WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Before you start it's important to make a backup of your data you don't wanna lose.
I only have experience with installing phh-treble with TWRP, so this manual will be for TWRP.
Downloads:
First you have to download the image of PHH Treble (arm64) (Check this post)
After download just unzip the file.
(To know which version you need you can use the app Treble Check, if both of these blocks are green you need the A/B image else you nee the only A image.
The Mi8 is an only A image, but if you wanna know for sure you can use the app. )
In the PHH Treble rom there are no Google Apps (Gapps), so if you want the play store and such other apps of google you have to download OpenGapps Unofficial
After download just keep the file as zip.
The overlay patch for fixing the notch you can find it in this post
It's important to be on the latest MIUI version, doesnt depend on Miui V9 or Miui V10, both will work.
Installing:
Step 1:
Be sure you got a backup of your data.
Step 2:
Reboot your phone in recovery.
Step 3:
Do a factory reset with TWRP. (Go to wipe and just swipe for a Factory Reset).
Step 4:
Transfer the system-arm64-aonly-vanilla-nosu.img, the OpenGapps.zip and the treble-overlay-xiaomi-mi8.apk to your internal storage.
Step 5:
Go to install, tap on Install Image and choose system-arm64-aonly-vanilla-nosu.img
Select the System Image partition to flash the image to and swipe to confirm flash.
Step 6:
If you want root just flash Magisk V16.7 now and reboot, without root only reboot needed.
Step 7:
When your phone is booted successfully just reboot into recovery.
Step 8:
If you want the Gapps, just flash them now.
Go to install, tap on install zip if it's not seeing any zip's yet.
Select the OpenGapps zip and flash it.
(It might happen the Setup Wizard keeps crashing! You can fix this by removing the SetupWizard.apk from /system/priv-app/SetupWizard. Use the file manager of TWRP)
Step 9:
To fix the notch of the Mi8 you have to copy the treble-overlay-xiaomi-mi8.apk to:
- /system/overlay
- /vendor/overlay
Step 10:
Reboot the phone and it is ready to be used!
If you installed Magisk you can install ViperFX 1.7 to fix the crappy sound.
If you still have any questions, just ask!
If I can improve this manual, just let me know
Big credits to:
- phhusson: PHH Treble Rom
- Nezorflame: OpenGapps
This one is for me!
Current bugs found:
- Hotspot (Bluetooth tethering works!)
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
can install face id in rom treble ?
Any bugs? What's about GPS and Wifi?
Ziarrr said:
can install face id in rom treble ?
Click to expand...
Click to collapse
Not working yet
0312Penner said:
Any bugs? What's about GPS and Wifi?
Click to expand...
Click to collapse
GPS and Wifi are perfect!
only bugs are:
- Hotspot
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
Can I go back to MIUI if I don't like it or are there problems with loading backups?
NielsvdS said:
Not working yet
Click to expand...
Click to collapse
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
xdamami said:
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
Click to expand...
Click to collapse
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
It is possbile! Maybe I will also create a guide for going back from a treble rom to MIUI.
First time when I tried the PHH-Treble rom the Wifi and Camera didn't work so I went back to MIUI.
For now I'm really satisfied!
I've tried LOS and PHH 8.1 but my gps doesnt want to work on either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finger print sensor is working fine and wifi. I've just had a problem with the playstore on LOS but that might just be the version of GApps they install as default
EDIT.
I've fixed GPS now as far as i can tell. After turning gps off and on a few times and a couple of other things its now working
How is the camera at the moment compared to MIUI?
_katho_ said:
How is the camera at the moment compared to MIUI?
Click to expand...
Click to collapse
It is crappy, WhatsApp is creating to much brightness, but the OpenCamera works well, pictures are ok, but far from the stock camera
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
PolariSz said:
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
Click to expand...
Click to collapse
Yeah! So nice.
I will take some time to create an custom rom for the Mi8 based on AOSP 9.0
NielsvdS said:
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
Click to expand...
Click to collapse
Ha Just one day))) there is a kernel source available)). What is your stage for kernel komple? will be good with Nethunter
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
moe.ze.chief said:
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
Click to expand...
Click to collapse
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
NielsvdS said:
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
Click to expand...
Click to collapse
Thanks!
Do you have a Link for the magisk module?
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
Just flash e.g. an xiaomi.eu Rom. There is a full installer and its no problem to go back to miui.
Factory reset and flash in TWRP
Related
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
As we all know - the tablet does not support treble. And we do not have a separate /vendor partition, i'm using /cache as /vendor.
