[ROM][Port][7.1.1]SpaceOS by Allan Rodrigues[J510F/FN/MN] - Samsung Galaxy J5 (2016) ROMs, Kernels, Recoveries

Disclaimer:
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
You are NOT authorized to take, modify, upload ANY file or the whole ROM without my permissions.
Rom Info:
Based on Latest Stock Firmware of J5 2016
build: J510FNXXU2BRD7 firmware
Security Patch: 01-May-2018
Features:
-Pure Stock Rom with Added Essential Features
-Android 7.1.1 Samsung Experience 8.5
-Root choice in Aroma
-Debloated
-DeKnoxed
-Extremely Fast & Stable
-Much faster than Stock Marshmallow
-Tweaked for best performance in J5 2016
-Safety Net passed
Installation:​
Code:
1. You should have 7.1.1 based firmware
2. Install Recovery with Support Aroma
3. Download the ROM and copy it to your sd card.
4. Enter in Recovery and make wipes (Recommended Full wipes)
5. After follow the instructions of the Aroma Installer
6. Select addons in aroma
7. Wait 10 to 20 minutes (First start of installation, slight delay)
8. Configure and enjoy the pure Nougat Stock ROM
This is my first attempt at porting roms so please be kind.. ​
Download HERE:
Google Drive(SpaceOS v1.0)(Update 01-09-2018)
SpaceOS official Telegram Channelhttp://t.me/spaceos
SpaceOS official Telegram Grouphttp://t.me/galaxyj5_xda
Kernel used:
Quasar Kernel 1.6
Bugs and Issues:
Code:
-None
ChangeLog:
Version 1.0:
Dolby Digital Plus (Select in Aroma)
Viper4AndroidFx (Select in Aroma)
Reminder
Multiwindow
VoLTE (Select in Aroma)
Icon 4G and LTE (Select in Aroma)
Samsung Experience 8.1 and 8.5 (Select in Aroma)
Wallpaper (Select in Aroma)
Languages Keyboard Englis US and KO (Select in Aroma)
Cornerfly Rounded Corner
Update Apps
Shazam Line
YouTube Vanced
Titanium Backup
S Voice
Caller ID and SPAN Protection
Scroll Capture
Edge Panel
Private Mode
NavigationBar
Contributors
Allan Rodrigues for porting
Samsung for firmware
ROM OS Version:7.1.1 Nougat Touchwiz
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-09-01
Created 2018-05-25
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Installed rom just done the usual 4 wipes takes a good 20 mins for install.Looks great and Leviathan kernel fantastic.Only problem storage is a no no.Cannot recognise externel sd card and internel is only showing about 900 meg and I have 3gb at least.I could do all the full wipes and try again but will wait for someone else to try first I don't know if the firmware has anything to do with this am on latest nougat and I know rom says must be on MM firmware.If storage fixed this will be one great rom.

Finsnevis said:
Installed rom just done the usual 4 wipes takes a good 20 mins for install.Looks great and Leviathan kernel fantastic.Only problem storage is a no no.Cannot recognise externel sd card and internel is only showing about 900 meg and I have 3gb at least.I could do all the full wipes and try again but will wait for someone else to try first I don't know if the firmware has anything to do with this am on latest nougat and I know rom says must be on MM firmware.If storage fixed this will be one great rom.
Click to expand...
Click to collapse
I have the same problem.

Finsnevis said:
Installed rom just done the usual 4 wipes takes a good 20 mins for install.Looks great and Leviathan kernel fantastic.Only problem storage is a no no.Cannot recognise externel sd card and internel is only showing about 900 meg and I have 3gb at least.I could do all the full wipes and try again but will wait for someone else to try first I don't know if the firmware has anything to do with this am on latest nougat and I know rom says must be on MM firmware.If storage fixed this will be one great rom.
Click to expand...
Click to collapse
It could be because of the kernel,go into recovery and flash a different kernel.

N1ck31 said:
It could be because of the kernel,go into recovery and flash a different kernel.
Click to expand...
Click to collapse
Yeah I actually thought of that but the Leviathan kernels for 2016 run fine I have them on odyssey as well as quasar and on stock nougat roms.May be worth a try Leviathan kernels run better on super su but I run them on magisk no problem.I know bulgaricus said they better with supersu as magisk can cause overheating in Leviathan.But still cannot figure how kernel causing storage probs.I may reflash with quasar and see what happens.

Finsnevis said:
Yeah I actually thought of that but the Leviathan kernels for 2016 run fine I have them on odyssey as well as quasar and on stock nougat roms.May be worth a try Leviathan kernels run better on super su but I run them on magisk no problem.I know bulgaricus said they better with supersu as magisk can cause overheating in Leviathan.But still cannot figure how kernel causing storage probs.I may reflash with quasar and see what happens.
Click to expand...
Click to collapse
I flashed with quasar and everythings alright

N1ck31 said:
I flashed with quasar and everythings alright
Click to expand...
Click to collapse
Yes am the same just flashed it with quasar during install with magisk and now device certified.Leviathan was the problem.

I have Sep 8.5 3.0 with 7.1.1. , what do I need to do to install this rom?

RicardoArantes said:
I have Sep 8.5 3.0 with 7.1.1. , what do I need to do to install this rom?
Click to expand...
Click to collapse
Just the usual 4 wipes dalvike data system and cache.Install the rom with aroma choose what you want and choose not to root.Then install quasar kernel 1.6 fix zip or quasar v2 then install magisk and then reboot the rom.The Leviathan kernel will not give you storage access to external sd card and internal storage size is wrong with Leviathan.Rom is perfect with quasar.You then have device certified in the play store that is safety net passed in magisk.If you flash with leviathan device is not certified and you don't have storage

This rom is just mind boggling!!
The performance, tweaks and built-in functions are bestest from all the available roms in J5 2016 thread. The roms response is too fast and fluent. I can say that this is the best rom for J5 2016.
Please avoid the above problem messages regards to the kernel, the download link has been updated now and the built-in kernel replaced with Quasar v1.6. I've also found that VoLTE is not active in this release even after selected in aroma. Hope to see new release with updated security patch and fixed VoLTE calling.
Thank you so much @ZJRDroid

Brilliant rom now everything working great with quasar.This is the fastest TW nougat rom to date.Great performance fast and smooth.Dolby and viper are fantastic together sound incredible.Great work developer and all who contributed to the rom.

