I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
As we all know - the tablet does not support treble. And we do not have a separate /vendor partition, i'm using /cache as /vendor.
Instructions
1. flash my twrp from link above - this is latest twrp with system_image support, it need to restore system treble images
2. download system image from https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Known Issues
1. rotate sensor working, but strange - on rotate tablet show black screen for a moment and then back to normal in right state
2. SM-T580 only: gps
Links
Treble images
SM-T585:
1. 20180827: initial treble: https://drive.google.com/file/d/1uX5JYqLCTMPpT5Zx2Wvi0U-Ms49S0YrW/view?usp=sharing
2. 20180904: camera recording in oreo images, both sdcards in pie images: https://drive.google.com/file/d/1cTEXJb9n5oZad0O3DXT5nlEhnlBDP6QB/view?usp=sharing
3, 20180906: remove shim for mediaserver - only for pie!!!: https://drive.google.com/file/d/1C0MfHt0SNYL4hD-BtOj3i7O_qBBPD25t/view?usp=sharing
SM-T580:
1. 20180828: initial treble: https://drive.google.com/file/d/1sgB1xQjRWyGM1OfF73Yhl5vRNunP04iK/view?usp=sharing
2. 20180904: camera recording in oreo images, both sdcards in pie images: https://drive.google.com/file/d/13WL9_Q_WoStf0WVHbmoYaL2CHbCluzNO/view?usp=sharing
3, 20180906: remove shim for mediaserver - only for pie!!!: https://drive.google.com/file/d/15dN2DugPBjhi_m0SOy4qYwVmR03nyY69/view?usp=sharing
Root
Use Magisk, it's should work. If during install Magisk give error about missed /vendor, run my prepare script and the install Magisk: https://drive.google.com/file/d/10JnOtyF5Y_4q1OE3FOZYPDcR7TK1jRhA/view?usp=sharing
GApps - Pie only!!!
Right now on T580\T585 pie images with gapps dnw, it's stuck on the start wizard, what is strange.
Solution: flash image without gapps and then flash gapps. It's working. I'm playing right now with aosp 9.0 and gapps.
We have 32bit recovery and right now standalone gapps think about arm and 6.0.1 version, what is wrong. I took gapps from https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141 and fix script inside to arm64 and right sdk version, this is gapps with my fix, what should work on T580\T585: https://drive.google.com/file/d/1kkHUPSznfibcER0DV89GhDdepEjqjCl9/view?usp=sharing
How install gapps:
1. install treble image, then pie system image
2. boot to system
3. restart to twrp and install gapps
4. boot to system, go to play market and login
For now working only this sequence
Recovery
SM-t585:
1. twrp-3.2.3-0: https://drive.google.com/file/d/16D-sFDt41n-wxNu1A0q01oRRKiZ-AsfF/view?usp=sharing
SM-T580:
1. this is original twrp (from https://dl.twrp.me/gtaxlwifi/twrp-3.2.3-0-gtaxlwifi.img.html), I just added system_image support and repack: https://drive.google.com/file/d/10LgZ1rabkgVSyIyd38BxIxNr22_9PJY5/view?usp=sharing
All firmware say about wrong vendor version. This is normal, just press OK.
System images:A only and 64Bits
Checked firmwares
Almost all oreo roms from treble's thread working.
Even new Android 9.0 Pie roms working, but it has issue with sdcard, it will require additional checks from me.
Installation
1. (optional): "Wipe\Format Data": type yes and press ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. wipe data: "Wipe\Advanced Wipe" and select "Dalvik/ARP Cache" / "Data" / "Internal Storage" / "System" / "Cache"
3. install treble: "Install", then navigate to lineage-15.1-20180827-treble.zip and "Swipe to confirm Flash"
4. install system: "Install", then press "Install Image" then navigate to system images, then select "System Image" and "Swipe to confirm Flash"
5. reboot
let's experiment together!
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
As we all know - the tablet does not support treble. And we do not have a separate /vendor partition, i'm using /cache as /vendor.
Instructions
1. go to the current twrp and full wipe
2. flash my twrp - this is latest twrp with system_image support, it need to restore system treble images (twrp-3.2.3-0-gtaxlltexx.img): https://drive.google.com/file/d/16D-sFDt41n-wxNu1A0q01oRRKiZ-AsfF/view?usp=sharing
3. flash zip with vendor data and boot image (lineage-15.1-20180827-treble.zip): https://drive.google.com/file/d/1uX5JYqLCTMPpT5Zx2Wvi0U-Ms49S0YrW/view?usp=sharing
4. now you device is ready to flash any treble system image from: https://forum.xda-developers.com/project-treble/trebleenabled-device-development - download img, copy to sdcard and then flash as system image in twrp
5. if you wanna check another rom, just make 1-4 again
Known Issues
1. video-recording
2. rotate sensor working, but strange - on rotate tablet show black screen for a moment and then back to normal in right state
All firmware say about wrong vendor version. This is normal, just press OK.
System A only
Checked firmwares
Almost all oreo roms from treble's thread working.
Even new Android 9.0 Pie roms working, but it has issue with sdcard, it will require additional checks from me.
let's experiment together!
Click to expand...
Click to collapse
You are amazing dude thanks so much for releasing this to us. Keep up the great work.
Wow, can you Do the same for the WiFi Version SM-T580?
This is by far the best news for our device. I am wondering if when we'll get official Oreo, Samsung will provide us with a treble rom as well.
Thanks Valera for you support.
I get "No OS installed"
Wow. Good job, my friend! I already want to try it on T580 wifi version. I remember that the roms of t585 work in the wifi version, can you flash this without problems?
