[MOD]Restore "lock the Bootloader" message after installing nfounds Bootstack O_B12 - ZTE Axon 7 Themes, Apps, and Mods

[MOD]Restore "lock the Bootloader" message after installing nfounds Bootstack O_B12
I missed my start options after installing nfounds Bootstack. So I hacked this little file to get them back.
Just flash in TWRP and your boot options are back.
After leaving nfounds TWRP you'll see a short distortion of the screen. This seems to be the normal behaviour for this constellation of code
Sorry #nfound I love your work. But in this special case I'm not with you that we don't have a choice to have this bootmessage or not.

Is this for the g only? Or will it work in the U version too? Thanks

J0nhy said:
Is this for the g only? Or will it work in the U version too? Thanks
Click to expand...
Click to collapse
This should‘nt be necessary for the U version.

Hey man, thanks for this.
I'm on B01 G Oreo ROM, can I use this or would this cause trouble?

nfsmw_gr said:
Hey man, thanks for this.
I'm on B01 G Oreo ROM, can I use this or would this cause trouble?
Click to expand...
Click to collapse
I don't see any trouble in your case. Try it.

Works. Thx for this.

Related

Android Marhsmallow (Cyanogenmod13) we had got UNOFFICIAL port.(d802)

here is a link !
https://www.androidfilehost.com/?fid=24269982086992417
who tested this rom , please leave a review
dowloading...
Edit: Boots correctly, but when the Welcome screen appears it reboot... How do I log that?
Just be careful when it comes to bootloaders etc
Not working on 802 stuck. Restart automatically when arrive to the first configuration screen.
Uechy said:
dowloading...
Edit: Boots correctly, but when the Welcome screen appears it reboot... How do I log that?
Click to expand...
Click to collapse
How did you install it? I did a clean install with lollipop base but it's stuck on CM logo for 5 minutes...
For the welcome screen, what gapps did you try? I read that on G4 and G3 OpenGApps had problems...
ferap said:
Not working on 802 stuck. Restart automatically when arrive to the first configuration screen.
Click to expand...
Click to collapse
i've same problem. :c
Callintz96 said:
How did you install it? I did a clean install with lollipop base but it's stuck on CM logo for 5 minutes...
For the welcome screen, what gapps did you try? I read that on G4 and G3 OpenGApps had problems...
Click to expand...
Click to collapse
I first try with DeltaDroidGapps. I see the stuck on the config scrren and i reinstall (always with all wipes) without any gapps. I search on dev/log to see if there is any log but nothing...
I have the lollipop Hybrid bootstacks and I was on exodus ROM
So it's better to wait a stable Build
Good to see the progress though, even if the majority of it doesn't work
---------- Post added at 02:52 PM ---------- Previous post was at 02:46 PM ----------
Uechy said:
I first try with DeltaDroidGapps. I see the stuck on the config scrren and i reinstall (always with all wipes) without any gapps. I search on dev/log to see if there is any log but nothing...
I have the lollipop Hybrid bootstacks and I was on exodus ROM
Click to expand...
Click to collapse
I don't think it has to do with the bootloader then, cause then it would keep boot looping and never reach the configuration screen
Will work on HTC One M9 pw?
JuanKca said:
Will work on HTC One M9 pw?
Click to expand...
Click to collapse
Are you lost?
Finally good news! @JuanKca do not try this one on your M9!
Someone posted a fixed gapps package for 6.0 on the AICP Google+ page choose arm nano or pico depending on what apps you want.
It's not working - I got a reboot after welcome screen. With and without GApps. So it's probably bad build or it's not ready yet.
This is only for D802? I have a D801 (T-Mobile).
I'm gonna flash this on my vs980 wonder how well that'll go
zmankiller said:
I'm gonna flash this on my vs980 wonder how well that'll go
Click to expand...
Click to collapse
Please don't.
any one knows what bootstacks or bootloader should we flash before flashing this rom?
errikosd said:
Please don't.
Click to expand...
Click to collapse
Ha I didn't work but I edited the updater script and then I had the same problems the other people were having

No AOSP builds/ROMs on 7.0?