Great Rom but discharge quickly. Can you please look into that?

Battery drain so quickly.

Finsnevis said:
Just the usual 4 wipes dalvike data system and cache.Install the rom with aroma choose what you want and choose not to root.Then install quasar kernel 1.6 fix zip or quasar v2 then install magisk and then reboot the rom.The Leviathan kernel will not give you storage access to external sd card and internal storage size is wrong with Leviathan.Rom is perfect with quasar.You then have device certified in the play store that is safety net passed in magisk.If you flash with leviathan device is not certified and you don't have storage
Click to expand...
Click to collapse
It didn't install because I'm on 7.1.1, how do I downgrade?

RicardoArantes said:
It didn't install because I'm on 7.1.1, how do I downgrade?
Click to expand...
Click to collapse
You don't need to downgrade.Am on 7.1.1 and it installed no problem and check the previous page as seemingly the rom kernel has been updated to quasar.I have J510FN and works don't know about other models.Use twrp 3.1.1.0 it should just be a matter of downloading the rom again and flashing it.No problems exist with flashing it on 7.1.1 no need to downgrade.

RicardoArantes said:
It didn't install because I'm on 7.1.1, how do I downgrade?
Click to expand...
Click to collapse
It seems you have older version of this rom. Download the rom again with the provided link, new rom have Quasar inbuilt and you won't face this issue.

Freak3672 said:
It seems you have older version of this rom. Download the rom again with the provided link, new rom have Quasar inbuilt and you won't face this issue.
Click to expand...
Click to collapse
I already have that but it didn't work, I'll try again

Can i flash it on TWRP 3.2.1 or only 3.1.1 like other TW ROMs?
Edit: It works like a charm on 3.2.1

does the battery is going too fast? or is the same as stock ?

How to disable the warning from mobile data/connection ( I don't know the right word) being turned on or off?
Also, MTweaks doesn't open, it stays with a white screen

