Oreo Rom For J5 prime (G570F) official
Flashable by Odin
Link :
https://androidfilehost.com/?fid=1322778262904004464
It is only For G570F
J5 Prime SM-G570Y?
Sent from my SM-N935F using Tapatalk
ALIFKRISNOWO said:
J5 Prime SM-G570Y?
Click to expand...
Click to collapse
It is for G570F
Screenshoot
what about rooting? I tried both Magisk and SuperSu but after phone bootup no SimCard reading.
me too .can't see my network after rooting with magisk
rdzayee said:
what about rooting? I tried both Magisk and SuperSu but after phone bootup no SimCard reading.
Click to expand...
Click to collapse
Idk about root
can someone help convince devs to make a custom kernel for the oreo firmware in order to bypass the network and IMEI number problem on rooted devices. especially those rooted with magisk
Deleted
Guys,
After a day of hard research, I found that the cause of this "no network" shenanigans is due to this line in boot_patch.sh in the Magisk.zip installation file --- "add 750 init magiskinit" \ . This means that during the patch of init (Magisk is embedded in the init according to boot_patch.sh), our radio functions (to be launched through init?) are messed up and that's why we don't have network. I just recently tried to root again and even USB Transfer is not working, just a side note.
Odin Download Problem
Hi, I am trying to download to my J5 Prime but nothing happens. I get the phone in download mode, odin recognizes the phone as well. But when I click start, the mobile screen shows "Downloading" for like 3 seconds and then the phone restarts. Odin just shows "PASS" (like after 4 seconds). Its clearly not downloading at all. What could be the problem. It worked when I download nougat on this phone last year, but doesn't seem to work now. Any ideas on what could be wrong? Thanks in advance! I have enabled USB debugging. The Odin log is given below;
<ID:0/025> Added!!
<ID:0/025> Odin engine v(ID:3.1203)..
<ID:0/025> File analysis..
<ID:0/025> skip file list for home binary
<ID:0/025> sboot.bin.lz4
<ID:0/025> param.bin.lz4
<ID:0/025> cm.bin.lz4
<ID:0/025> boot.img.lz4
<ID:0/025> recovery.img.lz4
<ID:0/025> system.img.lz4
<ID:0/025> userdata.img.lz4
<ID:0/025> cache.img.lz4
<ID:0/025> hidden.img.lz4
<ID:0/025> Home Binary Download
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> SingleDownload.
<ID:0/025> modem.bin
<ID:0/025> Transmission Complete..
<ID:0/025> Now Writing.. Please wait about 2 minutes
<ID:0/025> Receive Response from boot-loader
<ID:0/025> RQT_CLOSE !!
<ID:0/025> RES OK !!
<ID:0/025> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/025> Removed!!
<ID:0/024> Added!!
AdilMasoud said:
Hi, I am trying to download to my J5 Prime but nothing happens. I get the phone in download mode, odin recognizes the phone as well. But when I click start, the mobile screen shows "Downloading" for like 3 seconds and then the phone restarts. Odin just shows "PASS" (like after 4 seconds). Its clearly not downloading at all. What could be the problem. It worked when I download nougat on this phone last year, but doesn't seem to work now. Any ideas on what could be wrong? Thanks in advance! I have enabled USB debugging. The Odin log is given below;
<ID:0/025> Added!!
<ID:0/025> Odin engine v(ID:3.1203)..
<ID:0/025> File analysis..
<ID:0/025> skip file list for home binary
<ID:0/025> sboot.bin.lz4
<ID:0/025> param.bin.lz4
<ID:0/025> cm.bin.lz4
<ID:0/025> boot.img.lz4
<ID:0/025> recovery.img.lz4
<ID:0/025> system.img.lz4
<ID:0/025> userdata.img.lz4
<ID:0/025> cache.img.lz4
<ID:0/025> hidden.img.lz4
<ID:0/025> Home Binary Download
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> SingleDownload.
<ID:0/025> modem.bin
<ID:0/025> Transmission Complete..
<ID:0/025> Now Writing.. Please wait about 2 minutes
<ID:0/025> Receive Response from boot-loader
<ID:0/025> RQT_CLOSE !!
