Hello, looking for some help to see if anyone can help me find the firmware of my A526U specifically for AT&T? I have moved my phone over from TMobile where I purchased it from, and am looking to re-flash it to AT&T. Was working fine for a few months, now I'm no longer able to make or receive calls.
After inserting the new AT&T SIM card, the TMobile splash screen still shows up. The Service Provider software version reflects TMobile still as well and I'm concerned that for whatever reason the phone did not fully update after inserting the new SIM. I spent 2 hours on the phone with AT&T support after the store said they couldn't help me. Pulled the SIM card out, restarted phone, put it back in, reset network settings etc. I've searched sammobile and I cannot find the AT&T firmware, only TMobile, Sprint, and TMK. I would sincerely be greateful please if anyone could help me by pointing me in the right direction for the firmware for this model phone.
AT&T doesn't make their firmware available publicly - for any device. I have a source who can get me Samsung firmware for any USA device - even AT&T. But he charges me for each one
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
aschaffer35 said:
I appreciate the quick response! Is there any option I have here? Could I try flashing a "U1" firmware to his phone then? He's currently on A526USQS4CVA6. I actually found your other post as I was also working on my note 10 plus - https://forum.xda-developers.com/t/n975u-and-n975u1-firmware-links-here.3957648/. If I'm reading that correctly, I should be able to correct? If so, how can I tell if the version I'm downloading is "downgrading the bootloader"
Click to expand...
Click to collapse
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
iBowToAndroid said:
1. Yes, you can try flashing U1 if you want
2. You can't "downgrade the bootloader" - Odin won't let you.
3. In A526USQS4CVA6, "4" is the position of the bootloader level/revision/binary. Make sure that whatever U1 firmware you download also has a 4 in that spot and you'll be fine. (Or just get the firmware from Frija or one of the other similar firmware download tools, because those throw you whatever the newest version is automatically)
Click to expand...
Click to collapse
Thank you very much sir! I shall give this a go this weekend! You guys rock!
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
blackhawk said:
My AT&T N10+ N975U is running on Pie. It transitioned seamlessly with no changes made on my end. It was already using 4G VoLTE though. Same sim card.
I would contact AT&T advanced tech support as there may be an easier way.
4G VoLTE needs to be enabled in hidden settings.
Click to expand...
Click to collapse
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
iBowToAndroid said:
Your AT&T phone? So it's originally an AT&T model that you're still using with them? That's not the same situation that the OP is in
Click to expand...
Click to collapse
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
blackhawk said:
The U is the AT&T variant vs the U1 which is the unlocked variant, correct?
Click to expand...
Click to collapse
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
iBowToAndroid said:
Yup. But OP has a T-Mobile model that they moved to AT&T. There's also no guarantee that a Note 10+ will work the exact same way as an A52. You're also running 3 year old firmware, while OP is fully updated.
So i don't see the correlation.
Click to expand...
Click to collapse
The old firmware works fine on 4G VoLTE... that's likely not the issue. What is the issue is it wasn't running on 4G VoLTE so it's likely the settings and sim card need updating not the firmware.
Hi All, thought I would provide an update... After spending hours on the phone with AT&T support this week and being frustrated with the AT&T store, I decided to proceed forward with flashing the U1 version. What started this all was last week my son could no longer make or receive calls on his AT&T A52 phone (we ported it from TMobile September 2021). The store and AT&T advanced tech support said there were issues with people's BYOD devices, even though the A526U and A526U1 shows on the supported devices list. The store rep said he's been getting people in left and right that can't make or receive calls, and all they can do is upsell customers to an AT&T branded phone.
SO... my son's phone was on A526USQS4CVA6. Startup screen showed TMobile still, even with the AT&T SIM card in it. I proceed to flash the A526U1OYM4CVB2_ATT that I found from Sammobile. Was hoping someone had just the "U" version but I couldn't find this anywhere. When doing the flash, I used the Home_CSC file (I had to download a patched version of ODIN as it was stuck as setting up connection) and when it finished it would just keep going back to the download screen on the phone and I freaked out. I did some more research and decided to flash again using CSC instead of Home.CSC (I did a backup using smart switch on my PC luckily). This WORKED! I'm guessing because the software version he was on was different than what I was trying to flash too so maybe this is why I needed the CSC for a clean flash (there was no user data file that downloaded from SAMMOBILE).
Now, calls are working on my son's phone again! AND his service provider software version now reflects ATT vs TMB! Man this has been one heck of a journey lol. I've seen numerous forums on google of people having the same trouble with me, their BYOD devices not working. Seems a flash of U1 worked for me, so hopefully this helps others out there!