Related

[ROM][J7][Stock] Stock Custom ROM debloated and deodexed and Optimized

Samsung Galaxy J7 Stock Custom ROM​​[highlight]
The Original Firmware is made by Samsung
I have Deodexed and debloated the Rom :angel:
Dont Forget to Hit Thanks!
THIS ROM WILL BE UPDATED MONTHLY AS SOON AS SAMSUNG RELEASES AN UPDATE FOR J700F/H/M ANYWHERE ON THE PLANET
[/highlight]
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Introduction
ROM Details:
* Android version: 5.1.1
* Current Security patch version: June 2016
* Based on: J700MUBU2APF1
* Multilanguage
* ROM date: 16/06/2016
Click to expand...
Click to collapse
Images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Installation instructions
Code:
[color=blue]
* Download the ROM *
* Reboot to recovery *
recommend TWRP recovery found [URL="https://dl.twrp.me/j7elte/"]here[/URL]
* Wipe data/factory reset * (No need to wipe data if u want to Dirty flash over any previous deodexed ROM)
* Flash the ROM (no need of Gapps) *
* Reboot your phone *
* Enjoy *
[/color]
Download
RECOMMENDED FOR Daily Use :
June build Deodexed and Highly debloated ROM (Small Sized) with OptiMax -> J7 June Stable Debloated
VoLTE fix Here : j7newvoltefixfeatures.zip
-No need to flash custom kernel again
-No need to flash superSU v2.46 for root
-No bugs and Default apps thing is fixed
April build Deodexed -> J7 April Stable Debloated
Deodexed and Mildly debloated ROM with stock kernel -> J7 March 18
Deodexed and Highly debloated ROM (Small Sized) with stock kernel -> J7 March Debloated
Old Versions : J7 Feb 24 based on J700MUBU1APB2
Deodexed and Highly debloated ROM (Small Sized) with Custom kernelv1 -> J7 Stable Debloated
Deodexed and Mildly debloated ROM with stock kernel -> J7 Feb 24
IMPORTANT TIPS and NOTES :
USSD CODES like *#0011# might not work, FIX : Use Phone info app from play store, goto other tools and u'll see SERVICE MODE (root) click that
Stock kernel is SELINUX enforcing, Viper FX might not work
FIX : Flash any custom kernels found here
Tips :Flash OptiMax2.0 kernel (no bugs) : flash this and This
Note : Uninstall updates of SuperSU app and then update it from play store if u get binaries update error after flashing the above mentioned files
ViperFX and Nice audio mod : http://forum.xda-developers.com/showthread.php?t=2530976 and do look at this http://forum.xda-developers.com/zenfone2/general/collection-convolver-samples-389-t3140299
Stock kernel flashable zip : here
Changelog
Code:
-> Fixed Debloated rom
Current changelog: 18/03/2016
-> Base Update to J700FXXU2APC4
-> Removed bloat and bugs, UI is more fluid
-> included minimal gapps
-> set_metadata method for faster installation
Click to expand...
Click to collapse
FAQ
Q: Can I flash this rom on J700F/H/M?
Answer: Yes, this rom works on any J7 variant with Exynos 7580 chipset
Q: Can I install Touchwiz/Samsung themes?
Answer: Ofcourse, Themes and theme store are working fine
Q: Where to report a bug?
Answer : Dont PM me, just reply in this thread.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
Samsung
SakIndia123 for custom Kernels
Nice work dude. I am sure try this heavily debloated one. But as you said in the group that this heavy version is down?
Its just temporarily down bro
Thanks bro
Debloated ROM
Debloated rom has been fixed and here's the link : http://www.mediafire.com/download/73nx0j1hx41nlh0/J7march18_pavanl_Debloated_fixed.zip
Do report if u face any bug(s)
Read the first post again for Tips and Notes
:angel:
Thanks alot @pavan l
Great work from a great guy. Thanks a lot bro. Keep it up ???
Pavan l said:
Debloated rom has been fixed and here's the link : http://www.mediafire.com/download/73nx0j1hx41nlh0/J7march18_pavanl_Debloated_fixed.zip
Do report if u face any bug(s)
Read the first post again for Tips and Notes
:angel:
Click to expand...
Click to collapse
Volume mod pre installed like earlier rom??? That was fun as stock volume sucks..also anything new in the march update?? how can we get center clock etc mods..u got any zip...thanx for ur hard work....also I forgot to mention that sometimes notifications are delayed as in whatsapp shows messages from 3 chats altogether but they came in at diff times...any ideas???
Pavan I thanks brother..
Sent from my SM-J700F using Tapatalk
New update of date 21-3-2016
I found that there is a new updaye for j7 f model in the sammobile firmwaee section. Will we get this update.
devangashar said:
Volume mod pre installed like earlier rom??? That was fun as stock volume sucks..also anything new in the march update?? how can we get center clock etc mods..u got any zip...thanx for ur hard work....also I forgot to mention that sometimes notifications are delayed as in whatsapp shows messages from 3 chats altogether but they came in at diff times...any ideas???
Click to expand...
Click to collapse
Yeah volume mod is already applied
March update has stability improved and new themestore, camera improved alot I must say, ui improved, smart manager has some more features...and under the hood changes...
For center clock n all, use Xposed by Wanam
Whatsapp notification delay is there in Stock rom itself since October build.. Samsung messed it up badly
dipakd said:
I found that there is a new updaye for j7 f model in the sammobile firmwaee section. Will we get this update.
Click to expand...
Click to collapse
It's the same thing which I've made. Sammobile is jus slow in updating their database.
Do not fear. I will update my rom to latest build wherever it may release on planet earth
Pavan l said:
Yeah volume mod is already applied
March update has stability improved and new themestore, camera improved alot I must say, ui improved, smart manager has some more features...and under the hood changes...
For center clock n all, use Xposed by Wanam
Whatsapp notification delay is there in Stock rom itself since October build.. Samsung messed it up badly
Click to expand...
Click to collapse
yeah they did...they suck big time..upon that bloatwares...bloatwares everywere
Can anyone help? After I installed the mildly deflated rom my device doesn't boot up it just shows the galaxy j7 logo then turns off. Can any one help me solve this? I really want to install the new rom.
longdong25 said:
Can anyone help? After I installed the mildly deflated rom my device doesn't boot up it just shows the galaxy j7 logo then turns off. Can any one help me solve this? I really want to install the new rom.
Click to expand...
Click to collapse
Try to wipe data, system, dalvik and cache, then flash again the rom bro.
Yes I did that also still won't work
longdong25 said:
Yes I did that also still won't work
Click to expand...
Click to collapse
Redownload the rom you are flashing bro. Maybe something is broken.
Okay I'll try
Let it reboot. Damn
longdong25 said:
Okay I'll try
Click to expand...
Click to collapse
It doesn't boot the first time after flashing cuz of SuperSU kernel patch, it'll boot the second time. Do not do anything after flashing (and reboot to system) wait for it to boot. It will boot definitely :angel:
You mean after flashing I don't do a reboot right away? Sorry I'm a noob

