When I click unlock on the mi unlock tool it stops at 99% and says to associate my account with my device in developer settings which I have already done so please any help would be appreciated
Sure I'll help you. Read the other threads!
Hi, can someone help me? My eva l19 (bootloader unlocked) it's hard bricked, can I flash something from normal mode?
I have actived debug usb and unlock oem,
emanuelenasta said:
Hi, can someone help me? My eva l19 (bootloader unlocked) it's hard bricked, can I flash something from normal mode? I have actived debug usb and unlock oem,
Click to expand...
Click to collapse
I don't have this device but, I believe that one or more of the following threads should be helpful for what you need and don't be afraid to ask for some member guidance within one of them too.
https://forum.xda-developers.com/showthread.php?t=3628656
https://forum.xda-developers.com/showthread.php?t=3677369
https://forum.xda-developers.com/showthread.php?t=3496091
https://forum.xda-developers.com/showthread.php?t=3694581
If all else fails, and as your last resort, you can always try to obtain some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3527626
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
As you all know, the site to obtain bootloader unlock codes is currently down. It certainly has me distraught specifically for the View10 community which I'm working hard to grow and make successful. This is only a speed bump. I'm am still trying to figure out what is going on and working to get it back. (I don't directly handle it).
I know the very importance of having an easy method to unlock the bootloader of a device and this certainly has thrown a wrench into things.
So, to get around this hiccup, I have setup a Google form for users to fill out with the appropriate information in order to request a bootloader unlock code. One of my colleagues will have access to the spreadsheet that the data dumps into and will update it with the unlock codes. I will then email you your unlock code. Turn around time we're looking at is about ~24hrs (not including weekends).
This is not ideal but I feel this is the next best thing until we sort out the site and what exactly is going on.
I'm thankful for everyone's patience with this and all the developer's support for our device
Please follow this link to request an unlock code: Feel free to share this to other users as this is not specific to View10
https://goo.gl/forms/ZdYFEQXRzly9e2Bt2
Cheers,
Chris
UPDATE:
Having to halt unlock code requests and will be closing the form till further notice.
Our team is aware of the site being down and working to bring more info sometime in May.
Appreciate your understanding.
Chris
The unlock site is back! But at this time for only 60 days. If you need to unlock the bootloader of any Honor or Huawei devices please get the code now and keep it safe. If there are changes to this I'll keep everyone posted.
https://emui.huawei.com/en/unlock_detail
-Chris
Sending emails out to the first ~100 users requesting their unlock codes. It'll take time, please be patient.
Thanks!
Thanks for arranging alterative solution. Submitting one of my phone's details
In what format is device model number?
Huawei p20 pro CLT - L29 c636
Is this correct? ?
frewys said:
In what format is device model number?
Huawei p20 pro CLT - L29 c636
Is this correct? ?
Click to expand...
Click to collapse
Either are fine
Thank you! The phone looks incredible, I'm really looking forward to unlocking its full potential!
Unlocked! Thank you Chris!
Thanks for your great support Chris.
Can you also take some effort to provide the below:
1. VoLTE kernel sources to make utilize of custom roms to the full extent.
2. Regular EMUI updates for Indian version of View 10.
Thanks
We are currently out of lookup requests for unlock codes. We will have to request more Monday. We did not expect to receive over 1000 submissions in less than 72hrs.
[email protected]_USA said:
We are currently out of lookup requests for unlock codes. We will have to request more Monday. We did not expect to receive over 1000 submissions in less than 72hrs.
Click to expand...
Click to collapse
Wow! If only they left the link up. I do appreciate all of your support, going above & beyond what you initially intended to do I'm certain of that. Thank you for my code as well.
@[email protected]_USA
Hi chris,
i fill your forms and hope !
i think the problem is : china have firewall higher to disconnect chinese-user from out-country.
[email protected]_USA said:
Cheers,
Chris
Click to expand...
Click to collapse
Hi mate!
I really do hope that I wasn't too late guns you'll be able to get more codes...
My wife and me just bought 2 v10 some minutes ago and I hoped to unlock them as soon as possible... Now I hopefully will be able at all?
Thanks in advance and thanks for your work and efforts for the community - keep it up!!
Cheers,
René
Gesendet von meinem MHA-L29 mit Tapatalk
A boot loader unlock error occurs.
Please refer to the picture.
Is there a way to resolve the error code?
error code: "failed (remote: check password failed!)"
kischde said:
Hi mate!
I really do hope that I wasn't too late guns you'll be able to get more codes...
My wife and me just bought 2 v10 some minutes ago and I hoped to unlock them as soon as possible... Now I hopefully will be able at all?
Thanks in advance and thanks for your work and efforts for the community - keep it up!!
Cheers,
René
Click to expand...
Click to collapse
It needs just time because of so many requests
Rommco05 said:
Just question fastboot oem unlock?
Click to expand...
Click to collapse
china model(bkl-al20) ▶changed the status to bkl-l09
oem is unlocked.
also checked the usb debugging mode.
The current ROM is not bkl-al20, but bkl-l09.
The seller replaced the ROM.
[email protected]_USA said:
Either are fine
Click to expand...
Click to collapse
Tha k you it worked ?
Sent from my CLT-L29 using XDA Labs
Think the reason the bootloader unlock code does not recognize is probably because the device does not recognize it in adb mode or it recognizes the wrong number.
If the device is not recognized as adb mode, is the boot loader unlock code not recognized?
If there is a problem with device recognition, is there a way to recognize the device in adb mode?