<ID:0/025> RES OK !!
<ID:0/025> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/025> Removed!!
<ID:0/024> Added!!
Click to expand...
Click to collapse
Check if your ODIN is the last version
Tried again with latest Odin
It worked thank you! :good:
G570m official Oreo not much of a difference from 7.0 stock
sm-g570f 8.0 root success ? by anyone
please inform me
Faziljf said:
sm-g570f 8.0 root success ? by anyone
please inform me
Click to expand...
Click to collapse
I can personally confirm that root is working on Oreo J5 Prime, at least for the F variant. No more 'no network problem'. I think the trick is to flash the new_boot.img in TWRP as an additional step (I think the root instruction is illustrated in the main TWRP thread for J5 Prime). Note that there is an irritating SecurityLogAgent notification after root that you can hide via third party apps
PS: I "surprisingly" didnt have the RMM problem. I tried flashing it but it always corrupts my /system partition. Very interesting...
Please iwant rom downgred to 7.0 for g570f
Sent from my SM-G570F using Tapatalk
Complete (write ) operation failed
Hi , m trying to flash the firmware on SM-G570F but I noticed that there is an error in CP file , can anyone help me with this and else send me only the cp file which is working. Please help ,thank you
Does this rom work with sm-570f/dd ? Please let me know
Thank you for the file
Related
Alright so i was flashing the Noob-Proof Odin version of CM10 and when i used Odin to flash the file the operation failed.
The following is what the Odin message is:
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/025> Removed!!
<ID:0/025> Added!!
<ID:0/025> Removed!!
<ID:0/025> Added!!
<ID:0/025> Removed!!
Currently my phone is in download mode, it says Downloading Do not turn off target and the blue bar below it is stuck at around 60%.
Odin also recognizes my phone and well keeps saying Added!!, Removed!! all the time.
My phone was at 40%battery when i started this so im pretty sure battery didnt die midway but i dont know how long the battery will last. What do i do now? have i successfully bricked my phone beyond repair?
I was running criskelo team rom V13 before and made a EFS and Nandroid back up right before starting
My phone was at 40%battery when i started this so im pretty sure battery didnt die midway but i dont know how long the battery will last. What do i do now? have i successfully bricked my phone beyond repair?
Remove battery .
Flash stock rom via Odin with a charged battery .
jje
Stock rom? I cant flash CM10 again? and are you sure removing battery wont damage my phone? it clearly says Dont turn off target.
I just dont want to screw anything up
I would say leave it on wall charger for 30 minutes then flash stock with odin.
I had similar problem but with another phone, 40% battery is not enough.
edit: flashing stock is only to try and save the device, you can try and break it again afterwards
edit2: also by odin flashing 4.0.4 stock then rooting you can flash CM10 on recovery mode and be clear of wifi bug this way.
So i did what you said and again Odin is getting stuck again. This is what it says now. I flashed the XXALE8 firmware. I dont know what im doing wrong. Im currently downloading the XXALE8 firmware again and gonna try again
<ID:0/025> Added!!
<ID:0/025> Removed!!
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_INU_I9300XXALE8_I9300ODDALE5_I9300DDLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> boot.img
<ID:0/025> NAND Write Start!!
<ID:0/025> cache.img
<ID:0/025> hidden.img
<ID:0/025> modem.bin
<ID:0/025> recovery.img
<ID:0/025> system.img
<ID:0/025> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/025> Removed!!
<ID:0/025> Added!!
<ID:0/025> Removed!!
So i downloaded and installed XXALE8 again and this time Odin succesfully installed the rom but im stuck on a bootloop now. What do i do?
ByzLat said:
So i downloaded and installed XXALE8 again and this time Odin succesfully installed the rom but im stuck on a bootloop now. What do i do?
Click to expand...
Click to collapse
Bootloop is an indication that you need to get into recovery now and factory reset. You should be fine from here.
ByzLat said:
So i downloaded and installed XXALE8 again and this time Odin succesfully installed the rom but im stuck on a bootloop now. What do i do?
