[A320FL/F/Y] MIUI 12 Working on Galaxy A3 2017 - Samsung Galaxy A3, A5, A7 (2017) Guides, News, & D

MIUI 12! :fingers-crossed:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable

XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
Work on A520F?

Moddingexpert1988 said:
Work on A520F?
Click to expand...
Click to collapse
1. As far as I remember, A5 and A7 do not have treble/gsi support, yet. A quick look into forum, and you'll find treble ROMs only for A3.
2. Can't you read the title? It says that is for A320, so clearly it's not working on A520F.

XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
.7z extension? Should I flash the image in what should I do?

XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
Not working. I urge you to try yourself and then post. All i got was bootloop after removing that apk.

XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
@XiaomiFan2020
help me please!

A3 2017 + MIUI 12 = An iPhone 8-copy android phone

amyhopps10 said:
A3 2017 + MIUI 12 = An iPhone 8-copy android phone
Click to expand...
Click to collapse
Were you able to? Help me!

How to fix oversized Control Center?

XiaomiFan2020 said:
MIUI 12! :fingers-crossed:
Someone on discord sent the image and I messaged them to ask how they did it:
1) Download the GSI from here: https://mega.nz/file/wKgXELbD#ufrVZVquNQGV3U4zfRiLXhcJpiV54L22qx_N1UbY_8k
2) Use this guide to flash the GSI (All thanks to Astrako) :good:
3) Remove provision.apk from system/priv_app/provision
4) Boot into MIUI and set display size to small
Bugs:
Action center is slightly oversized
No AOD
Other than that it is very stable
Click to expand...
Click to collapse
why do you share if you don't help? So I am angry with the Rom producers.

How to sideload Google Play?
This GSI doesn't come with google apps. Any working Google Play apps for this GSI?

amyhopps10 said:
This GSI doesn't come with google apps. Any working Google Play apps for this GSI?
Click to expand...
Click to collapse
Were you able to? If you did, show us too. PLEASE!

mehmettahaxcelik said:
Were you able to? If you did, show us too. PLEASE!
Click to expand...
Click to collapse
After giving it a lot of tries, I managed to get it working (more for fun than to make it a daily).
Basically if you follow the steps in the first posts (including the ones in the guide to flash GSI), you should manage to boot it. During the process, I encountered 2 issues:
- impossible to flash gapps : it gaves me error 70 but the repair or change file system did not fix it.
- once I got the GSI to boot, the screen was flickering. I flashed a fix found on @erfanGSIs telegram group.
Once properly set up, it is smooth and usable, HOWEVER the network is not stable & the device ran incredibly hot, even at idle. I uninstalled it and went back to lineage.
The phone does not stay connected more than 2 sec on the mobile network before loosing the connection. Connection comes back after 2 sec and disconnect again... etc...
According to online search, It seems that it is possible to install google play services directly through the beta.
Good luck

Tibodallas said:
After giving it a lot of tries, I managed to get it working (more for fun than to make it a daily).
Basically if you follow the steps in the first posts (including the ones in the guide to flash GSI), you should manage to boot it. During the process, I encountered 2 issues:
- impossible to flash gapps : it gaves me error 70 but the repair or change file system did not fix it.
- once I got the GSI to boot, the screen was flickering. I flashed a fix found on @erfanGSIs telegram group.
Once properly set up, it is smooth and usable, HOWEVER The device ran incredibly hot, even at idle. I uninstalled it and went back to lineage.
According to online search, It seems that it is possible to install google play services directly through the beta.
Good luck
Click to expand...
Click to collapse
How do I fix the phone locks itself when I insert the SIM CARD?

It looks like a nice system that should come up with a new update urgently, but we cannot experience it because we have not passed the installation.

Tip: to fix AOD use:
https://drive.google.com/open?id=1DoxnT9362juQKvFlBbNOKBtsPSEUNS5D

Will there be a new update for this project? It is a good project and there are some problems.It detects the SIM card partially, only 2 to 3 seconds. It is urgently necessary to troubleshoot such problems. Or is there anyone who can solve such problems?

Now answer the question I will ask you. Why are the developers trying to do this job if they don't fix our problems.