If the bootloader unlock code is wrong, should we talk to @[email protected]_USA?
changikman said:
Think the reason the bootloader unlock code does not recognize is probably because the device does not recognize it in adb mode or it recognizes the wrong number.
If the device is not recognized as adb mode, is the boot loader unlock code not recognized?
If there is a problem with device recognition, is there a way to recognize the device in adb mode?
If the bootloader unlock code is wrong, should we talk to @[email protected]_USA?
Click to expand...
Click to collapse
I dont think the bootloader unlock code is wrong! But check again your settings...
You must enable Developer Options (7x click on Build Number in settings "About phone")
In Developer Options it is required to enable OEM Unlock.
And you must enable ADB Debugging in charging mode (before USB Debugging) and finally USB Debugging (if you enable USB Debugging before ADB Debugging, USB Debugging will not stay enabled and is disabled soon you leave the settings...)
If you have USB connected with the Phone (and the drivers must be installed automatically by windows, if not use HiSuite by Huawei to connect phone and close HiSuite after in the background) -
and you open Minimal ADB and Fastboot in administrative mode, type:
adb devices
On Phone Screen you receive a RSA Request and you must except with "always from this computer" and okay.
With:
adb reboot bootloader
you enter Fastboot Mode.
On Screen FRP must be unlocked
With:
fastboot oem unlock codexxx..
you flash the Unlock Code and confirm on phone screen.
After automatically Factoryreset reset with low-level wipe appears.
Unlock code for Indian user
[email protected]_USA said:
I'm thankful for everyone's patience with this and all the developer's support for our device
Please follow this link to request an unlock code: Feel free to share this to other users as this is not specific to View10
Cheers,
Chris
Click to expand...
Click to collapse
Dear Chris, I am a new Honor 8 Pro user from India. I have filled up the form above and was looking forward to the unlock code.
Thanks for all your efforts,
Regards, Abhas.
Just an update for everyone, having to halt unlock code requests and will be closing the form till further notice.
Our team is aware of the site being down and working to bring more info sometime in May.
Appreciate your understanding.
Chris
Hello Guys,
i am in trouble i broke my device and now my device is not turn on.i manage to run in edl mode but after start flashing i got the error"your account is unauthorised for this operation"
i really need Help please tell me how i can fix my device ..
thanks in advance.
dx009 said:
Hello Guys,
i am in trouble i broke my device and now my device is not turn on.i manage to run in edl mode but after start flashing i got the error"your account is unauthorised for this operation"
i really need Help please tell me how i can fix my device ..
thanks in advance.
Click to expand...
Click to collapse
Please describe the current status of your device. If your device is unlocked, you can enter fastboot and flash with miflash. If your device is not unlocked, please go to the after-sales service for help, or you need to pay to request a merchant with an edl account to help you flash the phone
i edit some script file and flash it via TWRP.
that time my phone can't boot.
so i tried with edl mode and it asking for an authorized Xiaomi account to flash the firmware.
my Xiaomi account not authorized i don't know why..
dx009 said:
i edit some script file and flash it via TWRP.
that time my phone can't boot.
so i tried with edl mode and it asking for an authorized Xiaomi account to flash the firmware.
my Xiaomi account not authorized i don't know why..
Click to expand...
Click to collapse
Now only Xiaomi official service personnel can operate the edl flashing of Xiaomi mobile phones, and ordinary people do not have this permission
Sharing this here as I’m sure many people have been waiting for something like this.
This guide will allow you to unlock the bootloader on your US mmWave variant Xperia 1 IV (XQ-CT62).
This is using the new qunlock tool from Infinity Box. You need to buy a token from a reseller.
I used this reseller and it took a few days to get the email. https://***/server/Sony-Xperia-Cable-Unlock--FRP-Removal--0-Counter-Supported--qUnlock-S1-Unlock-Tool?pid=3
Another Xperia 1 IV owner used this reseller and got his token immediately, link here: https://***/resellerpricing/server
Download the tool (qUnlockTool.7z) from infinitybox here: https://***/00/pub.php?dir=software/other/qUnlockTool
Archive pw is 1111
Mod. edit: links removed. alecxs
Run the tool, turn phone off. Click “sim unlock”, after putting in your token. Then, hold the volume down key on your phone while plugging it in to a usb port until the notification LED turns green and the tool recognizes it. Make sure you have the drivers installed from the archive before trying.
If successful it will say “calculating”, will generate the unlock for you server side, then write to the TA partition and flip the bootloader unlock flag to true.
When complete, unplug and boot into android. You will see “bootloader unlockable = true” in the service menu. Enable OEM unlocking in developer settings, then reboot to fastboot using ADB or by holding volume snd plugging in to USB with the device off.
Follow the instructions for unlocking the bootloader on Sony’s website: select Xperia 1 IV, and generate the unlock code. Paste the unlock code into fastboot, then do fastboot oem unlock.
You do lose widevine L1 and you also lose the TEE key, so only basic attestation is working, as expected and as was the case with the Xperia 1 III as well.
Relocking the bootloader will restore the keys.
So first off, this worked. Thank you so much!
2nd of all traditionally talking about that particular tool (because it is paid) is frowned on this forum. Might have to sanitize the post a little!
Hello @xian1243,
I've closed the thread and removed the hyperlinks to paid services according to our forum rules #7, #11, #13.
XDA-Developers FORUM RULES
Please refrain from sharing such links in future. Thanks for your cooperation.
regards
alecxs
moderator