Many cravings
Thank you!
paulo boë said:
I get "No OS installed"
Click to expand...
Click to collapse
just ignore this error. look like twrp not quite correctly handle the situation with restore via system_image and think that there is no system.
alanloax said:
Wow. Good job, my friend! I already want to try it on T580 wifi version. I remember that the roms of t585 work in the wifi version, can you flash this without problems?
Many cravings
Thank you!
Click to expand...
Click to collapse
I can build version for t580, the kernel and almost all stuff is not a problem, question only in the gps. In the t585 it's connect to the ril, but t580 using own gps chip. I don't know, where I can get 64bit binary for it. In case of t585 i'm using proprietary bin\libs from a5'17. Need to check, can I use 32bit gps in 64bit system.
And may be can be a problems (not sure now) - all treble's images created for phones. tablet with lte is close to phone, but not a witi version. but in any way - it's need to check.
Valera1978 said:
I can build version for t580, the kernel and almost all stuff is not a problem, question only in the gps. In the t585 it's connect to the ril, but t580 using own gps chip. I don't know, where I can get 64bit binary for it. In case of t585 i'm using proprietary bin\libs from a5'17. Need to check, can I use 32bit gps in 64bit system.
And may be can be a problems (not sure now) - all treble's images created for phones. tablet with lte is close to phone, but not a witi version. but in any way - it's need to check.
Click to expand...
Click to collapse
Oh I understand. Luckily I use little the gps. At least to try haha.
Thank you very much again for contributing to these devices, very good work!
Valera1978 said:
just ignore this error. look like twrp not quite correctly handle the situation with restore via system_image and think that there is no system.
Click to expand...
Click to collapse
And still it reboots over and over. The Galaxy Tab logo, then 6 7 secs black screen and the the Galaxy tab logo again.
paulo boë said:
And still it reboots over and over. The Galaxy Tab logo, then 6 7 secs black screen and the the Galaxy tab logo again.
Click to expand...
Click to collapse
Did you flashed anything other than rom? Magisk, gapps?
EugenStanis said:
Did you flashed anything other than rom? Magisk, gapps?
Click to expand...
Click to collapse
Nope, but I kinda forgot to mention that I use it on the T580
Hey, very good job. Please make a 580 version, GPS doesn't matter. You said it was experimental.
paulo boë said:
Nope, but I kinda forgot to mention that I use it on the T580
Click to expand...
Click to collapse
It's cannt work on T580 right now, because treble require changes in DTB. Without DTB changes system cann't mount /cache as /vendor and you will get boot before animation.
Will try build T580 today.
Please someone check version for T580
Valera1978 said:
Please someone check version for T580
Click to expand...
Click to collapse
And the twrp for t580? Cuz when I flash I get "this is for wifi this is lte"
Also can you post some screenshots with a link to the treble rom that works?
paulo boë said:
And the twrp for t580? Cuz when I flash I get "this is for wifi this is lte"
Click to expand...
Click to collapse
are your right now on twrp for lte? In this case in the gtaxlwifi-20180828-treble.zip - go to "\META-INF\com\google\android\updater-script" and remove first line with assert
Or you can use my twrp repack for t580: https://drive.google.com/file/d/10LgZ1rabkgVSyIyd38BxIxNr22_9PJY5/view?usp=sharing
this is original 3.23 version, I added only system-image
Valera1978 said:
are your right now on twrp for lte? In this case in the gtaxlwifi-20180828-treble.zip - go to "\META-INF\com\google\android\updater-script" and remove first line with assert
Or you can use my twrp repack for t580: https://drive.google.com/file/d/10LgZ1rabkgVSyIyd38BxIxNr22_9PJY5/view?usp=sharing
this is original 3.23 version, I added only system-image
Click to expand...
Click to collapse
I flashed it. Tried to flash a img, but still reboots back into galaxy logo
paulo boë said:
I flashed it. Tried to flash a img, but still reboots back into galaxy logo
Click to expand...
Click to collapse
can you send me /data/tombstones and /proc/last_kmsg?
SM-T285YD
Hi,
I have twrp for SM-T285YD but I cannot find any rom for my SM-T285YD. So can I flash this rom in my SM-T285YD.
If not then tell me what I need to do to get it working in my SM-T285YD and also I have the twrp but tell me how can make my twrp treble supported twrp....
Best regards....
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Huawei Mate 8 (NXT)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Code:
[COLOR="red"][B]WARNING:[/B] since 3.1.0-2 update we've enabled image flashing to special partitions -
not just /recovery or /boot partition.
That means your device could be bricked in a few seconds if you do not pay attention
or don't know what you're doing. (Noobs please stay away out of this section!)[/COLOR]
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-1-next.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official SuperSU (not just 2.82+)[/U][/B]
1. Ensure you are running stock kernel from b380+
2. Tick the option "Keep vendor partition mounted" inside OpenKirin Settings
3. download and install [URL="www.supersu.com/download"]official SuperSU[/URL]
4. Enjoy!
[B][U]2. Custom SuperSU[/U][/B]
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device (except kirin 960 based) running emui 5.x without loop support.
[B][U]3. Magisk[/U][/B]
1. ensure you are running a kernel from b380 or later
2. flash magisk
3. enjoy root & safetynet (read note)
[B][COLOR="red"]NOTE:[/COLOR][/B] Magisk Hide is a known problem on Huawei/Honor devices.
Make sure you are not rebooting/turning off your device with Magisk Hide enabled!
