[KERNEL][AOSP-11/MIUI-STABLE] Quantic Kernel [19/07/21][4.19.197] - Xiaomi Poco F2 Pro (Redmi K30 Pro) ROMs, Kernels,

Welcome to Quantic a Kernel built specially for Redmi k30 PRO/ POCO F2 Pro codename: lmi
One of the most used kernel on Custom ROMS on Cepheus chosen by developers and one of the most battery friendly on Redmi k20 Pro community​
/* I'm not responsable for any damage on your device, for X or Y reason, also I'm not responsable if you loose your alarm and got fired and also the thermonuclear war, anything like that, installing this kernel you renounce to make me responsable of any unwanted behavior of your device */
/*Compatible ONLY with Android 11 (Excluding MIUI)*/
Hi everyone, I want to introduce you my new kernel named Quantic-Kernel, this is my personal build kernel with my prefered features. Hope everyone enjoy it and I'll be maintaining it so people can used it with their preferred AOSP ROM(See details below)
FEATURES
Fixed Camera not working on AOSP ROMs
Reduced logging events
Deleted Focaltech touch testing driver
Swapped scheduler from WALT to Pure PELT (No google implementation)
Enabled ZRAM up to 2GB with lz4 compressor
Upstreamed lz4 compressor
Removed log events on drm by XiaoMi
Android Binder tweaks
ion and iommu rewrittes by kerneltoast
Using new efficient minimum CPU Frequencies
Deactivated CAF CPU Boost following MIUI stock kernel parameters
Deactivated MSM_Performance
FIX CPU Capacity issues
Frame commit, touch request, display rendering and drm are processed using big cores to achieve performance at the lowest energy consumption
Cleaned up XiaoMi code from Android 10
WARNING: This kernel is a forward port of the old MiCode release from Xiaomi (from sm8250.0 tag to SMxx50.0 tag) with some missing stuff reversed by custom code, which can lead into unwanted and NOT reported bugs, be careful, this kernel is a release for people that wan't to test new and distinct development stuff and to have a little preview of what we could achieve with a newer source from XiaoMi, PLEASE KINDLY REVIEW BUGS SECTION.
INSTALLATION PROCEDURE
Make a TWRP backup of BOOT and DTBO partitions
Flash Quantic-Kernel_rX.zip
Reboot to system
Enjoy it
BUGS:
WiFi broken
Some people may experience that mic is not working on CALLS (only happens on dialer app)
NOT WORKING ON MIUI A11 ?
DOWNLOAD HERE: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250/releases/tag/r3.1
TELEGRAM CONTACT
https://t.me/aicplmi <-- Discussion group for support
Thanks List
To kdrag0n
To kerneltoast
To alk3p
To @TeamMex
To Dynescape
SCREENSHOTS ATTACHED BELOW
XDA:DevDB Information
Quantic Kernel, Kernel for the Redmi K30 Pro
Contributors
Ayrton990
Source Code: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250 (branch QK-eleven)
Kernel Special Features:
Version Information
Status: Alpha
Current Beta Version: r1
Beta Release Date: 2021-02-26
Created 2021-02-26
Last Updated 2021-07-19

You like my work? gift me a coffee by PayPal
Or you can simply hit the like (thanks) button to promote me on XDA Forums

Reserved 2

@ poster
Great Work, been awaiting a custom kernel to calm my itch abit, looking forward to seeing this progress, installing it on Octavi OS rn, ill check back with a review

efinityy said:
@ poster
Great Work, been awaiting a custom kernel to calm my itch abit, looking forward to seeing this progress, installing it on Octavi OS rn, ill check back with a review
Click to expand...
Click to collapse
Didn't boot on Octavi OS, Didnt have time to pull a kmesg, I'll get to it this evening

Great work, hope it will be completely finished soon. Thanks

OnT: works great on latest derpfest rom, except for wifi ofcourse. UX feels alot smoother and battery drain on standby is notably reduced.

efinityy said:
OnT: works great on latest derpfest rom, except for wifi ofcourse. UX feels alot smoother and battery drain on standby is notably reduced.
Click to expand...
Click to collapse
Thanks for feedback, mate

THREAD CLEANED
@dhaern @efinityy I read the messages and while I understand what you both were trying to say and where you guys are coming from, but please make sure that you're mindful of words you use to make sure they're not coming off as demanding, offensive, hateful, mocking.. well, you get the drift. I implore you both to re-read Rule 2 of the Forum Rules.
This is just a friendly reminder to keep it civil, on-topic and refrain from putting fuel to fire by responding to posts that you think don't belong in the thread. Just report if you feel something isn't right and let us take care of it for you, so that we can make your experience on the forum better.
Now let's all take a deep breath, and get back on topic, shall we? Thanks guys!
Regards,
shadowstep
Forum Moderator

realy want to try this kernel but will be wifi fixed soon?

Thanks fot your effort dev.
You are only one who keep developing kernel for poco f2 pro
I have request I don't if it could be done or not
Many users complain green tint and black crush display and I figured out it may be something to be edited in display refresh rate and total pixels (like CRC app for overclocking refresh rate for windows)
when aggressive refresh rate is done or excess of total pixels added the screen turns to defects like tints and color crush
So if you can decrease total pixels untill reached it is minimum limit it will solve these defects for poco f2 pro displays

magaedy said:
Thanks fot your effort dev.
You are only one who keep developing kernel for poco f2 pro
I have request I don't if it could be done or not
Many users complain green tint and black crush display and I figured out it may be something to be edited in display refresh rate and total pixels (like CRC app for overclocking refresh rate for windows)
when aggressive refresh rate is done or excess of total pixels added the screen turns to defects like tints and color crush
So if you can decrease total pixels untill reached it is minimum limit it will solve these defects for poco f2 pro displays
Click to expand...
Click to collapse
This sounds interesting, as this is an issue i have alot, especially with DC dim turned on, spotify for example has a green hue from top to bottom, fading the further down you go
EDIT; upon looking through the commits i can see some fiddling is done with the screen, hopes are high

efinityy said:
This sounds interesting, as this is an issue i have alot, especially with DC dim turned on, spotify for example has a green hue from top to bottom, fading the further down you go
EDIT; upon looking through the commits i can see some fiddling is done with the screen, hopes are high
Click to expand...
Click to collapse
Where this fiddling is done and by whom ?

magaedy said:
Where this fiddling is done and by whom ?
Click to expand...
Click to collapse
in the OPs source github link.

efinityy said:
in the OPs source github link.
Click to expand...
Click to collapse
guide us, master, and show directly path for our dream

Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
CAFest Kernel for Xiaomi-SM8250 based on LA.UM.9.12.r1-08000-SMxx50.0 Tag - Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
github.com
there you go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

efinityy said:
Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
CAFest Kernel for Xiaomi-SM8250 based on LA.UM.9.12.r1-08000-SMxx50.0 Tag - Commits · Official-Ayrton990/android_kernel_xiaomi_sm8250
github.com
there you go
View attachment 5251009
Click to expand...
Click to collapse
and with uat help?

