Viper OS ROM 3.1.1 - 7.1 N BETA
For InnJoo i2 [DUAL SIM FUNCTIONAL]
I am not the original developer so I do not take any credit in making this ROM
This ROM has been powered by the developer team who made this ROm
the original ROM can be found at / from - http://techboxlab.com/mt6592-nougat-7-1-viper-os-custom-rom/
Instructions :-
1. Please use only Philz or TWRP recovery, havnt checked on CWM
2. Please have a full nandroid backup of your current rom before you flash
3. Copy ROM & GAAPs on SD Card
4. Please ensure you are doing a clean install of the rom. Check advance wipe/Erase all, except SD card
5. After install the ROM,flash GAAPS and then let the ROM boot up.
6. Let the ROM boot up, it will take 6-8 minutes. Once it boots up you will see optimizing apps screen notification.
7. After boot up, set the device and SD card (in MM +above Roms, you need to check approve access for SD card)
8. You can install Xposed zip and other Mods you feel fit. (Plz ensure system space is available)
9. Happy flashing
Below is the link for the ROM
https://drive.google.com/open?id=1mEXOy1gwS83CqlAMJIkDH2QLo075TrO0
GAAPS
OpenGaaps arm_7.1 (pico recommended)
Please feel free to visit and thank the developer
No Bugs
USSD code is working
SMS working
3G working
Stock Camera (Front& Back) working - sometimes
Footej Camera included
Greenify included
Xposed installer included
Substratum included
YouTube working
Ok Google Mic is working
Off Mode charging is working
Battery removal, changing sims, low battery off will not result in Boot loop so no more wipe cache required
Let me know if someone is unable to flash or has any other issues/bugs
PO: For Root, please install SuperSU separately after flashing ROM
I can't found any gapps plss provide the link plss
Not working on innjoo i2
Related
Cyanogenmod 11.0 for Huawei Mediapad 7" (S7-30Xx)
Be aware that im not responsible for any damage that can cause this rom!!!
Working:
- Radio;
- Data connection;
- Touchscreen;
- Sensors;
- Wi-fi;
- AGPS;
- Usb connection to PC (mtp/ptp);
- GPS;
- HDMI;
- Sound;
- Microphone;
- Video playback;
- Camera;
- Bluetooth.
Features:
- Support bludroid stack
- Battery tweaks
- Selinux supported
- Usb disk (vfat, fat32 )
Download
ROM: http://goo.im/devs/zyr3x/cm//cm-11-20140118-UNOFFICIAL-hws7300u.zip
GAPPS: http://www.mediafire.com/download/0kd1p01a5kzpocx/mini-kk-gapps-20131203.zip
Instructions: !!!Be aware that im not responsible for any damage that can cause this rom!!!
1. Be sure that you have installed 4.0.3 stock official rom from huawei.
2. Now you need to install TWRP/CWM recovery.
To do it download zip with Automated installer of TWRP/CWM/STOCK Recoveries to PC, unpack it in the place you like on PC, run install_recovery.cmd and follow onscreen instructions.
2. Then download CyanogenMod 11 for Huawei Mediapad, Google apps and place them on your internal or external sd.
3. Boot in TWRP/CWM Recovery, then choose Backup and confirm operation (you will get full backup of stock rom).
4. If you want flash rom on top of previous cm10/pa rom - skip this part and go to 5.
Otherwise If you goes from stock or other rom then Press back to go to main menu and choose Wipe there and choose Factory reset there and confirm operation .
5. Press back again and choose Install, then find downloaded zip rom, choose it and and confirm operation .
6. Press back again and choose Install, then find downloaded zip with Gapps, choose it and confirm operation .
7. Then reboot in system and enjoy CyanogenMod 11 rom on your Mediapad
PLS notice: twrp/cwm recoveries are intended to use with custom roms like cm11/pa/aokp. In stock huawei rom internal memory is mounted to data/shared. But custom recoveries have an option to bypass only internal memory that mounted to data/media. So for stock rom these recoveries will do backup of internal memory during backup and will do wipe during factory reset. But they wont do it for custom roms like cm10/pa etc.
Thanks and credits
to all these great opensource communities, and of course CyanogenMod team and after_silence, bart594
Can't believe im seeing this update coming!
Sent from my Huawei MediaPad using xda app-developers app
What's diffrent with "Evervolv 4.0.0 for Mediapad Public Preview 2 Final" ?