Does this rom support the project with the link below?
https://forum.xda-developers.com/samsung-a-series-2017/development/treble-h-vendor-v1-0-t4116271
Thank you in advance for the answer.

Can I install this on a520f?

Related

[Rom] [MM] [LG G2] MIUI 8 for all variant (D80x/ls980/vs980)

Update: Rom link is down so see the original author's thread for latest update and info
Here
MIUI Rom has been ported for LG G2 and all variants are supported. It is not ported by me and, I have no connection with any of the dev, I am just spreading the news. If developers don't like it that, I will remove this thread. So just take it as a news.
Source:
Here is the true origin of Rom --> Here/
Info:
As it is MIUI 8 so it is based upon Android Marshmallow version 6.0.1. So you can expect many new features.
Google play services and play store are included in this rom, So no need to flash any gapps.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link(s):
1: Rom
Mirror: Mega
2: Kernel (For better performance).
3: Supersu
4: SupersuFix
Sound fix: (Thanks to zg85).
For those having no sound issue, Try flashing this modem. (Currently for D802 only. Searching for other variants fix. If anyone have other please tell.).
Here.
Important:
For those with device running Lollipop or other bootloader than Kitkat you can follow this thread to change bootloader to kitkat.
Here.
And
For baseband, You can check this out. (I have not tested any yet, But please tell me if this can solve issues).
Here.
Instructions:
1: Boot into TWRP.
2: Make full wipes. (Leaving internal storage).
3: Flash the rom zip. Select your model. Wait till finished. Don't reboot into system.
4: Flash the kernel after rom installation is completed.
(You need to be at kitkat bootloader and also required baseband of kitkat model for sim to work. So make sure you have all these things
5: Flash supersufix then supersu to get root.
First boot takes some time, So wait at least 15 to 20 minutes for first time.
Disclaimer:
I'm not developers of this rom and any other thing related and mentioned here. So don't complain about any thing. You can ask for help and I will try to help (If i can). But I'm not responsible for any damage to your device or any other things.
Thanks in advance for not complaining me.
Press Thanks button if, I helped you.
Thanks to:
@Cloudyfa for basebands.
XDAVN team for origin of this rom.
Any one other who did any thing for this rom/thread, directly or indirectly.
Most Important:
It's look like that the original developer has created his thread for this rom. So All can find latest fixes and support there.
Here is the Link
http://forum.xda-developers.com/lg-g2/development/mm-miui8-lg-g2-t3502836
Hello, i flashed the rom via TWRP with following the instructions, it has been like 40 minutes and it still not booted. Any idea?
Screen is like:
Fastboot mode started
reset
portcharge
reset
portcharge
STALL GET_DESCRIPTOR 128 6 1006 0 255
fastboot: processing commands
Edit: It was my fault, this rom has to be flashed on a kitkat rom, i was on a lollipop rom.
faceliler said:
Hello, i flashed the rom via TWRP with following the instructions, it has been like 40 minutes and it still not booted. Any idea?
Screen is like:
Fastboot mode started
reset
portcharge
reset
portcharge
STALL GET_DESCRIPTOR 128 6 1006 0 255
fastboot: processing commands
Edit: It was my fault, this rom has to be flashed on a kitkat rom, i was on a lollipop rom.
Click to expand...
Click to collapse
flash KK.bootloader for your phone model
Is google play service included in this ROM? Thank you.
jim380 said:
Is google play service included in this ROM? Thank you.
Click to expand...
Click to collapse
yes included
Pattern lock and Applock is not working
After one day, i can say that there is some bugs, but they are not that big, sometimes its freezing and sometimes its restarting whole system in random moments, also this is not that smooth like AOSP or miui v7 for lg g2, camera is working well, but in my opinion it's slow, movies on snap doesent work (recording, u can record but after this u will see static image). But, other things are good, i'll use it and wait for updates. Hope OTA is working (Sorry for my bad english, if u didnt understand me, i will try to explain it better just pm me)
Will this thread be updated/maintained?
Flashed the ROM and it looks great
But there are some problems.
Sound doesn't work and I can't call either.
Compass doesn't work. AppLock won't work. So as pattern lock.
Any solution for call and sound problem?
Pls help. I love this ROM
No sound is playing... Any patch for it
Southleader said:
Flashed the ROM and it looks great
But there are some problems.
Sound doesn't work and I can't call either.
Compass doesn't work. AppLock won't work. So as pattern lock.
Any solution for call and sound problem?
Pls help. I love this ROM
Click to expand...
Click to collapse
flash modem
aixabdennour said:
flash modem
Click to expand...
Click to collapse
Where can I find the modem?
Could you pls give me a link??
I'm on D805 variant
Southleader said:
Where can I find the modem?
Could you pls give me a link??
I'm on D805 variant
Click to expand...
Click to collapse
https://github.com/danielstuart14/hybrid_caf_bootstacks/tree/LG-CAF/d805-6
aixabdennour said:
what is your phone model!!
Click to expand...
Click to collapse
[deleted post]
jim380 said:
Will this thread be updated/maintained?
Click to expand...
Click to collapse
Yeah, I am here, trying my best to keep this thread updated all new informations. If you or anyone find an info to tell, then I will update it.
Does it really have OTA updates or not?
It really needs to be updated there are so many bugs which need to be fixed
Ai giúp minh vơi bật 3G nhưng sao lại chay tôc đô 2G. Cũng k chon được mang 2G
I followed all instructions here flash rom bootloader modem but when i finished didnt work every time reboot to recovery
Also i flashed kernel but fail
I do not know where is the problem
Aures Batna said:
I followed all instructions here flash rom bootloader modem but when i finished didnt work every time reboot to recovery
Also i flashed kernel but fail
I do not know where is the problem
Click to expand...
Click to collapse
Which variant you are using?
dksoni411 said:
Which variant you are using?
Click to expand...
Click to collapse
Ls980

