[PIE][Kernel][28.11.2020][4.9.246] Kirisakura_NEXT 1.2.0 for HTC U12+ aka Imagine - HTC U12+ ROMs, Kernels, Recoveries, & Other Develo

Kirisakura-Kernel for HTC U12+
Hello everyone,
Kirisakura kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
This includes upstreaming to latest linux stable for enhanced security and stability. As well as bringing in important new CAF patches, as soon as CAF releases the sources for the SD 845!
Revisiting the stock EAS implementation for further efficiency enhancements is also on my current roadmap for future development. I´m sure there is potential!
To have a read about our scheduler, which is called EAS, take a look here:
https://developer.arm.com/open-source/energy-aware-scheduling
Main Features:
- Based on latest kernel sources from HTC for the HTC U12+ (2.45)
- Upstreamed to latest 4.9.246
- CAF-Upstream merged
- Pixel 3/XL EAS ported over
- Cleanslate features from @tbalden included! (big thanks to him!)
CPU related features:
- Dynamic schedtune boost from @joshous
- CPU Input boost from @Sultanxda
- Disclaimer: please take a look at post 2 on how to set them up!
- Power saving workingqueues enabled by default (toogleable in EXKM)
have a read here: https://lwn.net/Articles/731052/
this complements EAS in general
- DDR bandwidth boost from @Sultanxda
Graphic related features:
- KCAL to control the display
- Adreno Boost
- Enabled NAP power saving state of Adreno 630
Network related features:
- Wireguard Support
Misc Features:
IO-Schedulers:
- cfq
- bfq
- maple
- deadline
- noop
- tripndroid
- fiops
- zen
TCP Congestion Algorithms:
- advanced algorithms enabled
- includes new bbr and sociopath tcps
Wakelock Blocker:
- advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- common wakelocks that are safe to be blocked are blocked by default
Feature section for the "non visible" but perceptible improvements:
- mark certain IRQ and kthreads as performance critical
- updated schedutil governor
- updated binder section (responsible for interprocess communication)
- updated sdcardfs (have a read about it here: https://www.xda-developers.com/divi...les-fuse-replacement-will-reduce-io-overhead/ )
- Speculative Page Faults (1. 2)
- Memory allocation overflow protection (kernel hardening feature)
- proc gate vulnerability fixed
Requirements
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment
How to flash the Kernel:
1. Download the kernel.zip to your device
2. Reboot to TWRP
3. Flash the kernel.zip in TWRP
4. The kernel zip will detect if you´re rooted and keep root in that case!
5. Reboot and Profit
IMPORTANT NOTICES
1. After rooting, the option to enable face unlock from htc may be greyed out.
How to fix:
a. Open Magisk Manager
b. Open the side menu and tap on magisk hide
c. Tick faceunlock to be hidden
DOWNLOAD:
Download is located always in this folder:
https://www.androidfilehost.com/?w=files&flid=278195
Important: Read after Download
Please take a look at the second post after flashing the kernel!
Changelog:
0.1 Initial Release
0.2 https://forum.xda-developers.com/showpost.php?p=77002100&postcount=32
0.5 https://forum.xda-developers.com/showpost.php?p=77092842&postcount=46
1.0 https://forum.xda-developers.com/showpost.php?p=77131607&postcount=61
1.1 https://forum.xda-developers.com/showpost.php?p=77187557&postcount=82
1.3 https://forum.xda-developers.com/showpost.php?p=77228675&postcount=85
1.4 https://forum.xda-developers.com/showpost.php?p=77234128&postcount=88
1.7 https://forum.xda-developers.com/showpost.php?p=77255692&postcount=90
2.0.3 https://forum.xda-developers.com/showpost.php?p=77515446&postcount=115
2.1.1 https://forum.xda-developers.com/showpost.php?p=77585106&postcount=136
2.2.0 https://forum.xda-developers.com/showpost.php?p=77663581&postcount=167
2.2.3 https://forum.xda-developers.com/showpost.php?p=77757758&postcount=181
2.3.4 https://forum.xda-developers.com/showpost.php?p=77856442&postcount=195
3.0.2 https://forum.xda-developers.com/showpost.php?p=78204561&postcount=244
4.1.1 https://forum.xda-developers.com/showpost.php?p=78315932&postcount=261
5.0.0 https://forum.xda-developers.com/showpost.php?p=78767277&postcount=301
5.2.1 https://forum.xda-developers.com/showpost.php?p=78856374&postcount=321
7.0.0 https://forum.xda-developers.com/showpost.php?p=79353529&postcount=337
9.1.0 https://forum.xda-developers.com/showpost.php?p=79696218&postcount=355
10.0.0/1 https://forum.xda-developers.com/showpost.php?p=79973617&postcount=364
Pie and forward (please not this release is a hacked base OREO-base to work on Android Pie):
10.7.0 https://forum.xda-developers.com/showpost.php?p=81035393&postcount=378
Pie:
1.2.0_NEXT https://forum.xda-developers.com/showpost.php?p=84014357&postcount=388
Donations:
Donations are not mandatory but very welcome if you want to support development or just buy me a coffee
If you like my work: http://paypal.me/freak07
Credits:
@osm0sis for all his work, including the ak2 installer!
@tbalden for being the best HTC wingman!
@LeeDroid for his awesome roms!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me
XDA:DevDB Information
Kirisakura-Kernel , Kernel for the HTC U12+
Contributors
Freak07
Source Code: https://github.com/freak07/Kirisakura_Imagine/commits/master_bluecross_eas
Kernel Special Features: Linux Upstream, KCAL, CAF, Cleanslate Features, Pixel 3 EAS
Version Information
Status: Stable
Created 2018-06-28
Last Updated 2020-11-28

How to set up the kernel
as with release 4.1.1 it’s advised to change no boost settings at all! It’s all flash and forget
This is a short guide on how to set up the kernel. This is currently required because TWRP is not yet ready and therefore I have no ak2 zip to set that all up.
The following is deprecated as with 0.5 Release!
Basically I decided to disable pnpmgr. This is htc’s daemon for controlling the CPU boosts.
I integrated a few other boosts to the kernel that work way better to replace HTC´s mechanism.
The phone is more smooth and more efficient now.
This is not a requirement at all. It´s entirely optional in case you aren´t satisfied with the current state of things!
1. With a root explorer go to /system/vendor/etc and rename pnp.xml to pnp.xml.bak
That will disable pnpmgr on the next reboot.
2. In EXKM navigate to CPU -> Boost Settings
3. Set the values like on the attached screenshot! and toogle the arrows to set it on reboot
4. cpu input boost currently has no interface in EXKM. The predefined values are fine. But if you navigate to Tools -> User Settings, you can call any file and change the values exactly to your liking.
Just hit the + and add the following paths:
sys/module/cpu_input_boost/parameters/input_boost_freq_lp boost freq of the little cluster
sys/module/cpu_input_boost/parameters/input_boost_freq_hp boost freq of the big cluster
sys/module/cpu_input_boost/parameters/input_boost_duration boost freq duration
5. Reboot and profit
The following is advised as with the Release of 0.5!
1. If you previously renamed pnp.xml found in /system/vendor/etc, to pnp.xml.bak, rename it back to pnp.xml!
Now reboot!
2. Here is a screenshot of the optional boost settings I´m currently running. These are a bit more aggressive than stock, provide more smoothness but cost a tiny bit of battery. In the end I still achieve way better battery results on 0.5 than on 0.2 even with additional boosts enabled. That is due to the energy saving commits I mentioned in the changelog of 0.5.
Here is the screenshot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

also mine

and mine

woo-hooo!

Thank's so much for you work mate....wich app could use to get advanced color control ??...is there able to get more bright on the screen ? because this is dim as u11+, i can't see any difference in brightness...very frustrating

neofrost37 said:
Thank's so much for you work mate....wich app could use to get advanced color control ??...is there able to get more bright on the screen ? because this is dim as u11+, i can't see any difference in brightness...very frustrating
Click to expand...
Click to collapse
You can control kcal with exkm app.
But you can just control srg, saturation, contrast etc.
With Kcal nothing can be done about the brightness. Sorry for that!