New Quantic Kernel Update is out with bugfixes:
Changelog
- Fixed broken WiFi
- Fixed mic on audio calls
- Upstreamed LTS to 4.19.188 (Learn why is important to merge LTS to Linux Kernel: https://source.android.com/devices/architecture/kernel/releases?hl=en#long-term-stable-kernels)
- Upstreamed CAF Tag to: LA.UM.9.12.r1-11000-SMxx50.0
- Latency improvements on UI
- f2fs substantial speed improvements
- Support for TTL data fixation
- Added FOD command fixation on dtbo. FOD now should be reliable than before.
- WALT Scheduler tweaked to reduce latency through tasks
- Affine touchscreen IRQs to the prime CPU cluster
- Optimize interrupt dispatcher by assigning pm_qos as low latency and to avoid cpu idle on interrupts requests.
- Set BBR as default algorithm for TCP Congestion
- Drop some non-eficient and unused defconfigs
- Fix some dynamic allocations
- Swtiched to SLMK to avoid apps closing from the background
- Fix battery drain present when locking device with LTE only enabled by fixing an unbounded workqueue
- Use LZ4 algorithm for ZRAM and set by default 2GB instead of 3GB
- Fix a Important race condition on DRM to avoid security exploits
- Disabled AUDIT as selinux is no more dependent of it.
- Using SD865+ GPU Max frequency
- Reduced logs to the minimum to reduce performance overhead
- Imrpoved UFS performance by optimizing current driver and scrapping out XiaoMi's jank code.
Download here: https://github.com/Official-Ayrton990/android_kernel_xiaomi_sm8250/releases/tag/r1
Donate here: paypal.me/ayrton990
Telegram group for support: t.me/aicp_lmi
Regards, Ayrton!

Doesn't work with hentai os. Doesn't boot.

wifi work now? sombody on shapeshift 2.4 ? work?

Related

[PIE][Kernel][28.11.2020][4.9.246] Kirisakura_NEXT 1.2.0 for HTC U12+ aka Imagine