Flyme7.8.7R For the Leeco X720 and X727

(7.1) Flyme7. Fingerprint infrared V3 For the Leeco X720 and X727 ( Updated on 9/5/2018 )
AKA: The newest version of Flyme Original Chinese Name : 7to-X720.flyme7.指纹红外V3.zip
Developer: Cold and Ruthless
Original Link: http://rom.7to.cn/romdetail/1030273
Link: https://mega.nz/#F!xYJgXYxK
Key: !QNUTt-aMXA-Kvl39hOMp9A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme:
LeTV pro3 transplant Flyme7.8.21R V3
Redesigned interface, better overall experience
Advanced settings root card brush package
Optimized sound
Author: Cold ruthless
Release Date: 2018-09-04
Android version: 7.1.x
UI type: Flyme ROM
Size: 1270.00MB
Experience the new interface, with advanced settings, high speed, theming options, and excellent call and sound quality, all are hallmarks of the Meizu Official Experience
Applicable models: LeEco LEX720, LEX727
Optimization of the optimized
volume of the bottom package update sound.
Temperature control based on port from: Charm Blue Note 6 Build
Double Wipe> reboot to Recovery, if you have an error you may need to format storage
The first boot is very slow, please wait for the Meizu official latest experience version transplant
Past Bluetooth issue resolved.
Optimization scheduling
New interface new experience, advanced settings and optimization
Installation Notes:
First Boot may be slow, so if it takes a while for the first system boot, the solution is just to wait longer.
Flyme Account http://forum.flymeos.com/
Create an Official Flyme account if you want to gain access to tons of addons.
Meizu is Port friendly and Flyme Account Provides:
Forum advice
Plugins,
Apps,
3rd party themes etc.
Download Flyme 7 Launcher, Stock Wallpapers, and Apps (Flyme 7 stock APK)
https://www.androidsage.com/2018/05/15/download-flyme-7-launcher-stock-wallpapers-apps-apk/
As always, flash anything under your own discretion
Root
This Rom comes with Magisk root, You can easily flash Magisk 17.1 overtop after setting up the system and then rebooting to recovery.
Gapps: I am using BeansGapps-Mini-7.1.x-20170725.zip
Helpful files:
https://mega.nz/#F!JMYSSCLQ
Key: !xgQFTB69PE-hL8RTUbpUIw
Firmware
https://mega.nz/#F!oAZ3yC4b!
Key: MDwbHXNTRdrpgMvQ42yviw
If you have safetynet issues, follow the steps below
Extract the boot.img file from the rom, and placed the boot image into storage.
Open Magisk and use install to Patch Magisk to the boot.img.
Reboot to recovery, install the patched boot.img to boot
Flash addonsu-15.1-arm-signed.zip, and then reflash Magisk again, from storage then use advanced options to clear cache, and then reboot to system.
With these steps you will always Pass Safetynet and be playstore certified
https://forum.xda-developers.com/showpost.php?p=77367331&postcount=4790
Build Prop Recommendations
After the installation and initial testing period,. you may decide to continuing using Flyme for a while:
If so you can further optimise the ROM with these build prop and edits posted below.
First backup your existing buildprop
* ro.product.locale.language = en ( or your language)
* ro.product.locale.region = IN or your country
* persist.sys.timezone = your country ( see proper entry here: https://gist.github.com/arpit/1035596)
* persist.sys.meizu.region =
or use persist.sys.oem.region= your country google correct acronym for your country
Reserved for future hints
Thanks I will try and feedback