I forgot to add Wireguard as a supported feature. I corrected this in the OP.

neofrost37 said:
Thank's so much for you work mate....wich app could use to get advanced color control ??...is there able to get more bright on the screen ? because this is dim as u11+, i can't see any difference in brightness...very frustrating
Click to expand...
Click to collapse
There is absolutely nothing wrong with the brightest on this phone. Slightly dimmer than U11. Currently have auto brightness off and set just under half way. In the sun it visible at 3/4 brightness.

schmeggy929 said:
There is absolutely nothing wrong with the brightest on this phone. Slightly dimmer than U11. Currently have auto brightness off and set just under half way. In the sun it visible at 3/4 brightness.
Click to expand...
Click to collapse
so would you post a picture to compare both phone's with max bright ??....mine is just a little bit more bright than u11+ , maybe i just have bad luck with my 2 last htc's

neofrost37 said:
so would you post a picture to compare both phone's with max bright ??....mine is just a little bit more bright than u11+ , maybe i just have bad luck with my 2 last htc's
Click to expand...
Click to collapse
Just did a side by side pic and to me the U12+ seems brighter probably due ether cooler color.

schmeggy929 said:
Just did a side by side pic and to me the U12+ seems brighter probably due ether cooler color.
Click to expand...
Click to collapse
Thank's mate, but left side phone's not seems htc, because u12+ dont have rounded corners i the screen !

neofrost37 said:
Thank's mate, but left side phone's not seems htc, because u12+ dont have rounded corners i the screen !
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.leedroid.shortcutter&hl=en there's an easy overlay setting by @LeeDroid

tbalden said:
https://play.google.com/store/apps/details?id=com.leedroid.shortcutter&hl=en there's an easy overlay setting by @LeeDroid
Click to expand...
Click to collapse
wow, didn't know it !, you make my day , great app....sad with my display bright, awesome device i ever had....just hope update with a 20% more bright ..thank's everyone for answer

neofrost37 said:
wow, didn't know it !, you make my day , great app....sad with my display bright, awesome device i ever had....just hope update with a 20% more bright ..thank's everyone for answer
Click to expand...
Click to collapse
Did you turn off auto brightness and tried full manual brightness? For me it is absolutely fine, even with auto
Sent from my HTC U12+ using XDA Labs

DeeZZ_NuuZZ said:
Did you turn off auto brightness and tried full manual brightness? For me it is absolutely fine, even with auto
Sent from my HTC U12+ using XDA Labs
Click to expand...
Click to collapse
I'll try mate, thank's

neofrost37 said:
Thank's mate, but left side phone's not seems htc, because u12+ dont have rounded corners i the screen !
Click to expand...
Click to collapse
Leedroid's shortcutter App (Rounded Corners)

Whoot-whoot. Great job mate.
Sent from my HTC U12+ using XDA Labs

neofrost37 said:
I'll try mate, thank's
Click to expand...
Click to collapse
Nothing mate, it's really dim even a cloudy day

neofrost37 said:
Nothing mate, it's really dim even a cloudy day
Click to expand...
Click to collapse
No problems here. Yesterday I was looking at the phone in the sun and had no problems
Sent from my HTC U12+ using XDA Labs

Related

[KERNEL] AJK v4.9 [** The ONE **] [JB]