New GPU Driver and CM features
Great buddy you can count on a donation as soon as I'm back from my holidays. Keep the good work
Hey zyr3x,
I've one question:
What about the "battery tweaks" in the "HuaweiMediapad settings"?
How do these tweaks work?
Greets Gunnar
Wow...
Which GAPPS to use...the ones in this thread, in the first post, or the ones for CM11 here:
http://wiki.cyanogenmod.org/w/Google_Apps
It looks like there are more apps in the ones in the link than the mini apps zip in this thread. If we can get the rest from the Google Store, the mini apps is better.
In the link, there's mention of ART compatible for one zip and states that ART should not be enabled for the other. I read up on ART. This is something that will be/is replacing Dalvik. Can anyone explain why one would be ART compatible and the other wouldn't?
I'll probably be trying all of them out, if others don't know.
Thanks.
mastrv said:
Which GAPPS to use...the ones in this thread, in the first post, or the ones for CM11 here:
Click to expand...
Click to collapse
use the gapps which are recommended by the developer. Others are not working correctly. Have tried by myself and finally got everything working so far with the recommended version. Even if the smaller would save space...
Regards,
Xian
hows battery life on this rom? I am using CM10.2 which is giving pretty sub-par battery life compared to stock...
molnartibor said:
hows battery life on this rom? I am using CM10.2 which is giving pretty sub-par battery life compared to stock...
Click to expand...
Click to collapse
Check this post if you are having battery problems
http://forum.xda-developers.com/showthread.php?p=48940619
I've been using this ROM for few days and It's very stable and smooth...
I don't use bloetooth, so this ROM is already the best among all Mediapad's ROM
sharonsym said:
I've been using this ROM for few days and It's very stable and smooth...
I don't use bloetooth, so this ROM is already the best among all Mediapad's ROM
Click to expand...
Click to collapse
hi,
There are stability issues with the battery this rom?
guayaquilander said:
Check this post if you are having battery problems
http://forum.xda-developers.com/showthread.php?p=48940619
Click to expand...
Click to collapse
Unfortunately, I have not solved even by this method ... I believe that it is appropriate to return to the stock 4.0.3 rom
mediapad has poor quality battery, it starts losing capacity after half year
I'm close to three times that and I can see no battery wear.
lucacata said:
Unfortunately, I have not solved even by this method ... I believe that it is appropriate to return to the stock 4.0.3 rom
Click to expand...
Click to collapse
This method look helped to earn 5 hours display time... and I think it will be even more a bit.
thank you very much for your work ... I wanted to point out that the last link of 18:01 does not work ...
zyr3x said:
Cyanogenmod 11.0 for Huawei Mediapad 7" (S7-30Xx)
Be aware that im not responsible for any damage that can cause this rom!!!
Donate:
Yandex.money: 410011398065662
Paypal USD: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=98PJL7RESVVZY
Paypal RUB: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=T6X2PDRARZUKY
Paypal EUR: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=MF4HZYM72724Y
Working:
- Radio;
- Data connection;
- Touchscreen;
- Sensors;
- Wi-fi;
- AGPS;
- Usb connection to PC (mtp/ptp);
- GPS;
- HDMI;
- Sound;
- Microphone;
- Video playback;
- Camera;
- Bluetooth.
Features:
- Support bludroid stack
- Battery tweaks
- Selinux supported
- Usb disk (vfat, fat32 )
Download
ROM: http://goo.im/devs/zyr3x/cm//cm-11-20140118-UNOFFICIAL-hws7300u.zip
GAPPS: http://www.mediafire.com/download/0kd1p01a5kzpocx/mini-kk-gapps-20131203.zip
Instructions: !!!Be aware that im not responsible for any damage that can cause this rom!!!
1. Be sure that you have installed 4.0.3 stock official rom from huawei.
2. Now you need to install TWRP/CWM recovery.
To do it download zip with Automated installer of TWRP/CWM/STOCK Recoveries to PC, unpack it in the place you like on PC, run install_recovery.cmd and follow onscreen instructions.
2. Then download CyanogenMod 11 for Huawei Mediapad, Google apps and place them on your internal or external sd.
3. Boot in TWRP/CWM Recovery, then choose Backup and confirm operation (you will get full backup of stock rom).
4. If you want flash rom on top of previous cm10/pa rom - skip this part and go to 5.
Otherwise If you goes from stock or other rom then Press back to go to main menu and choose Wipe there and choose Factory reset there and confirm operation .