i get error code 3 when i try to flash
rob_z11 said:
i get error code 3 when i try to flash
Click to expand...
Click to collapse
Me Too!
Yes, I tried it and the same thing happened to me, it must be a corrupt download because people are giving the release a 8.3/10. I found a slightly older but highly rated rogue pig version. ( see same link above)
I installed it successfully and must say, it's actually extremely good.
Corruption
The original newer file is probably just corrupted so I am going to try redownloading it. Until then, check out the other version that I placed in the same megadrive folder see the link above. Yes, it's a little older but its actually awesome!
I just attempted to find the newer rom by cold ruthless on the BBS website, has he been banned. I had a bookmark saved and when I click I get this message " Authors are banned or deleted automatically blocked" Not sure if its the same person or not, if this next download is corrupt. I would still recommend flyme_LEX720_rogue_6.8.3.17R-beta, I am testing it right now and like it alot.
Does Android Pay work with this ROM?
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
It looks like what happened to me when going from an Oreo rom to Nougat, you have to format data not only wipe data. Format data, write "yes" and then install the rom. Always have a backup of your data before.
flyme is one of the best system , the official one is good but it's old , be sure to have eui firmware before flashing flyme .
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Please can you put the link of old recovery version
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Did you format internal storage?
3llawi said:
Did you format internal storage?
Click to expand...
Click to collapse
No because I have always been on miui10
can some1 link me the gapps?
collisiion said:
can some1 link me the gapps?
Click to expand...
Click to collapse
Look at the post #1
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
andrew2401 said:
Does Android Pay work with this ROM?
Click to expand...
Click to collapse
I believe so, though I haven't tried it yet. I will let you know late tonight
tsongming said:
I believe so, though I haven't tried it yet. I will let you know late tonight
Click to expand...
Click to collapse
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
tsongming said:
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
Click to expand...
Click to collapse
Ok, this is what I have found. Your original latest flyme seems to be working ok. Here is what I have done. Using RAR apk, I unzipped it, and it complained about one apk in mizu-apk folder, and I ended up removing that folder completely, and zipped the ROM again. It flashed without any issue, but I can't seem to get Data to turn-on. It turns on briefly during the boot, but it goes away. I think if I compare the build.prop from older version with newer version, I may be able to find the fix.
andrew2401 said:
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
Click to expand...
Click to collapse
Extremely good, at the moment my phone has no OS at all..
I only glanced at battery life briefly yesterday with Gsam battery tool. Plus, I installed BlackScreen 5.3 r2 which worked fine, I would rather wait for a real answer. Otherwise it would just be a guess.

[Treble ROM] How to install PHH-Treble (Android Pie 9.0)