Kirisakura-Kernel for HTC U12+
Hello everyone,
Kirisakura kernel is designed to bring a handful of beneficial features to the device, while ensuring excellent performance and smoothness to get you safely through the day!
This includes upstreaming to latest linux stable for enhanced security and stability. As well as bringing in important new CAF patches, as soon as CAF releases the sources for the SD 845!
Revisiting the stock EAS implementation for further efficiency enhancements is also on my current roadmap for future development. I´m sure there is potential!
To have a read about our scheduler, which is called EAS, take a look here:
https://developer.arm.com/open-source/energy-aware-scheduling
Main Features:
- Based on latest kernel sources from HTC for the HTC U12+ (2.45)
- Upstreamed to latest 4.9.246
- CAF-Upstream merged
- Pixel 3/XL EAS ported over
- Cleanslate features from @tbalden included! (big thanks to him!)
CPU related features:
- Dynamic schedtune boost from @joshous
- CPU Input boost from @Sultanxda
- Disclaimer: please take a look at post 2 on how to set them up!
- Power saving workingqueues enabled by default (toogleable in EXKM)
have a read here: https://lwn.net/Articles/731052/
this complements EAS in general
- DDR bandwidth boost from @Sultanxda
Graphic related features:
- KCAL to control the display
- Adreno Boost
- Enabled NAP power saving state of Adreno 630
Network related features:
- Wireguard Support
Misc Features:
IO-Schedulers:
- cfq
- bfq
- maple
- deadline
- noop
- tripndroid
- fiops
- zen
TCP Congestion Algorithms:
- advanced algorithms enabled
- includes new bbr and sociopath tcps
Wakelock Blocker:
- advanced wakelock blocker with the ability to block any wakelocks (dangerous, use with caution)
- common wakelocks that are safe to be blocked are blocked by default
Feature section for the "non visible" but perceptible improvements:
- mark certain IRQ and kthreads as performance critical
- updated schedutil governor
- updated binder section (responsible for interprocess communication)
- updated sdcardfs (have a read about it here: https://www.xda-developers.com/divi...les-fuse-replacement-will-reduce-io-overhead/ )
- Speculative Page Faults (1. 2)
- Memory allocation overflow protection (kernel hardening feature)
- proc gate vulnerability fixed
Requirements
- unlocked Bootloader
- USB-Debugging in developer options enabled
- latest adb and fastboot binaries
- working adb and fastboot environment
How to flash the Kernel:
1. Download the kernel.zip to your device
2. Reboot to TWRP
3. Flash the kernel.zip in TWRP
4. The kernel zip will detect if you´re rooted and keep root in that case!
5. Reboot and Profit
IMPORTANT NOTICES
1. After rooting, the option to enable face unlock from htc may be greyed out.
How to fix:
a. Open Magisk Manager
b. Open the side menu and tap on magisk hide
c. Tick faceunlock to be hidden
DOWNLOAD:
Download is located always in this folder:
https://www.androidfilehost.com/?w=files&flid=278195
Important: Read after Download
Please take a look at the second post after flashing the kernel!
Changelog:
0.1 Initial Release
0.2 https://forum.xda-developers.com/showpost.php?p=77002100&postcount=32
0.5 https://forum.xda-developers.com/showpost.php?p=77092842&postcount=46
1.0 https://forum.xda-developers.com/showpost.php?p=77131607&postcount=61
1.1 https://forum.xda-developers.com/showpost.php?p=77187557&postcount=82
1.3 https://forum.xda-developers.com/showpost.php?p=77228675&postcount=85
1.4 https://forum.xda-developers.com/showpost.php?p=77234128&postcount=88
1.7 https://forum.xda-developers.com/showpost.php?p=77255692&postcount=90
2.0.3 https://forum.xda-developers.com/showpost.php?p=77515446&postcount=115
2.1.1 https://forum.xda-developers.com/showpost.php?p=77585106&postcount=136
2.2.0 https://forum.xda-developers.com/showpost.php?p=77663581&postcount=167
2.2.3 https://forum.xda-developers.com/showpost.php?p=77757758&postcount=181
2.3.4 https://forum.xda-developers.com/showpost.php?p=77856442&postcount=195
3.0.2 https://forum.xda-developers.com/showpost.php?p=78204561&postcount=244
4.1.1 https://forum.xda-developers.com/showpost.php?p=78315932&postcount=261
5.0.0 https://forum.xda-developers.com/showpost.php?p=78767277&postcount=301
5.2.1 https://forum.xda-developers.com/showpost.php?p=78856374&postcount=321
7.0.0 https://forum.xda-developers.com/showpost.php?p=79353529&postcount=337
9.1.0 https://forum.xda-developers.com/showpost.php?p=79696218&postcount=355
10.0.0/1 https://forum.xda-developers.com/showpost.php?p=79973617&postcount=364
Pie and forward (please not this release is a hacked base OREO-base to work on Android Pie):
10.7.0 https://forum.xda-developers.com/showpost.php?p=81035393&postcount=378
Pie:
1.2.0_NEXT https://forum.xda-developers.com/showpost.php?p=84014357&postcount=388
Donations:
Donations are not mandatory but very welcome if you want to support development or just buy me a coffee
If you like my work: http://paypal.me/freak07
Credits:
@osm0sis for all his work, including the ak2 installer!
@tbalden for being the best HTC wingman!
@LeeDroid for his awesome roms!
@Captain_Throwback for all the mentoring and guidance!
@Eliminater74 for bringing me into the game and the Inspiration
@nathanchance for his upstream guidance and assistance
@RenderBroken for helping me out
@flar2 for all his work
@joshuous for all the help he provided to me
XDA:DevDB Information
Kirisakura-Kernel , Kernel for the HTC U12+
Contributors
Freak07
Source Code: https://github.com/freak07/Kirisakura_Imagine/commits/master_bluecross_eas
Kernel Special Features: Linux Upstream, KCAL, CAF, Cleanslate Features, Pixel 3 EAS
Version Information
Status: Stable
Created 2018-06-28
Last Updated 2020-11-28
How to set up the kernel
as with release 4.1.1 it’s advised to change no boost settings at all! It’s all flash and forget
This is a short guide on how to set up the kernel. This is currently required because TWRP is not yet ready and therefore I have no ak2 zip to set that all up.