5. Press back again and choose Install, then find downloaded zip rom, choose it and and confirm operation .
6. Press back again and choose Install, then find downloaded zip with Gapps, choose it and confirm operation .
7. Then reboot in system and enjoy CyanogenMod 11 rom on your Mediapad
PLS notice: twrp/cwm recoveries are intended to use with custom roms like cm11/pa/aokp. In stock huawei rom internal memory is mounted to data/shared. But custom recoveries have an option to bypass only internal memory that mounted to data/media. So for stock rom these recoveries will do backup of internal memory during backup and will do wipe during factory reset. But they wont do it for custom roms like cm10/pa etc.
Thanks and credits
to all these great opensource communities, and of course CyanogenMod team and after_silence, bart594
Click to expand...
Click to collapse
lucacata said:
thank you very much for your work ... I wanted to point out that the last link of 18:01 does not work ...
Click to expand...
Click to collapse
Take this one: http://goo.im/devs/zyr3x/cm//cm-11-20140118-UNOFFICIAL-hws7300u.zip
Greets Gunnar
First, thanks for this great ROM. Everything is working smooth.
I have one big problem: My Wi-Fi MAC-address changes every time I switch it on. I tried wiping cache/dalvik and also tried setting a custom MAC in the settings but nothing helped. As I am filtering MACs in my Wi-Fi network it's a real big problem for me.
Has anyone else noticed this too?
Dietrich
hi welcome all.
Presenting to you the a rom filled with Mystic Optimization. The MysticMoD Slim.
This is brought to you after MysticMoD v1.
This rom needs to be installed in a very different manner. Be very careful to follow all details step by step.
Tested on Karbonn Titanium S5
No bugs
Please report bugs here if you find any.
Xposed framework works except for gravity box.
Instructions to install.
1. Flash a clean stock rom without root access.
2. Reboot the phone to home screen(complete the setup)
3. Reboot to recovery Flash the SuperUser.zip file from the attachment.(that is for a reason,if you don't then you will end up with bootloops)
4. Reboot the phone.
5. Again Reboot phone to recovery and Flash MysticMoD_slim.zip
6. Wipe cache/factory reset.
7. Wipe dalvik cache.
8. Reboot and enjoy a Mystified phone.
Cheers
Note:
I am not responsible for any damaged SD cards dead phones and corrupted SD cards. While making this rom I have work hard as to come up with a rom without bugs, tested aggressively so as to give you all a best rom with no bugs and with full power charged package.
For Bloggers
Don't post direct download links in any form on any blogs or any other medium of publication. If you wanna post this Rom then post the link to this post. Posting of direct links is PROHIBITED.
DONOT MIRROR THE ROM.I need the count of downloads
comment your experience with this rom below.
Thanks for downloading.
Downloads
http://www.mediafire.com/?gh6a3359f4li52l
http://www.mediafire.com/?1160bapnmbgpa5a
Hi guys, this is my first port, i am not a developer, i have just followed a rom porting guide.
created by @rishabh.raj37
This Rom is based on lastest CM11 build by jkaz.
Working :
Everything..(Including Headphones)
Not Working :
None
Procedure :
1. Download the Rom and gapps and copy both files in to sd card or ext-sd.
2. Reboot into recovery
3. wipe cache, dalvik cache, data...
4. Install both rom and gapps.
5. Reboot phone...
I am not responsible for bricked devices.
Credits:
Xda
Cyanogenmode team
Pac-man developers
Mokee developers,
@LiquidPlacidity
JKaz
@Jamil69
@umangleekha (For Headphone fix patch)
I take credit only for porting this rom to our device, but i don't take credit any other way...
ROM Download
Gapps
For root access flash zip file from the link
SuperSu
Note:
1. - Just edit the build.prop, find the line: ro.sf.lcd_density = 270 change the value to 320 save it and reboot.
2. - Download system app remover from playstore
- Open it and grant root permission
- select and uninstall nfc service and pac console.
- reboot.
- this removes nfc wake and pac console force close.
Great News.. Thanks Bro, finally another cusrom for Dior.
asrupesh said:
Hi guys, this is my first port, i am not a developer, i have just followed a rom porting guide.
created by @rishabh.raj37
This Rom is based on lastest CM11 build by jkaz.
Working :
Everything..(Including Headphones)
Not Working :
None
Procedure :
1. Download the Rom and gapps and copy both files in to sd card or ext-sd.
2. Reboot into recovery
3. wipe cache, dalvik cache, data...
4. Install both rom and gapps.
5. Reboot phone...
I am not responsible for bricked devices.