Imitated, but NEVER duplicated!
Rock solid stability and great performance for your SGH-I777.
Features:
Full support for Kernel Screen Gestures Builder
WIFI Driver ported from SG4
New Mali V2 Video Driver
Overclocking up to 1400 MHz
Be very careful with voltage settings. UnderVolting usually causes bad things..
Slide2Wake is now automatically disabled while on a call. (Modded for less battery drain)
Native USB Tethering.
Native Wi-Fi Tethering
File systems support: Ext3/4, FAT32, NFS, CIFS, NTFS
Added tweaks to increase I/O Speed.
Added tweaks to increase CPU speed
Removed all the debuggers
Better picture quality thanks to camera tweaks
BLN without Wakelock - see STweaks BLN tab to activate.
Touch Keys Light change with the screen brightness
MMC_CAP_ERASE not present
Sound boost controls in STweaks.
Added mdnie interface and made hardcore’s sharpness tweaks optional
5 GPU FREQ Steps from 108Mhz to 520Mhz
Ultra KSM from 3.9.y kernel.
[/LIST]
Installation Instructions:
Wipe cache
Wipe dalvik
Install AJK - DO NOT REBOOT YET...
While still in recovery, go to advanced and reboot recovery
After recovery has been restarted, go into kernel specific options and Reset ExTweaks profiles
Fix permissions in recovery
Reboot and enjoy the new kernel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NoSwap - for Cooked and AT&T stock JB
MicSwap - for ShoStock3 and other ported i9100 ROMs
AOSP - for any AOSP ROM, such as CM10.2
AJK v4.9 NoSwap
Dev-Host
Goo
AJK v4.9 MicSwap
Dev-Host
Goo
AJK v4.9 AOSP
Dev-Host
Goo
NOTE: Changelog information for builds prior to v3.2 was somehow deleted while the thread was closed (at my request...) for a short while.
I will try to recover the lost changelog information and add it as I can.
Changelog:
v5.0 (in development)
Updated ROM compatibility - now works on all current ROMs
Fixed SoD when using ZZMOOVE as sleep governor
Imported the latest Samsung ramdisk files
Fixed an issue where profiles might be reset
- Any further profile issue MUST be due to a ROM or rogue app issue.
- The logs I have seen are indicating that the profile was deleted by something. Kernel is not capable of this...
v4.9
Fixed JB_Sound_Fix on Samsung based ROMs
Fixed a small profile issue
Fixed an issue with CPU grouping
Improved ROM compatibility
Misc fixes & tweaks
New battery profile
New performance profile - Highly recommended! Great performance & very good battery life!
GPIO pin definitions fixed
There's more but I forgot to write it down as I went...
v4.8
Small FileSystem tweak
Improved ROM compatibility
Disabled the boot logo for now
v4.7
Fixed various issues with CM10.1.3 RC2
Sync'd CM10.x init files with CM sources
Set ROOT to default ON for CM10.2
Updated ZZMOOVE to v0.7d
Set default profile sleep scheduler to BFQ
New Battery profile, based on ZZMOOVE v0.7d
New boot logo by Teknodad1974
v4.6
Tuned battery & performance profiles a bit
Tweaked CortexBrain
Fixed a small profile bug
Updated ZZMOOVE governor
-new ZZMOOVE governor is VERY smooth (smoothest gov I have found), uses slightly more battery than Hyper.
v4.5
Nice new boot logo by Teknodad1974
Recovery background remains plain black to make it easier to read recovery text
Fixed a small issue with recovery
Added exFAT support
Updated governors & i/o schedulers
Updated profiles
Updated Stweaks
Added the Dorimanx implementation of CPU Voltage Groups. This will let people see why some phones UV easily and some cannot UV.
v4.4
Added support for Android 4.3
Some code cleanup
Tweaked touchscreen and display to improve smoothness
v4.3
Reverted part of the frequency cleanup as it caused a slight hesitation in the UI
v4.2
Bugfix - corrected CPU frequency table
Boots & settles in much faster now
v4.1
Undervolting has been given a reprive thanks to topiratiko & samprocat
Use UV with CAUTION and expect no support when using UV
CPU frequency table has been tuned down to 6 primary frequencies for efficiency
CPU voltages have been corrected in the profiles to account for the new frequency table
Fixed mic swapping (MicSwap version only, obviously)
Due to the changes made to the CPU frequency table and the CPU voltage table,
it is CRITICAL that you follow the installation instructions exactly as outlined here.
S959G users please ask for assistance from more experienced S959G users
if you need assistance..
PLEASE do not just ignore the need for profile resets!
This version will start off slow (possibly VERY SLOW) and will speed
up as it settles in. First boot can take a LONG time. This is both normal and expected.
v4
Project "SMOOTH UI" is now complete!
You should notice better performance in every way. If not, you're doing something wrong!
Fixed poor performance on Samsung ROMs - they did not like the OOM settings in v3.9 .
Any trouble reports that do not include a logcat will be ignored.
v3.9
New boot logo by Teknodad1974
Corrected the context on the Stweaks->Screen tab
Removed BLN "blink" and "fade" options as they do not work on our phones
Added a new "AJK Tweaked" OOM profile (Stweaks->Memory tab)
Most people will see a nice improvement from the new OOM profile
Slide2wake fix should be functional now
Ad-Block is expanded & updated. This is a complete ad blocking solution now
Ad-Block can be added/removes d in Stweaks->Other
Ad-Block can be updated automatically via setting in Stweaks->Other
v3.8
AKA: THE ONE
Nightmare has been tuned and should be much more stable now
Added ZZMOOVE governor by ZaneZam (a great battery or sleep governor)
New topiratiko tuned profile
MAJOR smoothness improvements made by Project "SMOOTH UI"
Re-added Touchscreen Sensitivity setting in Stweaks
Added touchscreen revision detect button in Stweaks -> Screen
Added additional touchscreen settings for different touchscreen type
Many thanks to the testing team for working hard and relaying good
information for me to build upon. :highfive:
Special thanks to topiratiko for providing invaluable information
and letting me bug him into the wee hours of the mornings
testing new kernels. :good:
v3.2
WiFi toggle bug is a thing of the past (has been for weeks now on AJK actually...)
Slide2Wake is now disabled while you are on a call.
New Mali V2 drivers - best graphics performance on the i777.
S4 code implemented for WiFi.
I will have to populate this later as it somehow got removed while
my thread was locked for maintenance.
Some suggested reading:
A Comprehensive (but not by any means definitive) Guide to Wakelocks
Please remember that this kernel was created for my friends & family to use, and I also share it here.
You are not obligated to use it. If you do decide to use this kernel, that does not give you the right to be disrespectful.
Please report any bugs that you find, and be sure to include a last_kmsg and/or logcat...it is impossible to troubleshoot without it.
Reporting something 1 time is sufficient. If someone else has already reported it, you do not need to re-report the same bug.
Remember the 2 primary rules here on XDA are:
1) Be respectful.
2) Use the search functions - both the XDA search and Google.
If you are experiencing issues that no one else is having, then it is not the kernel at fault....
Special thanks to:
Entropy512 (CyanogenMod, kernels, much more for the community)
Gokhanmoral (Siyah Kernel)
Dorimanx (Dorimanx Kernel)
@razen_kain for all the feedback & support (to everyone here)
@mr-cook for all he does for the SGSII community
@topiratiko for his tireless testing, great feedback & support and the topiratiko profile
@4-2ndtwin for his tireless testing, great feedback & support
@samprocat for his tireless testing, great feedback and tremendous support.
And a special thanks to all the donators. Your donations are greatly appreciated!
​
ROM Devs:
I request that anyone who includes this kernel in a firmware release does the following out of courtesy:
1) Link to this thread
2) Clearly indicate in your firmware changelog which AJK version is included in your firmware release. This lets users identify whether a fix is present in the kernel they're using or not.
Kernel source new repo available here.
Use the "master" branch.
Compiled using the supplied linaro 12.x toolchain.
Touchscreen Tuning process
1. Open ExTweaks
2. Select Screen tab
3. Go to "Batt Move Filter", increase it BY ONE and apply
4. Test it, if it still stutter, increase ONE STEP ONLY and apply
5. Repeat step 4 till the stutter/jitter is gone. Don't set it too high as it'll result the touchscreen capability lost
6. If "Batt Move Filter" is OK without any jitter again, connect your charger and go to "Chrg Move Filter"
7. Repeat step 4 till you satisfied and again: DON'T SET IT TOO HIGH, ONLY INCREASE TILL THE JITTER/STUTTER IS GONE
Do this at your own risk!
If you lost the touch capability caused by too high value then you will need to reset ExTweaks profile in recovery.
I can say its different for each device as the test shown:
-My S2: Batt Filter 16 & Chrg Filter 50, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
-My son's S2: Batt Filter 13 & Chrg Filter 46, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
-My daughter's S2: Batt Filter 14 & Chrg Filter 48, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
A few battery saving tips:
Assuming that you are getting a decent deep sleep % and have no wakelocks, the single biggest way to improve battery life is to reduce the screen brightness.
Go into Stweaks and navigate to the Screen tab, then scroll down til you find GAMMA SHIFT and set this to -10 to -20 .. the darker the screen the better the battery life can be. As a general rule, keep the screen as dark as you can while still having it visible and functional.
Some other battery saving tips would include:
Set Stweaks->CPU->MAX NORMAL FREQUENCY to 800MHz. This works fine on my phone, but some people may need to bump this to 1000MHz for some apps.
Do not use Slide2Wake as this does increase battery consumption by 10% to 20% depending on which touchscreen your device has.
Make sure that you are using ZZMOOVE as your CPU-TUNING (SLEEP) governor as it gets the best deep sleep %.
Use Greenify to Greenify all your apps. This usually makes a noticeable difference.
Re: [KERNEL] Siyah-i777 v7.0 [JB] [4.2.1]
Yessssssssss I love you aj!!! Slight type on the features where it says it supports jb Mali on the second Mali it says mail
Sent from my GS4 running CM11 Kandy Kane
Re: [KERNEL] Siyah-i777 v7.0 [JB] [4.2.1]
Thanks aj gonna use it on jellybam 5.1.0
hi!
last time i did this "Reboot recovery and go into kernel specific options and Reset Stweaks profiles"
the phone sim-locked!?!
this will happen again??
Solaris_XD said:
hi!
last time i did this "Reboot recovery and go into kernel specific options and Reset Stweaks profiles"
the phone sim-locked!?!
this will happen again??
Click to expand...
Click to collapse
I am unsure of how a sim-lick can occur due to this.
To be on the safe side, try using the kernel without resetting the profiles. It *might* not cause any issues for you.
Just installed on Shostock3. So far everything works (including BLN!) except screen shot. Home+Power does not take a screen shot.
Will monitor for battery life...
jhermit said:
Just installed on Shostock3. So far everything works (including BLN!) except screen shot. Home+Power does not take a screen shot.
Will monitor for battery life...
Click to expand...
Click to collapse
Battery life has been great for the folks who have been testing this kernel for the past 4 to 6 weeks.
Remember that you may need to tweak some settings in Stweaks to get it working in a way that is good for you & your phone.
As for screenshots, try using power + vol down .
Re: [KERNEL] Siyah-i777 v7.0 [JB] [4.2.1]
Thanks man! Will install right away
Sent from my i777 using xda premium
Re: [KERNEL] Siyah-i777 v7.0 [JB] [4.2.1]
Just flashed with Slimbean RC1, so far so good.
Sent from my SGH-I777 using Tapatalk 2
AJ Newkirk said:
I am unsure of how a sim-lick can occur due to this.
To be on the safe side, try using the kernel without resetting the profiles. It *might* not cause any issues for you.
Click to expand...
Click to collapse
I ask myself the same question!!!
Re: [KERNEL] Siyah-i777 v7.0 [JB] [4.2.1]
jhermit said:
Just installed on Shostock3. So far everything works (including BLN!) except screen shot. Home+Power does not take a screen shot.
Will monitor for battery life...
Click to expand...
Click to collapse
Why not just use the screenshot option in the power menu.
Sent from my SGH-I777 using Tapatalk 2
bswann said:
Why not just use the screenshot option in the power menu.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Or that :laugh:
Thanks! Will try this out.
Re: [KERNEL] Siyah-i777 v7.0 [JB] [4.2.1]
122ninjas said:
Yessssssssss I love you aj!!! Slight type on the features where it says it supports jb Mali on the second Mali it says mail
Sent from my GS4 running CM11 Kandy Kane
Click to expand...
Click to collapse
Slight typo in the word typo...
bswann said:
Why not just use the screenshot option in the power menu.
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Because there is no screenshot option in the power menu...
Volume-+Power does not work.
AJ, YOU ARE THE MAN! I wanted to try JellyBam, but didn't want to give up Siyah. I was going to get set up to compile it for myself this morning....and just happened to notice that you had done it.....with STYLE too. Props!
jhermit said:
Because there is no screenshot option in the power menu...
Volume-+Power does not work.
Click to expand...
Click to collapse
It works fine here. Not sure why power + vol down wouldn't work for you.
great news!!!! now my i777 + hellybean will be perfect.!!!.
thanks!!!