WARNING: You'll most probably loose ALL your data, and might break your phone. Please use with extreme caution!
Before you start it's important to make a backup of your data you don't wanna lose.
I only have experience with installing phh-treble with TWRP, so this manual will be for TWRP.
Downloads:
First you have to download the image of PHH Treble (arm64) (Check this post)
After download just unzip the file.
(To know which version you need you can use the app Treble Check, if both of these blocks are green you need the A/B image else you nee the only A image.
The Mi8 is an only A image, but if you wanna know for sure you can use the app. )
In the PHH Treble rom there are no Google Apps (Gapps), so if you want the play store and such other apps of google you have to download OpenGapps Unofficial
After download just keep the file as zip.
The overlay patch for fixing the notch you can find it in this post
It's important to be on the latest MIUI version, doesnt depend on Miui V9 or Miui V10, both will work.
Installing:
Step 1:
Be sure you got a backup of your data.
Step 2:
Reboot your phone in recovery.
Step 3:
Do a factory reset with TWRP. (Go to wipe and just swipe for a Factory Reset).
Step 4:
Transfer the system-arm64-aonly-vanilla-nosu.img, the OpenGapps.zip and the treble-overlay-xiaomi-mi8.apk to your internal storage.
Step 5:
Go to install, tap on Install Image and choose system-arm64-aonly-vanilla-nosu.img
Select the System Image partition to flash the image to and swipe to confirm flash.
Step 6:
If you want root just flash Magisk V16.7 now and reboot, without root only reboot needed.
Step 7:
When your phone is booted successfully just reboot into recovery.
Step 8:
If you want the Gapps, just flash them now.
Go to install, tap on install zip if it's not seeing any zip's yet.
Select the OpenGapps zip and flash it.
(It might happen the Setup Wizard keeps crashing! You can fix this by removing the SetupWizard.apk from /system/priv-app/SetupWizard. Use the file manager of TWRP)
Step 9:
To fix the notch of the Mi8 you have to copy the treble-overlay-xiaomi-mi8.apk to:
- /system/overlay
- /vendor/overlay
Step 10:
Reboot the phone and it is ready to be used!
If you installed Magisk you can install ViperFX 1.7 to fix the crappy sound.
If you still have any questions, just ask!
If I can improve this manual, just let me know
Big credits to:
- phhusson: PHH Treble Rom
- Nezorflame: OpenGapps
This one is for me!
Current bugs found:
- Hotspot (Bluetooth tethering works!)
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
can install face id in rom treble ?
Any bugs? What's about GPS and Wifi?
Ziarrr said:
can install face id in rom treble ?
Click to expand...
Click to collapse
Not working yet
0312Penner said:
Any bugs? What's about GPS and Wifi?
Click to expand...
Click to collapse
GPS and Wifi are perfect!
only bugs are:
- Hotspot
- NFC
- Notification sounds are a bit crappy
- Fingerprint scanner pretends to be an enter or select key
Can I go back to MIUI if I don't like it or are there problems with loading backups?
NielsvdS said:
Not working yet
Click to expand...
Click to collapse
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
xdamami said:
How? It is workin on smart lock section u can found face unlock. Not sure infrared working or not.
Click to expand...
Click to collapse
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
It is possbile! Maybe I will also create a guide for going back from a treble rom to MIUI.
First time when I tried the PHH-Treble rom the Wifi and Camera didn't work so I went back to MIUI.
For now I'm really satisfied!
I've tried LOS and PHH 8.1 but my gps doesnt want to work on either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
finger print sensor is working fine and wifi. I've just had a problem with the playstore on LOS but that might just be the version of GApps they install as default
EDIT.
I've fixed GPS now as far as i can tell. After turning gps off and on a few times and a couple of other things its now working
How is the camera at the moment compared to MIUI?
_katho_ said:
How is the camera at the moment compared to MIUI?
Click to expand...
Click to collapse
It is crappy, WhatsApp is creating to much brightness, but the OpenCamera works well, pictures are ok, but far from the stock camera
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
PolariSz said:
The kernel has been released! YAY!
https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/dipper-o-oss
Click to expand...
Click to collapse
Yeah! So nice.
I will take some time to create an custom rom for the Mi8 based on AOSP 9.0
NielsvdS said:
What kind of Gapps did you flash? I had the pico package, maybe it's because of the package type
Edit:
Flashed the Gapps Mini package and it does work now, but it's not using the IR, so in the dark it isn't working yet.
We still have to wait for the kernel release
Click to expand...
Click to collapse
Ha Just one day))) there is a kernel source available)). What is your stage for kernel komple? will be good with Nethunter
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
moe.ze.chief said:
Installed this ROM on my Xiaomi Mi 8.
Can someone explain to me how I can get the Google (Pixel) Camera to work?
I‘m rooted with Magisk, but I can‘t find CameraApi2 in the build.prop to enable it.
Is there a zip file I can flash or a special camera apk to install?
Click to expand...
Click to collapse
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
NielsvdS said:
I found a working Google Camera APK, but don't know exactly which it is, so I made a backup of the APK
Here you can download it
You can also enable the CameraApi2 with a module of Magisk
Click to expand...
Click to collapse
Thanks!
Do you have a Link for the magisk module?
0312Penner said:
Can I go back to MIUI if I don't like it or are there problems with loading backups?
Click to expand...
Click to collapse
Just flash e.g. an xiaomi.eu Rom. There is a full installer and its no problem to go back to miui.
Factory reset and flash in TWRP