The following is deprecated as with 0.5 Release!
Basically I decided to disable pnpmgr. This is htc’s daemon for controlling the CPU boosts.
I integrated a few other boosts to the kernel that work way better to replace HTC´s mechanism.
The phone is more smooth and more efficient now.
This is not a requirement at all. It´s entirely optional in case you aren´t satisfied with the current state of things!
1. With a root explorer go to /system/vendor/etc and rename pnp.xml to pnp.xml.bak
That will disable pnpmgr on the next reboot.
2. In EXKM navigate to CPU -> Boost Settings
3. Set the values like on the attached screenshot! and toogle the arrows to set it on reboot
4. cpu input boost currently has no interface in EXKM. The predefined values are fine. But if you navigate to Tools -> User Settings, you can call any file and change the values exactly to your liking.
Just hit the + and add the following paths:
sys/module/cpu_input_boost/parameters/input_boost_freq_lp boost freq of the little cluster
sys/module/cpu_input_boost/parameters/input_boost_freq_hp boost freq of the big cluster
sys/module/cpu_input_boost/parameters/input_boost_duration boost freq duration
5. Reboot and profit
The following is advised as with the Release of 0.5!
1. If you previously renamed pnp.xml found in /system/vendor/etc, to pnp.xml.bak, rename it back to pnp.xml!
Now reboot!
2. Here is a screenshot of the optional boost settings I´m currently running. These are a bit more aggressive than stock, provide more smoothness but cost a tiny bit of battery. In the end I still achieve way better battery results on 0.5 than on 0.2 even with additional boosts enabled. That is due to the energy saving commits I mentioned in the changelog of 0.5.
Here is the screenshot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
also mine
and mine
woo-hooo!
Thank's so much for you work mate....wich app could use to get advanced color control ??...is there able to get more bright on the screen ? because this is dim as u11+, i can't see any difference in brightness...very frustrating
neofrost37 said:
Thank's so much for you work mate....wich app could use to get advanced color control ??...is there able to get more bright on the screen ? because this is dim as u11+, i can't see any difference in brightness...very frustrating
Click to expand...
Click to collapse
You can control kcal with exkm app.
But you can just control srg, saturation, contrast etc.
With Kcal nothing can be done about the brightness. Sorry for that!
I forgot to add Wireguard as a supported feature. I corrected this in the OP.
neofrost37 said:
Thank's so much for you work mate....wich app could use to get advanced color control ??...is there able to get more bright on the screen ? because this is dim as u11+, i can't see any difference in brightness...very frustrating
Click to expand...
Click to collapse
There is absolutely nothing wrong with the brightest on this phone. Slightly dimmer than U11. Currently have auto brightness off and set just under half way. In the sun it visible at 3/4 brightness.
schmeggy929 said:
There is absolutely nothing wrong with the brightest on this phone. Slightly dimmer than U11. Currently have auto brightness off and set just under half way. In the sun it visible at 3/4 brightness.
Click to expand...
Click to collapse
so would you post a picture to compare both phone's with max bright ??....mine is just a little bit more bright than u11+ , maybe i just have bad luck with my 2 last htc's
neofrost37 said:
so would you post a picture to compare both phone's with max bright ??....mine is just a little bit more bright than u11+ , maybe i just have bad luck with my 2 last htc's
Click to expand...
Click to collapse
Just did a side by side pic and to me the U12+ seems brighter probably due ether cooler color.
schmeggy929 said:
Just did a side by side pic and to me the U12+ seems brighter probably due ether cooler color.
Click to expand...
Click to collapse
Thank's mate, but left side phone's not seems htc, because u12+ dont have rounded corners i the screen !
neofrost37 said:
Thank's mate, but left side phone's not seems htc, because u12+ dont have rounded corners i the screen !
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.leedroid.shortcutter&hl=en there's an easy overlay setting by @LeeDroid
tbalden said:
https://play.google.com/store/apps/details?id=com.leedroid.shortcutter&hl=en there's an easy overlay setting by @LeeDroid
Click to expand...
Click to collapse
wow, didn't know it !, you make my day , great app....sad with my display bright, awesome device i ever had....just hope update with a 20% more bright ..thank's everyone for answer
neofrost37 said:
wow, didn't know it !, you make my day , great app....sad with my display bright, awesome device i ever had....just hope update with a 20% more bright ..thank's everyone for answer
Click to expand...
Click to collapse
Did you turn off auto brightness and tried full manual brightness? For me it is absolutely fine, even with auto
Sent from my HTC U12+ using XDA Labs
DeeZZ_NuuZZ said:
Did you turn off auto brightness and tried full manual brightness? For me it is absolutely fine, even with auto
Sent from my HTC U12+ using XDA Labs
Click to expand...
Click to collapse
I'll try mate, thank's
neofrost37 said:
Thank's mate, but left side phone's not seems htc, because u12+ dont have rounded corners i the screen !
Click to expand...
Click to collapse
Leedroid's shortcutter App (Rounded Corners)
Whoot-whoot. Great job mate.
Sent from my HTC U12+ using XDA Labs
neofrost37 said:
I'll try mate, thank's
Click to expand...
Click to collapse
Nothing mate, it's really dim even a cloudy day
neofrost37 said:
Nothing mate, it's really dim even a cloudy day
Click to expand...
Click to collapse
No problems here. Yesterday I was looking at the phone in the sun and had no problems
Sent from my HTC U12+ using XDA Labs