Credits:
Xda
Cyanogenmode team
Pac-man developers
Mokee developers,
@LiquidPlacidity
JKaz
@Jamil69
@umangleekha (For Headphone fix patch)
I take credit only for porting this rom to our device, but i don't take credit any other way...
ROM Download
Gapps
For root access flash zip file from the link
SuperSu
Click to expand...
Click to collapse
Thanks for this cusrom bro, i will try it.
There's a nfc wakelock and Systemupdateservice wakelock. Other than that the rom is functional.
Thanks bro, this runs better than mokee and doesn't have shady apps.
screenshot plz...
So far everything works fine.
Bugs:
1) Everytime Wi-Fi is turned on, PAC Console forced close.
2) The resoulution is kinda small & look like tablet.
Maybe I can tweak the build.prop about the resolution.
I can confirm what zahinasaur wrote:
1) PAC Console force closes, but for me, on each boot, but after I disabled it in Manage Apps, it's OK.
2) Resolution looks strange, but it's also OK.
3) New thing: isn't App2SD functionality enabled on this ROM? Can you please package a new version with this functionality enabled?
Besides these, it's works much better than Mokee ROM at least for me, so thank you for your work!
Resolution fix
Just edit the build.prop, find the line:
ro.sf.lcd_density
Change the value & reboot.
Mine works best at value 320. You can try different value.
Thank you, this works. I'm more happy with the 296 setting, but you wrote the correct solution for this problem.
2 problems left.
By the way, not installing SuperSU gives you the default (CM?) SU implementation which works better at least for me, for e.g. BusyBox installation.
1st post updated...
headphone fix
asrupesh said:
1st post updated...
Click to expand...
Click to collapse
Is the headphone fix included in the rom or I have to flash something for it?
and what about system update service bug? - for this I have a solution
download my android tools from play store
in service tab -> system -> google play services -> at the end of the list there is system update service, just disabling it worked for my old phone, which had similar bug...
Hope this helps..
whats new??
Guys, do you see the external SD card?
Ridon OS ROM - 7.1 N
For InnJoo i2 [DUAL SIM FUNCTIONAL]
I am not the original developer so I do not take any credit in making this ROM
This ROM has been powered by the developer team who made this ROm
the original ROM can be found at / http://techboxlab.com/ridon-os-rom-for-mt6592-kernel-3-4-67/
Instructions :-
1. Please use only Philz or TWRP recovery, havnt checked on CWM
2. Please have a full nandroid backup of your current rom before you flash
3. Copy ROM & GAAPs on SD Card
4. Please ensure you are doing a clean install of the rom. Check advance wipe/Erase all, except SD card
5. After install the ROM,flash GAAPS and then let the ROM boot up.
6. Let the ROM boot up, it will take 6-8 minutes. Once it boots up you will see optimizing apps screen notification.
7. After boot up, set the device and SD card (in MM +above Roms, you need to check approve access for SD card)
8. You can install Xposed zip and other Mods you feel fit. (Plz ensure system space is available)
9. Happy flashing
Below is the link for the ROM
https://drive.google.com/open?id=16QEtp8-byFvHLaSpocC629w3tylRkifO
GAAPS
OpenGaaps arm_7.1 (pico recommended)
Please feel free to visit and thank the developer
No Bugs
USSD code is working
SMS working
3G working
Greenify working
Xposed installer working
Substratum working
YouTube working
Ok Google Mic is working
Off Mode charging is working
Battery removal, changing sims, low battery off will not result in Boot loop so no more wipe cache required
Issues
Stock Camera (Front& Back) is a Hit or a Miss. Not working at times
Let me know if someone is unable to flash or has any other issues/bugs
PO: For Root, please install SuperSU separately after flashing ROM
hello guys I share my new rom for the samsung A20 it is compatible with all the variants except the U variant...I am not responsible for dead phones or bad installation do this at your own risk ...
*FEATURES
*Based Samsung S20 Fan Edition
*Support A205xx (less A205U)
*One UI 2.5
*Zipaligned
*Debloat
*Patch September
*Root Magisk(M2D)
*Kernel Minkha 14.3
*Some features of one UI 2.5
*Wallpaper S20 Fan Edition
*MTP Connection (Connect To Laptop via USB Without Any Confirmation Pop Up)
*you can use spotify as added alarm
*Audio enhancements V2 thanks to Yasir
*improvements for better battery life and performance
*Optimization HQM
*Semi deodex in some applications
*Animations S20 Fan Edition
*LiveDrawing in Gallery S20 Fan Edition
*Wireless PowerShare Add
*Link to windows Add
*GPU Booster improved
*fixed error when saving contact
*Other things I don't remember now
*IMPORTANT
The rom is more focused on optimization, fluidity and performance, it has a very deep debloat and some functions are lost that I did not see as very necessary. I clarify this so that later, no complaints, the rom is working very well and without errors.
