I have a kate SD with resurection remix on android 7.1.
I have
-a cable micro USB-USB female
-this RJ45 adapter + USB 3.0 ports
https://www.amazon.com/UGREEN-Ethernet-1000Mbps-Nintendo-Chromebook/dp/B00LLUEJFU
[in the comments, people make it work on android TV but a guy with samsung tabalet has no rj45]
=>WHen I plug a wifi mouse in the cable micro USB-USB female, the mouse is detected
=>When I plug the USB Hub+rj45 adpater+cable, I do not get a ethernet connection, but I do get the wifi mouse. I tried with PLANE MODE and without. WIFI is OFF.
THe USB hub+rj45 works well on windows. How do I get it to work on android ?
THe driver for android+linux is here http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=131;71;112 How can I install it on my phone?
blue whale said:
I have a kate SD with resurection remix on android 7.1.
I have
-a cable micro USB-USB female
-this RJ45 adapter + USB 3.0 ports
https://www.amazon.com/UGREEN-Ethernet-1000Mbps-Nintendo-Chromebook/dp/B00LLUEJFU
[in the comments, people make it work on android TV but a guy with samsung tabalet has no rj45]
=>WHen I plug a wifi mouse in the cable micro USB-USB female, the mouse is detected
=>When I plug the USB Hub+rj45 adpater+cable, I do not get a ethernet connection, but I do get the wifi mouse. I tried with PLANE MODE and without. WIFI is OFF.
THe USB hub+rj45 works well on windows. How do I get it to work on android ?
THe driver for android+linux is here http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=131;71;112 How can I install it on my phone?
Click to expand...
Click to collapse
You will need to include this in android kernel and then flash that kernel. First learn how to compile kernel, then learn adding additional drivers and then compile your own kernel.
Related
Hi,
i recently gotten hold of an allwinner A31 device being the measy B4K. (http://www.measy.com.cn/product/showproduct75_en.htm)
I also gotten hold of a firmware update for this device from a guy that was in contact with measy support using a chinese friend:
http://www.freaktab.com/showthread....S918S-firmware&p=130534&viewfull=1#post130534
firmware rom download is here : https://alimail.alibaba.com/alimail...eb961&[email protected]
Now from what i've seen from other a31 devices is that you have to use the phoenixlivesuite to upload the firmware and you need usb debugging for this (the tool itselve says so also). but the device only has 2 female usb ports and no usb micro port not even on the PCB that i can see when i opend the box. One of the guys bought a normal male to male usb cable and tried in the diffrent usb slots but was not able to get any response. some others said that you need an usb otg cable but does that even exist for a usb male to male cable ? (if so where) if not would using a micro sd cable from my phone with a usb micro female to usb male adapter do the trick ?
also the img file is in some special format but it can be unpacked well almost all files using the tool from this thread http://forum.xda-developers.com/showthread.php?t=1753473 and it gives me all kind of *.fex files like uboot.fex, recovery.fex etc it only had problems with one fex file being sys_partition.fex but i did get a system.fex of 400mb.
i have root on the device also and i can get into recovery mode using a reboot to recovery apk however it's useless since i can't move around in it, the remote don't work, nor a keyboard attached to it and it has no physical buttons.
Anyway my main question is what sort of cable should i get to get this work a usb male to usb male or just some usb female to usb male adapter + usb micro phone cable to get usb debugging working so i can at least get windows to recognize the device.
I'm also posting this for other people since i don't think many people know about that firmware file for b4k, perhaps others having the same device have more luck
thanks
I am trying to use my flash drive with otg cable. I connected my atrix with a USB hub, powered it and also connected another pen drive to it but there was no notification.
Is otg not working in kitkat 4.4.4?? Didn't try in 4.2 or previous version.
maxultimate21 said:
I am trying to use my flash drive with otg cable. I connected my atrix with a USB hub, powered it and also connected another pen drive to it but there was no notification.
Is otg not working in kitkat 4.4.4?? Didn't try in 4.2 or previous version.
Click to expand...
Click to collapse
OTG is probably not going to work at this time. It is important to keep in mind that Z is working on stability and things along those lines. OTG is not something needed to have stability.
Try using the "USB host controller" app.
Hi,
does any of the countless i9100 (not "G") ROMs have OTG support?
Best regards,
toshibashi
CyanogenMod does support OTG.
Just checked with CM12.1.
And when i remember correctly, Cm11 worked as well.
I have cyanogenmod 12.1-20160106 Nightly-i9100 kernel 3.064-cm-gd71763e [email protected] #1. I have enable Android debug brigde and usb debbuging but OTG is not working. The cable is tested on a sony experia tablet and works fine with usb mouse and usb flash drive. I have also download several programs like USB OTG Helper, Stick (something), and others i don't remember. One of them said s3c usb host driver is missing. Any idea how to fix OTG?
Thanks in advance
What is OTG?
Web_Monster said:
What is OTG?
Click to expand...
Click to collapse
OTG is the ability of a phone to connect USB devices with an adapter connected to the microUSB port. You can connect keyboards or USB sticks, for example.
Well I run stock CM12.1 and never had any problem with OTG. I don't know if it might be the problem that your USB OTG adapter is not from Samsung?
Hi,
I can't connect with ethernet on my Remis OS USB key. Do you know if there is a solution?
Thanks
Mine works on my home pc.
NIC card built into Asus m5a97 motherboard. Usb drive boot
Brian
reliant_turbo said:
Mine works on my home pc.
NIC card built into Asus m5a97 motherboard. Usb drive boot
Brian
Click to expand...
Click to collapse
It doesn't work in my PC as well.
Same here, my Board has 2 onboard NICs. in ethernet settings RemixOS shows some (random?) MAC-Adress witch doesn't belong to any of them.
Ethernet not working
It does not work im my pc as well
dear all android developer and user , i've some curiosity regarding OTG and usb host.
-> is there any difference between OTG and USB Host? i run a portable usb speaker. it can detect that. some OTG suported device does support only pen drive/flash drive+Mouse+KyBrd. does not detect any HDD/USB speaker (eg Moto E 2nd/ local Chinese brand). i just want to know the difference of their OTG system. or usb host system.
-> My moto G gives over 4 volt through OTG and that can fluently run any portable HDD without any extra power (any rom). its tested and i use a portable HDD. did you found any other set with this feature? i didnt found any.
sorry for my long post. hope u'll share ur knowledge if got enough time to reply. thanks.