You may face a broken fingerprint scanner, do not worry,
simply disable magisk hide and reboot - fps works again!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_next/releases/download/3.1.1-1/twrp-3.1.1-1-next.img"][U]download twrp-3.1.1-1-next.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 10. June 2017
Q: which Mate 8 models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
yes, you can! (have a look at the instructions in FAQ)
Q: Can i install LOS or AOSP based roms with this TWRP?
yes, you can! (please follow the installing procedure in the corresponding rom thread)
Q: Can i install Magisk?
A: Every ROM based upon b380+ kernel should now include proper loop support.
Since 3.1.0-3 you are able to flash Magisk through TWRP (recovery kernel has been updated)
Q: Does official SuperSU work?
A: Yes, even though chainfire included a fix in his upcomming version,
you can use every version of it, just check the "Rooting Instructions" section.
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with forceencrypt disabled
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
[TWRP][3.1.1-0][MATE 8][DECRYPTION SUPPORT], Tool/Utility for the Huawei Mate 8
Contributors
OldDroid, XePeleato, surdu_petru
Source Code: http://ttps://github.com/OpenKirin
Version Information
Status: Stable
Created 2017-04-08
Last Updated 2017-06-11
Reserved
TWRP 3.1.0-1 next for encrypted/ decrypted data
This post has been deplaced here. I'll remove it when the TWRP above will work for encrypted/ decrypted data.
Thanks for comprehension!
I'm glad, that we can help the Mate 8 community
Thanks for distribution ...
The themes are here now.
Thanks!
Thak you very much.
I have your "Boot_Insecure_B560_Fix-adb_dm-verity.img" installed. Do you recomend to go back to stock boot and use this TWRP for any flashing? Or shoud i stay in a insecure boot?
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Us there 2 differnt versions of this twrp 1 for decripted data and 1 for formated data ??
jac10000 said:
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Click to expand...
Click to collapse
We can see what we can do with the both. A merger is perhaps possible?!
Edit:
Already it works with untouched boot.
With no formatted datas, it seems to me.
jac10000 said:
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Click to expand...
Click to collapse
Thank you very much for your test
As I can see it's working for decrypt unmodified /data if mount point to /dm-0 ...
franzyroy said:
We can see what we can do with the both. A merger is perhaps possible?!
Edit:
Already it works with untouched boot.
With no formatted datas, it seems to me.
Click to expand...
Click to collapse
I make a new TWRP, but should be tested in the same conditions like @jac10000 !
Also, please @jac10000, if you can test my new release to see if it decrypt /data , thanks !
EDIT :
Please, @franzyroy - you should test TWRP with unmodified data, so if your data was modified by wipe or format, you should restore device to Stock Huawei Firmware N by /dload/UPDATE.APP method . Thanks !
Downloads : twrp-3.1.0-next-v2.img md5 : 7ee1833ea51bf3835efc23851ad9a011
surdu_petru said:
Thank you very much for your test
As I can see it's working for decrypt unmodified /data if mount point to /dm-0 ...
I make a new TWRP, but should be tested in the same conditions like @jac10000 !
Also, please @jac10000, if you can test my new release to see if it decrypt /data , thanks !
EDIT :
Please, @franzyroy - you should test TWRP with unmodified data, so if your data was modified by wipe or format, you should restore device to Stock Huawei Firmware N by /dload/UPDATE.APP method . Thanks !
Downloads :twrp-3.1.0-next-v2.imgmd5 : 7ee1833ea51bf3835efc23851ad9a011
Click to expand...
Click to collapse
It seemed to me that dexz had tested it like that.
If I can test it, I'll do it. In the week, it's not really possible for me. @dexz should can do it.
jac10000 said:
Sorry but this twrp have not decryption support.
Have you test it on Mate 8 with no formated datas ? and boot with no disabled encryption ? with untouched boot ?
On my mate 8 with encrypt datas it don't work
I don't see my internal sdcard
But I take this twrp and I changed some parameters and it work fine for me .
TWRP-3.1.0-0_Decrypt_Mate-8.img
But it must be used on really encrypt datas, not formated .
I flash suspersu on an untouched boot and system and I'm root .
Click to expand...
Click to collapse
With the TWRP here, the root works too.
surdu_petru said:
Thank you very much for your test
As I can see it's working for decrypt unmodified /data if mount point to /dm-0 ...
I make a new TWRP, but should be tested in the same conditions like @jac10000 !
Also, please @jac10000, if you can test my new release to see if it decrypt /data , thanks !
EDIT :
Please, @franzyroy - you should test TWRP with unmodified data, so if your data was modified by wipe or format, you should restore device to Stock Huawei Firmware N by /dload/UPDATE.APP method . Thanks !
Downloads :twrp-3.1.0-next-v2.imgmd5 : 7ee1833ea51bf3835efc23851ad9a011
Click to expand...
Click to collapse
The one I tested and working yesterday was with /dm-0 before you posted another version.
Anyway twrp-3.1.0-next-v2.img is working fine and decrypted. Using adb shell mount. it show /data is on /dev/block/dm-5 the same with the one I have tested before.
Edit : I got force reboot using twrp-3.1.0-next-v2 after 5 seconds
Edit2 : It's only stop force reboot when I got the "Unmodified System Partition" screen.
Edit3 : I see force reboot stop if there's no changes on twrp setting (example time zone, language & etc)
@surdu_petru
Yes I just test it this twrp-3.1.0-next-v2.img and like @dezx I have force reboot when I use TWRP File Manager
dexz said:
The one I tested and working yesterday was with /dm-0 before you posted another version.