I'm at my wit's end on this. Calls stopped working the other day due to 3G disablement as far as I can tell. AT&T model unlocked and using with Simple Mobile on T-Mobile network. Calls would just say "Calling" for a long time and then eventually disconnect. I could switch to GSM and make calls again, but slow data. Simple told me to get a new SIM and when trying to activate, it shows ineligible IMEI due to no Volte it seems.
I'm trying to get that fixed, but running into various issues.
LM-G850UM
I tried to crossflash (https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/)
I flashed G850QM30c_00_NAO_US_OP_0224.kdz but it didn't ask me to change the model, so it still shows LM-G850UM software G850UM30c. IMEI is the same.
Since this didn't get calls back or Volte, I tried updating the MBN (https://forum.xda-developers.com/t/...ther-qualcomm-powered-lg-devices-too.4343655/)
Data shows 4G. Calls don't even try to connect.
I don't know what to do next and don't have much time to try to figure it out. I like the G8X, so I'm hoping there's a way to save it.
Any thoughts from the experts?
Brando81 said:
I'm at my wit's end on this. Calls stopped working the other day due to 3G disablement as far as I can tell. AT&T model unlocked and using with Simple Mobile on T-Mobile network. Calls would just say "Calling" for a long time and then eventually disconnect. I could switch to GSM and make calls again, but slow data. Simple told me to get a new SIM and when trying to activate, it shows ineligible IMEI due to no Volte it seems.
I'm trying to get that fixed, but running into various issues.
LM-G850UM
I tried to crossflash (https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/)
I flashed G850QM30c_00_NAO_US_OP_0224.kdz but it didn't ask me to change the model, so it still shows LM-G850UM software G850UM30c. IMEI is the same.
Since this didn't get calls back or Volte, I tried updating the MBN (https://forum.xda-developers.com/t/...ther-qualcomm-powered-lg-devices-too.4343655/)
Data shows 4G. Calls don't even try to connect.
I don't know what to do next and don't have much time to try to figure it out. I like the G8X, so I'm hoping there's a way to save it.
Any thoughts from the experts?
Click to expand...
Click to collapse
Make a back up,and cross flash it with T-Mobile firmware.Problem solved.
Thanks Surge!
I crossflashed to general firmware. Where's the best place for the TMobile firmware? Just off their website? Will that lock the phone again, or will I still be able to use the Simple Mobile Service?
Brando81 said:
Thanks Surge!
I crossflashed to general firmware. Where's the best place for the TMobile firmware? Just off their website? Will that lock the phone again, or will I still be able to use the Simple Mobile Service?
Click to expand...
Click to collapse
It shouldn't lock the device if it's already unlocked.You can also use G8 firmware as well.(same device)Look here,this should get you the firmware you need.
Models - LG-Firmwares.com
Free archive of LG firmwares. Comparison of features and reviews of all mobile devices. Quick download of updates for your device.
lg-firmwares.com
Thanks again, Surge.
That's where I got my KDZ before. I used the one here: https://lg-firmwares.com/lg-lmg850qm-firmwares/ and used the 3/24/22 version for Android 11. When I flashed it with LG UP, it didn't ask me to change models, which I'm not sure if that's why it didn't trigger it to start working again.
Brando81 said:
Thanks again, Surge.
That's where I got my KDZ before. I used the one here: https://lg-firmwares.com/lg-lmg850qm-firmwares/ and used the 3/24/22 version for Android 11. When I flashed it with LG UP, it didn't ask me to change models, which I'm not sure if that's why it didn't trigger it to start working again.
Click to expand...
Click to collapse
Most are using the international firmware for the G8 and G8x models.Which is what the qm firmware is.If you're carrier is T-Mobile or any T-Mobile MVNO,I would solely use T-Mobile firmware.My G8x is AT&T branded and factory unlocked,and I tried using Tmobile service about 2 months ago and was having issues sending text messages.I could place and receive calls and get text but couldn't send them period.
Yeah, so my G8X is AT&T unlocked. AT&T didn't activate VOLTE on this model, so when T-Mobile shut down their 3G network, Simple Mobile calls won't work and the current IMEI shows it's not eligible (because of the model.) At least that's my understanding so far.
So for the G8, is this the firmware I should crossflash? https://lg-firmwares.com/lg-lmg820tm-firmwares/ or I could try the QM which may or may not work. Is that correct? Basically going to the 820 firmwares instead of the 850?
Brando81 said:
Yeah, so my G8X is AT&T unlocked. AT&T didn't activate VOLTE on this model, so when T-Mobile shut down their 3G network, Simple Mobile calls won't work and the current IMEI shows it's not eligible (because of the model.) At least that's my understanding so far.
