Hello everyone!
I bought a Meizu Pro 7 recently and unfortunately I happen to have bricked it.
When I received the phone, it was using the 6.3.0.0A firmware (so it was Chinese) and I wanted to change it to 6.3.0.0G.
I followed a tutorial on chinahandys.net in order to do it, and it worked! (I cannot post the link since I am a new user on xda but it is called "Install Global ROM on chinese Meizu Pro 7")
But now I turned it off, and now when I try to turn it on, the Flyme logo shows up and it keeps loading for forever.
I tried accessing recovery mode by pressing volume down + power and this is what I get (this is the same screen that shows up when you boot the phone normally, but at the bottom of the screen it is written "=> Fastboot mode(sec,lock,rooted)"):
up.kuraip.net/0515P8dy3984.jpg
Do you have any idea how I could fix this issue, I just bought the phone and I don't really know what to do to fix it :'(
Kuraip said:
Hello everyone!
I bought a Meizu Pro 7 recently and unfortunately I happen to have bricked it.
When I received the phone, it was using the 6.3.0.0A firmware (so it was Chinese) and I wanted to change it to 6.3.0.0G.
I followed a tutorial on chinahandys.net in order to do it, and it worked! (I cannot post the link since I am a new user on xda but it is called "Install Global ROM on chinese Meizu Pro 7")
But now I turned it off, and now when I try to turn it on, the Flyme logo shows up and it keeps loading for forever.
I tried accessing recovery mode by pressing volume down + power and this is what I get (this is the same screen that shows up when you boot the phone normally, but at the bottom of the screen it is written "=> Fastboot mode(sec,lock,rooted)"):
up.kuraip.net/0515P8dy3984.jpg
Do you have any idea how I could fix this issue, I just bought the phone and I don't really know what to do to fix it :'(
Click to expand...
Click to collapse
Did you join the Flyme Forum? there is a lot of information there on problems flashing the Pro7. There are different model numbers. My Pro7 has the H version with the latest G version rom. I think that there is an A version Pro7 which is for the Chinese market and there is a specific G rom for that phone.
Kuraip said:
Hello everyone!
I bought a Meizu Pro 7 recently and unfortunately I happen to have bricked it.
When I received the phone, it was using the 6.3.0.0A firmware (so it was Chinese) and I wanted to change it to 6.3.0.0G.
I followed a tutorial on chinahandys.net in order to do it, and it worked! (I cannot post the link since I am a new user on xda but it is called "Install Global ROM on chinese Meizu Pro 7")
But now I turned it off, and now when I try to turn it on, the Flyme logo shows up and it keeps loading for forever.
I tried accessing recovery mode by pressing volume down + power and this is what I get (this is the same screen that shows up when you boot the phone normally, but at the bottom of the screen it is written "=> Fastboot mode(sec,lock,rooted)"):
up.kuraip.net/0515P8dy3984.jpg
Do you have any idea how I could fix this issue, I just bought the phone and I don't really know what to do to fix it :'(
Click to expand...
Click to collapse
Hold Volume Up + Power to get into recovery mode, Volume Down + Power = Fastboot Mode
Related
I got new Huawei Ascend G600 phone from China which is sold under China Unicom.
Since it was chinese version and I tried to installed the Custom ROM. I tried [email protected] which worked very well on the mobile. Of course, it work after unlocking the bootloader and rooted the phone.
Then I went to R&D another one. Below are the steps I followed
1. Power off the phone
2. Press Power Key + Vol-UP key to go into recovery mode.
3. Choose the file for updating from SD card
4. While updating, it formatted the data and tried to update, which is failed.
Issues
1. Rebooting always stuck at Blue Screen
2. Cannot go to recovery mode using PowerKey + Vol-UP/Vol-Down. Blue screen appears
3. Trying connecting phone using USB, it is not recognizing.
Please Genius, help us how to fix this issue.