[KERNEL][CLANG 8.0][3.18.x] KingKernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the home of KingKernel development for sailfish/marlin
Created by: @kingbri and @Sweetie​
Our philosophy: The idea is to create a kernel that is packed with features, but doesn't compromise stability or battery life.
This kernel is compiled with the latest, bleeding edge Clang 9.x
Features:
- Based on EAS v3.5
- Has 4.4 ports from mm, RCU, zram, etc...
- Cpufreq: chill, updated schedutil, blu_schedutil, bioshock, conservativex to name a few
- Adrenoboost and @Sultanxda's cpu_input_boost driver ported to 3.18
- Dynamic SchedTune boost
- Spectrum Support
- Franco performance profiles for P
- Switches to noop I/o when screen is locked
- CFQ default, maple I/o sched included
- exFAT fs support
- f2fs support
- OC gpu to 710 Mhz
- TCP westwood: default
- High brightness mode and Backlight dimmer included
- Vibration control
- Boeffla WL blocker with wakelocks blocked
- Audio High perf mode enabled by default
- Sound control
- And so.... so much more
Update Schedule:
Always upstreamed to latest sources
Always updated to latest patches
Will notify about updates in changelog
How to flash:
Non-root:
Flash as normal in TWRP
KingKernel features what I call "boot tweaks" that activate themselves on every boot and change some values. These are composed of the small stuff such as setting default gov values and miscellaneous tweaks. ​
Root (Use any autoflasher, I reccomend FrancoKernel manager since it can flash anything):
[*]Make sure you're rooted first
[*]Either flash through TWRP or your favorite autoflasher (FKM)
[*]Reboot and you should be good!
My policy on flaming/rude commentary:
Flaming - posting of a provocative or offensive message to provoke an angry response:
I WILL NOT condone these posts in any way, shape, or form. If you are flaming me or anyone else, you will be reported and private messaged saying that you have been flaming and you need to stop. If you have an issue with the kernel, please reply here for stable and the TG chat for betas
However, Off Topic comments are encouraged!
KingKernel beta builds- I know that you have heard of beta builds before, so here are the instructions to download and reach me for reporting bugs​
[*]Downloads located here: [url]https://github.com/King-Kernel/beta-builds[/URL]
[*]MAKE SURE TO READ THE README inside the GitHub page
[*]I will not answer bugs in this thread, please reference the telegram group section for me to answer
Mod Edit: Link Removed
Downloads (Stable): [url]https://github.com/King-Kernel/stable-builds[/URL]​
Source code: [url]https://github.com/King-Kernel/KingKernel-marlin[/URL]​
Current Version v4.2
Linux - 3.18.134
Security - Feb. 2019
Feature changes:
-Changeup some boost values
-Purge blackenedmod
-Add in boot tweaks
-Use pigz for zipping
-Add skip_override
-more stuff...
Since my build environment can change frequently, I'm going to post the current environment here (hardware stays the same):
mid-2012 MBP with 16GB of ram and core i5 processor
Building on a 256GB external SSD running Solus Budgie
Custom rom stuff to remove:
BenzoRom: remove /system/etc/init/benzorom-io.rc (interferes with setting default io sched to cfq on kernel)
PixelDust: its init.rc sets multiple default values that interfere with the kernel settings, however the boot tweaks should counteract these actions pushed by the ROM
Magisk Modules:
None.
My position on kernel modding:
I'm fine if you mod your phone in any way, shape, or form. Based on some testers, people have been saying that the kernel works better by itself without using any mods. The init.rc only sets some defaults and cosmetic values. If you are planning on using a kernel mod, just know that I DON'T support them. I'll try to fix your issue of course, but it's not guaranteed that your issue will be fixed, please contact the mod dev to fix the issue
Pixel and Pixel XL users!
I'll be making a new branch (the really unstable one)
Which will have a lot of new features, also it'll be quite unstable.
We will filter those features slowly in the stable branch.
If you guys need any new feature! Then reply to this or PM me (with commit link or the thread where you saw that) I'll try my best to add that.
Booted and smooth so far on lineage PIE. Elementary OS is a beautiful distribution, I ran it for a minute before switching to deepin.
Also, any info on the bluschedutil governor? I usually run sched or schedutil because of the whole eas thing. But I seen it and haven't been able to search anything. Currently running it
noidea24 said:
Booted and smooth so far on lineage PIE. Elementary OS is a beautiful distribution, I ran it for a minute before switching to deepin.
Also, any info on the bluschedutil governor? I usually run sched or schedutil because of the whole eas thing. But I seen it and haven't been able to search anything. Currently running it
Click to expand...
Click to collapse
It's in the Blu spark kernel for op6 and is just schedutil with multiple mods
[do replies really require a title? I am losing my original thought to reply..]
Downloading and testing. I am still fairly new to android development but not computers in general. I have compiled a kernel.
Would you mind posting your workflow from git to make? Possibly your bash history so I and others can have proper command syntax / reference?
I have a Dell PowerEdge R710 with dual Intel Xeon X5550's + 80+GB memory and a bunch of 300GB 15.3k SAS drives running Debian Jessie.
Its a older server but it took only 40 minutes to build Carbon Rom. I could assist with build from time to time if your laptop fans ever require a break. ;hj
(I also have same model, think it was the first generation Intel built MBP. It can't run anything past Snow Leopard or Lion but it runs Windows 10 really well; as alternative method to syncing a iPhone as new versions of iTunes require macOS that my MBP cannot upgrade to.)
Thank you for your contributions to the internet.
Be well.
@kingbri
What is up with this commit? Why would you have to pick a fix of someone else's bad pick?
github.com/King-Kernel/KingKernel-marlin/commit/6142c211378ffc1d282a35c1d25e41992c500f89
Also, this commit doesn't have any authorship. Is this your 100% original code?
github.com/King-Kernel/KingKernel-marlin/commit/04cb51eb014e86d25c550e82df6f66bcca1c886a
Thanks in advance. I would love to run this kernel after getting a satisfactory response.
fight_the_kang said:
What is up with this commit? Why would you have to pick a fix of someone else's bad pick?
github.com/King-Kernel/KingKernel-marlin/commit/6142c211378ffc1d282a35c1d25e41992c500f89
Click to expand...
Click to collapse
He didn't pick that, that commit doesn't exist in nine7nines kernel at all. He committed as nine7nine (something he keeps doing). That commit is 100% kingbri's, yet he is giving nine7nine the authorship and making nine7nine look like a fool.
@kingbri: fix it.
This is something that has been bugging me since the original conversation back with nine7nine. Fix it.
I've been in contact with github over this. I'm also trying to get in contact with nine as well to make a dmca claim.
What you are doing is in violation of the gpl.
So I sat in his telegram and decided to see what he has been saying. So first off he denied he'd ever heard of it, you can scroll down on this forum and see the original King-Kernel thread I'll leave a screenshot attachment, let's call it exhibit a.).
Then he warned the person and said only talk about this in private. Exhibit b.)
And just for archival sake. Exhibit c.) the actual dev letting him know about this MONTH'S ago.
Edit: I'd love a response that isn't full of it, or even better a full apology and fix.
AllusionPDX said:
So I sat in his telegram and decided to see what he has been saying. So first off he denied he'd ever heard of it, you can scroll down on this forum and see the original King-Kernel thread I'll leave a screenshot attachment, let's call it exhibit a.).
Then he warned the person and said only talk about this in private. Exhibit b.)
And just for archival sake. Exhibit c.) the actual dev letting him know about this MONTH'S ago.
Edit: I'd love a response that isn't full of it, or even better a full apology and fix.
Click to expand...
Click to collapse
I just got banned from his chat for trying to have the type of discussion that needs to happen to address the issue. This thread should be closed at this point
Firstly, I would like to say that I'm sorry that I didn't address the git issues when they came up 3 months ago, it was a tough place for me and I had to take a hiatus. However, this situation wasn't dealt with properly. I said that I'll fix the issues, but these people kept berating me with insults and didn't listen that i'm fixing the issues. So, I am fixing them as I post this, but the issues need to be discussed in a calm and formal matter and not just straight up insulting me. This is the end of this discussion
kingbri said:
Firstly, I would like to say that I'm sorry that I didn't address the git issues when they came up 3 months ago, it was a tough place for me and I had to take a hiatus. However, this situation wasn't dealt with properly. I said that I'll fix the issues, but these people kept berating me with insults and didn't listen that i'm fixing the issues. So, I am fixing them as I post this, but the issues need to be discussed in a calm and formal matter and not just straight up insulting me. This is the end of this discussion
Click to expand...
Click to collapse
1) no one is insulting you. No one in this thread has said anything to you that could be considered an insult. If anything, you are insulting us by banning us from your telegram group to avoid fixing the problem
2) you are the one who has not handled the situation properly. It takes a fraction of a day to fix a commit yet this whole drama has been going on for months and you have been too stubborn to just fix it. Again, banning people and ignoring the problem is not the way to deal with it
Sent from my Pixel 2 XL using Tapatalk
slothdabski said:
1) no one is insulting you. No one in this thread has said anything to you that could be considered an insult. If anything, you are insulting us by banning us from your telegram group to avoid fixing the problem
2) you are the one who has not handled the situation properly. It takes a fraction of a day to fix a commit yet this whole drama has been going on for months and you have been too stubborn to just fix it. Again, banning people and ignoring the problem is not the way to deal with it
Click to expand...
Click to collapse
It's a start. He did apologize. Hopefully he will learn.
https://github.com/King-Kernel/KingKernel-marlin/issues/1
Commits fixed. the branches KingKernel and KingKernel-oct-stable now have the fixed authorship of the commits. If the commits show up in the search bar, it's from the branches that are NOT the ones listed above
@slothdabski and @shagbag913, i'm gonna unban you guys from the TG chat
kingbri said:
Commits fixed. the branches KingKernel and KingKernel-oct-stable now have the fixed authorship of the commits. If the commits show up in the search bar, it's from the branches that are NOT the ones listed above
@slothdabski and @shagbag913, i'm gonna unban you guys from the TG chat
Click to expand...
Click to collapse
Thank you, appreciate it [emoji106]
Sent from my Pixel 2 XL using Tapatalk