Hey guys, I have no idea what I'm doing, so I'm wondering if anyone else has compiled a flashable Aosp or near-aosp build of android 7.0? I'm currently on PureNexus, and I'm looking for a very minimal ROM as it's the only way to reduce the lag on this low memory device we all know and love (hate?). Thanks!
Sent from my ONEPLUS A3003 using Tapatalk
jaju123 said:
Hey guys, I have no idea what I'm doing, so I'm wondering if anyone else has compiled a flashable Aosp or near-aosp build of android 7.0? I'm currently on PureNexus, and I'm looking for a very minimal ROM as it's the only way to reduce the lag on this low memory device we all know and love (hate?). Thanks!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I'm 100% with you on this. Minimum is best. I was wondering where the homecooked 7.0s are too.
Way too soon for a stable aosp build.
You'll probably see a flashable, pre-rooted stock rom appear first. Often these are tweaked, debloated etc so can be quite minimal.
Experimental aosp builds will likely emerge soon too but if you're the type to moan about roms not appearing fast enough and the low memory of a device you bought then you likely won't like bugs either. Maybe wait for a bit.
I wanna post mine - but GApps FC (some location provider error) and I am looking for a fix. This commit didn't fix it and I thought it might!
https://github.com/bshiznit/platform_frameworks_base/commit/4f18c68e03b996dab5df4d586db9c9af5647445a
Anyway - if there is interest (and it looks like there is) I might post as WIP this evening...
bshiznit said:
I wanna post mine - but GApps FC (some location provider error) and I am looking for a fix. This commit didn't fix it and I thought it might!
https://github.com/bshiznit/platform_frameworks_base/commit/4f18c68e03b996dab5df4d586db9c9af5647445a
Anyway - if there is interest (and it looks like there is) I might post as WIP this evening...
Click to expand...
Click to collapse
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
USBhost said:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
Click to expand...
Click to collapse
Thanks! It's unclear from that if there is something I can cherry-pick, or what Any thoughs from a fellow dev?
@jaju123, @Jeff_in_LA, @astralbee, @USBhost threw my WIP build up under Android Development:
http://forum.xda-developers.com/nexus-9/development/rom-t3451480/
bshiznit said:
@jaju123, @Jeff_in_LA, @astralbee, @USBhost threw my WIP build up under Android Development:
http://forum.xda-developers.com/nexus-9/development/rom-t3451480/
Click to expand...
Click to collapse
Cool, thanks!
Jeff_in_LA said:
Cool, thanks!
Click to expand...
Click to collapse
You bet - just remember it is a work in progress
No worries. I appreciate all the hard work you did on this.
USBhost said:
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-7.0 this may help
Click to expand...
Click to collapse
I got a bare bones up and working w/ Opengapps but I can't get root to work. Tried latest SuperSu but no go. It tries to install as systemless and then fails not sure why Never did that on my MM builds
 @USBhost You see anything in my git repos??? Basically the same as my MM builds.
Attaching some twrp screenshots and recovery.log below.
If anyone can help it would be appreciated.
Thanks
fhem said:
I got a bare bones up and working w/ Opengapps but I can't get root to work. Tried latest SuperSu but no go. It tries to install as systemless and then fails not sure why Never did that on my MM builds
@USBhost You see anything in my git repos??? Basically the same as my MM builds.
Attaching some twrp screenshots and recovery.log below.
If anyone can help it would be appreciated.
Thanks
Click to expand...
Click to collapse
dont try v2.78 SR1
try only the v2.78
PS its not your fault
other ROMs have the same problem (the ones i tried)
USBhost said:
dont try v2.78 SR1
try only the v2.78
PS its not your fault
other ROMs have the same problem (the ones i tried)
Click to expand...
Click to collapse
Thanks but get same result --> I have attached another twrp recovery.log at bottom. It shows whats happening w/ su flash. I think LOL.
I had stock rooted but now am trying to get my aosp build up and running w/ no luck rooting. I am going to start over clean w/ fastboot stock w/o root and then try installing aosp rom and rooting.
I am also having the problem w/ twrp unhooking sometimes --- d**n N9 is very finicky!!!
Thanks for the help.
http://hastebin.com/usowulowal.diff
fhem said:
Thanks but get same result --> I have attached another twrp recovery.log at bottom. It shows whats happening w/ su flash. I think LOL.
I had stock rooted but now am trying to get my aosp build up and running w/ no luck rooting. I am going to start over clean w/ fastboot stock w/o root and then try installing aosp rom and rooting.
I am also having the problem w/ twrp unhooking sometimes --- d**n N9 is very finicky!!!
Thanks for the help.
Click to expand...
Click to collapse
You can also just try flashing the stock boot.img
And then flash SuperSU
USBhost said:
You can also just try flashing the stock boot.img
And then flash SuperSU
Click to expand...
Click to collapse
Ok finally got some time to play ---- fastboot is my friend LOL!!!
I used fastboot to wipe and start over w/ a clean tab -----> Only way I get root with my rom at current build is using twrp ---> flash my rom w/ stock boot image, flash supersu sr1 2.78 ---> bootup got root. That's all I can find that works. @USBhost Do you have an N k that allows root??? Do you have any idea what is going on with this??? BTW --- Trying to install as system install causes bootloop for me. So the only option I have at the moment is supply stock boot image and systemless root and w/ the rom. PITA