*HOW TO INSTALL
start in twrp and make wipes
flash ROM
installation takes about 2 to 3 minutes
enjoyment
*BUGS
let me know
*DOWNLOAD ROM
https://androidfilehost.com/?fid=8889791610682941931
*FIX
download and unzip the zip fix and add the apk in system / app and grant the necessary permissions
https://androidfilehost.com/?fid=8889791610682942252
*CONTRIBUTION
@minhka98
@Soul_broker_1441
*Paypal https://www.paypal.me/gollo11
PayPal in case you want to donate a coffee to me
nice!
Upgrade from Zrom v3 to v4 on a20
https://forum.xda-developers.com/galaxy-a20/development/z-rom-q-v4-t4166017
Before you start copy files from internal to SD card and unzip the fix.zip
1. Backup data
2. Wipe caches, boot, data, system
Install Rom
Copy fix files to system/system/priv-app
3. Format data
4. Install dmverity
5. Wipe caches
6. Reboot to recovery
7. Reboot
8. Wait a long time
9. Skip everything
10. Reboot to recovery
11. Restore data
12. Reboot
I might give this a go later today. Thanks!
might give this a try first. i haven't even tried flashing any customization on my A205GN yet. still on stock debloated and rooted android 10
What is the difference between Z-ROM Q V4 and Z-ROM Q V3
The WiFi hotspot login page not show.
Upgrade from Zrom v3 to v4
1. Backup data
2. Wipe caches, boot, data, system
3. Format data
4. Install dmverity
5. Wipe caches
6. Reboot to recovery
7. Reboot
8. Wait a long time
9. Skip everything
10. Reboot to recovery
11. Restore data
12. Reboot
Nice bro, will try later, though hope Sir @Gullo consider bluelight filter, adaptive brightness and possibly dynamic lockscreen wallpaper
Upgrade from Zrom v3 to v4 on a20
https://forum.xda-developers.com/galaxy-a20/development/z-rom-q-v4-t4166017
Before you start copy files from internal to SD card and unzip the fix.zip
1. Backup data
2. Wipe caches, boot, data, system
Install Rom
Copy fix files to system/system/priv-app
3. Format data
4. Install dmverity
5. Wipe caches
6. Reboot to recovery
7. Reboot
8. Wait a long time
9. Skip everything
10. Reboot to recovery
11. Restore data
12. Reboot
Does the ROM have AOD (always on display)?
walisson836 said:
Does the ROM have AOD (always on display)?
Click to expand...
Click to collapse
This ROM is debloated.
Use Ultimate Q if you want AOD
https://forum.xda-developers.com/galaxy-a20/development/ultimate-q-s20-v2-rom-t4104667
can't update to magisk 20.4? bootloop after flash on 20.4.
sinkoo1979 said:
can't update to magisk 20.4? bootloop after flash on 20.4.
Click to expand...
Click to collapse
You need to change kernel to one that uses 20.4
Flashed success and well debloated ROM. tried flashing other custom kernel and update magisk always ended with bricked phone.
Just finished rebuilding phone on Australian Sept update ROM and then installing Z-Rom V4 and Eureka V4.3 kernel with Magisk 20.4.
Everything is working as expected. Eureka v4.3 can run magisk 20.4 from the word go.... no need to install 20.3 first... just install kernel and magisk 20.4 in one hit. No bricks providing you do the FORMAT (not wipe) /data and dmverity straight after install of Z-ROM.
V5 coming soon
physwizz said:
V5 coming soon
Click to expand...
Click to collapse
Please could you confirm this error in phone app. Go to phone app/recents tab, click any recent call to show call details/history the phone app crash after few seconds. Thanks
SHEHUU3 said:
Please could you confirm this error in phone app. Go to phone app/recents tab, click any recent call to show call details/history the phone app crash after few seconds. Thanks
Click to expand...
Click to collapse
Yes
This happens to me too
physwizz said:
Yes
This happens to me too
Click to expand...
Click to collapse
Hope it will be fix in the next version.
Otherwise the rom is very smooth even with the default kernel