Anyway twrp-3.1.0-next-v2.img is working fine and decrypted. Using adb shell mount. it show /data is on /dev/block/dm-5 the same with the one I have tested before.
Edit : I got force reboot using twrp-3.1.0-next-v2 after 5 seconds
Edit2 : It's only stop force reboot when I got the "Unmodified System Partition" screen.
Edit3 : I see force reboot stop if there's no changes on twrp setting (example time zone, language & etc)
Click to expand...
Click to collapse
jac10000 said:
@surdu_petru
Yes I just test it this twrp-3.1.0-next-v2.img and like @dezx I have force reboot when I use TWRP File Manager
Click to expand...
Click to collapse
Perhaps you should make that and send the console.recovery.log to @surdu_petru or @OldDroid because if they have made the TWRP with mine, it's perhaps the cause.
@surdu_petru
---->logs
Thanks guys for feedback
I'll upload a new version very soon, hope will fix reboot issues !
I say that because :
I have no issues with a prerooted boot
It's also with Decrypted data boot
I can install a zip without to see an error
I see the internal storage
I can also see the size, not 0 MB
Only thing which doesn't work fine, when I mount the data, it's unmounted in the 5 seconds.
surdu_petru said:
Thanks guys for feedback
I'll upload a new version very soon, hope will fix reboot issues !
Click to expand...
Click to collapse
Thank you. Looking forward to it.
Sorry I'm out of like bullet :laugh:
New Test Version 3 !
Downloads : twrp-3.1.0-next-v3.img md5 : d969789ee06d3d323a98d9f028e6f475
Thank you for the feedback
It includes DRM patch and disabled force encryption.
Because fstab.qcom has been moved to system since 8.0, I cannot modify the boot image.
Some of you guys might have a problem with TWRP encryption password. With stock kernel, /data will be encrypted in a few boots even if you set no password.
About this kernel:
- Working camera (DRM-patch)
- Disabled dm-verity (so we can use magisk)
- Can mount /data in recovery (it means we can install magisk inside /data)
- Pass both safetynet
- You can still encrypt any time
- It will not decrypt your data. In other words, you have to do factory reset (wipe data) if it's already encrypted.
- See encryption status in Setting->Security
You can download from the attachments.
41.3.A.2.24
G8231 - View attachment xzs-p3-2.24.zip Based on Nordic Combined
G8232 Dual - View attachment xzsd-p3-2.24.zip Based on Customized TH
41.3.A.0.401
G8231 - Download from a thread by @Pandemic
G8232 Dual - View attachment xzsdp3.0.401-unzip.zip Based on Customized VN (for fingerprint)
Also, patch View attachment drmfix.zip before first system boot.
41.2.A.7.76
G8231 - View attachment xzs-p2.7.76.img.zip
G8232 Dual - View attachment xzsd-p2.7.76.img.zip
41.2.A.7.65
G8231 - View attachment xzs-p2.7.65-extract-first.zip
G8232 Dual - View attachment xzsd-p2.7.65-extract-first.zip
41.2.A.7.53
G8231 - View attachment 8231-boot753noencrypt.zip
G8232 Dual - View attachment boot-7.53-noforceencrypt.zip
It's not flashable zip, so please extract before use.
It will bootloop if you flash wrong version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How to disable by yourself? - Not for Oreo
Prerequisite:
- 32-bit linux (you can use it on liveboot drive or VM)
It doesn't work on cygwin (windows) because of its native executable. So use linux 32 bit (i386), or 64 bit (amd64) with multiarch.
- Unpack using mkbootimg tool made by xiaolu (I tried kitchen and it won't work)
- Open fstab.qcom
- Replace "forceencrypet" with "encryptable"
- Pack again
- Done!
Thanks tobias.waldvogel and xiaolu for their awesome tools.
If you have any question, feel free to ask me or some nice guys here.
zlRampageSlz said:
Some of you guys might have a problem with TWRP encryption password. With stock kernel, /data will be encrypted in a few boots even if you set no password.
About this kernel:
- Working camera (DRM-patch)
- Disabled dm-verity (so we can use magisk)
- Can mount /data in recovery (it means we can install magisk inside /data)
- Pass both safetynet
- You can still encrypt any time
You can download from attachment.
View attachment 4246515
It's not flashable zip, so please extract it before use.
View attachment 4246527
How to disable by yourself?
Prerequisite:
- 32-bit linux (you can use it on liveboot drive or VM)
It doesn't work on cygwin (windows) because of its native executable. So use linux 32 bit (i386), or 64 bit (amd64) with multiarch.
- Unpack using mkbootimg tool made by xiaolu (I tried kitchen and it won't work)
- Open fstab.qcom
- Replace "forceencrypet" with "encryptable"
- Pack again
- Done!
Thanks tobias.waldvogel and xiaolu for their awesome tools.
If you have any question, feel free to ask me or some nice guys here.
Click to expand...
Click to collapse
i'd just like to ask a question.. are we gonna be able to have the tap2wake feature back? or it's just not possible...
Thank you! Can you recover?
谢谢！超逼真可以恢复吗？
In what order to I flash recovery, root and the kernel? (I've never used a kernel before)
Great, but you can just flash twrp-3.0.2-0-kagura.img instead of a newer version and it will work perfectly. For some reason the newer twrps for xz will ask for password to decrypt data
And can you make this for g231?
tapperyaus said:
In what order to I flash recovery, root and the kernel? (I've never used a kernel before)
Click to expand...
Click to collapse
You have to unlock bootloader first before you can flash anything. Then just "fastboot flash boot <thatkernel>.img" in fastboot (blue LED). Recovery and root is optional. Normally, you have to use TWRP recovery to flash zip (su installer).