Galaxy Alpha Kor Model Nougut Booted(Cm14.1)

Thanks to modpunk, Serenitys, and other developers, i builded cm14.1 for kor alpha and it works fine.
Great! Can you share it?
wow, it's stable for daily use?
I was looking for your thread since yesterday. any bugs? excited to try this out
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
josepmaria said:
Great! Can you share it?
Click to expand...
Click to collapse
you can find it on his androidfilehost profile, not sure if i'm allowed to share the link.
Did you face any bugs and does it support fingerprint unlock?
How did you do it?
Edit:
I'm going to try the latest build from androfilehost.
I hope the mic (in calling) is working and other basic functions. I have a G850k by the way.
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
click.here said:
Its a soft brick. Your model is not a korean variant he says that it is working for korean variants. For G850S/K/L only. Try to go to TWRP and flash another rom. Or use odin.
Click to expand...
Click to collapse
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
kevkev0320 said:
okay thank you very much,
Downloaded and flashed CM.13, my phone is up and running again,
Sorry for the off-topic related post
Click to expand...
Click to collapse
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
click.here said:
I dont know which CM13 you are refering to but you can extract that from the official ROM if I'm not mistaken
Click to expand...
Click to collapse
It was an unofficial build, but my system is now running,
many thanks <3
I can confirm that CM14.1 works with my Korean variant G850k but the mic problem still persist from previous CM13 . I hope this could be fix and more power. You should create a new thread when everything seems to be functional so that we could also inform others and have they're feedbacks
kevkev0320 said:
Hello,
I Flashed this using TWRP 2.8.1.1
And flashed the Gapps for 7.1
But after restart system my phone shows samsung logo
And after that blank screen, then after some min my system started but i dont have anything on my screen while my back and recent buttons are flashing and i feel my phone fibrate please what to do did i bricked my phone?
Came from official 4.4.4 Rom
SM-G850F
Click to expand...
Click to collapse
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
do u understand dutch? can i send u a PM?
kevkev0320 said:
do u understand dutch? can i send u a PM?
Click to expand...
Click to collapse
yes I do, go ahead.
ArisRafaelli said:
you need to use TWRP 3.0.2, I had the same issue as you on 2.8. eventually got it booting. (im on SM-G850F)
but I had a "validity service has stopped" popup screen that just kept popping up. I reflashed, still same issue. I'm not the only one with this issue. I'm guessing it's because of the fingeprint sensor support that has been added. don't quote me on this tho
Click to expand...
Click to collapse
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
click.here said:
The alternative work around for that is to keep closing the popup screen til its gone or freeze it. Does the mic (in calling) or the voice recorder works for you?
Click to expand...
Click to collapse
i tried, it won't go away. wasn't able to test anything tbh.
ArisRafaelli said:
i tried, it won't go away. wasn't able to test anything tbh.
Click to expand...
Click to collapse
You have to close it quickly and press next until you reach the home screen. After that just enable developer settings and it will go away.
@hdh980910 we wait for your answers.
Thanks i will go to flash cm14.1 on my alpha
Thanks i will go to flash cm14.1 on my alpha
many people in develoid cafe say kt alpha has connect out phenomenon. can you fix it?