Instructions
1. flash my twrp from link above - this is latest twrp with system_image support, it need to restore system treble images
2. download system image from https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Known Issues
1. rotate sensor working, but strange - on rotate tablet show black screen for a moment and then back to normal in right state
2. SM-T580 only: gps
Links
Treble images
SM-T585:
1. 20180827: initial treble: https://drive.google.com/file/d/1uX5JYqLCTMPpT5Zx2Wvi0U-Ms49S0YrW/view?usp=sharing
2. 20180904: camera recording in oreo images, both sdcards in pie images: https://drive.google.com/file/d/1cTEXJb9n5oZad0O3DXT5nlEhnlBDP6QB/view?usp=sharing
3, 20180906: remove shim for mediaserver - only for pie!!!: https://drive.google.com/file/d/1C0MfHt0SNYL4hD-BtOj3i7O_qBBPD25t/view?usp=sharing
SM-T580:
1. 20180828: initial treble: https://drive.google.com/file/d/1sgB1xQjRWyGM1OfF73Yhl5vRNunP04iK/view?usp=sharing
2. 20180904: camera recording in oreo images, both sdcards in pie images: https://drive.google.com/file/d/13WL9_Q_WoStf0WVHbmoYaL2CHbCluzNO/view?usp=sharing
3, 20180906: remove shim for mediaserver - only for pie!!!: https://drive.google.com/file/d/15dN2DugPBjhi_m0SOy4qYwVmR03nyY69/view?usp=sharing
Root
Use Magisk, it's should work. If during install Magisk give error about missed /vendor, run my prepare script and the install Magisk: https://drive.google.com/file/d/10JnOtyF5Y_4q1OE3FOZYPDcR7TK1jRhA/view?usp=sharing
GApps - Pie only!!!
Right now on T580\T585 pie images with gapps dnw, it's stuck on the start wizard, what is strange.
Solution: flash image without gapps and then flash gapps. It's working. I'm playing right now with aosp 9.0 and gapps.
We have 32bit recovery and right now standalone gapps think about arm and 6.0.1 version, what is wrong. I took gapps from https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141 and fix script inside to arm64 and right sdk version, this is gapps with my fix, what should work on T580\T585: https://drive.google.com/file/d/1kkHUPSznfibcER0DV89GhDdepEjqjCl9/view?usp=sharing
How install gapps:
1. install treble image, then pie system image
2. boot to system
3. restart to twrp and install gapps
4. boot to system, go to play market and login
For now working only this sequence
Recovery
SM-t585:
1. twrp-3.2.3-0: https://drive.google.com/file/d/16D-sFDt41n-wxNu1A0q01oRRKiZ-AsfF/view?usp=sharing
SM-T580:
1. this is original twrp (from https://dl.twrp.me/gtaxlwifi/twrp-3.2.3-0-gtaxlwifi.img.html), I just added system_image support and repack: https://drive.google.com/file/d/10LgZ1rabkgVSyIyd38BxIxNr22_9PJY5/view?usp=sharing
All firmware say about wrong vendor version. This is normal, just press OK.
System images:A only and 64Bits
Checked firmwares
Almost all oreo roms from treble's thread working.
Even new Android 9.0 Pie roms working, but it has issue with sdcard, it will require additional checks from me.
Installation
1. (optional): "Wipe\Format Data": type yes and press ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. wipe data: "Wipe\Advanced Wipe" and select "Dalvik/ARP Cache" / "Data" / "Internal Storage" / "System" / "Cache"
3. install treble: "Install", then navigate to lineage-15.1-20180827-treble.zip and "Swipe to confirm Flash"
4. install system: "Install", then press "Install Image" then navigate to system images, then select "System Image" and "Swipe to confirm Flash"
5. reboot
let's experiment together!
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
As we all know - the tablet does not support treble. And we do not have a separate /vendor partition, i'm using /cache as /vendor.
Instructions
1. go to the current twrp and full wipe
2. flash my twrp - this is latest twrp with system_image support, it need to restore system treble images (twrp-3.2.3-0-gtaxlltexx.img): https://drive.google.com/file/d/16D-sFDt41n-wxNu1A0q01oRRKiZ-AsfF/view?usp=sharing
3. flash zip with vendor data and boot image (lineage-15.1-20180827-treble.zip): https://drive.google.com/file/d/1uX5JYqLCTMPpT5Zx2Wvi0U-Ms49S0YrW/view?usp=sharing
4. now you device is ready to flash any treble system image from: https://forum.xda-developers.com/project-treble/trebleenabled-device-development - download img, copy to sdcard and then flash as system image in twrp
5. if you wanna check another rom, just make 1-4 again
Known Issues
1. video-recording
2. rotate sensor working, but strange - on rotate tablet show black screen for a moment and then back to normal in right state
All firmware say about wrong vendor version. This is normal, just press OK.