So, unlock bootloader -> flash kernel -> flash recovery -> install su in TWRP
Also, you can read detailed my tutorial here.
HellFish23 said:
Great, but you can just flash twrp-3.0.2-0-kagura.img instead of a newer version and it will work perfectly. For some reason the newer twrps for xz will ask for password to decrypt data
And can you make this for g231?
Click to expand...
Click to collapse
When you use 3.0.2-0, does it work while being encrypted? Or you have to do a factory reset to prevent further encryption.
Sure, I'll make for you guys when I'm free.
I've added G8231 kernel in the attachments.
zlRampageSlz said:
When you use 3.0.2-0, does it work while being encrypted? Or you have to do a factory reset to prevent further encryption.
Sure, I'll make for you guys when I'm free.
Click to expand...
Click to collapse
I understood the issue was twrp saying is encrypted while you didn't encrypt it yourself, may have misunderstood but I didn't test it while I actually encrypt it myself. And thanks!
Everything is working fine for the kernel, I no longer get the green photos and I can download Super Mario Run (my go to Safetynet app), but when I try to boot into recovery to flash Magisk all I get is a black screen. I tried flashing another TWRP version and still get a black screen. I'm on the dual sim variant.
Even if this problem can't be fixed, thanks for the kernel!
tapperyaus said:
Everything is working fine for the kernel, I no longer get the green photos and I can download Super Mario Run (my go to Safetynet app), but when I try to boot into recovery to flash Magisk all I get is a black screen. I tried flashing another TWRP version and still get a black screen. I'm on the dual sim variant.
Even if this problem can't be fixed, thanks for the kernel!
Click to expand...
Click to collapse
Could you give me TWRP log while installing magisk? Try using uninstaller and wiping cache first. Then flash stock kernel before install magisk again.
zlRampageSlz said:
Could you give me TWRP log while installing magisk? Try using uninstaller and wiping cache first. Then flash stock kernel before install magisk again.
Click to expand...
Click to collapse
The problem wasn't installing magisk, it was that TWRP wasn't installing correctly. Attempting to reach TWRP leads to a black screen. It's easily avoidable by booting the twrp.img through adb/fastboot (then flashing magisk there), I just can't install TWRP onto the phone.
tapperyaus said:
The problem wasn't installing magisk, it was that TWRP wasn't installing correctly. Attempting to reach TWRP leads to a black screen. It's easily avoidable by booting the twrp.img through adb/fastboot (then flashing magisk there), I just can't install TWRP onto the phone.
Click to expand...
Click to collapse
Sorry I misunderstood your question, TWRP right now cannot boot in the normal way (from fastboot/adb, or even TWRP itself). You have to hold power+vol down at the same time.
zlRampageSlz said:
Sorry I misunderstood your question, TWRP right now cannot boot in the normal way (from fastboot/adb, or even TWRP itself). You have to hold power+vol down at the same time.
Click to expand...
Click to collapse
Why can't i enter the TWRP by hold power+vol down at the same time? The screen just turned between black and logo.
Thanks.
I found the problem is that i forgot to flash recovery
Hi, Does this kernel support DoubleTap2Wake?
Ok
AWESOMEE..
Xenroe said:
Hi, Does this kernel support DoubleTap2Wake?
Click to expand...
Click to collapse
Not yet, I'll look around if I have some time.
zlRampageSlz said:
Not yet, I'll look around if I have some time.
Click to expand...
Click to collapse
Thanks, i would've flashed XZ Kernel just so i can have DoubleTap2Wake if i could.. I'll be looking forward to your update...
This kernel is good, but I have a question: When I brush the kernel, I can't enter TWRP through the combination of the volume key and the power button. Instead, my phone switch between the logo and the black screen. Do I need to write a TWRP again?(My English is not good, please fogive me:crying
WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Before you start it's important to make a backup of your data you don't wanna lose.
I only have experience with installing phh-treble with TWRP, so this manual will be for TWRP.
Downloads:
First you have to download the image of PHH Treble (arm64) (Check this post)
After download just unzip the file.
(To know which version you need you can use the app Treble Check, if both of these blocks are green you need the A/B image else you nee the only A image.
The Mi8 is an only A image, but if you wanna know for sure you can use the app. )
In the PHH Treble rom there are no Google Apps (Gapps), so if you want the play store and such other apps of google you have to download OpenGapps Unofficial
After download just keep the file as zip.
The overlay patch for fixing the notch you can find it in this post
It's important to be on the latest MIUI version, doesnt depend on Miui V9 or Miui V10, both will work.
Installing:
Step 1:
Be sure you got a backup of your data.
Step 2:
Reboot your phone in recovery.
Step 3:
Do a factory reset with TWRP. (Go to wipe and just swipe for a Factory Reset).
Step 4:
Transfer the system-arm64-aonly-vanilla-nosu.img, the OpenGapps.zip and the treble-overlay-xiaomi-mi8.apk to your internal storage.
Step 5:
Go to install, tap on Install Image and choose system-arm64-aonly-vanilla-nosu.img
Select the System Image partition to flash the image to and swipe to confirm flash.
Step 6:
If you want root just flash Magisk V16.7 now and reboot, without root only reboot needed.
Step 7:
When your phone is booted successfully just reboot into recovery.
Step 8:
If you want the Gapps, just flash them now.
Go to install, tap on install zip if it's not seeing any zip's yet.
Select the OpenGapps zip and flash it.