[ROM][SM-T580/5][UNOFFICIAL][PixelExperience][9.0][64-Bit] -> 20190916 (DISCONTINUED)

[ROM][SM-T580/5][UNOFFICIAL][PixelExperience][9.0][64-Bit] -> 20190916 (DISCONTINUED)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience​
DISCONTINUED
Pls find the last downloads here ..
https://androidfilehost.com/?w=files&flid=289289
https://androidfilehost.com/?w=files&flid=289291
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Pixel Experience - Plus
PixelExperience_Plus_gtaxlwifi-9.0-20190916-1148-UNOFFICIAL.zip
PixelExperience_Plus_gtaxllte-9.0-20190916-1409-UNOFFICIAL.zip
Pixel Experience
PixelExperience_gtaxlwifi-9.0-20190206-1143-UNOFFICIAL.zip
PixelExperience_gtaxllte-9.0-20190206-1435-UNOFFICIAL.zip
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data !
3. Install ROM.zip
4. install Magisk.zip
5. Reboot into system
- This ROM does include Gapps already !
TWRP:
Based on OMNI sources ..
twrp-3.3.1-1-gtaxlwifi-OMNI6 / twrp-3.3.1-1-gtaxllte-OMNI6
https://drive.google.com/drive/folders/1H3-CU3p-mGf0b_oQ69wirVcgd-okF-ps
SOURCES:
I have added manifest as well .. to be able to build future builds yourself.
https://github.com/followmsi/manifests/tree/gtaxl-pixel-pie
https://github.com/followmsi/android_device_samsung_gtaxlwifi/tree/pixel-pie_64-bsp
https://github.com/followmsi/android_device_samsung_gtaxllte/tree/los-16.0_64-bsp
Thanks to @cschsz for all the kernel security updates !
Big thanks to @Valera1978 for all his work !
Enjoy
Another Android "flavor" for 580/585 .. Pixel Experience
No worries .. except for RR Pie there are no more additional ROMs in the pipeline
Cheers
OMG. COOL. I was thinking of making one myself, but you already made one. Saves me the trouble ?
Wanting to try this out, but not sure about two things. In the Drive folder, there is a Pie/Oreo kernel as well as a different version of twrp from what I'm using. Is it necessary to install both of these along with this rom? Thanks
I know this could seem unnecessary but please put each type of rom into different folders. It is starting to become a mess to find the right rom.
Hmmm, this rom is reporting as a Xiaomi MI6 phone. Technically not a big deal, but figured I point it out. Also, switching to the front facing camera causing the camera app to crash. Going to the app section in setting and clearing data for the camera app fixes the crashing, but will popup again if you switch to the front facing camera again.
This one could be me, but flashing Magisk causing two apps to show up. One more thing, the app icons don't "look" right, they seem to look round but are cut off at the edges.
rev79 said:
Wanting to try this out, but not sure about two things. In the Drive folder, there is a Pie/Oreo kernel as well as a different version of twrp from what I'm using. Is it necessary to install both of these along with this rom? Thanks
Click to expand...
Click to collapse
If your current twrp works fine you do not need anything else ..
Just follow the instructions ..
Installation:
1. Boot into TWRP
2. Wipe system, cache, dalvik and data !
3. Install ROM.zip
4. install Magisk.zip
5. Reboot into system
Cheers
-Maverick- said:
Hmmm, this rom is reporting as a Xiaomi MI6 phone. Technically not a big deal, but figured I point it out. Also, switching to the front facing camera causing the camera app to crash. Going to the app section in setting and clearing data for the camera app fixes the crashing, but will popup again if you switch to the front facing camera again.