[Kernel][AOSP][2.02 | November 2nd] Plasma kernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I. Thanks!
.
Disclaimer: I take no responsibility for any damage that might occur to your device. You proceed strictly at your own risk. This is a work in progress.​Thank you for your interest in Plasma kernel, I hope you enjoy it. I've poured hundreds upon hundreds of hours of work into putting together a kernel that best showcases our hardware. Plasma kernel would not be possible without super-smart people like AndreiLux, DerTeufel, temasek, googyanas, faux123, and the regular contributors to the official cm kernel repositories. Please donate to them to support their hard work!​.
II. Features
CPU frequency range: 100MHz to 2.16GHz
ZZMoove, PegasusQ, performance (with support for multiple cores), and LulzactiveQ CPU governors
Zen, noop, deadline, row, cfq, sio, vr schedulers
Experimental Wolfson AND Voodoo Sound support (choose one or the other on the Audio tab of STweaks, then REBOOT!)
CPU voltage control
Linux 3.0.101
AndreiLux: Screen color calibration with mdnie-control
GPU over/underclock and over/undervolt
Control the frequency and voltage of all 5 GPU steps
Support for GPU clocks from 54MHz to beyond 800MHz
Control GPU governor sampling rate
Built with 4.8 toolchain
Built with -O3 and other optimizations
Extra panel brightness (<299)
Faux123: Dynamic fsync control (v1.2)
AndreiLux: Charging control
Support for STweaks
Control screen refresh rate (can be reduced to save battery)
AndreiLux: Memory/internal voltage control interface
AndreiLux: Adaptive Body Bias (ABB) control
AndreiLux: Digital brightness control/reduction (better than ScreenFilter)
LED control (with some color mixing adjustments by me)
Touchwake support, including touchkeys (enable in Screen tab of STweaks)
Multi-touch kernel-based gesture engine
Proportional Rate Reduction for TCP
Joe's RCU
Temasek: Frandom module (enable on the Memory/Internal tab of STweaks and REBOOT!)
S-Pen settings on the S-PEN tab of STweaks
zCache
Support for 4x parallel "Turbo ZRAM" (settings are on the "I/O / RAM" tab of STweaks)
UKSM
Enhanced Touchwake/Slide2Wake functionality
Arc-swipes to turn your phone on with one hand (Screen tab of STweaks)
Long-tap-off to turn your device off with one hand (Screen tab of STweaks)
Power off gesture: tap the top of the screen and a touchkey at the same time to trigger suspend
Change your power manager (PM) CPU lock frequency
Press the home button 4 times to toggle the screen negative
Press the home buttom 3 times as fast as you can to toggle the screen into nightmode (red)
exFAT support
For more, take a look at the commits
.
III. What's NewDon't forget to check out what was new in 2.0b7 and 2.0b12!​
[ZRAM Total Disk Size]: By default ZRAM is setup as four (4x) swaps operating in parallel at equal priorities. Set this to the TOTAL amount of RAM you wish to dedicate to ZRAM, and STweaks will automatically divide it evenly by four.
[UKSM Enable]: Enable the UKSM daemon that will continuously scan memory for duplicate data.
[UKSM Daemon Sampling Rate]: How often the daemon checks for duplicate data.
[UKSM CPU Usage Limit]: How much system load (CPU usage) the daemon will use.
[Long-tap-off Always On]: Found in its own section under the Touchwake section. When enabled Longtapoff will always work, regardless of how you woke your device. Takes effect immediately.
[Many ZZMoove settings]: Many ZZMoove settings on the newly created "ZZMoove Scaling" and "ZZMoove Hotplug" tabs. Descriptions coming soon.
.
IV. Download / Donate
Support the development of Plasma kernel by DONATING if you find it useful!
AOSP 4.3.x only!
Plasma kernel v2.02 for the international Note 2 (n7100)
Plasma kernel v2.02 for the international Note 2 4G/LTE (n7105)
Plasma Gesture Pack
Support the development of Plasma kernel by DONATING if you find it useful!
​.
V. Changelog
v2.02 (November 2nd, 2013)
Tracked audio/media skipping bug to disabled loggers (thanks pappschlumpf!) By default logging is now enabled. While you can still disable it, it will always be reset upon reboot.
Changes to write-back caching (thanks temasek)
Support for switching touchkey backlight driver from ROM/kernel (bottom of Screen tab in STweaks) (thanks Yank555-lu)
Some bug fixes for Slide2Wake
​.
VI. Archived Changelogs
2013-10-29 | v2.00 7100 / n7105 LTE
Linux 3.0.101 (thanks temasek)
Hopeful bugfixes for untouchable screen, and taps on top triggering suspend
Should you encounter a problem like that, cycling on and off (power button) should now reset any state variables
Fix FC issues. Works with more ROMs, including the latest AOSP nightlies
Allow pm_idx_freq to be set as high as 1600 MHz, theoretically could slightly speed up waking from deep sleep. Set on "Plasma Tuneables" tab of STweaks
Added several new tuneable ideas to zzmoove
Added "ZZMoove Scaling" and "ZZMoove Hotplug" tabs to STweaks. The descriptions are still a work in progress
Moved mDNIe controls to their own "Color" tab
Greatly enhanced the longpressoff feature's reliability and ease of use (by upgrading to scheduled_work)
Slide2Wake and arc swipes now trigger CPU and memory frequency locks to speed up waking
Slide2Wake and arc swipes no longer accidentally send input in the milliseconds after the screen comes on, but before you finished your gesture
Added option to Screen tab of STweaks to enable Longtapoff always, regardless of how the device woken
Expanded the trigger areas for slide2wake and arc swipes
ZRAM/swap is working and compatible with "Turbo ZRAM" (4x parallel ZRAM swaps for quad core devices) (thanks googyanas)
ZRAM settings in STweaks now allows you to set one total size of RAM that will be divided into 4x ZRAM swaps. Setting to 0 disables all swaps. Changes are applied instantly. No need for any other ZRAM/swap apps or init.d scripts.
UKSM (Ultra KSM (Kernel Samepage Merging)) enabled, with settings on the "I/O / RAM" tab of STweaks. Mostly just a novelty, but what it does is continuously checks RAM for duplicate pages to save space
zCache enabled and always running
Cleancache enabled
Frontswap enabled
Enabled LOWMEM_CHECK (thanks googyanas)
Enabled SPEEDUP_KEYRESUME as discussed in temasek's thread (Placebo effect? Maybe. Better ask Brian Molko. A cookie for you if you understand that reference) (thanks googyanas)
Added my own wake-speed ideas (2-second max-CPU-speed lock, and 2-second max-bus/RAM-speed lock on KEY_POWER press)
Permanently fixed (hopefully) the laggy, skippy, media bug
Toggle negative screen mode by taping the home button 4 times quickly (but NOT as fast as you can) (based on a commit by gokhanmoral)
Toggle nightmode (red) screen mode by pressing the home button 3 times VERY quickly (pretty much as fast as you can) This is purposely designed to be a dim red, as searing bright 255 red isn't particularly easy on your eyes in the dark. Fun fact: this (and the negative one described above) are functional even during boot...triple tap to see your bootscreen turn red
CPUFreq bug fixes/commits (thanks DerTeufel)
Permanent TRIM (thanks googyanas)
Added shell scripts to quickly and easily see statistics with as little typing as possible. Open a command prompt on your device, type "su" and press enter to ascend to root. Now you can type "szc" and press enter to see zCache statistics (szc = show zcache). Or type "ssw" to see swapfile/zRAM statistics (ssw = show swap). Note: Some statistics don't fully populate until a few minutes after boot
Experimental: Set ZZMoove governor for battery savings by obtaining a root shell as described above, then typing "zzb" and pressing enter (zzb = zzmove battery). Does not reapply after reboot.
Compiler optimizations
​
​.
VII. SourceSource for Plasma kernel can be found on my github.​
XDA:DevDB Information
Plasma kernel, a Kernel for the Samsung Galaxy Note II
Contributors
ffolkes
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.02
Stable Release Date: 2013-11-02
Created 2013-10-30
Last Updated 2013-11-02
Reserved
this looks killer!
can i use this kernel on n7100?thanks
Sent from my GT-N7100 using xda premium
Looks really nice. Either post a n7100 version or get this thread moved to n7105 forum.
Sent from my GT-N7100 using Tapatalk
LOL luckily I read through the OP. If not I would've flashed this on my N7100. Please make N7100 version
What? Why u post a n7105 kernel in n7100 thread?
Gesendet von meinem GT-N7100 mit Tapatalk
Yeah another kernel in our note 2. this is for n7100 or n7105? both?
Very nice, runs absolutely great on my 7105! I love the features and the stweaks support, that's what i've searched for! Please make a version for 7100, too, to make everybody happy!
Gesendet von meinem GT-N7105 mit Tapatalk
Work with latest 4.3 leaked?
adivorandroid said:
Work with latest 4.3 leaked?
Click to expand...
Click to collapse
Have a look to the threads title please. There you find AOSP, it's not for TW ROMS, like the 4.3 leak!
wow I was going to flash this on my N7100, Thank god that I didn't flash after reading the comments.
please make it available for the N7100.
It wouldn't have destroyed your device. I already flashed n7100 kernel to my N7105, but of course I don't advise doing so.
@ffolkes: nice to see you moved over here
Gesendet von meinem GT-N7105 mit Tapatalk 2
i just tried your kernel for a couple of hours, because i wanted to know about your gesture and s2w features.
after hiting the back button it now just rebooted. attached you can find last_kamsg, which hopefully helps you
mzahmed95 said:
wow I was going to flash this on my N7100, Thank god that I didn't flash after reading the comments.
please make it available for the N7100.
Click to expand...
Click to collapse
I didn't realize this was the n7100 subforum, although now I think it serves as both? So I have added the n7100 to this thread instead of making a new thread for it.
DerTeufel1980 said:
i just tried your kernel for a couple of hours, because i wanted to know about your gesture and s2w features.
after hiting the back button it now just rebooted. attached you can find last_kamsg, which hopefully helps you
Click to expand...
Click to collapse
I'm honored you would be interested in it. Sorry it crashed on you, and thank you for the bug report. Looks like the msleep() I'm calling might be interfering with the touchkey backlight - I never ran into that problem because I always have the backlight disabled. I'll have to look into it today.
For people using gestures, don't forget to set the modifier (touchkey) delay in STweaks, otherwise gestures that require a touchkey won't work properly. I default this to 0 purposely so people who don't use gestures (majority) aren't annoyed by the delay.
hope this can run on slim rom latest stable build 2
Been trying for a while now, overwhelmed by the numbers of options in STweaks. Pretty great so far. Thanks
pappschlumpf said:
Have a look to the threads title please. There you find AOSP, it's not for TW ROMS, like the 4.3 leak!
Click to expand...
Click to collapse
i dont undestand what is aosp just wanted to know on which rom it will run ? i am on slim rom 4.3
mor_1228 said:
i dont undestand what is aosp just wanted to know on which rom it will run ? i am on slim rom 4.3
Click to expand...
Click to collapse
Slim ROM is AOSP, if you've a N7105 (LTE Note 2) you could try it.
@dev:
For me MTP isn't working, Sound is only working sometimes. Tried it with and without Voodoo sound enabled. One minute I've sound, the next minute I've no sound, hmm. Please look into it.
anybody flash this in Pacman? so how is it? booted or just nandroid back up?