Please Help
Im also stuck with the same issue.. Please Help...
Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
hello everyone
this phone is NOWHERE... i cant believe how few people have this phone in the hacking community.
I've used a guide seen here
https://www.youtube.com/watch?v=BCiq21WsFEc
essentially I rooted it in KK successfully. Then I installed TWRP through the twrp app... installed successfully. no error.
Went to reboot, phone does not get past splash. Recovery instantly goes to black (powered off) screen with red LED (tells me the phone is kind of on.. but some serious hardware misunderstanding taking place.)
How can I restore the stock recovery? While it is in this no-display-red-light mode it appears on my computer in DFU... so I know it is possible to still get in there, but I cannot find anything about the stock recovery for this phone.
Can't believe ZTE has little to no support for this phone...
Possible solution
That video seemed to be for the newer model of the zte grand x, thats why its called grand x plus. I had tried it on my phone and it was like stuck in a power up loop, what i did to get out of it is to go into recovery mode by pressing and hold the power button plus the up volume button. One i got in there i just rebooted it. Try that out and see if it works. Im still looking around for a solid root for this phone
Hey guys
today i bought a wiko upulse. first thing i wanted to do is to get twrp and install supersu. i successfully unlocked the bootloader, but then i tried to flash twrp with fastboot (what seems to work). now i am in a bootloop and i really dont know what to do now. i cannot get into any mode, i tried almost every combination of keys.
and ideas?
if says:
orange mode
the device has been unlocked and cannot be trusted.
the phone will boot in 5 seconds
here is a video: youtube.com/ watch?v=2TPqvZ4sfO8
unfortunately i cannot post links to external sites because my account is too new. so the link is splitted in the middle
rafthebee said:
Hey guys
today i bought a wiko upulse. first thing i wanted to do is to get twrp and install supersu. i successfully unlocked the bootloader, but then i tried to flash twrp with fastboot (what seems to work). now i am in a bootloop and i really dont know what to do now. i cannot get into any mode, i tried almost every combination of keys.
and ideas?
if says:
orange mode
the device has been unlocked and cannot be trusted.
the phone will boot in 5 seconds
here is a video: youtube.com/ watch?v=2TPqvZ4sfO8
unfortunately i cannot post links to external sites because my account is too new. so the link is splitted in the middle
Click to expand...
Click to collapse
Same issue here. It is starting but I can't enter the recovery mode + it shuts down and reboots into the same screen after 10 to 15 seconds
Hi All
I have a ulefone power 3 which isnt modified at all , my problem is its stuck in a boot loop and not sure what to do
when i hold up and power and go into recovery it just keeps rebooting so cannot do anything, kinda new to any kind of flashing but does anyone have any ideas on what i need to do please
thanks
I think you need to flash your phone like this : http://ulefone.com/download/power3.html
same with power 3s
UPDATE: It was possible to flash the phone, but now i have some "shifted" lines on my display
UPDATE2: After performing an wireless update, everything works fine again (without twrp)
Hi, I have the same problem,
Ulefon Power 3s, after i tried to install twrp (everything worked like in the deskription at https://forum.xda-developers.com/android/development/ulefone-power-3-twrp-3-2-1-0-root-t3741853)
The phone is stuck in a bootloop (Orange State like https://img.xda-cdn.com/2fPFK8gGwJxzn2rNTC6VzDxvLI8=/https://i.imgur.com/tLOV7sz.jpg?1)
When i press the power and volume up button the screen stays black and the phone still stays inthe bootloop.
Right now I am not able to stop this bootloop.
My tools are also to big to disconnect the batery.
I am not able to connect with my computer at this time.
I asked the smae at the twrp thread.
Any suggestions?
Thanks!
Hello i have the same problem i think this version of twrp do not work with the lastet firmwares from ulefone. I think the twrp have an issue with the rom version v40...
I also stuck in the bootloop and the only thing that i could do was a new flash...