Click to expand...
Click to collapse
install CWM recovery and enter into recovery using vol up+power+home..from there wipe data+dalvik+cache..this way you will not loose all you data on internal sdcard..
Hello forum,
I am interested in creating a recovery PDA file that I can flash for odin of my Samsung Galaxy Player 5. Could someone go about telling me how it could be done? Thanks in advance.
Jisrest said:
Hello forum,
I am interested in creating a recovery PDA file that I can flash for odin of my Samsung Galaxy Player 5. Could someone go about telling me how it could be done? Thanks in advance.
Click to expand...
Click to collapse
Your mean is you want to backup data in your device？
I think you can use an application named Titanium Backup.
I have no authority to send links.You can search it on the Internet.:silly:
Jisrest said:
Hello forum,
I am interested in creating a recovery PDA file that I can flash for odin of my Samsung Galaxy Player 5. Could someone go about telling me how it could be done? Thanks in advance.
Click to expand...
Click to collapse
On device as root
Code:
dd if=/dev/block/mmcblk0p13 of=/sdcard/factoryfs.rfs
dd if=/dev/block/mmcblk0p11 of=/sdcard/zImage
On pc, put those two files (from /sdcard) in a tar archive.
Would the terminal Emulator do this correctly?
Jisrest said:
Would the terminal Emulator do this correctly?
Click to expand...
Click to collapse
Yes, as long as you run su to give you root access.
Thanks! I will try in a few to see how this goes.
Would this save my account information, WiFi passwords, etc?
Jisrest said:
Thanks! I will try in a few to see how this goes.
Would this save my account information, WiFi passwords, etc?
Click to expand...
Click to collapse
No. That just saves your rom and kernel. For backup purposes, you will need mmcblk0p10 (efs - your wifi and bluetooth addresses), mmcblk0p14 (dbdata), and mmcblk0p16 (/data). mmcblk0p17 is your media/downloads/whatnot, but obviously you cannot copy it into itself. I just don't know the appropriate names for an Odin tar.
And in case you were wondering, partition 1 is an extended partition holding everything else, 2-4 are not used, 5-9 are for the bootloaders, 12 is a backup kernel, and 15 is cache.
You're really helpful and insightful, thank you for your time!
Last question, sorry for being a novice. But.. once I am done with the terminal Emulator, save it as a tar.md5 file and it'll be flashable on odin?
Jisrest said:
You're really helpful and insightful, thank you for your time!
Last question, sorry for being a novice. But.. once I am done with the terminal Emulator, save it as a tar.md5 file and it'll be flashable on odin?
Click to expand...
Click to collapse
No problem.
You will need to transfer the two files to your computer, and use a tool like 7-zip to add them to a tar archive. The tar file's name should not end in .md5, or Odin will expect it to have extra data that isn't there.
I get a failure whenever I attempt to flash with Odin.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factory.rfs
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Jisrest said:
I get a failure whenever I attempt to flash with Odin.
Click to expand...
Click to collapse
It should be factoryfs.rfs.
7-Zip is renaming it.
Tried for a third time, and got this error..
Code:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.rfs
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe it's that I don't have PARAM, SBL, and BOOT?
Doing further testing I believe its my player acting up.
Jisrest said:
Tried for a third time, and got this error..
Code:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.rfs
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe it's that I don't have PARAM, SBL, and BOOT?
Doing further testing I believe its my player acting up.
Click to expand...
Click to collapse
I'm not sure what your issue is -it seems right- but I hope you still get it to work.
Thank you.. but im giving up. I guess im not meant for this.
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
mdahlke said:
My phone has gone into emergency recover and I've tried to recover it by flashing it with both "Odin" and the samsung "SimpleUpgradeTool" but it has failed everytime I've tried it.
I have the SCH-530 from US Cellular and am unsure on what to try next.
Any and all help is greatly appreciated.
The following is the ouput message from Odin ---
Code:
Odin v.3 engine (ID:3)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
cache.img
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
While flashing with odin make sure ur kies is completly closed or from kies tools, preferences, uncheck option open kies while phone connects restart and try should work
Sent from my GT-I9500 using xda premium
I have the SCH-530 from US Cellular and am unsure on what to try next. Wrong forum its not I9300 . Firmware / mods from here will brick your phone . jje
Hi!