[KERNEL] [Feb 19] [GPe] [SENSE] Quantum v1.25 [5.0.1][Multicarrier]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Quantum, a kernel built around the idea of performance and battery life through smart optimizations. Those who have followed my work on the Galaxy S3 will know exactly what to expect. All feature requests will be considered, and all bug reports should be accompanied by a logcat and as much information as possible, this helps out everyone and gets your problem resolved as soon as humanly possible. For now this is only for Lollipop GPe, but I may branch out to Sense at some point in the future.
Downloads- GPe
1.25- 2/19/2015
v1.23- 2/11/2015
v1.15- 1/22/2015
v1.1- 1/8/2015
v1- 1/5/2015
Click to expand...
Click to collapse
Downloads- Sense
1.25- 2/19/2015
v1- 2/12/2015
Click to expand...
Click to collapse
Changelog:
1.25
Update optimization levels, spread them farther throughout the kernel
New LCD controls from savoca, use his app to adjust
Add CPU POWER driver, enhance battery life
Add native EXFAT driver for faster SD card reads using exfat FS
Fix touchscreen issues
Optimize deadline
Selinux bug fix
Hotplugging fix
Override TCP control
LZMA compression
v1.23
Intelliplug
Intelliactive
TONS of tweaks to increase overall speed and filesystem speed
Improved app-recents loading
Bit-sliced AES with NEON support
NEON accelerated block building
Hotplugging optimizations
Touchscreen power reduction
Back to stable base, rebase whole kernel on new "stable" branch
Reduce display turn on time
Disabled logging for certain features for less text dumping
NEW overclocking 268 MHz to 2.5 GHz
GPU clocking 27 Mhz to 600, included 100 clock for a further reduction of voltage needed
Simple GPU algorithm, expose to userspace configuration
Set Powersuspend to kernel mode by default, no input needed by users
Tweaked interactive for battery life
Enable KSM
Disable ZRAM
v1.15
Revert buggy code
More slimbus overclock
GPU overclock to 600 Mhz- EvolutionMod
Drop down some clocks for better battery life
Kernel mode NEON supported- faster calculations
New toolchain
All 1.1 commits rolled into a less buggy package
v1.1
HD Audio, fix HTC audio bug
New powersuspend driver, enabled by default
Removed flar2 topology and CPU power and replace with updated and specialized topology for krait
Clean up scheduler spikes
Updated to new MSM-8974 Memutils, 10-15% performance boost
GPU driver fixes for smoother perfomance
Fix issues with PE-Workqueues, expand to another queue
Fix SELinux bugs
Fully optimize with VFP4, modified 2 lines
Fix display turn-on lag
ARM updates for Cortex-A15
Tune ROW and SIO
Reduce kernel logging
Update Interactive governor
CPUfreq updates
Update LZ4 used on local PC, contains bugfix for GCC 4.9, replaced dtb img
v1
Ported features from Quantum from S3
Initial release, all features are located in main post for now
Click to expand...
Click to collapse
QuantumKernel Features
GCC 4.9.3
Multi-carrier support
User Voltage
MSM-DCVS and AVS
CPU overclock to 2.88 GHz
Switchable FSYNC
Simple GPU Governor
FRandom
FauxSound
Sweep2Sleep, D2TW- flar2
Disable magnet event
All TCP algorithms
LCD color control
Backlight dimmer options
Governors- stock for now
I/O: SIO, ZEN, SIO, 0 ms deadline, BFQ, FIOPS,
Extreme battery optimizations from Power Efficient Workqueues to ARM Topology, and numerous others
Universal screen off frequency for any governor- flar2
Increased Sound Quality through overclocking of hardware
Much, much, more...
Click to expand...
Click to collapse
Source
Thanks to-
flar2
faux123
lyapota
savoca
HolyAngel
aeppacher
imoseyon
ktoonsez
gideonx
XDA:DevDB Information
Quantum, Kernel for the HTC One (M8)
Contributors
PwnCakes193
Source Code: http://github.com/tommytarts/quantumkernelm8
Kernel Special Features:
Version Information
Status: Stable
Created 2015-01-05
Last Updated 2015-01-05
saving for future use
And again for possible branching in the future
RSVP
Thank for bringing your Dev to us and the hard work..
Edit: Was about to install CM12 and saw this. Looks like it will blend well with each other.
Edit: postpone I see it's only for the GPe variant. I'm not s-off. Smh
info[]box1 said:
RSVP
Thank for bringing your Dev to us and the hard work..
Click to expand...
Click to collapse
I see you used a BlackBerry Bold, which hybrids did you use?
Works on verizon, if anyone is wondering.
PwnCakes193 said:
I see you used a BlackBerry Bold, which hybrids did you use?
Click to expand...
Click to collapse
Can't drop a name at the moment. But over at bbhyrids and one of the main maintainer and hybrids cookers. He was making some nexus roms while back.
Edit: irtehun I believe
Pwncakes, you look vaguely familiar...were you using LG OpT, HTC I4G, SG Note, or LG OpG ? I've seen your name before
Didn't mean to clog your thread w/ useless nonsense, but was entirely to lazy to message you (anyways thank you for the contribution) Anything in the kernel that would make it incompatible w/ 4.4 roms ?
Pwn! I ran your stuff exclusively on my s3. Great to have you here!
Has anyone used this kernel yet?
PWN!! I'm so stoked to try this baby out! Will report back asap
jxcorex28 said:
Pwncakes, you look vaguely familiar...were you using LG OpT, HTC I4G, SG Note, or LG OpG ? I've seen your name before
Didn't mean to clog your thread w/ useless nonsense, but was entirely to lazy to message you (anyways thank you for the contribution) Anything in the kernel that would make it incompatible w/ 4.4 roms ?
Click to expand...
Click to collapse
None of those, only the S3! and if Lollipop kernels work on 4.4.4 then this should as well.
Bobbi lim said:
Has anyone used this kernel yet?
Click to expand...
Click to collapse
Only a few are using it, but I have been using v1 since Christmas and I've had 0 issues so far, no reboots or anything of that nature.
shiniyoyo said:
PWN!! I'm so stoked to try this baby out! Will report back asap
Click to expand...
Click to collapse
Great to see the old gang from the S3 moving over here, I still have more goodies left for everyone, I will release my interactive tunables later today. With these tunables I get around 4 hours SoT over a 2 day period, or around 10 in a 24 hour period.
info[]box1 said:
RSVP
Thank for bringing your Dev to us and the hard work..
Edit: Was about to install CM12 and saw this. Looks like it will blend well with each other.
Edit: postpone I see it's only for the GPe variant. I'm not s-off. Smh
Click to expand...
Click to collapse
If your s-off can u flash it on aosp?
JazzieBoi said:
If your s-off can u flash it on aosp?
Click to expand...
Click to collapse
The kernel will play nicely with anything as long as it's a GPe base. So Skydragon and others are compatible... this won't work on Sense ROMs and CM-based CAF ROMs yet.
downloading and flashing now. will report back later. thank you @PwnCakes193 for work and time. currently on spirit ROM , unlocked , superCID , s-off , latest FW , superSU v2.40.
nope. spirit must be cm based though OP doesnt mention. have to find another ROM.
i NEED my rabbits !!!!!!!!!!!!
"all i can really do , is stay out of my own way and let the will of heaven be done"
PwnCakes193 - nice to see you here - I've used your Quantum ROM on my S3 ( ages ago )
Sent from my HTC One_M8 using XDA Free mobile app
Thanks
Thanks so much! What app do you use to control the kernel?
Kernel working great! only bug Ive noticed is slide to sleep and slide to wake isnt working even when selected in TricksterMod.
mauserruger said:
Thanks so much! What app do you use to control the kernel?
Click to expand...
Click to collapse
trickstermod is gooood.
"all i can really do , is stay out of my own way and let the will of heaven be done"
PashaF said:
PwnCakes193 - nice to see you here - I've used your Quantum ROM on my S3 ( ages ago )
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Awesome to see familiar faces. Hope to see you around the thread more often as well! Let me know about anything you'd like to see in the kernel.
mauserruger said:
Thanks so much! What app do you use to control the kernel?
Click to expand...
Click to collapse
Trickstermod and initd tweaking. Looking into faux clock soon.
shortyboy said:
Kernel working great! only bug Ive noticed is slide to sleep and slide to wake isnt working even when selected in TricksterMod.
Click to expand...
Click to collapse
Change it via initd, Trickstermod is wonky with it for some reason. Sorry for the inconvenience!