Invert MENU and Back buttons (Flashable zip) LineageOS 14.1

Based on this post i've made this file to invert the MENU and BACK button on LineageOS 14.1
Instructions:
1- Flash the zip in recovery
2- Reboot
Before: ("BACK------HOME-----MENU")
After: ("MENU------HOME-----BACK")
It works fine! thanks! A2017U
I tried doing the editing myself on the generic.kl file nut I see that you did it in the synaptics.kl, i guess that's were I went wrong. Cheers!:highfive:
Just what I needed. Thank you very much...
XblackdemonX said:
Based on this post i've made this file to invert the MENU and BACK button on LineageOS 14.1
Instructions:
1- Flash the zip in recovery
2- Reboot
Before: ("BACK------HOME-----MENU")
After: ("MENU------HOME-----BACK")
Click to expand...
Click to collapse
Works like a charm. Thank you kindly OP!
Sent from my ZTE A2017U using Tapatalk
Awesome thank you.
Seems to work on my A2017G as well.
You can do this built into Los so this seems a bit pointless
Android4thewin said:
You can do this built into Los so this seems a bit pointless
Click to expand...
Click to collapse
Excellent contribution to the thread! #Kidding. Seriously? What you should have done was kept this to yourself or move on. While this may not apply to you, and you can maunally fix it yourself.. that defeats the purpose of XDA and general android hacking. Trying to alter things that isn't otherwise stock and make it as easy as possible.
Thanks for the work OP. I was looking into figuring this out today but you beat me to it.
nolimit78 said:
Excellent contribution to the thread! #Kidding. Seriously? What you should have done was kept this to yourself or move on. While this may not apply to you, and you can maunally fix it yourself.. that defeats the purpose of XDA and general android hacking. Trying to alter things that isn't otherwise stock and make it as easy as possible.
Thanks for the work OP. I was looking into figuring this out today but you beat me to it.
Click to expand...
Click to collapse
Yeah but it is already an option in Los so you dont even need to flash this just go to settings and under buttons change what they do. I don't mean to seem mean I'm just pointing out a blatant fact and that this is inefficient to reach your goal.
Android4thewin said:
Yeah but it is already an option in Los so you dont even need to flash this just go to settings and under buttons change what they do. I don't mean to seem mean I'm just pointing out a blatant fact and that this is inefficient to reach your goal.
Click to expand...
Click to collapse
No it is not. It is option to change onscreen buttons, not hardware. This is great find. Thanks again
kodrnusa said:
No it is not. It is option to change onscreen buttons, not hardware. This is great find. Thanks again
Click to expand...
Click to collapse
You can do hardware and software
Edit typo mend to say can't
Android4thewin said:
You can do hardware and software
Click to expand...
Click to collapse
Please post a screenshot because i cannot see it
XblackdemonX said:
Please post a screenshot because i cannot see it
Click to expand...
Click to collapse
Oh sorry I meant to type you can't do software and hardware.... Lol AC hates me
is it working on RR?
I installed the A2017LineageOS_N_Bootstack.zip on my axon7 G and now it stays at the ZTE boot logo. Is there any chance to install the A2017U_Nougat_Bootloader+ModemFix2.zip now ?
Hugh, wrong forum, I have to many taps open https://forum-lw-1.xda-cdn.com/images/smilies/biggrin.gif
WesTD said:
is it working on RR?
Click to expand...
Click to collapse
RR has is built in if you want I can give you screenshots as to where. Go to setting then buttons
Android4thewin said:
RR has is built in if you want I can give you screenshots as to where. Go to setting then buttons
Click to expand...
Click to collapse
No need anymore bro, it's working.
Hi, running 5.8.3 RR in Axon 7 rhere is no options like in stock was. And flashing the patch has zip-errors...
Working for lineage. Thank you!
bommelkopp said:
Hi, running 5.8.3 RR in Axon 7 rhere is no options like in stock was. And flashing the patch has zip-errors...
Click to expand...
Click to collapse
RR has SmartBar does it not? No need for the flashable zip then.
Go through and become familiar with the ROM's settings.
LG G3 D851, Tesla v4.4 ROM, MultiROM, Tapatalk 4.9.5
twrp-3.1.1-0-ailsa_ii.img and 14.1 lineage-14.1-20171106-nightly-axon7-signed.zip = works perfect but first boot after flashing about 10 min
Thank you so much!