This one could be me, but flashing Magisk causing two apps to show up. One more thing, the app icons don't "look" right, they seem to look round but are cut off at the edges.
Click to expand...
Click to collapse
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
paulo boë said:
OMG. COOL. I was thinking of making one myself, but you already made one. Saves me the trouble [emoji6]
Click to expand...
Click to collapse
You are welcome ..
Unlike to the upcoming RR Pie there are no regular builds planned for Pixel Experience.
If you plan building regular Pixel Experience ROMs .. Pls go ahead.
Cheers
followmsi said:
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
Click to expand...
Click to collapse
Just tried this rom. Camera works fine, using Open Camera app. I enabled the setting to use camera2 api in the app's settings first page. I started enabling it on all roms after noticing that it helps the flash to be in sync with the shutter on lineage 16 or crdroid rom. So maybe this setting helps the performance of camera in other ways also.
The gps was choppy at first, as usual for me (using T585) on pie roms. but after some idle time it stopped freezing the device and started getting a fix. So I hope the choppiness of the gps on pie roms is a one time thing after installing a new rom.
followmsi said:
Fingerprint only .. As xiaomi sagit ..to bypass safety net checks with magisk.
Stock Samsung fingerprint does not work on 64-bit.
Which camera app ?
Normally snap camera should have been installed .. Need to check.
Click to expand...
Click to collapse
The one that comes with the rom. Back camera works fine, switching to the front camera causing the camera app to crash.
Great rom !! Thanks followmsi as usual for your hard work
Great job!
It's possible to wake up the device with the Home button and not only with the Power button?
AOSP Extended
followmsi said:
Another Android "flavor" for 580/585 .. Pixel Experience
No worries .. except for RR Pie there are no more additional ROMs in the pipeline
Cheers
Click to expand...
Click to collapse
How about AEX
ginopinotto said:
Great job!
It's possible to wake up the device with the Home button and not only with the Power button?
Click to expand...
Click to collapse
Home button in next ROM ..
Greenchain said:
How about AEX
Click to expand...
Click to collapse
Just build yourself
Thanks for adding Home button to wake up the devices in the next build.
Cast screen doesn't work in this build.
There will be a future update of this ROM? At least add the Home button to wake up the devices
Thanks
ginopinotto said:
There will be a future update of this ROM? At least add the Home button to wake up the devices
Thanks
Click to expand...
Click to collapse
Yes .. at least one more build to fix home button.
But next month only .. including Feb security updates.
Cheers
Pixel Experience .. the final ROM
PixelExperience_gtaxlwifi-9.0-20190206-1143-UNOFFICIAL.zip
PixelExperience_gtaxllte-9.0-20190206-1435-UNOFFICIAL.zip
Changes:
- Google security updates -> February 2019
- Changed overlays to (hopefully) fix wake up with HomeButton -> needs testing
Pls go ahead and start building regular PE builds for SM-T580/585.
I just don't have the time to make regular PE builds too.
It's still a nice option for our devices.
Enjoy