[ROM][UNOFFICIAL][9.0_r21] MoKee OpenSource Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
What's working :
Everything
Known issues:
you tell me...
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash pie vendor and firmware
Flash the latest build and GApps
Reboot
Downloads :
MoKee Download for Poco F1
MoKee Add-Ons:
MoKee Extras​
Credits:
abhishek987
Mokee Development Team
LineageOS
MoKee video
https://youtu.be/EoBvH6mfhPo
XDA:DevDB Information
MoKee OpenSource Project, ROM for the Xiaomi Poco F1
Contributors
ronks888
Source Code: https://github.com/MoKee
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: TWRP, Unlocked bootloader
Based On: Mokee Open Source Project
Version Information
Status: Stable
Stable Release Date: 2018-12-12
Created 2018-12-12
Last Updated 2018-12-12
ChangeLog:
- Initial Build
2018/12/13
- update kernel to 4.9.144
- hide notch (developer options)
- change default display density to 440dpi
- Enable ViLTE
- Enable 18:9 aspect ratio
- added APN
- Others specials improvements and features
2018/12/17
- update kernel to 4.9.145
- enable boots frameworks
- enable Call Record
- Snapdragon Camera
- MIUI Video
- Others specials improvements and features
Hope you'll E N J O Y !!!
New ROM! Shall give it a try and report back! Thanks for your hard work
alright! another one!
Used Mokee on Mi A1. It was pretty good. Almost identical to LOS
Nice compilation ! I really like the way the notch handling is done. Still way to go to test it further but the early feel is awesome.
Does it have pie gesture control like in resurrection remix or msm-extended?
Dna10 said:
Does it have pie gesture control like in resurrection remix or msm-extended?
Click to expand...
Click to collapse
Nope ! It just has the basic AOSP Swipe up on Home button gesture.
@ronks888 Just flashed the ROM. In love with it :highfive: Thank you for building. I guess this is going to be my daily driver for a while. Please continue to provide updates and also wish it becomes official soon.
P.S. Jio network doesn't have APN on the first boot and had to add manually (just letting it know here in case someone is flashing)
Thanks for Sharing
Michael Anish said:
@ronks888 Just flashed the ROM. In love with it :highfive: Thank you for building. I guess this is going to be my daily driver for a while. Please continue to provide updates and also wish it becomes official soon.
P.S. Jio network doesn't have APN on the first boot and had to add manually (just letting it know here in case someone is flashing)
Click to expand...
Click to collapse
Hi, can you please let me know a few of things since you are already on this ROM.
1. SeLinux policy (Permissive or Enforcing).
2. Battery life.
3. Navbar vibration intensity (whether too high like LOS).
4. Status bar notification compatibility (whether dot or i on gets out of the notch line).
5. Any random reboots (mostly when device is in idle).
6. Any performance issue such as occasional lag or freeze (mainly when performing heavy task or gaming).
7. Auto brightness (whether stable or fluctuates too much).
8. Whether ctsPtofile gets passed on Magisk or need additional magisk module for that.
9. Last but not the least, how is the touch response (I'm sure you know what I am talking about).
Thank you for taking your time to read and answer.
Rowdyy Ronnie said:
Hi, can you please let me know a few of things since you are already on this ROM.
1. SeLinux policy (Permissive or Enforcing).
2. Battery life.
3. Navbar vibration intensity (whether too high like LOS).
4. Status bar notification compatibility (whether dot or i on gets out of the notch line).
5. Any random reboots (mostly when device is in idle).
6. Any performance issue such as occasional lag or freeze (mainly when performing heavy task or gaming).
7. Auto brightness (whether stable or fluctuates too much).
8. Whether ctsPtofile gets passed on Magisk or need additional magisk module for that.
9. Last but not the least, how is the touch response (I'm sure you know what I am talking about).
Thank you for taking your time to read and answer.
Click to expand...
Click to collapse
1. Actually I can't find SELinux policy (yeah it's very strange for me)
2. Battery life is very good. Probably due to the Mokee kernel
3. Vibration is perfect. I'd say medium intense comparing to those high intensity and low intensity in other ROMs
4. Notifications get a dot on both the sides
(However there still needs to be customisation of battery style and usage of 4G instead of LTE - @ronks888)
5. No random freezes or reboots at all. (I know how it is because I had been testing ROMs and I had random reboot in AOSiP and random freezes in test build of official Citrus CAF)
6. No performance issue at all. I'm not a gamer so I can't comment on the gaming performance at all. But all apps load quick and fast and switching b/w recents was smooth
7. Auto brightness is very stable
8. CtsProfile will never get passed on Magisk V18 . Check the below tweet quote
https://twitter.com/topjohnwu/status/1072812881232715776?s=19
9. I am on the latest vendor 8.12.10 and it's all fine for me. (8.12.7 was buggy and I literally went back to 8.11.15 )
Overall , there's couple of UI only work that needs to be done like battery style and 4G icon. It's all those status bar options.
Rest everything is very nice. I'm finally sticking to this ROM for quite sometime
@ronks888 The status bar icons (battery,wifi etc) on the lockscreen need to aligned like the Home screen status bar icons. The lockscreen status bar icons appear to be pushed too much towards the edge. Rest so far so good. The rom is serving me excellent battery life with no UI lags and is very lightweight and brisk to use.
Michael Anish said:
1. Actually I can't find SELinux policy (yeah it's very strange for me)
2. Battery life is very good. Probably due to the Mokee kernel
3. Vibration is perfect. I'd say medium intense comparing to those high intensity and low intensity in other ROMs
4. Notifications get a dot on both the sides
(However there still needs to be customisation of battery style and usage of 4G instead of LTE - @ronks888)
5. No random freezes or reboots at all. (I know how it is because I had been testing ROMs and I had random reboot in AOSiP and random freezes in test build of official Citrus CAF)
6. No performance issue at all. I'm not a gamer so I can't comment on the gaming performance at all. But all apps load quick and fast and switching b/w recents was smooth
7. Auto brightness is very stable
8. CtsProfile will never get passed on Magisk V18 . Check the below tweet quote
https://twitter.com/topjohnwu/status/1072812881232715776?s=19
9. I am on the latest vendor 8.12.10 and it's all fine for me. (8.12.7 was buggy and I literally went back to 8.11.15 )
Overall , there's couple of UI only work that needs to be done like battery style and 4G icon. It's all those status bar options.
Rest everything is very nice. I'm finally sticking to this ROM for quite sometime
Click to expand...
Click to collapse
Strange! I'm on NOS (it's still in BETA) with Magisk 18.0 and ctsProfile passes without needing to flash any magisk module.
Anyway, I will try Mokee tomorrow along with miui stable pie (stock & EU) and let see which one suits my taste.
This rom has framework boost implemented?
MoKee video
https://youtu.be/EoBvH6mfhPo
Update MoKee OpenSource
ChangeLog 2018/12/13
- update kernel to 4.9.144
- hide notch (developer options)
- change default display density to 440dpi
- Enable ViLTE
- Enable 18:9 aspect ratio
- added APN
- Others specials improvements and features
Hope you'll E N J O Y !!!
@ronks888 Thank you for the update. The new build is now aesthetically very nice with the new DPI values. Especially notch.. My only request is to add battery styles. Otherwise I'm satisfied and using it now . More snappier now.
someone please test.. is screen saver gear icon still giving force closes
Mohan0004 said:
someone please test.. is screen saver gear icon still giving force closes
Click to expand...
Click to collapse
Not for me here

