt happen at all. It seems unusual to allow a connection but then crash the router as it is getting traffic on a different channel.
Could be another side effect of my routers firewall blocking suspicious traffic but seems unlikely.
As you can see a fair amount of things have been tried and i am still getting nowhere.
I need to try the encryption settings - does anyone know what the WPA setting is on the Hero and which encryption is supported/offered as standard?
I need to try changing my router back to channel 6 - does anyone know the default channel or how to change this in the Hero?
I need to try static rather than DHCP (but on the phone as already have tried forcing IP from router) - how do i get to these settings?
I need to try static DNS rather than Dynamic (router proxy of Virgin DNS)
I do have a Linksys WRT54g (three of them - one vanilla, one Sveasoft and one Tomato) which i use for outside events at work so i could swap one of those in but i suspect its a combination of Hero settings and router settings and i would like to get my main router set up (and keep the 8 ports) than swap back to the older WRTs and have to set up my Xbox 360s to get around the issue they have with being on a switch with a different subnet and not connecting to Windows 7 media centre
Basically i have tried most of the things i can try with the access i have on the phone and my knowledge of its default settings. What apps can i try to give me control of the networking and access section?
Otherwise, loving the phone. Better than the reviews and whilst not lightning fast its a damn sight quicker than an overclocked Trion i was running before (which worked fine on the same router and WPA Personal)
I am liking Android, glad to not be locked into the Apple tax/ecosystem and realising that WinMo has a looong way to come; even with the help HTC and xda developers offer to make better use of the hardware.
But i am heavy internet user and i cannot risk running my Hero at home on 3g when i have 500MB cap and a £3 a MB over limit charge with no notice from Orange to say i am near limits.
Any ideas? feedback? similar tales of woe?
Possible solution
Ohkaaay - found advanced settings so that helped! n00b error
Removed all security.
Changed channel to 6
connects
change to channel 11
connects but crashes router
reboot router and modem
change back to channel 6
change security to WPA Personal AES
connects
doesnt crash router
change to channel 11
connects
doesnt crash router
i appear to have a working connection and there is no way i would have made it through this post with the Hero on before i made these changes
weirdly i now have two identical entries in the wireless networks list
one says SSID_name Connected
two says SSID_name WPA Personal
remove remembered networks
Hero autodetects my SSID_name
sign in with AES password
two listings in wifi list again, same as before.
So it looks like WPA TKIP doesnt work on my router with Hero
AES does.
Channel 6 works with no security
Channel 11 doesnt
BUT... enable AES and Channel 11 works.
Guess the Channel 6 signal issue interferes with the TKIP or something
But i can report that on Netgear router WPA Personal AES works ok, which apparently on the pre-Cupcake G1 was a known issue.
Apologies to post and then reply to my own post but this might help someone
I can confirm your findings regarding WPA + TKIP vs WPA2 + AES.
I was running WPA + TKIP on a Linksys WRT54GX and experienced major connectivity issues with my Hero (although is did not crash the router). Did not experience this problem with my iPhone 3G.
Changed configuration to WPA2 + AES and Hero does now work without any issues.
I know this:
A. Is fairly obvious
and
B. Is not particularly helpful to you
However - if any device (regardless of whether it is buggy or not) is crashing your router, the router clearly has buggy firmware itself and is at fault. Router firmware should be robust to the unexpected, especially on wifi as this could be prone to denial of service attacks from anyone happening to be walking by. A router that is crashed by an attempted client connecting is a bad sign.
My personal advice would be to change to a decent standalone router. I use a Buffalo WHR-G54S flashed with Tomato firmware v1.21.8005 (with a seperate linksys Adsl2+ modem to provide internet). It is working flawlessly for me in WPA + TKIP/AES with no issues.
Hi,
I'm trying to connect from a host (PC or other) to a mobile cellular Android device on the Verizon/AT&T cellular network. This device uses only the 3G network and has its Wi-Fi turned off. The Android device has a listening socket and I need the remote host to be the connection initiator. As far as I know, Verizon/AT&T uses NAT traversal for mobile phones and assigns local IP addresses to them on the cellular network. This prevents me from initiating a connection to the device from a remote host. Please correct me if I'm wrong about that.
With the usage of IPv6 assignments there shouldn't be any practical limitation (virtually unlimited) to the number of "real" IPs that can be assigned.
Therefore my questions are:
1. Does the Verizon/AT&T cellular network support IPv6 and assigns IPv6 addresses to capable Android devices?
2. Is it a feasible solution to this problem?
3. Does Android 2.2+ have enough support for IPv6 to implement such solution?
I am aware of other methods that can be used, such as C2DM, but it has some drawbacks (such as unknown response time) that prevent me from using it.
Thanks.
This works on T-Mobile with the Nexus S. ICS brings 3G IPv6 support to the Nexus S, and T-Mobile has an IPv6 beta. On that beta program, you sign up for IPv6 and made inbound connection to the phone, which has a public IPv6 address.
FYI to other Linksys firewall users and network admins...
I've run into a problem with the SPI firewall on the EA series of Linksys routers. With the SPI Firewall enabled, push notifications for Android devices on WiFi never make it to the device. Thus things like Google Voice only notify upon sync (i.e. every 5 minutes or whatever interval is set).
After upgrading the firewalls in 2 of our offices from TomatoUSB powered units to new EA4500 routers, users started complaining about their phones no longer receiving notifications in a timely manner.
So far I've tested it with the EA4500 and the EA4200v2. My assumption is the problem will affect any EA series router as they share similar code for the SPI Firewall feature.
My guess is that the firewall is overly sensitive to inbound requests to the devices behind the firewall and blocks what it thinks is unsolicited traffic.
To resolve the problem and allow Android devices to successfully receive push notifications when connected to WiFi on these units, disable the SPI firewall for IPv4 (and IPv6 if it's in use).
In the new Cisco Connect Cloud version of the firmware for these, that setting is located in Security -> Firewall.
I have been looking for causes of drop-outs when listening to internet radio and have enabled the WMM setting on my router. I also found and enabled the WMM settings on my PCs but I cannot find anything in the Android space that would also enable this facility. I understand that it has to be enabled at both the router and client end for the QoS to work properly. Does such a setting exist?
Thanks
This is interesting. So I changed TTL to 66 (not 65) in hopes that it would speed up through a router, bouncing the packet twice. It throttles through router but not through direct connect to computer. I would think direct connect would throttle too. I'm not sure if IPV6 disable apps are doing anything, shows public IP IPV4 through the hotspot but through phone directly shows a IPV6 address.
I think VPN would work, but besides VPN would the packet reduce twice through a router? They must be able to detect a router somehow. VPN should solve that but was wondering if my reasoning is correct.
I'd like to set up a permanent VPN in the router so looking into that also. I have a cradlepoint MRB1200 and I cannot get it to work with VPN unlimited.