[SM-P601] [ROM] [7.1.2] [20220221] Unofficial LineageOS/RR/AICP

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Special thanks:
Christopher N. Hesse - RaymanFX
The guys of the Exynos 5420 team
What works:
3G
Sound
Microphone
Bluetooth
Bluetooth calls
WiFi
WiFi direct
WiFi hotspot
GPS
InfraRed
Stylus
All sensors (compass, gyro...)
OTG
SD card
Camera/Torch
Screen Record
Call record
Screen cast/Wireless display
What does not work / current issues:
ANT+
No sound, in a bluetooth headset, with a gsm call, if the headset connected to the device at boot time.
Attention! Starting from 20170326 builds, the bootloader should be from the official 5.1.1 firmware.
How to upgrade bootloader to 5.1.1 (if previously used stock 4.2.2 firmware).
My TWRP 3.5.2_9-1 for SM-P600/SM-P601 Last build 20210414:
Cloud Mail.ru - zip and img.tar (for ODIN) files.
Download:
Lineage OS 14.1
Resurrection Remix - final
Android Ice Cold Project (AICP) - final
Kernel for SM-P602 tablets
GoogleAPPS:
Open Google Apps project
Sources in GitLab:
Device
Vendor
Kernel
TWRP
Programs that I use for s-pen:
SPenCommand - action menu (paid app)
Google Handwriting - Keyboard for Handwriting
Donated:
Unknown good person... (20180227 19:05 MSK)
XDA:DevDB Information
SM-P601 Android 7.X, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ShevT
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2017-01-27
Last Updated 2020-11-16
Spoiler: Changelog
20220221:
ASB 2022-02-05
20210818:
ASB 2021-08-05
20210415:
TWRP 3.5.2_9-1
ASB 2021-04-05
Chromium Webview 90.0.4430.66
20210308:
ASB 2021-03-05
Chromium Webview 89.0.4389.72
20210208:
ASB 2021-02-05
tzdata 2021a
20201228:
TWRP 3.5.0-1
20201216:
ASB 2020-12-05
Kernel: Updated sdfat driver to 2.4.5
20201116:
TWRP 3.4.0-2​ASB 2020-11-05​Android WebView 86.0.4240.198​
20201008:
ASB 2020-10-05​Android WebView 86.0.4240.75​Kernel CVE fixes​
20200911:
ASB 2020-09-05​
20200824:
Minor fixes​
20200805:
ASB 2020-07-05​ASB 2020-08-05​Additional kernel CVE fixes​
20200629:
TWRP 3.4.0-1​ASB 2020-06-05​Additional kernel CVE fixes​
20200507:
ASB 2020-05-05​Additional kernel CVE fixes​
20200413:
ASB 2020-04-05​Additional kernel fixes​Android WebView 81.0.4044.96​
20200323:
Fix audio record​Fix sound on GSM calls​Check Bluetooth GSM calls​Additional kernel fixes​
20200306:
ASB 2020-03-05​Kernel: CVE fixes​WebView_80.0.3987.132​
20200113:
ASB 2020-01-05​Kernel: CVE fixes​Kernel: sdfat: Update to version 2.3.0​TWRP 3.3.1-5​
​
Deathly Adiutor
No longer supported
Lineage OS
Lineage OS
About | Home Page | Git page​
Lineage OS 14.1
Screenshots:
Downloads:
Cloud Mail.ru. Last build 20220221
Click to expand...
Click to collapse
Resurrection Remix N
Home Page | Git page​
Resurrection Remix 5.8.5 Stable - final.
It will not be updated anymore.
Screenshots:
Downloads:
Mail.ru Cloud. Last build 20180514
Click to expand...
Click to collapse
AICP
Android Ice Cold Project
Home Page | Git page​
AICP version 12.1 - final.
It will not be updated anymore.
Screenshots:
Downloads:
Mail.ru Cloud. Last build 20180514
Click to expand...
Click to collapse
SM-P602 kernel
Kernel for SM-P602 tablets​Downloads:
Cloud Mail.ru. Last build 20201219
Installation:
1) Install firmware
2) Install OpenGapps
3) Install this kernel
4) Reboot
Click to expand...
Click to collapse
Upgrade bootloader to 5.1.1
This will fix the all problems with the sound on my firmwares in the transition from the official 4.2.2 firmware.
Attention! I do not take any responsibility for possible negative consequences.
1) Make a backup copy of all data (including sections EFS, Modem, Preload)
2) Copy backup on PC
3) Download Odin 3.10 and Bootloader (This bootloader from P601XXUDOJ2 - official 5.1.1 service firmware).
4) Run device in "Download" mode.
5) Connect device to PC.
6) Run Odin
7) In the BL (bootloader) field, insert downloaded file BL_P601XXUDOJ2_CL5984967_QB6591366_REV00_user_low_ship.tar.md5
8) Сheck "F. Reset Time" Odin option. Must be selected.
9) Press "Start" button.... The bootloader will be installed and the device going to reboot.
10) You can go to TWRP and restore the backup (It is enough to restore the data and /data partition).
11) Install firmware and OpenGapps.
Currently, the firmware is installed on the following bootloader versions..
Great Work Man :good: ... Will give it a try ... also , I'll go for maintaining a CM 14.1 version of our Prime Kernel !!! ... Thanks for the great job :good:
With Best Wishes
Hitman1376​
hitman1376 said:
Great Work Man :good: ... Will give it a try ... also , I'll go for maintaining a CM 14.1 version of our Prime Kernel !!! ... Thanks for the great job :good:
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
I have applied your kernel for my P601 on 5.1.1 ROM
Mixture:
Stock ROM LL 5.1.1 (Untouched - Sammobile)
Prime Kernel V 6 by Hitman1376
Wanam Xposed 87.1 sdk 22 custom build by wanam
Xposed Installer 3.1.1
SuperSU 2.79 SR3 System Mode
Busybox 2.5.1
Arise sound mods (Viper 4Android)
Dolby Atmos
Audio FX
Synapse
Hopefully you will be able to create for LOS/AOSP based ROM, it will be wonderful combination.
It is hard to find custom kernel for P601.
Thank you both for @ShevT and @hitman1376 in advance.
Regards.
ghembuls said:
I have applied your kernel for my P601 on 5.1.1 ROM
Mixture:
Stock ROM LL 5.1.1 (Untouched - Sammobile)
Prime Kernel V 6 by Hitman1376
Wanam Xposed 87.1 sdk 22 custom build by wanam
Xposed Installer 3.1.1
SuperSU 2.79 SR3 System Mode
Busybox 2.5.1
Arise sound mods (Viper 4Android)
Dolby Atmos
Audio FX
Synapse
Hopefully you will be able to create for LOS/AOSP based ROM, it will be wonderful combination.
It is hard to find custom kernel for P601.
Thank you both for @ShevT and @hitman1376 in advance.
Regards.
Click to expand...
Click to collapse
I'm glad you liked our project ... I hope We can make it even better than it's current status ... You're right with the kernel being scarce ... It's the only reason for me to release Prime ... I hope you guys like our future release
With Best Wishes
Hitman1376​
Unstable
Very very very unstable...
Sometimes restarts itself...
Sometimes it will freeze...
Some times it will work without any problem.
I don't know what is wrong with it... But it is highly unstable.
Is there support for the P600 model?
Wow, great news, will try the ROM when I get some tree time and after we get some more releases.
Enviado de meu SM-P601 usando Tapatalk
mohamadreza33 said:
Very very very unstable...
Sometimes restarts itself...
Sometimes it will freeze...
Some times it will work without any problem.
I don't know what is wrong with it... But it is highly unstable.
Click to expand...
Click to collapse
Man , Did you try switching into the KK bootloader or you were using the Lollipop bootloader ?
hitman1376 said:
Man , Did you try switching into the KK bootloader or you were using the Lollipop bootloader ?
Click to expand...
Click to collapse
I'm using lollipop bootloader
mohamadreza33 said:
I'm using lollipop bootloader
Click to expand...
Click to collapse
All AOSP builds are currently just for KK bootloader ... Lollipop Bootloader is not compatible with our AOSP builds ... Please Switch then
mohamadreza33 said:
Very very very unstable...
Sometimes restarts itself...
Sometimes it will freeze...
Some times it will work without any problem.
I don't know what is wrong with it... But it is highly unstable.
Click to expand...
Click to collapse
I'd say to stay with CM13 based before migrating to LOS14, this release still in developing stage.
Currently, Im on rooted stock 5.1.1. No problem so far. Will migrate to 14 when it reach at least 2-3 more builds.
Sent from my SM-N930F using Tapatalk
Nice Job.
So I tried this rom out last night. This is the first time I've used a rom outside of hyperdrive that everything seems to work that I have tried. I was a little hesitant to give this a shot since the op mentioned slow video, but when I downloaded youtube everything played back just fine. Only minor issues I have had thus far is that the default file manager does not load the SDCard properly. It points to /SDCard and from what I can tell should point to /SDCard1. I downloaded a third party file explorer and had no issues accessing the SDCard from there (even tried running the file manager as root). Only other minor issue is I am occasionally getting a pop up about MTP stopped running.
Updated
New update