System A only
Checked firmwares
Almost all oreo roms from treble's thread working.
Even new Android 9.0 Pie roms working, but it has issue with sdcard, it will require additional checks from me.
let's experiment together!
Click to expand...
Click to collapse
You are amazing dude thanks so much for releasing this to us. Keep up the great work.
Wow, can you Do the same for the WiFi Version SM-T580?
This is by far the best news for our device. I am wondering if when we'll get official Oreo, Samsung will provide us with a treble rom as well.
Thanks Valera for you support.
I get "No OS installed"
Wow. Good job, my friend! I already want to try it on T580 wifi version. I remember that the roms of t585 work in the wifi version, can you flash this without problems?
Many cravings
Thank you!
paulo boë said:
I get "No OS installed"
Click to expand...
Click to collapse
just ignore this error. look like twrp not quite correctly handle the situation with restore via system_image and think that there is no system.
alanloax said:
Wow. Good job, my friend! I already want to try it on T580 wifi version. I remember that the roms of t585 work in the wifi version, can you flash this without problems?
Many cravings
Thank you!
Click to expand...
Click to collapse
I can build version for t580, the kernel and almost all stuff is not a problem, question only in the gps. In the t585 it's connect to the ril, but t580 using own gps chip. I don't know, where I can get 64bit binary for it. In case of t585 i'm using proprietary bin\libs from a5'17. Need to check, can I use 32bit gps in 64bit system.
And may be can be a problems (not sure now) - all treble's images created for phones. tablet with lte is close to phone, but not a witi version. but in any way - it's need to check.
Valera1978 said:
I can build version for t580, the kernel and almost all stuff is not a problem, question only in the gps. In the t585 it's connect to the ril, but t580 using own gps chip. I don't know, where I can get 64bit binary for it. In case of t585 i'm using proprietary bin\libs from a5'17. Need to check, can I use 32bit gps in 64bit system.
And may be can be a problems (not sure now) - all treble's images created for phones. tablet with lte is close to phone, but not a witi version. but in any way - it's need to check.
Click to expand...
Click to collapse
Oh I understand. Luckily I use little the gps. At least to try haha.
Thank you very much again for contributing to these devices, very good work!
Valera1978 said:
just ignore this error. look like twrp not quite correctly handle the situation with restore via system_image and think that there is no system.
Click to expand...
Click to collapse
And still it reboots over and over. The Galaxy Tab logo, then 6 7 secs black screen and the the Galaxy tab logo again.
paulo boë said:
And still it reboots over and over. The Galaxy Tab logo, then 6 7 secs black screen and the the Galaxy tab logo again.
Click to expand...
Click to collapse
Did you flashed anything other than rom? Magisk, gapps?
EugenStanis said:
Did you flashed anything other than rom? Magisk, gapps?
Click to expand...
Click to collapse
Nope, but I kinda forgot to mention that I use it on the T580
Hey, very good job. Please make a 580 version, GPS doesn't matter. You said it was experimental.
paulo boë said:
Nope, but I kinda forgot to mention that I use it on the T580
Click to expand...
Click to collapse
It's cannt work on T580 right now, because treble require changes in DTB. Without DTB changes system cann't mount /cache as /vendor and you will get boot before animation.
Will try build T580 today.
Please someone check version for T580
Valera1978 said:
Please someone check version for T580
Click to expand...
Click to collapse
And the twrp for t580? Cuz when I flash I get "this is for wifi this is lte"
Also can you post some screenshots with a link to the treble rom that works?
paulo boë said:
And the twrp for t580? Cuz when I flash I get "this is for wifi this is lte"
Click to expand...
Click to collapse
are your right now on twrp for lte? In this case in the gtaxlwifi-20180828-treble.zip - go to "\META-INF\com\google\android\updater-script" and remove first line with assert
Or you can use my twrp repack for t580: https://drive.google.com/file/d/10LgZ1rabkgVSyIyd38BxIxNr22_9PJY5/view?usp=sharing
this is original 3.23 version, I added only system-image
Valera1978 said:
are your right now on twrp for lte? In this case in the gtaxlwifi-20180828-treble.zip - go to "\META-INF\com\google\android\updater-script" and remove first line with assert
Or you can use my twrp repack for t580: https://drive.google.com/file/d/10LgZ1rabkgVSyIyd38BxIxNr22_9PJY5/view?usp=sharing
this is original 3.23 version, I added only system-image
Click to expand...