[ROM][10.0][OFFICIAL] ArrowOS 10.0 STABLE [VoLTE][WEEKLY][A6020][DISCONTINUED]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS​
ABOUT
ArrowOS is an AOSP based open source project started with the aim of keeping things simple, clean and neat, both for the Android system and users. We understand the pain of unnecessary and sometimes rarely used mods/features being shipped with custom roms nowadays which may end up causing battery drains and/or memory leaks & crashes. This is being strictly avoided on our side keeping everything to a bare minimum, delivering stable performance all the time without destroying the AOSP interface. With users getting more used to tweaks and features, we added just the right features and customisations that will be actually USEFUL at the end of the day.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Click here (read more on our website)
Checkout more documentation at (maintainership/contributing): Click here
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
OTA Updater app
You tell me
Be sure to include a log: check how to
Additional Features:
Dirac™ audio enhancer
DT2W support
SafetyNet passing (magisk)
VoLTE in both slots (one at a time)
WiFi display (Miracast)
Includes QuicksilveR kernel with features such as:
- power efficient workqueues
- upstreamed binder driver
- adreno idler
- optimized interactive governor
- optimized HMP scheduler
- unlocked 1.65GHz big cluster cpu freq in sd616 variants
- dynamic refresh rate and ULPS mode for display power savings
- westwood TCP congestion control
- tuned cfq i/o scheduler
- KSM and UKSM for better ram management
- USB fast charge
- KCAL colour control
- wakelock blocker
- mild CPU undervolt
- BT power management
- core_control hotplugging
- compiler optimizations for msm8916/a53
- etc.
SCREENSHOTS
https://imgur.com/a/zEfEmFn
DOWNLOADS
ROM: Click Here for ROM
There are 2 versions available for each build, GApps and vanilla version. GApps version includes minimal GApps - Google Play Services, Play Store and Setup Wizard built into the ROM, while vanilla version does not include GApps. For more information, click here.
GApps for vanilla version: BiTGApps | FlameGapps
Magisk (for root): https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445/
SOURCES
ROM Source: https://github.com/ArrowOS
Kernel source: https://github.com/ArrowOS-Devices/android_kernel_lenovo_msm8916/
Device sources: https://github.com/ArrowOS-Devices
Changelogs
Code:
[B]20191207:[/B]
- Initial stable build
[B]Next 2 months:[/B]
- Only ROM source changes
[B]20200229:[/B]
- unlocked 1.65GHz big cluster cpu freq in sd616
- improved responsiveness and reduced jank
- overall ui should be smoother now
- now big cluster cores turn on more often
- updated kernel, fixed some dmesg spam
- added ksm and uksm for better ram management
- enabled ro.config.lowram prop in 2gb variants
- attempted to fix high mic gain in volte (HD) calls
[B]20200323:[/B]
- fixed network breakage after exiting airplane mode
- fixed random reboots in sd 415 variants
- enabled hw keys customization and proximity check on wake
- switched to new pixel offline charging animation
- used postboot script from caf
- added well tested vsync offsets
- enabled gl backpressure
- switched to userspace lmkd
- rom should be way smoother now
[B]20200330:[/B]
- fully fixed wifi and bt mac address
- attempted to fix data corruption on unexpected shutdown
- fixed power off alarm (in built-in clock app only)
- enabled 1gb zram for better multitasking
- added ambient display
- android go can be disabled by editing build.prop now
- added cpusets for better process management
- updated sound effects, media, omx and time services blobs
- updated drm, qsee and graphics (adreno) blobs
- lot of code updates in the kernel
- misc ux improvements
[B]20200415:[/B]
- fixed encryption/decryption
- enabled ulps mode for all panels
- enabled dynamic refresh rate (48 to 60Hz) for more power savings
- unlocked 1.1GHz in sd415 little cluster
- gps is now more accurate and locks much faster
- upgraded camera blobs from stock 6.0
- much better hdr, autofocus, image/video quality and processing
- disabled android go fully (no need of flashing disabler)
- fixed random wifi speed drops
- improved in-call audio and mic volume
- updated audio/adsp blobs to 10.0
- added display post processing blobs with CABL
- misc performance and ux improvements
- Merged AOSP r33 tag
- Lawnchair is now the default launcher
- notch-city is back - Immersive, hide notch etc features for supported devices
- Add FaceUnlock feature
- Add Navigation bar toggle for HWkey devices
- Upstream changes and fixes
- Translations merged from community
FAQs
Q: VoLTE icon is missing! How can I enable it?
A: Settings -> Display -> Statusbar icons -> Enable VoLTE icon
Q: No dark mode in Phone and SMS apps!
A: Either install Google Dialer and Messaging from the Play Store, or enable "Override force-dark" in Developer settings
Q: Where is Dirac audio enhancer and how can I enable it?
A: Go to Settings -> Sound -> scroll to the bottom
Q: 2 Big cluster CPUs are always offline! Not able to turn them on!
A: When CPU load is low, these cores are turned off to save power. They will turn on automatically when CPU load increases. If you still want to turn on cpus disable core control in EX Kernel manager or a similar app.
Q: HELP! everything was fine until today but suddenly my screen stopped responding to touch and I had to reboot!
A: It turns out that k5/plus units with certain display panels have some issues with DT2W (double tap-to-wake) enabled. You can go ahead and disable it in display settings, the issue should disappear after that.
How to download this ROM?
I keep failing
Hi adityhya rom I use the way you say performance has increased really good rom now I wish you more success and new privatization plenty of roms waiting for you to meet us
I used this rom for a short time (I'm still used) It is very stable at the same time and curious item, the front speaker played ringing sound (too useful because my rear speaker is rusty)
Launchair bug does not open after reboot
And the battery consumption is very high, consumes a lot and it takes a long time to charge.
Other than that, great rom.
V smooth so far, it's the third day i m using this rom, no issue at all, the enhanced sound is v nice feature,
The battery consumption is a bit high, even in deep sleep
Thanks so much ,Good job ??
Dev kind request can you add rotate settings for rotating screen 270* because lower half of my screen doesn't respond so i have to use it in reverse
Please help
CPU core release does not work. After performing the procedure, the cores are momentarily unlocked but after a short time lock again.
Can i update it dirty ? Or it has to be clean flash ?
Is it possible to pass safetynet with this ROM and microg?
Thanks for the rom.
How can I turn up the volume on my headphone?
And the call recording option isn't working, you can't hear what the other person says
The phone freezes randomly from time to time and it goes to lock screen where I have to enter the password to unlock the phone
How can this be fixed
What causes it ?
Cast screen restarts the phone suddenly
Im using the last update 19-1-2020
It used to work with the previous updates
Thanks for still keeping alive this outdated device !!!!!
But i am missing Dolby Atmos that bassy speakers ....
I tried installing dolby from magisk module but the rom crashed. can anyone give me link for the dolby Atmos which can suppprt this rom...... Thanks for the rom
Poor call quality reported by person on other end of the line - A6020, Q, Arrow OS
Hi,
First - When I call or someone calls me, the voice of the person on the other end is loud and clear. But the person reports that nothing of what I say is audible. There is too much of noise, or a howling voice is heard from my side. The issue normally occurs when there's HD calling b/w me and any other user (And both have Volte active).
Second - Google voice typing, WhatsApp voice messages and voice recorder does not record anything from the microphone.
Third - Pls add a tweak for mapping hardware buttons in settings.
Fourth (And of very little need from my side)- Pixel Launcher crashes with full gesture navigation activated. Up to 2 button navigation, everything is fine except that from 2 button navigation, the Google app seems to stop working, often executing after a minute from being tapped on the icon and Google assistant doesn't activate.
Encryption worked for me, many thank!
First, thanks for extending the life of this model , second I have noticed that the battery consumption during use is high, I have activated the minimum, no application that works in the background, the only thing that installed extra was the magisk
JoZ3 said:
First, thanks for extending the life of this model , second I have noticed that the battery consumption during use is high, I have activated the minimum, no application that works in the background, the only thing that installed extra was the magisk
Click to expand...
Click to collapse
download the magisk module LSpeed, set it to balanced or power save
Hello Everyone !!
I need help I bricked my phone , I was just going back to my stock rom then I am facing two problems ..
( I am not blaming this thread developer , I appreciate him for his work as I also used his ROMs )
Now my problems are :
1)-When I flashed stock rom using Qfil tool ,its showing baseband version unknown and I don't have any backup file for this ... So can I restore my baseband version.(does again flashing stock rom will fix it?)
2)-this is my main issue that my device is boot only when connected to charging. If I disconnect charger it suddenly turn off and won't turn on without charger...
And my battery is at good condition so I don't think its a battery problem.
Thanks for reading !!!
I hope anyone wil help me ...!!!
Mohit Bhatt said:
Hello Everyone !!
I need help I bricked my phone , I was just going back to my stock rom then I am facing two problems ..
( I am not blaming this thread developer , I appreciate him for his work as I also used his ROMs )
Thanks for reading !!!
I hope anyone wil help me ...!!!
Click to expand...
Click to collapse
hi there
search google for this thread on xda
[Guide] How To Fix Unknown Baseband & Unknown IMEI Issue In MTK Devices