(It might happen the Setup Wizard keeps crashing! You can fix this by removing the SetupWizard.apk from /system/priv-app/SetupWizard. Use the file manager of TWRP)
Step 9:
To fix the notch of the Mi8 you have to copy the treble-overlay-xiaomi-mi8.apk to:
- /system/overlay
- /vendor/overlay
Step 10:
Reboot the phone and it is ready to be used!
If you installed Magisk you can install ViperFX 1.7 to fix the crappy sound.
If you still have any questions, just ask!
If I can improve this manual, just let me know
Big credits to:
- phhusson: PHH Treble Rom
- Nezorflame: OpenGapps
This one is for me!
Current bugs found:
- Hotspot (Bluetooth tethering works!)
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
can install face id in rom treble ?
Any bugs? What's about GPS and Wifi?
Ziarrr said:
can install face id in rom treble ?
Click to expand...
Click to collapse
Not working yet
0312Penner said:
Any bugs? What's about GPS and Wifi?
Click to expand...
Click to collapse
GPS and Wifi are perfect!
only bugs are:
- Hotspot
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
Can I go back to MIUI if I don't like it or are there problems with loading backups?
NielsvdS said:
Not working yet
Click to expand...
Click to collapse
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
xdamami said:
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
Click to expand...
Click to collapse
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
It is possbile! Maybe I will also create a guide for going back from a treble rom to MIUI.
First time when I tried the PHH-Treble rom the Wifi and Camera didn't work so I went back to MIUI.
For now I'm really satisfied!
I've tried LOS and PHH 8.1 but my gps doesnt want to work on either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finger print sensor is working fine and wifi. I've just had a problem with the playstore on LOS but that might just be the version of GApps they install as default
EDIT.
I've fixed GPS now as far as i can tell. After turning gps off and on a few times and a couple of other things its now working
How is the camera at the moment compared to MIUI?
_katho_ said:
How is the camera at the moment compared to MIUI?
Click to expand...
Click to collapse
It is crappy, WhatsApp is creating to much brightness, but the OpenCamera works well, pictures are ok, but far from the stock camera
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
PolariSz said:
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
Click to expand...
Click to collapse
Yeah! So nice.
I will take some time to create an custom rom for the Mi8 based on AOSP 9.0
NielsvdS said:
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
Click to expand...
Click to collapse
Ha Just one day))) there is a kernel source available)). What is your stage for kernel komple? will be good with Nethunter
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
moe.ze.chief said:
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
Click to expand...
Click to collapse
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
NielsvdS said:
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
Click to expand...
Click to collapse
Thanks!
Do you have a Link for the magisk module?
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
Just flash e.g. an xiaomi.eu Rom. There is a full installer and its no problem to go back to miui.
Factory reset and flash in TWRP
Its out in the wild now, check it out...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good day to all.
a few thoughts...
Let's start with the possibilities: the camera works after the upgrade(removed userdata.sin), I don't know how.
Here is another image of the details:
Here are few others:
That is all I have for now. Root is offline. Camera surprisingly works, again, I don't know how but it does.
have a nice one.
for G8341 when
dcrin3 said:
Root is offline. Camera surprisingly works, again, I don't know how but it does.
Click to expand...
Click to collapse
Does Magisk work with the firmware and did u unlock bootloader?
And both sims work?
dcrin3 said:
...That is all I have for now. Root is offline. Camera surprisingly works, again, I don't know how but it does...
Click to expand...
Click to collapse
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
lamtrinhan1503 said:
Does Magisk work with the firmware and did u unlock bootloader?
Click to expand...
Click to collapse
Delete post.
lamtrinhan1503 said:
Does Magisk work with the firmware and did u unlock bootloader?
Click to expand...
Click to collapse
Did not check on magisk but bootloader is unlocked.
pergoteborg said:
And both sims work?
Click to expand...
Click to collapse
Both Sims appear online but never tested calls or messages. If I get time, I'll check on it.
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
Click to expand...
Click to collapse
I'll will check on this later.
dcrin3 said:
I'll will check on this later.
Click to expand...
Click to collapse
Modpunks twrp-3.2.3-0-poplar-1.img does not decrypt the PIE relase, have to ADB Sideload
I wrote how I got PIE with Magisk at https://forum.xda-developers.com/showpost.php?p=78141162&postcount=160 in the Android 9 Pie comes to Sony Xperia XZ1 on October 26 thread
pergoteborg said:
Modpunks twrp-3.2.3-0-poplar-1.img does not decrypt the PIE relase, have to ADB Sideload
I wrote how I got PIE with Magisk at https://forum.xda-developers.com/showpost.php?p=78141162&postcount=160 in the Android 9 Pie comes to Sony Xperia XZ1 on October 26 thread
Click to expand...
Click to collapse
Both sims work for phone calls and sms.
I also like the dry erase swipe unlock, it leaves a minor trail behind instead of showing the entire trace. Not sure if that's a PIE upgrade or not.
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Click to expand...
Click to collapse
Playstore->Settings->"Device is not certified"
Your latest recovery9cryptfs15-1omni8-1 successfully decrypts Pie update using swipe.
modpunk's latest sees scrambled folders, taking down swipe and device protection does not help either, it's all still encrypted(scrambled).
Here are the shots:
Have a nice one.
it keeps on coming.
I've got full root after flashing latest Magisk via @oF2pks recovery.
Now it's almost a full daily driver.
I noticed Netflix was crashing but I've removed it via Settings->Apps->Force Stop then Uninstall.
Went back to PlayStore and reinstalled it and now Netflix works.
Here are the images:
Good day/night!
unbelievable!
I decided to flash G8342_Customized VN_1310-7041_47.2.A.0.306_R3C again, this time with userdata*.sin in place. No files removed.