Click to collapse
I flashed it. Tried to flash a img, but still reboots back into galaxy logo
paulo boë said:
I flashed it. Tried to flash a img, but still reboots back into galaxy logo
Click to expand...
Click to collapse
can you send me /data/tombstones and /proc/last_kmsg?
SM-T285YD
Hi,
I have twrp for SM-T285YD but I cannot find any rom for my SM-T285YD. So can I flash this rom in my SM-T285YD.
If not then tell me what I need to do to get it working in my SM-T285YD and also I have the twrp but tell me how can make my twrp treble supported twrp....
Best regards....
Its out in the wild now, check it out...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good day to all.
a few thoughts...
Let's start with the possibilities: the camera works after the upgrade(removed userdata.sin), I don't know how.
Here is another image of the details:
Here are few others:
That is all I have for now. Root is offline. Camera surprisingly works, again, I don't know how but it does.
have a nice one.
for G8341 when
dcrin3 said:
Root is offline. Camera surprisingly works, again, I don't know how but it does.
Click to expand...
Click to collapse
Does Magisk work with the firmware and did u unlock bootloader?
And both sims work?
dcrin3 said:
...That is all I have for now. Root is offline. Camera surprisingly works, again, I don't know how but it does...
Click to expand...
Click to collapse
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
lamtrinhan1503 said:
Does Magisk work with the firmware and did u unlock bootloader?
Click to expand...
Click to collapse
Delete post.
lamtrinhan1503 said:
Does Magisk work with the firmware and did u unlock bootloader?
Click to expand...
Click to collapse
Did not check on magisk but bootloader is unlocked.
pergoteborg said:
And both sims work?
Click to expand...
Click to collapse
Both Sims appear online but never tested calls or messages. If I get time, I'll check on it.
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
Click to expand...
Click to collapse
I'll will check on this later.
dcrin3 said:
I'll will check on this later.
Click to expand...
Click to collapse
Modpunks twrp-3.2.3-0-poplar-1.img does not decrypt the PIE relase, have to ADB Sideload
I wrote how I got PIE with Magisk at https://forum.xda-developers.com/showpost.php?p=78141162&postcount=160 in the Android 9 Pie comes to Sony Xperia XZ1 on October 26 thread
pergoteborg said:
Modpunks twrp-3.2.3-0-poplar-1.img does not decrypt the PIE relase, have to ADB Sideload
I wrote how I got PIE with Magisk at https://forum.xda-developers.com/showpost.php?p=78141162&postcount=160 in the Android 9 Pie comes to Sony Xperia XZ1 on October 26 thread
Click to expand...
Click to collapse
Both sims work for phone calls and sms.
I also like the dry erase swipe unlock, it leaves a minor trail behind instead of showing the entire trace. Not sure if that's a PIE upgrade or not.
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Click to expand...
Click to collapse
Playstore->Settings->"Device is not certified"
Your latest recovery9cryptfs15-1omni8-1 successfully decrypts Pie update using swipe.
modpunk's latest sees scrambled folders, taking down swipe and device protection does not help either, it's all still encrypted(scrambled).
Here are the shots:
Have a nice one.
it keeps on coming.
I've got full root after flashing latest Magisk via @oF2pks recovery.
Now it's almost a full daily driver.
I noticed Netflix was crashing but I've removed it via Settings->Apps->Force Stop then Uninstall.
Went back to PlayStore and reinstalled it and now Netflix works.
Here are the images:
Good day/night!
unbelievable!
I decided to flash G8342_Customized VN_1310-7041_47.2.A.0.306_R3C again, this time with userdata*.sin in place. No files removed.
** FULL ABSOLUTE WIPE **
** watch out for the broken links, not sure what happened but the images load up when links are clicked/touched **
Guess what? There is no need for drmfix, no green images either. HDR is there too, though I doubt its potential.
See for yourself:
Root works after flashing latest stable Magisk. Got Magisk.apk from the original thread here on xda @topjohnwu (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and downloaded a flashable.zip from within it, using @oF2pks latest pie-able recovery(https://androidfilehost.com/?fid=11410963190603845086) , I flashed it.
and then the final miscellaneous images before I restore to Oreo
Alright, now there's more information available from the last 3 posts.