[ROM][7.1.2] AOKP Nougat with built in sidebar launcher! [tbltexx]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To God be the glory, my AOKP NOUGAT project finally works!
This is not a dirty unicorn. This is the original unicorn, the AOKP. Now made out of Nougat! That's right, all of the AOKP stuff you love, plus LineageOS, plus a built in side bar, and more! All wrapped up into one! With tons of settings from status bar tweaks to button remaps, it's all here and ready to rumble!
**** This is an UNOFFICIAL ROM. Install at your own risk! ****
You must be on a 6.0.1 Bootloader with a 6.0.1 modem! I suggest if you are unsure, flash stock 6.0.1, then install this ROM!
Downloads :
THE AKLU KERNEL CAN BE DOWNLOADED HERE (OPTIONAL - BUT DOES FIX WIFI HOT SPOT ISSUE) :
https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419
NEW ROM DOWNLOAD:
http://www.mediafire.com/file/9zzsqgbtgvtgq9k/aokp_tbltexx_nougat_unofficial_2017-05-01_1223.zip
OLD Download:
https://www.mediafire.com/download/s29ujxni2lc0smd
Gapps link:
http://opengapps.org/
-Which I personally tested Arm 7.0 Nano.
Data Fix (For T-Mobile phones):
https://forum.xda-developers.com/no...ment/ril-data-fixes-6-0-1-bootloader-t3546110
However, the T-Mobile variant already has it's very own version of this rom in the T-Mobile thread! I did test this however, and it works.
Be sure to follow these installation steps very carefully, as they may be different then what you are used to.
Installation instructions:
-Put your phone on the 6.0.1 Bootloader and Modem
-Download ROM and gapps, and put them on your phone or external storage.
-Reboot into recovery mode - TWRP (I personally installed this using Mickey's 3.0.0-0).
-Backup what you had. (Just to be safe.)
-Wipe. (I personally wipe everything prior to flashing new roms, but at least do the basic wipe.)
-Install Rom.
-Install Gapps. - Optional
- If using the kernel, let the rom boot, then come back to recovery and flash the AKLU kernel.
- If using another variant, let the rom boot, then come back to recovery and flash a data zip.
-Reboot to system and enjoy!
I do not recommend installing superSU on this ROM! SU permission is already built in, and superSU has been causing problems with the rom. Please read the thread for further details.
What works :
Code:
+ Phone calls/receiving
+ Data 2g/3g/LTE
+ Bluetooth
+ WiFi
+ MTP
+ GPS/Glonass
+ S PEN
+ The WiFi hotspot does work with the AKLU kernel.
etc....
What doesn't :
Code:
- The edge panel is not implemented at this time. The screen wraps around the edge.
But there is an app bar feature under ROM CONTROLS!
- The capacitive buttons work, but do not illuminate.
- The WiFi hotspot does not work with the stock kernel, but does with the AKLU kernel.
- Fingerprint sensor is really flaky. I got it to work once with fingerprint scanner tools to turn on the flashlight, but only once. Most times it will not register.
- I have not found any big errors, fault crashes, or problems yet. Please let me know if you find an issue!
This AOKP N ROM was built for the tbltexx, the International Samsung Galaxy Note Edge. I have not tried this on any other device, but you are welcome to try it AT YOUR OWN RISK. You may need to edit the META-INF updater script to accomplish this. Note, this can flash directly to the T-Mobile variant, but the T-Mobile variant has it's own thread with this rom: https://forum.xda-developers.com/no...evelopment/rom-aokp-nougat-built-bar-t3558263
Code:
Disclaimer: AOKP is not responsible for any damages to your device.
All of my work is completely available for any who wish to use or modify it. I didn't make AOKP, the device trees, or vendor blobs. I simply used and edited existing material. A huge thanks should go to those who actually created this stuff.
AOKP XDA Forum: http://forum.xda-developers.com/aokp
Source Code: https://github.com/AOKP
Official website: http://aokp.co/
Device trees: https://github.com/alaskalinuxuser/
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.10.40
Based On: LineageOS and PA, and AOSP.
Created 2017-02-16
Last Updated 2017-05-02
Change log:
Code:
20170501
+ Edited camera settings to help with third party apps that use the camera.
20170428
+ Fixed recent button.
20170427
+ Synced with AOKP source!
--> Security update to April 5th, 2017
--> New battery icon options.
--> New powermenu torch option.
--> Long press hotspot tile to go to hotspot settings.
+ Added kexec hardboot to both default and AKLU kernels to allow this to work with multirom.
+ Borrowed from mickey to fix the notification led lights for proper color display.
20170316
+ Synced with AOKP source!
--> Security update to March 5th, 2017
--> Numerous AOKP fixes for the ROM itself. See the change-log under Rom control.
+ Added in possible VOIP fix for voip app problems.
20170302
+ Synced with AOKP source!
--> Merged with Android 7.1.1_r21
--> Added PIE controls
--> Security patches updated to Feb 5, 2017
--> Now FULLY supports OMS/SUBSTRATUM
+ Screenshot issue fixed
+ SDcard read from File Manager fixed[/QUOTE]
20170216:
-First build release.
Thanks!
A huge thanks to the Android Open Kang Project team!
@OldDroid
@Mickey387
@deadman96385
And all of these great testers (some for other devices, not all helped me test this rom, but helped me test the Note Edge in general, as well as provided valuable feedback!) :
@Aaren11
@xNNism
@beany23
@swecon
@1freedude
@lostinlife33
@faizan'
@gavin10
@brainwasher01
@hosny1964
@xcube1
Features and Screenshots!
Features and Screenshots!
- Advanced Reboot
- Omni-Switcher
- Kernel Adiutor
+ Rom Control:
+ App Launchers
- App Circle Bar
- App Side Bar
- Gesture Anywhere
+ General
- cLock settings
- Screenshot settings
- Recents settings
- Wakelock Blocker
+ Hardware Keys
- Backlight control
- Power button options
- Launch vibration control
- Home button controls
- Recents button controls
- Long press options, double tap options
- Kill app back button option
- Volume buttons wake
- Volume button playback controls
- Keyboard cursor controls
- Volume button reorientation
- IME features
+ Lockscreen
- Media Cover art
- Display music visualizer
- Show weather
- Blur background
- Fingerprint auth vibration
- Double tap to sleep (DT2S)
- Disable quick settings
- Show lockscreen clock and date
- Lockscreen notification count
+ Notification Drawer
- Brightness slider
- Brightness icon
- Rows in portrait and landscape modes
- Columns
- Tile Animations
- Advanced data tile
- Smart pulldown
- Quick pulldown
+ Pie Controls
- Pie Style
- Pie targets
- Pie color settings
+ Power Menu
- Animation choices
- Screenshots
- Screenrecord
- Airplane mode
- Sound Panel
+ Sound
- Various sound settings
- Volumn step control
+ Status Bar tweaks
- Network traffic
- Clock style
- Double tap to sleep (DT2S)
- Superuser indicator
- Icon controls
- AOKP logo
+ User interface
- Toast controls
- AOKP animations
- Transparency controls
- Changelog
Notes.
A place for rom notes....
Background image:
https://qlfiles.net/2017/01/07/upload-fractal-images/
The background images that I used in this ROM came from the Quiet Learner. You should check out his mathematical artwork, including 3D mandelbox images!
If the screen looks red-ish, check the settings->display->live display options, you may want to turn them off, it is a low light sensitive display option.
Data Zips: T-Mobile users with device model = unknown:
If you are using a N915T (like myself), the fix is very easy!
-Open /system/build.prop in any text editor
-Anywhere in the file, add this line:
Code:
ro.build.model=SM-N915T
Save and exit, then reboot your phone. You can check "about phone" under settings, you should see yourself as SM-N915T, and apps like XDA should report you as Samsung Galaxy Note Edge.
Apps:
Swiftkey Keyboard - This keyboard can be set so the keyboard does not wrap around the screen.
https://play.google.com/store/apps/details?id=com.touchtype.swiftkey
Spen Command - This app cost a few dollars, but enables the Spen to be somewhat smart again, rather than just a pointer stick.
http://www.emandt.net/Android/SPenCommand/Website/
If you find something else that will help other users, please let me know by posting in the thread!
Hey everyone!
The AKLU kernel is online for the AOKP 7.1.1 Nougat rom! It fixes the WiFi hot spot issue!
https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419
20170217