** FULL ABSOLUTE WIPE **
** watch out for the broken links, not sure what happened but the images load up when links are clicked/touched **
Guess what? There is no need for drmfix, no green images either. HDR is there too, though I doubt its potential.
See for yourself:
Root works after flashing latest stable Magisk. Got Magisk.apk from the original thread here on xda @topjohnwu (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and downloaded a flashable.zip from within it, using @oF2pks latest pie-able recovery(https://androidfilehost.com/?fid=11410963190603845086) , I flashed it.
and then the final miscellaneous images before I restore to Oreo
Alright, now there's more information available from the last 3 posts.
Thanks to @oF2pks @topjohnwu @janjan @IgorEisberg @munjeni
Have a good one everyone!
I have it rooted with magisk too, installed the magisk selinux script that I had from 8.0 FIX/MOD THE Was.. I am not sure that is needed, but Apple music would not start.
As would some other apps.
The apple music I eventually fixes by going back to a version from apk mirror of begining this year... And block it from updating
Also had problems with firefox, had to go back to a version 61.0.2 from my titanium backup instead of the 63 version.
Maybe it has to do with the swift installer (theming), I am not sure, that one also works mostly.
N7 player was buggy from backup, New install did not find all my playlists, but restored again from backup and gebuild media library seems to have fixed it.
Gmail I had a problem with too, tried to remove it and get aan older version too, I am not sure of that did it
So there can be some app problems still
I had also error messages flashing the rom from flashtool, so it did not flash, but fixed it with copying and renaming the fsc file to 47.2.fsc made it work (and reinstalling flashtool but i think the fsc file was the solution)
The clock is on the left now, I hope someone finds a way to get it to the right again, or turn it off...
dcrin3 said:
There is no need for drmfix but camera is limited to 17MP, no green images either.
Click to expand...
Click to collapse
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
arslancn said:
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
Click to expand...
Click to collapse
4:3 19MP It works . It work very good.
I can not attach a picture.
arslancn said:
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
Click to expand...
Click to collapse
On the original shots it was an upgrade without wiping data.
On the later shots, the thread reads that I did a full wipe without drm fix so stock install defaulted to 17MP.
-------Dec 8------
I just noticed the 19MP. Sorry @arslancn
dcrin3 said:
On the original shots it was an upgrade without wiping data.
On the later shots, the thread reads that I did a full wipe without drm fix so stock install defaulted to 17MP.
Click to expand...
Click to collapse
Hi, can you share a step by step tutorial to install magisk on Android 9?
Like this thread?
https://forum.xda-developers.com/xperia-xz1/how-to/guide-how-to-persistant-root-xperia-xz1-t3718375
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
Click to expand...
Click to collapse
Will this recovery work for xz1 compact?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S23 Ultra S918B/S918N/S9180.
Download & Guide:
1. Unlock your bootloader.
2. Downloads for S23 Ultra: AFH: dm3q twrp
3. Reboot to download mode
4. Uncheck auto reboot in Odin and flash TWRP in AP slot and vbmeta_disabled_R.tar in USERDATA slot.
5. Hold volume down and power until the screen goes black then immediately switch to holding volume up and power to reboot into TWRP.
6. Go to wipe, format data, and type "yes" to confirm.
7. Reboot to TWRP
8. Flash boot_repack.zip (To fix stock recovery restoration)
9. Flash magisk canary (Optional)
10. Reboot to system, Enjoy.
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Decryption will only work if no password/PIN/pattern is set in Android.
- No erofs r/w support yet.
Thanks:
TWRP team
@BlackMesa123 for helping me to add encryption support
@dr.ketan for supporting meDonators
Sources:
Kernel tree
Device tree
Changelog:
GitHub History
mine
afaneh92 said:
Bugs:
- Encryption not fully working.
- No erofs r/w support yet.
Click to expand...
Click to collapse
Data decrypt support should be mandatory for this device expecially with the newer A13 EROFS partitions, please consider adding it.
BlackMesa123 said:
Data decrypt support should be mandatory for this device expecially with the newer A13 EROFS partitions, please consider adding it.
Click to expand...
Click to collapse
I tried on S20+ and S22 ultra it was harder than A series. But will try again when the device delivered, I may ask for your help. Thanks.
afaneh92 said:
I tried on S20+ and S22 ultra it was harder than A series. But will try again when the device delivered, I may ask for your help. Thanks.
Click to expand...
Click to collapse
Implementing crypto support is not that hard as it seems, in the S23 family it should even be easier since you can just implement the official TeamWin QSEE scripts in your device tree. I imagine the big deal on S20/S22 is due to those device having an Exynos SoC with TEEgris TZ, but even in that case it should be easy to handle. What I'm more afraid of is that this device probably has Knox SDP in vold so decrypt with PIN/password set won't work, but it's better than nothing atm.
BlackMesa123 said:
Implementing crypto support is not that hard as it seems, in the S23 family it should even be easier since you can just implement the official TeamWin QSEE scripts in your device tree. I imagine the big deal on S20/S22 is due to those device having an Exynos SoC with TEEgris TZ, but even in that case it should be easy to handle. What I'm more afraid of is that this device probably has Knox SDP in vold so decrypt with PIN/password set won't work, but it's better than nothing atm.
Click to expand...
Click to collapse
I was referring to snapdragon, and never worked. I used your implementation and device wasn't able to decrypt data. S22 was harder since data wasn't able to mount. I will wait for device, thanks again.
afaneh92 said:
I was referring to snapdragon, and never worked. I used your implementation and device wasn't able to decrypt data. S22 was harder since data wasn't able to mount. I will wait for device, thanks again.