Thanks to @oF2pks @topjohnwu @janjan @IgorEisberg @munjeni
Have a good one everyone!
I have it rooted with magisk too, installed the magisk selinux script that I had from 8.0 FIX/MOD THE Was.. I am not sure that is needed, but Apple music would not start.
As would some other apps.
The apple music I eventually fixes by going back to a version from apk mirror of begining this year... And block it from updating
Also had problems with firefox, had to go back to a version 61.0.2 from my titanium backup instead of the 63 version.
Maybe it has to do with the swift installer (theming), I am not sure, that one also works mostly.
N7 player was buggy from backup, New install did not find all my playlists, but restored again from backup and gebuild media library seems to have fixed it.
Gmail I had a problem with too, tried to remove it and get aan older version too, I am not sure of that did it
So there can be some app problems still
I had also error messages flashing the rom from flashtool, so it did not flash, but fixed it with copying and renaming the fsc file to 47.2.fsc made it work (and reinstalling flashtool but i think the fsc file was the solution)
The clock is on the left now, I hope someone finds a way to get it to the right again, or turn it off...
dcrin3 said:
There is no need for drmfix but camera is limited to 17MP, no green images either.
Click to expand...
Click to collapse
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
arslancn said:
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
Click to expand...
Click to collapse
4:3 19MP It works . It work very good.
I can not attach a picture.
arslancn said:
19MP 4:3 is still here in your screenshots. Does it working fine? or only 17MP?
Click to expand...
Click to collapse
On the original shots it was an upgrade without wiping data.
On the later shots, the thread reads that I did a full wipe without drm fix so stock install defaulted to 17MP.
-------Dec 8------
I just noticed the 19MP. Sorry @arslancn
dcrin3 said:
On the original shots it was an upgrade without wiping data.
On the later shots, the thread reads that I did a full wipe without drm fix so stock install defaulted to 17MP.
Click to expand...
Click to collapse
Hi, can you share a step by step tutorial to install magisk on Android 9?
Like this thread?
https://forum.xda-developers.com/xperia-xz1/how-to/guide-how-to-persistant-root-xperia-xz1-t3718375
oF2pks said:
Can you tell if modpunk's twrp decrypts sdcard fine and backup /data ? If not, can you try without any password.
I've uploaded a xz1/twrp with latest August/Pie patches just in case https://androidfilehost.com/?fid=11410963190603845086
Good you have cam on without hack, bad is still 4.4 kernel (4.9 is out); twrp re-compiled with Pie /vendor may do the trick.
Also what about Playstore/Setting/Certified , Widevine level , SafetyNet... (you can try app in my signature below to get all specs of your device ...)
(EDIT tried latest @phhusson v107 Pie (on Oreo 8.0 /Vendor) and still logo bootloop)
Click to expand...
Click to collapse
Will this recovery work for xz1 compact?
MIUI 12! :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
Work on A520F?
Moddingexpert1988 said:
Work on A520F?
Click to expand...
Click to collapse
1. As far as I remember, A5 and A7 do not have treble/gsi support, yet. A quick look into forum, and you'll find treble ROMs only for A3.
2. Can't you read the title? It says that is for A320, so clearly it's not working on A520F.
XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
.7z extension? Should I flash the image in what should I do?
XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
Not working. I urge you to try yourself and then post. All i got was bootloop after removing that apk.
XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
@XiaomiFan2020
help me please!
A3 2017 + MIUI 12 = An iPhone 8-copy android phone
amyhopps10 said:
A3 2017 + MIUI 12 = An iPhone 8-copy android phone
Click to expand...
Click to collapse
Were you able to? Help me!
How to fix oversized Control Center?
XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
why do you share if you don't help? So I am angry with the Rom producers.
How to sideload Google Play?
This GSI doesn't come with google apps. Any working Google Play apps for this GSI?
amyhopps10 said:
This GSI doesn't come with google apps. Any working Google Play apps for this GSI?
Click to expand...
Click to collapse
Were you able to? If you did, show us too. PLEASE!
mehmettahaxcelik said:
Were you able to? If you did, show us too. PLEASE!
Click to expand...
Click to collapse
After giving it a lot of tries, I managed to get it working (more for fun than to make it a daily).
Basically if you follow the steps in the first posts (including the ones in the guide to flash GSI), you should manage to boot it. During the process, I encountered 2 issues:
- impossible to flash gapps : it gaves me error 70 but the repair or change file system did not fix it.
- once I got the GSI to boot, the screen was flickering. I flashed a fix found on @erfanGSIs telegram group.