So a question I think I hard bricked my S3
I've installed the lollipop custom rom on it and it worked fine for 3-4 of days after one night charging I found device unresponsive so I've pull the battery out and now I get this when device is turning on:
i.imgur.com/TV5xhAh.jpg
Do you know guys what happen?
I can go in to download mode but Odin doesn't allow nothing pass giving an error:
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
Or when I try do add pit:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you guys know what I may have done? Is there any solution to this?
Thanks for any help or info
lpooltech-uk said:
Hi!
So a question I think I hard bricked my S3
I've installed the lollipop custom rom on it and it worked fine for 3-4 of days after one night charging I found device unresponsive so I've pull the battery out and now I get this when device is turning on:
i.imgur.com/TV5xhAh.jpg
Do you know guys what happen?
I can go in to download mode but Odin doesn't allow nothing pass giving an error:
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
Or when I try do add pit:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you guys know what I may have done? Is there any solution to this?
Thanks for any help or info
Click to expand...
Click to collapse
You don’t need Odin to flash something, you can flash a zip file from your custom recovery.
josephiskandar said:
You don’t need Odin to flash something, you can flash a zip file from your custom recovery.
Click to expand...
Click to collapse
Hey I can't access the recovery just the download mod and nothing else
lpooltech-uk said:
Hey I can't access the recovery just the download mod and nothing else
Click to expand...
Click to collapse
Ok you hadn’t mentioned it so I thought you might be able to.
A hard brick is when you cannot boot your phone into any mode.
From what I’ve read your case is called a sudden death (SDS), so try to search for it.
lpooltech-uk said:
Hi!
So a question I think I hard bricked my S3
I've installed the lollipop custom rom on it and it worked fine for 3-4 of days after one night charging I found device unresponsive so I've pull the battery out and now I get this when device is turning on:
i.imgur.com/TV5xhAh.jpg
Do you know guys what happen?
I can go in to download mode but Odin doesn't allow nothing pass giving an error:
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
Or when I try do add pit:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Do you guys know what I may have done? Is there any solution to this?
Thanks for any help or info
Click to expand...
Click to collapse
You need service repair seen many posts like this example >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << white screen is the sign of the complete eMMC failure I have not seen any posts that have solved this with a software solution.
tallman43 said:
You need service repair seen many posts like this example >> http://forum.xda-developers.com/galaxy-s3/help/problem-white-screen-black-lines-rain-t2467459 << white screen is the sign of the complete eMMC failure I have not seen any posts that have solved this with a software solution.
Click to expand...
Click to collapse
Thank you for the answer! I already replaced my phone with New one but I wonder would change of the motherboard help me I see few not too expensive on eBay.
lpooltech-uk said:
Thank you for the answer! I already replaced my phone with New one but I wonder would change of the motherboard help me I see few not too expensive on eBay.
Click to expand...
Click to collapse
There are in fact some cheap used motherboards sold on eBay.
If you feel confident with replacing it, all steps are explained in images and video.
Be careful as you may need to take off the rear camera from your old motherboard and plug it on the new one.
Hello i have a Galaxy S5 G900A running 5.0 lollipop. But after flashing xposed.zip through flashfire my phone shows AT&t logo for a while and then power off. I try to flash through odin but each Time get these error. I have tried Downgrade-to-NEC, Stock 4.4.2 firmware but it not flashing it just giving me these errors
Odin logs
<ID:0/020> Added!!
<ID:0/020> Odin engine v(ID:3.1100)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> SingleDownload.
<ID:0/020> boot.img
<ID:0/020> NAND Write Start!!
<ID:0/020> recovery.img
<ID:0/020> system.img.ext4
<ID:0/020> FAIL! (Auth)
<ID:0/020>
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On phone
SW-Rev Check fail: Refer 3 > Binary 1
Secure check fail: System
I am facing this problem for more than a week so kindly give me the solution for this.