RROS v5.8.5 for Honor 4X (Che2-L11) (Kirin 620)

Resurrection Remix Nougat​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
RR-N-v5.8.5-20190503-cherryplus-May:
SourceForge | MEGA
MD5: 6e0f707ba9973cdd1f05ac9c1c90864f
* OpenGApps
Currently working:
* network (2G-LTE) dualsim
* Wi-Fi
* BT
* sdcardfs
* GPS
* OTG
* adopted storage
* ussd
* call recording
* BT headset
* ROM already has root - cm su binary
Also, you can install Magisk
Currently not working
* SIM2 works only 2G
* Stock camera doesn't record video - use Footej Camera to do it
* tap to wake
* youtube 720p60
Installations
* Go to TWRP (now you can use official twrp cherry)
* Wipe system, data, dalvik, cache
* Install RR
or
can also be installed without copying the archive to the phone:
* in TWRP: Adviced - adb sideload - start
* on PC: adb sideload path/to/zip
Updates
* check updates in Settings - About - System Updates
* download update
* reboot device to TWRP
* install the new update of RR
* reboot to System
Thanks to OpenKirin for kernel source code GPL v2.0​
XDA:DevDB Information
Resurrection Remix Nougat v5.8.5 (Che2-L11, cherryplus) (Kirin 620), ROM for the Honor 4x
Contributors
ksrt12, fell9781, fitsuli
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 6.x (EMUI 4.x - Europa/Russia)
Based On: LineageOS
Version Information
Status: No Longer Updated
Current Stable Version: May-2019
Stable Release Date: 2019-05-03
Created 2017-09-25
Last Updated 2019-05-04
All builds: | MEGA
RR-N-v5.8.5-20180513-cherryplus-May-b5.zip
RR-N-v5.8.5-20180512-cherryplus-May-b4.zip (P8Lite partitions size)
RR-N-v5.8.5-20180223-cherryplus-Feb-b114.zip
RR-N-v5.8.5-20171220-cherryplus-Dec-b109.zip
RR-N-v5.8.5-20171129-cherryplus-Nov-b105.zip
RR-N-v5.8.5-20171026-cherryplus-Weekly-b101.zip
RR-N-v5.8.5-20171008-cherryplus-Weekly-b95.zip
RR-N-v5.8.5-20170926-cherryplus-Weekly-b92.zip
RR-N-v5.8.5-20170916-cherryplus-Nightly-b89.zip
RR-N-v5.8.4-20170913-cherryplus-Nightly-b88.zip
RR-N-v5.8.4-20170827-cherryplus-Nightly-b84.zip
RR-N-v5.8.4-20170816-cherryplus-Nightly-b77.zip
RR-N-v5.8.4-20170809-cherryplus-Nightly-b73.zip
RR-N-v5.8.4-20170807-cherryplus-Nightly-b71.zip
RR-N-v5.8.3-20170801-cherryplus-Nightly-b64.zip
RR-N-v5.8.3-20170720-cherryplus-Nightly-b53.zip
First link b91 again : D
keikari said:
First link b91 again : D
Click to expand...
Click to collapse
you did not see it
Glad you made it.
No credit for me as i suggested for this post?
Just kidding.
Good work and keep it up.
Good to see a stable RR custom ROM for Che2. Are you ging to post the SlimROM for Che2 in a separate thread as well?
wow that is fast.
good work
Iceman66 said:
Good to see a stable RR custom ROM for Che2. Are you ging to post the SlimROM for Che2 in a separate thread as well?
Click to expand...
Click to collapse
yes, I will create a separate project when I have free time
update ROM to RR-N-v5.8.5-20170926-cherryplus-Weekly-b92
Link to b92 is not working.
th0m4s said:
Link to b92 is not working.
Click to expand...
Click to collapse
And now?
problem report
Hello and thank you
where can I report Problems or Bugs?
there is one with dual sim 4G.
ggyasin said:
Hello and thank you
where can I report Problems or Bugs?
there is one with dual sim 4G.
Click to expand...
Click to collapse
Sim2 work only in 2G?
It isn't bug, it's huawei's feature. LTE on sim2 work only stock
ksrt12 said:
Sim2 work only in 2G?
It isn't bug, it's huawei's feature. LTE on sim2 work only stock
Click to expand...
Click to collapse
yes you are right.
but i'm wondering if there's a way of changing the sim that is currently 4G, like in stock android .
right now if i want to change the sim that i use as 4g I should physically change their places.
small disadvantage compared to all positive advantages of this Rom.
Now is ok
Hi!
Would it be possible to make rom without it forcing you to install magisk. Some still prefer to use SuperSU and it's simple to flash magisk after rom installation too.
keikari said:
Hi!
Would it be possible to make rom without it forcing you to install magisk. Some still prefer to use SuperSU and it's simple to flash magisk after rom installation too.
Click to expand...
Click to collapse
It is possible for ROM maintainer to build unrooted build..
If you don't want to flash magisk automatically with ROM you can delete magisk folder from the ROM zip and flash ROM...
hassanjavaid8181 said:
It is possible for ROM maintainer to build unrooted build..
If you don't want to flash magisk automatically with ROM you can delete magisk folder from the ROM zip and flash ROM...
Click to expand...
Click to collapse
I don't quite understand meaning of the first phrase.
Also thanks for the tip, I realized this too after awhile, but still going to leave the suggestion to remove magisk from rom itself(or mentioning about it in the first post would be helpful @ksrt12).
Everything else in new version feels even nicer than on previous versions.
keikari said:
I don't quite understand meaning of the first phrase.
Also thanks for the tip, I realized this too after awhile, but still going to leave the suggestion to remove magisk from rom itself(or mentioning about it in the first post would be helpful @ksrt12).
Everything else in new version feels even nicer than on previous versions.
Click to expand...
Click to collapse
Yeah finally RR got color theme engine which is really great..
keikari said:
I don't quite understand meaning of the first phrase.
Also thanks for the tip, I realized this too after awhile, but still going to leave the suggestion to remove magisk from rom itself(or mentioning about it in the first post would be helpful @ksrt12).
Everything else in new version feels even nicer than on previous versions.
Click to expand...
Click to collapse
I do not see the advantages of supersu before magick.
I think that most people on custom use root, and doesn't matter magisk or supersu
and since there are magisk in the RR sources, why not build it
if you don't like magisk you can remove it
ksrt12 said:
I do not see the advantages of supersu before magick.
I think that most people on custom use root, and doesn't matter magisk or supersu
and since there are magisk in the RR sources, why not build it
if you don't like magisk you can remove it
Click to expand...
Click to collapse
I meant that you could make it without root and let people choose themselves how they want to root it, but yeah I realized I can just remove it from zip. And it was just a suggestion.
But suggestion about mentioning in thread that it installs magisk would be good so no one will accidentally install SuperSu. So it won't cause any problems to anyone, since I think you shouldn't have both installed(not sure will it cause problems, but just in case).