Once properly set up, it is smooth and usable, HOWEVER the network is not stable & the device ran incredibly hot, even at idle. I uninstalled it and went back to lineage.
The phone does not stay connected more than 2 sec on the mobile network before loosing the connection. Connection comes back after 2 sec and disconnect again... etc...
According to online search, It seems that it is possible to install google play services directly through the beta.
Good luck
Tibodallas said:
After giving it a lot of tries, I managed to get it working (more for fun than to make it a daily).
Basically if you follow the steps in the first posts (including the ones in the guide to flash GSI), you should manage to boot it. During the process, I encountered 2 issues:
- impossible to flash gapps : it gaves me error 70 but the repair or change file system did not fix it.
- once I got the GSI to boot, the screen was flickering. I flashed a fix found on @erfanGSIs telegram group.
Once properly set up, it is smooth and usable, HOWEVER The device ran incredibly hot, even at idle. I uninstalled it and went back to lineage.
According to online search, It seems that it is possible to install google play services directly through the beta.
Good luck
Click to expand...
Click to collapse
How do I fix the phone locks itself when I insert the SIM CARD?
It looks like a nice system that should come up with a new update urgently, but we cannot experience it because we have not passed the installation.
Tip: to fix AOD use:
https://drive.google.com/open?id=1DoxnT9362juQKvFlBbNOKBtsPSEUNS5D
Will there be a new update for this project? It is a good project and there are some problems.It detects the SIM card partially, only 2 to 3 seconds. It is urgently necessary to troubleshoot such problems. Or is there anyone who can solve such problems?
Now answer the question I will ask you. Why are the developers trying to do this job if they don't fix our problems.
Does this rom support the project with the link below?
https://forum.xda-developers.com/samsung-a-series-2017/development/treble-h-vendor-v1-0-t4116271
Thank you in advance for the answer.
Can I install this on a520f?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
reboot
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Niiiiice!!! I will try it ?
It Is Android 10?? You have some screenshot??
Does the fingerprint under the display work with this ROM?
Honzule89 said:
It Is Android 10?? You have some screenshot??
Click to expand...
Click to collapse
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Honzule89 said:
Does the fingerprint under the display work with this ROM?
Click to expand...
Click to collapse
Unlocking by fingerprint is implemented for scanners on the back of the phone.
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity. I will not install this ROM. But still great work
Honzule89 said:
Moto Zoom has a fingerprint under the display, which means that this reader will be inoperative and the phone can only be unlocked with a gesture or pin. It is a great pity.
Click to expand...
Click to collapse
This is GSI. This is a basic image of the firmware, not for a concrete model. Are you ready to donate for Moto Oe Zoom specific firmware development?
Honzule89 said:
I will not install this ROM.
Click to expand...
Click to collapse
The choice is yours. No one is forcing anyone. It's just that up until now it hasn't been possible to get a working system on Android 10.
After the flashes I get this:
Failed to mount '/system's (Invalid argument)
After I unpack the image zip, I rename to .img, maybe that's why, help me please...
ilia3367 said:
Yes, it's Android 10.
No screenshots. It's like Andriod 10.
Click to expand...
Click to collapse
You're truly incredible, thank-you SOOOOOO much for your work. :laugh:
It's amazing that unofficial development is an entire OS version better than OEM work! :good:
Hi,
nice job....i would donate for development....fix bluetooth?
giar72 said:
....fix bluetooth?
Click to expand...
Click to collapse
I tried to fix it, but I couldn't...
sorry...
Hell yeah, nice work. Probably not going to install it since I rely on Google pay and Bluetooth headphones regularly, but it's nice to finally see some roms for this device.
problem help please
ilia3367 said:
- = Treble Zoom = -
This custom ROM based on Havoc-OS 3.5.
Prerequisites - bootloader must be unlocked, clean Stock firmware and TWRP must be installed.
What's done:
- integrated GAPPS (Play Market, Chrome, Google Dialer, Messages, Contacts, etc.), but nothing extra. YouTube has been removed because I use YouTube Vanced);
- installed Nova Launcher (I recommend using it as the main one), RootExplorer, Asus File Manager (for simple tasks), Asus Gallery, AdAway ads blocker, Motor Command Center 2;
- integrated Moto camera from the latest firmware draining. Fully working with the work of all camera modules! In addition the best, in my opinion, for this ROM and our phone Google Camera mod;
- working Adaptive Brightness;
- cleaned up and made the system a little bit easier.