[Kernel][ProtonClang] XDKernel | SnowCone S-1.6 for beryllium | POCO F1 [2021-11-03]

XDKernel | SnowCone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Features & Changelog:
Changes in XDKernel SnowCone S-1.6
- Merge Linux tag v4.9.289
Changes in XDKernel SnowCone S-1.5
- Merge CAF tag 'LA.UM.10.3.r1-00300-sdm845.0'
- Merge Linux tag v4.9.288
Changes in XDKernel SnowCone S-1.4
- Merge Linux tag v4.9.287
- Fix for Bluetooth error on Android S
Changes in XDKernel SnowCone S-1.2
- Implemented support for Android S
- Changes from lineage-18.1
- Upstream to latest Linux tag v4.9.286
- Upstream to latest CAF tag
- cpufreq_schedutil changes
- Many under the hood improvements (Say hello to new bugs lol)
Changes in XDKernel SMOL R-1.1
- Rebased with latest LOS changes
- Upstream to latest linux tag v4.9.269
- Update WireGuard version to 1.0.20210424
- Update touchscreen drivers from CAF (tsoft) 4.19
- Updated touchscreen configs
- Introduce UClamp and UClamp Assist
- Introduce CPUSet Assist
- Introduce GPU AdrenoBoost (disabled by default)
- Introduce USB FastCharge (enabled by default)
- Introduce Exposure Adjustment
- Introduce Support for DTS X: Eagle
- Introduce DriveDroid Support
- Introduce SimpleLMK
- Add USB HID Support
- Add FSync On/Off Toggle
- Add Tripandroid, BFQ, Anxiety IO schedulers
- Add Boeffla Wakelock Blocker V1.1.0
- Add vibration control
- Add Sound Control
- Add K-Lapse 5.0
- Add Kcal
- Add frandom
- Underclock GPU to 170mhz
- Affine hwcomposer to big CPUs
- Disabled Gentle Fair Sleepers
- Enable kernelspace battery saver
- F2FS Gapid GC Support
- ZRAM optimizations
- Tuned westwood and added sociopath, vegas, htcp, hybla, dctcp, cdg, bic TCP Congestion Algorithms
DOWNLOAD | TELEGRAM GROUP | CHANNEL
​Contributors
XtremeOrnob
Source: https://github.com/XtremeOrnob/XDKernel
Version Information
Status: Stable
Current Version: S-1.6
Created: 22-05-2021
Last Updated: 03-11-2021
Nice work. Thanks a lot. How enable adreno boost?
NYGGAZ said:
Nice work. Thanks a lot. How enable adreno boost?
Click to expand...
Click to collapse
You'll find it in any kernel manager. Under GPU section.
Hi is this kernal support for pixel experience may update?
imcoolsj said:
Hi is this kernal support for pixel experience may update?
Click to expand...
Click to collapse
It technically should.
Xtreme.Ornob said:
It technically should.
Click to expand...
Click to collapse
Thank you .. PE dev metion about supporting pixel termals ? Is this ok with that
@Xtreme.Ornob Hi sir pls can u tell me about some powerful commits for the kernel???and pls can u tell me how to switch from linux 3.18 to 4.9 kernel??Pls pointwise tell me just short points .I still don't know how to to sudden upgrade to complete different version
BTW ur kernel is wonderful .My friend has poco f1 and he used it .He found it pretty stable and speedy
Devthor1487 said:
@Xtreme.Ornob Hi sir pls can u tell me about some powerful commits for the kernel???and pls can u tell me how to switch from linux 3.18 to 4.9 kernel??Pls pointwise tell me just short points .I still don't know how to to sudden upgrade to complete different version
BTW ur kernel is wonderful .My friend has poco f1 and he used it .He found it pretty stable and speedy
Click to expand...
Click to collapse
Bro I'm not really a pro in this game. And i don't think you can just simply upgrade from 3.18 to 4.x
Commits are device wise, SoC wise. So..
Thread Updated!! New Update!!
Here are the changes in XDKernel SnowCone S-1.2
- Implemented support for Android S
- Changes from lineage-18.1
- Upstream to latest Linux tag v4.9.286
- Upstream to latest CAF tag
- cpufreq_schedutil changes
- Many under the hood improvements (Say hello to new bugs lol)
Is it possible to achieve low (0.1-0.3%/h) idle drain in any kernel in F1? Had tried a fair few earlier like arter, OD, NGK, SC and a few others but on average it's around 0.5-0.8%/h (2G only with data off, WiFi/GPS/BT off). I did get low idle drain occasionally but they were few and far in between.
amn1987 said:
Is it possible to achieve low (0.1-0.3%/h) idle drain in any kernel in F1? Had tried a fair few earlier like arter, OD, NGK, SC and a few others but on average it's around 0.5-0.8%/h (2G only with data off, WiFi/GPS/BT off). I did get low idle drain occasionally but they were few and far in between.
Click to expand...
Click to collapse
Hello sir.
Yes it is possible if you have a very good freshly baked (fairly new) battery and can tune your Doze parameters so your device enters deep sleep and stays there.
I can suggest a few apps if you really wanna push it to deep sleep.
Currently, our beloved SDM845 device does not very much like to enter deep sleep. We can make it tho, but that would be like turning your phone into a mid-range SoC low-memory Android Go, Android One phone.
@amn1987 Sir, there are apps like Naptime, Servicely, Greenify, HEBF, Hibernator and the list goes on.
Do trial and error kind of a thing and you’ll achieve 0.00000000000001% idle drain. (Yes this was sarcasm and the rest is good stuff)
Xtreme.Ornob said:
Hello sir.
Yes it is possible if you have a very good freshly baked (fairly new) battery and can tune your Doze parameters so your device enters deep sleep and stays there.
I can suggest a few apps if you really wanna push it to deep sleep.
Currently, our beloved SDM845 device does not very much like to enter deep sleep. We can make it tho, but that would be like turning your phone into a mid-range SoC low-memory Android Go, Android One phone.
Click to expand...
Click to collapse
Deep Sleep doesn't seem to be an issue as it's regularly over 99%. Naptime, Servicely, Greeenify etc. didn't result in any noticeable improvement. Even when brand new idle drain was no better. I have experiented with Airplane mode, freezing most of the pesky apps but to no avail. If I don't block wakelocks like qcom-step-chg etc. idle drain is almost 3x.
I have an old SD650 device and that gets regularly 0.1-0.2%/h idle drain even 4+ years later. Overnight drain is frequently zero!
So I was wondering if in high performance SoCs if it's kinda the norm?
amn1987 said:
Deep Sleep doesn't seem to be an issue as it's regularly over 99%. Naptime, Servicely, Greeenify etc. didn't result in any noticeable improvement. Even when brand new idle drain was no better. I have experiented with Airplane mode, freezing most of the pesky apps but to no avail. If I don't block wakelocks like qcom-step-chg etc. idle drain is almost 3x.
I have an old SD650 device and that gets regularly 0.1-0.2%/h idle drain even 4+ years later. Overnight drain is frequently zero!
So I was wondering if in high performance SoCs if it's kinda the norm?
Click to expand...
Click to collapse
Yes sire. Also join t.me/xosden to continue the discussion.
THREAD UPDATED!!
Changes in XDKernel SnowCone S-1.4
- Merge Linux tag v4.9.287
- Fix for Bluetooth error on Android S
THREAD UPDATED!!
Changes in XDKernel SnowCone S-1.5
- Merge CAF tag 'LA.UM.10.3.r1-00300-sdm845.0'
- Merge Linux tag v4.9.288
THREAD UPDATED!!
Changes in XDKernel SnowCone S-1.6
- Merge Linux tag v4.9.289

Categories

Resources