[ROM] [8.0]Project Alice 4.0 [CRGI] [Tweaks] [Debloated] [ODEX] [July patch]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome!
TO​ Project AliceThe Smallest Touchwiz ROM ONLY 1,80GB in size.
Its Based on N950FXXS4CRG1latest Stock Base Fully Debloated and ODEXED Rom.
With The fast all New Touchwiz Experience 9.0 and close to stock feel this is the most fastest and stable fully Featured Rom..Yet.
There are a lot of plans, for this rom but first we want you to test it as much as possible.
Feedback is appreciated!.​
Features:
* Whole Download is 1,6GB in size [SLIM]
* Based off N950FXXS4CRG1
* Debloated
* Deknoxed
* System Optimizations
* Better Ram Managment
* Tweaks
* Magisk Root
* Init D tweaks
* Tweaks
* Reboot Menu
* Modded Touchwiz
* Better Stability & Performance ​
Changelog For Project Alice 4.0​-Rebased To Note 8 Oreo N950FXXS4CRG1​-July Security Patch​-Updated Magisk 16.7​-Added Auto csc and csc Tweaks​-Added Camera Modus​-Added GRX Touchwiz v8​-Added Multi User​-Added Trafic in statusbar for everyone​-Added Full Photo caller​-Added Anti spam​-Added Floating Messages​-Added More Animation Options​-Heavy Optimized​-Modded Phone official statusbar​-Faster Boot/reboot​-OEM FIX​-New Reboot Menu Added​-Audio Warning Removed​
Changelog For Project Alice 3.1​-Rebased to N950FXXU1AQI8​-Fixed Camera problems​-Fixed Camera problems​-Fixed FaceService on Note 8​-Fixed com.sec.epdg Error when installed csc​-Fixed Slow Charging by using NK210 Kernel​-Fixed Slow loading times on Youtube/Playstore app​-Updated Notorious Kernel on S8/S8/F/D/N​-Updated Notorious Kernel on Note 8 F/D/N​-Updated Magisk to Latest 14.3 Version​-Auto install Right Boot animation on Note 8​-Auto Install Right Audio Files for S8/S8++​-Auto Install Right Audio Files For Note 8​-Rewrited complete Updater-script​-Script Auto Detect Right Kernel now for S8/S8+/Note 8​-Script Auto install Right Files for Note 8 to boot now​-Enabled All hidden Camera Modus now​-Rom Now Support S8/S8+/Note 8 CSC​-Rom Detect and install Right CSC for s8/s8+/Note8 now​-Added More Build.prop Tweaks​-Added More System Tweaks​-Deleted Some More Sammy Bloatware​
Changelog For Project Alice 3.0.1​-Fixed FaceService For Note 8​-Updated Notorious Kernel on S8/S8/F/D/N​-Updated Notorious Kernel on Note 8 F/D/N​-Updated Magisk Manager​-Updated Magisk to 14.3​-Updated All Note 8 apps​-Tweaks and Optimalizations​-Added Note 8 boot animation For Note 8​-QHD @ 60fps (2560x1440) - Exynos Only​-HDR for 4K / QHD​-AutoFocus Tracking all modes​-No Recording Time Limits​-Increased Bitrates​-Increased JPG quality for single and burst shots​-Installs latest Samsung Camera revision​-Video Effects for modes 4K​-Remove No Flash limit at 15% battery​-Rom Debloated to 1.67GB​
Changelog Project Alice 3.0 Stable​-Better Support For Note 8​-Fixed All bugs on Note 8 models​-Fixed All Bugs on S8 Models​-Updated Notorious kernel For S8/S8+ Users​-Updated Magisk to 14.2​-Updated Magisk Manager​
Changelog Project Alice 3.0 Public Beta​-Fixed Wifi​-Fixed Camera​-Fixed FrontCamera​-Fixed FPS Lag​-Fixed IRIS Scanner​-Fixed Lib Error​-Fixed Youtube Video error​-Fixed CSC Error​-Fixed Edge Panel​-Added 5 Way reboot​-Added Support For Note 8 Devices (Stil Not fully done)​-Updated All Note 8 apps​-Updated Magisk​
Changelog Project Alice 3.0 Closed Beta​-Full N950FXXU1AQI1 7.1.1 Port for S8/S8+ F/D/N​-Debloated​-Deknoxed​-Added Modded Touchwiz​-Added Build.prop tweaks​-Added Note 8 CSC​-Added OTA APP (Stil not work for now)​-Added AddAway​-Added Notorious Kernel with Full N8 RamDisk​-Added Magisk 14.0​-Added Init D Support​-Zipaligned apps​-Rom Use Less Ram now​
Mod Edit
XDA:DevDB Information
Project Alice, ROM for the Samsung Galaxy Note 8 (2017 Phone)
Contributors
angelo27093
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Current Stable Version: 14-08-2017
Stable Release Date: 2017-08-14
Created 2018-08-05
Last Updated 2018-11-02
IF YOU COME FROM 4.2 And want to Upgrade to 5.0 A CLEAN installation is needed !!!!
Reserved 2
For some reason xda duplicated my thread like 4 times, i PMéd a Admin to close those other threads
angelo27093 said:
Reserved
Click to expand...
Click to collapse
I deleted your other post in wrong thread. :good:
your bootloader link is also messed up and alot of your font/size tags. someone was posting in a hurry...
and from what i can gather the link should be pointing to:
https://androidfilehost.com/?fid=5862345805528066293
but that zip is for the galaxy s8 and not for note 8.
edit:
so is the source code link
bober10113 said:
your bootloader link is also messed up and alot of your font/size tags. someone was posting in a hurry...
and from what i can gather the link should be pointing to:
https://androidfilehost.com/?fid=5862345805528066293
but that zip is for the galaxy s8 and not for note 8.
edit:
so is the source code link
Click to expand...
Click to collapse
Thread is stil under contruction and about the source i can remove the GPL Since i am running Stock Samsung Kernel
angelo27093 said:
Thread is stil under contruction
Click to expand...
Click to collapse
for the korean n950n, bootloader from july is still version 3. will it matter? because your base is u4 right...
thanks
bober10113 said:
for the korean n950n, bootloader from july is still version 3. will it matter? because your base is u4 right...
thanks
Click to expand...
Click to collapse
all models should work fine as long as it is a Exynos
angelo27093 said:
all models should work fine as long as it is a Exynos
Click to expand...
Click to collapse
ok thanks
TheMadScientist said:
I deleted your other post in wrong thread. :good:
Click to expand...
Click to collapse
Thank you for some reason i keep getting http 500 error after i try to save my thread edits
angelo27093 said:
all models should work fine as long as it is a Exynos
Click to expand...
Click to collapse
hi, i got an issue:
in aroma, during magisk install stage screen goes black and phone is completely unresponsive.
if i manually force to reboot, device is in bootloop sort of. id does kind of boot but restarts after screen saying upgrading android.
this was when choosing normal wipe
flashed again and same issues as described above.
as stated earlier, this is on an n950n bootloader v3
rom checksum matches the one on AFH
bober10113 said:
hi, i got an issue:
in aroma, during magisk install stage screen goes black and phone is completely unresponsive.
if i manually force to reboot, device is in bootloop. id does kind of boot but restarts after screen saying upgrading android.
this was when choosing normal wipe
flashed again and same issues as described above.
as stated earlier, this is on an n950n
rom checksum matches the one on AFH
Click to expand...
Click to collapse
mmm thats weird do you have telegram ? so you can send my some stuff that i need to check whats going wrong when magisk installs. because someone with the same model is running 4.0 fine without any problems
I have the same problem...can not install. Phone just locks up.
NZCloud said:
I have the same problem...can not install. Phone just locks up.
Click to expand...
Click to collapse
me too, when press install phone just locks up and nothing can do
while installing in aroma, i selected backup and normal wipe, screen went black... n950fd, blackscreen comes as magisk starts installing
bober10113 said:
hi, i got an issue:
in aroma, during magisk install stage screen goes black and phone is completely unresponsive.
if i manually force to reboot, device is in bootloop sort of. id does kind of boot but restarts after screen saying upgrading android.
this was when choosing normal wipe
flashed again and same issues as described above.
as stated earlier, this is on an n950n bootloader v3
rom checksum matches the one on AFH
Click to expand...
Click to collapse
NZCloud said:
I have the same problem...can not install. Phone just locks up.
Click to expand...
Click to collapse
irsemoticon said:
me too, when press install phone just locks up and nothing can do
Click to expand...
Click to collapse
gsser said:
while installing in aroma, i selected backup and normal wipe, screen went black... n950fd, blackscreen comes as magisk starts installing
Click to expand...
Click to collapse
If rom have option to skip root then skip it and flash magisk zip separately after flashing rom will fix issue. It's a known glitch.
If no such option in rom then you can delete magisk zip from Rome zip, flash this modified zip and then magisk.zip
dr.ketan said:
If rom have option to skip root then skip it and flash magisk zip separately after flashing rom will fix issue. It's a known glitch.
If no such option in rom then you can delete magisk zip from Rome zip, flash this modified zip and then magisk.zip
Click to expand...
Click to collapse
i already tried it. when it finishes copying data and system, it just wents black and reboots, but sadly it says 287 apps are optimizing, when it finishes it just do the same thing again so it puts you on bootloop
gsser said:
i already tried it. when it finishes copying data and system, it just wents black and reboots, but sadly it says 287 apps are optimizing, when it finishes it just do the same thing again so it puts you on bootloop
Click to expand...
Click to collapse
That's another issue and dev can only comment, I said is known issue
Make sure Chrome is not debloated, else it can cause such issue
Lets give this one a try