Installation Instruction
1. Download the Project Treble system image archive. Unpack the archive and copy the ROM image to an external SDCard.
2. Copy to external SD Card Magisk Installer https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4), Disable_Dm-Verity_ForceEncrypt https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip ) and Permissiver_v4 (see attachments)
3. Reboot in TWRP and go to the "Wipe" tab, "Advanced Wipe" and select Dalvik, System, Data, and then go back two steps back and do a "Swipe Factory reset".
4. Install the Treble Zoom system image. In the "Install" tab in the lower right corner click "Install image" and select ROM Image. A window will open in which you should select partition "System Image" in which the image where to be installed. Swipe for confirm flash.
5. When the installation is complete, go to "Wipe" and perform a "Format Data".
6. Install the Magisk.zip, Disable_Dm-V_ForceEncrypt.zip and Permissiver_v4.zip. Reboot into the system and make the settings, use the Project Treble working system.
The first launch will be a bit long, don't worry and be happy!
Noticed problems on Treble Zoom - Does not pass SafetyNet check (ctsProfile: false; basicIntegrity: true). On Google Play, your device is not certified, but applications are installed and updated. Wired headphones are plugged in. When connected, the Bluetooth headset in the Dialer application works, but when listening to audio, video, YouTube is not.
Fingerprint Unlocking by fingerprint is implemented for scanners on the back of the phone. This problem can be corrected in the following way:
Connect the device to your PC and enter the following commands
Code:
adb shell
su
setprop persist.sys.fp.fod.location.X_Y 450,1760
setprop persist.sys.fp.fod.size.width_height 194,194
A green circle will appear in the display of your device, which is responsible for your fingerprint.
Click to expand...
Click to collapse
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
forgot to mention
death1426 said:
so i tried to install the rom everything wwent well untill it kept booting to twrp then installed again and now it wont boot at all when plugged in it only lights up the moto sign on the back what can i do?
Click to expand...
Click to collapse
i think i accidentally hit boot on slot b on twrp if so how can i fix this if it wont boot into bootloader?
To load into slot A, execute the command:
fastboot --set-active=a
Does it still has the moto shortcuts? Like alsways on display and the flashlight gesture?
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
thirdphotographer said:
There is a 3.8 version in the Havoc-os 3.5 link, can I flash it on One Zoom?...
Click to expand...
Click to collapse
This ROM is not the original GSI Havoc-OS image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Build with Gapps Download
Mirror
Vanilla Build Download
Mirror
New Recoveries
New TWRP Download
Donate
Cool-custom-bootlogos
Chagelog:
• Replaced snap camera with Gcam-Go
• Added both Gapps and Vanilla builds
• June patch
• Removed Blur effect that cause glitches in the launcher
SafetyNet can be fixed without root
Notice, you have to flash the BiTGApps-safetynet-patch even if you install the build with Gapps
just flash the rom and the BiTGApps-safetynet-patch together and you are all set.
For the vanila Build you have to flash latest BitGApps plus the BiTGApps-safetynet-patch
steps fo vanilla only:
1. download the Rom, BitGapps, and BiTGApps-safetynet-patch and place them in your external sd-card.
2. flash the Rom then flash BitGApps and finaly flash
BiTGApps-safetynet-patch wipe caches and reboot system.
BitGapps
BiTGApps-safetynet-patch
Credits:
• @jeangraff30 For the source and much more
• All the people who helped me test
By @Broly
Follow @MotoG6update
Works pretty well on my device. For some reason it wouldnt boot at first so I flashed a second time and got it to boot.
Few things though: Fingerprint Navigation works, but does not hide the navbar. There are apps that can hide the navbar without root, but the method they use does not work on android 11. Only option to hide your navbar is to root.
Thank you so much for this firmware ! Everything works very fast and stable ,if there was a way to support the moto camera as it is in the Pixel Experience 10, then this would be the best option !
dimoksa777 said:
Thank you so much for this firmware ! Everything works very fast and stable ,if there was a way to support the moto camera as it is in the Pixel Experience 10, then this would be the best option !
Click to expand...
Click to collapse
I'm waiting for nemesis team to release the camera source code but no ETA
there is many problems with the rom. lags with interface, apps. Not stable rom at all
Rassamah said:
there is many problems with the rom. lags with interface, apps. Not stable rom at all
Click to expand...
Click to collapse
I had no lag problems with this rom, did you use any third party launcher?
Rassamah said:
there is many problems with the rom. lags with interface, apps. Not stable rom at all
Click to expand...