Click to expand...
Click to collapse
We can surely work it out to fix it
@afaneh92 it looks like S23 vold has no crap A11 code leftovers which does break decrypt with PIN/password on TWRP, I compared the vold bin with my A52s' one and certain stuff is clearly missing. So it might just work out of the box once support for it gets added
BlackMesa123 said:
@afaneh92 it looks like S23 vold has no crap A11 code leftovers which does break decrypt with PIN/password on TWRP, I compared the vold bin with my A52s' one and certain stuff is clearly missing. So it might just work out of the box once support for it gets added
Click to expand...
Click to collapse
I hope so.
Nice work!
I followed the steps above, and when trying to reboot to system I get back to to twrp. Help please?
I just want to ask if anyone has tried installing viper4android yet and does it work? If it's like the s22 ultra and doesn't work. I might sound crazy but I wouldn't buy it. Music is more important to me then spen and camera although admittedly they are good to. It's mind blowing to think 1200 dollar won't sound as good as my Poco f3 or even my lg tribute 10 years ago.
lcd047 said:
I followed the steps above, and when trying to reboot to system I get back to to twrp. Help please?
Click to expand...
Click to collapse
I have exactly the same:
- after following all steps one by one there is only a reboot into TWRP itself possible
I compared the steps from this thread with the steps which are successfully working on my Galaxy Tab S8 Ultra ( https://forum.xda-developers.com/t/...-for-galaxy-tab-s8-series-snapdragon.4455491/ ) and I see a difference at step 7:
7. Flash custom kernel and magisk apk in twrp.
Click to expand...
Click to collapse
I do not see any "custom kernel" to download in this thread (at least for now) so I think this is the missing part. Or it only works correct in combination with "dr.ketans rom" (which I do not want to use for now).
@afaneh92: Thank you very much for your work (on "root" and also with "twrp")!
Edit: I just read the installation pdf from "dr. ketans rom". There is written in red letters:
DON'T run multidisabler from TWRP termial/zip or any system-rw script after flashing ROM else device won't boot.
Click to expand...
Click to collapse
So maybe the not booting system is related to the work which the "multidisabler" should do.
I will be happy if there will be some light regarding the non booting system after flashing TWRP.
Maybe I will give "dr. ketans rom" a try and have an eye on this thread how the things go on.
________________________________________
@Techguy777: This is very offtopic but I am with you that "Viper4Android" is a very important part also of my daily used tools. I just have found a (for me) good running workaround.
Search the fDroid store for the app "RootlessJamesDSP". Depending on which parts of "Viper4Android" you care about, the app is an extremely good working replacement. In my example, the "Convolver" with the impulse response files are important and that works wonderfully with the players I use.
hurray said:
I will go back for now to (rooted) stock ROM and Recovery and will have a look how this thread will go on.
Click to expand...
Click to collapse
Sadly flashing "dr.ketans rom" (or the "unroot" one, for that matter) doesn't fix the problem for me. Ironically everything was working fine with "dr.ketans rom" alone, but I just had to try disabling encryption. Well I suppose better is the enemy of good.
lcd047 said:
Sadly flashing "dr.ketans rom" (or the "unroot" one, for that matter) doesn't fix the problem for me. Ironically everything was working fine with "dr.ketans rom" alone, but I just had to try disabling encryption. Well I suppose better is the enemy of good.
Click to expand...
Click to collapse
I just flashed the orginal FW from samfw.com and my S23 Ultra is booting correctly into the system. Now I will try the current "S918B_WA6_DrKetan_ROM_T02". It seems that TWRP is build in into the ROM. If this works I will try a backup & restore of user data (this is the most important part from TWRP for me).
hurray said:
I just flashed the orginal FW from samfw.com and my S23 Ultra is booting correctly into the system. Now I will try the current "S918B_WA6_DrKetan_ROM_T02". It seems that TWRP is build in into the ROM. If this works I will try a backup & restore of user data (this is the most important part from TWRP for me).
Click to expand...
Click to collapse
After flashing my ROM + Format dara (Read changelog) TWRP backup/restore data should work as expected. And for that purpose mentioned in OP
dr.ketan said:
After flashing my ROM + Format dara (Read changelog) TWRP backup/restore data should work as expected. And for that purpose mentioned in OP
Click to expand...
Click to collapse
Yup, flashing the full ROM works. Many thanks, and keep up the amazing work!
dr.ketan said:
After flashing my ROM + Format dara (Read changelog) TWRP backup/restore data should work as expected. And for that purpose mentioned in OP
Click to expand...
Click to collapse
You have convinced me of your ROM. After flashing I had to reformat "data" but afterwards the system booted correctly.
The ROM works very well so far and the additional functions via "ROM Tools S23" are also good (especially that they can be selectively enabled and disabled).
Backup and recovery of user data has also worked flawlessly.
So now I can start with the actual setup of all apps.
Thanks a lot for your work!
hurray said:
You have convinced me of your ROM. After flashing I had to reformat "data" but afterwards the system booted correctly.
The ROM works very well so far and the additional functions via "ROM Tools S23" are also good (especially that they can be selectively enabled and disabled).
Backup and recovery of user data has also worked flawlessly.
So now I can start with the actual setup of all apps.
Thanks a lot for your work!
Click to expand...
Click to collapse
I have seen many users don't want "custom" roms, but my ROM will have complete stock look + single click all critical fix. It won't force users to use customised look. Also it have more options to make modifications in ui but everything will be by user's will.