How To Guide [New v2023.05.18] Ponces' s AOSP A13 GSI (Android OS version: 13.0.0_r49) update

Download: https://github.com/ponces/treble_build_aosp/releases
TEST: DeGoogle GSI only exFAT sd card supported.
☆☆ Create LeOS TD for support exFAT and works smoothly.
Degoogle (LeOS-T April 2023 Only ) A13 GSI Run with exFAT SD card supported.
Supported exFAT only 1 Variant LeOS-T April 2023 Only ============================ Step to install LeOS-T GSI Variant. DOWNLOAD--firmware from https://samfw.com/ 0. Create patch-recovery for fastbootD ☆☆☆ FastbootD video tutorial ...
forum.xda-developers.com
☆☆ AOSP A13 vs AOSP Android 14☆☆
☆☆☆ FastbootD video tutorial : https://m.youtube.com/playlist?list=PLvggR4skCxYzhB3SXxpSx4LvRzGwx9k45
Based on android-13.0.0_r44
TREBLE DROID Phh android_13.0.0_r41 ci-20230429 (https://github.com/TrebleDroid/treble_experimentations/releases/tag/ci-20230429)
==============≠={{
✓ Pure AOSP A13 From Ponces Developer.
AOSP 13.0 v2023.05.03​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First boot
Change default Home-Launcher.( Test Float Launcher )
✓Bluetooth:
no problem about connectivity.
✓No Offline charging function.
✓During power-on device we must insert charging cable before turn-off your tablet.
update: Next 》》》 Mod New Float and auto-hide Navigation.
Do you want try this :https://forum.xda-developers.com/t/closed-one-ui-gsi-to-all-samsung.4543881/
May be we can upgrade to one ui 6.0 with gsi on some day
Difficul said:
Do you want try this :https://forum.xda-developers.com/t/closed-one-ui-gsi-to-all-samsung.4543881/
May be we can upgrade to one ui 6.0 with gsi on some day
Click to expand...
Click to collapse
Do not promote thread closed. Drink coffee better my friends.
Thank you so much, I've been looking for a pure AOSP w/ Gapps rom for a bit. Testing it w/o any issues so far.
@tom.android is auto brightness working? I can see the light sensor reading but no option to enable it.
hackthis02 said:
@tom.android is auto brightness working? I can see the light sensor reading but no option to enable it.
Click to expand...
Click to collapse
must make overlay for it.
tom.android said:
must make overlay for it.
Click to expand...
Click to collapse
I made this one last night but wasn't able to get it working. Either I did it wrong, following phhusson wiki. Or there is more to it than putting it in /system/vendor/overlay and changing the permissions.
hackthis02 said:
I made this one last night but wasn't able to get it working. Either I did it wrong, following phhusson wiki. Or there is more to it than putting it in /system/vendor/overlay and changing the permissions.
Click to expand...
Click to collapse
If you have Magisk installed, that's an easy way to install an alternative overlay apk, otherwise putting it in /system/vendor/overlay should work if the overlay is valid. Here's the overlay I made for myself along with the Magisk module I created in order to install it.
Hai Karate said:
If you have Magisk installed, that's an easy way to install an alternative overlay apk, otherwise putting it in /system/vendor/overlay should work if the overlay is valid. Here's the overlay I made for myself along with the Magisk module I created in order to install it.
Click to expand...
Click to collapse
I wasn't using Magisk, but I flashed it and it seems to be working. Thanks.
hackthis02 said:
I wasn't using Magisk, but I flashed it and it seems to be working. Thanks.
Click to expand...
Click to collapse
Ok if it not works , pm me again.
NOTE: Try to see both auto screen brightness and individual power usages history works also.
tom.android said:
Ok if it not works , pm me again.
NOTE: Try to see both auto screen brightness and individual power usages history works also.
Click to expand...
Click to collapse
@Hai Karate module fixed Auto brightness. Do you mean this for power usage?
hackthis02 said:
@Hai Karate module fixed Auto brightness. Do you mean this for power usage?
View attachment 5903171
Click to expand...
Click to collapse
Ya it ok
@tom.android how did you enable the floating taskbar in your screenshots? My still looks like the QPR1 version.
hackthis02 said:
@tom.android how did you enable the floating taskbar in your screenshots? My still looks like the QPR1 version.
Click to expand...
Click to collapse
It was my mod launcher for LeOS-T (A13 PQR-2) Floating Main Navigation) can enable from developer Options menu. ( Can't run on Ponces' s AOSP A13 GSI. test mode only.
Hey ! Someone can send me tha AP file i really wanted to try this GSI i am student & i really don't understand how to make AP file ! Sm-t220
Sakuna said:
Hey ! Someone can send me tha AP file i really wanted to try this GSI i am student & i really don't understand how to make AP file ! Sm-t220
Click to expand...
Click to collapse
Custom AP is inconvenient
You should try TWRP or stock recovery path with fastbootd found
Sakuna said:
Hey ! Someone can send me tha AP file i really wanted to try this GSI i am student & i really don't understand how to make AP file ! Sm-t220
Click to expand...
Click to collapse
Read my tutorial here.

			
				
New update
"AOSP 13.0 v2023.05.18"
Android OS version: 13.0.0_r49
Download: https://github.com/ponces/treble_build_aosp/releases
What new ?
Test with DSU Sideloader.
Video: uploading....

Categories

Resources