- Fix WiFi hot spot error for Nougat.
- Overclocked the GPU from 600MHz to 633MHz
- Overclocked the CPU from 2649MHz to 2688MHz
- Added governors: Bioshock, Lionheart, Nightmare, Darkness
- Removed input boost, use cpu boost instead
- Added I/O schedulers: FIOPS, ZEN
AlaskaLinuxUser said:
Hey everyone!
The AKLU kernel is online for the AOKP 7.1.1 Nougat rom! It fixes the WiFi hot spot issue!
https://forum.xda-developers.com/no...droid-development/kernel-aklu-kernel-t3558419
20170217
- Fix WiFi hot spot error for Nougat.
- Overclocked the GPU from 600MHz to 633MHz
- Overclocked the CPU from 2649MHz to 2688MHz
- Added governors: Bioshock, Lionheart, Nightmare, Darkness
- Removed input boost, use cpu boost instead
- Added I/O schedulers: FIOPS, ZEN
Click to expand...
Click to collapse
When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?
Hi... this ROM is also compatible with the model Verizon, Sprint, US Cellular (SM-N915P, SM-N915V, SM-N915R4)?! Thanks!
come from rr 5.8
Hi i tested this rom now for a few hours and it runs very smooth. For the moment i did not find any issues.
Thanks for this nougat rom
beany23 said:
When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?
Click to expand...
Click to collapse
By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.
Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.
As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.
pickandrew said:
Hi... this ROM is also compatible with the model Verizon, Sprint, US Cellular (SM-N915P, SM-N915V, SM-N915R4)?! Thanks!
Click to expand...
Click to collapse
Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.
xcube1 said:
Hi i tested this rom now for a few hours and it runs very smooth. For the moment i did not find any issues.
Thanks for this nougat rom
Click to expand...
Click to collapse
And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated!
beany23 said:
When u say built in sidebar what do u mean? And I would love to try it but I really want an overclocked kernel something like
2.9ghz or so with GPU overclocked to around 750-800. The reason being is that when I use the emotion kernel I get insane GPU scores, around 26,000 compared to the 19,000 range with the aokp kernel. If u could do that I would s**t my pants lol. I would do it but I can't seem to figure out how to build the kernel and since u upgraded to the new 6.0 bootloader does your kernel building guide got updates on that so I can at least give it a shot again?
Click to expand...
Click to collapse
By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.
Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.
As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.
pickandrew said:
Hi... this ROM is also compatible with the model Verizon, Sprint, US Cellular (SM-N915P, SM-N915V, SM-N915R4)?! Thanks!
Click to expand...
Click to collapse
Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.
xcube1 said:
Hi i tested this rom now for a few hours and it runs very smooth. For the moment i did not find any issues.
Thanks for this nougat rom
Click to expand...
Click to collapse
And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated!
I installed the ROM yesterday. I came from the European/German Version MM 6.0 N915FYXXU1DPE1_DBT. I followed the instructions on the first post and had no problems. I installed the AKLU-Kernel, too.
There's no edge and the fingerprint works bad. Finally I'm only working with a PIN. But the ROM is fast, stable, slim and it runs very smooth. I hope, that the development of this ROM goes on.
Next I try the implemented edge-feature and the hint for SPen-using by a third-party app. And perhaps I'll format the sd-card as internal storage. But for that I need a better card.
Thank you very much for this great work. :good:
AlaskaLinuxUser said:
By side bar app, I do not mean the "edge" panel, but with the popularity of edge style phones, the AOKP has implemented a type of panel that when you tap the curved edge of the screen, a pop out drawer of your selected apps shows on the edge area.
Yes well, my kernel is a bit more on the conservative side. But, as always, I do encourage everyone to start building, it's really fun and rewarding.
As for the build instructions, they are the same, just with the new material, so I will not be updating them at this time.
Good question. In a word, no. However, another user in the data zip thread (referenced in op) successfully used the data zip to flash an international ROM to his us cellular phone. You can read more about it there.
And thank you for the kind words. I build these for fun, but it is nice to know that they are appreciated!
Click to expand...
Click to collapse
So I can build using the guide and it will be the 6.0 kernel source? Or the 7.1 source?
Knickelei said:
I installed the ROM yesterday. I came from the European/German Version MM 6.0 N915FYXXU1DPE1_DBT. I followed the instructions on the first post and had no problems. I installed the AKLU-Kernel, too.
There's no edge and the fingerprint works bad. Finally I'm only working with a PIN. But the ROM is fast, stable, slim and it runs very smooth. I hope, that the development of this ROM goes on.
Next I try the implemented edge-feature and the hint for SPen-using by a third-party app. And perhaps I'll format the sd-card as internal storage. But for that I need a better card.
Thank you very much for this great work. :good:
Click to expand...
Click to collapse
Thanks for the kind words, I'm glad you like it. The edge is a Samsung propriety function that we cannot use.
beany23 said:
So I can build using the guide and it will be the 6.0 kernel source? Or the 7.1 source?
Click to expand...
Click to collapse
Use the nougat source from my github to build the aklu kernel. I also recommend the 4.8 arm eabi toolchain.
When the lock screen wake up automatically to show a notification, the display is very dark. Is there a setting to change this?
Thank you
Apropos, the SPenCommand-app from post 1 is very good. Better than the original tool from Samsung itself.
Gesendet von meinem unknown mit Tapatalk
can î use this rom on n9150?
Knickelei said:
When the lock screen wake up automatically to show a notification, the display is very dark. Is there a setting to change this?
Thank you
Apropos, the SPenCommand-app from post 1 is very good. Better than the original tool from Samsung itself.
Gesendet von meinem unknown mit Tapatalk
Click to expand...
Click to collapse
Yes, I see that too. I am investigating.
yuhaqyaa said:
can î use this rom on n9150?
Click to expand...
Click to collapse
I do not know for sure. You can try, but you may need to edit the updater-script.
Hope that helps!
Loaded up the TMO version and so far is running smooth with the exception of some weirdness around the back and recent apps hw buttons. They seem to be acting properly but are not lighting up. I went into ROM control and tried to adjust. Interestingly when I have the screen open for adjusting time on they do light up, but then go black again after closing the adjustment box. There is also no vibration when hitting those 2 buttons. Im not getting anything useful in the logs that I can see. I tried reflashing but no change in behavior. Any suggestions? Am I the only one seeing this?
By the way, this rom supports substratum (oms).
I tested the inversion ui theme successfully.
I can confirm, that the lights don't go.
Is the battery drain better with the original kernel from the rom? The AKLU kernel is fast and hungry.
Knickelei said:
I can confirm, that the lights don't go.
Is the battery drain better with the original kernel from the rom? The AKLU kernel is fast and hungry.
Click to expand...
Click to collapse
Yes, I also see that only the red led and yellow led are working for notifications. I'll take a look at that later as well. Thanks for the feed back!
As for the kernel, the cm kernel is something I don't use much, so I am not too sure how it is on battery.
I too had a battery drain issue, but when I agent to the battery stats I saw that the phone was waking up all the time. I then realized that my email app, blue mail, was not optimized, nor was my freelab messenger, once I optimized those, the battery life improved. I do agree though, it could be better.
As I am sure you know, your settings, like in kernel adiutor, will have a significant impact on your battery. The default settings are aggressive.