So for the G8, is this the firmware I should crossflash? https://lg-firmwares.com/lg-lmg820tm-firmwares/ or I could try the QM which may or may not work. Is that correct? Basically going to the 820 firmwares instead of the 850?
Click to expand...
Click to collapse
I would go with the T-Mobile firmware since you're on their network.It wouldn't make a difference with VoLTE enabled with an AT&T sim.Once you pull the sim,and swap it it defaults back and turns the IMS settings off until it receives the configuration from their servers.Yes,820 firmware.It at least has the higher android builds,and better security patches.Once you put T-Mobile firmware on the device it should all work regardless of IMEI.
Edit:Make a back-up.Don't forget to do that first!
OK Surge....you've been helpful and seem to know what you're doing. What did I mess up?
I followed the cross flash instructions. I flashed the 820QM firmware first, and System loaded but the touchscreen wouldn't respond. I could only use the hard phone buttons. Decided to go to what you recommended with 820TM and it wouldn't boot at all - black screen - but I could still get to QFIL and LGUP.
I reflashed 850QM and touchscreen works again and I'm back to where I started.
When I flashed 820s, It did ask me if I wanted to change model numbers this time and I said Yes. And it asked it said it was changing some partitions on the 820 loads.
I may have been working on this too late. I appreciate your help so far.
Brando81 said:
OK Surge....you've been helpful and seem to know what you're doing. What did I mess up?
I followed the cross flash instructions. I flashed the 820QM firmware first, and System loaded but the touchscreen wouldn't respond. I could only use the hard phone buttons. Decided to go to what you recommended with 820TM and it wouldn't boot at all - black screen - but I could still get to QFIL and LGUP.
I reflashed 850QM and touchscreen works again and I'm back to where I started.
When I flashed 820s, It did ask me if I wanted to change model numbers this time and I said Yes. And it asked it said it was changing some partitions on the 820 loads.
I may have been working on this too late. I appreciate your help so far.
Click to expand...
Click to collapse
I think someone else encountered this once before,and it was caused by certain manufacturering dates of the device.Some models can use 820 firmware,and some can only use 850.Looks as if yours is kind of stuck with 850 firmware only.I think the AT&T version I have I could go either way it worked with no problems.I still have my G8x but never really used it.I bought it because it came with the dual screen attachement,and $125 I took it.Here's my Sprint copy if you want to give it a try.It's a LUNS copy minus LUNS 5 for IMEI information etc.I was in the same boat as you on certain features not working with AT&T at one point myself and had to crossflash the Sprint version of the device.With that being said,try this one from LG Fans first.If that doesn't work,try my LUNS Sprint copy and let me know which ones works the best.
LG G850UM | LG G8X ThinQ | Version: G850UM30a_00_0901 | Firmware for Region: CAN from - Lg-firmwares.com
LG G850UM Download the latest version of firmware | OS Version: Android 11 R | Firmware version: G850UM30a_00_0901 | CAN - Fan club LG-firmwares
lg-firmwares.com
Sprint LG G8x Last Update - Google Drive
drive.google.com
So interesting news....I obviously didn't try making calls last night at 2AM, but apparently reflashing with the same exact 850QM software I used before seems to have fixed the issue. Maybe changing the model to 820 and then changing back to 850? Who knows? That's like the 3rd thing that happened with this process that I have no idea why it started working differently, but hey I'm happy and back up and rolling.
Thanks for all of your help, Surge! I was truly at wits end, and had already ordered a new phone, even though I'm happy with the G8X overall. Now I can return that and keep rolling with the G8X.
Thanks again, you were a huge help and its much appreciated!
Brando81 said:
So interesting news....I obviously didn't try making calls last night at 2AM, but apparently reflashing with the same exact 850QM software I used before seems to have fixed the issue. Maybe changing the model to 820 and then changing back to 850? Who knows? That's like the 3rd thing that happened with this process that I have no idea why it started working differently, but hey I'm happy and back up and rolling.
Thanks for all of your help, Surge! I was truly at wits end, and had already ordered a new phone, even though I'm happy with the G8X overall. Now I can return that and keep rolling with the G8X.
Thanks again, you were a huge help and its much appreciated!
Click to expand...
Click to collapse
Glad you got it working!I run in to a same similar issue with a Note 8 I have,and it being an international unlocked AT&T phone.No calls would work period,and swapped firmware over and over and finally started to give up and flashed the stock firmware back and it worked.It's something that hangs in Android with the changed IMS settings that are sent to the device.It's all odd at the moment with carriers,but nothing surprises me anymore..lol..
"G850QM30c_00_NAO_US_OP_0224.kdz" Is a BPT kdz and is not truly open even though it says, "NAO US OP".