Click to collapse
Sorry there is confuse. I mixed up theme
SafetyNet can be fixed without root using BitGapps
it has to be clean install.
Notice, you have to reboot to recovery before flashing BitGapps
steps:
1. download the Rom and BitGapps and place them in your external sd-card.
2. flash the Rom then reboot to recovery then flash BitGapps
BitGapps
I really like android and again have bootloop, linux/arm/java best stability and quality.... XT1925-5
Broly said:
SafetyNet can be fixed without root using BitGapps
it has to be clean install.
Notice, you have to reboot to recovery before flashing BitGapps
steps:
1. download the Rom and BitGapps and place them in your external sd-card.
2. flash the Rom then reboot to recovery then flash BitGapps
BitGapps
Click to expand...
Click to collapse
Installation aborted, os detected...
i found solution for bootloop, data and cache partitons only works with ext4 in 2021.... but RROS on 10 not have this problem... PLEASE, write about it in first post.. And rom need password to start... WHY
Hi all,
I am loving this ROM, I came over from pixelexp as I was having problems with WiFi calling (provisioning I think,-- had no VoLTE or video calling provisioned ). I have an XT1925-6 on Verizon and not having any issues at all except an occasional reboot. I would be happy to post anything that might help with that, just let me know.
Thanks!
profilelikelihood said:
Hi all,
I am loving this ROM, I came over from pixelexp as I was having problems with WiFi calling (provisioning I think,-- had no VoLTE or video calling provisioned ). I have an XT1925-6 on Verizon and not having any issues at all except an occasional reboot. I would be happy to post anything that might help with that, just let me know.
Thanks!
Click to expand...
Click to collapse
I have same model, did you root it and install some modules and what gapps are you using?
Broly said:
I have same model, did you root it and install some modules and what gapps are you using?
Click to expand...
Click to collapse
I did not root, I was able to do a dirty flash and flashed NikGapps basic. I had to reinstall a few google apps but then they were fine and settings remained. Running quite well aside this one issue, which could possibly be fixed by a clean install.
ironwolf115 said:
i found solution for bootloop, data and cache partitons only works with ext4 in 2021.... but RROS on 10 not have this problem... PLEASE, write about it in first post.. And rom need password to start... WHY
Click to expand...
Click to collapse
I have no Idea what you are talking about, I have no issues installing it.
Broly said:
I have no Idea what you are talking about, I have no issues installing it.
Click to expand...
Click to collapse
Just write on first post about need format after flash and f2fs not supported on cache partition.
ironwolf115 said:
Just write on first post about need format after flash and f2fs not supported on cache partition.
Click to expand...
Click to collapse
You don't need to format after flash, you format before wiping everything like the video show, also I don't know why you need f2fs support on cache, seems like you are having issues with twrp and I`m not the twrp dev and have no issues with it either
Broly said:
You don't need to format after flash, you format before wiping everything like the video show, also I don't know why you need f2fs support on cache, seems like you are having issues with twrp and I`m not the twrp dev and have no issues with it either
Click to expand...
Click to collapse
Why are you all so stubborn just, I wrote to you to point it in the hat to avoid problems in other people in this regard. But no, for some reason you provoke a dispute without foundation as such. Please just write in the bugs that f2fs is causing a bootloop on the cache section. And on why I need it, because with f2fs much more responsive works, than with outdated ext4, but in general on me it would be time to put ntfs everywhere. And no, I don't use telegram because I just don't need it. A bootloop can happen very simply if on the same phone before this crapdroid version 10 stood with f2fs sections. And it just turns out that the person will not even understand what the problems, as I have been here myself with this for several months.
ironwolf115 said:
Why are you all so stubborn just, I wrote to you to point it in the hat to avoid problems in other people in this regard. But no, for some reason you provoke a dispute without foundation as such. Please just write in the bugs that f2fs is causing a bootloop on the cache section. And on why I need it, because with f2fs much more responsive works, than with outdated ext4, but in general on me it would be time to put ntfs everywhere. And no, I don't use telegram because I just don't need it. A bootloop can happen very simply if on the same phone before this crapdroid version 10 stood with f2fs sections. And it just turns out that the person will not even understand what the problems, as I have been here myself with this for several months.
Click to expand...
Click to collapse
I wasn't disputing anything with you, just trying to help you, I'm not changing anything in the original post as your problem has nothing to do with the rom and you seem to be the only person with this problem if someone have the same issue as you they can read your comments, also you can open your own post somewhere else to complain about file systems or whatever, but please if you don't need help stop posting comments here.