[KERNEL][AOSP-11/MIUI-STABLE] Quantic Kernel [19/07/21][4.19.197]

Welcome to Quantic a Kernel built specially for Redmi k30 PRO/ POCO F2 Pro codename: lmi
One of the most used kernel on Custom ROMS on Cepheus chosen by developers and one of the most battery friendly on Redmi k20 Pro community​
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 11 (Excluding MIUI)*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it with their preferred AOSP ROM(See details below)
FEATURES
Fixed Camera not working on AOSP ROMs
Reduced logging events
Deleted Focaltech touch testing driver
Swapped scheduler from WALT to Pure PELT (No google implementation)
Enabled ZRAM up to 2GB with lz4 compressor
Upstreamed lz4 compressor
Removed log events on drm by XiaoMi
Android Binder tweaks
ion and iommu rewrittes by kerneltoast
Using new efficient minimum CPU Frequencies
Deactivated CAF CPU Boost following MIUI stock kernel parameters
Deactivated MSM_Performance
FIX CPU Capacity issues
Frame commit, touch request, display rendering and drm are processed using big cores to achieve performance at the lowest energy consumption
Cleaned up XiaoMi code from Android 10
WARNING: This kernel is a forward port of the old MiCode release from Xiaomi (from sm8250.0 tag to SMxx50.0 tag) with some missing stuff reversed by custom code, which can lead into unwanted and NOT reported bugs, be careful, this kernel is a release for people that wan't to test new and distinct development stuff and to have a little preview of what we could achieve with a newer source from XiaoMi, PLEASE KINDLY REVIEW BUGS SECTION.
INSTALLATION PROCEDURE
Make a TWRP backup of BOOT and DTBO partitions
Flash Quantic-Kernel_rX.zip
Reboot to system
Enjoy it
BUGS:
WiFi broken
Some people may experience that mic is not working on CALLS (only happens on dialer app)
NOT WORKING ON MIUI A11 ?
DOWNLOAD HERE: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250/releases/tag/r3.1
TELEGRAM CONTACT
https://t.me/aicplmi <-- Discussion group for support
Thanks List
To kdrag0n
To kerneltoast
To alk3p
To @TeamMex
To Dynescape
SCREENSHOTS ATTACHED BELOW
XDA:DevDB Information
Quantic Kernel, Kernel for the Redmi K30 Pro
Contributors
Ayrton990
Source Code: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250 (branch QK-eleven)
Kernel Special Features:
Version Information
Status: Alpha
Current Beta Version: r1
Beta Release Date: 2021-02-26
Created 2021-02-26
Last Updated 2021-07-19
You like my work? gift me a coffee by PayPal
Or you can simply hit the like (thanks) button to promote me on XDA Forums
Reserved 2
@ poster
Great Work, been awaiting a custom kernel to calm my itch abit, looking forward to seeing this progress, installing it on Octavi OS rn, ill check back with a review
efinityy said:
@ poster
Great Work, been awaiting a custom kernel to calm my itch abit, looking forward to seeing this progress, installing it on Octavi OS rn, ill check back with a review
Click to expand...
Click to collapse
Didn't boot on Octavi OS, Didnt have time to pull a kmesg, I'll get to it this evening
Great work, hope it will be completely finished soon. Thanks
OnT: works great on latest derpfest rom, except for wifi ofcourse. UX feels alot smoother and battery drain on standby is notably reduced.
efinityy said:
OnT: works great on latest derpfest rom, except for wifi ofcourse. UX feels alot smoother and battery drain on standby is notably reduced.
Click to expand...
Click to collapse
Thanks for feedback, mate
THREAD CLEANED
@dhaern @efinityy I read the messages and while I understand what you both were trying to say and where you guys are coming from, but please make sure that you're mindful of words you use to make sure they're not coming off as demanding, offensive, hateful, mocking.. well, you get the drift. I implore you both to re-read Rule 2 of the Forum Rules.
This is just a friendly reminder to keep it civil, on-topic and refrain from putting fuel to fire by responding to posts that you think don't belong in the thread. Just report if you feel something isn't right and let us take care of it for you, so that we can make your experience on the forum better.
Now let's all take a deep breath, and get back on topic, shall we? Thanks guys!
Regards,
shadowstep
Forum Moderator
realy want to try this kernel but will be wifi fixed soon?
Thanks fot your effort dev.
You are only one who keep developing kernel for poco f2 pro
I have request I don't if it could be done or not
Many users complain green tint and black crush display and I figured out it may be something to be edited in display refresh rate and total pixels (like CRC app for overclocking refresh rate for windows)
when aggressive refresh rate is done or excess of total pixels added the screen turns to defects like tints and color crush
So if you can decrease total pixels untill reached it is minimum limit it will solve these defects for poco f2 pro displays
magaedy said:
Thanks fot your effort dev.
You are only one who keep developing kernel for poco f2 pro
I have request I don't if it could be done or not
Many users complain green tint and black crush display and I figured out it may be something to be edited in display refresh rate and total pixels (like CRC app for overclocking refresh rate for windows)
when aggressive refresh rate is done or excess of total pixels added the screen turns to defects like tints and color crush
So if you can decrease total pixels untill reached it is minimum limit it will solve these defects for poco f2 pro displays
Click to expand...
Click to collapse
This sounds interesting, as this is an issue i have alot, especially with DC dim turned on, spotify for example has a green hue from top to bottom, fading the further down you go
EDIT; upon looking through the commits i can see some fiddling is done with the screen, hopes are high
efinityy said:
This sounds interesting, as this is an issue i have alot, especially with DC dim turned on, spotify for example has a green hue from top to bottom, fading the further down you go
EDIT; upon looking through the commits i can see some fiddling is done with the screen, hopes are high
Click to expand...
Click to collapse
Where this fiddling is done and by whom ?
magaedy said:
Where this fiddling is done and by whom ?
Click to expand...
Click to collapse
in the OPs source github link.
efinityy said:
in the OPs source github link.
Click to expand...
Click to collapse
guide us, master, and show directly path for our dream
Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
CAFest Kernel for Xiaomi-SM8250 based on LA.UM.9.12.r1-08000-SMxx50.0 Tag - Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
github.com
there you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
efinityy said:
Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
CAFest Kernel for Xiaomi-SM8250 based on LA.UM.9.12.r1-08000-SMxx50.0 Tag - Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
github.com
there you go
View attachment 5251009
Click to expand...
Click to collapse
and with uat help?
New Quantic Kernel Update is out with bugfixes:
Changelog
- Fixed broken WiFi
- Fixed mic on audio calls
- Upstreamed LTS to 4.19.188 (Learn why is important to merge LTS to Linux Kernel: https://source.android.com/devices/architecture/kernel/releases?hl=en#long-term-stable-kernels)
- Upstreamed CAF Tag to: LA.UM.9.12.r1-11000-SMxx50.0
- Latency improvements on UI
- f2fs substantial speed improvements
- Support for TTL data fixation
- Added FOD command fixation on dtbo. FOD now should be reliable than before.
- WALT Scheduler tweaked to reduce latency through tasks
- Affine touchscreen IRQs to the prime CPU cluster
- Optimize interrupt dispatcher by assigning pm_qos as low latency and to avoid cpu idle on interrupts requests.
- Set BBR as default algorithm for TCP Congestion
- Drop some non-eficient and unused defconfigs
- Fix some dynamic allocations
- Swtiched to SLMK to avoid apps closing from the background
- Fix battery drain present when locking device with LTE only enabled by fixing an unbounded workqueue
- Use LZ4 algorithm for ZRAM and set by default 2GB instead of 3GB
- Fix a Important race condition on DRM to avoid security exploits
- Disabled AUDIT as selinux is no more dependent of it.
- Using SD865+ GPU Max frequency
- Reduced logs to the minimum to reduce performance overhead
- Imrpoved UFS performance by optimizing current driver and scrapping out XiaoMi's jank code.
Download here: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250/releases/tag/r1
Donate here: paypal.me/ayrton990
Telegram group for support: t.me/aicp_lmi
Regards, Ayrton!
Doesn't work with hentai os. Doesn't boot.
wifi work now? sombody on shapeshift 2.4 ? work?

Categories

Resources