I got new Huawei Ascend G600 phone from China which is sold under China Unicom.
Since it was chinese version and I tried to installed the Custom ROM. I tried [email protected] which worked very well on the mobile. Of course, it work after unlocking the bootloader and rooted the phone.
Then I went to R&D another one. Below are the steps I followed
1. Power off the phone
2. Press Power Key + Vol-UP key to go into recovery mode.
3. Choose the file for updating from SD card
4. While updating, it formatted the data and tried to update, which is failed.
Issues
1. Rebooting always stuck at Blue Screen
2. Cannot go to recovery mode using PowerKey + Vol-UP/Vol-Down. Blue screen appears
3. Trying connecting phone using USB, it is not recognizing.
Please Genius, help us how to fix this issue.
Please Help
Im also stuck with the same issue.. Please Help...
Related
I have a problem with one of my Lenovo A830 phones.
I bought it from Etotalk, so it came rooted, and with their custom version of the Lenovo Stock ROM and their custom version of CWM 5.5 installed.
I tried formatting my SD card and then doing a factory data reset from within the operating system. (I was intending to install MIUI V5 after rebooting into recovery).
However, on rebooting, the device is now caught in an infinite boot loop, and I am not able to boot into recovery mode (by holding down power and both volume keys). It loads the initial splash screen, then shows a few seconds of the Android character and some whirring cogs before rebooting.
I am able to boot into Factory mode (power and volume up) or Meta mode (power and volume down). Factory mode has a number of options, but they are all in Chinese characters, which I am unfortunately not able to read.
I did notice that my SD card seemed to be write protected when I tried to format it in my computer and to copy on the new ROM - I solved this by putting it in a different phone and reformatting it. I wonder whether the factory reset process has write protected something it shouldn't have?
Does anyone know how I might best proceed? I've been digging around on the forums, and tried a few things, but there's nothing which seems to provide a coherent solution for this problem.
I've got the latest Android SDK Tools, MTK Droid Tools 2.4.8, SP Flash Tool 3.1312, some additional ADB drivers (120827 v3.7) that I'm not sure how to install, the latest MIUI V5 ROM (3.8.16), and the latest stock Lenovo ROM (S118 from Need A ROM, just in case I need it).
Maybe different SP Flash Tools version?
I had trouble using SP Flash Tools v3.1312 with A830. Once I switched to v3.1304.0.119 I was able to flash both the original ROM and the custom MIUI one without serious issues. I'm unable to post the download link but google it.
One other thing is that when connecting the phone, it usually loads the something something Preloader driver, which is no good (even if it gives you Download OK). When attempting to flash either ROM, try pressing both the power and volume up buttons while connecting the phone (after pressing Download), only way it worked for me.
Good luck!
I managed to sort this out quite simply in the end!
On the Lenovo A830 (and presumably other Lenovo Android phones?), you enter recovery by pressing power and then pressing volume up / down together after a short pause. The short 1 - 2 second pause is important, because if you try and press them at the same time or in quick succession it doesn't seem to work.
I then installed MIUI V5 from the SD card followed by Google Apps after a reboot. In order to get MIUI to install, I had to remove the assert check at the top of the update script, because this seems to erroneously check for the A820 (even though there isn't currently a port for this device?). It's working excellently with two exceptions - I am unable to select the SD card as a storage device, and Google Play store is not searchable (it causes a Force Close).
tominglis said:
I managed to sort this out quite simply in the end!
On the Lenovo A830 (and presumably other Lenovo Android phones?), you enter recovery by pressing power and then pressing volume up / down together after a short pause. The short 1 - 2 second pause is important, because if you try and press them at the same time or in quick succession it doesn't seem to work.
I then installed MIUI V5 from the SD card followed by Google Apps after a reboot. In order to get MIUI to install, I had to remove the assert check at the top of the update script, because this seems to erroneously check for the A820 (even though there isn't currently a port for this device?). It's working excellently with two exceptions - I am unable to select the SD card as a storage device, and Google Play store is not searchable (it causes a Force Close).
Click to expand...
Click to collapse
Hello,
How did you manage to fix the reboot loop?I have the same problem,after a factory reset the phone just reboot like you said in first post...please help me fix it...
claudiuionel said:
Hello,
How did you manage to fix the reboot loop?I have the same problem,after a factory reset the phone just reboot like you said in first post...please help me fix it...
Click to expand...
Click to collapse
Hi I had similar "reboot loop" problem this morning after a phone factory reset.
I have no idea how I solved that but the following was the steps I tried:
1. Install the MTK6589_PdaNET_ADB_VCOM_Drivers. Skip the USB connection during setup. Start the PdaNET after setup finished.
2. Insert battery inside the phone and connect the phone with the computer by USB
In my case, the phone reboot loop once, and the lenovo screen appeared in the second restart. The phone hanged. I unplugged the cable, took out the battery, insert the battery again and start the phone normally again and it is working now.
I recommend installing the recovery rom after you have fixed the phone.
Goodluck
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
My understanding is that being on that screen @ the logo IS fastboot mode. See if the PC Suite can get you back up and running: http://www.downloads.techdiscussion.in/smartphones/huawei-ascend-y511-pc-suite-and-usb-driver/
The reason a factory reset doesn't help in this situation is that you made a change to /system which isn't much affected when you wipe factory data which is /data partition.