I got the phone working by using "G850QM30b_00_NAO_US_OP_0902.kdz", the "real" open kdz. Everything worked fine after that.
BereiBlue said:
"G850QM30c_00_NAO_US_OP_0224.kdz" Is a BPT kdz and is not truly open even though it says, "NAO US OP".
I got the phone working by using "G850QM30b_00_NAO_US_OP_0902.kdz", the "real" open kdz. Everything worked fine after that.
Click to expand...
Click to collapse
Can someone please explain to me the different versions of the firmware
BPT and CCT and USA
are they really different
there is also the 40A now which is android 12?
G850QM40b_00_NAO_US_OP_0805.kdz
https://lg-firmwares.com/lg-lmg850qm-firmwares/
most of these firmwares are are 4GB in size, the newer KDZ are just 1GB
G850QM30c_00_NAO_US_OP_0224.kdz
My ATT G8X just got the update to G850QM40A which is android 12
how is android 12? do the firehose , root and bootloader unlock apply
doctorman said:
Can someone please explain to me the different versions of the firmware
BPT and CCT and USA
are they really different
there is also the 40A now which is android 12?
G850QM40b_00_NAO_US_OP_0805.kdz
https://lg-firmwares.com/lg-lmg850qm-firmwares/
most of these firmwares are are 4GB in size, the newer KDZ are just 1GB
G850QM30c_00_NAO_US_OP_0224.kdz
My ATT G8X just got the update to G850QM40A which is android 12
how is android 12? do the firehose , root and bootloader unlock apply
Click to expand...
Click to collapse
Yes,the firehose will always work regardless of the Android version.Also from what I have read,yes the same procedures work for A12 for root and unlocking the bootloader.As always,backup your firmware before rooting and attempting to unlock the bootloader just in case something goes wrong!
Surgemanxx said:
Yes,the firehose will always work regardless of the Android version.Also from what I have read,yes the same procedures work for A12 for root and unlocking the bootloader.As always,backup your firmware before rooting and attempting to unlock the bootloader just in case something goes wrong!
Click to expand...
Click to collapse
Do you think there is any point to crossflash
USA G850QM40b_00_NAO_US_OP_0805.kdz
on ATT G8X to be used on Tmobile network? I can do the VOLTE patch after rooting it . is it worth the headache?
doctorman said:
Do you think there is any point to crossflash
USA G850QM40b_00_NAO_US_OP_0805.kdz
on ATT G8X to be used on Tmobile network? I can do the VOLTE patch after rooting it . is it worth the headache?
Click to expand...
Click to collapse
QM versions are international unlocked versions of the firmware.My branded AT&T G8x had issues sending text messages with T-Mobile service I do remember.I crossflahed my variant with the QM version and it worked flawless after that.But,I do have a full backup copy of the AT&T firmware if I ever decide to put it back.
Surgemanxx said:
QM versions are international unlocked versions of the firmware.My branded AT&T G8x had issues sending text messages with T-Mobile service I do remember.I crossflahed my variant with the QM version and it worked flawless after that.But,I do have a full backup copy of the AT&T firmware if I ever decide to put it back.
Click to expand...
Click to collapse
May I ask how did you back it up?
also if I have androind 11 ATT can I crossflash to android 12? that should not be an issue right?
the partitioning is not changed in the update?
Hey guys,
Is there an easy way to flash the Non-Carrier specific firmware on this TMO S23 Ultra that's still locked since it's under a payment plan? I did it on an older VZW S21 and seem to remember the XAA version of the firmware meant just the Samsung release with no carrier specific apps, etc., but I can't find that to download at samfw.com. I don't want or need it unlocked per se as I'm staying with TMO but I just want to get rid of the TMO splash screen and some of the bloat. Oh and bring back just the straight spam protection from Samsung as this T-Mobile Spam Guard thing doesn't really work very well.
Do we know if that's possible yet this early with the S23 Ultra, or do we have to wait for a couple OTAs to hit first?
Thanks in advance for anybody's input or advice!
The phone is brand new. It normally takes a while for the firmware to come available. I have seen a thread with links for firmware but I don't remember what versions they were.
SM-S918U S23 ULTRA/918U1 UNITED STATES FIRMWARE FLASHING
Most of us already know how to flash firmware with Odin. Here, anyone can post available firmware for everyone to use as well as general discussion. U firmware can be flashed on a U1 device and U1 firmware can be flashed on a U device using Odin...
forum.xda-developers.com
It is possible and is thread linked in the post above is your best resource to get that done. Just be aware that flashing to the U1 firmware will not remove the SIM lock on your device and if you ever choose to have the SIM lock removed, you will need to be on the full TMB U firmware to do so.