Development [DEPRECATED][ROM][12.1][Mojito][Sunny] PixelOS [OFFICIAL][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements over PixelExperience
Downloads
Get the latest PixelOS Build for Mojito/Sunny Download
Firmware https://xiaomifirmwareupdater.com/firmware/mojito/
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/mojito/recovery/
Note: GApps are included, don't flash separately.​
Notes
• Encryption is enabled by default
• SELinux is enforcing
• GCamGo V2 inbuilt
• NetErnels Kernel
PixelOS Recovery is recommended if you want to stay encrypted, no custom recovery supports encryption on Android12, i.e. you won't be able to decrypt your data.​
Flashing Instructions
Keep in mind...​This ROM comes with EROFS formatting, due to which:
Avoid Changing Kernel (unless it supports EROFS)
System is Read-Only (restricts making changes to overlays, system APKs, etc.)
Avoid using any other recovery than PixelOS recovery which is included (If you wish to use, check for EROFS compatibility)
YOU MUST CLEAN FLASH IF:
You are coming from any other ROM or MIUI
You are coming from May 2022 Update or before
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data
• Flash latest android 12 Global stable firmware (link above)
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash Magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and Magisk (optional)
• Reboot and voila!
Join our Telegram Group https://t.me/PixelOSChat
Source Code
PixelOS http://github.com/PixelOS-Pixelish
Kernel Tree https://github.com/PixelOS-Devices/kernel_xiaomi_mojito
ROM OS Version: Android 12.
ROM Kernel: Linux 4.14.x
Stable Release Date: 01 January 2022
Latest Release Date: 27 June 2022
Reserved #1
Reserved #2
Best rom,i have been using it since november.
Glad to see a thread here
Reserved #3
Switched from Pixel Experience... all i can say is this ROM is far better for me
better performance and multitasking on 4GB model
I love it , Thanks dev!!
5 for me.. almost perfect rom!! thank you so much.. by the way pls port the important google apps.. gmail and google drive.. once again thank you..
Love it this is the best rom so far for this device. Amazing work
Hi, i'm getting error 2 when i try to flash magisk, need some help please !
PS: internal storage showing 0 in twrp
Solved: installed another rom , then formating data in twrp . reverting to this rom and again formating data.
Edit : After OTA update (02/14) wich is not avalable on the official site. i lose recovery and root, and again not able to access memory on twrp to flash anything. twelve !!!argh
Thanks for supporting Redmi Note 10 (mojito).
Website is simple and elegant.
OTA is working: Download of update is fast and install of update is slow but successful.
PixelOS recovery is nice.
headras said:
Hi, i'm getting error 2 when i try to flash magisk, need some help please !
PS: internal storage showing 0 in twrp
Solved: installed another rom , then formating data in twrp . reverting to this rom and again formating data.
Edit : After OTA update (02/14) wich is not avalable on the official site. i lose recovery and root, and again not able to access memory on twrp to flash anything. twelve !!!argh
Click to expand...
Click to collapse
You are not suposed to use twrp. Use pixelos recovery
slickw said:
You are not suposed to use twrp. Use pixelos recovery
Click to expand...
Click to collapse
and it does work for root !
How
slickw said:
Best rom,i have been using it since november.
Glad to see a thread here
Click to expand...
Click to collapse
How is the battery performance on this Rom? Especially the latest version 20220211 because right now I'm using Project Elixir 1.4 and I'm losing 20%+ battery overnight!!
RichezCool said:
How
How is the battery performance on this Rom? Especially the latest version 20220211 because right now I'm using Project Elixir 1.4 and I'm losing 20%+ battery overnight!!
Click to expand...
Click to collapse
I dont realy keep an eye on that if its not an issue. with my usage it last me about 2 days
Heres a screenshot
headras said:
Hi, i'm getting error 2 when i try to flash magisk, need some help please !
PS: internal storage showing 0 in twrp
Solved: installed another rom , then formating data in twrp . reverting to this rom and again formating data.
Edit : After OTA update (02/14) wich is not avalable on the official site. i lose recovery and root, and again not able to access memory on twrp to flash anything. twelve !!!argh
Click to expand...
Click to collapse
You have to sideload magisk, twrp dosent support Android 12
What exactly is the "EEA" firmware? is it region specific? Can I use the global one?
slickw said:
I dont realy keep an eye on that if its not an issue. with my usage it last me about 2 days
Heres a screenshot
Click to expand...
Click to collapse
Okay. So I'll take that to mean the battery backup is good. Can I flash this from Project Elixir 1.4 or do I have to go back to MIUI?
Before I flashed Elixir, I was on MIUI Global 12.5.5.0
Also, I see you are using build 20220214-1347 but the one linked on this website is 202202211-1953.
Where did you get it and which one should I flash?
Thank you for your help in advance.
RasitAyaz said:
What exactly is the "EEA" firmware? is it region specific? Can I use the global one?
Click to expand...
Click to collapse
That firmware is region specific. Please only use the EEA firmware recommended.
See https://forum.xda-developers.com/t/firmware-redmi-note-10-mojito-auto-updated.4254017/post-86317717
RichezCool said:
Okay. So I'll take that to mean the battery backup is good. Can I flash this from Project Elixir 1.4 or do I have to go back to MIUI?
Before I flashed Elixir, I was on MIUI Global 12.5.5.0
Also, I see you are using build 20220214-1347 but the one linked on this website is 202202211-1953.
Where did you get it and which one should I flash?
Thank you for your help in advance.
Click to expand...
Click to collapse
I downloaded and installed the one (202202211-1953) linked on this forum then downloaded and installed 20220214-1347 via the PixelOS in-built updater (OTA). Remember to also flash the PixelOS recovery.
RasitAyaz said:
What exactly is the "EEA" firmware? is it region specific? Can I use the global one?
Click to expand...
Click to collapse
there are versions for global, india and europe, you can use either of the 3

Categories

Resources