Please Delete

Please Delete.
U99Dev said:
FAQS
Q: When are you updating this rom?
A: When samsung releases the next MAJOR/MONTHLY security patch update.
Click to expand...
Click to collapse
but why DEV? G92xIDVS3FQL5 base is released with december patch. So by your FAQ I assume an update is coming shortly after you just released this
Thanks in advance to iqbal sareem.
I was waiting for this kind of rom for my wife S6! Thank You!!!
noxxxious said:
but why dev? G92xidvs3fql5 base is released with december patch. So by your faq i assume an update is coming shortly after you just released this
thanks in advance to iqbal sareem.
Click to expand...
Click to collapse
i can't find it on sammobile, if you link me to it. I can drop an update asap
Thanks for the effort of baking this rom! Having a stock, rooted and debloated rom is always nice to have. You think u could drop the latest bootloader and modem too?
U99Dev said:
i can't find it on sammobile, if you link me to it. I can drop an update asap
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920I/INU/download/G920IDVS3FQL5/199606/
Samfirm downloader is way superior than any of those websites.
U99Dev said:
SAMSTOCK FOR THE S6
Q: Does this work with my device?
A: If its a G920F/W8/I OR 925F/W8/I. Yes. Yes it does. If not. Get out.
Hello DEV. Although it is stated that 925F is supported, in the website samstock is only available for flat. Would that file support for edge too. Thanks in advance.
Click to expand...
Click to collapse
noxxxious said:
https://www.sammobile.com/firmwares/galaxy-s6/sm-g920i/inu/download/g920idvs3fql5/199606/
samfirm downloader is way superior than any of those websites.
Click to expand...
Click to collapse
in progress
@U99Dev I'm on your latest Ressurection Remix ROM, but WhatsApp bugs are too annoying. Do I need something else besides wiping everything and flashing the zip for this ROM? Thanks
Also: Title says December Patch, Text says August Patch and on your site it says November Patch... which is it?
Alright, so this looks nice. Testing it out. Can't tell for sure if shutter sound button is included in the camera app, but I guess we'll find out.
Hello, I do not know if I understand correctly, I need to install the latest rom and only then install TWRP and install this rom ?? Do you understand me?
Great rom! I think the best actually for s6 g920f.
No bugs
Works like a charm. Very smooth and fast.
great job!
Br
---------- Post added at 05:58 AM ---------- Previous post was at 05:54 AM ----------
manix1960 said:
Hello, I do not know if I understand correctly, I need to install the latest rom and only then install TWRP and install this rom ?? Do you understand me?
Click to expand...
Click to collapse
1.Check for update if you can update so do it.
2. Install twrp
3. Fash this rom.
4. Enjoy your new fast System
Hearing myself when calling someone, any fix for this?
I have 2 questions, is the arona installer the mod date is incorrect. Also there are no carriers for the netherlands...
Aggro82 said:
Great rom! I think the best actually for s6 g920f.
No bugs
Works like a charm. Very smooth and fast.
great job!
Click to expand...
Click to collapse
lol, no ****. it's stock. duhh.
Nonononoki said:
Hearing myself when calling someone, any fix for this?
Click to expand...
Click to collapse
if u was selling drugs then u got some serious problems
ApexArizona said:
if u was selling drugs then u got some serious problems
Click to expand...
Click to collapse
Best comment I've seen in a long while ?
Problem with WiFi
Hello guys after installing this rom i noticed that my Samsung Galaxy S6 920F forgets WiFi passwords. When i turn off WiFi and then turn it back on, process is longer than usual and all WiFi networks which were previously remembered are now unknown, and device keeps asking me for a password. Anyone had same issue?
Edit: I am noticing now after installing this rom my model number is no longer SM-G920F, it is SM-G920I, how is this possible?
maretomic said:
Hello guys after installing this rom i noticed that my Samsung Galaxy S6 920F forgets WiFi passwords. When i turn off WiFi and then turn it back on, process is longer than usual and all WiFi networks which were previously remembered are now unknown, and device keeps asking me for a password. Anyone had same issue?
Click to expand...
Click to collapse
Could try note fan edition ROM. Has some of these things fixed.
meboy said:
Could try note fan edition ROM. Has some of these things fixed.
Click to expand...
Click to collapse
I would be more than thankful if you could pass me link to that ROM.

Categories

Resources