Huawei Y511-U30 stuck at boot logo
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i charge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Ahmed Hesham said:
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Click to expand...
Click to collapse
You mean by STOCK ROM backup or just phone data?
---------- Post added at 10:58 PM ---------- Previous post was at 10:54 PM ----------
trm33 said:
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i cahrge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
Click to expand...
Click to collapse
Do you mind explainig about firmware and rom?? I don't get it. Firmware=android version updare or full stock rom? Like I'm using 4.2.2!!.. I don't know much and sorry about my english.
Would like to try the application please send it, you can mail me on [email protected]
Guys it happened to me tooo...and i fixed it...all u have to do is download sp flashtool(google for it)...and google for a stock rom for huawei y511...(sorry i can't upload the files because i'm on a data block)...download sp flashtool and install it and open it...choose the scatter file inside the rom and some files will load to the app select only the recovery file and click the download button...connect your phone to the pc pressing the vol down button..it will flash the recovery to your phone...then boot into cwm recovery of your phone and flash a custom rom...(obviously u have to download one...after that u can change back to stock if you like)...
help plzzz
Help plzzz!
My Huawei Y511 U10 is not booting Can You Help Me To Fix It And if You Have a Rom OF Your Huawei Y511 U10 Plsss Upload It And Give Me The Link
Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
Hi everybody, my g510-01 (rooted, unlocked bootloader, cm11 os, cwm recovery) wasn't able to enter in recovery mode so i tried to follow this guide (http://forum.xda-developers.com/showthread.php?t=909243) to fix the problem, but now when i switch it on it remains stuck on the huawei logo and i can't enter in recovery mode neither. Maybe someone can solve my problem? thanks
P.S. if you need any further information, please ask me.
nobody knows how to solve my problem?
hello???
Well, you tried to fix it with a guide from 4 years ago for another phone, so that would probably explain it not working now. This should be what you need here:
http://consumer.huawei.com/en/support/products/downloads/detail/g510-en.htm?id=21425
Finally i manage to solve my problem. It was easier than i expected. Just put folder "SDLOAD" form the zip of original firmware, that can be found on huawei website, or the link above, on a formatted sd card. Now turn off your g510, insert the sd card and press: Vol- Vol+ and power button. Your phone will start automatically to reset your phone.
Hello everyone!
I bought a Meizu Pro 7 recently and unfortunately I happen to have bricked it.
When I received the phone, it was using the 6.3.0.0A firmware (so it was Chinese) and I wanted to change it to 6.3.0.0G.
I followed a tutorial on chinahandys.net in order to do it, and it worked! (I cannot post the link since I am a new user on xda but it is called "Install Global ROM on chinese Meizu Pro 7")
But now I turned it off, and now when I try to turn it on, the Flyme logo shows up and it keeps loading for forever.
I tried accessing recovery mode by pressing volume down + power and this is what I get (this is the same screen that shows up when you boot the phone normally, but at the bottom of the screen it is written "=> Fastboot mode(sec,lock,rooted)"):
up.kuraip.net/0515P8dy3984.jpg
Do you have any idea how I could fix this issue, I just bought the phone and I don't really know what to do to fix it :'(
Kuraip said:
Hello everyone!
I bought a Meizu Pro 7 recently and unfortunately I happen to have bricked it.
When I received the phone, it was using the 6.3.0.0A firmware (so it was Chinese) and I wanted to change it to 6.3.0.0G.
I followed a tutorial on chinahandys.net in order to do it, and it worked! (I cannot post the link since I am a new user on xda but it is called "Install Global ROM on chinese Meizu Pro 7")
But now I turned it off, and now when I try to turn it on, the Flyme logo shows up and it keeps loading for forever.
I tried accessing recovery mode by pressing volume down + power and this is what I get (this is the same screen that shows up when you boot the phone normally, but at the bottom of the screen it is written "=> Fastboot mode(sec,lock,rooted)"):
up.kuraip.net/0515P8dy3984.jpg
Do you have any idea how I could fix this issue, I just bought the phone and I don't really know what to do to fix it :'(
Click to expand...
Click to collapse
Did you join the Flyme Forum? there is a lot of information there on problems flashing the Pro7. There are different model numbers. My Pro7 has the H version with the latest G version rom. I think that there is an A version Pro7 which is for the Chinese market and there is a specific G rom for that phone.
Kuraip said:
Hello everyone!
I bought a Meizu Pro 7 recently and unfortunately I happen to have bricked it.
When I received the phone, it was using the 6.3.0.0A firmware (so it was Chinese) and I wanted to change it to 6.3.0.0G.
I followed a tutorial on chinahandys.net in order to do it, and it worked! (I cannot post the link since I am a new user on xda but it is called "Install Global ROM on chinese Meizu Pro 7")
But now I turned it off, and now when I try to turn it on, the Flyme logo shows up and it keeps loading for forever.
I tried accessing recovery mode by pressing volume down + power and this is what I get (this is the same screen that shows up when you boot the phone normally, but at the bottom of the screen it is written "=> Fastboot mode(sec,lock,rooted)"):
up.kuraip.net/0515P8dy3984.jpg
Do you have any idea how I could fix this issue, I just bought the phone and I don't really know what to do to fix it :'(
Click to expand...
Click to collapse
Hold Volume Up + Power to get into recovery mode, Volume Down + Power = Fastboot Mode